URL https://opencores.org/ocsvn/theia_gpu/theia_gpu/trunk

Subversion Repositories theia_gpu

[/] [theia_gpu/] [branches/] [gpu_8_cores/] [rtl/] [Collaterals/] [aDefinitions.v] - Blame information for rev 129

Go to most recent revision | Details | Compare with Previous | View Log


/**********************************************************************************
Theaia, Ray Cast Programable graphic Processing Unit.
Copyright (C) 2009  Diego Valverde (diego.valverde.g@gmail.com)
 
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 
***********************************************************************************/
 
 
/*******************************************************************************
Module Description:
 
        This module defines constants that are going to be used
        all over the code. By now you have may noticed that all
        constants are pre-compilation define directives. This is
        for simulation perfomance reasons mainly.
*******************************************************************************/
 
`define MAX_CORES       8 //The number of cores, make sure you update MAX_CORE_BITS!
`define MAX_CORE_BITS   3 // 2 ^ MAX_CORE_BITS = MAX_CORES
`define MAX_TMEM_BANKS  8 //The number of memory banks for TMEM
//---------------------------------------------------------------------------------
//Verilog provides a `default_nettype none compiler directive.  When
//this directive is set, implicit data types are disabled, which will make any
//undeclared signal name a syntax error.This is very usefull to avoid annoying
//automatic 1 bit long wire declaration where you don't want them to be!
`default_nettype none
 
//The clock cycle
`define CLOCK_CYCLE  5
`define CLOCK_PERIOD 10
//---------------------------------------------------------------------------------
//Defines the Scale. This very important because it sets the fixed point precision.
//The Scale defines the number bits that are used as the decimal part of the number.
//The code has been written in such a way that allows you to change the value of the
//Scale, so that it is possible to experiment with different scenarios. SCALE can be
//no smaller that 1 and no bigger that WIDTH.
`define SCALE        17
 
//The next section defines the length of the registers, buses and other structures, 
//do not change this valued unless you really know what you are doing (seriously!)
`define WIDTH        32
`define WB_WIDTH     32  //width of wish-bone buses             
`define LONG_WIDTH   64
 
`define WB_SIMPLE_READ_CYCLE  0
`define WB_SIMPLE_WRITE_CYCLE 1
//---------------------------------------------------------------------------------
//Next are the constants that define the size of the instructions.
//instructions are formed like this:
// Tupe I:
// Operand         (of size INSTRUCTION_OP_LENGTH )
// DestinationAddr (of size DATA_ADDRESS_WIDTH )
// SourceAddrr1    (of size DATA_ADDRESS_WIDTH )
// SourceAddrr2    (of size DATA_ADDRESS_WIDTH )        
//Type II:
// Operand         (of size INSTRUCTION_OP_LENGTH )
// DestinationAddr (of size DATA_ADDRESS_WIDTH )
// InmeadiateValue (of size WIDTH = DATA_ADDRESS_WIDTH * 2 )
//
//You can play around with the size of instuctions, but keep
//in mind that Bits 3 and 4 of the Operand have a special meaning
//that is used for the jump familiy of instructions (see Documentation).
//Also the MSB of Operand is used by the decoder to distinguish 
//between Type I and Type II instructions.
`define INSTRUCTION_WIDTH       64
`define INSTRUCTION_OP_LENGTH   16
`define INSTRUCTION_IMM_BITPOS  54
`define INSTRUCTION_IMM_BIT     6       //don't change this!
 
//Defines the Lenght of Memory blocks
`define DATA_ROW_WIDTH        96
`define DATA_ADDRESS_WIDTH    16
`define ROM_ADDRESS_WIDTH     16
`define ROM_ADDRESS_SEL_MASK  `ROM_ADDRESS_WIDTH'h8000
 
//---------------------------------------------------------------------------------
//The next section defines the code memory entry point for the various code routines
//Please keep this syntax ENTRYPOINT_ADDR_* because the perl script that
//parses the user code expects this pattern in order to read in the tokens
 
//Internal Entry points (default ROM Address)
`define ENTRYPOINT_ADRR_INITIAL                 `ROM_ADDRESS_WIDTH'd0   //0 - This should always be zero
`define ENTRYPOINT_ADRR_CPPU                    `ROM_ADDRESS_WIDTH'd44
`define ENTRYPOINT_ADRR_RGU                     `ROM_ADDRESS_WIDTH'd47
`define ENTRYPOINT_ADRR_AABBIU                  `ROM_ADDRESS_WIDTH'd69
`define ENTRYPOINT_ADRR_BIU                     `ROM_ADDRESS_WIDTH'd157
`define ENTRYPOINT_ADRR_PSU                     `ROM_ADDRESS_WIDTH'd232
`define ENTRYPOINT_ADRR_PSU2                    `ROM_ADDRESS_WIDTH'd248
`define ENTRYPOINT_ADRR_TCC                     `ROM_ADDRESS_WIDTH'd190
`define ENTRYPOINT_ADRR_NPG                     `ROM_ADDRESS_WIDTH'd55
//User Entry points (default ROM Address)
`define ENTRYPOINT_ADRR_USERCONSTANTS           `ROM_ADDRESS_WIDTH'd276
`define ENTRYPOINT_ADRR_PIXELSHADER             `ROM_ADDRESS_WIDTH'd278
`define ENTRYPOINT_ADRR_MAIN                    `ROM_ADDRESS_WIDTH'd37
 
//Please keep this syntax ENTRYPOINT_INDEX_* because the perl script that
//parses the user code expects this pattern in order to read in the tokens
//Internal subroutines
`define ENTRYPOINT_INDEX_INITIAL                `ROM_ADDRESS_WIDTH'h8000
`define ENTRYPOINT_INDEX_CPPU                   `ROM_ADDRESS_WIDTH'h8001
`define ENTRYPOINT_INDEX_RGU                    `ROM_ADDRESS_WIDTH'h8002
`define ENTRYPOINT_INDEX_AABBIU                 `ROM_ADDRESS_WIDTH'h8003
`define ENTRYPOINT_INDEX_BIU                    `ROM_ADDRESS_WIDTH'h8004
`define ENTRYPOINT_INDEX_PSU                    `ROM_ADDRESS_WIDTH'h8005
`define ENTRYPOINT_INDEX_PSU2                   `ROM_ADDRESS_WIDTH'h8006
`define ENTRYPOINT_INDEX_TCC                    `ROM_ADDRESS_WIDTH'h8007
`define ENTRYPOINT_INDEX_NPG                    `ROM_ADDRESS_WIDTH'h8008
//User defined subroutines
`define ENTRYPOINT_INDEX_USERCONSTANTS          `ROM_ADDRESS_WIDTH'h8009
`define ENTRYPOINT_INDEX_PIXELSHADER            `ROM_ADDRESS_WIDTH'h800A
`define ENTRYPOINT_INDEX_MAIN                   `ROM_ADDRESS_WIDTH'h800B
 
