OpenCores
URL https://opencores.org/ocsvn/usb2uart/usb2uart/trunk

Subversion Repositories usb2uart

[/] [usb2uart/] [trunk/] [verify/] [log/] [run.log] - Blame information for rev 8

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 3 dinesha 
Reading D:/Microsemi/Libero_v10.1/Model/tcl/vsim/pref.tcl
2 
 
3 
# 10.1b
4 
 
5 
# vsim -do modelsim.do -c tb
6 
# //  ModelSim ACTEL 10.1b Apr 27 2012
7 
# //
8 
# //  Copyright 1991-2012 Mentor Graphics Corporation
9 
# //  All Rights Reserved.
10 
# //
11 
# //  THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION
12 
# //  WHICH IS THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS
13 
# //  LICENSORS AND IS SUBJECT TO LICENSE TERMS.
14 
# //
15 
# Loading work.tb
16 
# Loading work.core
17 
# Loading work.usb_phy
18 
# Loading work.usb_tx_phy
19 
# Loading work.usb_rx_phy
20 
# Loading work.usb1_core
21 
# Loading work.usb1_utmi_if
22 
# Loading work.usb1_pl
23 
# Loading work.usb1_pd
24 
# Loading work.usb1_crc5
25 
# Loading work.usb1_crc16
26 
# Loading work.usb1_pa
27 
# Loading work.usb1_idma
28 
# Loading work.usb1_fifo2
29 
# Loading work.usb1_pe
30 
# Loading work.usb1_ctrl
31 
# Loading work.usb1_rom1
32 
# Loading work.sync_fifo
33 
# Loading work.generic_fifo_sc_a
34 
# Loading work.generic_dpram
35 
# Loading work.uart_core
36 
# Loading work.uart_cfg
37 
# Loading work.generic_register
38 
# Loading work.stat_register
39 
# Loading work.clk_ctl
40 
# Loading work.uart_txfsm
41 
# Loading work.uart_rxfsm
42 
# Loading work.async_fifo
43 
# Loading work.double_sync_low
44 
# Loading work.usb_agent
45 
# Loading work.host_usb_bfm
46 
# Loading work.usb_bfm_encoder
47 
# Loading work.usb_bfm_decoder
48 
# Loading work.usb_bfm_dpll
49 
# Loading work.usb_bfm_clk_switch
50 
# Loading work.usb_bfm_nrzi2nrz
51 
# Loading work.usb_bfm_ph_detect
52 
# Loading work.usb_bfm_pulse_puller
53 
# Loading work.uart_agent
54 
# Loading work.test_control
55 
# Loading work.bit_register
56 
# do modelsim.do
57 
# 1200: USB Reset  -----
58 
# 5418: Set Address = 1 -----
59 
# CntrlTransType = 11
60 
# In  --> In task wait for response at time 17346000
61 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 17651000
62 
# In  --> Decoder enabled at time 18362000 in host
63 
# In  --> StopTime = x, SE0StartTime = x
64 
# In  --> receive data = d2
65 
# In  --> StopTime = x, SE0StartTime = x
66 
# In  --> EOP asserted for 2 bit time at time 19163000
67 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
68 
#
69 
#     #######################################################
70 
#     Received Status is ACK at 19163
71 
#     #######################################################
72 
#
73 
# Input Address:00, EndPt:0
74 
# i :          1, CntrlTransType:3; CntrlTransAddr:00;CntrlTransEndP:0
75 
# In  CntrlTransType = 11, WRITE = 11
76 
# In  --> In task wait for response at time 22386000
77 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 22775000
78 
# In  --> Decoder enabled at time 23486000 in host
79 
# In  --> receive data = 4b
80 
# In  --> receive data = 00
81 
# In  --> StopTime = x, SE0StartTime = x
82 
# In  --> receive data = 00
83 
# In  --> StopTime = x, SE0StartTime = x
84 
# In  --> EOP asserted for 2 bit time at time 25631000
85 
#
86 
#     #######################################################
87 
#     Received Status is ACK at 27510
88 
#     #######################################################
89 
#
90 
# 32510: Set configuration  -----
91 
# CntrlTransType = 11
92 
# In  --> In task wait for response at time 44394000
93 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 44699000
94 
# In  --> Decoder enabled at time 45412000 in host
95 
# In  --> StopTime = x, SE0StartTime = x
96 
# In  --> receive data = d2
97 
# In  --> StopTime = x, SE0StartTime = x
98 
