URL https://opencores.org/ocsvn/test_project/test_project/trunk
Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [drivers/] [pci/] [probe.c] - Blame information for rev 65

Go to most recent revision | Details | Compare with Previous | View Log

/*
 * probe.c - PCI detection and setup code
 */
 
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/cpumask.h>
#include "pci.h"
 
#define CARDBUS_LATENCY_TIMER   176     /* secondary latency timer */
#define CARDBUS_RESERVE_BUSNR   3
#define PCI_CFG_SPACE_SIZE      256
#define PCI_CFG_SPACE_EXP_SIZE  4096
 
/* Ugh.  Need to stop exporting this to modules. */
LIST_HEAD(pci_root_buses);
EXPORT_SYMBOL(pci_root_buses);
 
LIST_HEAD(pci_devices);
 
/*
 * Some device drivers need know if pci is initiated.
 * Basically, we think pci is not initiated when there
 * is no device in list of pci_devices.
 */
int no_pci_devices(void)
{
        return list_empty(&pci_devices);
}
 
EXPORT_SYMBOL(no_pci_devices);
 
#ifdef HAVE_PCI_LEGACY
/**
 * pci_create_legacy_files - create legacy I/O port and memory files
 * @b: bus to create files under
 *
 * Some platforms allow access to legacy I/O port and ISA memory space on
 * a per-bus basis.  This routine creates the files and ties them into
 * their associated read, write and mmap files from pci-sysfs.c
 */
static void pci_create_legacy_files(struct pci_bus *b)
{
        b->legacy_io = kzalloc(sizeof(struct bin_attribute) * 2,
                               GFP_ATOMIC);
        if (b->legacy_io) {
                b->legacy_io->attr.name = "legacy_io";
                b->legacy_io->size = 0xffff;
                b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
                b->legacy_io->read = pci_read_legacy_io;
                b->legacy_io->write = pci_write_legacy_io;
                class_device_create_bin_file(&b->class_dev, b->legacy_io);
 
                /* Allocated above after the legacy_io struct */
                b->legacy_mem = b->legacy_io + 1;
                b->legacy_mem->attr.name = "legacy_mem";
                b->legacy_mem->size = 1024*1024;
                b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
                b->legacy_mem->mmap = pci_mmap_legacy_mem;
                class_device_create_bin_file(&b->class_dev, b->legacy_mem);
        }
}
 
void pci_remove_legacy_files(struct pci_bus *b)
{
        if (b->legacy_io) {
                class_device_remove_bin_file(&b->class_dev, b->legacy_io);
                class_device_remove_bin_file(&b->class_dev, b->legacy_mem);
                kfree(b->legacy_io); /* both are allocated here */
        }
}
#else /* !HAVE_PCI_LEGACY */
static inline void pci_create_legacy_files(struct pci_bus *bus) { return; }
void pci_remove_legacy_files(struct pci_bus *bus) { return; }
#endif /* HAVE_PCI_LEGACY */
 
/*
 * PCI Bus Class Devices
 */
static ssize_t pci_bus_show_cpuaffinity(struct class_device *class_dev,
                                        char *buf)
{
        int ret;
        cpumask_t cpumask;
 
        cpumask = pcibus_to_cpumask(to_pci_bus(class_dev));
        ret = cpumask_scnprintf(buf, PAGE_SIZE, cpumask);
        if (ret < PAGE_SIZE)
                buf[ret++] = '\n';
        return ret;
}
CLASS_DEVICE_ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpuaffinity, NULL);
 
/*
 * PCI Bus Class
 */
static void release_pcibus_dev(struct class_device *class_dev)
{
        struct pci_bus *pci_bus = to_pci_bus(class_dev);
 
        if (pci_bus->bridge)
                put_device(pci_bus->bridge);
        kfree(pci_bus);
}
 
static struct class pcibus_class = {
        .name           = "pci_bus",
        .release        = &release_pcibus_dev,
};
 
static int __init pcibus_class_init(void)
{
        return class_register(&pcibus_class);
}
postcore_initcall(pcibus_class_init);
 
/*
 * Translate the low bits of the PCI base
 * to the resource type
 */
static inline unsigned int pci_calc_resource_flags(unsigned int flags)
{
        if (flags & PCI_BASE_ADDRESS_SPACE_IO)
                return IORESOURCE_IO;
 
        if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
                return IORESOURCE_MEM | IORESOURCE_PREFETCH;
 
        return IORESOURCE_MEM;
}
 
/*
 * Find the extent of a PCI decode..
 */
static u32 pci_size(u32 base, u32 maxbase, u32 mask)
{
        u32 size = mask & maxbase;      /* Find the significant bits */
        if (!size)
                return 0;
 
        /* Get the lowest of them to find the decode size, and
           from that the extent.  */
        size = (size & ~(size-1)) - 1;
 