`define USER_AABBIU_UCODE_ADDRESS `ROM_ADDRESS_WIDTH'b1000000000000000
//---------------------------------------------------------------------------------
//This handy little macro allows me to print stuff either to STDOUT or a file.
//Notice that the compilation vairable DUMP_CODE must be set if you want to print
//to a file. In XILINX right click 'Simulate Beahvioral Model' -> Properties and
//under 'Specify `define macro name and value' type 'DEBUG=1|DUMP_CODE=1|DEBUG_CORE=<core you want to dump>'
`ifdef DUMP_CODE
 
        `define LOGME  $fwrite(ucode_file,
`else
        `define LOGME  $write(
`endif
//---------------------------------------------------------------------------------     
`define TRUE     32'h1
`define FALSE    32'h0
`define RT_TRUE  48'b1
`define RT_FALSE 48'b0
//---------------------------------------------------------------------------------     
 
`define GENERAL_PURPOSE_REG_ADDR_MASK  `DATA_ADDRESS_WIDTH'h1F
`define VOID                           `DATA_ADDRESS_WIDTH'd0   //0000
//** Control register bits **//
`define CR_EN_LIGHTS   0
`define CR_EN_TEXTURE  1
`define CR_USER_AABBIU 2
/** Swapping registers **/
//** Configuration Registers **//
`define CREG_LIGHT_INFO                   `DATA_ADDRESS_WIDTH'd0
`define CREG_CAMERA_POSITION              `DATA_ADDRESS_WIDTH'd1
`define CREG_PROJECTION_WINDOW_MIN        `DATA_ADDRESS_WIDTH'd2
`define CREG_PROJECTION_WINDOW_MAX        `DATA_ADDRESS_WIDTH'd3
`define CREG_RESOLUTION                   `DATA_ADDRESS_WIDTH'd4
`define CREG_TEXTURE_SIZE                 `DATA_ADDRESS_WIDTH'd5
`define CREG_PIXEL_2D_INITIAL_POSITION    `DATA_ADDRESS_WIDTH'd6
`define CREG_PIXEL_2D_FINAL_POSITION      `DATA_ADDRESS_WIDTH'd7
`define CREG_FIRST_LIGTH                  `DATA_ADDRESS_WIDTH'd8
`define CREG_FIRST_LIGTH_DIFFUSE          `DATA_ADDRESS_WIDTH'd8
//OK, so from address 0x06 to 0x0F is where the lights are,watch out values are harcoded
//for now!! (look in ROM.v for hardcoded values!!!)
 
 
//Don't change the order of the registers. CREG_V* and CREG_UV* registers
//need to be in that specific order for the triangle fetcher to work 
//correctly!
 
`define CREG_AABBMIN                   `DATA_ADDRESS_WIDTH'd42
`define CREG_AABBMAX                   `DATA_ADDRESS_WIDTH'd43
`define CREG_V0                        `DATA_ADDRESS_WIDTH'd44
`define CREG_UV0                       `DATA_ADDRESS_WIDTH'd45
`define CREG_V1                        `DATA_ADDRESS_WIDTH'd46
`define CREG_UV1                       `DATA_ADDRESS_WIDTH'd47
`define CREG_V2                        `DATA_ADDRESS_WIDTH'd48
`define CREG_UV2                       `DATA_ADDRESS_WIDTH'd49
`define CREG_TRI_DIFFUSE               `DATA_ADDRESS_WIDTH'd50
`define CREG_TEX_COLOR1                `DATA_ADDRESS_WIDTH'd53
`define CREG_TEX_COLOR2                `DATA_ADDRESS_WIDTH'd54
`define CREG_TEX_COLOR3                `DATA_ADDRESS_WIDTH'd55
`define CREG_TEX_COLOR4                `DATA_ADDRESS_WIDTH'd56
`define CREG_TEX_COLOR5                `DATA_ADDRESS_WIDTH'd57
`define CREG_TEX_COLOR6                `DATA_ADDRESS_WIDTH'd58
`define CREG_TEX_COLOR7                `DATA_ADDRESS_WIDTH'd59
 
 
/** Non-Swapping registers **/
// ** User Registers **//
//General Purpose registers, the user may put what ever he/she
//wants in here...
`define C1     `DATA_ADDRESS_WIDTH'd64
`define C2     `DATA_ADDRESS_WIDTH'd65
`define C3     `DATA_ADDRESS_WIDTH'd66
`define C4     `DATA_ADDRESS_WIDTH'd67
`define C5     `DATA_ADDRESS_WIDTH'd68
`define C6     `DATA_ADDRESS_WIDTH'd69
`define C7     `DATA_ADDRESS_WIDTH'd70
`define R1              `DATA_ADDRESS_WIDTH'd71
`define R2              `DATA_ADDRESS_WIDTH'd72
`define R3              `DATA_ADDRESS_WIDTH'd73
`define R4              `DATA_ADDRESS_WIDTH'd74
`define R5              `DATA_ADDRESS_WIDTH'd75
`define R6              `DATA_ADDRESS_WIDTH'd76
`define R7              `DATA_ADDRESS_WIDTH'd77
`define R8              `DATA_ADDRESS_WIDTH'd78
`define R9              `DATA_ADDRESS_WIDTH'd79
`define R10             `DATA_ADDRESS_WIDTH'd80
`define R11             `DATA_ADDRESS_WIDTH'd81
`define R12             `DATA_ADDRESS_WIDTH'd82
 
