URL https://opencores.org/ocsvn/theia_gpu/theia_gpu/trunk
Subversion Repositories theia_gpu

[/] [theia_gpu/] [branches/] [beta_1.1/] [rtl/] [EXE/] [Module_VectorALU.v] - Blame information for rev 200

Go to most recent revision | Details | Compare with Previous | View Log

`timescale 1ns / 1ps
`include "aDefinitions.v"
/**********************************************************************************
Theia, Ray Cast Programable graphic Processing Unit.
Copyright (C) 2010  Diego Valverde (diego.valverde.g@gmail.com)
 
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 
***********************************************************************************/
 
 
 
//--------------------------------------------------------------
module VectorALU
(
        input wire                                              Clock,
        input wire                                              Reset,
        input  wire[`INSTRUCTION_OP_LENGTH-1:0]          iOperation,
        input  wire[`WIDTH-1:0]                                                          iChannel_Ax,
        input  wire[`WIDTH-1:0]                                                          iChannel_Bx,
        input  wire[`WIDTH-1:0]                                                          iChannel_Ay,
        input  wire[`WIDTH-1:0]                                                          iChannel_By,
        input  wire[`WIDTH-1:0]                                                          iChannel_Az,
        input  wire[`WIDTH-1:0]                                                          iChannel_Bz,
        output wire [`WIDTH-1:0]                                                 oResultA,
        output wire [`WIDTH-1:0]                                                 oResultB,
        output wire [`WIDTH-1:0]                                                 oResultC,
        input    wire                                                                                           iInputReady,
        output reg                                                                                              oBranchTaken,
        output reg                                                                                              oBranchNotTaken,
        output reg                                                                                              OutputReady
 
);
 
wire wMultiplcationUnscaled;
assign wMultiplcationUnscaled = (iOperation == `IMUL) ? 1'b1 : 1'b0;
 
//--------------------------------------------------------------
 
reg [7:0]         InputReadyA,InputReadyB,InputReadyC;
 
//------------------------------------------------------
/*
        This is the block that takes care of all tha arithmetic
        comparisons. Supported operations are <,>,<=,>=,==,!=
 
*/
//------------------------------------------------------
reg [`WIDTH-1:0] wMultiplicationA_Ax;
reg  [`WIDTH-1:0] wMultiplicationA_Bx;
wire [`LONG_WIDTH-1:0] wMultiplicationA_Result;
wire  wMultiplicationA_InputReady;
wire wMultiplicationA_OutputReady;
wire wMultiplicationOutputReady, wMultiplicationOutputReadyA,
wMultiplicationOutputReadyB,wMultiplicationOutputReadyC,wMultiplicationOutputReadyD;
 
wire wAddSubAOutputReady,wAddSubBOutputReady,wAddSubCOutputReady;
 
//--------------------------------------------------------------------
reg [`WIDTH-1:0] ResultA,ResultB,ResultC;
 
//Output Flip Flops,
//This flip flop will control the outputs so that the
//values of the outputs change ONLY when when there is 
//a positive edge of OutputReady
 
FFD32_POSEDGE ResultAFFD
(
        .Clock( OutputReady ),
        .D( ResultA ),
        .Q( oResultA )
);
 
FFD32_POSEDGE ResultBFFD
(
        .Clock( OutputReady ),
        .D( ResultB ),
        .Q( oResultB )
);
 
FFD32_POSEDGE ResultCFFD
(
        .Clock( OutputReady ),
        .D( ResultC ),
        .Q( oResultC )
);
//--------------------------------------------------------------------
wire [`WIDTH-1:0] wSwizzleOutputX,wSwizzleOutputY,wSwizzleOutputZ;
 
 
Swizzle3D Swizzle1
(
        .Source0_X( iChannel_Bx ),
        .Source0_Y( iChannel_By ),
        .Source0_Z( iChannel_Bz ),
        .iOperation( iChannel_Ax ),
 
        .SwizzleX( wSwizzleOutputX ),
        .SwizzleY( wSwizzleOutputY ),
        .SwizzleZ( wSwizzleOutputZ )
);
//---------------------------------------------------------------------
wire [`LONG_WIDTH-1:0] wModulus2N_ResultA,wModulus2N_ResultB,wModulus2N_ResultC;
//wire wModulusOutputReadyA,wModulusOutputReadyB,wModulusOutputReadyC;
 
/*
Modulus2N MODA
(
        .Clock( Clock ),
        .Reset( Reset ),
        .oQuotient( wModulus2N_ResultA ),
        .iInputReady( iInputReady ),
        .oOutputReady( wModulusOutputReadyA )
);
 
Modulus2N MODB
(
        .Clock( Clock ),
        .Reset( Reset ),
        .oQuotient( wModulus2N_ResultB ),
        .iInputReady( iInputReady ),
        .oOutputReady( wModulusOutputReadyB )
);
 
Modulus2N MODC
(
        .Clock( Clock ),
        .Reset( Reset ),
        .oQuotient( wModulus2N_ResultC ),
        .iInputReady( iInputReady ),
        .oOutputReady( wModulusOutputReadyC )
);
*/
//---------------------------------------------------------------------(
 
 
 
 
/*
        This MUX will select the apropiated X,Y or Z depending on
        wheter it is XYZ iOperation. This gets defined by the bits 3 and 4
        of iOperation, and only applies for oBranchTaken and Store operations.
*/
 
wire                                    wArithmeticComparison_Result;
wire                                    ArithmeticComparison_InputReady;
wire                                    ArithmeticComparison_OutputReady;
reg[`WIDTH-1:0]  ArithmeticComparison_A,ArithmeticComparison_B;
 
 
always @ ( * )
begin
        case ( {iOperation[4],iOperation[3]} )
                2'b01:          ArithmeticComparison_A = iChannel_Ax;
                2'b10:          ArithmeticComparison_A = iChannel_Ay;
                2'b11:          ArithmeticComparison_A = iChannel_Az;
                default: ArithmeticComparison_A = 0;     //Should never happen
        endcase
end
//---------------------------------------------------------------------
always @ ( * )
begin
        case ( {iOperation[4],iOperation[3]} )
                2'b01:          ArithmeticComparison_B = iChannel_Bx;
                2'b10:          ArithmeticComparison_B = iChannel_By;
                2'b11:          ArithmeticComparison_B = iChannel_Bz;
                default: ArithmeticComparison_B = 0;     //Should never happen
        endcase
end
 
