URL https://opencores.org/ocsvn/test_project/test_project/trunk
Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [drivers/] [ssb/] [main.c] - Blame information for rev 78

Go to most recent revision | Details | Compare with Previous | View Log

/*
 * Sonics Silicon Backplane
 * Subsystem core
 *
 * Copyright 2005, Broadcom Corporation
 * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
 *
 * Licensed under the GNU/GPL. See COPYING for details.
 */
 
#include "ssb_private.h"
 
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
 
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
 
 
MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
MODULE_LICENSE("GPL");
 
 
/* Temporary list of yet-to-be-attached buses */
static LIST_HEAD(attach_queue);
/* List if running buses */
static LIST_HEAD(buses);
/* Software ID counter */
static unsigned int next_busnumber;
/* buses_mutes locks the two buslists and the next_busnumber.
 * Don't lock this directly, but use ssb_buses_[un]lock() below. */
static DEFINE_MUTEX(buses_mutex);
 
/* There are differences in the codeflow, if the bus is
 * initialized from early boot, as various needed services
 * are not available early. This is a mechanism to delay
 * these initializations to after early boot has finished.
 * It's also used to avoid mutex locking, as that's not
 * available and needed early. */
static bool ssb_is_early_boot = 1;
 
static void ssb_buses_lock(void);
static void ssb_buses_unlock(void);
 
 
#ifdef CONFIG_SSB_PCIHOST
struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
{
        struct ssb_bus *bus;
 
        ssb_buses_lock();
        list_for_each_entry(bus, &buses, list) {
                if (bus->bustype == SSB_BUSTYPE_PCI &&
                    bus->host_pci == pdev)
                        goto found;
        }
        bus = NULL;
found:
        ssb_buses_unlock();
 
        return bus;
}
#endif /* CONFIG_SSB_PCIHOST */
 
static struct ssb_device *ssb_device_get(struct ssb_device *dev)
{
        if (dev)
                get_device(dev->dev);
        return dev;
}
 
static void ssb_device_put(struct ssb_device *dev)
{
        if (dev)
                put_device(dev->dev);
}
 
static int ssb_bus_resume(struct ssb_bus *bus)
{
        int err;
 
        ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
        err = ssb_pcmcia_init(bus);
        if (err) {
                /* No need to disable XTAL, as we don't have one on PCMCIA. */
                return err;
        }
        ssb_chipco_resume(&bus->chipco);
 
        return 0;
}
 
static int ssb_device_resume(struct device *dev)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv;
        struct ssb_bus *bus;
        int err = 0;
 
        bus = ssb_dev->bus;
        if (bus->suspend_cnt == bus->nr_devices) {
                err = ssb_bus_resume(bus);
                if (err)
                        return err;
        }
        bus->suspend_cnt--;
        if (dev->driver) {
                ssb_drv = drv_to_ssb_drv(dev->driver);
                if (ssb_drv && ssb_drv->resume)
                        err = ssb_drv->resume(ssb_dev);
                if (err)
                        goto out;
        }
out:
        return err;
}
 
static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state)
{
        ssb_chipco_suspend(&bus->chipco, state);
        ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 
        /* Reset HW state information in memory, so that HW is
         * completely reinitialized on resume. */
        bus->mapped_device = NULL;
#ifdef CONFIG_SSB_DRIVER_PCICORE
        bus->pcicore.setup_done = 0;
#endif
#ifdef CONFIG_SSB_DEBUG
        bus->powered_up = 0;
#endif
}
 
static int ssb_device_suspend(struct device *dev, pm_message_t state)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv;
        struct ssb_bus *bus;
        int err = 0;
 
        if (dev->driver) {
                ssb_drv = drv_to_ssb_drv(dev->driver);
                if (ssb_drv && ssb_drv->suspend)
                        err = ssb_drv->suspend(ssb_dev, state);
                if (err)
                        goto out;
        }
 
        bus = ssb_dev->bus;
        bus->suspend_cnt++;
        if (bus->suspend_cnt == bus->nr_devices) {
                /* All devices suspended. Shutdown the bus. */
                ssb_bus_suspend(bus, state);
        }
 
out:
        return err;
}
 
#ifdef CONFIG_SSB_PCIHOST
int ssb_devices_freeze(struct ssb_bus *bus)
{
        struct ssb_device *dev;
        struct ssb_driver *drv;
        int err = 0;
        int i;
        pm_message_t state = PMSG_FREEZE;
 