//** Internal Registers **//
`define CREG_PROJECTION_WINDOW_SCALE   `DATA_ADDRESS_WIDTH'd83
`define CREG_UNORMALIZED_DIRECTION     `DATA_ADDRESS_WIDTH'd84
`define CREG_RAY_DIRECTION             `DATA_ADDRESS_WIDTH'd85
`define CREG_E1_LAST                   `DATA_ADDRESS_WIDTH'd86
`define CREG_E2_LAST                   `DATA_ADDRESS_WIDTH'd87
`define CREG_T                         `DATA_ADDRESS_WIDTH'd88
`define CREG_P                         `DATA_ADDRESS_WIDTH'd89
`define CREG_Q                         `DATA_ADDRESS_WIDTH'd90
`define CREG_UV0_LAST                  `DATA_ADDRESS_WIDTH'd91
`define CREG_UV1_LAST                  `DATA_ADDRESS_WIDTH'd92
`define CREG_UV2_LAST                  `DATA_ADDRESS_WIDTH'd93
`define CREG_TRI_DIFFUSE_LAST          `DATA_ADDRESS_WIDTH'd94
`define CREG_LAST_t                    `DATA_ADDRESS_WIDTH'd95
`define CREG_LAST_u                    `DATA_ADDRESS_WIDTH'd96
`define CREG_LAST_v                    `DATA_ADDRESS_WIDTH'd97
`define CREG_COLOR_ACC                 `DATA_ADDRESS_WIDTH'd98
`define CREG_t                         `DATA_ADDRESS_WIDTH'd99
`define CREG_E1                        `DATA_ADDRESS_WIDTH'd100
`define CREG_E2                        `DATA_ADDRESS_WIDTH'd101
`define CREG_DELTA                     `DATA_ADDRESS_WIDTH'd102
`define CREG_u                         `DATA_ADDRESS_WIDTH'd103
`define CREG_v                         `DATA_ADDRESS_WIDTH'd104
`define CREG_H1                        `DATA_ADDRESS_WIDTH'd105
`define CREG_H2                        `DATA_ADDRESS_WIDTH'd106
`define CREG_H3                        `DATA_ADDRESS_WIDTH'd107
`define CREG_PIXEL_PITCH               `DATA_ADDRESS_WIDTH'd108
 
`define CREG_LAST_COL                  `DATA_ADDRESS_WIDTH'd109 //the last valid column, simply CREG_RESOLUTIONX - 1
`define CREG_TEXTURE_COLOR             `DATA_ADDRESS_WIDTH'd110
`define CREG_PIXEL_2D_POSITION         `DATA_ADDRESS_WIDTH'd111
`define CREG_TEXWEIGHT1                `DATA_ADDRESS_WIDTH'd112
`define CREG_TEXWEIGHT2                `DATA_ADDRESS_WIDTH'd113
`define CREG_TEXWEIGHT3                `DATA_ADDRESS_WIDTH'd114
`define CREG_TEXWEIGHT4                `DATA_ADDRESS_WIDTH'd115
`define CREG_TEX_COORD1                `DATA_ADDRESS_WIDTH'd116
`define CREG_TEX_COORD2                `DATA_ADDRESS_WIDTH'd117
`define R99                            `DATA_ADDRESS_WIDTH'd118
`define CREG_ZERO                      `DATA_ADDRESS_WIDTH'd119
`define CREG_CURRENT_OUTPUT_PIXEL      `DATA_ADDRESS_WIDTH'd120
`define CREG_3                         `DATA_ADDRESS_WIDTH'd121
`define CREG_012                       `DATA_ADDRESS_WIDTH'd122
 
//** Ouput registers **//
 
`define OREG_PIXEL_COLOR               `DATA_ADDRESS_WIDTH'd128
`define OREG_TEX_COORD1                `DATA_ADDRESS_WIDTH'd129
`define OREG_TEX_COORD2                `DATA_ADDRESS_WIDTH'd130
`define OREG_ADDR_O                    `DATA_ADDRESS_WIDTH'd131
//-------------------------------------------------------------
//*** Instruction Set ***
//The order of the instructions is important here!. Don't change
//it unless you know what you are doing. For example all the 'SET'
//family of instructions have the MSB bit in 1. This means that
//if you add an instruction and the MSB=1, this instruction will treated
//as type II (see manual) meaning the second 32bit argument is expected to be
//an inmediate value instead of a register address!
//Another example is that in the JUMP family Bits 3 and 4 have a special
//meaning: b4b3 = 01 => X jump type, b4b3 = 10 => Y jump type, finally 
//b4b3 = 11 means Z jump type.
//All this is just to tell you: Don't play with these values!
 
// *** Type I Instructions (OP DST REG1 REG2) ***
`define NOP    `INSTRUCTION_OP_LENGTH'b0_000000         //0
`define ADD     `INSTRUCTION_OP_LENGTH'b0_000001        //1
`define SUB             `INSTRUCTION_OP_LENGTH'b0_000010        //2
`define DIV             `INSTRUCTION_OP_LENGTH'b0_000011        //3
`define MUL     `INSTRUCTION_OP_LENGTH'b0_000100        //4
`define MAG             `INSTRUCTION_OP_LENGTH'b0_000101        //5
`define COPY    `INSTRUCTION_OP_LENGTH'b0_000111        //7
`define JGX             `INSTRUCTION_OP_LENGTH'b0_001_000       //8
`define JLX             `INSTRUCTION_OP_LENGTH'b0_001_001       //9
`define JEQX    `INSTRUCTION_OP_LENGTH'b0_001_010       //10 - A
`define JNEX    `INSTRUCTION_OP_LENGTH'b0_001_011       //11 - B
`define JGEX    `INSTRUCTION_OP_LENGTH'b0_001_100       //12 - C
`define JLEX    `INSTRUCTION_OP_LENGTH'b0_001_101       //13 - D
`define INC             `INSTRUCTION_OP_LENGTH'b0_001_110       //14 - E
`define ZERO    `INSTRUCTION_OP_LENGTH'b0_001_111       //15 - F
`define JGY             `INSTRUCTION_OP_LENGTH'b0_010_000       //16
`define JLY             `INSTRUCTION_OP_LENGTH'b0_010_001       //17
`define JEQY    `INSTRUCTION_OP_LENGTH'b0_010_010       //18
`define JNEY    `INSTRUCTION_OP_LENGTH'b0_010_011       //19
`define JGEY    `INSTRUCTION_OP_LENGTH'b0_010_100       //20
`define JLEY    `INSTRUCTION_OP_LENGTH'b0_010_101       //21
`define CROSS   `INSTRUCTION_OP_LENGTH'b0_010_110       //22
`define DOT             `INSTRUCTION_OP_LENGTH'b0_010_111       //23
`define JGZ             `INSTRUCTION_OP_LENGTH'b0_011_000       //24
`define JLZ             `INSTRUCTION_OP_LENGTH'b0_011_001       //25
`define JEQZ    `INSTRUCTION_OP_LENGTH'b0_011_010       //26
`define JNEZ    `INSTRUCTION_OP_LENGTH'b0_011_011       //27
`define JGEZ    `INSTRUCTION_OP_LENGTH'b0_011_100       //28
`define JLEZ    `INSTRUCTION_OP_LENGTH'b0_011_101       //29
 
