Subversion Repositories theia_gpu

/**********************************************************************************

Theia, Ray Cast Programable graphic Processing Unit.

Copyright (C) 2010  Diego Valverde (diego.valverde.g@gmail.com)

This program is free software; you can redistribute it and/or

modify it under the terms of the GNU General Public License

as published by the Free Software Foundation; either version 2

of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program; if not, write to the Free Software

Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.

***********************************************************************************/

/*******************************************************************************

Module Description:

This is the Main test bench of the GPU. It simulates the behavior of

an external control unit or CPU that sends configuration information into DUT.

It also implements a second processs that simulates a Wishbone slave that sends

data from an external memory. These blocks are just behavioral CTE and therefore

are not meant to be synthethized.

*******************************************************************************/

`timescale 1ns / 1ps

`include "aDefinitions.v"

`define CONFIGURATION_PHASE                                             0

`define CTE_INITIAL_STATE                                                       0

`define CTE_IDLE                                                                                1

`define CTE_START_EU_CONFIGURATION_SEQUENCE     2

`define CTE_SEND_CONFIGURATION_PACKET                   3

`define CTE_ACK_CONFIGURATION_PACKET                    8

`define CTE_SEND_LIGHT_PACKET                                           13

`define CTE_ACK_LIGTH_PACKET                                            14

`define CTE_SEND_RAY_I_TASK                                             15

`define CTE_WAIT_FOR_TASK_ACK                                           16

`define WAIT_FOR_TASK_COMPLETE                                  17

`define CTE_PREPARE_NEW_TASK                                            18

`define CTE_RENDER_DONE                                                         19

`define CTE_READ_COLOR_DATA                                             20

`define CTE_GRANT_BUS_WRITE_PERMISION                   21

`define CTE_ACK_GRANT_BUS_PERMISION                             22

`define CTE_ACK_READ_COLOR_DATA                                 23

`define CTE_SEND_TEXTURE_DIMENSIONS                             24

`define CTE_ACK_TEXTURE_DIMENSIONS                              25

`define RESOLUTION_WIDTH                                                        (rSceneParameters[12] >> `SCALE)

`define RESOLUTION_HEIGHT                                                       (rSceneParameters[13] >> `SCALE)

`define RAYI_TASK                                                                               1

`define DELTA_ROW                                                                       (32'h1 << `SCALE)

`define DELTA_COL                                                                       (32'h1 << `SCALE)

`define SELECT_ALL_CORES `MAX_CORES'b1111;

module TestBench_Theia;

        //------------------------------------------------------------------------

        //**WARNING: Declare all of your varaibles at the begining

        //of the file. I hve noticed that sometimes the verilog

        //simulator allows you to use some regs even if they have not been 

        //previously declared, leadeing to crahses or unexpected behavior

        // Inputs

        reg Clock;

        reg Reset;

        reg ExternalBus_DataReady;

        // Outputs

        wire ExternalBus_Acknowledge;

        wire TaskCompleted;

        //CTE state machin logic

        reg[31:0] CurrentState,NextState;

        reg[3:0]  LightCount;

        reg[31:0] rLaneA,rLaneB,rLaneC,rLaneD;

        reg[16:0] CurrentTaskId;

        reg[31:0] CurrentPixelRow, CurrentPixelCol,CurrentRayType;

        reg CTE_WriteEnable;

        wire [`WB_WIDTH-1:0] DAT_O;

        reg                                             ACK_O;

        wire                                            ACK_I;

        wire [`WB_WIDTH-1:0] ADR_I,ADR_O;

        wire                                            WE_I,STB_I;

        reg CYC_O,WE_O,TGC_O,STB_O;

        wire [1:0] TGC_I;

        reg [1:0] TGA_O;

        wire [1:0] TGA_I;

        wire [31:0] DAT_I;

        integer ucode_file;

        reg [31:0] rInitialCol,rInitialRow;

        reg [31:0]       rControlRegister[2:0];

        integer file, log, r, a, b;

        reg [31:0]  rSceneParameters[64:0];

        reg [31:0]       rVertexBuffer[6000:0];

        reg [31:0]       rInstructionBuffer[512:0];