        /* First check that we are capable to freeze all devices. */
        for (i = 0; i < bus->nr_devices; i++) {
                dev = &(bus->devices[i]);
                if (!dev->dev ||
                    !dev->dev->driver ||
                    !device_is_registered(dev->dev))
                        continue;
                drv = drv_to_ssb_drv(dev->dev->driver);
                if (!drv)
                        continue;
                if (!drv->suspend) {
                        /* Nope, can't suspend this one. */
                        return -EOPNOTSUPP;
                }
        }
        /* Now suspend all devices */
        for (i = 0; i < bus->nr_devices; i++) {
                dev = &(bus->devices[i]);
                if (!dev->dev ||
                    !dev->dev->driver ||
                    !device_is_registered(dev->dev))
                        continue;
                drv = drv_to_ssb_drv(dev->dev->driver);
                if (!drv)
                        continue;
                err = drv->suspend(dev, state);
                if (err) {
                        ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
                                   dev->dev->bus_id);
                        goto err_unwind;
                }
        }
 
        return 0;
err_unwind:
        for (i--; i >= 0; i--) {
                dev = &(bus->devices[i]);
                if (!dev->dev ||
                    !dev->dev->driver ||
                    !device_is_registered(dev->dev))
                        continue;
                drv = drv_to_ssb_drv(dev->dev->driver);
                if (!drv)
                        continue;
                if (drv->resume)
                        drv->resume(dev);
        }
        return err;
}
 
int ssb_devices_thaw(struct ssb_bus *bus)
{
        struct ssb_device *dev;
        struct ssb_driver *drv;
        int err;
        int i;
 
        for (i = 0; i < bus->nr_devices; i++) {
                dev = &(bus->devices[i]);
                if (!dev->dev ||
                    !dev->dev->driver ||
                    !device_is_registered(dev->dev))
                        continue;
                drv = drv_to_ssb_drv(dev->dev->driver);
                if (!drv)
                        continue;
                if (SSB_WARN_ON(!drv->resume))
                        continue;
                err = drv->resume(dev);
                if (err) {
                        ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
                                   dev->dev->bus_id);
                }
        }
 
        return 0;
}
#endif /* CONFIG_SSB_PCIHOST */
 
static void ssb_device_shutdown(struct device *dev)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv;
 
        if (!dev->driver)
                return;
        ssb_drv = drv_to_ssb_drv(dev->driver);
        if (ssb_drv && ssb_drv->shutdown)
                ssb_drv->shutdown(ssb_dev);
}
 
static int ssb_device_remove(struct device *dev)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 
        if (ssb_drv && ssb_drv->remove)
                ssb_drv->remove(ssb_dev);
        ssb_device_put(ssb_dev);
 
        return 0;
}
 
static int ssb_device_probe(struct device *dev)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
        int err = 0;
 
        ssb_device_get(ssb_dev);
        if (ssb_drv && ssb_drv->probe)
                err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
        if (err)
                ssb_device_put(ssb_dev);
 
        return err;
}
 
static int ssb_match_devid(const struct ssb_device_id *tabid,
                           const struct ssb_device_id *devid)
{
        if ((tabid->vendor != devid->vendor) &&
            tabid->vendor != SSB_ANY_VENDOR)
                return 0;
        if ((tabid->coreid != devid->coreid) &&
            tabid->coreid != SSB_ANY_ID)
                return 0;
        if ((tabid->revision != devid->revision) &&
            tabid->revision != SSB_ANY_REV)
                return 0;
        return 1;
}
 
static int ssb_bus_match(struct device *dev, struct device_driver *drv)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
        const struct ssb_device_id *id;
 
        for (id = ssb_drv->id_table;
             id->vendor || id->coreid || id->revision;
             id++) {
                if (ssb_match_devid(id, &ssb_dev->id))
                        return 1; /* found */
        }
 