//---------------------------------------------------------------------
/*
        The onbly instance of Aritmetic comparison in the ALU,
        ArithmeticComparison operations matches the 3 LSB of
        Global ALU iOperation for oBranchTaken Instruction family
*/
 
assign ArithmeticComparison_InputReady = iInputReady;
 
wire wArithmeticComparisonResult;
 
ArithmeticComparison ArithmeticComparison_1
(
        .Clock( Clock ),
        .X( ArithmeticComparison_A ),
        .Y( ArithmeticComparison_B ),
        .iOperation( iOperation[2:0] ),
        .iInputReady( ArithmeticComparison_InputReady ),
        .OutputReady( ArithmeticComparison_OutputReady ),
        .Result( wArithmeticComparisonResult )
);
 
 
assign  wArithmeticComparison_Result = wArithmeticComparisonResult && OutputReady;
//--------------------------------------------------------------------
 RADIX_R_MUL_32_FULL_PARALLEL MultiplicationChannel_A
(
 
        .Clock( Clock ),
        .Reset( Reset ),
        .A( wMultiplicationA_Ax ),
        .B( wMultiplicationA_Bx ),
        .R( wMultiplicationA_Result ),
        .iUnscaled( wMultiplcationUnscaled ),
        .iInputReady( wMultiplicationA_InputReady ),
        .OutputReady( wMultiplicationA_OutputReady )
);
 
//--------------------------------------------------------------------
always @ ( * )
begin
        case (iOperation)
        `CROSS:                 wMultiplicationA_Ax = iChannel_Ay;      // Ay * Bz
        `MAG:                   wMultiplicationA_Ax = iChannel_Ax;
        `MULP:          wMultiplicationA_Ax = iChannel_Ax;      //Az = Ax * Ay
        default:        wMultiplicationA_Ax = iChannel_Ax;      // Ax * Bx
        endcase
end
//--------------------------------------------------------------------
 
//assign wMultiplicationA_Ax = iChannel_Ax;
 
assign wMultiplicationA_InputReady
        = (iOperation == `CROSS ||
                iOperation == `DOT      ||
                iOperation == `MUL      ||
                iOperation == `IMUL     ||
                iOperation == `MAG      ||
                iOperation == `MULP
                ) ? iInputReady : 0;
 
//--------------------------------------------------------------------
always @ ( * )
begin
        case (iOperation)
        `MUL,`IMUL:                     wMultiplicationA_Bx = iChannel_Bx;      //Ax*Bx
        `MAG:                   wMultiplicationA_Bx = iChannel_Ax;      //Ax^2
        `DOT:                   wMultiplicationA_Bx = iChannel_Bx;      //Ax*Bx
        `CROSS:         wMultiplicationA_Bx = iChannel_Bz;      // Ay * Bz
        `MULP:          wMultiplicationA_Bx = iChannel_Ay;  //Az = Ax * Ay
        default:                wMultiplicationA_Bx = 32'b0;
        endcase
end
//--------------------------------------------------------------------
 
//------------------------------------------------------
 
reg [`WIDTH-1:0] wMultiplicationB_Ay;
reg [`WIDTH-1:0]  wMultiplicationB_By;
wire [`LONG_WIDTH-1:0] wMultiplicationB_Result;
wire wMultiplicationB_InputReady;
wire wMultiplicationB_OutputReady;
 
 
RADIX_R_MUL_32_FULL_PARALLEL MultiplicationChannel_B
(
 
        .Clock( Clock ),
        .Reset( Reset ),
        .A( wMultiplicationB_Ay ),
        .B( wMultiplicationB_By ),
        .R( wMultiplicationB_Result ),
        .iUnscaled( wMultiplcationUnscaled ),
        .iInputReady( wMultiplicationB_InputReady ),
        .OutputReady( wMultiplicationB_OutputReady )
);
 
 
//----------------------------------------------------
 
always @ ( * )
begin
        case (iOperation)
                `CROSS:         wMultiplicationB_Ay = iChannel_Az;      // Az * By
                `MAG:   wMultiplicationB_Ay = iChannel_Ay;
                default: wMultiplicationB_Ay = iChannel_Ay;     // Ay * By
        endcase
end
//----------------------------------------------------
assign wMultiplicationB_InputReady
        = (iOperation == `CROSS                         ||
                iOperation == `DOT      ||
                iOperation == `MUL              ||
                iOperation == `IMUL             ||
                iOperation == `MAG ) ? iInputReady : 0;
 
//----------------------------------------------------
always @ ( * )
begin
        case (iOperation)
        `MUL,`IMUL:                     wMultiplicationB_By = iChannel_By;      //Ay*By
        `MAG:                   wMultiplicationB_By = iChannel_Ay;      //Ay^2
        `DOT:                   wMultiplicationB_By = iChannel_By;      //Ay*By
        `CROSS:         wMultiplicationB_By = iChannel_By;      // Az * By
        default:                wMultiplicationB_By = 32'b0;
        endcase
end
//----------------------------------------------------
 
//------------------------------------------------------
reg [`WIDTH-1:0] wMultiplicationC_Az;
reg  [`WIDTH-1:0] wMultiplicationC_Bz;
wire [`LONG_WIDTH-1:0] wMultiplicationC_Result;
wire wMultiplicationC_InputReady;
wire wMultiplicationC_OutputReady;
 
 
RADIX_R_MUL_32_FULL_PARALLEL MultiplicationChannel_C
(
 
        .Clock( Clock ),
        .Reset( Reset ),
        .A( wMultiplicationC_Az ),
        .B( wMultiplicationC_Bz ),
        .R( wMultiplicationC_Result ),
        .iUnscaled( wMultiplcationUnscaled ),
        .iInputReady( wMultiplicationC_InputReady ),
        .OutputReady( wMultiplicationC_OutputReady )
);
 
 
//----------------------------------------------------
always @ ( * )
begin
        case (iOperation)
                `CROSS:         wMultiplicationC_Az = iChannel_Az;      //Az*Bx
                `MAG:   wMultiplicationC_Az = iChannel_Az;
                default:                                wMultiplicationC_Az = iChannel_Az;      //Az*Bz
        endcase
end
//----------------------------------------------------
 
assign wMultiplicationC_InputReady
        = (
                iOperation == `CROSS                    ||
                iOperation == `DOT      ||
                iOperation == `MUL              ||
                iOperation == `IMUL             ||
                iOperation == `MAG
                ) ? iInputReady : 0;
 
