OpenCores
URL https://opencores.org/ocsvn/ts7300_opencore/ts7300_opencore/trunk

Subversion Repositories ts7300_opencore

[/] [ts7300_opencore/] [trunk/] [ethernet/] [eth_defines.v] - Blame information for rev 5

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 joff
//////////////////////////////////////////////////////////////////////
2
////                                                              ////
3
////  eth_defines.v                                               ////
4
////                                                              ////
5
////  This file is part of the Ethernet IP core project           ////
6
////  http://www.opencores.org/projects/ethmac/                   ////
7
////                                                              ////
8
////  Author(s):                                                  ////
9
////      - Igor Mohor (igorM@opencores.org)                      ////
10
////                                                              ////
11
////  All additional information is available in the Readme.txt   ////
12
////  file.                                                       ////
13
////                                                              ////
14
//////////////////////////////////////////////////////////////////////
15
////                                                              ////
16
//// Copyright (C) 2001, 2002 Authors                             ////
17
////                                                              ////
18
//// This source file may be used and distributed without         ////
19
//// restriction provided that this copyright statement is not    ////
20
//// removed from the file and that any derivative work contains  ////
21
//// the original copyright notice and the associated disclaimer. ////
22
////                                                              ////
23
//// This source file is free software; you can redistribute it   ////
24
//// and/or modify it under the terms of the GNU Lesser General   ////
25
//// Public License as published by the Free Software Foundation; ////
26
//// either version 2.1 of the License, or (at your option) any   ////
27
//// later version.                                               ////
28
////                                                              ////
29
//// This source is distributed in the hope that it will be       ////
30
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
31
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
32
//// PURPOSE.  See the GNU Lesser General Public License for more ////
33
//// details.                                                     ////
34
////                                                              ////
35
//// You should have received a copy of the GNU Lesser General    ////
36
//// Public License along with this source; if not, download it   ////
37
//// from http://www.opencores.org/lgpl.shtml                     ////
38
////                                                              ////
39
//////////////////////////////////////////////////////////////////////
40
//
41
// CVS Revision History
42
//
43
// $Log: not supported by cvs2svn $
44
// Revision 1.34  2005/02/21 12:48:06  igorm
45
// Warning fixes.
46
//
47
// Revision 1.33  2003/11/12 18:24:58  tadejm
48
// WISHBONE slave changed and tested from only 32-bit accesss to byte access.
49
//
50
// Revision 1.32  2003/10/17 07:46:13  markom
51
// mbist signals updated according to newest convention
52
//
53
// Revision 1.31  2003/08/14 16:42:58  simons
54
// Artisan ram instance added.
55
//
56
// Revision 1.30  2003/06/13 11:55:37  mohor
57
// Define file in eth_cop.v is changed to eth_defines.v. Some defines were
58
// moved from tb_eth_defines.v to eth_defines.v.
59
//
60
// Revision 1.29  2002/11/19 18:13:49  mohor
61
// r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead.
62
//
63
// Revision 1.28  2002/11/15 14:27:15  mohor
64
// Since r_Rst bit is not used any more, default value is changed to 0xa000.
65
//
66
// Revision 1.27  2002/11/01 18:19:34  mohor
67
// Defines fixed to use generic RAM by default.
68
//
69
// Revision 1.26  2002/10/24 18:53:03  mohor
70
// fpga define added.
71
//
72
// Revision 1.3  2002/10/11 16:57:54  igorm
73
// eth_defines.v tagged with rel_5 used.
74
//
75
// Revision 1.25  2002/10/10 16:47:44  mohor
76
// Defines changed to have ETH_ prolog.
77
// ETH_WISHBONE_B# define added.
78
//
79
// Revision 1.24  2002/10/10 16:33:11  mohor
80
// Bist added.
81
//
82
// Revision 1.23  2002/09/23 18:22:48  mohor
83
// Virtual Silicon RAM might be used in the ASIC implementation of the ethernet
84
// core.
85
//
86
// Revision 1.22  2002/09/04 18:36:49  mohor
87
// Defines for control registers added (ETH_TXCTRL and ETH_RXCTRL).
88
//
89
// Revision 1.21  2002/08/16 22:09:47  mohor
90
// Defines for register width added. mii_rst signal in MIIMODER register
91
// changed.
92
//
93
// Revision 1.20  2002/08/14 19:31:48  mohor
94
// Register TX_BD_NUM is changed so it contains value of the Tx buffer descriptors. No
95
// need to multiply or devide any more.
96
//
97
// Revision 1.19  2002/07/23 15:28:31  mohor
98
// Ram , used for BDs changed from generic_spram to eth_spram_256x32.
99
//
100
// Revision 1.18  2002/05/03 10:15:50  mohor
101
// Outputs registered. Reset changed for eth_wishbone module.
102
//
103
// Revision 1.17  2002/04/24 08:52:19  mohor
104
// Compiler directives added. Tx and Rx fifo size incremented. A "late collision"
105
// bug fixed.
106
//
107
// Revision 1.16  2002/03/19 12:53:29  mohor
108
// Some defines that are used in testbench only were moved to tb_eth_defines.v
109
// file.
110
//
111
// Revision 1.15  2002/02/26 16:11:32  mohor
112
// Number of interrupts changed
113
//
114
// Revision 1.14  2002/02/16 14:03:44  mohor
115
// Registered trimmed. Unused registers removed.
116
//
117
// Revision 1.13  2002/02/16 13:06:33  mohor
118
// EXTERNAL_DMA used instead of WISHBONE_DMA.
119
//
120
// Revision 1.12  2002/02/15 10:58:31  mohor
121
// Changed that were lost with last update put back to the file.
122
//
123
// Revision 1.11  2002/02/14 20:19:41  billditt
124
// Modified for Address Checking,
125
// addition of eth_addrcheck.v
126
//
127
// Revision 1.10  2002/02/12 17:01:19  mohor
128
// HASH0 and HASH1 registers added. 
129
 