        /* base == maxbase can be valid only if the BAR has
           already been programmed with all 1s.  */
        if (base == maxbase && ((base | size) & mask) != mask)
                return 0;
 
        return size;
}
 
static u64 pci_size64(u64 base, u64 maxbase, u64 mask)
{
        u64 size = mask & maxbase;      /* Find the significant bits */
        if (!size)
                return 0;
 
        /* Get the lowest of them to find the decode size, and
           from that the extent.  */
        size = (size & ~(size-1)) - 1;
 
        /* base == maxbase can be valid only if the BAR has
           already been programmed with all 1s.  */
        if (base == maxbase && ((base | size) & mask) != mask)
                return 0;
 
        return size;
}
 
static inline int is_64bit_memory(u32 mask)
{
        if ((mask & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
            (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64))
                return 1;
        return 0;
}
 
static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
{
        unsigned int pos, reg, next;
        u32 l, sz;
        struct resource *res;
 
        for(pos=0; pos<howmany; pos = next) {
                u64 l64;
                u64 sz64;
                u32 raw_sz;
 
                next = pos+1;
                res = &dev->resource[pos];
                res->name = pci_name(dev);
                reg = PCI_BASE_ADDRESS_0 + (pos << 2);
                pci_read_config_dword(dev, reg, &l);
                pci_write_config_dword(dev, reg, ~0);
                pci_read_config_dword(dev, reg, &sz);
                pci_write_config_dword(dev, reg, l);
                if (!sz || sz == 0xffffffff)
                        continue;
                if (l == 0xffffffff)
                        l = 0;
                raw_sz = sz;
                if ((l & PCI_BASE_ADDRESS_SPACE) ==
                                PCI_BASE_ADDRESS_SPACE_MEMORY) {
                        sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
                        /*
                         * For 64bit prefetchable memory sz could be 0, if the
                         * real size is bigger than 4G, so we need to check
                         * szhi for that.
                         */
                        if (!is_64bit_memory(l) && !sz)
                                continue;
                        res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
                        res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
                } else {
                        sz = pci_size(l, sz, PCI_BASE_ADDRESS_IO_MASK & 0xffff);
                        if (!sz)
                                continue;
                        res->start = l & PCI_BASE_ADDRESS_IO_MASK;
                        res->flags |= l & ~PCI_BASE_ADDRESS_IO_MASK;
                }
                res->end = res->start + (unsigned long) sz;
                res->flags |= pci_calc_resource_flags(l);
                if (is_64bit_memory(l)) {
                        u32 szhi, lhi;
 
                        pci_read_config_dword(dev, reg+4, &lhi);
                        pci_write_config_dword(dev, reg+4, ~0);
                        pci_read_config_dword(dev, reg+4, &szhi);
                        pci_write_config_dword(dev, reg+4, lhi);
                        sz64 = ((u64)szhi << 32) | raw_sz;
                        l64 = ((u64)lhi << 32) | l;
                        sz64 = pci_size64(l64, sz64, PCI_BASE_ADDRESS_MEM_MASK);
                        next++;
#if BITS_PER_LONG == 64
                        if (!sz64) {
                                res->start = 0;
                                res->end = 0;
                                res->flags = 0;
                                continue;
                        }
                        res->start = l64 & PCI_BASE_ADDRESS_MEM_MASK;
                        res->end = res->start + sz64;
#else
                        if (sz64 > 0x100000000ULL) {
                                printk(KERN_ERR "PCI: Unable to handle 64-bit "
                                        "BAR for device %s\n", pci_name(dev));
                                res->start = 0;
                                res->flags = 0;
                        } else if (lhi) {
                                /* 64-bit wide address, treat as disabled */
                                pci_write_config_dword(dev, reg,
                                        l & ~(u32)PCI_BASE_ADDRESS_MEM_MASK);
                                pci_write_config_dword(dev, reg+4, 0);
                                res->start = 0;
                                res->end = sz;
                        }
#endif
                }
        }
        if (rom) {
                dev->rom_base_reg = rom;
                res = &dev->resource[PCI_ROM_RESOURCE];
                res->name = pci_name(dev);
                pci_read_config_dword(dev, rom, &l);
                pci_write_config_dword(dev, rom, ~PCI_ROM_ADDRESS_ENABLE);
                pci_read_config_dword(dev, rom, &sz);
                pci_write_config_dword(dev, rom, l);
                if (l == 0xffffffff)
                        l = 0;
                if (sz && sz != 0xffffffff) {
                        sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
                        if (sz) {
                                res->flags = (l & IORESOURCE_ROM_ENABLE) |
                                  IORESOURCE_MEM | IORESOURCE_PREFETCH |
                                  IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
                                res->start = l & PCI_ROM_ADDRESS_MASK;
                                res->end = res->start + (unsigned long) sz;
                        }
                }
        }
}
 
void pci_read_bridge_bases(struct pci_bus *child)
{
        struct pci_dev *dev = child->self;
        u8 io_base_lo, io_limit_lo;
        u16 mem_base_lo, mem_limit_lo;
        unsigned long base, limit;
        struct resource *res;
        int i;
 