//----------------------------------------------------
always @ ( * )
begin
        case (iOperation)
        `MUL,`IMUL:                     wMultiplicationC_Bz = iChannel_Bz;      //Az*Bz
        `MAG:                   wMultiplicationC_Bz = iChannel_Az;      //Ay^2
        `DOT:                   wMultiplicationC_Bz = iChannel_Bz;      //Az*Bz
        `CROSS:         wMultiplicationC_Bz = iChannel_Bx;      //Az*Bx
        default:                wMultiplicationC_Bz = 32'b0;
        endcase
end
//----------------------------------------------------  
 
reg [`WIDTH-1:0] wMultiplicationD_Aw;
reg  [`WIDTH-1:0] wMultiplicationD_Bw;
wire [`LONG_WIDTH-1:0] wMultiplicationD_Result;
wire wMultiplicationD_InputReady;
wire wMultiplicationD_OutputReady;
 
 
RADIX_R_MUL_32_FULL_PARALLEL MultiplicationChannel_D
(
 
        .Clock( Clock ),
        .Reset( Reset ),
        .A( wMultiplicationD_Aw ),
        .B( wMultiplicationD_Bw ),
        .R( wMultiplicationD_Result ),
        .iUnscaled( wMultiplcationUnscaled ),
        .iInputReady( wMultiplicationD_InputReady ),
        .OutputReady( wMultiplicationD_OutputReady )
);
 
assign wMultiplicationD_InputReady
        = (iOperation == `CROSS ) ? iInputReady : 0;
 
 
//----------------------------------------------------  
always @ ( * )
begin
        case (iOperation)
        `CROSS:                 wMultiplicationD_Aw = iChannel_Ax;      //Ax*Bz
        default:                                                        wMultiplicationD_Aw = 32'b0;
        endcase
end
//----------------------------------------------------  
always @ ( * )
begin
        case (iOperation)
        `CROSS:                 wMultiplicationD_Bw = iChannel_Bz;      //Ax*Bz
        default:                                                        wMultiplicationD_Bw = 32'b0;
        endcase
end
//----------------------------------------------------  
reg [`WIDTH-1:0] wMultiplicationE_Ak;
reg  [`WIDTH-1:0] wMultiplicationE_Bk;
wire [`LONG_WIDTH-1:0] wMultiplicationE_Result;
wire wMultiplicationE_InputReady;
wire wMultiplicationE_OutputReady;
 
 
RADIX_R_MUL_32_FULL_PARALLEL MultiplicationChannel_E
(
 
        .Clock( Clock ),
        .Reset( Reset ),
        .A( wMultiplicationE_Ak ),
        .B( wMultiplicationE_Bk ),
        .R( wMultiplicationE_Result ),
        .iUnscaled( wMultiplcationUnscaled ),
        .iInputReady( wMultiplicationE_InputReady ),
        .OutputReady( wMultiplicationE_OutputReady )
);
 
assign wMultiplicationE_InputReady
        = (iOperation == `CROSS ) ? iInputReady : 0;
 
 
//----------------------------------------------------  
always @ ( * )
begin
        case (iOperation)
        `CROSS:                 wMultiplicationE_Ak = iChannel_Ax;      //Ax*By
        default:                        wMultiplicationE_Ak = 32'b0;
        endcase
end
//----------------------------------------------------  
always @ ( * )
begin
        case (iOperation)
        `CROSS:                 wMultiplicationE_Bk = iChannel_By;      //Ax*By
        default:                        wMultiplicationE_Bk = 32'b0;
        endcase
end
 
//----------------------------------------------------          
reg [`WIDTH-1:0] wMultiplicationF_Al;
reg  [`WIDTH-1:0] wMultiplicationF_Bl;
wire [`LONG_WIDTH-1:0] wMultiplicationF_Result;
wire wMultiplicationF_InputReady;
wire wMultiplicationF_OutputReady;
 
 
RADIX_R_MUL_32_FULL_PARALLEL MultiplicationChannel_F
(
 
        .Clock( Clock ),
        .Reset( Reset ),
        .A( wMultiplicationF_Al ),
        .B( wMultiplicationF_Bl ),
        .R( wMultiplicationF_Result ),
        .iUnscaled( wMultiplcationUnscaled ),
        .iInputReady( wMultiplicationF_InputReady ),
        .OutputReady( wMultiplicationF_OutputReady )
);
assign wMultiplicationF_InputReady
        = (iOperation == `CROSS ) ? iInputReady : 0;
 
 
//----------------------------------------------------  
always @ ( * )
begin
        case (iOperation)
        `CROSS:                 wMultiplicationF_Al = iChannel_Ay;      //Ay*Bx
        default:                        wMultiplicationF_Al = 32'b0;
        endcase
end
//----------------------------------------------------  
always @ ( * )
begin
        case (iOperation)
        `CROSS:                 wMultiplicationF_Bl = iChannel_Bx;      //Ay*Bx
        default:                        wMultiplicationF_Bl = 32'b0;
        endcase
end
//------------------------------------------------------
wire [`WIDTH-1:0] wDivisionA_Result;
wire wDivisionA_OutputReady;
wire wDivisionA_InputReady;
 
assign wDivisionA_InputReady =
        ( iOperation == `DIV) ? iInputReady : 0;
 
SignedIntegerDivision DivisionChannel_A
(
.Clock( Clock ),
.Reset( Reset ),
.iDividend( iChannel_Ax ),
.iDivisor(      iChannel_Bx ),
.xQuotient( wDivisionA_Result ),
.iInputReady( wDivisionA_InputReady ),
.OutputReady( wDivisionA_OutputReady )
 
);
//------------------------------------------------------
wire [`WIDTH-1:0] wDivisionB_Result;
wire wDivisionB_OutputReady;
wire wDivisionB_InputReady;
 
assign wDivisionB_InputReady =
        ( iOperation == `DIV) ? iInputReady : 0;
 
SignedIntegerDivision DivisionChannel_B
(
.Clock( Clock ),
.Reset( Reset ),
.iDividend( iChannel_Ay ),
.iDivisor( iChannel_By ),
.xQuotient( wDivisionB_Result ),
.iInputReady( wDivisionB_InputReady ),
.OutputReady( wDivisionB_OutputReady )
 
);
//------------------------------------------------------
wire [`WIDTH-1:0] wDivisionC_Result;
wire wDivisionC_OutputReady;
wire wDivisionC_InputReady;
 
 
assign wDivisionC_InputReady =
        ( iOperation == `DIV) ? iInputReady : 0;
 
SignedIntegerDivision DivisionChannel_C
(
.Clock( Clock ),
.Reset( Reset ),
.iDividend( iChannel_Az ),
.iDivisor( iChannel_Bz ),
.xQuotient( wDivisionC_Result ),
.iInputReady( wDivisionC_InputReady ),
.OutputReady( wDivisionC_OutputReady )
 
