Subversion Repositories usb2uart

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  Tubo 8051 cores common library Module                       ////

////                                                              ////

////  This file is part of the Turbo 8051 cores project           ////

////  http://www.opencores.org/cores/turbo8051/                   ////

////                                                              ////

////  Description                                                 ////

////  Turbo 8051 definitions.                                     ////

////                                                              ////

////  To Do:                                                      ////

////    nothing                                                   ////

////                                                              ////

////  Author(s):                                                  ////

////      - Dinesh Annayya, dinesha@opencores.org                 ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//----------------------------------------------------------------------------

// Simple Double sync logic with Reset value = 1

// This double signal should be used for signal transiting from low to high

//----------------------------------------------------------------------------

module double_sync_low   (

              in_data    ,

              out_clk    ,

              out_rst_n  ,

              out_data

          );

parameter WIDTH = 1;

input [WIDTH-1:0]    in_data    ; // Input from Different clock domain

input                out_clk    ; // Output clock

input                out_rst_n  ; // Active low Reset

output[WIDTH-1:0]    out_data   ; // Output Data

reg [WIDTH-1:0]     in_data_s  ; // One   Cycle sync 

reg [WIDTH-1:0]     in_data_2s ; // two   Cycle sync 

reg [WIDTH-1:0]     in_data_3s ; // three Cycle sync 

assign out_data =  in_data_3s;

always @(negedge out_rst_n or posedge out_clk)

begin

   if(out_rst_n == 1'b0)

   begin

      in_data_s  <= {WIDTH{1'b1}};

      in_data_2s <= {WIDTH{1'b1}};

      in_data_3s <= {WIDTH{1'b1}};

   end

   else

   begin

      in_data_s  <= in_data;

      in_data_2s <= in_data_s;

      in_data_3s <= in_data_2s;

   end

end

endmodule