# In  --> EOP asserted for 2 bit time at time 46211000
99 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
100 
#
101 
#     #######################################################
102 
#     Received Status is ACK at 46211
103 
#     #######################################################
104 
#
105 
# Input Address:01, EndPt:0
106 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
107 
# In  CntrlTransType = 11, WRITE = 11
108 
# In  --> In task wait for response at time 49434000
109 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 49739000
110 
# In  --> Decoder enabled at time 50453000 in host
111 
# In  --> receive data = 4b
112 
# In  --> receive data = 00
113 
# In  --> StopTime = x, SE0StartTime = x
114 
# In  --> receive data = 00
115 
# In  --> StopTime = x, SE0StartTime = x
116 
# In  --> EOP asserted for 2 bit time at time 52595000
117 
#
118 
#     #######################################################
119 
#     Received Status is ACK at 54474
120 
#     #######################################################
121 
#
122 
# 56474: Configuration done !!!!!!
123 
# CntrlTransType = 11
124 
# In  --> In task wait for response at time 68334000
125 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 68639000
126 
# In  --> Decoder enabled at time 69334000 in host
127 
# In  --> StopTime = x, SE0StartTime = x
128 
# In  --> receive data = d2
129 
# In  --> StopTime = x, SE0StartTime = x
130 
# In  --> EOP asserted for 2 bit time at time 70130000
131 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
132 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
133 
# In  --> DataToggle is 1
134 
# In  --> DataToggle is 4b at time 73374000.
135 
# In  --> sending byte[1] = 00000000
136 
# In  --> sending byte[2] = 00000000
137 
# In  --> sending byte[3] = 00000000
138 
# In  --> sending byte[4] = 00010111
139 
# In  --> raw crc is 254 at time               73374
140 
# In  --> sent crc is bfd5 at time               73374
141 
# In  --> In task wait for response at time 79422000
142 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 79706000
143 
# In  --> Decoder enabled at time 80441000 in host
144 
# In  --> StopTime = x, SE0StartTime = x
145 
# In  --> receive data = d2
146 
# In  --> StopTime = x, SE0StartTime = x
147 
# In  --> EOP asserted for 2 bit time at time 81239000
148 
# In  --> bits received are 7
149 
# In  --> ACK received at time 81239000.
150 
# Input Address:01, EndPt:0
151 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
152 
# In  CntrlTransType = 11, WRITE = 11
153 
# In  --> In task wait for response at time 84462000
154 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 84851000
155 
# In  --> Decoder enabled at time 85550000 in host
156 
# In  --> receive data = 4b
157 
# In  --> receive data = 00
158 
# In  --> StopTime = x, SE0StartTime = x
159 
# In  --> receive data = 00
160 
# In  --> StopTime = x, SE0StartTime = x
161 
# In  --> EOP asserted for 2 bit time at time 87686000
162 
# CntrlTransType = 11
163 
# In  --> In task wait for response at time 101514000
164 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 101798000
165 
# In  --> Decoder enabled at time 102532000 in host
166 
# In  --> StopTime = x, SE0StartTime = x
167 
# In  --> receive data = d2
168 
# In  --> StopTime = x, SE0StartTime = x
169 
# In  --> EOP asserted for 2 bit time at time 103331000
170 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
171 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
172 
# In  --> DataToggle is 1
173 
# In  --> DataToggle is 4b at time 106554000.
174 
# In  --> sending byte[1] = 00000000
175 
# In  --> sending byte[2] = 00000000
176 
# In  --> sending byte[3] = 00000000
177 
# In  --> sending byte[4] = 00001110
178 
# In  --> raw crc is 8107 at time              106554
179 