);
//--------------------------------------------------------------
/*
        First addtion block instance goes here.
        Note that all inputs/outputs to the block
        are wires. It has two MUXES one for each entry.
*/
reg [`LONG_WIDTH-1:0] wAddSubA_Ax,wAddSubA_Bx;
wire [`LONG_WIDTH-1:0] wAddSubA_Result;
wire wAddSubA_Operation; //Either addition or substraction
reg wAddSubA_InputReady;
wire wAddSubA_OutputReady;
 
assign wAddSubA_Operation
        = (
                iOperation == `SUB
                || iOperation == `CROSS
                || iOperation == `DEC
                || iOperation == `MOD
        ) ? 1 : 0;
 
FixedAddSub AddSubChannel_A
(
.Clock( Clock ),
.Reset( Reset ),
.A( wAddSubA_Ax ),
.B( wAddSubA_Bx ),
.R( wAddSubA_Result ),
.iOperation( wAddSubA_Operation ),
.iInputReady( wAddSubA_InputReady ),
.OutputReady( wAddSubA_OutputReady )
);
//Diego
 
 
//----------------------------
 
//InpuReady Mux A
always @ ( * )
begin
        case (iOperation)
        `ADD:           wAddSubA_InputReady = iInputReady;
        `SUB:           wAddSubA_InputReady = iInputReady;
        `INC,`INCX,`INCY,`INCZ:         wAddSubA_InputReady = iInputReady;
        `DEC:           wAddSubA_InputReady = iInputReady;
        `MOD:           wAddSubA_InputReady = iInputReady;
 
        `MAG:           wAddSubA_InputReady = wMultiplicationOutputReadyA &&
                                                                                                wMultiplicationOutputReadyB;
                                                                                //wMultiplicationA_OutputReady 
                                                                                //&& wMultiplicationB_OutputReady;
 
        `DOT:           wAddSubA_InputReady =
                                                                                        wMultiplicationOutputReadyA &&
                                                                                        wMultiplicationOutputReadyB;
                                                                                //wMultiplicationA_OutputReady 
                                                                                //&& wMultiplicationB_OutputReady;
 
        `CROSS: wAddSubA_InputReady =
                                                                                wMultiplicationOutputReadyA &&
                                                                                wMultiplicationOutputReadyB;
                                                                                // wMultiplicationA_OutputReady
                                                                                //&& wMultiplicationB_OutputReady;
 
        default:        wAddSubA_InputReady = 1'b0;
        endcase
end
//----------------------------
 
//wAddSubA_Bx 2:1 input Mux
always @ ( * )
begin
        case (iOperation)
 
        `ADD:           wAddSubA_Ax = ( iChannel_Ax[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Ax } : { 32'b0, iChannel_Ax };
        `SUB:   wAddSubA_Ax = ( iChannel_Ax[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Ax } : { 32'b0, iChannel_Ax };
        `INC,`INCX,`INCY,`INCZ:         wAddSubA_Ax = ( iChannel_Ax[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Ax } : { 32'b0, iChannel_Ax };
        `DEC:           wAddSubA_Ax = ( iChannel_Ax[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Ax } : { 32'b0, iChannel_Ax };
        `MOD:           wAddSubA_Ax = ( iChannel_Bx[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Bx } : { 32'b0, iChannel_Bx };
 
        `MAG:           wAddSubA_Ax = wMultiplicationA_Result;
        `DOT:           wAddSubA_Ax = wMultiplicationA_Result;
        `CROSS: wAddSubA_Ax = wMultiplicationA_Result;
        default:        wAddSubA_Ax = 64'b0;
        endcase
end
//----------------------------
//wAddSubA_Bx 2:1 input Mux
always @ ( * )
begin
        case (iOperation)
        `ADD: wAddSubA_Bx = ( iChannel_Bx[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Bx } : { 32'b0, iChannel_Bx };
        `SUB: wAddSubA_Bx = ( iChannel_Bx[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Bx } : { 32'b0, iChannel_Bx };
        `INC,`INCX: wAddSubA_Bx = (`LONG_WIDTH'd1 << `SCALE);
        `INCY,`INCZ: wAddSubA_Bx = `LONG_WIDTH'd0;
        `DEC: wAddSubA_Bx = (`LONG_WIDTH'd1 << `SCALE);
        `MOD: wAddSubA_Bx = (`LONG_WIDTH'd1 << `SCALE);
 
        `MAG:           wAddSubA_Bx = wMultiplicationB_Result;
        `DOT:           wAddSubA_Bx = wMultiplicationB_Result;
        `CROSS: wAddSubA_Bx = wMultiplicationB_Result;
        default:        wAddSubA_Bx = 64'b0;
        endcase
end
//--------------------------------------------------------------
/*
        Second addtion block instance goes here.
        Note that all inputs/outputs to the block
        are wires. It has two MUXES one for each entry.
*/
 
wire [`LONG_WIDTH-1:0] wAddSubB_Result;
 
 
wire wAddSubB_Operation; //Either addition or substraction
reg  wAddSubB_InputReady;
wire wAddSubB_OutputReady;
 
reg [`LONG_WIDTH-1:0] wAddSubB_Ay,wAddSubB_By;
 
assign wAddSubB_Operation =
        ( iOperation == `SUB
          || iOperation == `CROSS
          || iOperation == `DEC
          || iOperation == `MOD
          ) ? 1 : 0;
 
FixedAddSub AddSubChannel_B
(
.Clock( Clock ),
.Reset( Reset ),
.A( wAddSubB_Ay ),
.B( wAddSubB_By ),
.R( wAddSubB_Result ),
.iOperation( wAddSubB_Operation ),
.iInputReady( wAddSubB_InputReady ),
.OutputReady( wAddSubB_OutputReady )
);
//----------------------------
wire wMultiplicationOutputReadyC_Dealy1;
FFD_POSEDGE_ASYNC_RESET # (1) FFwMultiplicationOutputReadyC_Dealy1
(
        .Clock( Clock ),
        .Clear( Reset ),
        .D( wMultiplicationOutputReadyC ),
        .Q( wMultiplicationOutputReadyC_Dealy1 )
);
 
 
 
 
 
//InpuReady Mux B
always @ ( * )
begin
        case (iOperation)
        `ADD:           wAddSubB_InputReady = iInputReady;
        `SUB:           wAddSubB_InputReady = iInputReady;
        `INC,`INCX,`INCY,`INCZ:         wAddSubB_InputReady = iInputReady;
        `DEC:           wAddSubB_InputReady = iInputReady;
        `MOD:           wAddSubB_InputReady = iInputReady;
 
