Subversion Repositories tv80

//

// TV80 8-Bit Microprocessor Core

// Based on the VHDL T80 core by Daniel Wallner (jesus@opencores.org)

//

// Copyright (c) 2004 Guy Hutchison (ghutchis@opencores.org)

//

// Permission is hereby granted, free of charge, to any person obtaining a 

// copy of this software and associated documentation files (the "Software"), 

// to deal in the Software without restriction, including without limitation 

// the rights to use, copy, modify, merge, publish, distribute, sublicense, 

// and/or sell copies of the Software, and to permit persons to whom the 

// Software is furnished to do so, subject to the following conditions:

//

// The above copyright notice and this permission notice shall be included 

// in all copies or substantial portions of the Software.

//

// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 

// EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 

// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 

// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY 

// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, 

// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 

// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

// Negative-edge based wrapper allows memory wait_n signal to work

// correctly without resorting to asynchronous logic.

module tv80n (/*AUTOARG*/

  // Outputs

  m1_n, mreq_n, iorq_n, rd_n, wr_n, rfsh_n, halt_n, busak_n, A, dout,

  // Inputs

  reset_n, clk, wait_n, int_n, nmi_n, busrq_n, di

  );

  parameter Mode = 0;    // 0 => Z80, 1 => Fast Z80, 2 => 8080, 3 => GB

  parameter T2Write = 0; // 0 => wr_n active in T3, /=0 => wr_n active in T2

  parameter IOWait  = 1; // 0 => Single cycle I/O, 1 => Std I/O cycle

  input         reset_n;

  input         clk;

  input         wait_n;

  input         int_n;

  input         nmi_n;

  input         busrq_n;

  output        m1_n;

  output        mreq_n;

  output        iorq_n;

  output        rd_n;

  output        wr_n;

  output        rfsh_n;

  output        halt_n;

  output        busak_n;

  output [15:0] A;

  input [7:0]   di;

  output [7:0]  dout;

  reg           mreq_n;

  reg           iorq_n;

  reg           rd_n;

  reg           wr_n;

  reg           nxt_mreq_n;

  reg           nxt_iorq_n;

  reg           nxt_rd_n;

  reg           nxt_wr_n;

  wire          cen;

  wire          intcycle_n;

  wire          no_read;

  wire          write;

  wire          iorq;

  reg [7:0]     di_reg;

  wire [6:0]    mcycle;

  wire [6:0]    tstate;

  assign    cen = 1;

  tv80_core #(Mode, IOWait) i_tv80_core

    (

     .cen (cen),

     .m1_n (m1_n),

     .iorq (iorq),

     .no_read (no_read),

     .write (write),

     .rfsh_n (rfsh_n),

     .halt_n (halt_n),

     .wait_n (wait_n),

     .int_n (int_n),

     .nmi_n (nmi_n),

     .reset_n (reset_n),

     .busrq_n (busrq_n),

     .busak_n (busak_n),

     .clk (clk),

     .IntE (),

     .stop (),

     .A (A),

     .dinst (di),

     .di (di_reg),

     .dout (dout),

     .mc (mcycle),

     .ts (tstate),

     .intcycle_n (intcycle_n)

     );

  always @*

    begin

      nxt_mreq_n = 1;

      nxt_rd_n   = 1;

      nxt_iorq_n = 1;

      nxt_wr_n   = 1;

      if (mcycle[0])

        begin

          if (tstate[1] || tstate[2])

            begin

              nxt_rd_n = ~ intcycle_n;

              nxt_mreq_n = ~ intcycle_n;

              nxt_iorq_n = intcycle_n;

            end

        end // if (mcycle[0])          

      else

        begin

          if ((tstate[1] || tstate[2]) && !no_read && !write)

            begin

              nxt_rd_n = 1'b0;

              nxt_iorq_n = ~ iorq;

              nxt_mreq_n = iorq;

            end

          if (T2Write == 0)

            begin

              if (tstate[2] && write)

                begin

                  nxt_wr_n = 1'b0;

                  nxt_iorq_n = ~ iorq;

                  nxt_mreq_n = iorq;

                end

            end

          else

            begin

              if ((tstate[1] || (tstate[2] && !wait_n)) && write)

                begin

                  nxt_wr_n = 1'b0;

                  nxt_iorq_n = ~ iorq;

                  nxt_mreq_n = iorq;

                end

            end // else: !if(T2write == 0)          

        end // else: !if(mcycle[0])

    end // always @ *

  always @(negedge clk)

    begin

      if (!reset_n)

        begin

          rd_n   <= #1 1'b1;

          wr_n   <= #1 1'b1;

          iorq_n <= #1 1'b1;

          mreq_n <= #1 1'b1;

        end

      else

        begin

          rd_n <= #1 nxt_rd_n;

          wr_n <= #1 nxt_wr_n;

          iorq_n <= #1 nxt_iorq_n;

          mreq_n <= #1 nxt_mreq_n;

        end // else: !if(!reset_n)

    end // always @ (posedge clk or negedge reset_n)

  always @(posedge clk)

    begin

      if (!reset_n)

        begin

          di_reg <= #1 0;

        end

      else

        begin

          if (tstate[2] && wait_n == 1'b1)

            di_reg <= #1 di;

        end // else: !if(!reset_n)

    end // always @ (posedge clk)

endmodule // t80n