        if (!dev)               /* It's a host bus, nothing to read */
                return;
 
        if (dev->transparent) {
                printk(KERN_INFO "PCI: Transparent bridge - %s\n", pci_name(dev));
                for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
                        child->resource[i] = child->parent->resource[i - 3];
        }
 
        for(i=0; i<3; i++)
                child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
 
        res = child->resource[0];
        pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
        pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
        base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
        limit = (io_limit_lo & PCI_IO_RANGE_MASK) << 8;
 
        if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
                u16 io_base_hi, io_limit_hi;
                pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
                pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
                base |= (io_base_hi << 16);
                limit |= (io_limit_hi << 16);
        }
 
        if (base <= limit) {
                res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
                if (!res->start)
                        res->start = base;
                if (!res->end)
                        res->end = limit + 0xfff;
        }
 
        res = child->resource[1];
        pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
        pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
        base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
        limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
        if (base <= limit) {
                res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
                res->start = base;
                res->end = limit + 0xfffff;
        }
 
        res = child->resource[2];
        pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
        pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
        base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
        limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
 
        if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
                u32 mem_base_hi, mem_limit_hi;
                pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
                pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
 
                /*
                 * Some bridges set the base > limit by default, and some
                 * (broken) BIOSes do not initialize them.  If we find
                 * this, just assume they are not being used.
                 */
                if (mem_base_hi <= mem_limit_hi) {
#if BITS_PER_LONG == 64
                        base |= ((long) mem_base_hi) << 32;
                        limit |= ((long) mem_limit_hi) << 32;
#else
                        if (mem_base_hi || mem_limit_hi) {
                                printk(KERN_ERR "PCI: Unable to handle 64-bit address space for bridge %s\n", pci_name(dev));
                                return;
                        }
#endif
                }
        }
        if (base <= limit) {
                res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
                res->start = base;
                res->end = limit + 0xfffff;
        }
}
 
static struct pci_bus * pci_alloc_bus(void)
{
        struct pci_bus *b;
 
        b = kzalloc(sizeof(*b), GFP_KERNEL);
        if (b) {
                INIT_LIST_HEAD(&b->node);
                INIT_LIST_HEAD(&b->children);
                INIT_LIST_HEAD(&b->devices);
        }
        return b;
}
 
static struct pci_bus * __devinit
pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr)
{
        struct pci_bus *child;
        int i;
        int retval;
 
        /*
         * Allocate a new bus, and inherit stuff from the parent..
         */
        child = pci_alloc_bus();
        if (!child)
                return NULL;
 
        child->self = bridge;
        child->parent = parent;
        child->ops = parent->ops;
        child->sysdata = parent->sysdata;
        child->bus_flags = parent->bus_flags;
        child->bridge = get_device(&bridge->dev);
 
        child->class_dev.class = &pcibus_class;
        sprintf(child->class_dev.class_id, "%04x:%02x", pci_domain_nr(child), busnr);
        retval = class_device_register(&child->class_dev);
        if (retval)
                goto error_register;
        retval = class_device_create_file(&child->class_dev,
                                          &class_device_attr_cpuaffinity);
        if (retval)
                goto error_file_create;
 
        /*
         * Set up the primary, secondary and subordinate
         * bus numbers.
         */
        child->number = child->secondary = busnr;
        child->primary = parent->secondary;
        child->subordinate = 0xff;
 
        /* Set up default resource pointers and names.. */
        for (i = 0; i < 4; i++) {
                child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
                child->resource[i]->name = child->name;
        }
        bridge->subordinate = child;
 
        return child;
 
error_file_create:
        class_device_unregister(&child->class_dev);
error_register:
        kfree(child);
        return NULL;
}
 
struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
{
        struct pci_bus *child;
 
        child = pci_alloc_child_bus(parent, dev, busnr);
        if (child) {
                down_write(&pci_bus_sem);
                list_add_tail(&child->node, &parent->children);
                up_write(&pci_bus_sem);
        }
        return child;
}
 
static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
{
        struct pci_bus *parent = child->parent;
 
        /* Attempts to fix that up are really dangerous unless
           we're going to re-assign all bus numbers. */
        if (!pcibios_assign_all_busses())
                return;
 
        while (parent->parent && parent->subordinate < max) {
                parent->subordinate = max;
                pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
                parent = parent->parent;
        }
}
 
unsigned int pci_scan_child_bus(struct pci_bus *bus);
 
/*
 * If it's a bridge, configure it and scan the bus behind it.
 * For CardBus bridges, we don't scan behind as the devices will
 * be handled by the bridge driver itself.
 *
 * We need to process bridges in two passes -- first we scan those
 * already configured by the BIOS and after we are done with all of
 * them, we proceed to assigning numbers to the remaining buses in
 * order to avoid overlaps between old and new bus numbers.
 */
int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass)
{
        struct pci_bus *child;
        int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
        u32 buses, i, j = 0;
        u16 bctl;
 
        pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
 
        pr_debug("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
                 pci_name(dev), buses & 0xffffff, pass);
 