        `define TEXTURE_BUFFER_SIZE (256*256*3)

        reg [31:0]  rTextures[`TEXTURE_BUFFER_SIZE:0];            //Lets asume we use 256*256 textures

        integer i,j;

        `define MAX_WIDTH 200

        `define MAX_SCREENBUFFER (`MAX_WIDTH*`MAX_WIDTH*3)

        reg [7:0] rScreen[`MAX_SCREENBUFFER-1:0];

        //------------------------------------------------------------------------

        //Debug registers

        `define TASK_TIMEOUTMAX 150000//50000

        //------------------------------------------------------------------------

                reg MST_O;

//---------------------------------------------------------------       

reg rIncCoreSelect;

wire [`MAX_CORES-1:0] wCoreSelect;

CIRCULAR_SHIFTLEFT_POSEDGE_EX # (`MAX_CORES ) SHF1

(

        .Clock( Clock ),

        .Reset( Reset ),

        .Initial(`MAX_CORES'b1),

        .Enable(rIncCoreSelect),

        .O(wCoreSelect)

);

wire [3:0] CYC_I,GNT_O;

wire wDone;

reg [`MAX_CORES-1:0] rCoreSelectMask,rRenderEnable;

THEIA GPU

                (

                .CLK_I( Clock ),

                .RST_I( Reset ),

                .RENDREN_I( rRenderEnable ),

                .DAT_I( DAT_O ),

                .ADR_O( ADR_I ),

                .ACK_I( ACK_O ),

                .WE_O ( WE_I ),

                .STB_O( STB_I ),

                .CYC_I( CYC_O ),

                .TGC_O( TGC_I ),

                .MST_I( MST_O ),

                .TGA_I( TGA_O ),

                .ACK_O( ACK_I ),

                .ADR_I( ADR_O ),

                .DAT_O( DAT_I ),

                .WE_I(  WE_O  ),

                .SEL_I( wCoreSelect | rCoreSelectMask),//4'b0001 ),

                .STB_I( STB_O ),

                .TGA_O(TGA_I),

                //Control register

                .CREG_I( rControlRegister[0][15:0] ),

                //Other stuff

                .DONE_O( wDone )

        );

        //---------------------------------------------

        //generate the clock signal here

        always begin

                #`CLOCK_CYCLE  Clock =  ! Clock;

        end

        //---------------------------------------------

reg [15:0] rTimeOut;

                `define MAX_INSTRUCTIONS 2

        initial begin

                // Initialize Inputs

                Clock                                   = 0;

                Reset                                   = 0;

                CTE_WriteEnable                 = 0;

                rLaneA                                  = 32'b0;

                rLaneB                                  = 32'b0;

                rLaneC                                  = 32'b0;

                rLaneD                                  = 32'b0;

                ExternalBus_DataReady = 0;

                rTimeOut              = 0;

        `ifdef DUMP_CODE

                $write("Opening TestBench.log.... ");

                ucode_file = $fopen("TestBench.log","w");

                $display("Done");

        `endif

                //Read Config register values

                $write("Loading control register.... ");

                $readmemh("Creg.mem",rControlRegister);

                $display("Done");

                //Read configuration Data

                $write("Loading scene parameters.... ");

                $readmemh("Params.mem", rSceneParameters        );

                $display("Done");

                rInitialRow = rSceneParameters[18];

                rInitialCol = rSceneParameters[19];

                //Read Scene Data

                $write("Loading scene geometry.... ");

                $readmemh("Vertex.mem",rVertexBuffer);

                $display("Done");

                //Read Texture Data

                $write("Loading scene texture.... ");

                $readmemh("Textures.mem",rTextures);

                $display("Done");

                //Read instruction data

                $write("Loading code allocation table and user shaders.... ");

