Subversion Repositories timerocd

--------------------------------------------------------------------------------

--    This file is owned and controlled by Xilinx and must be used solely     --

--    for design, simulation, implementation and creation of design files     --

--    limited to Xilinx devices or technologies. Use with non-Xilinx          --

--    devices or technologies is expressly prohibited and immediately         --

--    terminates your license.                                                --

--                                                                            --

--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --

--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --

--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --

--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --

--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --

--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --

--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --

--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --

--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --

--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --

--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --

--    PARTICULAR PURPOSE.                                                     --

--                                                                            --

--    Xilinx products are not intended for use in life support appliances,    --

--    devices, or systems.  Use in such applications are expressly            --

--    prohibited.                                                             --

--                                                                            --

--    (c) Copyright 1995-2015 Xilinx, Inc.                                    --

--    All rights reserved.                                                    --

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

--    Generated from core with identifier: xilinx.com:ip:blk_mem_gen:7.3      --

--                                                                            --

--    The Xilinx LogiCORE IP Block Memory Generator replaces the Dual Port    --

--    Block Memory and Single Port Block Memory LogiCOREs, but is not a       --

--    direct drop-in replacement.  It should be used in all new Xilinx        --

--    designs. The core supports RAM and ROM functions over a wide range of   --

--    widths and depths. Use this core to generate block memories with        --

--    symmetric or asymmetric read and write port widths, as well as cores    --

--    which can perform simultaneous write operations to separate             --

--    locations, and simultaneous read operations from the same location.     --

--    For more information on differences in interface and feature support    --

--    between this core and the Dual Port Block Memory and Single Port        --

--    Block Memory LogiCOREs, please consult the data sheet.                  --

--------------------------------------------------------------------------------

-- The following code must appear in the VHDL architecture header:

------------- Begin Cut here for COMPONENT Declaration ------ COMP_TAG

COMPONENT cmpOffData_memblk

  PORT (

    clka : IN STD_LOGIC;

    addra : IN STD_LOGIC_VECTOR(13 DOWNTO 0);

    douta : OUT STD_LOGIC_VECTOR(15 DOWNTO 0);

    clkb : IN STD_LOGIC;

    addrb : IN STD_LOGIC_VECTOR(13 DOWNTO 0);

    doutb : OUT STD_LOGIC_VECTOR(15 DOWNTO 0)

  );

END COMPONENT;

-- COMP_TAG_END ------ End COMPONENT Declaration ------------

-- The following code must appear in the VHDL architecture

-- body. Substitute your own instance name and net names.

------------- Begin Cut here for INSTANTIATION Template ----- INST_TAG

your_instance_name : cmpOffData_memblk

  PORT MAP (

    clka => clka,

    addra => addra,

    douta => douta,

    clkb => clkb,

    addrb => addrb,

    doutb => doutb

  );

-- INST_TAG_END ------ End INSTANTIATION Template ------------

-- You must compile the wrapper file cmpOffData_memblk.vhd when simulating

-- the core, cmpOffData_memblk. When compiling the wrapper file, be sure to

-- reference the XilinxCoreLib VHDL simulation library. For detailed

-- instructions, please refer to the "CORE Generator Help".