URL https://opencores.org/ocsvn/turbo8051/turbo8051/trunk

Subversion Repositories turbo8051

[/] [turbo8051/] [trunk/] [rtl/] [spi/] [spi_ctl.v] - Blame information for rev 11

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Tubo 8051 cores SPI Interface Module                        ////
////                                                              ////
////  This file is part of the Turbo 8051 cores project           ////
////  http://www.opencores.org/cores/turbo8051/                   ////
////                                                              ////
////  Description                                                 ////
////  Turbo 8051 definitions.                                     ////
////                                                              ////
////  To Do:                                                      ////
////    nothing                                                   ////
////                                                              ////
////  Author(s):                                                  ////
////      - Dinesh Annayya, dinesha@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
 
 
 
module spi_ctl
       ( clk,
         reset_n,
         sck_int,
 
 
         cfg_op_req,
         cfg_op_type,
         cfg_transfer_size,
         cfg_sck_period,
         cfg_sck_cs_period,
         cfg_cs_byte,
         cfg_datain,
         cfg_dataout,
         op_done,
 
         cs_int_n,
         sck_pe,
         sck_ne,
         shift_out,
         shift_in,
         byte_out,
         byte_in,
         load_byte
 
         );
 
 //*************************************************************************
 
  input          clk, reset_n;
  input          cfg_op_req;
  input [1:0]    cfg_op_type;
  input [1:0]    cfg_transfer_size;
 
  input [5:0]    cfg_sck_period;
  input [4:0]    cfg_sck_cs_period; // cs setup & hold period
  input [7:0]    cfg_cs_byte;
  input [31:0]   cfg_datain;
  output [31:0]  cfg_dataout;
 
  output [7:0]    byte_out; // Byte out for Serial Shifting out
  input  [7:0]    byte_in;  // Serial Received Byte
  output          sck_int;
  output          cs_int_n;
  output          sck_pe;
  output          sck_ne;
  output          shift_out;
  output          shift_in;
  output          load_byte;
  output          op_done;
 
  reg    [31:0]   cfg_dataout;
  reg             sck_ne;
  reg             sck_pe;
  reg             sck_int;
  reg [5:0]       clk_cnt;
  reg [5:0]       sck_cnt;
 
  reg [3:0]       spiif_cs;
  reg             shift_enb;
  reg             cs_int_n;
  reg             clr_sck_cnt ;
  reg             sck_out_en;
 
  wire [5:0]      sck_half_period;
  reg             load_byte;
  reg             shift_in;
  reg             op_done;
  reg [2:0]       byte_cnt;
 
 
  `define SPI_IDLE   4'b0000
  `define SPI_CS_SU  4'b0001
  `define SPI_WRITE  4'b0010
  `define SPI_READ   4'b0011
  `define SPI_CS_HLD 4'b0100
  `define SPI_WAIT   4'b0101
 
 
  assign sck_half_period = {1'b0, cfg_sck_period[5:1]};
  // The first transition on the sck_toggle happens one SCK period
  // after op_en or boot_en is asserted
  always @(posedge clk or negedge reset_n) begin
     if(!reset_n) begin
        sck_ne   <= 1'b0;
        clk_cnt  <= 6'h1;
        sck_pe   <= 1'b0;
        sck_int  <= 1'b0;
     end // if (!reset_n)
     else
     begin
        if(cfg_op_req)
        begin
           if(clk_cnt == sck_half_period)
           begin
              sck_ne <= 1'b1;
              sck_pe <= 1'b0;
              if(sck_out_en) sck_int <= 0;
              clk_cnt <= clk_cnt + 1'b1;
           end // if (clk_cnt == sck_half_period)
           else
           begin
              if(clk_cnt == cfg_sck_period)
              begin
                 sck_ne <= 1'b0;
                 sck_pe <= 1'b1;
                 if(sck_out_en) sck_int <= 1;
                 clk_cnt <= 6'h1;
              end // if (clk_cnt == cfg_sck_period)
              else
              begin
                 clk_cnt <= clk_cnt + 1'b1;
                 sck_pe <= 1'b0;
                 sck_ne <= 1'b0;
              end // else: !if(clk_cnt == cfg_sck_period)
           end // else: !if(clk_cnt == sck_half_period)
        end // if (op_en)
        else
        begin
           clk_cnt    <= 6'h1;
           sck_pe     <= 1'b0;
           sck_ne     <= 1'b0;
        end // else: !if(op_en)
     end // else: !if(!reset_n)
  end // always @ (posedge clk or negedge reset_n)
 
