Subversion Repositories twofish

-- Twofish_ecb_encryption_monte_carlo_testbench_192bits.vhd

-- Copyright (C) 2006 Spyros Ninos

--

-- This program is free software; you can redistribute it and/or modify 

-- it under the terms of the GNU General Public License as published by

-- the Free Software Foundation; either version 2 of the License, or

-- (at your option) any later version.

-- 

-- This program is distributed in the hope that it will be useful,

-- but WITHOUT ANY WARRANTY; without even the implied warranty of

-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-- GNU General Public License for more details.

-- 

-- You should have received a copy of the GNU General Public License

-- along with this library; see the file COPYING.  If not, write to:

-- 

-- Free Software Foundation

-- 59 Temple Place - Suite 330

-- Boston, MA  02111-1307, USA.

--

-- description  :       this file is the testbench for the Encryption Monte Carlo KAT of the twofish cipher with 192 bit key 

--

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_unsigned.all;

use ieee.std_logic_textio.all;

use ieee.std_logic_arith.all;

use std.textio.all;

entity ecb_encryption_monte_carlo_testbench192 is

end ecb_encryption_monte_carlo_testbench192;

architecture ecb_encryption192_monte_carlo_testbench_arch of ecb_encryption_monte_carlo_testbench192 is

        component       reg128

        port (

                        in_reg128       : in std_logic_vector(127 downto 0);

                        out_reg128 : out std_logic_vector(127 downto 0);

                        enable_reg128, reset_reg128, clk_reg128 : in std_logic

                        );

        end component;

        component twofish_keysched192

        port    (

                        odd_in_tk192,

                        even_in_tk192           : in std_logic_vector(7 downto 0);

                        in_key_tk192            : in std_logic_vector(191 downto 0);

                        out_key_up_tk192,

                        out_key_down_tk192      : out std_logic_vector(31 downto 0)

                        );

        end component;

        component twofish_whit_keysched192

        port    (

                        in_key_twk192           : in std_logic_vector(191 downto 0);

                        out_K0_twk192,

                        out_K1_twk192,

                        out_K2_twk192,

                        out_K3_twk192,

                        out_K4_twk192,

                        out_K5_twk192,

                        out_K6_twk192,

                        out_K7_twk192                   : out std_logic_vector(31 downto 0)

                        );

        end component;

        component twofish_encryption_round192

        port    (

                        in1_ter192,

                        in2_ter192,

                        in3_ter192,

                        in4_ter192,

                        in_Sfirst_ter192,

                        in_Ssecond_ter192,

                        in_Sthird_ter192,

                        in_key_up_ter192,

                        in_key_down_ter192              : in std_logic_vector(31 downto 0);

                        out1_ter192,

                        out2_ter192,

                        out3_ter192,

                        out4_ter192                     : out std_logic_vector(31 downto 0)

                        );

        end component;

        component twofish_data_input

        port    (

                        in_tdi  : in std_logic_vector(127 downto 0);

                        out_tdi : out std_logic_vector(127 downto 0)

                        );

        end component;

        component twofish_data_output

        port    (

                        in_tdo  : in std_logic_vector(127 downto 0);

                        out_tdo : out std_logic_vector(127 downto 0)

                        );

        end component;

        component demux128

        port    ( in_demux128 : in std_logic_vector(127 downto 0);

                        out1_demux128, out2_demux128 : out std_logic_vector(127 downto 0);

                        selection_demux128 : in std_logic

                );

        end component;

        component mux128

        port ( in1_mux128, in2_mux128   : in std_logic_vector(127 downto 0);

                        selection_mux128        : in std_logic;

                        out_mux128 : out std_logic_vector(127 downto 0)

                );

        end component;

        component twofish_S192

        port    (

                        in_key_ts192            : in std_logic_vector(191 downto 0);

                        out_Sfirst_ts192,

                        out_Ssecond_ts192,

                        out_Sthird_ts192                        : out std_logic_vector(31 downto 0)

                        );

        end component;

        FILE input_file : text is in "twofish_ecb_encryption_monte_carlo_testvalues_192bits.txt";

        FILE output_file : text is out "twofish_ecb_encryption_monte_carlo_192bits_results.txt";

        -- we create the functions that transform a number to text

        -- transforming a signle digit to a character

        function digit_to_char(number : integer range 0 to 9) return character is

        begin

                case number is

                        when 0 => return '0';

                        when 1 => return '1';

                        when 2 => return '2';

                        when 3 => return '3';

                        when 4 => return '4';

                        when 5 => return '5';

                        when 6 => return '6';

                        when 7 => return '7';

                        when 8 => return '8';

                        when 9 => return '9';

                end case;

        end;