130
// Revision 1.9  2002/02/08 16:21:54  mohor
131
// Rx status is written back to the BD.
132
//
133
// Revision 1.8  2002/02/05 16:44:38  mohor
134
// Both rx and tx part are finished. Tested with wb_clk_i between 10 and 200
135
// MHz. Statuses, overrun, control frame transmission and reception still  need
136
// to be fixed.
137
//
138
// Revision 1.7  2002/01/23 10:28:16  mohor
139
// Link in the header changed.
140
//
141
// Revision 1.6  2001/12/05 15:00:16  mohor
142
// RX_BD_NUM changed to TX_BD_NUM (holds number of TX descriptors
143
// instead of the number of RX descriptors).
144
//
145
// Revision 1.5  2001/12/05 10:21:37  mohor
146
// ETH_RX_BD_ADR register deleted. ETH_RX_BD_NUM is used instead.
147
//
148
// Revision 1.4  2001/11/13 14:23:56  mohor
149
// Generic memory model is used. Defines are changed for the same reason.
150
//
151
// Revision 1.3  2001/10/18 12:07:11  mohor
152
// Status signals changed, Adress decoding changed, interrupt controller
153
// added.
154
//
155
// Revision 1.2  2001/09/24 15:02:56  mohor
156
// Defines changed (All precede with ETH_). Small changes because some
157
// tools generate warnings when two operands are together. Synchronization
158
// between two clocks domains in eth_wishbonedma.v is changed (due to ASIC
159
// demands).
160
//
161
// Revision 1.1  2001/08/06 14:44:29  mohor
162
// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
163
// Include files fixed to contain no path.
164
// File names and module names changed ta have a eth_ prologue in the name.
165
// File eth_timescale.v is used to define timescale
166
// All pin names on the top module are changed to contain _I, _O or _OE at the end.
167
// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
168
// and Mdo_OE. The bidirectional signal must be created on the top level. This
169
// is done due to the ASIC tools.
170
//
171
// Revision 1.1  2001/07/30 21:23:42  mohor
172
// Directory structure changed. Files checked and joind together.
173
//
174
//
175
//
176
//
177
//
178
 
179
 
180
 
181
//`define ETH_BIST                    // Bist for usage with Virtual Silicon RAMS
182
 
183
`define ETH_MBIST_CTRL_WIDTH 3        // width of MBIST control bus
184
 
185
// Ethernet implemented in Xilinx Chips (uncomment following lines)
186
// `define ETH_FIFO_XILINX             // Use Xilinx distributed ram for tx and rx fifo
187
// `define ETH_XILINX_RAMB4            // Selection of the used memory for Buffer descriptors
188
                                      // Core is going to be implemented in Virtex FPGA and contains Virtex 
189
                                      // specific elements. 
190
 
191
// Ethernet implemented in Altera Chips (uncomment following lines)
192
`define ETH_ALTERA_ALTSYNCRAM
193
 
194
// Ethernet implemented in ASIC with Virtual Silicon RAMs
195
// `define ETH_VIRTUAL_SILICON_RAM     // Virtual Silicon RAMS used storing buffer decriptors (ASIC implementation)
196
 
197
// Ethernet implemented in ASIC with Artisan RAMs
198
// `define ETH_ARTISAN_RAM             // Artisan RAMS used storing buffer decriptors (ASIC implementation)
199
 