 
wire [1:0] cs_data =  (byte_cnt == 2'b00) ? cfg_cs_byte[7:6]  :
                      (byte_cnt == 2'b01) ? cfg_cs_byte[5:4]  :
                      (byte_cnt == 2'b10) ? cfg_cs_byte[3:2]  : cfg_cs_byte[1:0] ;
 
wire [7:0] byte_out = (byte_cnt == 2'b00) ? cfg_datain[31:24] :
                      (byte_cnt == 2'b01) ? cfg_datain[23:16] :
                      (byte_cnt == 2'b10) ? cfg_datain[15:8]  : cfg_datain[7:0] ;
 
assign shift_out =  shift_enb && sck_ne;
 
always @(posedge clk or negedge reset_n) begin
   if(!reset_n) begin
      spiif_cs    <= `SPI_IDLE;
      sck_cnt     <= 6'h0;
      shift_in    <= 1'b0;
      clr_sck_cnt <= 1'b1;
      byte_cnt    <= 2'b00;
      cs_int_n    <= 1'b1;
      sck_out_en  <= 1'b0;
      shift_enb   <= 1'b0;
      cfg_dataout <= 32'h0;
      load_byte   <= 1'b0;
   end
   else begin
      if(sck_ne)
         sck_cnt <=  clr_sck_cnt  ? 6'h0 : sck_cnt + 1 ;
 
      case(spiif_cs)
      `SPI_IDLE   :
      begin
          op_done     <= 0;
          clr_sck_cnt <= 1'b1;
          sck_out_en  <= 1'b0;
          shift_enb   <= 1'b0;
          if(cfg_op_req)
          begin
              cfg_dataout <= 32'h0;
              spiif_cs    <= `SPI_CS_SU;
           end
           else begin
              spiif_cs <= `SPI_IDLE;
           end
      end
 
      `SPI_CS_SU  :
       begin
          if(sck_ne) begin
            cs_int_n <= cs_data[1];
            if(sck_cnt == cfg_sck_cs_period) begin
               clr_sck_cnt <= 1'b1;
               if(cfg_op_type == 0) begin // Write Mode
                  load_byte   <= 1'b1;
                  spiif_cs    <= `SPI_WRITE;
                  shift_enb   <= 1'b0;
               end else begin
                  shift_in    <= 1;
                  spiif_cs    <= `SPI_READ;
                end
             end
             else begin
                clr_sck_cnt <= 1'b0;
             end
         end
      end
 
      `SPI_WRITE :
       begin
         load_byte   <= 1'b0;
         if(sck_ne) begin
           if(sck_cnt == 3'h7 )begin
              clr_sck_cnt <= 1'b1;
              spiif_cs    <= `SPI_CS_HLD;
              shift_enb   <= 1'b0;
              sck_out_en  <= 1'b0; // Disable clock output
           end
           else begin
              shift_enb   <= 1'b1;
              sck_out_en  <= 1'b1;
              clr_sck_cnt <= 1'b0;
           end
         end else begin
            shift_enb   <= 1'b1;
         end
      end
 
      `SPI_READ :
       begin
         if(sck_ne) begin
             if( sck_cnt == 3'h7 ) begin
                clr_sck_cnt <= 1'b1;
                shift_in    <= 0;
                spiif_cs    <= `SPI_CS_HLD;
                sck_out_en  <= 1'b0; // Disable clock output
             end
             else begin
                sck_out_en  <= 1'b1; // Disable clock output
                clr_sck_cnt <= 1'b0;
             end
         end
      end
 
