OpenCores
URL https://opencores.org/ocsvn/turbo8051/turbo8051/trunk

Subversion Repositories turbo8051

[/] [turbo8051/] [trunk/] [verif/] [agents/] [spi/] [st_m25p20a/] [acdc_check.v] - Blame information for rev 69

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 15 dinesha 
// Author: Mehdi SEBBANE
2 
// May 2002
3 
// Verilog model
4 
// project: M25P20 25 MHz,
5 
// release: 1.4.1
6 
 
7 
 
8 
 
9 
// These Verilog HDL models are provided "as is" without warranty
10 
// of any kind, included but not limited to, implied warranty
11 
// of merchantability and fitness for a particular purpose.
12 
 
13 
 
14 
 
15 
 
16 
 
17 
`timescale 1ns/1ns
18 
`ifdef SFLASH_SPDUP
19 
`include "parameter_fast.v"
20 
`else
21 
`include "parameter.v"
22 
`endif
23 
 
24 
module acdc_check (c, d, s, hold, write_op, read_op);
25 
 
26 
   input c;
27 
   input d;
28 
   input s;
29 
   input hold;
30 
   input write_op;
31 
   input read_op;
32 
 
33 
   ////////////////
34 
   // TIMING VALUES
35 
   ////////////////
36 
   time t_C_rise;
37 
   time t_C_fall;
38 
   time t_H_rise;
39 
   time t_H_fall;
40 
   time t_S_rise;
41 
   time t_S_fall;
42 
   time t_D_change;
43 
   time high_time;
44 
   time low_time;
45 
   ////////////////
46 
 
47 
   reg toggle;
48 
 
49 
   initial
50 
   begin
51 
      high_time = 100000;
52 
      low_time = 100000;
53 
      toggle = 1'b0;
54 
   end
55 
 
56 
   //--------------------------------------------
57 
   // This process checks pulses length on pin /S
58 
   //--------------------------------------------
59 
   always
60 
   begin : shsl_watch
61 
      @(posedge s);
62 
      begin
63 
         if ($time != 0)
64 
         begin
65 
            t_S_rise = $time;
66 
            @(negedge s);
67 
            t_S_fall = $time;
68 
            if ((t_S_fall - t_S_rise) < `TSHSL)
69 
            begin
70 
               $display("ERROR : tSHSL condition violated");
71 
            end
72 
         end
73 
      end
74 
   end
75 
 
76 
   //----------------------------------------------------
77 
   // This process checks select and deselect setup
78 
   // and hold timings
79 
   //----------------------------------------------------
80 
   always
81 
   begin : s_watch
82 
      @(s);
83 
      if ((s == 1'b0) && (hold != 1'b0))
84 
      begin
85 
         if ($time != 0)
86 
         begin
87 
            t_S_fall = $time;
88 
            if (c == 1'b1)
89 
            begin
90 
               if ( ($time - t_C_rise) < `TCHSL)
91 
               begin
92 
                  $display("ERROR :tCHSL condition violated");
93 
               end
94 
            end
95 
            else if (c == 1'b0)
96 
            begin
97 
               @(c);
98 
               if ( ($time - t_S_fall) < `TSLCH)
99 
               begin
100 
                  $display("ERROR :tSLCH condition violated");
101 
               end
102 
            end
103 
         end
104 
      end
105 
      if ((s == 1'b1) && (hold != 1'b0))
106 
      begin
107 
         if ($time != 0)
108 
         begin
109 
            t_S_rise = $time;
110 
            if (c == 1'b1)
111 
            begin
112 
               if ( ($time - t_C_rise) < `TCHSH)
113 
               begin
114 
                  $display("ERROR :tCHSH condition violated");
115 
               end
116 
            end
117 
            else if (c == 1'b0)
118 
            begin
119 
               @(c);
120 
               if ( ($time - t_S_rise) < `TSHCH )
121 
               begin
122 
                  $display("ERROR :tSHCH condition violated");
123 
               end
124 
            end
125 
         end
126 
      end
127 
   end
128 
 
