Subversion Repositories test_project

/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $

 *

 * Linux ISDN subsystem

 * Definition of the interface between the subsystem and its low-level drivers.

 *

 * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)

 * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg

 *

 * This software may be used and distributed according to the terms

 * of the GNU General Public License, incorporated herein by reference.

 *

 */

#ifndef __ISDNIF_H__

#define __ISDNIF_H__

/*

 * Values for general protocol-selection

 */

#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */

#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */

#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */

#define ISDN_PTYPE_LEASED    3   /* for leased lines     */

#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */

#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */

/*

 * Values for Layer-2-protocol-selection

 */

#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */

#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */

#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */

#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */

#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */

#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */

#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */

#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */

#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */

#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */

#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */

#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */

#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */

#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */

/*

 * Values for Layer-3-protocol-selection

 */

#define ISDN_PROTO_L3_TRANS     0        /* Transparent */

#define ISDN_PROTO_L3_TRANSDSP  1       /* Transparent with DSP */

#define ISDN_PROTO_L3_FCLASS2   2       /* Fax Group 2/3 CLASS 2 */

#define ISDN_PROTO_L3_FCLASS1   3       /* Fax Group 2/3 CLASS 1 */

#define ISDN_PROTO_L3_MAX       7       /* Max. 8 Protocols */

#ifdef __KERNEL__

#include <linux/skbuff.h>

/***************************************************************************/

/* Extensions made by Werner Cornelius (werner@ikt.de)                     */

/*                                                                         */

/* The proceed command holds a incoming call in a state to leave processes */

/* enough time to check whether ist should be accepted.                    */

/* The PROT_IO Command extends the interface to make protocol dependent    */

/* features available (call diversion, call waiting...).                   */

/*                                                                         */

/* The PROT_IO Command is executed with the desired driver id and the arg  */

/* parameter coded as follows:                                             */

/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE    */

/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/

/* Any additional data is protocol and command specific.                   */

/* This mechanism also applies to the statcallb callback STAT_PROT.        */

/*                                                                         */

/* This suggested extension permits an easy expansion of protocol specific */

/* handling. Extensions may be added at any time without changing the HL   */

/* driver code and not getting conflicts without certifications.           */

/* The well known CAPI 2.0 interface handles such extensions in a similar  */

/* way. Perhaps a protocol specific module may be added and separately     */

/* loaded and linked to the basic isdn module for handling.                */

/***************************************************************************/

/*****************/

/* DSS1 commands */

/*****************/

#define DSS1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_EURO)   /* invoke a supplementary service */

#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO)   /* abort a invoke cmd */

/*******************************/

/* DSS1 Status callback values */

/*******************************/

#define DSS1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_EURO)   /* Result for invocation */

#define DSS1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_EURO)   /* Error Return for invocation */

#define DSS1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_EURO)   /* Deliver invoke broadcast info */

/*********************************************************************/

/* structures for DSS1 commands and callback                         */

/*                                                                   */

/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/

/* timeout, datalen and data fields must be set before calling.      */

/*                                                                   */

/* The return value is a positive hl_id value also delivered in the  */

/* hl_id field. A value of zero signals no more left hl_id capacitys.*/

/* A negative return value signals errors in LL. So if the return    */

/* value is <= 0 no action in LL will be taken -> request ignored    */

/*                                                                   */

/* The timeout field must be filled with a positive value specifying */

/* the amount of time the INVOKED process waits for a reaction from  */

/* the network.                                                      */

/* If a response (either error or result) is received during this    */

/* intervall, a reporting callback is initiated and the process will */

/* be deleted, the hl identifier will be freed.                      */

/* If no response is received during the specified intervall, a error*/

/* callback is initiated with timeout set to -1 and a datalen set    */

/* to 0.                                                             */

/* If timeout is set to a value <= 0 during INVOCATION the process is*/

/* immediately deleted after sending the data. No callback occurs !  */

/*                                                                   */

/* A currently waiting process may be aborted with INVOKE_ABORT. No  */

/* callback will occur when a process has been aborted.              */

/*                                                                   */

/* Broadcast invoke frames from the network are reported via the     */

/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */

/* are supplied by the network and not by the HL.                    */

/*********************************************************************/

/*****************/

/* NI1 commands */

/*****************/

#define NI1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_NI1)   /* invoke a supplementary service */

#define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1)   /* abort a invoke cmd */