      `SPI_CS_HLD : begin
         if(sck_ne) begin
             cs_int_n = cs_data[0];
            if(sck_cnt == cfg_sck_cs_period) begin
               if(cfg_op_type == 1) begin // Read Mode
                  cfg_dataout <= (byte_cnt[1:0] == 2'b00) ? { byte_in, cfg_dataout[23:0] } :
                                 (byte_cnt[1:0] == 2'b01) ? { cfg_dataout[31:24] ,
                                                              byte_in, cfg_dataout[15:0] } :
                                 (byte_cnt[1:0] == 2'b10) ? { cfg_dataout[31:16] ,
                                                              byte_in, cfg_dataout[7:0]  } :
                                                            { cfg_dataout[31:8]  ,
                                                              byte_in  } ;
               end
               clr_sck_cnt <= 1'b1;
               if(byte_cnt == cfg_transfer_size) begin
                  spiif_cs <= `SPI_WAIT;
                  byte_cnt <= 0;
                  op_done  <= 1;
               end else begin
                  byte_cnt <= byte_cnt +1;
                  spiif_cs <= `SPI_CS_SU;
               end
            end
            else begin
                clr_sck_cnt <= 1'b0;
            end
         end
      end // case: `SPI_CS_HLD    
      `SPI_WAIT : begin
          if(!cfg_op_req) // Wait for Request de-assertion
             spiif_cs <= `SPI_IDLE;
       end
    endcase // casex(spiif_cs)
   end
end // always @(sck_ne
 
endmodule

Browse

Tools

Subversion Repositories turbo8051

[/] [turbo8051/] [trunk/] [rtl/] [spi/] [spi_ctl.v] - Blame information for rev 11