                $readmemh("Instructions.mem",rInstructionBuffer);

                $display("Done");

                $display("Control Register : %b",rControlRegister[0]);

                $display("Initial Row      : %h",rInitialRow);

                $display("Initial Column   : %h",rInitialCol);

                $display("Resolution       : %d X %d",`RESOLUTION_WIDTH, `RESOLUTION_HEIGHT );

                //Open output file

                file = $fopen("Output.ppm");

                log  = $fopen("Simulation.log");

                $fwrite(log, "Simulation start time : %dns\n",$time);

                $fwrite(log, "Width : %d\n",`RESOLUTION_WIDTH);

                $fwrite(log, "Height : %d\n",`RESOLUTION_HEIGHT);

                $fwrite(file,"P3\n");

                $fwrite(file,"#This file was generated by Theia's RTL simulation\n");

                $fwrite(file,"%d %d\n",`RESOLUTION_WIDTH, `RESOLUTION_HEIGHT );

                $fwrite(file,"255\n");

                CurrentPixelRow = 0;

                CurrentPixelCol = 0;

                #10

                Reset = 1;

                ExternalBus_DataReady = 0;

                // Wait 100 ns for global reset to finish

                #100  Reset = 0;

        end

        reg [5:0] DataIndex;

        reg [31:0] ConfigurationPacketSize;

        reg [7:0] R,G,B;

//---------------------------------------------

always @ (posedge Clock)

begin

        rTimeOut = rTimeOut+1'b1;

        if (rTimeOut > `TASK_TIMEOUTMAX)

        begin

                 $display("%dns ERROR: THEIA Timed out after %d of inactivity\n",

                 $time(),rTimeOut);

                 $stop();

        end

end

reg [31:0] rSlaveData_O;

//reg [31:0] rOutputFrameBuffer[39000:0];

reg [31:0] rColor;

reg [7:0] Thingy;

//Wish-Bone Slave logic.

//

//This logic represents a WBS FSM. It will provide

//the memory for Vertex and Texture data.

//Vertex/Tetxure data is stored in a 4GB RAM.

//Vertex data starts at address 0 and ends at address 0x80_000_000.

//Texture data starts at address 0x80_000_000 and ends at address

//0xFFFFFFFF.

//The Bit 31, indcates wheather we look for vertex (b=0)

//or texture (b=1)

`define WBS_AFTER_RESET                                 0

`define WBS_MOINTOR_STB_I                               1

`define WBS_ACK_O                                                       2

`define WBS_MOINTOR_STB_I_NEG                   3

`define WBS_DONE                    4

        reg [7:0]                        WBSCurrentState,WBSNextState;

        reg [31:0]                       rAddress;

        always @(negedge Clock)

        begin

        if( Reset!=1 )

           WBSCurrentState = WBSNextState;

                  else

                          WBSCurrentState = `WBS_AFTER_RESET;

        end

        reg [31:0] rConvertedTextureAddress;

        //----------------------------------------------------------    

        always @(posedge Clock)

        begin

                case (WBSCurrentState)

                //----------------------------------------

                `WBS_AFTER_RESET:

                begin

                        ACK_O = 0;

                        rSlaveData_O = 32'b0;

                        WBSNextState = `WBS_MOINTOR_STB_I;

                end

                //----------------------------------------

                `WBS_MOINTOR_STB_I:

                begin

                                if ( STB_I == 1 && wDone == 0)

                                WBSNextState = `WBS_ACK_O;

                        else if (STB_I == 0 && wDone == 0)

                                WBSNextState = `WBS_MOINTOR_STB_I;

                        else

                                WBSNextState = `WBS_DONE;

                end

                //----------------------------------------

                `WBS_ACK_O:

                begin

                        if (WE_I == 0)

                        begin

                                rAddress = ADR_I;

                                if (TGA_I == 2'b01) //replace this by TGA_I

                                begin

                                 //Multiply pithc (3), Add 2 because the first 2 bytes are text Width, Height

                                rConvertedTextureAddress = {1'b0,rAddress[30:0]} + 2;