/*******************************/

/* NI1 Status callback values */

/*******************************/

#define NI1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_NI1)   /* Result for invocation */

#define NI1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_NI1)   /* Error Return for invocation */

#define NI1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_NI1)   /* Deliver invoke broadcast info */

typedef struct

  { ulong ll_id; /* ID supplied by LL when executing    */

                 /* a command and returned by HL for    */

                 /* INVOKE_RES and INVOKE_ERR           */

    int hl_id;   /* ID supplied by HL when called       */

                 /* for executing a cmd and delivered   */

                 /* for results and errors              */

                 /* must be supplied by LL when aborting*/

    int proc;    /* invoke procedure used by CMD_INVOKE */

                 /* returned by callback and broadcast  */

    int timeout; /* timeout for INVOKE CMD in ms        */

                 /* -1  in stat callback when timed out */

                 /* error value when error callback     */

    int datalen; /* length of cmd or stat data          */

    u_char *data;/* pointer to data delivered or send   */

  } isdn_cmd_stat;

/*

 * Commands from linklevel to lowlevel

 *

 */

#define ISDN_CMD_IOCTL    0       /* Perform ioctl                         */

#define ISDN_CMD_DIAL     1       /* Dial out                              */

#define ISDN_CMD_ACCEPTD  2       /* Accept an incoming call on D-Chan.    */

#define ISDN_CMD_ACCEPTB  3       /* Request B-Channel connect.            */

#define ISDN_CMD_HANGUP   4       /* Hangup                                */

#define ISDN_CMD_CLREAZ   5       /* Clear EAZ(s) of channel               */

#define ISDN_CMD_SETEAZ   6       /* Set EAZ(s) of channel                 */

#define ISDN_CMD_GETEAZ   7       /* Get EAZ(s) of channel                 */

#define ISDN_CMD_SETSIL   8       /* Set Service-Indicator-List of channel */

#define ISDN_CMD_GETSIL   9       /* Get Service-Indicator-List of channel */

#define ISDN_CMD_SETL2   10       /* Set B-Chan. Layer2-Parameter          */

#define ISDN_CMD_GETL2   11       /* Get B-Chan. Layer2-Parameter          */

#define ISDN_CMD_SETL3   12       /* Set B-Chan. Layer3-Parameter          */

#define ISDN_CMD_GETL3   13       /* Get B-Chan. Layer3-Parameter          */

// #define ISDN_CMD_LOCK    14       /* Signal usage by upper levels          */

// #define ISDN_CMD_UNLOCK  15       /* Release usage-lock                    */

#define ISDN_CMD_SUSPEND 16       /* Suspend connection                    */

#define ISDN_CMD_RESUME  17       /* Resume connection                     */

#define ISDN_CMD_PROCEED 18       /* Proceed with call establishment       */

#define ISDN_CMD_ALERT   19       /* Alert after Proceeding                */

#define ISDN_CMD_REDIR   20       /* Redir a incoming call                 */

#define ISDN_CMD_PROT_IO 21       /* Protocol specific commands            */

#define CAPI_PUT_MESSAGE 22       /* CAPI message send down or up          */

#define ISDN_CMD_FAXCMD  23       /* FAX commands to HL-driver             */

#define ISDN_CMD_AUDIO   24       /* DSP, DTMF, ... settings               */

/*

 * Status-Values delivered from lowlevel to linklevel via

 * statcallb().

