Subversion Repositories ttl_library

-----------------------------------------------------------------------

-- Bipolar TTL models (VHDL)                                         --

-- David R Brooks                                                    --

-- June, 2016.  Perth, Australia                                     --

-- Compliance: VHDL 2008                                             --

-- Testbench for SN74LS83AN: 4-bit binary full adder (fast carry)    --

-----------------------------------------------------------------------

library ieee;

    use ieee.std_logic_1164.all;

    use ieee.std_logic_misc.all;

    use ieee.numeric_std.all;

    use work.LSTTL.all;

    use work.TTLPrivate.all;

entity Testbench_83 is     -- Top-level bench

generic(

    StimClk  : std_logic      := '1';

    CheckClk : std_logic      := '1';

    Period   : time           := 50 ns;

    Finish   : time           := 20 us;

    SevLevel : severity_level := failure

);

end entity;

architecture Test of Testbench_83 is

    signal JC, BC : unsigned(8 downto 0);         -- Test stimuli

    signal D,  E  : std_logic_vector(4 downto 0); -- Expected & actual results

    begin

    -----------------------------------------------------------------------

    -- Standard testbench components

    -----------------------------------------------------------------------

    TB: TTLBench

    generic map(

        StimClk  => StimClk,

        CheckClk => CheckClk,

        Period   => Period,

        Finish   => Finish,

        SevLevel => SevLevel

    )

    port map(

        J    => JC,

        B    => BC,

        CLK  => open,

        RS   => open,

        D    => D,

        E    => E

    );

    -----------------------------------------------------------------------

    -- Generate expected results (with zero delays)

    -----------------------------------------------------------------------

    process(JC) is

        variable X, Y, Z : natural := 0;

    begin

        if now > 1 ns then      -- Meaningless to run at T=0

            X := TTL_to_integer(JC(7 downto 4));

            Y := TTL_to_integer(JC(3 downto 0));

            Z := TTL_to_integer(JC(8 downto 8));

            Z := Z + X + Y;

        end if;

        D <= std_logic_vector(to_unsigned(Z, D'length));

    end process;

    -----------------------------------------------------------------------

    -- Device Under Test...                        

    -----------------------------------------------------------------------

    DUT: SN74LS83AN

    port map(

    X_1  => JC(3),  -- A3

    X_2  => E(2),   -- S2

    X_3  => JC(2),  -- A2

    X_4  => JC(6),  -- B2

    X_5  => open,   -- Vcc

    X_6  => E(1),   -- S1

    X_7  => JC(5),  -- B1

    X_8  => JC(1),  -- A1

    X_9  => E(0),   -- S0

    X_10 => JC(0),  -- A0

    X_11 => JC(4),  -- B0

    X_12 => open,   -- GND

    X_13 => JC(8),  -- C0

    X_14 => E(4),   -- C4

    X_15 => E(3),   -- S3

    X_16 => JC(7)   -- B3

);

end architecture Test;