        /* Disable MasterAbortMode during probing to avoid reporting
           of bus errors (in some architectures) */
        pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
        pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
                              bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
 
        if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) {
                unsigned int cmax, busnr;
                /*
                 * Bus already configured by firmware, process it in the first
                 * pass and just note the configuration.
                 */
                if (pass)
                        goto out;
                busnr = (buses >> 8) & 0xFF;
 
                /*
                 * If we already got to this bus through a different bridge,
                 * ignore it.  This can happen with the i450NX chipset.
                 */
                if (pci_find_bus(pci_domain_nr(bus), busnr)) {
                        printk(KERN_INFO "PCI: Bus %04x:%02x already known\n",
                                        pci_domain_nr(bus), busnr);
                        goto out;
                }
 
                child = pci_add_new_bus(bus, dev, busnr);
                if (!child)
                        goto out;
                child->primary = buses & 0xFF;
                child->subordinate = (buses >> 16) & 0xFF;
                child->bridge_ctl = bctl;
 
                cmax = pci_scan_child_bus(child);
                if (cmax > max)
                        max = cmax;
                if (child->subordinate > max)
                        max = child->subordinate;
        } else {
                /*
                 * We need to assign a number to this bus which we always
                 * do in the second pass.
                 */
                if (!pass) {
                        if (pcibios_assign_all_busses())
                                /* Temporarily disable forwarding of the
                                   configuration cycles on all bridges in
                                   this bus segment to avoid possible
                                   conflicts in the second pass between two
                                   bridges programmed with overlapping
                                   bus ranges. */
                                pci_write_config_dword(dev, PCI_PRIMARY_BUS,
                                                       buses & ~0xffffff);
                        goto out;
                }
 
                /* Clear errors */
                pci_write_config_word(dev, PCI_STATUS, 0xffff);
 
                /* Prevent assigning a bus number that already exists.
                 * This can happen when a bridge is hot-plugged */
                if (pci_find_bus(pci_domain_nr(bus), max+1))
                        goto out;
                child = pci_add_new_bus(bus, dev, ++max);
                buses = (buses & 0xff000000)
                      | ((unsigned int)(child->primary)     <<  0)
                      | ((unsigned int)(child->secondary)   <<  8)
                      | ((unsigned int)(child->subordinate) << 16);
 
                /*
                 * yenta.c forces a secondary latency timer of 176.
                 * Copy that behaviour here.
                 */
                if (is_cardbus) {
                        buses &= ~0xff000000;
                        buses |= CARDBUS_LATENCY_TIMER << 24;
                }
 
                /*
                 * We need to blast all three values with a single write.
                 */
                pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
 
                if (!is_cardbus) {
                        child->bridge_ctl = bctl;
                        /*
                         * Adjust subordinate busnr in parent buses.
                         * We do this before scanning for children because
                         * some devices may not be detected if the bios
                         * was lazy.
                         */
                        pci_fixup_parent_subordinate_busnr(child, max);
                        /* Now we can scan all subordinate buses... */
                        max = pci_scan_child_bus(child);
                        /*
                         * now fix it up again since we have found
                         * the real value of max.
                         */
                        pci_fixup_parent_subordinate_busnr(child, max);
                } else {
                        /*
                         * For CardBus bridges, we leave 4 bus numbers
                         * as cards with a PCI-to-PCI bridge can be
                         * inserted later.
                         */
                        for (i=0; i<CARDBUS_RESERVE_BUSNR; i++) {
                                struct pci_bus *parent = bus;
                                if (pci_find_bus(pci_domain_nr(bus),
                                                        max+i+1))
                                        break;
                                while (parent->parent) {
                                        if ((!pcibios_assign_all_busses()) &&
                                            (parent->subordinate > max) &&
                                            (parent->subordinate <= max+i)) {
                                                j = 1;
                                        }
                                        parent = parent->parent;
                                }
                                if (j) {
                                        /*
                                         * Often, there are two cardbus bridges
                                         * -- try to leave one valid bus number
                                         * for each one.
                                         */
                                        i /= 2;
                                        break;
                                }
                        }
                        max += i;
                        pci_fixup_parent_subordinate_busnr(child, max);
                }
                /*
                 * Set the subordinate bus number to its real value.
                 */
                child->subordinate = max;
                pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
        }
 
        sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
 
        /* Has only triggered on CardBus, fixup is in yenta_socket */
        while (bus->parent) {
                if ((child->subordinate > bus->subordinate) ||
                    (child->number > bus->subordinate) ||
                    (child->number < bus->number) ||
                    (child->subordinate < bus->number)) {
                        pr_debug("PCI: Bus #%02x (-#%02x) is %s"
                                "hidden behind%s bridge #%02x (-#%02x)\n",
                                child->number, child->subordinate,
                                (bus->number > child->subordinate &&
                                 bus->subordinate < child->number) ?
                                        "wholly " : " partially",
                                bus->self->transparent ? " transparent" : " ",
                                bus->number, bus->subordinate);
                }
                bus = bus->parent;
        }
 
out:
        pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
 
        return max;
}
 
/*
 * Read interrupt line and base address registers.
 * The architecture-dependent code can tweak these, of course.
 */
static void pci_read_irq(struct pci_dev *dev)
{
        unsigned char irq;
 
        pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
        dev->pin = irq;
        if (irq)
                pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
        dev->irq = irq;
}
 