129 
   //---------------------------------
130 
   // This process checks hold timings
131 
   //---------------------------------
132 
   always
133 
   begin : hold_watch
134 
      @(hold);
135 
      if ((hold == 1'b0) && (s == 1'b0))
136 
      begin
137 
         if ($time != 0)
138 
         begin
139 
            t_H_fall = $time ;
140 
            if ( (t_H_fall - t_C_rise) < `TCHHL)
141 
            begin
142 
               $display("ERROR : tCHHL condition violated");
143 
            end
144 
 
145 
            @(posedge c);
146 
            if( ($time - t_H_fall) < `THLCH)
147 
            begin
148 
               $display("ERROR : tHLCH condition violated");
149 
            end
150 
         end
151 
      end
152 
 
153 
 
154 
      if ((hold == 1'b1) && (s == 1'b0))
155 
      begin
156 
         if ($time != 0)
157 
         begin
158 
            t_H_rise = $time ;
159 
            if ( (t_H_rise - t_C_rise) < `TCHHH)
160 
            begin
161 
               $display("ERROR : tCHHH condition violated");
162 
            end
163 
            @(posedge c);
164 
            if( ($time - t_H_fall) < `THHCH)
165 
            begin
166 
               $display("ERROR : tHHCH condition violated");
167 
            end
168 
         end
169 
      end
170 
   end
171 
 
172 
   //--------------------------------------------------
173 
   // This process checks data hold and setup timings
174 
   //--------------------------------------------------
175 
   always
176 
   begin : d_watch
177 
      @(d);
178 
      if ($time != 0)
179 
      begin
180 
         t_D_change = $time;
181 
         if (c == 1'b1)
182 
         begin
183 
            if ( ($time - t_C_rise) < `TCHDX)
184 
            begin
185 
               $display("ERROR : tCHDX condition violated");
186 
            end
187 
         end
188 
         else if (c == 1'b0)
189 
         begin
190 
            @(c);
191 
            if ( ($time - t_D_change) < `TDVCH)
192 
            begin
193 
               $display("ERROR : tDVCH condition violated");
194 
            end
195 
         end
196 
      end
197 
   end
198 
 
199 
   //-------------------------------------
200 
   // This process checks clock high time
201 
   //-------------------------------------
202 
   always
203 
   begin : c_high_watch
204 
      @(c);
205 
      if ($time != 0)
206 
      begin
207 
         if (c == 1'b1)
208 
         begin
209 
            t_C_rise = $time;
210 
            @(negedge c);
211 
            t_C_fall = $time;
212 
            high_time = t_C_fall - t_C_rise;
213 
            toggle = ~toggle;
214 
            if ((t_C_fall - t_C_rise) < `TCH)
215 
            begin
216 
               $display("ERROR : tCH condition violated");
217 
            end
218 
         end
219 
      end
220 
   end
221 
 
222 
   //-------------------------------------
223 
   // This process checks clock low time
224 
   //-------------------------------------
225 
   always
226 
   begin : c_low_watch
227 
      @(c);
228 
      if ($time != 0)
229 
      begin
230 
         if (c == 1'b0)
231 
         begin
232 
            t_C_fall = $time;
233 
            @(posedge c);
234 
            t_C_rise = $time;
235 
            low_time = t_C_rise - t_C_fall;
236 
            toggle = ~toggle;
237 
            if ((t_C_rise - t_C_fall) < `TCL)
238 
            begin
239 
               $display("ERROR : tCL condition violated");
240 
            end
241 
         end
242 
      end
243 
   end
244 
 
245 
   //-----------------------------------------------
246 
   // This process checks clock frequency
247 
   //-----------------------------------------------
248 
//   always @(high_time or low_time or read_op)
249 
   always @(toggle or read_op)
250 
   begin : freq_watch
251 
      if ($time != 0)
252 
      begin
253 
         if (s == 1'b0)
254 
         begin
255 
            if (read_op)
256 
            begin
257 
               if ((high_time + low_time) < `TR)
258 
               begin
259 
                  $display("ERROR : Clock frequency condition violated for READ instruction: fR>20MHz");
260 
               end
261 
            end
262 
            else if ((high_time + low_time) < `TC)
263 
            begin
264 
               $display("ERROR : Clock frequency condition violated: fC>25MHz");
265 
            end
266 
         end
267 
      end
268 
   end
269 
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.