//The next instruction is for simulation debug only
//not to be synthetized! Pretty much behaves the same
//as a NOP, only that prints the register value to
//a log file called 'Registers.log'
`ifdef DEBUG
`define DEBUG_PRINT `INSTRUCTION_OP_LENGTH'b0_011_110   //30
`endif
 
`define MULP     `INSTRUCTION_OP_LENGTH'b0_011_111                      //31    R1.z = S1.x * S1.y
`define MOD      `INSTRUCTION_OP_LENGTH'b0_100_000                      //32    R = MODULO( S1,S2 )
`define FRAC     `INSTRUCTION_OP_LENGTH'b0_100_001                      //33    R =FractionalPart( S1 )
`define INTP     `INSTRUCTION_OP_LENGTH'b0_100_010                      //34    R =IntergerPart( S1 )
`define NEG      `INSTRUCTION_OP_LENGTH'b0_100_011                      //35    R = -S1
`define DEC      `INSTRUCTION_OP_LENGTH'b0_100_100                      //36    R = S1--
`define XCHANGEX `INSTRUCTION_OP_LENGTH'b0_100_101              //              R.x = S2.x, R.y = S1.y, R.z = S1.z
`define XCHANGEY `INSTRUCTION_OP_LENGTH'b0_100_110              //              R.x = S1.x, R.y = S2.y, R.z = S1.z
`define XCHANGEZ `INSTRUCTION_OP_LENGTH'b0_100_111              //              R.x = S1.x, R.y = S1.y, R.z = S2.z
`define IMUL     `INSTRUCTION_OP_LENGTH'b0_101_000              //              R = INTEGER( S1 * S2 )
`define UNSCALE  `INSTRUCTION_OP_LENGTH'b0_101_001              //              R = S1 >> SCALE
`define RESCALE  `INSTRUCTION_OP_LENGTH'b0_101_010              //              R = S1 << SCALE
`define INCX     `INSTRUCTION_OP_LENGTH'b0_101_011         //    R.X = S1.X + 1
`define INCY     `INSTRUCTION_OP_LENGTH'b0_101_100         //    R.Y = S1.Y + 1
`define INCZ     `INSTRUCTION_OP_LENGTH'b0_101_101         //    R.Z = S1.Z + 1
`define OMWRITE  `INSTRUCTION_OP_LENGTH'b0_101_111         //47    IO write to O memory
`define TMREAD   `INSTRUCTION_OP_LENGTH'b0_110_000         //48    IO read from T memory
`define LEA      `INSTRUCTION_OP_LENGTH'b0_110_001         //49    Load effective address
 
//*** Type II Instructions (OP DST REG1 IMM) ***
`define RETURN          `INSTRUCTION_OP_LENGTH'b1_000000 //64  0x40
`define SETX            `INSTRUCTION_OP_LENGTH'b1_000001 //65  0x41
`define SETY            `INSTRUCTION_OP_LENGTH'b1_000010 //66
`define SETZ            `INSTRUCTION_OP_LENGTH'b1_000011 //67
`define SWIZZLE3D       `INSTRUCTION_OP_LENGTH'b1_000100 //68 
`define JMP             `INSTRUCTION_OP_LENGTH'b1_011000 //56
`define CALL            `INSTRUCTION_OP_LENGTH'b1_011001 //57
`define RET             `INSTRUCTION_OP_LENGTH'b1_011010 //58
 
//-------------------------------------------------------------
 
//All the posible values for the SWIZZLE3D instruction are defined next
`define SWIZZLE_XXX             32'd0
`define SWIZZLE_YYY             32'd1
`define SWIZZLE_ZZZ             32'd2
`define SWIZZLE_XYY             32'd3
`define SWIZZLE_XXY             32'd4
`define SWIZZLE_XZZ             32'd5
`define SWIZZLE_XXZ             32'd6
`define SWIZZLE_YXX             32'd7
`define SWIZZLE_YYX             32'd8
`define SWIZZLE_YZZ             32'd9
`define SWIZZLE_YYZ             32'd10
`define SWIZZLE_ZXX             32'd11
`define SWIZZLE_ZZX             32'd12
`define SWIZZLE_ZYY             32'd13
`define SWIZZLE_ZZY             32'd14
`define SWIZZLE_XZX             32'd15
`define SWIZZLE_XYX             32'd16
`define SWIZZLE_YXY             32'd17
`define SWIZZLE_YZY             32'd18
`define SWIZZLE_ZXZ             32'd19
`define SWIZZLE_ZYZ             32'd20
`define SWIZZLE_YXZ             32'd21
 
 

