Subversion Repositories ttl_library

-----------------------------------------------------------------------

-- Bipolar TTL models (VHDL)                                         --

-- David R Brooks                                                    --

-- June, 2016.  Perth, Australia                                     --

-- Compliance: VHDL 2008                                             --

-- Testbench for SN74LS245N: Octal bus transceiver (3-state outputs) --

-----------------------------------------------------------------------

library ieee;

    use ieee.std_logic_1164.all;

    use ieee.std_logic_misc.all;

    use ieee.numeric_std.all;

    use work.LSTTL.all;

    use work.TTLPrivate.all;

entity Testbench_245 is     -- Top-level bench

generic(

    StimClk  : std_logic      := '1';

    CheckClk : std_logic      := '1';

    Period   : time           := 50 ns;

    Finish   : time           := 20 us;

    SevLevel : severity_level := failure

);

end entity;

architecture Test of Testbench_245 is

    signal RS       : std_logic;

    signal CLK      : std_logic;

    signal JC,  BC  : unsigned(7 downto 0);          -- Test stimuli

    signal D,   E   : std_logic_vector(15 downto 0); -- Expected & actual results

    signal A2B, ENB : std_logic;

    signal IA       : std_logic_vector(7 downto 0);

begin

    IA  <= std_logic_vector(JC);

    A2B <= BC(0);

    ENB <= BC(1);

    -----------------------------------------------------------------------

    -- Standard testbench components

    -----------------------------------------------------------------------

    TB: TTLBench

    generic map(

        StimClk  => StimClk,

        CheckClk => CheckClk,

        Period   => Period,

        Finish   => Finish,

        SevLevel => SevLevel

    )

    port map(

        J    => JC,

        B    => BC,

        CLK  => CLK,

        RS   => RS,

        D    => D,

        E    => E

    );

    -----------------------------------------------------------------------

    -- Generate expected results (with zero delays)

    -- Special version for bidirectional circuits

    -----------------------------------------------------------------------

    GG: process(all) is

    begin

        for j in IA'range loop

            D(j)   <= IA(j) when A2B = '0' else 'Z';

            D(j+8) <= IA(j) when A2B = '1' else 'Z';

            E(j)   <= IA(j) when A2B = '0' else 'Z';

            E(j+8) <= IA(j) when A2B = '1' else 'Z';

        end loop;

    end process;

    -----------------------------------------------------------------------

    -- Device Under Test...                        

    -----------------------------------------------------------------------

    DUT: SN74LS245N

    port map(

        X_1  => A2B,   -- A2B

        X_2  => E(0),  -- A0

        X_3  => E(1),  -- A1

        X_4  => E(2),  -- A2

        X_5  => E(3),  -- A3

        X_6  => E(4),  -- A4

        X_7  => E(5),  -- A5

        X_8  => E(6),  -- A6

        X_9  => E(7),  -- A7

        X_10 => open,  -- GND

        X_11 => E(15), -- B7

        X_12 => E(14), -- B6

        X_13 => E(13), -- B5

        X_14 => E(12), -- B4

        X_15 => E(11), -- B3

        X_16 => E(10), -- B2

        X_17 => E(9),  -- B1

        X_18 => E(8),  -- B0

        X_19 => ENB,   -- E\

        X_20 => open   -- Vcc

    );

end architecture Test;