        return 0;
}
 
static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 
        if (!dev)
                return -ENODEV;
 
        return add_uevent_var(env,
                             "MODALIAS=ssb:v%04Xid%04Xrev%02X",
                             ssb_dev->id.vendor, ssb_dev->id.coreid,
                             ssb_dev->id.revision);
}
 
static struct bus_type ssb_bustype = {
        .name           = "ssb",
        .match          = ssb_bus_match,
        .probe          = ssb_device_probe,
        .remove         = ssb_device_remove,
        .shutdown       = ssb_device_shutdown,
        .suspend        = ssb_device_suspend,
        .resume         = ssb_device_resume,
        .uevent         = ssb_device_uevent,
};
 
static void ssb_buses_lock(void)
{
        /* See the comment at the ssb_is_early_boot definition */
        if (!ssb_is_early_boot)
                mutex_lock(&buses_mutex);
}
 
static void ssb_buses_unlock(void)
{
        /* See the comment at the ssb_is_early_boot definition */
        if (!ssb_is_early_boot)
                mutex_unlock(&buses_mutex);
}
 
static void ssb_devices_unregister(struct ssb_bus *bus)
{
        struct ssb_device *sdev;
        int i;
 
        for (i = bus->nr_devices - 1; i >= 0; i--) {
                sdev = &(bus->devices[i]);
                if (sdev->dev)
                        device_unregister(sdev->dev);
        }
}
 
void ssb_bus_unregister(struct ssb_bus *bus)
{
        ssb_buses_lock();
        ssb_devices_unregister(bus);
        list_del(&bus->list);
        ssb_buses_unlock();
 
        /* ssb_pcmcia_exit(bus); */
        ssb_pci_exit(bus);
        ssb_iounmap(bus);
}
EXPORT_SYMBOL(ssb_bus_unregister);
 
static void ssb_release_dev(struct device *dev)
{
        struct __ssb_dev_wrapper *devwrap;
 
        devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
        kfree(devwrap);
}
 
static int ssb_devices_register(struct ssb_bus *bus)
{
        struct ssb_device *sdev;
        struct device *dev;
        struct __ssb_dev_wrapper *devwrap;
        int i, err = 0;
        int dev_idx = 0;
 
        for (i = 0; i < bus->nr_devices; i++) {
                sdev = &(bus->devices[i]);
 
                /* We don't register SSB-system devices to the kernel,
                 * as the drivers for them are built into SSB. */
                switch (sdev->id.coreid) {
                case SSB_DEV_CHIPCOMMON:
                case SSB_DEV_PCI:
                case SSB_DEV_PCIE:
                case SSB_DEV_PCMCIA:
                case SSB_DEV_MIPS:
                case SSB_DEV_MIPS_3302:
                case SSB_DEV_EXTIF:
                        continue;
                }
 
                devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
                if (!devwrap) {
                        ssb_printk(KERN_ERR PFX
                                   "Could not allocate device\n");
                        err = -ENOMEM;
                        goto error;
                }
                dev = &devwrap->dev;
                devwrap->sdev = sdev;
 
                dev->release = ssb_release_dev;
                dev->bus = &ssb_bustype;
                snprintf(dev->bus_id, sizeof(dev->bus_id),
                         "ssb%u:%d", bus->busnumber, dev_idx);
 
                switch (bus->bustype) {
                case SSB_BUSTYPE_PCI:
#ifdef CONFIG_SSB_PCIHOST
                        sdev->irq = bus->host_pci->irq;
                        dev->parent = &bus->host_pci->dev;
#endif
                        break;
                case SSB_BUSTYPE_PCMCIA:
#ifdef CONFIG_SSB_PCMCIAHOST
                        sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
                        dev->parent = &bus->host_pcmcia->dev;
#endif
                        break;
                case SSB_BUSTYPE_SSB:
                        break;
                }
 
                sdev->dev = dev;
                err = device_register(dev);
                if (err) {
                        ssb_printk(KERN_ERR PFX
                                   "Could not register %s\n",
                                   dev->bus_id);
                        /* Set dev to NULL to not unregister
                         * dev on error unwinding. */
                        sdev->dev = NULL;
                        kfree(devwrap);
                        goto error;
                }
                dev_idx++;
        }
 
        return 0;
error:
        /* Unwind the already registered devices. */
        ssb_devices_unregister(bus);
        return err;
}
 