200
// Uncomment when Avalon bus is used
201
//`define ETH_AVALON_BUS
202
 
203
`define ETH_MODER_ADR         8'h0    // 0x0 
204
`define ETH_INT_SOURCE_ADR    8'h1    // 0x4 
205
`define ETH_INT_MASK_ADR      8'h2    // 0x8 
206
`define ETH_IPGT_ADR          8'h3    // 0xC 
207
`define ETH_IPGR1_ADR         8'h4    // 0x10
208
`define ETH_IPGR2_ADR         8'h5    // 0x14
209
`define ETH_PACKETLEN_ADR     8'h6    // 0x18
210
`define ETH_COLLCONF_ADR      8'h7    // 0x1C
211
`define ETH_TX_BD_NUM_ADR     8'h8    // 0x20
212
`define ETH_CTRLMODER_ADR     8'h9    // 0x24
213
`define ETH_MIIMODER_ADR      8'hA    // 0x28
214
`define ETH_MIICOMMAND_ADR    8'hB    // 0x2C
215
`define ETH_MIIADDRESS_ADR    8'hC    // 0x30
216
`define ETH_MIITX_DATA_ADR    8'hD    // 0x34
217
`define ETH_MIIRX_DATA_ADR    8'hE    // 0x38
218
`define ETH_MIISTATUS_ADR     8'hF    // 0x3C
219
`define ETH_MAC_ADDR0_ADR     8'h10   // 0x40
220
`define ETH_MAC_ADDR1_ADR     8'h11   // 0x44
221
`define ETH_HASH0_ADR         8'h12   // 0x48
222
`define ETH_HASH1_ADR         8'h13   // 0x4C
223
`define ETH_TX_CTRL_ADR       8'h14   // 0x50
224
`define ETH_RX_CTRL_ADR       8'h15   // 0x54
225
 
226
 
227
`define ETH_MODER_DEF_0         8'h00
228
`define ETH_MODER_DEF_1         8'hA0
229
`define ETH_MODER_DEF_2         1'h0
230
`define ETH_INT_MASK_DEF_0      7'h0
231
`define ETH_IPGT_DEF_0          7'h12
232
`define ETH_IPGR1_DEF_0         7'h0C
233
`define ETH_IPGR2_DEF_0         7'h12
234
`define ETH_PACKETLEN_DEF_0     8'h00
235
`define ETH_PACKETLEN_DEF_1     8'h06
236
`define ETH_PACKETLEN_DEF_2     8'h40
237
`define ETH_PACKETLEN_DEF_3     8'h00
238
`define ETH_COLLCONF_DEF_0      6'h3f
239
`define ETH_COLLCONF_DEF_2      4'hF
240
`define ETH_TX_BD_NUM_DEF_0     8'h40
241
`define ETH_CTRLMODER_DEF_0     3'h0
242
`define ETH_MIIMODER_DEF_0      8'h64
243
`define ETH_MIIMODER_DEF_1      1'h0
244
`define ETH_MIIADDRESS_DEF_0    5'h00
245
`define ETH_MIIADDRESS_DEF_1    5'h00
246
`define ETH_MIITX_DATA_DEF_0    8'h00
247
`define ETH_MIITX_DATA_DEF_1    8'h00
248
`define ETH_MIIRX_DATA_DEF     16'h0000 // not written from WB
249
`define ETH_MAC_ADDR0_DEF_0     8'h00
250
`define ETH_MAC_ADDR0_DEF_1     8'h00
251
`define ETH_MAC_ADDR0_DEF_2     8'h00
252
`define ETH_MAC_ADDR0_DEF_3     8'h00
253
`define ETH_MAC_ADDR1_DEF_0     8'h00
254
`define ETH_MAC_ADDR1_DEF_1     8'h00
255
`define ETH_HASH0_DEF_0         8'h00
256
`define ETH_HASH0_DEF_1         8'h00
257
`define ETH_HASH0_DEF_2         8'h00
258
`define ETH_HASH0_DEF_3         8'h00
259
`define ETH_HASH1_DEF_0         8'h00
260
`define ETH_HASH1_DEF_1         8'h00
261
`define ETH_HASH1_DEF_2         8'h00
262
`define ETH_HASH1_DEF_3         8'h00
263
`define ETH_TX_CTRL_DEF_0       8'h00 //
264
`define ETH_TX_CTRL_DEF_1       8'h00 //
265
`define ETH_TX_CTRL_DEF_2       1'h0  //
266
`define ETH_RX_CTRL_DEF_0       8'h00
267
`define ETH_RX_CTRL_DEF_1       8'h00
268
 
