Subversion Repositories uart_block

--! Test baud_generator module

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_unsigned.all;

use ieee.std_logic_arith.all;

--! Use Global Definitions package

use work.pkgDefinitions.all;

 ENTITY testBaud_generator IS

END testBaud_generator;

ARCHITECTURE behavior OF testBaud_generator IS

    COMPONENT baud_generator

    PORT(

         rst : IN  std_logic;

         clk : IN  std_logic;

         cycle_wait : in  STD_LOGIC_VECTOR ((nBitsLarge-1) downto 0);

                        baud_oversample : out std_logic;

         baud : OUT  std_logic

        );

    END COMPONENT;

   --Inputs

   signal rst : std_logic := '0';

   signal clk : std_logic := '0';

   signal cycle_wait : std_logic_vector((nBitsLarge-1) downto 0) := (others => '0');

        --Outputs

   signal baud : std_logic;

        signal baud_oversample : std_logic;

   -- Clock period definitions (1.8432MHz)

   constant clk_period : time := 0.543 us; -- 0.543us (1.8432Mhz) 2ns (50Mhz)

BEGIN

        --! Instantiate the Unit Under Test (UUT)

   uut: baud_generator PORT MAP (

          rst => rst,

          clk => clk,

          cycle_wait => cycle_wait,

                         baud_oversample => baud_oversample,

          baud => baud

        );

   -- Clock process definitions

   clk_process :process

   begin

                clk <= '0';

                wait for clk_period/2;

                clk <= '1';

                wait for clk_period/2;

   end process;

   -- Stimulus process

   stim_proc: process

   begin

      -- Test the baud generator waiting for 16 clock cycles for 1.8432MHz clock

                rst <= '1';

                cycle_wait <= conv_std_logic_vector(16, (nBitsLarge));

      wait for 2 ns;

                rst <= '0';

      wait for clk_period*300;

      -- Stop Simulation

                assert false report "NONE. End of simulation." severity failure;

      wait;

   end process;

END;