# In  --> sent crc is 7e1f at time              106554
180 
# In  --> In task wait for response at time 112602000
181 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 112907000
182 
# In  --> Decoder enabled at time 113619000 in host
183 
# In  --> StopTime = x, SE0StartTime = x
184 
# In  --> receive data = d2
185 
# In  --> StopTime = x, SE0StartTime = x
186 
# In  --> EOP asserted for 2 bit time at time 114419000
187 
# In  --> bits received are 7
188 
# In  --> ACK received at time 114419000.
189 
# Input Address:01, EndPt:0
190 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
191 
# In  CntrlTransType = 11, WRITE = 11
192 
# In  --> In task wait for response at time 117642000
193 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 118031000
194 
# In  --> Decoder enabled at time 118748000 in host
195 
# In  --> receive data = 4b
196 
# In  --> receive data = 00
197 
# In  --> StopTime = x, SE0StartTime = x
198 
# In  --> receive data = 00
199 
# In  --> StopTime = x, SE0StartTime = x
200 
# In  --> EOP asserted for 2 bit time at time 120887000
201 
#
202 
# ... Writing char  36 ...
203 
#
204 
# ... Reading the UART Status: xxxxxxxX ...
205 
# CntrlTransType = 10
206 
# In  --> In task wait for response at time 134694000
207 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 134999000
208 
# In  --> Decoder enabled at time 135712000 in host
209 
# In  --> StopTime = x, SE0StartTime = x
210 
# In  --> receive data = d2
211 
# In  --> StopTime = x, SE0StartTime = x
212 
# In  --> EOP asserted for 2 bit time at time 136511000
213 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
214 
# CntrlTransType = 10
215 
# In  --> In task wait for response at time 139650000
216 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 139955000
217 
# In  --> Decoder enabled at time 140669000 in host
218 
# In  --> receive data = 4b
219 
# In  --> receive data = 00
220 
# In  --> receive data = 00
221 
# In  --> receive data = 00
222 
# In  --> receive data = 02
223 
# In  --> receive data = 7e
224 
# In  --> StopTime = x, SE0StartTime = x
225 
# In  --> receive data = 1a
226 
# In  --> StopTime = x, SE0StartTime = x
227 
# In  --> EOP asserted for 2 bit time at time 145562000
228 
# In  --> Data toggle recevied is 1001011 at time 145646000
229 
# In  --> received byte[1] = 00000000
230 
# In  --> received byte[2] = 00000000
231 
# In  --> received byte[3] = 00000000
232 
# In  --> received byte[4] = 00000010
233 
# In  --> calculated crc is 81a7 at time 145646000.
234 
# In  --> received raw crc is 81a7 at time 145646000.
235 
# In  --> received crc is 7e1a at time 145646000.
236 
# In  --> tmpCrc 7e1a, at time 145646000
237 
# In  --> sending ACK at time 147546000
238 
# RecvBuffer[0]  = 00000000  : 0
239 
# RecvBuffer[1]  = 00000000  : 0
240 
# RecvBuffer[2]  = 00000000  : 0
241 
# RecvBuffer[3]  = 00000010  : 2
242 
# In  --> In task wait for response at time 154098000
243 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 154382000
244 
# In  --> Decoder enabled at time 155114000 in host
245 
# In  --> StopTime = x, SE0StartTime = x
246 
# In  --> receive data = d2
247 
# In  --> StopTime = x, SE0StartTime = x
248 
# In  --> EOP asserted for 2 bit time at time 155915000
249 
#
250 
# ... Reading the UART Status: 00000002 ...
251 
# CntrlTransType = 10
252 
# In  --> In task wait for response at time 167790000
253 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 168095000
254 
# In  --> Decoder enabled at time 168803000 in host
255 
# In  --> StopTime = x, SE0StartTime = x
256 
# In  --> receive data = d2
257 
# In  --> StopTime = x, SE0StartTime = x
258 
# In  --> EOP asserted for 2 bit time at time 169607000
259 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
260 
# CntrlTransType = 10
261 