 *

 */

#define ISDN_STAT_STAVAIL 256    /* Raw status-data available             */

#define ISDN_STAT_ICALL   257    /* Incoming call detected                */

#define ISDN_STAT_RUN     258    /* Signal protocol-code is running       */

#define ISDN_STAT_STOP    259    /* Signal halt of protocol-code          */

#define ISDN_STAT_DCONN   260    /* Signal D-Channel connect              */

#define ISDN_STAT_BCONN   261    /* Signal B-Channel connect              */

#define ISDN_STAT_DHUP    262    /* Signal D-Channel disconnect           */

#define ISDN_STAT_BHUP    263    /* Signal B-Channel disconnect           */

#define ISDN_STAT_CINF    264    /* Charge-Info                           */

#define ISDN_STAT_LOAD    265    /* Signal new lowlevel-driver is loaded  */

#define ISDN_STAT_UNLOAD  266    /* Signal unload of lowlevel-driver      */

#define ISDN_STAT_BSENT   267    /* Signal packet sent                    */

#define ISDN_STAT_NODCH   268    /* Signal no D-Channel                   */

#define ISDN_STAT_ADDCH   269    /* Add more Channels                     */

#define ISDN_STAT_CAUSE   270    /* Cause-Message                         */

#define ISDN_STAT_ICALLW  271    /* Incoming call without B-chan waiting  */

#define ISDN_STAT_REDIR   272    /* Redir result                          */

#define ISDN_STAT_PROT    273    /* protocol IO specific callback         */

#define ISDN_STAT_DISPLAY 274    /* deliver a received display message    */

#define ISDN_STAT_L1ERR   275    /* Signal Layer-1 Error                  */

#define ISDN_STAT_FAXIND  276    /* FAX indications from HL-driver        */

#define ISDN_STAT_AUDIO   277    /* DTMF, DSP indications                 */

#define ISDN_STAT_DISCH   278    /* Disable/Enable channel usage          */

/*

 * Audio commands

 */

#define ISDN_AUDIO_SETDD        0        /* Set DTMF detection           */

#define ISDN_AUDIO_DTMF         1       /* Rx/Tx DTMF                   */

/*

 * Values for errcode field

 */

#define ISDN_STAT_L1ERR_SEND 1

#define ISDN_STAT_L1ERR_RECV 2

/*

 * Values for feature-field of interface-struct.

 */

/* Layer 2 */

#define ISDN_FEATURE_L2_X75I    (0x0001 << ISDN_PROTO_L2_X75I)

#define ISDN_FEATURE_L2_X75UI   (0x0001 << ISDN_PROTO_L2_X75UI)

#define ISDN_FEATURE_L2_X75BUI  (0x0001 << ISDN_PROTO_L2_X75BUI)

#define ISDN_FEATURE_L2_HDLC    (0x0001 << ISDN_PROTO_L2_HDLC)

#define ISDN_FEATURE_L2_TRANS   (0x0001 << ISDN_PROTO_L2_TRANS)

#define ISDN_FEATURE_L2_X25DTE  (0x0001 << ISDN_PROTO_L2_X25DTE)

#define ISDN_FEATURE_L2_X25DCE  (0x0001 << ISDN_PROTO_L2_X25DCE)

#define ISDN_FEATURE_L2_V11096  (0x0001 << ISDN_PROTO_L2_V11096)

#define ISDN_FEATURE_L2_V11019  (0x0001 << ISDN_PROTO_L2_V11019)

#define ISDN_FEATURE_L2_V11038  (0x0001 << ISDN_PROTO_L2_V11038)

#define ISDN_FEATURE_L2_MODEM   (0x0001 << ISDN_PROTO_L2_MODEM)

#define ISDN_FEATURE_L2_FAX     (0x0001 << ISDN_PROTO_L2_FAX)

#define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K)

#define ISDN_FEATURE_L2_MASK    (0x0FFFF) /* Max. 16 protocols */

#define ISDN_FEATURE_L2_SHIFT   (0)

/* Layer 3 */

#define ISDN_FEATURE_L3_TRANS   (0x10000 << ISDN_PROTO_L3_TRANS)

#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP)

#define ISDN_FEATURE_L3_FCLASS2 (0x10000 << ISDN_PROTO_L3_FCLASS2)

#define ISDN_FEATURE_L3_FCLASS1 (0x10000 << ISDN_PROTO_L3_FCLASS1)

#define ISDN_FEATURE_L3_MASK    (0x0FF0000) /* Max. 8 Protocols */

#define ISDN_FEATURE_L3_SHIFT   (16)

/* Signaling */

#define ISDN_FEATURE_P_UNKNOWN  (0x1000000 << ISDN_PTYPE_UNKNOWN)

#define ISDN_FEATURE_P_1TR6     (0x1000000 << ISDN_PTYPE_1TR6)

#define ISDN_FEATURE_P_EURO     (0x1000000 << ISDN_PTYPE_EURO)

#define ISDN_FEATURE_P_NI1      (0x1000000 << ISDN_PTYPE_NI1)

#define ISDN_FEATURE_P_MASK     (0x0FF000000) /* Max. 8 Protocols */

#define ISDN_FEATURE_P_SHIFT    (24)

typedef struct setup_parm {

    unsigned char phone[32];    /* Remote Phone-Number */

    unsigned char eazmsn[32];   /* Local EAZ or MSN    */

    unsigned char si1;      /* Service Indicator 1 */

    unsigned char si2;      /* Service Indicator 2 */

    unsigned char plan;     /* Numbering plan      */

    unsigned char screen;   /* Screening info      */

} setup_parm;