                                if (rConvertedTextureAddress >= `TEXTURE_BUFFER_SIZE)

                                        rConvertedTextureAddress = `TEXTURE_BUFFER_SIZE-1;

                                        rSlaveData_O = rTextures[  rConvertedTextureAddress ];

                                        `ifdef DEBUG_WBM

                                        `LOGME"WB SLAVE: MASTER Requested read from texture address: %h (%d)Data = %h \n",rAddress, rConvertedTextureAddress,DAT_O );

                                        `endif

                                end

                                else

                                begin

                        //              Thingy = 0;  //THIS IS NOT RE-ENTRANT!!!

                                        rSlaveData_O = rVertexBuffer[ rAddress ];

                                        `ifdef DEBUG_WBM

                                        `LOGME"WB SLAVE: MASTER Requested read from vertex address: %h Data = %h\n",rAddress,DAT_O);

                                        `endif

                                end

                        end

                        else

                        begin

                        //      $display("%d Theia Writes value: %h @ %d (Time to process pixel %d Clock cycle)",$time, DAT_I,ADR_I,rTimeOut);

                //      if (Thingy == 0)

                //      begin

                //      end     

                //      Thingy = Thingy + 1;

                        if (CurrentPixelCol >=  (`RESOLUTION_WIDTH*3))

                        begin

                                CurrentPixelCol = 0;

                                CurrentPixelRow = CurrentPixelRow + 1;

                                $display("]- %d (%d)",CurrentPixelRow,ADR_I);

                                $write("[");

                        end

                //      if (Thingy == 3)

                //      begin

                                CurrentPixelCol = CurrentPixelCol + 1;

                                if ( CurrentPixelCol % 3  == 0)

                                begin

                        //      $fwrite(file,"\n# %d %d\n",CurrentPixelRow,CurrentPixelCol);

                                $write(".");

                                end

                                //Thingy = 0;

                //      end     

                                rTimeOut = 0;

                                R = ((DAT_I >> (`SCALE-8)) > 255) ? 255 : (DAT_I >>  (`SCALE-8));

                                rScreen[ ADR_I ] = R;

                        //      $fwrite(file,"%d " , R );

                        end

                        ACK_O = 1;

                //      if (CurrentPixelRow >= `RESOLUTION_HEIGHT)

                if (wDone)

                                WBSNextState = `WBS_DONE;

                        else

                                WBSNextState = `WBS_MOINTOR_STB_I_NEG;

                end

                //----------------------------------------

                `WBS_MOINTOR_STB_I_NEG:

                begin

                        if ( STB_I == 0 )

                        begin

                                ACK_O = 0;

                                WBSNextState = `WBS_MOINTOR_STB_I;

                        end

                        else

                                WBSNextState = `WBS_MOINTOR_STB_I_NEG;

                end

                //----------------------------------------

                `WBS_DONE:

                begin

                for (j = 0; j < `RESOLUTION_WIDTH; j = j+1)

                begin

                        for (i = 0; i < `RESOLUTION_HEIGHT*3; i = i +1)

                        begin

                        $fwrite(file,"%d " , rScreen[i+j*`RESOLUTION_WIDTH*3] );

                                if ((i %3) == 0)

                                                $fwrite(file,"\n# %d %d\n",i,j);

                        end

                end

                $display("RESOLUTION_WIDTH = %d,RESOLUTION_HEIGHT= %d",

                `RESOLUTION_WIDTH,`RESOLUTION_HEIGHT);

                $display("ADR_I = %d\n",ADR_I);

                        `LOGME"RENDER COMPLETE");

                        `LOGME"Closing File");

                        $fclose(file);

                        $fwrite(log, "Simulation end time : %dns\n",$time);

                        $fclose(log);

                        `LOGME"File Closed");

                        $stop();