/* Needs ssb_buses_lock() */
static int ssb_attach_queued_buses(void)
{
        struct ssb_bus *bus, *n;
        int err = 0;
        int drop_them_all = 0;
 
        list_for_each_entry_safe(bus, n, &attach_queue, list) {
                if (drop_them_all) {
                        list_del(&bus->list);
                        continue;
                }
                /* Can't init the PCIcore in ssb_bus_register(), as that
                 * is too early in boot for embedded systems
                 * (no udelay() available). So do it here in attach stage.
                 */
                err = ssb_bus_powerup(bus, 0);
                if (err)
                        goto error;
                ssb_pcicore_init(&bus->pcicore);
                ssb_bus_may_powerdown(bus);
 
                err = ssb_devices_register(bus);
error:
                if (err) {
                        drop_them_all = 1;
                        list_del(&bus->list);
                        continue;
                }
                list_move_tail(&bus->list, &buses);
        }
 
        return err;
}
 
static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
{
        struct ssb_bus *bus = dev->bus;
 
        offset += dev->core_index * SSB_CORE_SIZE;
        return readw(bus->mmio + offset);
}
 
static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
{
        struct ssb_bus *bus = dev->bus;
 
        offset += dev->core_index * SSB_CORE_SIZE;
        return readl(bus->mmio + offset);
}
 
static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
{
        struct ssb_bus *bus = dev->bus;
 
        offset += dev->core_index * SSB_CORE_SIZE;
        writew(value, bus->mmio + offset);
}
 
static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
{
        struct ssb_bus *bus = dev->bus;
 
        offset += dev->core_index * SSB_CORE_SIZE;
        writel(value, bus->mmio + offset);
}
 
/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
static const struct ssb_bus_ops ssb_ssb_ops = {
        .read16         = ssb_ssb_read16,
        .read32         = ssb_ssb_read32,
        .write16        = ssb_ssb_write16,
        .write32        = ssb_ssb_write32,
};
 
static int ssb_fetch_invariants(struct ssb_bus *bus,
                                ssb_invariants_func_t get_invariants)
{
        struct ssb_init_invariants iv;
        int err;
 
        memset(&iv, 0, sizeof(iv));
        err = get_invariants(bus, &iv);
        if (err)
                goto out;
        memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
        memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
out:
        return err;
}
 
static int ssb_bus_register(struct ssb_bus *bus,
                            ssb_invariants_func_t get_invariants,
                            unsigned long baseaddr)
{
        int err;
 
        spin_lock_init(&bus->bar_lock);
        INIT_LIST_HEAD(&bus->list);
 
        /* Powerup the bus */
        err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
        if (err)
                goto out;
        ssb_buses_lock();
        bus->busnumber = next_busnumber;
        /* Scan for devices (cores) */
        err = ssb_bus_scan(bus, baseaddr);
        if (err)
                goto err_disable_xtal;
 
        /* Init PCI-host device (if any) */
        err = ssb_pci_init(bus);
        if (err)
                goto err_unmap;
        /* Init PCMCIA-host device (if any) */
        err = ssb_pcmcia_init(bus);
        if (err)
                goto err_pci_exit;
 
        /* Initialize basic system devices (if available) */
        err = ssb_bus_powerup(bus, 0);
        if (err)
                goto err_pcmcia_exit;
        ssb_chipcommon_init(&bus->chipco);
        ssb_mipscore_init(&bus->mipscore);
        err = ssb_fetch_invariants(bus, get_invariants);
        if (err) {
                ssb_bus_may_powerdown(bus);
                goto err_pcmcia_exit;
        }
        ssb_bus_may_powerdown(bus);
 