Line No.	Rev	Author	Line
1	37	diegovalve	`/**********************************************************************************`
2			`Theaia, Ray Cast Programable graphic Processing Unit.`
3			`Copyright (C) 2009 Diego Valverde (diego.valverde.g@gmail.com)`
4
5			`This program is free software; you can redistribute it and/or`
6			`modify it under the terms of the GNU General Public License`
7			`as published by the Free Software Foundation; either version 2`
8			`of the License, or (at your option) any later version.`
9
10			`This program is distributed in the hope that it will be useful,`
11			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
12			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
13			`GNU General Public License for more details.`
14
15			`You should have received a copy of the GNU General Public License`
16			`along with this program; if not, write to the Free Software`
17			`Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.`
18
19			`***********************************************************************************/`
20
21
22			`/*******************************************************************************`
23			`Module Description:`
24
25			`This module defines constants that are going to be used`
26	120	diegovalve	`all over the code. By now you have may noticed that all`
27	37	diegovalve	`constants are pre-compilation define directives. This is`
28			`for simulation perfomance reasons mainly.`
29			`*******************************************************************************/`
30
31	129	diegovalve	`define MAX_CORES 8 //The number of cores, make sure you update MAX_CORE_BITS!
32			`define MAX_CORE_BITS 3 // 2 ^ MAX_CORE_BITS = MAX_CORES
33			`define MAX_TMEM_BANKS 8 //The number of memory banks for TMEM
34	37	diegovalve	`//---------------------------------------------------------------------------------`
35			//Verilog provides a `default_nettype none compiler directive. When
36			`//this directive is set, implicit data types are disabled, which will make any`
37			`//undeclared signal name a syntax error.This is very usefull to avoid annoying`
38			`//automatic 1 bit long wire declaration where you don't want them to be!`
39			`default_nettype none
40	60	diegovalve
41			`//The clock cycle`
42	119	diegovalve	`define CLOCK_CYCLE 5
43	60	diegovalve	`define CLOCK_PERIOD 10
44	37	diegovalve	`//---------------------------------------------------------------------------------`
45	120	diegovalve	`//Defines the Scale. This very important because it sets the fixed point precision.`
46	37	diegovalve	`//The Scale defines the number bits that are used as the decimal part of the number.`
47			`//The code has been written in such a way that allows you to change the value of the`
48	120	diegovalve	`//Scale, so that it is possible to experiment with different scenarios. SCALE can be`
49	37	diegovalve	`//no smaller that 1 and no bigger that WIDTH.`
50	119	diegovalve	`define SCALE 17
51	37	diegovalve
52	120	diegovalve	`//The next section defines the length of the registers, buses and other structures,`
53	37	diegovalve	`//do not change this valued unless you really know what you are doing (seriously!)`
54	119	diegovalve	`define WIDTH 32
55	37	diegovalve	`define WB_WIDTH 32 //width of wish-bone buses
56	119	diegovalve	`define LONG_WIDTH 64
57	37	diegovalve
58	119	diegovalve	`define WB_SIMPLE_READ_CYCLE 0
59	37	diegovalve	`define WB_SIMPLE_WRITE_CYCLE 1
60			`//---------------------------------------------------------------------------------`
61			`//Next are the constants that define the size of the instructions.`
62			`//instructions are formed like this:`
63			`// Tupe I:`
64	120	diegovalve	`// Operand (of size INSTRUCTION_OP_LENGTH )`
65	37	diegovalve	`// DestinationAddr (of size DATA_ADDRESS_WIDTH )`
66	120	diegovalve	`// SourceAddrr1 (of size DATA_ADDRESS_WIDTH )`
67			`// SourceAddrr2 (of size DATA_ADDRESS_WIDTH )`
68	37	diegovalve	`//Type II:`
69	120	diegovalve	`// Operand (of size INSTRUCTION_OP_LENGTH )`
70	37	diegovalve	`// DestinationAddr (of size DATA_ADDRESS_WIDTH )`
71	120	diegovalve	`// InmeadiateValue (of size WIDTH = DATA_ADDRESS_WIDTH * 2 )`
72			`//`
73	37	diegovalve	`//You can play around with the size of instuctions, but keep`
74			`//in mind that Bits 3 and 4 of the Operand have a special meaning`
75			`//that is used for the jump familiy of instructions (see Documentation).`
76			`//Also the MSB of Operand is used by the decoder to distinguish`
77			`//between Type I and Type II instructions.`
78	119	diegovalve	`define INSTRUCTION_WIDTH 64
79			`define INSTRUCTION_OP_LENGTH 16
80			`define INSTRUCTION_IMM_BITPOS 54
81			`define INSTRUCTION_IMM_BIT 6 //don't change this!
82	37	diegovalve
83			`//Defines the Lenght of Memory blocks`
84	119	diegovalve	`define DATA_ROW_WIDTH 96
85			`define DATA_ADDRESS_WIDTH 16
86			`define ROM_ADDRESS_WIDTH 16
87	60	diegovalve	`define ROM_ADDRESS_SEL_MASK `ROM_ADDRESS_WIDTH'h8000
88	37	diegovalve
89			`//---------------------------------------------------------------------------------`
