OpenCores
URL https://opencores.org/ocsvn/test_project/test_project/trunk

Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [include/] [linux/] [i2c-gpio.h] - Blame information for rev 62

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 62 marcus.erl
/*
2
 * i2c-gpio interface to platform code
3
 *
4
 * Copyright (C) 2007 Atmel Corporation
5
 *
6
 * This program is free software; you can redistribute it and/or modify
7
 * it under the terms of the GNU General Public License version 2 as
8
 * published by the Free Software Foundation.
9
 */
10
#ifndef _LINUX_I2C_GPIO_H
11
#define _LINUX_I2C_GPIO_H
12
 
13
/**
14
 * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
15
 * @sda_pin: GPIO pin ID to use for SDA
16
 * @scl_pin: GPIO pin ID to use for SCL
17
 * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
18
 * @timeout: clock stretching timeout in jiffies. If the slave keeps
19
 *      SCL low for longer than this, the transfer will time out.
20
 * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
21
 *      isn't actively driven high when setting the output value high.
22
 *      gpio_get_value() must return the actual pin state even if the
23
 *      pin is configured as an output.
24
 * @scl_is_open_drain: SCL is set up as open drain. Same requirements
25
 *      as for sda_is_open_drain apply.
26
 * @scl_is_output_only: SCL output drivers cannot be turned off.
27
 */
28
struct i2c_gpio_platform_data {
29
        unsigned int    sda_pin;
30
        unsigned int    scl_pin;
31
        int             udelay;
32
        int             timeout;
33
        unsigned int    sda_is_open_drain:1;
34
        unsigned int    scl_is_open_drain:1;
35
        unsigned int    scl_is_output_only:1;
36
};
37
 
38
#endif /* _LINUX_I2C_GPIO_H */

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.