        -- transforming multi-digit number to text

        function to_text(int_number : integer range 0 to 9999) return string is

                variable        our_text : string (1 to 4) := (others => ' ');

                variable thousands,

                                                hundreds,

                                                tens,

                                                ones            : integer range 0 to 9;

        begin

                ones := int_number mod 10;

                tens := ((int_number mod 100) - ones) / 10;

                hundreds := ((int_number mod 1000) - (int_number mod 100)) / 100;

                thousands := (int_number - (int_number mod 1000)) / 1000;

                our_text(1) := digit_to_char(thousands);

                our_text(2) := digit_to_char(hundreds);

                our_text(3) := digit_to_char(tens);

                our_text(4) := digit_to_char(ones);

                return our_text;

        end;

        signal                  odd_number,

                                even_number                                     : std_logic_vector(7 downto 0);

        signal                  input_data,

                                output_data,

                                to_encr_reg128,

                                from_tdi_to_xors,

                                to_output_whit_xors,

                                from_xors_to_tdo,

                                to_mux, to_demux,

                                from_input_whit_xors,

                                to_round,

                                to_input_mux                                                    : std_logic_vector(127 downto 0) ;

        signal                  twofish_key             : std_logic_vector(191 downto 0);

        signal                  key_up,

                                key_down,

                                Sfirst,

                                Ssecond,

                                Sthird,

                                from_xor0,

                                from_xor1,

                                from_xor2,

                                from_xor3,

                                K0,K1,K2,K3,

                                K4,K5,K6,K7                                                             :  std_logic_vector(31 downto 0);

        signal                  clk                     : std_logic := '0';

        signal                  mux_selection   : std_logic := '0';

        signal                  demux_selection: std_logic := '0';

        signal                  enable_encr_reg : std_logic := '0';

        signal                  reset : std_logic := '0';

        signal                  enable_round_reg : std_logic := '0';

-- begin the testbench arch description

begin

        -- getting data to encrypt

        data_input: twofish_data_input

        port map        (

                                in_tdi  => input_data,

                                out_tdi => from_tdi_to_xors

                                );

        -- producing whitening keys K0..7

        the_whitening_step: twofish_whit_keysched192

        port    map (

                        in_key_twk192           => twofish_key,

                        out_K0_twk192 => K0,

                        out_K1_twk192 => K1,

                        out_K2_twk192 => K2,

                        out_K3_twk192 => K3,

                        out_K4_twk192 => K4,

                        out_K5_twk192 => K5,

                        out_K6_twk192 => K6,

                        out_K7_twk192 => K7

                        );

        -- performing the input whitening XORs

        from_xor0 <= K0 XOR from_tdi_to_xors(127 downto 96);

        from_xor1 <= K1 XOR from_tdi_to_xors(95 downto 64);

        from_xor2 <= K2 XOR from_tdi_to_xors(63 downto 32);

        from_xor3 <= K3 XOR from_tdi_to_xors(31 downto 0);

        from_input_whit_xors <= from_xor0 & from_xor1 & from_xor2 & from_xor3;

        round_reg: reg128

        port map ( in_reg128 => from_input_whit_xors,

                                out_reg128 => to_input_mux,

                                enable_reg128 => enable_round_reg,

                                reset_reg128 => reset,

                                clk_reg128 => clk );

        input_mux: mux128

        port map ( in1_mux128 => to_input_mux,

                                in2_mux128 => to_mux,

                                out_mux128 => to_round,

                                selection_mux128 => mux_selection

                                );

        -- creating a round

        the_keysched_of_the_round: twofish_keysched192

        port    map     (

                                odd_in_tk192 => odd_number,

                                even_in_tk192   => even_number,

                                in_key_tk192 => twofish_key,

                                out_key_up_tk192 => key_up,

                                out_key_down_tk192 => key_down

                                );

        producing_the_Skeys: twofish_S192

        port     map (

                                in_key_ts192            => twofish_key,

                                out_Sfirst_ts192 => Sfirst,

                                out_Ssecond_ts192 => Ssecond,

                                out_Sthird_ts192 => Sthird

                                );

        the_encryption_circuit: twofish_encryption_round192

        port map        (

                                in1_ter192 => to_round(127 downto 96),

                                in2_ter192 => to_round(95 downto 64),

                                in3_ter192 => to_round(63 downto 32),

                                in4_ter192 => to_round(31 downto 0),

                                in_Sfirst_ter192 => Sfirst,

                                in_Ssecond_ter192 => Ssecond,

                                in_Sthird_ter192 => Sthird,

                                in_key_up_ter192 => key_up,

                                in_key_down_ter192              => key_down,

                                out1_ter192 => to_encr_reg128(127 downto 96),

                                out2_ter192 => to_encr_reg128(95 downto 64),

                                out3_ter192 => to_encr_reg128(63 downto 32),

                                out4_ter192     => to_encr_reg128(31 downto 0)