        /* Queue it for attach.
         * See the comment at the ssb_is_early_boot definition. */
        list_add_tail(&bus->list, &attach_queue);
        if (!ssb_is_early_boot) {
                /* This is not early boot, so we must attach the bus now */
                err = ssb_attach_queued_buses();
                if (err)
                        goto err_dequeue;
        }
        next_busnumber++;
        ssb_buses_unlock();
 
out:
        return err;
 
err_dequeue:
        list_del(&bus->list);
err_pcmcia_exit:
/*      ssb_pcmcia_exit(bus); */
err_pci_exit:
        ssb_pci_exit(bus);
err_unmap:
        ssb_iounmap(bus);
err_disable_xtal:
        ssb_buses_unlock();
        ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
        return err;
}
 
#ifdef CONFIG_SSB_PCIHOST
int ssb_bus_pcibus_register(struct ssb_bus *bus,
                            struct pci_dev *host_pci)
{
        int err;
 
        bus->bustype = SSB_BUSTYPE_PCI;
        bus->host_pci = host_pci;
        bus->ops = &ssb_pci_ops;
 
        err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
        if (!err) {
                ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
                           "PCI device %s\n", host_pci->dev.bus_id);
        }
 
        return err;
}
EXPORT_SYMBOL(ssb_bus_pcibus_register);
#endif /* CONFIG_SSB_PCIHOST */
 
#ifdef CONFIG_SSB_PCMCIAHOST
int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
                               struct pcmcia_device *pcmcia_dev,
                               unsigned long baseaddr)
{
        int err;
 
        bus->bustype = SSB_BUSTYPE_PCMCIA;
        bus->host_pcmcia = pcmcia_dev;
        bus->ops = &ssb_pcmcia_ops;
 
        err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
        if (!err) {
                ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
                           "PCMCIA device %s\n", pcmcia_dev->devname);
        }
 
        return err;
}
EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
#endif /* CONFIG_SSB_PCMCIAHOST */
 
int ssb_bus_ssbbus_register(struct ssb_bus *bus,
                            unsigned long baseaddr,
                            ssb_invariants_func_t get_invariants)
{
        int err;
 
        bus->bustype = SSB_BUSTYPE_SSB;
        bus->ops = &ssb_ssb_ops;
 
        err = ssb_bus_register(bus, get_invariants, baseaddr);
        if (!err) {
                ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
                           "address 0x%08lX\n", baseaddr);
        }
 
        return err;
}
 
int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
{
        drv->drv.name = drv->name;
        drv->drv.bus = &ssb_bustype;
        drv->drv.owner = owner;
 
        return driver_register(&drv->drv);
}
EXPORT_SYMBOL(__ssb_driver_register);
 
void ssb_driver_unregister(struct ssb_driver *drv)
{
        driver_unregister(&drv->drv);
}
EXPORT_SYMBOL(ssb_driver_unregister);
 
void ssb_set_devtypedata(struct ssb_device *dev, void *data)
{
        struct ssb_bus *bus = dev->bus;
        struct ssb_device *ent;
        int i;
 
        for (i = 0; i < bus->nr_devices; i++) {
                ent = &(bus->devices[i]);
                if (ent->id.vendor != dev->id.vendor)
                        continue;
                if (ent->id.coreid != dev->id.coreid)
                        continue;
 
                ent->devtypedata = data;
        }
}
EXPORT_SYMBOL(ssb_set_devtypedata);
 
static u32 clkfactor_f6_resolve(u32 v)
{
        /* map the magic values */
        switch (v) {
        case SSB_CHIPCO_CLK_F6_2:
                return 2;
        case SSB_CHIPCO_CLK_F6_3:
                return 3;
        case SSB_CHIPCO_CLK_F6_4:
                return 4;
        case SSB_CHIPCO_CLK_F6_5:
                return 5;
        case SSB_CHIPCO_CLK_F6_6:
                return 6;
        case SSB_CHIPCO_CLK_F6_7:
                return 7;
        }
        return 0;
}
 