#ifdef CONFIG_ISDN_TTY_FAX

/* T.30 Fax G3 */

#define FAXIDLEN 21

typedef struct T30_s {

        /* session parameters */

        __u8 resolution;

        __u8 rate;

        __u8 width;

        __u8 length;

        __u8 compression;

        __u8 ecm;

        __u8 binary;

        __u8 scantime;

        __u8 id[FAXIDLEN];

        /* additional parameters */

        __u8 phase;

        __u8 direction;

        __u8 code;

        __u8 badlin;

        __u8 badmul;

        __u8 bor;

        __u8 fet;

        __u8 pollid[FAXIDLEN];

        __u8 cq;

        __u8 cr;

        __u8 ctcrty;

        __u8 minsp;

        __u8 phcto;

        __u8 rel;

        __u8 nbc;

        /* remote station parameters */

        __u8 r_resolution;

        __u8 r_rate;

        __u8 r_width;

        __u8 r_length;

        __u8 r_compression;

        __u8 r_ecm;

        __u8 r_binary;

        __u8 r_scantime;

        __u8 r_id[FAXIDLEN];

        __u8 r_code;

} __attribute__((packed)) T30_s;

#define ISDN_TTY_FAX_CONN_IN    0

#define ISDN_TTY_FAX_CONN_OUT   1

#define ISDN_TTY_FAX_FCON       0

#define ISDN_TTY_FAX_DIS        1

#define ISDN_TTY_FAX_FTT        2

#define ISDN_TTY_FAX_MCF        3

#define ISDN_TTY_FAX_DCS        4

#define ISDN_TTY_FAX_TRAIN_OK   5

#define ISDN_TTY_FAX_EOP        6

#define ISDN_TTY_FAX_EOM        7

#define ISDN_TTY_FAX_MPS        8

#define ISDN_TTY_FAX_DTC        9

#define ISDN_TTY_FAX_RID        10

#define ISDN_TTY_FAX_HNG        11

#define ISDN_TTY_FAX_DT         12

#define ISDN_TTY_FAX_FCON_I     13

#define ISDN_TTY_FAX_DR         14

#define ISDN_TTY_FAX_ET         15

#define ISDN_TTY_FAX_CFR        16

#define ISDN_TTY_FAX_PTS        17

#define ISDN_TTY_FAX_SENT       18

#define ISDN_FAX_PHASE_IDLE     0

#define ISDN_FAX_PHASE_A        1

#define ISDN_FAX_PHASE_B        2

#define ISDN_FAX_PHASE_C        3

#define ISDN_FAX_PHASE_D        4

#define ISDN_FAX_PHASE_E        5

#endif /* TTY_FAX */

#define ISDN_FAX_CLASS1_FAE     0

#define ISDN_FAX_CLASS1_FTS     1

#define ISDN_FAX_CLASS1_FRS     2

#define ISDN_FAX_CLASS1_FTM     3

#define ISDN_FAX_CLASS1_FRM     4

#define ISDN_FAX_CLASS1_FTH     5

#define ISDN_FAX_CLASS1_FRH     6

#define ISDN_FAX_CLASS1_CTRL    7

#define ISDN_FAX_CLASS1_OK      0

#define ISDN_FAX_CLASS1_CONNECT 1

#define ISDN_FAX_CLASS1_NOCARR  2

#define ISDN_FAX_CLASS1_ERROR   3

#define ISDN_FAX_CLASS1_FCERROR 4

#define ISDN_FAX_CLASS1_QUERY   5

typedef struct {

        __u8    cmd;

        __u8    subcmd;

        __u8    para[50];

} aux_s;

#define AT_COMMAND      0

#define AT_EQ_VALUE     1

#define AT_QUERY        2

#define AT_EQ_QUERY     3

/* CAPI structs */

/* this is compatible to the old union size */

#define MAX_CAPI_PARA_LEN 50

typedef struct {

        /* Header */

        __u16 Length;

        __u16 ApplId;

        __u8 Command;

        __u8 Subcommand;

        __u16 Messagenumber;

        /* Parameter */

        union {

                __u32 Controller;

                __u32 PLCI;

                __u32 NCCI;

        } adr;

        __u8 para[MAX_CAPI_PARA_LEN];

} capi_msg;