Line No.	Rev	Author	Line
1	7	dinesha	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// Tubo 8051 cores SPI Interface Module ////`
4			`//// ////`
5			`//// This file is part of the Turbo 8051 cores project ////`
6			`//// http://www.opencores.org/cores/turbo8051/ ////`
7			`//// ////`
8			`//// Description ////`
9			`//// Turbo 8051 definitions. ////`
10			`//// ////`
11			`//// To Do: ////`
12			`//// nothing ////`
13			`//// ////`
14			`//// Author(s): ////`
15			`//// - Dinesh Annayya, dinesha@opencores.org ////`
16			`//// ////`
17			`//////////////////////////////////////////////////////////////////////`
18			`//// ////`
19			`//// Copyright (C) 2000 Authors and OPENCORES.ORG ////`
20			`//// ////`
21			`//// This source file may be used and distributed without ////`
22			`//// restriction provided that this copyright statement is not ////`
23			`//// removed from the file and that any derivative work contains ////`
24			`//// the original copyright notice and the associated disclaimer. ////`
25			`//// ////`
26			`//// This source file is free software; you can redistribute it ////`
27			`//// and/or modify it under the terms of the GNU Lesser General ////`
28			`//// Public License as published by the Free Software Foundation; ////`
29			`//// either version 2.1 of the License, or (at your option) any ////`
30			`//// later version. ////`
31			`//// ////`
32			`//// This source is distributed in the hope that it will be ////`
33			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
34			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
35			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
36			`//// details. ////`
37			`//// ////`
38			`//// You should have received a copy of the GNU Lesser General ////`
39			`//// Public License along with this source; if not, download it ////`
40			`//// from http://www.opencores.org/lgpl.shtml ////`
41			`//// ////`
42			`//////////////////////////////////////////////////////////////////////`
43
44
45
46			`module spi_ctl`
47			`( clk,`
48			`reset_n,`
49			`sck_int,`
50
51
52			`cfg_op_req,`
53			`cfg_op_type,`
54			`cfg_transfer_size,`
55			`cfg_sck_period,`
56			`cfg_sck_cs_period,`
57			`cfg_cs_byte,`
58			`cfg_datain,`
59			`cfg_dataout,`
60			`op_done,`
61
62			`cs_int_n,`
63			`sck_pe,`
64			`sck_ne,`
65			`shift_out,`
66			`shift_in,`
67			`byte_out,`
68			`byte_in,`
69			`load_byte`
70
71			`);`
72
73			`//*************************************************************************`
74
75			`input clk, reset_n;`
76			`input cfg_op_req;`
77			`input [1:0] cfg_op_type;`
78			`input [1:0] cfg_transfer_size;`
79
80			`input [5:0] cfg_sck_period;`
81			`input [4:0] cfg_sck_cs_period; // cs setup & hold period`
82			`input [7:0] cfg_cs_byte;`
83			`input [31:0] cfg_datain;`
84			`output [31:0] cfg_dataout;`
85
86			`output [7:0] byte_out; // Byte out for Serial Shifting out`
87			`input [7:0] byte_in; // Serial Received Byte`
88			`output sck_int;`
89			`output cs_int_n;`
90			`output sck_pe;`
91			`output sck_ne;`
92			`output shift_out;`
93			`output shift_in;`
94			`output load_byte;`
95			`output op_done;`
96
97			`reg [31:0] cfg_dataout;`
98			`reg sck_ne;`
99			`reg sck_pe;`
100			`reg sck_int;`
101			`reg [5:0] clk_cnt;`
102			`reg [5:0] sck_cnt;`
103
104			`reg [3:0] spiif_cs;`
105			`reg shift_enb;`
106			`reg cs_int_n;`
107			`reg clr_sck_cnt ;`
108			`reg sck_out_en;`
109
110			`wire [5:0] sck_half_period;`
111			`reg load_byte;`
112			`reg shift_in;`
113			`reg op_done;`
114			`reg [2:0] byte_cnt;`
115
116
117			`define SPI_IDLE 4'b0000
118			`define SPI_CS_SU 4'b0001
119			`define SPI_WRITE 4'b0010
120			`define SPI_READ 4'b0011
121			`define SPI_CS_HLD 4'b0100
122			`define SPI_WAIT 4'b0101
123
124
125			`assign sck_half_period = {1'b0, cfg_sck_period[5:1]};`
126			`// The first transition on the sck_toggle happens one SCK period`
127			`// after op_en or boot_en is asserted`
128			`always @(posedge clk or negedge reset_n) begin`
129			`if(!reset_n) begin`
130			`sck_ne <= 1'b0;`
131			`clk_cnt <= 6'h1;`
132			`sck_pe <= 1'b0;`
133			`sck_int <= 1'b0;`
134			`end // if (!reset_n)`
135			`else`
136			`begin`
137			`if(cfg_op_req)`
138			`begin`
139			`if(clk_cnt == sck_half_period)`
140			`begin`
141			`sck_ne <= 1'b1;`
142			`sck_pe <= 1'b0;`
143			`if(sck_out_en) sck_int <= 0;`
144			`clk_cnt <= clk_cnt + 1'b1;`
145			`end // if (clk_cnt == sck_half_period)`