#define LEGACY_IO_RESOURCE      (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
 
/**
 * pci_setup_device - fill in class and map information of a device
 * @dev: the device structure to fill
 *
 * Initialize the device structure with information about the device's
 * vendor,class,memory and IO-space addresses,IRQ lines etc.
 * Called at initialisation of the PCI subsystem and by CardBus services.
 * Returns 0 on success and -1 if unknown type of device (not normal, bridge
 * or CardBus).
 */
static int pci_setup_device(struct pci_dev * dev)
{
        u32 class;
 
        sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
                dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
 
        pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
        dev->revision = class & 0xff;
        class >>= 8;                                /* upper 3 bytes */
        dev->class = class;
        class >>= 8;
 
        pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
                 dev->vendor, dev->device, class, dev->hdr_type);
 
        /* "Unknown power state" */
        dev->current_state = PCI_UNKNOWN;
 
        /* Early fixups, before probing the BARs */
        pci_fixup_device(pci_fixup_early, dev);
        class = dev->class >> 8;
 
        switch (dev->hdr_type) {                    /* header type */
        case PCI_HEADER_TYPE_NORMAL:                /* standard header */
                if (class == PCI_CLASS_BRIDGE_PCI)
                        goto bad;
                pci_read_irq(dev);
                pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
                pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
                pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
 
                /*
                 *      Do the ugly legacy mode stuff here rather than broken chip
                 *      quirk code. Legacy mode ATA controllers have fixed
                 *      addresses. These are not always echoed in BAR0-3, and
                 *      BAR0-3 in a few cases contain junk!
                 */
                if (class == PCI_CLASS_STORAGE_IDE) {
                        u8 progif;
                        pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
                        if ((progif & 1) == 0) {
                                dev->resource[0].start = 0x1F0;
                                dev->resource[0].end = 0x1F7;
                                dev->resource[0].flags = LEGACY_IO_RESOURCE;
                                dev->resource[1].start = 0x3F6;
                                dev->resource[1].end = 0x3F6;
                                dev->resource[1].flags = LEGACY_IO_RESOURCE;
                        }
                        if ((progif & 4) == 0) {
                                dev->resource[2].start = 0x170;
                                dev->resource[2].end = 0x177;
                                dev->resource[2].flags = LEGACY_IO_RESOURCE;
                                dev->resource[3].start = 0x376;
                                dev->resource[3].end = 0x376;
                                dev->resource[3].flags = LEGACY_IO_RESOURCE;
                        }
                }
                break;
 
        case PCI_HEADER_TYPE_BRIDGE:                /* bridge header */
                if (class != PCI_CLASS_BRIDGE_PCI)
                        goto bad;
                /* The PCI-to-PCI bridge spec requires that subtractive
                   decoding (i.e. transparent) bridge must have programming
                   interface code of 0x01. */
                pci_read_irq(dev);
                dev->transparent = ((dev->class & 0xff) == 1);
                pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
                break;
 
        case PCI_HEADER_TYPE_CARDBUS:               /* CardBus bridge header */
                if (class != PCI_CLASS_BRIDGE_CARDBUS)
                        goto bad;
                pci_read_irq(dev);
                pci_read_bases(dev, 1, 0);
                pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
                pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
                break;
 
        default:                                    /* unknown header */
                printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n",
                        pci_name(dev), dev->hdr_type);
                return -1;
 
        bad:
                printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n",
                       pci_name(dev), class, dev->hdr_type);
                dev->class = PCI_CLASS_NOT_DEFINED;
        }
 
        /* We found a fine healthy device, go go go... */
        return 0;
}
 
/**
 * pci_release_dev - free a pci device structure when all users of it are finished.
 * @dev: device that's been disconnected
 *
 * Will be called only by the device core when all users of this pci device are
 * done.
 */
static void pci_release_dev(struct device *dev)
{
        struct pci_dev *pci_dev;
 
        pci_dev = to_pci_dev(dev);
        kfree(pci_dev);
}
 
static void set_pcie_port_type(struct pci_dev *pdev)
{
        int pos;
        u16 reg16;
 
        pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
        if (!pos)
                return;
        pdev->is_pcie = 1;
        pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
        pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
}
 
