Subversion Repositories ttl_library

-----------------------------------------------------------------------

-- Bipolar TTL models (VHDL)                                         --

-- David R Brooks                                                    --

-- June, 2016.  Perth, Australia                                     --

-- Compliance: VHDL 2008                                             --

-- Testbench for SN74H102N: JK edge-triggered flipflop (AND inputs)  --

-----------------------------------------------------------------------

library ieee;

    use ieee.std_logic_1164.all;

    use ieee.std_logic_misc.all;

    use ieee.numeric_std.all;

    use work.LSTTL.all;

    use work.TTLPrivate.all;

entity Testbench_102 is     -- Top-level bench

generic(

    StimClk  : std_logic      := '1';

    CheckClk : std_logic      := '1';

    Period   : time           := 120 ns;

    Finish   : time           :=  20 us;

    SevLevel : severity_level := failure

);

end entity;

architecture Test of Testbench_102 is

    signal RS, J, K : std_logic;

    signal CLK      : std_logic;

    signal JC, BC   : unsigned(5 downto 0);         -- Test stimuli

    signal D,  E    : std_logic_vector(1 downto 0); -- Expected & actual results

    begin

    -----------------------------------------------------------------------

    -- Standard testbench components

    -----------------------------------------------------------------------

    TB: TTLBench

    generic map(

        StimClk  => StimClk,

        CheckClk => CheckClk,

        Period   => Period,

        Finish   => Finish,

        SevLevel => SevLevel

    )

    port map(

        J    => JC,

        B    => BC,

        CLK  => CLK,

        RS   => RS,

        D    => D,

        E    => E

    );

    -----------------------------------------------------------------------

    -- Generate expected results (with zero delays)

    -----------------------------------------------------------------------

    SIM: process(CLK, RS) is

        variable JK : std_logic_vector(1 downto 0);

    begin

        if    RS = '0' then

            D(0) <= '0';

        elsif falling_edge(CLK) then

            JK := J & K;

            case JK is

                when "00"   => null;

                when "01"   => D(0) <= '0';

                when "10"   => D(0) <= '1';

                when "11"   => D(0) <= not D(0);

                when others => null;

            end case;

        end if;

    end process;

    D(1) <= not D(0);

    J <= JC(0) and JC(1) and JC(2);

    K <= JC(3) and JC(4) and JC(5);

    -----------------------------------------------------------------------

    -- Device Under Test...                        

    -----------------------------------------------------------------------

    DUT: SN74H102N

    port map(

                   -- 

    X_2  => RS,    -- CD\

    X_3  => JC(0), -- J1

    X_4  => JC(1), -- J2

    X_5  => JC(2), -- J3

    X_6  => E(1),  -- Q\

    X_7  => open,  -- GND

    X_8  => E(0),  -- Q

    X_9  => JC(3), -- K1

    X_10 => JC(4), -- K2

    X_11 => JC(5), -- K3

    X_12 => CLK,   -- CP\

    X_13 => '1',   -- SD\

    X_14 => open   -- Vcc

);

end architecture Test;