269
 
270
`define ETH_MODER_WIDTH_0       8
271
`define ETH_MODER_WIDTH_1       8
272
`define ETH_MODER_WIDTH_2       1
273
`define ETH_INT_SOURCE_WIDTH_0  7
274
`define ETH_INT_MASK_WIDTH_0    7
275
`define ETH_IPGT_WIDTH_0        7
276
`define ETH_IPGR1_WIDTH_0       7
277
`define ETH_IPGR2_WIDTH_0       7
278
`define ETH_PACKETLEN_WIDTH_0   8
279
`define ETH_PACKETLEN_WIDTH_1   8
280
`define ETH_PACKETLEN_WIDTH_2   8
281
`define ETH_PACKETLEN_WIDTH_3   8
282
`define ETH_COLLCONF_WIDTH_0    6
283
`define ETH_COLLCONF_WIDTH_2    4
284
`define ETH_TX_BD_NUM_WIDTH_0   8
285
`define ETH_CTRLMODER_WIDTH_0   3
286
`define ETH_MIIMODER_WIDTH_0    8
287
`define ETH_MIIMODER_WIDTH_1    1
288
`define ETH_MIICOMMAND_WIDTH_0  3
289
`define ETH_MIIADDRESS_WIDTH_0  5
290
`define ETH_MIIADDRESS_WIDTH_1  5
291
`define ETH_MIITX_DATA_WIDTH_0  8
292
`define ETH_MIITX_DATA_WIDTH_1  8
293
`define ETH_MIIRX_DATA_WIDTH    16 // not written from WB
294
`define ETH_MIISTATUS_WIDTH     3 // not written from WB
295
`define ETH_MAC_ADDR0_WIDTH_0   8
296
`define ETH_MAC_ADDR0_WIDTH_1   8
297
`define ETH_MAC_ADDR0_WIDTH_2   8
298
`define ETH_MAC_ADDR0_WIDTH_3   8
299
`define ETH_MAC_ADDR1_WIDTH_0   8
300
`define ETH_MAC_ADDR1_WIDTH_1   8
301
`define ETH_HASH0_WIDTH_0       8
302
`define ETH_HASH0_WIDTH_1       8
303
`define ETH_HASH0_WIDTH_2       8
304
`define ETH_HASH0_WIDTH_3       8
305
`define ETH_HASH1_WIDTH_0       8
306
`define ETH_HASH1_WIDTH_1       8
307
`define ETH_HASH1_WIDTH_2       8
308
`define ETH_HASH1_WIDTH_3       8
309
`define ETH_TX_CTRL_WIDTH_0     8
310
`define ETH_TX_CTRL_WIDTH_1     8
311
`define ETH_TX_CTRL_WIDTH_2     1
312
`define ETH_RX_CTRL_WIDTH_0     8
313
`define ETH_RX_CTRL_WIDTH_1     8
314
 
315
 
316
// Outputs are registered (uncomment when needed)
317
`define ETH_REGISTERED_OUTPUTS
318
 
319
// Settings for TX FIFO
320
`define ETH_TX_FIFO_CNT_WIDTH  5
321
`define ETH_TX_FIFO_DEPTH      16
322
`define ETH_TX_FIFO_DATA_WIDTH 32
323
 
324
// Settings for RX FIFO
325
`define ETH_RX_FIFO_CNT_WIDTH  5
326
`define ETH_RX_FIFO_DEPTH      16
327
`define ETH_RX_FIFO_DATA_WIDTH 32
328
 
329
// Burst length
330
`define ETH_BURST_LENGTH       4    // Change also ETH_BURST_CNT_WIDTH
331
`define ETH_BURST_CNT_WIDTH    3    // The counter must be width enough to count to ETH_BURST_LENGTH
332
 
333
// WISHBONE interface is Revision B3 compliant (uncomment when needed)
334
//`define ETH_WISHBONE_B3
335
 
336
 
337
// Following defines are needed when eth_cop.v is used. Otherwise they may be deleted.
338
`define ETH_BASE              32'hd0000000
339
`define ETH_WIDTH             32'h800
340
`define MEMORY_BASE           32'h2000
341
`define MEMORY_WIDTH          32'h10000
342
 
343
`define M1_ADDRESSED_S1 ( (m1_wb_adr_i >= `ETH_BASE)    & (m1_wb_adr_i < (`ETH_BASE    + `ETH_WIDTH   )) )
344
`define M1_ADDRESSED_S2 ( (m1_wb_adr_i >= `MEMORY_BASE) & (m1_wb_adr_i < (`MEMORY_BASE + `MEMORY_WIDTH)) )
345
`define M2_ADDRESSED_S1 ( (m2_wb_adr_i >= `ETH_BASE)    & (m2_wb_adr_i < (`ETH_BASE    + `ETH_WIDTH   )) )
346
`define M2_ADDRESSED_S2 ( (m2_wb_adr_i >= `MEMORY_BASE) & (m2_wb_adr_i < (`MEMORY_BASE + `MEMORY_WIDTH)) )
347
// Previous defines are only needed for eth_cop.v
348
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.