URL https://opencores.org/ocsvn/uart_block/uart_block/trunk

Subversion Repositories uart_block

[/] [uart_block/] [trunk/] [hdl/] [iseProject/] [serial_receiver.xst] - Blame information for rev 25

Go to most recent revision | Details | Compare with Previous | View Log


set -tmpdir "xst/projnav.tmp"
set -xsthdpdir "xst"
run
-ifn serial_receiver.prj
-ifmt mixed
-ofn serial_receiver
-ofmt NGC
-p xc3s500e-4-fg320
-top serial_receiver
-opt_mode Speed
-opt_level 1
-iuc NO
-keep_hierarchy No
-netlist_hierarchy As_Optimized
-rtlview Yes
-glob_opt AllClockNets
-read_cores YES
-write_timing_constraints NO
-cross_clock_analysis NO
-hierarchy_separator /
-bus_delimiter <>
-case Maintain
-slice_utilization_ratio 100
-bram_utilization_ratio 100
-verilog2001 YES
-fsm_extract YES -fsm_encoding Auto
-safe_implementation No
-fsm_style LUT
-ram_extract Yes
-ram_style Auto
-rom_extract Yes
-mux_style Auto
-decoder_extract YES
-priority_extract Yes
-shreg_extract YES
-shift_extract YES
-xor_collapse YES
-rom_style Auto
-auto_bram_packing NO
-mux_extract Yes
-resource_sharing YES
-async_to_sync NO
-mult_style Auto
-iobuf YES
-max_fanout 100000
-bufg 24
-register_duplication YES
-register_balancing No
-slice_packing YES
-optimize_primitives NO
-use_clock_enable Yes
-use_sync_set Yes
-use_sync_reset Yes
-iob Auto
-equivalent_register_removal YES
-slice_utilization_ratio_maxmargin 5

Line No.	Rev	Author	Line
1	15	leonardoar	`set -tmpdir "xst/projnav.tmp"`
2			`set -xsthdpdir "xst"`
3			`run`
4			`-ifn serial_receiver.prj`
5			`-ifmt mixed`
6			`-ofn serial_receiver`
7			`-ofmt NGC`
8			`-p xc3s500e-4-fg320`
9			`-top serial_receiver`
10			`-opt_mode Speed`
11			`-opt_level 1`
12			`-iuc NO`
13			`-keep_hierarchy No`
14			`-netlist_hierarchy As_Optimized`
15			`-rtlview Yes`
16			`-glob_opt AllClockNets`
17			`-read_cores YES`
18			`-write_timing_constraints NO`
19			`-cross_clock_analysis NO`
20			`-hierarchy_separator /`
21			`-bus_delimiter <>`
22			`-case Maintain`
23			`-slice_utilization_ratio 100`
24			`-bram_utilization_ratio 100`
25			`-verilog2001 YES`
26			`-fsm_extract YES -fsm_encoding Auto`
27			`-safe_implementation No`
28			`-fsm_style LUT`
29			`-ram_extract Yes`
30			`-ram_style Auto`
31			`-rom_extract Yes`
32			`-mux_style Auto`
33			`-decoder_extract YES`
34			`-priority_extract Yes`
35			`-shreg_extract YES`
36			`-shift_extract YES`
37			`-xor_collapse YES`
38			`-rom_style Auto`
39			`-auto_bram_packing NO`
40			`-mux_extract Yes`
41			`-resource_sharing YES`
42			`-async_to_sync NO`
43			`-mult_style Auto`
44			`-iobuf YES`
45			`-max_fanout 100000`
46			`-bufg 24`
47			`-register_duplication YES`
48			`-register_balancing No`
49			`-slice_packing YES`
50			`-optimize_primitives NO`
51			`-use_clock_enable Yes`
52			`-use_sync_set Yes`
53			`-use_sync_reset Yes`
54			`-iob Auto`
55			`-equivalent_register_removal YES`
56			`-slice_utilization_ratio_maxmargin 5`

Browse

Tools

Subversion Repositories uart_block

[/] [uart_block/] [trunk/] [hdl/] [iseProject/] [serial_receiver.xst] - Blame information for rev 25