/* Calculate the speed the backplane would run at a given set of clockcontrol values */
u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
{
        u32 n1, n2, clock, m1, m2, m3, mc;
 
        n1 = (n & SSB_CHIPCO_CLK_N1);
        n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
 
        switch (plltype) {
        case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
                if (m & SSB_CHIPCO_CLK_T6_MMASK)
                        return SSB_CHIPCO_CLK_T6_M0;
                return SSB_CHIPCO_CLK_T6_M1;
        case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
        case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
        case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
        case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
                n1 = clkfactor_f6_resolve(n1);
                n2 += SSB_CHIPCO_CLK_F5_BIAS;
                break;
        case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
                n1 += SSB_CHIPCO_CLK_T2_BIAS;
                n2 += SSB_CHIPCO_CLK_T2_BIAS;
                SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
                SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
                break;
        case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
                return 100000000;
        default:
                SSB_WARN_ON(1);
        }
 
        switch (plltype) {
        case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
        case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
                clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
                break;
        default:
                clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
        }
        if (!clock)
                return 0;
 
        m1 = (m & SSB_CHIPCO_CLK_M1);
        m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
        m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
        mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
 
        switch (plltype) {
        case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
        case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
        case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
        case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
                m1 = clkfactor_f6_resolve(m1);
                if ((plltype == SSB_PLLTYPE_1) ||
                    (plltype == SSB_PLLTYPE_3))
                        m2 += SSB_CHIPCO_CLK_F5_BIAS;
                else
                        m2 = clkfactor_f6_resolve(m2);
                m3 = clkfactor_f6_resolve(m3);
 
                switch (mc) {
                case SSB_CHIPCO_CLK_MC_BYPASS:
                        return clock;
                case SSB_CHIPCO_CLK_MC_M1:
                        return (clock / m1);
                case SSB_CHIPCO_CLK_MC_M1M2:
                        return (clock / (m1 * m2));
                case SSB_CHIPCO_CLK_MC_M1M2M3:
                        return (clock / (m1 * m2 * m3));
                case SSB_CHIPCO_CLK_MC_M1M3:
                        return (clock / (m1 * m3));
                }
                return 0;
        case SSB_PLLTYPE_2:
                m1 += SSB_CHIPCO_CLK_T2_BIAS;
                m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
                m3 += SSB_CHIPCO_CLK_T2_BIAS;
                SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
                SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
                SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
 
                if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
                        clock /= m1;
                if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
                        clock /= m2;
                if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
                        clock /= m3;
                return clock;
        default:
                SSB_WARN_ON(1);
        }
        return 0;
}
 
/* Get the current speed the backplane is running at */
u32 ssb_clockspeed(struct ssb_bus *bus)
{
        u32 rate;
        u32 plltype;
        u32 clkctl_n, clkctl_m;
 
        if (ssb_extif_available(&bus->extif))
                ssb_extif_get_clockcontrol(&bus->extif, &plltype,
                                           &clkctl_n, &clkctl_m);
        else if (bus->chipco.dev)
                ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
                                            &clkctl_n, &clkctl_m);
        else
                return 0;
 
        if (bus->chip_id == 0x5365) {
                rate = 100000000;
        } else {
                rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
                if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
                        rate /= 2;
        }
 
        return rate;
}
EXPORT_SYMBOL(ssb_clockspeed);
 
static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
{
        /* The REJECT bit changed position in TMSLOW between
         * Backplane revisions. */
        switch (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV) {
        case SSB_IDLOW_SSBREV_22:
                return SSB_TMSLOW_REJECT_22;
        case SSB_IDLOW_SSBREV_23:
                return SSB_TMSLOW_REJECT_23;
        default:
                WARN_ON(1);
        }
        return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
}
 
int ssb_device_is_enabled(struct ssb_device *dev)
{
        u32 val;
        u32 reject;
 
        reject = ssb_tmslow_reject_bitmask(dev);
        val = ssb_read32(dev, SSB_TMSLOW);
        val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
 
        return (val == SSB_TMSLOW_CLOCK);
}
EXPORT_SYMBOL(ssb_device_is_enabled);
 
static void ssb_flush_tmslow(struct ssb_device *dev)
{
        /* Make _really_ sure the device has finished the TMSLOW
         * register write transaction, as we risk running into
         * a machine check exception otherwise.
         * Do this by reading the register back to commit the
         * PCI write and delay an additional usec for the device
         * to react to the change. */
        ssb_read32(dev, SSB_TMSLOW);
        udelay(1);
}
 
void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
{
        u32 val;
 
        ssb_device_disable(dev, core_specific_flags);
        ssb_write32(dev, SSB_TMSLOW,
                    SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
                    SSB_TMSLOW_FGC | core_specific_flags);
        ssb_flush_tmslow(dev);
 