# In  --> In task wait for response at time 172746000
262 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 173051000
263 
# In  --> Decoder enabled at time 173763000 in host
264 
# In  --> receive data = 4b
265 
# In  --> receive data = 00
266 
# In  --> receive data = 00
267 
# In  --> receive data = 00
268 
# In  --> receive data = 02
269 
# In  --> receive data = 7e
270 
# In  --> StopTime = x, SE0StartTime = x
271 
# In  --> receive data = 1a
272 
# In  --> StopTime = x, SE0StartTime = x
273 
# In  --> EOP asserted for 2 bit time at time 178658000
274 
# In  --> Data toggle recevied is 1001011 at time 178742000
275 
# In  --> received byte[1] = 00000000
276 
# In  --> received byte[2] = 00000000
277 
# In  --> received byte[3] = 00000000
278 
# In  --> received byte[4] = 00000010
279 
# In  --> calculated crc is 81a7 at time 178742000.
280 
# In  --> received raw crc is 81a7 at time 178742000.
281 
# In  --> received crc is 7e1a at time 178742000.
282 
# In  --> tmpCrc 7e1a, at time 178742000
283 
# In  --> sending ACK at time 180642000
284 
# RecvBuffer[0]  = 00000000  : 0
285 
# RecvBuffer[1]  = 00000000  : 0
286 
# RecvBuffer[2]  = 00000000  : 0
287 
# RecvBuffer[3]  = 00000010  : 2
288 
# ... Write data 24 to UART done cnt :          1 ...
289 
#
290 
#
291 
# ... Writing char 129 ...
292 
# In  --> In task wait for response at time 187194000
293 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 187478000
294 
# In  --> Decoder enabled at time 188208000 in host
295 
# In  --> StopTime = x, SE0StartTime = x
296 
# In  --> receive data = d2
297 
# In  --> StopTime = x, SE0StartTime = x
298 
# In  --> EOP asserted for 2 bit time at time 188990000
299 
#
300 
# ... Reading the UART Status: 00000002 ...
301 
# CntrlTransType = 10
302 
# In  --> In task wait for response at time 200886000
303 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 201170000
304 
# In  --> Decoder enabled at time 201897000 in host
305 
# In  --> StopTime = x, SE0StartTime = x
306 
# In  --> receive data = d2
307 
# In  --> StopTime = x, SE0StartTime = x
308 
# In  --> EOP asserted for 2 bit time at time 202682000
309 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
310 
# CntrlTransType = 10
311 
# In  --> In task wait for response at time 205842000
312 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 206210000
313 
# In  --> Decoder enabled at time 206943000 in host
314 
# In  --> receive data = 4b
315 
# In  --> receive data = 00
316 
# In  --> receive data = 00
317 
# In  --> receive data = 00
318 
# In  --> receive data = 00
319 
# In  --> receive data = ff
320 
# In  --> StopTime = x, SE0StartTime = x
321 
# In  --> receive data = db
322 
# In  --> StopTime = x, SE0StartTime = x
323 
# In  --> EOP asserted for 2 bit time at time 211838000
324 
# In  --> Data toggle recevied is 1001011 at time 211922000
325 
# In  --> received byte[1] = 00000000
326 
# In  --> received byte[2] = 00000000
327 
# In  --> received byte[3] = 00000000
328 
# In  --> received byte[4] = 00000000
329 
# In  --> calculated crc is 24 at time 211922000.
330 
# In  --> received raw crc is 24 at time 211922000.
331 
# In  --> received crc is ffdb at time 211922000.
332 
# In  --> tmpCrc ffdb, at time 211922000
333 
# In  --> sending ACK at time 213822000
334 
# RecvBuffer[0]  = 00000000  : 0
335 
# RecvBuffer[1]  = 00000000  : 0
336 
# RecvBuffer[2]  = 00000000  : 0
337 
# RecvBuffer[3]  = 00000000  : 0
338 
# In  --> In task wait for response at time 220374000
339 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 220658000
340 
# In  --> Decoder enabled at time 221385000 in host
341 
# In  --> StopTime = x, SE0StartTime = x
342 
# In  --> receive data = d2
343 
# In  --> StopTime = x, SE0StartTime = x
344 
# In  --> EOP asserted for 2 bit time at time 222170000
345 
# CntrlTransType = 10
346 