/**
 * pci_cfg_space_size - get the configuration space size of the PCI device.
 * @dev: PCI device
 *
 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
 * have 4096 bytes.  Even if the device is capable, that doesn't mean we can
 * access it.  Maybe we don't have a way to generate extended config space
 * accesses, or the device is behind a reverse Express bridge.  So we try
 * reading the dword at 0x100 which must either be 0 or a valid extended
 * capability header.
 */
int pci_cfg_space_size(struct pci_dev *dev)
{
        int pos;
        u32 status;
 
        pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
        if (!pos) {
                pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
                if (!pos)
                        goto fail;
 
                pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
                if (!(status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)))
                        goto fail;
        }
 
        if (pci_read_config_dword(dev, 256, &status) != PCIBIOS_SUCCESSFUL)
                goto fail;
        if (status == 0xffffffff)
                goto fail;
 
        return PCI_CFG_SPACE_EXP_SIZE;
 
 fail:
        return PCI_CFG_SPACE_SIZE;
}
 
static void pci_release_bus_bridge_dev(struct device *dev)
{
        kfree(dev);
}
 
struct pci_dev *alloc_pci_dev(void)
{
        struct pci_dev *dev;
 
        dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
        if (!dev)
                return NULL;
 
        INIT_LIST_HEAD(&dev->global_list);
        INIT_LIST_HEAD(&dev->bus_list);
 
        pci_msi_init_pci_dev(dev);
 
        return dev;
}
EXPORT_SYMBOL(alloc_pci_dev);
 
/*
 * Read the config data for a PCI device, sanity-check it
 * and fill in the dev structure...
 */
static struct pci_dev * __devinit
pci_scan_device(struct pci_bus *bus, int devfn)
{
        struct pci_dev *dev;
        u32 l;
        u8 hdr_type;
        int delay = 1;
 
        if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
                return NULL;
 
        /* some broken boards return 0 or ~0 if a slot is empty: */
        if (l == 0xffffffff || l == 0x00000000 ||
            l == 0x0000ffff || l == 0xffff0000)
                return NULL;
 
        /* Configuration request Retry Status */
        while (l == 0xffff0001) {
                msleep(delay);
                delay *= 2;
                if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
                        return NULL;
                /* Card hasn't responded in 60 seconds?  Must be stuck. */
                if (delay > 60 * 1000) {
                        printk(KERN_WARNING "Device %04x:%02x:%02x.%d not "
                                        "responding\n", pci_domain_nr(bus),
                                        bus->number, PCI_SLOT(devfn),
                                        PCI_FUNC(devfn));
                        return NULL;
                }
        }
 
        if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type))
                return NULL;
 
        dev = alloc_pci_dev();
        if (!dev)
                return NULL;
 
        dev->bus = bus;
        dev->sysdata = bus->sysdata;
        dev->dev.parent = bus->bridge;
        dev->dev.bus = &pci_bus_type;
        dev->devfn = devfn;
        dev->hdr_type = hdr_type & 0x7f;
        dev->multifunction = !!(hdr_type & 0x80);
        dev->vendor = l & 0xffff;
        dev->device = (l >> 16) & 0xffff;
        dev->cfg_size = pci_cfg_space_size(dev);
        dev->error_state = pci_channel_io_normal;
        set_pcie_port_type(dev);
 
        /* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
           set this higher, assuming the system even supports it.  */
        dev->dma_mask = 0xffffffff;
        if (pci_setup_device(dev) < 0) {
                kfree(dev);
                return NULL;
        }
 
        return dev;
}
 
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
{
        device_initialize(&dev->dev);
        dev->dev.release = pci_release_dev;
        pci_dev_get(dev);
 
        set_dev_node(&dev->dev, pcibus_to_node(bus));
        dev->dev.dma_mask = &dev->dma_mask;
        dev->dev.coherent_dma_mask = 0xffffffffull;
 
        /* Fix up broken headers */
        pci_fixup_device(pci_fixup_header, dev);
 
        /*
         * Add the device to our list of discovered devices
         * and the bus list for fixup functions, etc.
         */
        INIT_LIST_HEAD(&dev->global_list);
        down_write(&pci_bus_sem);
        list_add_tail(&dev->bus_list, &bus->devices);
        up_write(&pci_bus_sem);
}
 
struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
{
        struct pci_dev *dev;
 
        dev = pci_scan_device(bus, devfn);
        if (!dev)
                return NULL;
 
        pci_device_add(dev, bus);
 
        return dev;
}
 
/**
 * pci_scan_slot - scan a PCI slot on a bus for devices.
 * @bus: PCI bus to scan
 * @devfn: slot number to scan (must have zero function.)
 *
 * Scan a PCI slot on the specified PCI bus for devices, adding
 * discovered devices to the @bus->devices list.  New devices
 * will have an empty dev->global_list head.
 */
int pci_scan_slot(struct pci_bus *bus, int devfn)
{
        int func, nr = 0;
        int scan_all_fns;
 
        scan_all_fns = pcibios_scan_all_fns(bus, devfn);
 
        for (func = 0; func < 8; func++, devfn++) {
                struct pci_dev *dev;
 
                dev = pci_scan_single_device(bus, devfn);
                if (dev) {
                        nr++;
 