        `MAG:           wAddSubB_InputReady = wAddSubAOutputReady
                                                                                        && wMultiplicationOutputReadyC_Dealy1;
                                                                                //&& wMultiplicationC_OutputReady;
 
        `DOT:           wAddSubB_InputReady = wAddSubAOutputReady
                                                                                && wMultiplicationOutputReadyC_Dealy1;
                                                                                //&& wMultiplicationC_OutputReady;
 
        `CROSS: wAddSubB_InputReady = wMultiplicationOutputReadyC &&
                                                                                         wMultiplicationOutputReadyD;
                                                                                //      wMultiplicationC_OutputReady
                                                                                //&& wMultiplicationD_OutputReady;
 
        default:        wAddSubB_InputReady = 1'b0;
 
        endcase
end
//----------------------------
// wAddSubB_Ay 2:1 input Mux
// If the iOperation is ADD or SUB, it will simply take the inputs from
// ALU Channels. If it is a VECTOR_MAGNITUDE, it take the input from the
// previus ADDER_A, same for dot product.
always @ ( * )
begin
        case (iOperation)
        `ADD:   wAddSubB_Ay = (iChannel_Ay[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Ay} : {32'b0,iChannel_Ay};            //Ay
        `SUB:   wAddSubB_Ay = (iChannel_Ay[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Ay} : {32'b0,iChannel_Ay};            //Ay
        `INC,`INCX,`INCY,`INCZ:         wAddSubB_Ay = (iChannel_Ay[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Ay} : {32'b0,iChannel_Ay};            //Ay
        `DEC:           wAddSubB_Ay = (iChannel_Ay[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_Ay} : {32'b0,iChannel_Ay};            //Ay
        `MOD:           wAddSubB_Ay = (iChannel_By[31] == 1'b1) ? {32'hFFFFFFFF, iChannel_By} : {32'b0,iChannel_By};            //Ay
        `MAG:           wAddSubB_Ay = wAddSubA_Result;  //A^2+B^2
        `DOT:           wAddSubB_Ay = wAddSubA_Result;   //Ax*Bx + Ay*By
        `CROSS: wAddSubB_Ay     = wMultiplicationC_Result;
        default:        wAddSubB_Ay = 64'b0;
        endcase
end
//----------------------------
//wAddSubB_By 2:1 input Mux
always @ ( * )
begin
        case (iOperation)
        `ADD:   wAddSubB_By = (iChannel_By[31] == 1'b1) ? {32'hFFFFFFFF,iChannel_By } : {32'b0,iChannel_By};                            //By
        `SUB:   wAddSubB_By = (iChannel_By[31] == 1'b1) ? {32'hFFFFFFFF,iChannel_By } : {32'b0,iChannel_By}; //{32'b0,iChannel_By};                             //By
        `INC,`INCY:             wAddSubB_By = (`LONG_WIDTH'd1 << `SCALE);
        `INCX,`INCZ:   wAddSubB_By = `LONG_WIDTH'd0;
        `DEC:           wAddSubB_By = (`LONG_WIDTH'd1 << `SCALE);
        `MOD:           wAddSubB_By = (`LONG_WIDTH'd1 << `SCALE);
        `MAG:           wAddSubB_By = wMultiplicationC_Result;  //C^2
        `DOT:           wAddSubB_By = wMultiplicationC_Result;  //Az * Bz
        `CROSS: wAddSubB_By     = wMultiplicationD_Result;
        default:        wAddSubB_By = 32'b0;
        endcase
end
//--------------------------------------------------------------
wire [`LONG_WIDTH-1:0] wAddSubC_Result;
reg [`LONG_WIDTH-1:0] wAddSubC_Az,wAddSubC_Bz;
 
wire wAddSubC_Operation; //Either addition or substraction
reg wAddSubC_InputReady;
wire wAddSubC_OutputReady;
 
reg [`LONG_WIDTH-1:0] AddSubC_Az,AddSubB_Bz;
 
//-----------------------------------------
always @ ( * )
begin
        case (iOperation)
                `CROSS:         wAddSubC_Az = wMultiplicationE_Result;
                `MOD: wAddSubC_Az = (iChannel_Bz[31] == 1'b1) ? {32'hFFFFFFFF,iChannel_Bz} : {32'b0,iChannel_Bz};
                default:                                wAddSubC_Az = (iChannel_Az[31] == 1'b1) ? {32'hFFFFFFFF,iChannel_Az} : {32'b0,iChannel_Az};
        endcase
end
//-----------------------------------------
always @ ( * )
begin
        case (iOperation)
                `CROSS:         wAddSubC_Bz = wMultiplicationF_Result;
                `INC,`INCZ:             wAddSubC_Bz = (`LONG_WIDTH'd1 << `SCALE);
                `INCX,`INCY:   wAddSubC_Bz = `LONG_WIDTH'd0;
                `DEC:           wAddSubC_Bz = (`LONG_WIDTH'd1 << `SCALE);
                `MOD:           wAddSubC_Bz = (`LONG_WIDTH'd1 << `SCALE);
                default:                                wAddSubC_Bz = (iChannel_Bz[31] == 1'b1) ? {32'hFFFFFFFF,iChannel_Bz} : {32'b0,iChannel_Bz};
        endcase
end
//-----------------------------------------
 
assign wAddSubC_Operation
        = (
                iOperation == `SUB
                || iOperation == `CROSS
                || iOperation == `DEC
                || iOperation == `MOD
                ) ? 1 : 0;
 
FixedAddSub AddSubChannel_C
(
.Clock( Clock ),
.Reset( Reset ),
.A( wAddSubC_Az ),
.B( wAddSubC_Bz ),
.R( wAddSubC_Result ),
.iOperation( wAddSubC_Operation ),
.iInputReady( wAddSubC_InputReady ),
.OutputReady( wAddSubC_OutputReady )
);
 
 
always @ ( * )
begin
        case (iOperation)
        `CROSS: wAddSubC_InputReady = wMultiplicationE_OutputReady &&
                wMultiplicationF_OutputReady;
 
        default: wAddSubC_InputReady = iInputReady;
        endcase
end
 
//------------------------------------------------------
wire [`WIDTH-1:0] wSquareRoot_Result;
wire wSquareRoot_OutputReady;
 