# In  --> In task wait for response at time 234066000
347 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 234350000
348 
# In  --> Decoder enabled at time 235077000 in host
349 
# In  --> StopTime = x, SE0StartTime = x
350 
# In  --> receive data = d2
351 
# In  --> StopTime = x, SE0StartTime = x
352 
# In  --> EOP asserted for 2 bit time at time 235862000
353 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
354 
# CntrlTransType = 10
355 
# In  --> In task wait for response at time 239022000
356 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 239390000
357 
# In  --> Decoder enabled at time 240117000 in host
358 
# In  --> receive data = 4b
359 
# In  --> receive data = 00
360 
# In  --> receive data = 00
361 
# In  --> receive data = 00
362 
# In  --> receive data = 24
363 
# In  --> receive data = ff
364 
# In  --> StopTime = x, SE0StartTime = x
365 
# In  --> receive data = c0
366 
# In  --> StopTime = x, SE0StartTime = x
367 
# In  --> EOP asserted for 2 bit time at time 244997000
368 
# In  --> Data toggle recevied is 1001011 at time 245081000
369 
# In  --> received byte[1] = 00000000
370 
# In  --> received byte[2] = 00000000
371 
# In  --> received byte[3] = 00000000
372 
# In  --> received byte[4] = 00100100
373 
# In  --> calculated crc is fc at time 245081000.
374 
# In  --> received raw crc is fc at time 245081000.
375 
# In  --> received crc is ffc0 at time 245081000.
376 
# In  --> tmpCrc ffc0, at time 245081000
377 
# ... Write data 81 to UART done cnt :          2 ...
378 
#
379 
#
380 
# ... Writing char   9 ...
381 
# In  --> sending ACK at time 247002000
382 
# RecvBuffer[0]  = 00000000  : 0
383 
# RecvBuffer[1]  = 00000000  : 0
384 
# RecvBuffer[2]  = 00000000  : 0
385 
# RecvBuffer[3]  = 00100100  : 36
386 
# In  --> In task wait for response at time 253554000
387 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 253859000
388 
# In  --> Decoder enabled at time 254560000 in host
389 
# In  --> StopTime = x, SE0StartTime = x
390 
# In  --> receive data = d2
391 
# In  --> StopTime = x, SE0StartTime = x
392 
# In  --> EOP asserted for 2 bit time at time 255371000
393 
# CntrlTransType = 11
394 
# In  --> In task wait for response at time 267246000
395 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 267551000
396 
# In  --> Decoder enabled at time 268251000 in host
397 
# In  --> StopTime = x, SE0StartTime = x
398 
# In  --> receive data = d2
399 
# In  --> StopTime = x, SE0StartTime = x
400 
# In  --> EOP asserted for 2 bit time at time 269063000
401 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
402 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
403 
# In  --> DataToggle is 1
404 
# In  --> DataToggle is 4b at time 272286000.
405 
# In  --> sending byte[1] = 00000000
406 
# In  --> sending byte[2] = 00000000
407 
# In  --> sending byte[3] = 00000000
408 
# In  --> sending byte[4] = 00100100
409 
# In  --> raw crc is fc at time              272286
410 
# In  --> sent crc is ffc0 at time              272286
411 
# In  --> In task wait for response at time 278334000
412 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 278639000
413 
# In  --> Decoder enabled at time 279341000 in host
414 
# In  --> StopTime = x, SE0StartTime = x
415 
# In  --> receive data = d2
416 
# In  --> StopTime = x, SE0StartTime = x
417 
# In  --> EOP asserted for 2 bit time at time 280151000
418 
# In  --> bits received are 7
419 
# In  --> ACK received at time 280151000.
420 
# Input Address:01, EndPt:0
421 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
422 
# In  CntrlTransType = 11, WRITE = 11
423 
# In  --> In task wait for response at time 283374000
424 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 283763000
425 
# In  --> Decoder enabled at time 284465000 in host
426 
# In  --> receive data = 4b
427 
# In  --> receive data = 00
428 