                        /*
                         * If this is a single function device,
                         * don't scan past the first function.
                         */
                        if (!dev->multifunction) {
                                if (func > 0) {
                                        dev->multifunction = 1;
                                } else {
                                        break;
                                }
                        }
                } else {
                        if (func == 0 && !scan_all_fns)
                                break;
                }
        }
        return nr;
}
 
unsigned int pci_scan_child_bus(struct pci_bus *bus)
{
        unsigned int devfn, pass, max = bus->secondary;
        struct pci_dev *dev;
 
        pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
 
        /* Go find them, Rover! */
        for (devfn = 0; devfn < 0x100; devfn += 8)
                pci_scan_slot(bus, devfn);
 
        /*
         * After performing arch-dependent fixup of the bus, look behind
         * all PCI-to-PCI bridges on this bus.
         */
        pr_debug("PCI: Fixups for bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
        pcibios_fixup_bus(bus);
        for (pass=0; pass < 2; pass++)
                list_for_each_entry(dev, &bus->devices, bus_list) {
                        if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
                            dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
                                max = pci_scan_bridge(bus, dev, max, pass);
                }
 
        /*
         * We've scanned the bus and so we know all about what's on
         * the other side of any bridges that may be on this bus plus
         * any devices.
         *
         * Return how far we've got finding sub-buses.
         */
        pr_debug("PCI: Bus scan for %04x:%02x returning with max=%02x\n",
                pci_domain_nr(bus), bus->number, max);
        return max;
}
 
unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
{
        unsigned int max;
 
        max = pci_scan_child_bus(bus);
 
        /*
         * Make the discovered devices available.
         */
        pci_bus_add_devices(bus);
 
        return max;
}
 
struct pci_bus * pci_create_bus(struct device *parent,
                int bus, struct pci_ops *ops, void *sysdata)
{
        int error;
        struct pci_bus *b;
        struct device *dev;
 
        b = pci_alloc_bus();
        if (!b)
                return NULL;
 
        dev = kmalloc(sizeof(*dev), GFP_KERNEL);
        if (!dev){
                kfree(b);
                return NULL;
        }
 
        b->sysdata = sysdata;
        b->ops = ops;
 
        if (pci_find_bus(pci_domain_nr(b), bus)) {
                /* If we already got to this bus through a different bridge, ignore it */
                pr_debug("PCI: Bus %04x:%02x already known\n", pci_domain_nr(b), bus);
                goto err_out;
        }
 
        down_write(&pci_bus_sem);
        list_add_tail(&b->node, &pci_root_buses);
        up_write(&pci_bus_sem);
 
        memset(dev, 0, sizeof(*dev));
        dev->parent = parent;
        dev->release = pci_release_bus_bridge_dev;
        sprintf(dev->bus_id, "pci%04x:%02x", pci_domain_nr(b), bus);
        error = device_register(dev);
        if (error)
                goto dev_reg_err;
        b->bridge = get_device(dev);
 
        b->class_dev.class = &pcibus_class;
        sprintf(b->class_dev.class_id, "%04x:%02x", pci_domain_nr(b), bus);
        error = class_device_register(&b->class_dev);
        if (error)
                goto class_dev_reg_err;
        error = class_device_create_file(&b->class_dev, &class_device_attr_cpuaffinity);
        if (error)
                goto class_dev_create_file_err;
 
        /* Create legacy_io and legacy_mem files for this bus */
        pci_create_legacy_files(b);
 
        error = sysfs_create_link(&b->class_dev.kobj, &b->bridge->kobj, "bridge");
        if (error)
                goto sys_create_link_err;
 
        b->number = b->secondary = bus;
        b->resource[0] = &ioport_resource;
        b->resource[1] = &iomem_resource;
 
        return b;
 
sys_create_link_err:
        class_device_remove_file(&b->class_dev, &class_device_attr_cpuaffinity);
class_dev_create_file_err:
        class_device_unregister(&b->class_dev);
class_dev_reg_err:
        device_unregister(dev);
dev_reg_err:
        down_write(&pci_bus_sem);
        list_del(&b->node);
        up_write(&pci_bus_sem);
err_out:
        kfree(dev);
        kfree(b);
        return NULL;
}
EXPORT_SYMBOL_GPL(pci_create_bus);
 
struct pci_bus *pci_scan_bus_parented(struct device *parent,
                int bus, struct pci_ops *ops, void *sysdata)
{
        struct pci_bus *b;
 
        b = pci_create_bus(parent, bus, ops, sysdata);
        if (b)
                b->subordinate = pci_scan_child_bus(b);
        return b;
}
EXPORT_SYMBOL(pci_scan_bus_parented);
 