 
FixedPointSquareRoot SQROOT1
(
        .Clock( Clock ),
        .Reset( Reset ),
        .Operand( wAddSubB_Result ),
        .iInputReady( wAddSubBOutputReady && iOperation == `MAG),
        .OutputReady( wSquareRoot_OutputReady ),
        .Result( wSquareRoot_Result )
);
//------------------------------------------------------
 
assign wModulus2N_ResultA =  (iChannel_Ax  & wAddSubA_Result );
assign wModulus2N_ResultB =  (iChannel_Ay  & wAddSubB_Result );
assign wModulus2N_ResultC =  (iChannel_Az  & wAddSubC_Result );
 
 
 
 
 
 
//&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&//
//****Mux for ResultA***
// Notice that the Dot Product or the Magnitud Result will
// output in ResultA.
 
always @ ( *  )
begin
        case ( iOperation )
        `RETURN:                                ResultA = iChannel_Ax;
        `ADD:                                   ResultA = (wAddSubA_Result[63] == 1'b1) ? { 1'b1,wAddSubA_Result[30:0]} : {1'b0,wAddSubA_Result[30:0]};// & 32'h7FFFFFFF;
        `SUB:                                   ResultA = (wAddSubA_Result[63] == 1'b1) ? { 1'b1,wAddSubA_Result[30:0]} : {1'b0,wAddSubA_Result[30:0]};//wAddSubA_Result[31:0];
        `CROSS:                         ResultA = (wAddSubA_Result[63] == 1'b1) ? { 1'b1,wAddSubA_Result[30:0]} : {1'b0,wAddSubA_Result[30:0]};//wAddSubA_Result[31:0];
        `DIV:                                   ResultA = wDivisionA_Result;
        `MUL:                                   ResultA = wMultiplicationA_Result[31:0];
        `IMUL:            ResultA = wMultiplicationA_Result[31:0];
        `DOT:                                   ResultA = (wAddSubB_Result[63] == 1'b1) ? { 1'b1,wAddSubB_Result[30:0]} : {1'b0,wAddSubB_Result[30:0]};//wAddSubB_Result[31:0];
        `MAG:                                   ResultA = wSquareRoot_Result;
        `ZERO:                          ResultA = 32'b0;
        `COPY:                          ResultA = iChannel_Ax;
 
        `SWIZZLE3D: ResultA  = wSwizzleOutputX;
 
        //Set Operations
        `UNSCALE:                       ResultA  = iChannel_Ax >> `SCALE;
        `SETX:                          ResultA  = iChannel_Ax;
        `SETY:                          ResultA  = iChannel_Bx;
        `SETZ:                          ResultA  = iChannel_Bx;
        `INC,`INCX,`INCY,`INCZ:                                 ResultA = (wAddSubA_Result[63] == 1'b1) ? { 1'b1,wAddSubA_Result[30:0]} : {1'b0,wAddSubA_Result[30:0]};
        `DEC:                                   ResultA = (wAddSubA_Result[63] == 1'b1) ? { 1'b1,wAddSubA_Result[30:0]} : {1'b0,wAddSubA_Result[30:0]};
        `MOD:                                   ResultA =  wModulus2N_ResultA;
        `FRAC:                          ResultA = iChannel_Ax & (`WIDTH'hFFFFFFFF >> (`WIDTH - `SCALE));
        `MULP:                     ResultA = iChannel_Ax;
        `NEG:                                   ResultA = ~iChannel_Ax + 1'b1;
        `XCHANGEX:                      ResultA  = iChannel_Bx;
 
        default:
        begin
        `ifdef DEBUG
//      $display("%dns ALU: Error Unknown Operation: %d",$time,iOperation);
//      $stop();
        `endif
        ResultA =  32'b0;
        end
        endcase
end
//------------------------------------------------------
//****Mux for RB***
always @ ( * )
begin
        case ( iOperation )
        `RETURN:                                ResultB = iChannel_Ax;
        `ADD:                                   ResultB = (wAddSubB_Result[63] == 1'b1) ? {1'b1,wAddSubB_Result[30:0]} : {1'b0,wAddSubB_Result[30:0]}; // & 32'h7FFFFFFF;
        `SUB:                                   ResultB = (wAddSubB_Result[63] == 1'b1) ? {1'b1,wAddSubB_Result[30:0]} : {1'b0,wAddSubB_Result[30:0]}; //wAddSubB_Result[31:0];
        `CROSS:                         ResultB = (wAddSubB_Result[63] == 1'b1) ? {1'b1,wAddSubB_Result[30:0]} : {1'b0,wAddSubB_Result[30:0]};//wAddSubB_Result[31:0];
        `DIV:                                   ResultB = wDivisionB_Result;
        `MUL:                                   ResultB = wMultiplicationB_Result[31:0];
        `IMUL:            ResultB = wMultiplicationB_Result[31:0];
        `DOT:                                   ResultB = (wAddSubB_Result[63] == 1'b1) ? {1'b1,wAddSubB_Result[30:0]} : {1'b0,wAddSubB_Result[30:0]};//wAddSubB_Result[31:0];
        `MAG:                                   ResultB = wSquareRoot_Result;
        `ZERO:                          ResultB = 32'b0;
        `COPY:                          ResultB = iChannel_Ay;
 
        //Set Operations
        `UNSCALE:                       ResultB  = iChannel_Ay >> `SCALE;
        `SETX:                          ResultB  = iChannel_By;         // {Source1[95:64],Source0[63:32],Source0[31:0]}; 
        `SETY:                          ResultB  = iChannel_Ax;         // {Source0[95:64],Source1[95:64],Source0[31:0]}; 
        `SETZ:                          ResultB  = iChannel_By;  // {Source0[95:64],Source0[63:32],Source1[95:64]}; 
 
        `SWIZZLE3D:             ResultB  = wSwizzleOutputY;
 