        /* Clear SERR if set. This is a hw bug workaround. */
        if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
                ssb_write32(dev, SSB_TMSHIGH, 0);
 
        val = ssb_read32(dev, SSB_IMSTATE);
        if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
                val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
                ssb_write32(dev, SSB_IMSTATE, val);
        }
 
        ssb_write32(dev, SSB_TMSLOW,
                    SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
                    core_specific_flags);
        ssb_flush_tmslow(dev);
 
        ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
                    core_specific_flags);
        ssb_flush_tmslow(dev);
}
EXPORT_SYMBOL(ssb_device_enable);
 
/* Wait for a bit in a register to get set or unset.
 * timeout is in units of ten-microseconds */
static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
                        int timeout, int set)
{
        int i;
        u32 val;
 
        for (i = 0; i < timeout; i++) {
                val = ssb_read32(dev, reg);
                if (set) {
                        if (val & bitmask)
                                return 0;
                } else {
                        if (!(val & bitmask))
                                return 0;
                }
                udelay(10);
        }
        printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
                            "register %04X to %s.\n",
               bitmask, reg, (set ? "set" : "clear"));
 
        return -ETIMEDOUT;
}
 
void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
{
        u32 reject;
 
        if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
                return;
 
        reject = ssb_tmslow_reject_bitmask(dev);
        ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
        ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
        ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
        ssb_write32(dev, SSB_TMSLOW,
                    SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
                    reject | SSB_TMSLOW_RESET |
                    core_specific_flags);
        ssb_flush_tmslow(dev);
 
        ssb_write32(dev, SSB_TMSLOW,
                    reject | SSB_TMSLOW_RESET |
                    core_specific_flags);
        ssb_flush_tmslow(dev);
}
EXPORT_SYMBOL(ssb_device_disable);
 
u32 ssb_dma_translation(struct ssb_device *dev)
{
        switch (dev->bus->bustype) {
        case SSB_BUSTYPE_SSB:
                return 0;
        case SSB_BUSTYPE_PCI:
        case SSB_BUSTYPE_PCMCIA:
                return SSB_PCI_DMA;
        }
        return 0;
}
EXPORT_SYMBOL(ssb_dma_translation);
 
int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
{
        struct device *dev = ssb_dev->dev;
 
#ifdef CONFIG_SSB_PCIHOST
        if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI &&
            !dma_supported(dev, mask))
                return -EIO;
#endif
        dev->coherent_dma_mask = mask;
        dev->dma_mask = &dev->coherent_dma_mask;
 
        return 0;
}
EXPORT_SYMBOL(ssb_dma_set_mask);
 
int ssb_bus_may_powerdown(struct ssb_bus *bus)
{
        struct ssb_chipcommon *cc;
        int err = 0;
 
        /* On buses where more than one core may be working
         * at a time, we must not powerdown stuff if there are
         * still cores that may want to run. */
        if (bus->bustype == SSB_BUSTYPE_SSB)
                goto out;
 
        cc = &bus->chipco;
        ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
        err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
        if (err)
                goto error;
out:
#ifdef CONFIG_SSB_DEBUG
        bus->powered_up = 0;
#endif
        return err;
error:
        ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
        goto out;
}
EXPORT_SYMBOL(ssb_bus_may_powerdown);
 
int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
{
        struct ssb_chipcommon *cc;
        int err;
        enum ssb_clkmode mode;
 
        err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
        if (err)
                goto error;
        cc = &bus->chipco;
        mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
        ssb_chipco_set_clockmode(cc, mode);
 