90	120	diegovalve	`//The next section defines the code memory entry point for the various code routines`
91	63	diegovalve	`//Please keep this syntax ENTRYPOINT_ADDR_* because the perl script that`
92			`//parses the user code expects this pattern in order to read in the tokens`
93	37	diegovalve
94	63	diegovalve	`//Internal Entry points (default ROM Address)`
95	118	diegovalve	`define ENTRYPOINT_ADRR_INITIAL `ROM_ADDRESS_WIDTH'd0 //0 - This should always be zero
96			`define ENTRYPOINT_ADRR_CPPU `ROM_ADDRESS_WIDTH'd44
97			`define ENTRYPOINT_ADRR_RGU `ROM_ADDRESS_WIDTH'd47
98			`define ENTRYPOINT_ADRR_AABBIU `ROM_ADDRESS_WIDTH'd69
99			`define ENTRYPOINT_ADRR_BIU `ROM_ADDRESS_WIDTH'd157
100			`define ENTRYPOINT_ADRR_PSU `ROM_ADDRESS_WIDTH'd232
101			`define ENTRYPOINT_ADRR_PSU2 `ROM_ADDRESS_WIDTH'd248
102			`define ENTRYPOINT_ADRR_TCC `ROM_ADDRESS_WIDTH'd190
103			`define ENTRYPOINT_ADRR_NPG `ROM_ADDRESS_WIDTH'd55
104	63	diegovalve	`//User Entry points (default ROM Address)`
105	118	diegovalve	`define ENTRYPOINT_ADRR_USERCONSTANTS `ROM_ADDRESS_WIDTH'd276
106			`define ENTRYPOINT_ADRR_PIXELSHADER `ROM_ADDRESS_WIDTH'd278
107			`define ENTRYPOINT_ADRR_MAIN `ROM_ADDRESS_WIDTH'd37
108	60	diegovalve
109	63	diegovalve	`//Please keep this syntax ENTRYPOINT_INDEX_* because the perl script that`
110			`//parses the user code expects this pattern in order to read in the tokens`
111			`//Internal subroutines`
112	118	diegovalve	`define ENTRYPOINT_INDEX_INITIAL `ROM_ADDRESS_WIDTH'h8000
113			`define ENTRYPOINT_INDEX_CPPU `ROM_ADDRESS_WIDTH'h8001
114			`define ENTRYPOINT_INDEX_RGU `ROM_ADDRESS_WIDTH'h8002
115			`define ENTRYPOINT_INDEX_AABBIU `ROM_ADDRESS_WIDTH'h8003
116			`define ENTRYPOINT_INDEX_BIU `ROM_ADDRESS_WIDTH'h8004
117			`define ENTRYPOINT_INDEX_PSU `ROM_ADDRESS_WIDTH'h8005
118			`define ENTRYPOINT_INDEX_PSU2 `ROM_ADDRESS_WIDTH'h8006
119			`define ENTRYPOINT_INDEX_TCC `ROM_ADDRESS_WIDTH'h8007
120			`define ENTRYPOINT_INDEX_NPG `ROM_ADDRESS_WIDTH'h8008
121	63	diegovalve	`//User defined subroutines`
122			`define ENTRYPOINT_INDEX_USERCONSTANTS `ROM_ADDRESS_WIDTH'h8009
123	104	diegovalve	`define ENTRYPOINT_INDEX_PIXELSHADER `ROM_ADDRESS_WIDTH'h800A
124			`define ENTRYPOINT_INDEX_MAIN `ROM_ADDRESS_WIDTH'h800B
125	60	diegovalve
126	37	diegovalve	`define USER_AABBIU_UCODE_ADDRESS `ROM_ADDRESS_WIDTH'b1000000000000000
127			`//---------------------------------------------------------------------------------`
128			`//This handy little macro allows me to print stuff either to STDOUT or a file.`
129			`//Notice that the compilation vairable DUMP_CODE must be set if you want to print`
130			`//to a file. In XILINX right click 'Simulate Beahvioral Model' -> Properties and`
131	120	diegovalve	//under 'Specify `define macro name and value' type 'DEBUG=1\|DUMP_CODE=1\|DEBUG_CORE=<core you want to dump>'
132	37	diegovalve	`ifdef DUMP_CODE
133
134			`define LOGME $fwrite(ucode_file,
135			`else
136			`define LOGME $write(
137			`endif
138	104	diegovalve	`//---------------------------------------------------------------------------------`
139	119	diegovalve	`define TRUE 32'h1
140			`define FALSE 32'h0
141			`define RT_TRUE 48'b1
142	37	diegovalve	`define RT_FALSE 48'b0
143			`//---------------------------------------------------------------------------------`
144	70	diegovalve
145			`define GENERAL_PURPOSE_REG_ADDR_MASK `DATA_ADDRESS_WIDTH'h1F
146	119	diegovalve	`define VOID `DATA_ADDRESS_WIDTH'd0 //0000
147	37	diegovalve	`// Control register bits //`
148			`define CR_EN_LIGHTS 0
149			`define CR_EN_TEXTURE 1
150			`define CR_USER_AABBIU 2
151	70	diegovalve	`/ Swapping registers /`
152			`// Configuration Registers //`
153	119	diegovalve	`define CREG_LIGHT_INFO `DATA_ADDRESS_WIDTH'd0
154			`define CREG_CAMERA_POSITION `DATA_ADDRESS_WIDTH'd1
155			`define CREG_PROJECTION_WINDOW_MIN `DATA_ADDRESS_WIDTH'd2
156			`define CREG_PROJECTION_WINDOW_MAX `DATA_ADDRESS_WIDTH'd3
157			`define CREG_RESOLUTION `DATA_ADDRESS_WIDTH'd4
158			`define CREG_TEXTURE_SIZE `DATA_ADDRESS_WIDTH'd5
159			`define CREG_PIXEL_2D_INITIAL_POSITION `DATA_ADDRESS_WIDTH'd6
160			`define CREG_PIXEL_2D_FINAL_POSITION `DATA_ADDRESS_WIDTH'd7
161			`define CREG_FIRST_LIGTH `DATA_ADDRESS_WIDTH'd8
162			`define CREG_FIRST_LIGTH_DIFFUSE `DATA_ADDRESS_WIDTH'd8
163	37	diegovalve	`//OK, so from address 0x06 to 0x0F is where the lights are,watch out values are harcoded`
164			`//for now!! (look in ROM.v for hardcoded values!!!)`
165
166
167	70	diegovalve	`//Don't change the order of the registers. CREG_V* and CREG_UV* registers`
168			`//need to be in that specific order for the triangle fetcher to work`
169			`//correctly!`
170	37	diegovalve
171	119	diegovalve	`define CREG_AABBMIN `DATA_ADDRESS_WIDTH'd42
172			`define CREG_AABBMAX `DATA_ADDRESS_WIDTH'd43
173			`define CREG_V0 `DATA_ADDRESS_WIDTH'd44
174			`define CREG_UV0 `DATA_ADDRESS_WIDTH'd45
175			`define CREG_V1 `DATA_ADDRESS_WIDTH'd46
176			`define CREG_UV1 `DATA_ADDRESS_WIDTH'd47
177			`define CREG_V2 `DATA_ADDRESS_WIDTH'd48
178			`define CREG_UV2 `DATA_ADDRESS_WIDTH'd49
179			`define CREG_TRI_DIFFUSE `DATA_ADDRESS_WIDTH'd50