        `INC,`INCX,`INCY,`INCZ:                                 ResultB = (wAddSubB_Result[63] == 1'b1) ? {1'b1,wAddSubB_Result[30:0]} : {1'b0,wAddSubB_Result[30:0]}; // & 32'h7FFFFFFF;
        `DEC:                                   ResultB = (wAddSubB_Result[63] == 1'b1) ? {1'b1,wAddSubB_Result[30:0]} : {1'b0,wAddSubB_Result[30:0]}; // & 32'h7FFFFFFF;
        `MOD:                                   ResultB =  wModulus2N_ResultB;
        `FRAC:                          ResultB = iChannel_Ay & (`WIDTH'hFFFFFFFF >> (`WIDTH - `SCALE));
        `MULP:                          ResultB = iChannel_Ay;
        `NEG:                                   ResultB = ~iChannel_Ay + 1'b1;
        `XCHANGEX:                      ResultB = iChannel_Ay;
 
        default:
        begin
        `ifdef DEBUG
        //$display("%dns ALU: Error Unknown Operation: %d",$time,iOperation);
        //$stop();
        `endif
        ResultB =  32'b0;
        end
        endcase
end
//------------------------------------------------------
//****Mux for RC***
always @ ( * )
begin
        case ( iOperation )
        `RETURN:                                ResultC = iChannel_Ax;
        `ADD:                                   ResultC = (wAddSubC_Result[63] == 1'b1) ? {1'b1,wAddSubC_Result[30:0]} : {1'b0,wAddSubC_Result[30:0]}; //wAddSubC_Result[31:0];// & 32'h7FFFFFFF;
        `SUB:                                   ResultC = (wAddSubC_Result[63] == 1'b1) ? {1'b1,wAddSubC_Result[30:0]} : {1'b0,wAddSubC_Result[30:0]}; //wAddSubC_Result[31:0];
        `CROSS:                         ResultC = (wAddSubC_Result[63] == 1'b1) ? {1'b1,wAddSubC_Result[30:0]} : {1'b0,wAddSubC_Result[30:0]};//wAddSubC_Result[31:0];
        `DIV:                                   ResultC = wDivisionC_Result;
        `MUL:                                   ResultC = wMultiplicationC_Result[31:0];
        `IMUL:            ResultC = wMultiplicationC_Result[31:0];
        `DOT:                                   ResultC = (wAddSubB_Result[63] == 1'b1) ? {1'b1,wAddSubB_Result[30:0]} : {1'b0,wAddSubB_Result[30:0]};//wAddSubB_Result[31:0];
        `MAG:                                   ResultC = wSquareRoot_Result;
        `ZERO:                          ResultC = 32'b0;
        `COPY:                          ResultC = iChannel_Az;
 
        `SWIZZLE3D: ResultC  = wSwizzleOutputZ;
 
        //Set Operations
        `UNSCALE:                       ResultC  = iChannel_Az >> `SCALE;
        `SETX:                          ResultC  = iChannel_Bz;         // {Source1[95:64],Source0[63:32],Source0[31:0]}; 
        `SETY:                          ResultC  = iChannel_Bz;         // {Source0[95:64],Source1[95:64],Source0[31:0]}; 
        `SETZ:                          ResultC  = iChannel_Ax;  // {Source0[95:64],Source0[63:32],Source1[95:64]}; 
 
        `INC,`INCX,`INCY,`INCZ:                                 ResultC = (wAddSubC_Result[63] == 1'b1) ? {1'b1,wAddSubC_Result[30:0]} : {1'b0,wAddSubC_Result[30:0]}; //wAddSubC_Result[31:0];// & 32'h7FFFFFFF;
        `DEC:                                   ResultC = (wAddSubC_Result[63] == 1'b1) ? {1'b1,wAddSubC_Result[30:0]} : {1'b0,wAddSubC_Result[30:0]}; //wAddSubC_Result[31:0];// & 32'h7FFFFFFF;
        `MOD:                                   ResultC =  wModulus2N_ResultC;
        `FRAC:                          ResultC = iChannel_Az & (`WIDTH'hFFFFFFFF >> (`WIDTH - `SCALE));
        `MULP:                          ResultC = wMultiplicationA_Result[31:0];
        `NEG:                                   ResultC = ~iChannel_Az + 1'b1;
        `XCHANGEX:                      ResultC = iChannel_Az;
        default:
        begin
        `ifdef DEBUG
        //$display("%dns ALU: Error Unknown Operation: %d",$time,iOperation);
        //$stop();
        `endif
        ResultC =  32'b0;
        end
        endcase
end
//------------------------------------------------------------------------
 
 
always @ ( * )
begin
        case (iOperation)
        `JMP: oBranchTaken = 1;
        `JGX:   oBranchTaken = wArithmeticComparison_Result;
        `JGY:   oBranchTaken = wArithmeticComparison_Result;
        `JGZ:   oBranchTaken = wArithmeticComparison_Result;
 
        `JLX:   oBranchTaken = wArithmeticComparison_Result;
        `JLY:   oBranchTaken = wArithmeticComparison_Result;
        `JLZ:   oBranchTaken = wArithmeticComparison_Result;
 
        `JEQX:  oBranchTaken = wArithmeticComparison_Result;
        `JEQY:  oBranchTaken = wArithmeticComparison_Result;
        `JEQZ:  oBranchTaken = wArithmeticComparison_Result;
 
        `JNEX:  oBranchTaken = wArithmeticComparison_Result;
        `JNEY:  oBranchTaken = wArithmeticComparison_Result;
        `JNEZ:  oBranchTaken = wArithmeticComparison_Result;
 
        `JGEX:  oBranchTaken = wArithmeticComparison_Result;
        `JGEY:  oBranchTaken = wArithmeticComparison_Result;
        `JGEZ:  oBranchTaken = wArithmeticComparison_Result;
 
        `JLEX:  oBranchTaken = wArithmeticComparison_Result;
        `JLEY:  oBranchTaken = wArithmeticComparison_Result;
        `JLEZ:  oBranchTaken = wArithmeticComparison_Result;
 
        default: oBranchTaken = 0;
        endcase
 
end
 
always @ ( * )
begin
        case (iOperation)
 
                `JMP,`JGX,`JGY,`JGZ,`JLX,`JLY,`JLZ,`JEQX,`JEQY,`JEQZ,
                `JNEX,`JNEY,`JNEZ,`JGEX,`JGEY,`JGEZ: oBranchNotTaken = !oBranchTaken && OutputReady;
                `JLEX: oBranchNotTaken = !oBranchTaken && OutputReady;
                `JLEY: oBranchNotTaken = !oBranchTaken && OutputReady;
                `JLEZ: oBranchNotTaken = !oBranchTaken && OutputReady;
        default:
                oBranchNotTaken = 0;
        endcase
end
//------------------------------------------------------------------------
//Output ready logic Stuff for Division...
//Some FFT will hopefully do the trick
 
wire wDivisionOutputReadyA,wDivisionOutputReadyB,wDivisionOutputReadyC;
wire wDivisionOutputReady;
 
 
assign wAddSubAOutputReady = wAddSubA_OutputReady;
assign wAddSubBOutputReady = wAddSubB_OutputReady;
assign wAddSubCOutputReady = wAddSubC_OutputReady;
 
 
FFT1 FFT_DivisionA
  (
   .D(1'b1),
   .Clock( wDivisionA_OutputReady ),
   .Reset( iInputReady ),
   .Q( wDivisionOutputReadyA )
 );
 
