Subversion Repositories uart2bus

-----------------------------------------------------------------------------------------

-- uart top level module  

--

-----------------------------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

library work;

use work.uart2BusTop_pkg.all;

entity uartTop is

  port ( -- global signals

         clr       : in  std_logic;                     -- global reset input

         clk       : in  std_logic;                     -- global clock input

         -- uart serial signals

         serIn     : in  std_logic;                     -- serial data input

         serOut    : out std_logic;                     -- serial data output

         -- transmit and receive internal interface signals

         txData    : in  std_logic_vector(7 downto 0);  -- data byte to transmit

         newTxData : in  std_logic;                     -- asserted to indicate that there is a new data byte for transmission

         txBusy    : out std_logic;                     -- signs that transmitter is busy

         rxData    : out std_logic_vector(7 downto 0);  -- data byte received

         newRxData : out std_logic;                     -- signs that a new byte was received

         -- baud rate configuration register - see baudGen.vhd for details

         baudFreq  : in  std_logic_vector(11 downto 0); -- baud rate setting registers - see header description

         baudLimit : in  std_logic_vector(15 downto 0); -- baud rate setting registers - see header description

         baudClk   : out std_logic);                    -- 

end uartTop;

architecture Behavioral of uartTop is

  signal ce16 : std_logic; -- clock enable at bit rate

  begin

    -- baud rate generator module

    bg : baudGen

      port map (

        clr => clr,

        clk => clk,

        baudFreq => baudFreq,

        baudLimit => baudLimit,

        ce16 => ce16);

    -- uart receiver

    ut : uartTx

      port map (

        clr => clr,

        clk => clk,

        ce16 => ce16,

        txData => txData,

        newTxData => newTxData,

        serOut => serOut,

        txBusy => txBusy);

    -- uart transmitter

    ur : uartRx

      port map (

        clr => clr,

        clk => clk,

        ce16 => ce16,

        serIn => serIn,

        rxData => rxData,

        newRxData => newRxData);

    baudClk <= ce16;

  end Behavioral;