180			`define CREG_TEX_COLOR1 `DATA_ADDRESS_WIDTH'd53
181			`define CREG_TEX_COLOR2 `DATA_ADDRESS_WIDTH'd54
182			`define CREG_TEX_COLOR3 `DATA_ADDRESS_WIDTH'd55
183			`define CREG_TEX_COLOR4 `DATA_ADDRESS_WIDTH'd56
184			`define CREG_TEX_COLOR5 `DATA_ADDRESS_WIDTH'd57
185			`define CREG_TEX_COLOR6 `DATA_ADDRESS_WIDTH'd58
186			`define CREG_TEX_COLOR7 `DATA_ADDRESS_WIDTH'd59
187	37	diegovalve
188
189	70	diegovalve	`/ Non-Swapping registers /`
190	37	diegovalve	`// User Registers //`
191			`//General Purpose registers, the user may put what ever he/she`
192			`//wants in here...`
193	70	diegovalve	`define C1 `DATA_ADDRESS_WIDTH'd64
194			`define C2 `DATA_ADDRESS_WIDTH'd65
195			`define C3 `DATA_ADDRESS_WIDTH'd66
196			`define C4 `DATA_ADDRESS_WIDTH'd67
197			`define C5 `DATA_ADDRESS_WIDTH'd68
198			`define C6 `DATA_ADDRESS_WIDTH'd69
199			`define C7 `DATA_ADDRESS_WIDTH'd70
200	119	diegovalve	`define R1 `DATA_ADDRESS_WIDTH'd71
201			`define R2 `DATA_ADDRESS_WIDTH'd72
202			`define R3 `DATA_ADDRESS_WIDTH'd73
203	70	diegovalve	`define R4 `DATA_ADDRESS_WIDTH'd74
204			`define R5 `DATA_ADDRESS_WIDTH'd75
205			`define R6 `DATA_ADDRESS_WIDTH'd76
206			`define R7 `DATA_ADDRESS_WIDTH'd77
207			`define R8 `DATA_ADDRESS_WIDTH'd78
208			`define R9 `DATA_ADDRESS_WIDTH'd79
209			`define R10 `DATA_ADDRESS_WIDTH'd80
210			`define R11 `DATA_ADDRESS_WIDTH'd81
211			`define R12 `DATA_ADDRESS_WIDTH'd82
212	37	diegovalve
213	70	diegovalve	`// Internal Registers //`
214	119	diegovalve	`define CREG_PROJECTION_WINDOW_SCALE `DATA_ADDRESS_WIDTH'd83
215			`define CREG_UNORMALIZED_DIRECTION `DATA_ADDRESS_WIDTH'd84
216			`define CREG_RAY_DIRECTION `DATA_ADDRESS_WIDTH'd85
217			`define CREG_E1_LAST `DATA_ADDRESS_WIDTH'd86
218			`define CREG_E2_LAST `DATA_ADDRESS_WIDTH'd87
219			`define CREG_T `DATA_ADDRESS_WIDTH'd88
220			`define CREG_P `DATA_ADDRESS_WIDTH'd89
221			`define CREG_Q `DATA_ADDRESS_WIDTH'd90
222			`define CREG_UV0_LAST `DATA_ADDRESS_WIDTH'd91
223			`define CREG_UV1_LAST `DATA_ADDRESS_WIDTH'd92
224			`define CREG_UV2_LAST `DATA_ADDRESS_WIDTH'd93
225			`define CREG_TRI_DIFFUSE_LAST `DATA_ADDRESS_WIDTH'd94
226			`define CREG_LAST_t `DATA_ADDRESS_WIDTH'd95
227			`define CREG_LAST_u `DATA_ADDRESS_WIDTH'd96
228			`define CREG_LAST_v `DATA_ADDRESS_WIDTH'd97
229			`define CREG_COLOR_ACC `DATA_ADDRESS_WIDTH'd98
230			`define CREG_t `DATA_ADDRESS_WIDTH'd99
231			`define CREG_E1 `DATA_ADDRESS_WIDTH'd100
232			`define CREG_E2 `DATA_ADDRESS_WIDTH'd101
233			`define CREG_DELTA `DATA_ADDRESS_WIDTH'd102
234			`define CREG_u `DATA_ADDRESS_WIDTH'd103
235			`define CREG_v `DATA_ADDRESS_WIDTH'd104
236			`define CREG_H1 `DATA_ADDRESS_WIDTH'd105
237			`define CREG_H2 `DATA_ADDRESS_WIDTH'd106
238			`define CREG_H3 `DATA_ADDRESS_WIDTH'd107
239			`define CREG_PIXEL_PITCH `DATA_ADDRESS_WIDTH'd108
240	76	diegovalve
241	119	diegovalve	`define CREG_LAST_COL `DATA_ADDRESS_WIDTH'd109 //the last valid column, simply CREG_RESOLUTIONX - 1
242	70	diegovalve	`define CREG_TEXTURE_COLOR `DATA_ADDRESS_WIDTH'd110
243	119	diegovalve	`define CREG_PIXEL_2D_POSITION `DATA_ADDRESS_WIDTH'd111
244			`define CREG_TEXWEIGHT1 `DATA_ADDRESS_WIDTH'd112
245			`define CREG_TEXWEIGHT2 `DATA_ADDRESS_WIDTH'd113
246			`define CREG_TEXWEIGHT3 `DATA_ADDRESS_WIDTH'd114
247			`define CREG_TEXWEIGHT4 `DATA_ADDRESS_WIDTH'd115
248	104	diegovalve	`define CREG_TEX_COORD1 `DATA_ADDRESS_WIDTH'd116
249			`define CREG_TEX_COORD2 `DATA_ADDRESS_WIDTH'd117
250			`define R99 `DATA_ADDRESS_WIDTH'd118
251			`define CREG_ZERO `DATA_ADDRESS_WIDTH'd119
252	119	diegovalve	`define CREG_CURRENT_OUTPUT_PIXEL `DATA_ADDRESS_WIDTH'd120
253			`define CREG_3 `DATA_ADDRESS_WIDTH'd121
254	115	diegovalve	`define CREG_012 `DATA_ADDRESS_WIDTH'd122
255	37	diegovalve
256	70	diegovalve	`// Ouput registers //`
257	37	diegovalve
258	119	diegovalve	`define OREG_PIXEL_COLOR `DATA_ADDRESS_WIDTH'd128
259			`define OREG_TEX_COORD1 `DATA_ADDRESS_WIDTH'd129
260			`define OREG_TEX_COORD2 `DATA_ADDRESS_WIDTH'd130
261			`define OREG_ADDR_O `DATA_ADDRESS_WIDTH'd131
262	37	diegovalve	`//-------------------------------------------------------------`
263			`//* Instruction Set *`
264	120	diegovalve	`//The order of the instructions is important here!. Don't change`
265			`//it unless you know what you are doing. For example all the 'SET'`
266	37	diegovalve	`//family of instructions have the MSB bit in 1. This means that`
267			`//if you add an instruction and the MSB=1, this instruction will treated`
268			`//as type II (see manual) meaning the second 32bit argument is expected to be`
269			`//an inmediate value instead of a register address!`
270			`//Another example is that in the JUMP family Bits 3 and 4 have a special`
271			`//meaning: b4b3 = 01 => X jump type, b4b3 = 10 => Y jump type, finally`
272			`//b4b3 = 11 means Z jump type.`
273			`//All this is just to tell you: Don't play with these values!`
274
275			`// * Type I Instructions (OP DST REG1 REG2) *`
276	119	diegovalve	`define NOP `INSTRUCTION_OP_LENGTH'b0_000000 //0
277	37	diegovalve	`define ADD `INSTRUCTION_OP_LENGTH'b0_000001 //1