                                );

        encr_reg: reg128

        port map ( in_reg128 => to_encr_reg128,

                                out_reg128 => to_demux,

                                enable_reg128 => enable_encr_reg,

                                reset_reg128 => reset,

                                clk_reg128 => clk );

        output_demux: demux128

        port map ( in_demux128 => to_demux,

                                        out1_demux128 => to_output_whit_xors,

                                        out2_demux128 => to_mux,

                                        selection_demux128 => demux_selection );

        -- don't forget the last swap !!!

        from_xors_to_tdo(127 downto 96) <= K4 XOR to_output_whit_xors(63 downto 32);

        from_xors_to_tdo(95 downto 64) <= K5 XOR to_output_whit_xors(31 downto 0);

        from_xors_to_tdo(63 downto 32) <= K6 XOR to_output_whit_xors(127 downto 96);

        from_xors_to_tdo(31 downto 0) <= K7 XOR to_output_whit_xors(95 downto 64);

        taking_the_output: twofish_data_output

        port    map (

                                in_tdo  => from_xors_to_tdo,

                                out_tdo => output_data

                                );

        -- we create the clock 

        clk <= not clk after 50 ns; -- period 100 ns

        ecb_emc_proc: process

                variable        key_f,  -- key input from file

                                        pt_f,  -- plaintext from file

                                        ct_f    : line; -- ciphertext from file

                variable        key_v : std_logic_vector(191 downto 0);  -- key vector input

                variable                pt_v , -- plaintext vector

                                        ct_v    : std_logic_vector(127 downto 0); -- ciphertext vector

                variable counter_10000 : integer range 0 to 9999 := 0; -- counter for the 10.000 repeats in the 400 next ones

                variable counter_400 : integer range 0 to 399 := 0; -- counter for the 400 repeats

                variable round : integer range 0 to 16 := 0;  -- holds the rounds

                variable intermediate_encryption_result : std_logic_vector(127 downto 0); -- holds the intermediate encryption result 

        begin

                while not endfile(input_file) loop

                        readline(input_file, key_f);

                        readline(input_file, pt_f);

                        readline(input_file,ct_f);

                        hread(key_f,key_v);

                        hread(pt_f,pt_v);

                        hread(ct_f,ct_v);

                        twofish_key <= key_v;

                        intermediate_encryption_result := pt_v;

                        for counter_10000 in 0 to 9999 loop

                                input_data <= intermediate_encryption_result;

                                wait for 25 ns;

                                reset <= '1';

                                wait for 50 ns;

                                reset <= '0';

                                mux_selection <= '0';

                                demux_selection <= '1';

                                enable_encr_reg <= '0';

                                enable_round_reg <= '0';

                                wait for 50 ns;

                                enable_round_reg <= '1';

                                wait for 50 ns;

                                enable_round_reg <= '0';

                                -- the first round

                                even_number <= "00001000"; -- 8

                                odd_number <= "00001001"; -- 9

                                wait for 50 ns;

                                enable_encr_reg <= '1';

                                wait for 50 ns;

                                enable_encr_reg <= '0';

                                demux_selection <= '1';

                                mux_selection <= '1';

                                -- the rest 15 rounds

                                for round in 1 to 15 loop

                                        even_number <= conv_std_logic_vector(((round*2)+8), 8);

                                        odd_number <= conv_std_logic_vector(((round*2)+9), 8);

                                        wait for 50 ns;

                                        enable_encr_reg <= '1';

                                        wait for 50 ns;

                                        enable_encr_reg <= '0';

                                end loop;

                                -- taking final results

                                demux_selection <= '0';

                                wait for 25 ns;

                                intermediate_encryption_result := output_data;

                                assert false report "I=" & to_text(counter_400) & " R=" & to_text(counter_10000) severity note;

                        end loop; -- counter_10000

                        hwrite(key_f, key_v);

                        hwrite(pt_f, pt_v);

                        hwrite(ct_f,output_data);

                        writeline(output_file,key_f);

                        writeline(output_file,pt_f);

                        writeline(output_file,ct_f);

                        assert (ct_v = output_data) report "file entry and encryption result DO NOT match!!! :( " severity failure;

                        assert (ct_v /= output_data) report "Encryption I=" & to_text(counter_400) &" OK" severity note;

                        counter_400 := counter_400 + 1;

                end loop;

                assert false    report  "***** ECB Encryption Monte Carlo Test with 192 bits key size ended succesfully! :) *****"      severity failure;

        end process ecb_emc_proc;

end ecb_encryption192_monte_carlo_testbench_arch;