/*

 * Structure for exchanging above infos

 *

 */

typedef struct {

        int   driver;           /* Lowlevel-Driver-ID            */

        int   command;          /* Command or Status (see above) */

        ulong arg;              /* Additional Data               */

        union {

                ulong errcode;  /* Type of error with STAT_L1ERR        */

                int length;     /* Amount of bytes sent with STAT_BSENT */

                u_char num[50]; /* Additional Data                      */

                setup_parm setup;/* For SETUP msg                       */

                capi_msg cmsg;  /* For CAPI like messages               */

                char display[85];/* display message data                */

                isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result      */

                aux_s aux;      /* for modem commands/indications       */

#ifdef CONFIG_ISDN_TTY_FAX

                T30_s   *fax;   /* Pointer to ttys fax struct           */

#endif

                ulong userdata; /* User Data */

        } parm;

} isdn_ctrl;

#define dss1_io    isdn_io

#define ni1_io     isdn_io

/*

 * The interface-struct itself (initialized at load-time of lowlevel-driver)

 *

 * See Documentation/isdn/INTERFACE for a description, how the communication

 * between the ISDN subsystem and its drivers is done.

 *

 */

typedef struct {

  struct module *owner;

  /* Number of channels supported by this driver

   */

  int channels;

  /*

   * Maximum Size of transmit/receive-buffer this driver supports.

   */

  int maxbufsize;

  /* Feature-Flags for this driver.

   * See defines ISDN_FEATURE_... for Values

   */

  unsigned long features;

  /*

   * Needed for calculating

   * dev->hard_header_len = linklayer header + hl_hdrlen;

   * Drivers, not supporting sk_buff's should set this to 0.

   */

  unsigned short hl_hdrlen;

  /*

   * Receive-Callback using sk_buff's

   * Parameters:

   *             int                    Driver-ID

   *             int                    local channel-number (0 ...)

   *             struct sk_buff *skb    received Data

   */

  void (*rcvcallb_skb)(int, int, struct sk_buff *);

  /* Status-Callback

   * Parameters:

   *             isdn_ctrl*

   *                   driver  = Driver ID.

   *                   command = One of above ISDN_STAT_... constants.

   *                   arg     = depending on status-type.

   *                   num     = depending on status-type.

   */

  int (*statcallb)(isdn_ctrl*);

  /* Send command

   * Parameters:

   *             isdn_ctrl*

   *                   driver  = Driver ID.

   *                   command = One of above ISDN_CMD_... constants.

   *                   arg     = depending on command.

   *                   num     = depending on command.

   */

  int (*command)(isdn_ctrl*);

  /*

   * Send data using sk_buff's

   * Parameters:

   *             int                    driverId

   *             int                    local channel-number (0...)

   *             int                    Flag: Need ACK for this packet.

   *             struct sk_buff *skb    Data to send

   */

  int (*writebuf_skb) (int, int, int, struct sk_buff *);

  /* Send raw D-Channel-Commands

   * Parameters:

   *             u_char pointer data

   *             int    length of data

   *             int    driverId

   *             int    local channel-number (0 ...)

   */

  int (*writecmd)(const u_char __user *, int, int, int);

  /* Read raw Status replies

   *             u_char pointer data (volatile)

   *             int    length of buffer

   *             int    driverId

   *             int    local channel-number (0 ...)

   */

  int (*readstat)(u_char __user *, int, int, int);

  char id[20];

} isdn_if;

/*

 * Function which must be called by lowlevel-driver at loadtime with

 * the following fields of above struct set:

 *

 * channels     Number of channels that will be supported.

 * hl_hdrlen    Space to preserve in sk_buff's when sending. Drivers, not

 *              supporting sk_buff's should set this to 0.

 * command      Address of Command-Handler.

 * features     Bitwise coded Features of this driver. (use ISDN_FEATURE_...)

 * writebuf_skb Address of Skbuff-Send-Handler.

 * writecmd        "    "  D-Channel  " which accepts raw D-Ch-Commands.

 * readstat        "    "  D-Channel  " which delivers raw Status-Data.

 *

 * The linklevel-driver fills the following fields:

 *

 * channels      Driver-ID assigned to this driver. (Must be used on all

 *               subsequent callbacks.

 * rcvcallb_skb  Address of handler for received Skbuff's.

 * statcallb        "    "     "    for status-changes.

 *

 */

extern int register_isdn(isdn_if*);

#include <asm/uaccess.h>

#endif /* __KERNEL__ */

#endif /* __ISDNIF_H__ */