                        $fclose(ucode_file);

                end

                //----------------------------------------

                default:

                begin

                $display("WBS Undefined state");

                end

                endcase

        end     //end always

        //----------------------------------------------------------    

`define TAG_BLOCK_WRITE_CYCLE    2'b01

`define TAG_INSTRUCTION_ADDRESS_TYPE 2'b01

`define TAG_DATA_ADDRESS_TYPE        2'b10

`define WBM_AFTER_RESET                                                 0

`define WBM_WRITE_INSTRUCTION_PHASE1            1

`define WBM_ACK_INSTRUCTION_PHASE1                      2

`define WBM_WRITE_INSTRUCTION_PHASE2            3

`define WBM_ACK_INSTRUCTION_PHASE2                      4

`define WBM_END_INSTRUCTION_WRITE_CYCLE   5

`define WBM_SEND_DATA_PHASE1                          6

`define WBM_ACK_DATA_PHASE1                           7

`define WBM_SEND_DATA_PHASE2                          8

`define WBM_ACK_DATA_PHASE2                           9

`define WBM_SEND_DATA_PHASE3                          10

`define WBM_ACK_DATA_PHASE3                           11

`define WBM_END_DATA_WRITE_CYCLE          12

`define WBM_DONE                          13

`define WBM_CONFIGURE_CORE0_PHASE1        14

`define WBM_ACK_CONFIGURE_CORE0_PHASE1    15

`define WBM_CONFIGURE_CORE0_PHASE2        16

`define WBM_ACK_CONFIGURE_CORE0_PHASE2    17

`define WBM_CONFIGURE_CORE0_PHASE3        18

`define WBM_ACK_CONFIGURE_CORE0_PHASE3    19

`define WBM_CONFIGURE_CORE1_PHASE1        20

`define WBM_ACK_CONFIGURE_CORE1_PHASE1    21

`define WBM_CONFIGURE_CORE1_PHASE2        22

`define WBM_ACK_CONFIGURE_CORE1_PHASE2    23

`define WBM_CONFIGURE_CORE1_PHASE3        24

`define WBM_ACK_CONFIGURE_CORE1_PHASE3    25

`define WBM_END_CORE0_WRITE_CYCLE         26

`define WBM_END_CORE1_WRITE_CYCLE         27

`define WBM_CONFIGURE_CORE2_PHASE1        28

`define WBM_ACK_CONFIGURE_CORE2_PHASE1    29

`define WBM_CONFIGURE_CORE2_PHASE2        30

`define WBM_ACK_CONFIGURE_CORE2_PHASE2    31

`define WBM_CONFIGURE_CORE2_PHASE3        32

`define WBM_ACK_CONFIGURE_CORE2_PHASE3    33

`define WBM_CONFIGURE_CORE3_PHASE1        34

`define WBM_ACK_CONFIGURE_CORE3_PHASE1    35

`define WBM_CONFIGURE_CORE3_PHASE2        36

`define WBM_ACK_CONFIGURE_CORE3_PHASE2    37

`define WBM_CONFIGURE_CORE3_PHASE3        38

`define WBM_ACK_CONFIGURE_CORE3_PHASE3    39

`define WBM_END_CORE2_WRITE_CYCLE         40

`define WBM_END_CORE3_WRITE_CYCLE         41

`define WBM_CONFIGURE_NEXT_CORE           42

reg[31:0] rInstructionPointer;

reg[31:0] rAddressToSend;

reg[31:0] rDataAddress;

reg[31:0] rDataPointer;

reg IncIP,IncIA,IncDP;

reg rPrepateWriteAddressForNextCore;

reg rClearOutAddress;

//-----------------------------------------------------

always @ (posedge Clock or posedge rClearOutAddress)

begin

        if ( IncIA && ~rClearOutAddress)

                rAddressToSend = rAddressToSend + 1;

        else if (rClearOutAddress)

        begin

                if (TGA_O == `TAG_INSTRUCTION_ADDRESS_TYPE)

                        rAddressToSend =  {16'd1,16'd0};

                else if (rPrepateWriteAddressForNextCore)