#ifdef CONFIG_SSB_DEBUG
        bus->powered_up = 1;
#endif
        return 0;
error:
        ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
        return err;
}
EXPORT_SYMBOL(ssb_bus_powerup);
 
u32 ssb_admatch_base(u32 adm)
{
        u32 base = 0;
 
        switch (adm & SSB_ADM_TYPE) {
        case SSB_ADM_TYPE0:
                base = (adm & SSB_ADM_BASE0);
                break;
        case SSB_ADM_TYPE1:
                SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
                base = (adm & SSB_ADM_BASE1);
                break;
        case SSB_ADM_TYPE2:
                SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
                base = (adm & SSB_ADM_BASE2);
                break;
        default:
                SSB_WARN_ON(1);
        }
 
        return base;
}
EXPORT_SYMBOL(ssb_admatch_base);
 
u32 ssb_admatch_size(u32 adm)
{
        u32 size = 0;
 
        switch (adm & SSB_ADM_TYPE) {
        case SSB_ADM_TYPE0:
                size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
                break;
        case SSB_ADM_TYPE1:
                SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
                size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
                break;
        case SSB_ADM_TYPE2:
                SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
                size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
                break;
        default:
                SSB_WARN_ON(1);
        }
        size = (1 << (size + 1));
 
        return size;
}
EXPORT_SYMBOL(ssb_admatch_size);
 
static int __init ssb_modinit(void)
{
        int err;
 
        /* See the comment at the ssb_is_early_boot definition */
        ssb_is_early_boot = 0;
        err = bus_register(&ssb_bustype);
        if (err)
                return err;
 
        /* Maybe we already registered some buses at early boot.
         * Check for this and attach them
         */
        ssb_buses_lock();
        err = ssb_attach_queued_buses();
        ssb_buses_unlock();
        if (err)
                bus_unregister(&ssb_bustype);
 
        err = b43_pci_ssb_bridge_init();
        if (err) {
                ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
                           "initialization failed");
                /* don't fail SSB init because of this */
                err = 0;
        }
 
        return err;
}
/* ssb must be initialized after PCI but before the ssb drivers.
 * That means we must use some initcall between subsys_initcall
 * and device_initcall. */
fs_initcall(ssb_modinit);
 
static void __exit ssb_modexit(void)
{
        b43_pci_ssb_bridge_exit();
        bus_unregister(&ssb_bustype);
}
module_exit(ssb_modexit)
Browse

Tools

Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [drivers/] [ssb/] [main.c] - Blame information for rev 78

Line No.	Rev	Author	Line
1	62	marcus.erl	`/*`
2			`* Sonics Silicon Backplane`
3			`* Subsystem core`
4			`*`
5			`* Copyright 2005, Broadcom Corporation`
6			`* Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>`
7			`*`
8			`* Licensed under the GNU/GPL. See COPYING for details.`
9			`*/`
10
11			`#include "ssb_private.h"`
12
13			`#include <linux/delay.h>`
14			`#include <linux/io.h>`
15			`#include <linux/ssb/ssb.h>`
16			`#include <linux/ssb/ssb_regs.h>`
17			`#include <linux/dma-mapping.h>`
18			`#include <linux/pci.h>`
19
20			`#include <pcmcia/cs_types.h>`
21			`#include <pcmcia/cs.h>`
22			`#include <pcmcia/cistpl.h>`
23			`#include <pcmcia/ds.h>`
24
25
26			`MODULE_DESCRIPTION("Sonics Silicon Backplane driver");`
27			`MODULE_LICENSE("GPL");`
28
29
30			`/* Temporary list of yet-to-be-attached buses */`
31			`static LIST_HEAD(attach_queue);`
32			`/* List if running buses */`
33			`static LIST_HEAD(buses);`
34			`/* Software ID counter */`
35			`static unsigned int next_busnumber;`
36			`/* buses_mutes locks the two buslists and the next_busnumber.`
37			`* Don't lock this directly, but use ssb_buses_[un]lock() below. */`
38			`static DEFINE_MUTEX(buses_mutex);`
39
40			`/* There are differences in the codeflow, if the bus is`