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pci_add_new_bus);
EXPORT_SYMBOL(pci_do_scan_bus);
EXPORT_SYMBOL(pci_scan_slot);
EXPORT_SYMBOL(pci_scan_bridge);
EXPORT_SYMBOL(pci_scan_single_device);
EXPORT_SYMBOL_GPL(pci_scan_child_bus);
#endif
 
static int __init pci_sort_bf_cmp(const struct pci_dev *a, const struct pci_dev *b)
{
        if      (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
        else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return  1;
 
        if      (a->bus->number < b->bus->number) return -1;
        else if (a->bus->number > b->bus->number) return  1;
 
        if      (a->devfn < b->devfn) return -1;
        else if (a->devfn > b->devfn) return  1;
 
        return 0;
}
 
/*
 * Yes, this forcably breaks the klist abstraction temporarily.  It
 * just wants to sort the klist, not change reference counts and
 * take/drop locks rapidly in the process.  It does all this while
 * holding the lock for the list, so objects can't otherwise be
 * added/removed while we're swizzling.
 */
static void __init pci_insertion_sort_klist(struct pci_dev *a, struct list_head *list)
{
        struct list_head *pos;
        struct klist_node *n;
        struct device *dev;
        struct pci_dev *b;
 
        list_for_each(pos, list) {
                n = container_of(pos, struct klist_node, n_node);
                dev = container_of(n, struct device, knode_bus);
                b = to_pci_dev(dev);
                if (pci_sort_bf_cmp(a, b) <= 0) {
                        list_move_tail(&a->dev.knode_bus.n_node, &b->dev.knode_bus.n_node);
                        return;
                }
        }
        list_move_tail(&a->dev.knode_bus.n_node, list);
}
 
static void __init pci_sort_breadthfirst_klist(void)
{
        LIST_HEAD(sorted_devices);
        struct list_head *pos, *tmp;
        struct klist_node *n;
        struct device *dev;
        struct pci_dev *pdev;
 
        spin_lock(&pci_bus_type.klist_devices.k_lock);
        list_for_each_safe(pos, tmp, &pci_bus_type.klist_devices.k_list) {
                n = container_of(pos, struct klist_node, n_node);
                dev = container_of(n, struct device, knode_bus);
                pdev = to_pci_dev(dev);
                pci_insertion_sort_klist(pdev, &sorted_devices);
        }
        list_splice(&sorted_devices, &pci_bus_type.klist_devices.k_list);
        spin_unlock(&pci_bus_type.klist_devices.k_lock);
}
 
static void __init pci_insertion_sort_devices(struct pci_dev *a, struct list_head *list)
{
        struct pci_dev *b;
 
        list_for_each_entry(b, list, global_list) {
                if (pci_sort_bf_cmp(a, b) <= 0) {
                        list_move_tail(&a->global_list, &b->global_list);
                        return;
                }
        }
        list_move_tail(&a->global_list, list);
}
 
static void __init pci_sort_breadthfirst_devices(void)
{
        LIST_HEAD(sorted_devices);
        struct pci_dev *dev, *tmp;
 
        down_write(&pci_bus_sem);
        list_for_each_entry_safe(dev, tmp, &pci_devices, global_list) {
                pci_insertion_sort_devices(dev, &sorted_devices);
        }
        list_splice(&sorted_devices, &pci_devices);
        up_write(&pci_bus_sem);
}
 
void __init pci_sort_breadthfirst(void)
{
        pci_sort_breadthfirst_devices();
        pci_sort_breadthfirst_klist();
}
 
Browse

Tools

Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [drivers/] [pci/] [probe.c] - Blame information for rev 65

Line No.	Rev	Author	Line
1	62	marcus.erl	`/*`
2			`* probe.c - PCI detection and setup code`
3			`*/`
4
5			`#include <linux/kernel.h>`
6			`#include <linux/delay.h>`
7			`#include <linux/init.h>`
8			`#include <linux/pci.h>`
9			`#include <linux/slab.h>`
10			`#include <linux/module.h>`
11			`#include <linux/cpumask.h>`
12			`#include "pci.h"`
13
14			`#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */`
15			`#define CARDBUS_RESERVE_BUSNR 3`
16			`#define PCI_CFG_SPACE_SIZE 256`
17			`#define PCI_CFG_SPACE_EXP_SIZE 4096`
18
19			`/* Ugh. Need to stop exporting this to modules. */`
20			`LIST_HEAD(pci_root_buses);`
21			`EXPORT_SYMBOL(pci_root_buses);`
22
23			`LIST_HEAD(pci_devices);`
24
25			`/*`
26			`* Some device drivers need know if pci is initiated.`
27			`* Basically, we think pci is not initiated when there`
28			`* is no device in list of pci_devices.`
29			`*/`
30			`int no_pci_devices(void)`
31			`{`
32			`return list_empty(&pci_devices);`
33			`}`
34
35			`EXPORT_SYMBOL(no_pci_devices);`
36
37			`#ifdef HAVE_PCI_LEGACY`
38			`/**`
39			`* pci_create_legacy_files - create legacy I/O port and memory files`
40			`* @b: bus to create files under`