                        rAddressToSend = `CREG_PIXEL_2D_INITIAL_POSITION;

                else

                        rAddressToSend = 0;

        end

end

//-----------------------------------------------------

always @ (posedge ACK_I or posedge Reset )

begin

        if ( ACK_I && ~Reset)

                rInstructionPointer = rInstructionPointer + 1;

        else if (Reset)

                rInstructionPointer = 0;

end

//-----------------------------------------------------

reg rResetDp;

always @ (posedge Clock or posedge rResetDp )

begin

        if ( ACK_I && ~rResetDp)//IncDP && ~Reset)

                rDataPointer = rDataPointer + 1;

        else if (rResetDp)

                rDataPointer =  32'b0;

end

reg rIncPacketCount;

reg [`WIDTH-1:0] rPacketCount;

always @ (posedge Clock)

begin

        if (Reset)

                rPacketCount = 0;

        else

        begin

                if ( rIncPacketCount )

                        rPacketCount = rPacketCount + 1;

        end

end

//-----------------------------------------------------

assign DAT_O = ( MST_O == 1'b1 ) ? wMasteData_O : rSlaveData_O;

wire[31:0] wMasteData_O;

assign wMasteData_O = (TGA_O == `TAG_INSTRUCTION_ADDRESS_TYPE) ? rInstructionBuffer[rInstructionPointer+1] : rSceneParameters[ rDataPointer  ];

always @ (posedge STB_O)

begin

        if (TGA_O == `TAG_INSTRUCTION_ADDRESS_TYPE)

        begin

                //$display("-- %x\n",wMasteData_O);

        end

end

assign ADR_O = rAddressToSend;

        reg [7:0]                        WBMCurrentState,WBMNextState;

        reg [31:0]                       rWriteAddress;

        always @(posedge Clock or posedge Reset)

        begin

        if( Reset!=1 )

           WBMCurrentState = WBMNextState;

                  else

                          WBMCurrentState = `WBM_AFTER_RESET;

        end

                wire[31:0] wConfigurationPacketSize;

                assign wConfigurationPacketSize = rSceneParameters[2];

   reg [31:0]  InstructionIndex;

        reg [31:0]  InstructionWriteAddress;

        //Send the instructions now...

        //----------------------------------------------------------    

        always @(posedge Clock)

        begin

                case (WBMCurrentState)

                //----------------------------------------

                //Wait until the reset secuence is complete to

                //begin sending stuff.

                `WBM_AFTER_RESET:

                begin

                        WE_O <=  0;

                        CYC_O <= 0;

                        TGC_O <= 0;

                        TGA_O <= `TAG_INSTRUCTION_ADDRESS_TYPE;

                        STB_O <= 0;

                //      IncIP <= 0;

                        IncIA <= 0;

                        MST_O   <= 0;

                        IncDP <= 0;

                        rResetDp <= 1;

                        rClearOutAddress <= 1;

                        rCoreSelectMask <= `SELECT_ALL_CORES;

                        rRenderEnable <= 0;

                        rPrepateWriteAddressForNextCore <= 0;

                        rIncPacketCount <= 0;

                        if (Reset == 0)

                                WBMNextState <= `WBM_WRITE_INSTRUCTION_PHASE1;

                        else

                                WBMNextState <= `WBM_AFTER_RESET;

                end

                //----------------------------------------

                //CLOCK EDGE 0: MASTER presents a valid address on [ADR_O()]

                //MASTER presents valid data on [DAT_O()]

                //MASTER asserts [WE_O] to indicate a WRITE cycle.

                //MASTER asserts [CYC_O] and [TGC_O()] to indicate the start of the cycle.

                //MASTER asserts [STB_O] to indicate the start of the phase.

                `WBM_WRITE_INSTRUCTION_PHASE1:

                begin

                        WE_O <=  1;                                                                                                     //Indicate write cycle

                        CYC_O <= 1;                                                                                                     //Start of the cycle