278			`define SUB `INSTRUCTION_OP_LENGTH'b0_000010 //2
279			`define DIV `INSTRUCTION_OP_LENGTH'b0_000011 //3
280			`define MUL `INSTRUCTION_OP_LENGTH'b0_000100 //4
281			`define MAG `INSTRUCTION_OP_LENGTH'b0_000101 //5
282			`define COPY `INSTRUCTION_OP_LENGTH'b0_000111 //7
283			`define JGX `INSTRUCTION_OP_LENGTH'b0_001_000 //8
284			`define JLX `INSTRUCTION_OP_LENGTH'b0_001_001 //9
285	70	diegovalve	`define JEQX `INSTRUCTION_OP_LENGTH'b0_001_010 //10 - A
286			`define JNEX `INSTRUCTION_OP_LENGTH'b0_001_011 //11 - B
287			`define JGEX `INSTRUCTION_OP_LENGTH'b0_001_100 //12 - C
288			`define JLEX `INSTRUCTION_OP_LENGTH'b0_001_101 //13 - D
289			`define INC `INSTRUCTION_OP_LENGTH'b0_001_110 //14 - E
290			`define ZERO `INSTRUCTION_OP_LENGTH'b0_001_111 //15 - F
291	37	diegovalve	`define JGY `INSTRUCTION_OP_LENGTH'b0_010_000 //16
292			`define JLY `INSTRUCTION_OP_LENGTH'b0_010_001 //17
293			`define JEQY `INSTRUCTION_OP_LENGTH'b0_010_010 //18
294			`define JNEY `INSTRUCTION_OP_LENGTH'b0_010_011 //19
295			`define JGEY `INSTRUCTION_OP_LENGTH'b0_010_100 //20
296			`define JLEY `INSTRUCTION_OP_LENGTH'b0_010_101 //21
297			`define CROSS `INSTRUCTION_OP_LENGTH'b0_010_110 //22
298			`define DOT `INSTRUCTION_OP_LENGTH'b0_010_111 //23
299			`define JGZ `INSTRUCTION_OP_LENGTH'b0_011_000 //24
300			`define JLZ `INSTRUCTION_OP_LENGTH'b0_011_001 //25
301			`define JEQZ `INSTRUCTION_OP_LENGTH'b0_011_010 //26
302			`define JNEZ `INSTRUCTION_OP_LENGTH'b0_011_011 //27
303			`define JGEZ `INSTRUCTION_OP_LENGTH'b0_011_100 //28
304			`define JLEZ `INSTRUCTION_OP_LENGTH'b0_011_101 //29
305
306			`//The next instruction is for simulation debug only`
307			`//not to be synthetized! Pretty much behaves the same`
308			`//as a NOP, only that prints the register value to`
309			`//a log file called 'Registers.log'`
310			`ifdef DEBUG
311			`define DEBUG_PRINT `INSTRUCTION_OP_LENGTH'b0_011_110 //30
312			`endif
313
314	119	diegovalve	`define MULP `INSTRUCTION_OP_LENGTH'b0_011_111 //31 R1.z = S1.x * S1.y
315			`define MOD `INSTRUCTION_OP_LENGTH'b0_100_000 //32 R = MODULO( S1,S2 )
316			`define FRAC `INSTRUCTION_OP_LENGTH'b0_100_001 //33 R =FractionalPart( S1 )
317			`define INTP `INSTRUCTION_OP_LENGTH'b0_100_010 //34 R =IntergerPart( S1 )
318			`define NEG `INSTRUCTION_OP_LENGTH'b0_100_011 //35 R = -S1
319			`define DEC `INSTRUCTION_OP_LENGTH'b0_100_100 //36 R = S1--
320	37	diegovalve	`define XCHANGEX `INSTRUCTION_OP_LENGTH'b0_100_101 // R.x = S2.x, R.y = S1.y, R.z = S1.z
321			`define XCHANGEY `INSTRUCTION_OP_LENGTH'b0_100_110 // R.x = S1.x, R.y = S2.y, R.z = S1.z
322			`define XCHANGEZ `INSTRUCTION_OP_LENGTH'b0_100_111 // R.x = S1.x, R.y = S1.y, R.z = S2.z
323			`define IMUL `INSTRUCTION_OP_LENGTH'b0_101_000 // R = INTEGER( S1 * S2 )
324			`define UNSCALE `INSTRUCTION_OP_LENGTH'b0_101_001 // R = S1 >> SCALE
325			`define RESCALE `INSTRUCTION_OP_LENGTH'b0_101_010 // R = S1 << SCALE
326			`define INCX `INSTRUCTION_OP_LENGTH'b0_101_011 // R.X = S1.X + 1
327			`define INCY `INSTRUCTION_OP_LENGTH'b0_101_100 // R.Y = S1.Y + 1
328	104	diegovalve	`define INCZ `INSTRUCTION_OP_LENGTH'b0_101_101 // R.Z = S1.Z + 1
329			`define OMWRITE `INSTRUCTION_OP_LENGTH'b0_101_111 //47 IO write to O memory
330	119	diegovalve	`define TMREAD `INSTRUCTION_OP_LENGTH'b0_110_000 //48 IO read from T memory
331	104	diegovalve	`define LEA `INSTRUCTION_OP_LENGTH'b0_110_001 //49 Load effective address
332	37	diegovalve
333			`//* Type II Instructions (OP DST REG1 IMM) *`
334	60	diegovalve	`define RETURN `INSTRUCTION_OP_LENGTH'b1_000000 //64 0x40
335	119	diegovalve	`define SETX `INSTRUCTION_OP_LENGTH'b1_000001 //65 0x41
336			`define SETY `INSTRUCTION_OP_LENGTH'b1_000010 //66
337			`define SETZ `INSTRUCTION_OP_LENGTH'b1_000011 //67
338			`define SWIZZLE3D `INSTRUCTION_OP_LENGTH'b1_000100 //68
339			`define JMP `INSTRUCTION_OP_LENGTH'b1_011000 //56
340	104	diegovalve	`define CALL `INSTRUCTION_OP_LENGTH'b1_011001 //57
341			`define RET `INSTRUCTION_OP_LENGTH'b1_011010 //58
342	60	diegovalve
343	37	diegovalve	`//-------------------------------------------------------------`
344
345	120	diegovalve	`//All the posible values for the SWIZZLE3D instruction are defined next`
346	37	diegovalve	`define SWIZZLE_XXX 32'd0
347			`define SWIZZLE_YYY 32'd1
348			`define SWIZZLE_ZZZ 32'd2
349			`define SWIZZLE_XYY 32'd3
350			`define SWIZZLE_XXY 32'd4
351			`define SWIZZLE_XZZ 32'd5
352			`define SWIZZLE_XXZ 32'd6
353			`define SWIZZLE_YXX 32'd7
354			`define SWIZZLE_YYX 32'd8
355			`define SWIZZLE_YZZ 32'd9
356			`define SWIZZLE_YYZ 32'd10
357			`define SWIZZLE_ZXX 32'd11
358			`define SWIZZLE_ZZX 32'd12
359			`define SWIZZLE_ZYY 32'd13
360			`define SWIZZLE_ZZY 32'd14
361			`define SWIZZLE_XZX 32'd15
362			`define SWIZZLE_XYX 32'd16
363			`define SWIZZLE_YXY 32'd17
364			`define SWIZZLE_YZY 32'd18
365			`define SWIZZLE_ZXZ 32'd19
366			`define SWIZZLE_ZYZ 32'd20
367			`define SWIZZLE_YXZ 32'd21
368
369

Browse

Tools

Subversion Repositories theia_gpu

[/] [theia_gpu/] [branches/] [gpu_8_cores/] [rtl/] [Collaterals/] [aDefinitions.v] - Blame information for rev 129