146			`else`
147			`begin`
148			`if(clk_cnt == cfg_sck_period)`
149			`begin`
150			`sck_ne <= 1'b0;`
151			`sck_pe <= 1'b1;`
152			`if(sck_out_en) sck_int <= 1;`
153			`clk_cnt <= 6'h1;`
154			`end // if (clk_cnt == cfg_sck_period)`
155			`else`
156			`begin`
157			`clk_cnt <= clk_cnt + 1'b1;`
158			`sck_pe <= 1'b0;`
159			`sck_ne <= 1'b0;`
160			`end // else: !if(clk_cnt == cfg_sck_period)`
161			`end // else: !if(clk_cnt == sck_half_period)`
162			`end // if (op_en)`
163			`else`
164			`begin`
165			`clk_cnt <= 6'h1;`
166			`sck_pe <= 1'b0;`
167			`sck_ne <= 1'b0;`
168			`end // else: !if(op_en)`
169			`end // else: !if(!reset_n)`
170			`end // always @ (posedge clk or negedge reset_n)`
171
172
173			`wire [1:0] cs_data = (byte_cnt == 2'b00) ? cfg_cs_byte[7:6] :`
174			`(byte_cnt == 2'b01) ? cfg_cs_byte[5:4] :`
175			`(byte_cnt == 2'b10) ? cfg_cs_byte[3:2] : cfg_cs_byte[1:0] ;`
176
177			`wire [7:0] byte_out = (byte_cnt == 2'b00) ? cfg_datain[31:24] :`
178			`(byte_cnt == 2'b01) ? cfg_datain[23:16] :`
179			`(byte_cnt == 2'b10) ? cfg_datain[15:8] : cfg_datain[7:0] ;`
180
181			`assign shift_out = shift_enb && sck_ne;`
182
183			`always @(posedge clk or negedge reset_n) begin`
184			`if(!reset_n) begin`
185			spiif_cs <= `SPI_IDLE;
186			`sck_cnt <= 6'h0;`
187			`shift_in <= 1'b0;`
188			`clr_sck_cnt <= 1'b1;`
189			`byte_cnt <= 2'b00;`
190			`cs_int_n <= 1'b1;`
191			`sck_out_en <= 1'b0;`
192			`shift_enb <= 1'b0;`
193			`cfg_dataout <= 32'h0;`
194			`load_byte <= 1'b0;`
195			`end`
196			`else begin`
197			`if(sck_ne)`
198			`sck_cnt <= clr_sck_cnt ? 6'h0 : sck_cnt + 1 ;`
199
200			`case(spiif_cs)`
201			`SPI_IDLE :
202			`begin`
203			`op_done <= 0;`
204			`clr_sck_cnt <= 1'b1;`
205			`sck_out_en <= 1'b0;`
206			`shift_enb <= 1'b0;`
207			`if(cfg_op_req)`
208			`begin`
209			`cfg_dataout <= 32'h0;`
210			spiif_cs <= `SPI_CS_SU;
211			`end`
212			`else begin`
213			spiif_cs <= `SPI_IDLE;
214			`end`
215			`end`
216
217			`SPI_CS_SU :
218			`begin`
219			`if(sck_ne) begin`
220			`cs_int_n <= cs_data[1];`
221			`if(sck_cnt == cfg_sck_cs_period) begin`
222			`clr_sck_cnt <= 1'b1;`
223			`if(cfg_op_type == 0) begin // Write Mode`
224			`load_byte <= 1'b1;`
225			spiif_cs <= `SPI_WRITE;
226			`shift_enb <= 1'b0;`
227			`end else begin`
228			`shift_in <= 1;`
229			spiif_cs <= `SPI_READ;
230			`end`
231			`end`
232			`else begin`
233			`clr_sck_cnt <= 1'b0;`
234			`end`
235			`end`
236			`end`
237
238			`SPI_WRITE :
239			`begin`
240			`load_byte <= 1'b0;`
241			`if(sck_ne) begin`
242			`if(sck_cnt == 3'h7 )begin`
243			`clr_sck_cnt <= 1'b1;`
244			spiif_cs <= `SPI_CS_HLD;
245			`shift_enb <= 1'b0;`
246			`sck_out_en <= 1'b0; // Disable clock output`
247			`end`
248			`else begin`
249			`shift_enb <= 1'b1;`
250			`sck_out_en <= 1'b1;`
251			`clr_sck_cnt <= 1'b0;`
252			`end`
253			`end else begin`
254			`shift_enb <= 1'b1;`
255			`end`
256			`end`
257
258			`SPI_READ :
259			`begin`
260			`if(sck_ne) begin`
261			`if( sck_cnt == 3'h7 ) begin`
262			`clr_sck_cnt <= 1'b1;`
263			`shift_in <= 0;`
264			spiif_cs <= `SPI_CS_HLD;
265			`sck_out_en <= 1'b0; // Disable clock output`
266			`end`
267			`else begin`
268			`sck_out_en <= 1'b1; // Disable clock output`
269			`clr_sck_cnt <= 1'b0;`
270			`end`
271			`end`
272			`end`
273
274			`SPI_CS_HLD : begin
275			`if(sck_ne) begin`
276			`cs_int_n = cs_data[0];`
277			`if(sck_cnt == cfg_sck_cs_period) begin`
278			`if(cfg_op_type == 1) begin // Read Mode`
279			`cfg_dataout <= (byte_cnt[1:0] == 2'b00) ? { byte_in, cfg_dataout[23:0] } :`
280			`(byte_cnt[1:0] == 2'b01) ? { cfg_dataout[31:24] ,`
281			`byte_in, cfg_dataout[15:0] } :`
282			`(byte_cnt[1:0] == 2'b10) ? { cfg_dataout[31:16] ,`
283			`byte_in, cfg_dataout[7:0] } :`
284			`{ cfg_dataout[31:8] ,`
285			`byte_in } ;`
286			`end`
287			`clr_sck_cnt <= 1'b1;`
288			`if(byte_cnt == cfg_transfer_size) begin`
289			spiif_cs <= `SPI_WAIT;
290			`byte_cnt <= 0;`
291			`op_done <= 1;`
292			`end else begin`
293			`byte_cnt <= byte_cnt +1;`
294			spiif_cs <= `SPI_CS_SU;
295			`end`
296			`end`
297			`else begin`
298			`clr_sck_cnt <= 1'b0;`
299			`end`
300			`end`
301			end // case: `SPI_CS_HLD
302			`SPI_WAIT : begin
303			`if(!cfg_op_req) // Wait for Request de-assertion`
304			spiif_cs <= `SPI_IDLE;
305			`end`
306			`endcase // casex(spiif_cs)`
307			`end`
308			`end // always @(sck_ne`
309
310			`endmodule`