FFT1 FFT_DivisionB
  (
   .D(1'b1),
   .Clock( wDivisionB_OutputReady ),
   .Reset( iInputReady ),
   .Q( wDivisionOutputReadyB )
 );
 
 FFT1 FFT_DivisionC
  (
   .D(1'b1),
   .Clock( wDivisionC_OutputReady ),
   .Reset( iInputReady ),
   .Q( wDivisionOutputReadyC )
 );
 
 assign wDivisionOutputReady =
 ( wDivisionOutputReadyA && wDivisionOutputReadyB && wDivisionOutputReadyC );
 
assign wMultiplicationOutputReadyA = wMultiplicationA_OutputReady;
assign wMultiplicationOutputReadyB = wMultiplicationB_OutputReady;
assign wMultiplicationOutputReadyC = wMultiplicationC_OutputReady;
assign wMultiplicationOutputReadyD = wMultiplicationD_OutputReady;
 
 assign wMultiplicationOutputReady =
 ( wMultiplicationOutputReadyA && wMultiplicationOutputReadyB && wMultiplicationOutputReadyC );
 
 wire wSquareRootOutputReady;
 FFT1 FFT_Sqrt
  (
   .D(1'b1),
   .Clock( wSquareRoot_OutputReady ),
   .Reset( iInputReady ),
   .Q( wSquareRootOutputReady )
 );
 
 
//------------------------------------------------------------------------
wire wOutputDelay1Cycle;
 
 
FFD_POSEDGE_ASYNC_RESET # (1) FFOutputReadyDelay2
(
        .Clock( Clock ),
        .Clear( Reset ),
        .D( iInputReady ),
        .Q( wOutputDelay1Cycle )
);
 
 
 
//Mux for output ready signal
always @ ( * )
begin
        case ( iOperation )
        `UNSCALE:                       OutputReady  = wOutputDelay1Cycle;
        `RETURN: OutputReady = wOutputDelay1Cycle;
 
        `NOP: OutputReady = wOutputDelay1Cycle;
        `FRAC: OutputReady = wOutputDelay1Cycle;
        `NEG: OutputReady = wOutputDelay1Cycle;
 
        `ifdef DEBUG
        //Debug Print behaves as a NOP in terms of ALU...
        `DEBUG_PRINT: OutputReady = wOutputDelay1Cycle;
        `endif
 
        `ADD,`INC,`INCX,`INCY,`INCZ:            OutputReady =   wAddSubAOutputReady &&
                                                                        wAddSubBOutputReady &&
                                                                        wAddSubCOutputReady;
 
        `SUB,`DEC:              OutputReady =   wAddSubAOutputReady &&
                                                                        wAddSubBOutputReady &&
                                                                        wAddSubCOutputReady;
 
        `DIV:           OutputReady =   wDivisionOutputReady;
 
 
        `MUL,`IMUL:     OutputReady =   wMultiplicationOutputReady;
        `MULP:  OutputReady =  wMultiplicationOutputReadyA;
 
        `DOT:           OutputReady = wAddSubBOutputReady;
 
        `CROSS: OutputReady =   wAddSubAOutputReady &&
                                                                        wAddSubBOutputReady &&
                                                                        wAddSubCOutputReady;
 
        `MAG:           OutputReady = wSquareRootOutputReady;
 
        `ZERO:  OutputReady = wOutputDelay1Cycle;
 
        `COPY:  OutputReady = wOutputDelay1Cycle;
 
        `SWIZZLE3D: OutputReady = wOutputDelay1Cycle;
 
        `SETX,`SETY,`SETZ,`JMP:         OutputReady = wOutputDelay1Cycle;
 
 
        `JGX,`JGY,`JGZ:                         OutputReady = ArithmeticComparison_OutputReady;
        `JLX,`JLY,`JLZ:                         OutputReady = ArithmeticComparison_OutputReady;
        `JEQX,`JEQY,`JEQZ:                      OutputReady = ArithmeticComparison_OutputReady;
        `JNEX,`JNEY,`JNEZ:                      OutputReady = ArithmeticComparison_OutputReady;
        `JGEX,`JGEY,`JGEZ:                      OutputReady = ArithmeticComparison_OutputReady;
        `JLEX,`JLEY,`JLEZ:                      OutputReady = ArithmeticComparison_OutputReady;
 
        `MOD: OutputReady = wAddSubAOutputReady &&                              //TODO: wait 1 more cycle
                                                                        wAddSubBOutputReady &&
                                                                        wAddSubCOutputReady;
 
        `XCHANGEX: OutputReady = wOutputDelay1Cycle;
 
 
        default:
        begin
                OutputReady =  32'b0;
        end
 
        endcase
end
 
endmodule
//------------------------------------------------------------------------
Browse

Tools

Subversion Repositories theia_gpu

[/] [theia_gpu/] [branches/] [beta_1.1/] [rtl/] [EXE/] [Module_VectorALU.v] - Blame information for rev 200

Line No.	Rev	Author	Line
1	25	diegovalve	`timescale 1ns / 1ps
2			`include "aDefinitions.v"
3			`/**********************************************************************************`
4			`Theia, Ray Cast Programable graphic Processing Unit.`
5			`Copyright (C) 2010 Diego Valverde (diego.valverde.g@gmail.com)`
6
7			`This program is free software; you can redistribute it and/or`
8			`modify it under the terms of the GNU General Public License`
9			`as published by the Free Software Foundation; either version 2`
10			`of the License, or (at your option) any later version.`
11
12			`This program is distributed in the hope that it will be useful,`
13			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
14			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
15			`GNU General Public License for more details.`
16
17			`You should have received a copy of the GNU General Public License`
18			`along with this program; if not, write to the Free Software`
19			`Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.`
20
21			`***********************************************************************************/`
22
23
24
25			`//--------------------------------------------------------------`
26			`module VectorALU`
27			`(`
28			`input wire Clock,`
29			`input wire Reset,`
30			input wire[`INSTRUCTION_OP_LENGTH-1:0] iOperation,
31			input wire[`WIDTH-1:0] iChannel_Ax,
32			input wire[`WIDTH-1:0] iChannel_Bx,
33			input wire[`WIDTH-1:0] iChannel_Ay,
34			input wire[`WIDTH-1:0] iChannel_By,
35			input wire[`WIDTH-1:0] iChannel_Az,
36			input wire[`WIDTH-1:0] iChannel_Bz,
37			output wire [`WIDTH-1:0] oResultA,
38			output wire [`WIDTH-1:0] oResultB,
39			output wire [`WIDTH-1:0] oResultC,
40			`input wire iInputReady,`