| 1 |
62 |
marcus.erl |
#ifndef __LINUX_USB_GADGETFS_H
|
| 2 |
|
|
#define __LINUX_USB_GADGETFS_H
|
| 3 |
|
|
|
| 4 |
|
|
#include <asm/types.h>
|
| 5 |
|
|
#include <asm/ioctl.h>
|
| 6 |
|
|
|
| 7 |
|
|
#include <linux/usb/ch9.h>
|
| 8 |
|
|
|
| 9 |
|
|
/*
|
| 10 |
|
|
* Filesystem based user-mode API to USB Gadget controller hardware
|
| 11 |
|
|
*
|
| 12 |
|
|
* Other than ep0 operations, most things are done by read() and write()
|
| 13 |
|
|
* on endpoint files found in one directory. They are configured by
|
| 14 |
|
|
* writing descriptors, and then may be used for normal stream style
|
| 15 |
|
|
* i/o requests. When ep0 is configured, the device can enumerate;
|
| 16 |
|
|
* when it's closed, the device disconnects from usb. Operations on
|
| 17 |
|
|
* ep0 require ioctl() operations.
|
| 18 |
|
|
*
|
| 19 |
|
|
* Configuration and device descriptors get written to /dev/gadget/$CHIP,
|
| 20 |
|
|
* which may then be used to read usb_gadgetfs_event structs. The driver
|
| 21 |
|
|
* may activate endpoints as it handles SET_CONFIGURATION setup events,
|
| 22 |
|
|
* or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
|
| 23 |
|
|
* then performing data transfers by reading or writing.
|
| 24 |
|
|
*/
|
| 25 |
|
|
|
| 26 |
|
|
/*
|
| 27 |
|
|
* Events are delivered on the ep0 file descriptor, when the user mode driver
|
| 28 |
|
|
* reads from this file descriptor after writing the descriptors. Don't
|
| 29 |
|
|
* stop polling this descriptor.
|
| 30 |
|
|
*/
|
| 31 |
|
|
|
| 32 |
|
|
enum usb_gadgetfs_event_type {
|
| 33 |
|
|
GADGETFS_NOP = 0,
|
| 34 |
|
|
|
| 35 |
|
|
GADGETFS_CONNECT,
|
| 36 |
|
|
GADGETFS_DISCONNECT,
|
| 37 |
|
|
GADGETFS_SETUP,
|
| 38 |
|
|
GADGETFS_SUSPEND,
|
| 39 |
|
|
// and likely more !
|
| 40 |
|
|
};
|
| 41 |
|
|
|
| 42 |
|
|
/* NOTE: this structure must stay the same size and layout on
|
| 43 |
|
|
* both 32-bit and 64-bit kernels.
|
| 44 |
|
|
*/
|
| 45 |
|
|
struct usb_gadgetfs_event {
|
| 46 |
|
|
union {
|
| 47 |
|
|
// NOP, DISCONNECT, SUSPEND: nothing
|
| 48 |
|
|
// ... some hardware can't report disconnection
|
| 49 |
|
|
|
| 50 |
|
|
// CONNECT: just the speed
|
| 51 |
|
|
enum usb_device_speed speed;
|
| 52 |
|
|
|
| 53 |
|
|
// SETUP: packet; DATA phase i/o precedes next event
|
| 54 |
|
|
// (setup.bmRequestType & USB_DIR_IN) flags direction
|
| 55 |
|
|
// ... includes SET_CONFIGURATION, SET_INTERFACE
|
| 56 |
|
|
struct usb_ctrlrequest setup;
|
| 57 |
|
|
} u;
|
| 58 |
|
|
enum usb_gadgetfs_event_type type;
|
| 59 |
|
|
};
|
| 60 |
|
|
|
| 61 |
|
|
|
| 62 |
|
|
/* endpoint ioctls */
|
| 63 |
|
|
|
| 64 |
|
|
/* IN transfers may be reported to the gadget driver as complete
|
| 65 |
|
|
* when the fifo is loaded, before the host reads the data;
|
| 66 |
|
|
* OUT transfers may be reported to the host's "client" driver as
|
| 67 |
|
|
* complete when they're sitting in the FIFO unread.
|
| 68 |
|
|
* THIS returns how many bytes are "unclaimed" in the endpoint fifo
|
| 69 |
|
|
* (needed for precise fault handling, when the hardware allows it)
|
| 70 |
|
|
*/
|
| 71 |
|
|
#define GADGETFS_FIFO_STATUS _IO('g',1)
|
| 72 |
|
|
|
| 73 |
|
|
/* discards any unclaimed data in the fifo. */
|
| 74 |
|
|
#define GADGETFS_FIFO_FLUSH _IO('g',2)
|
| 75 |
|
|
|
| 76 |
|
|
/* resets endpoint halt+toggle; used to implement set_interface.
|
| 77 |
|
|
* some hardware (like pxa2xx) can't support this.
|
| 78 |
|
|
*/
|
| 79 |
|
|
#define GADGETFS_CLEAR_HALT _IO('g',3)
|
| 80 |
|
|
|
| 81 |
|
|
#endif /* __LINUX_USB_GADGETFS_H */
|