# In  --> StopTime = x, SE0StartTime = x
429 
# In  --> receive data = 00
430 
# In  --> StopTime = x, SE0StartTime = x
431 
# In  --> EOP asserted for 2 bit time at time 286598000
432 
#
433 
# ... Reading the UART Status: 00000026 ...
434 
# CntrlTransType = 10
435 
# In  --> In task wait for response at time 300426000
436 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 300710000
437 
# In  --> Decoder enabled at time 301429000 in host
438 
# In  --> StopTime = x, SE0StartTime = x
439 
# In  --> receive data = d2
440 
# In  --> StopTime = x, SE0StartTime = x
441 
# In  --> EOP asserted for 2 bit time at time 302222000
442 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
443 
# CntrlTransType = 10
444 
# In  --> In task wait for response at time 305382000
445 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 305750000
446 
# In  --> Decoder enabled at time 306475000 in host
447 
# In  --> receive data = 4b
448 
# In  --> receive data = 00
449 
# In  --> receive data = 00
450 
# In  --> receive data = 00
451 
# ... Write data 09 to UART done cnt :          3 ...
452 
#
453 
#
454 
# ... Writing char  99 ...
455 
# In  --> receive data = 00
456 
# In  --> receive data = ff
457 
# In  --> StopTime = x, SE0StartTime = x
458 
# In  --> receive data = db
459 
# In  --> StopTime = x, SE0StartTime = x
460 
# In  --> EOP asserted for 2 bit time at time 311357000
461 
# In  --> Data toggle recevied is 1001011 at time 311441000
462 
# In  --> received byte[1] = 00000000
463 
# In  --> received byte[2] = 00000000
464 
# In  --> received byte[3] = 00000000
465 
# In  --> received byte[4] = 00000000
466 
# In  --> calculated crc is 24 at time 311441000.
467 
# In  --> received raw crc is 24 at time 311441000.
468 
# In  --> received crc is ffdb at time 311441000.
469 
# In  --> tmpCrc ffdb, at time 311441000
470 
# In  --> sending ACK at time 313362000
471 
# RecvBuffer[0]  = 00000000  : 0
472 
# RecvBuffer[1]  = 00000000  : 0
473 
# RecvBuffer[2]  = 00000000  : 0
474 
# RecvBuffer[3]  = 00000000  : 0
475 
# In  --> In task wait for response at time 319914000
476 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 320219000
477 
# In  --> Decoder enabled at time 320917000 in host
478 
# In  --> StopTime = x, SE0StartTime = x
479 
# In  --> receive data = d2
480 
# In  --> StopTime = x, SE0StartTime = x
481 
# In  --> EOP asserted for 2 bit time at time 321710000
482 
# CntrlTransType = 10
483 
# In  --> In task wait for response at time 333606000
484 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 333890000
485 
# In  --> Decoder enabled at time 334609000 in host
486 
# In  --> StopTime = x, SE0StartTime = x
487 
# In  --> receive data = d2
488 
# In  --> StopTime = x, SE0StartTime = x
489 
# In  --> EOP asserted for 2 bit time at time 335402000
490 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
491 
# CntrlTransType = 10
492 
# In  --> In task wait for response at time 338562000
493 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 338930000
494 
# In  --> Decoder enabled at time 339652000 in host
495 
# In  --> receive data = 4b
496 
# In  --> receive data = 00
497 
# In  --> receive data = 00
498 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  24
499 
# ... Read Data from UART done cnt :         1...
500 
# In  --> receive data = 00
501 
# In  --> receive data = 81
502 
# In  --> receive data = 3f
503 
# In  --> StopTime = x, SE0StartTime = x
504 
# In  --> receive data = bb
505 
# In  --> StopTime = x, SE0StartTime = x
506 
# In  --> EOP asserted for 2 bit time at time 344537000
507 
# In  --> Data toggle recevied is 1001011 at time 344621000
508 
# In  --> received byte[1] = 00000000
509 
# In  --> received byte[2] = 00000000
510 
# In  --> received byte[3] = 00000000
511 
# In  --> received byte[4] = 10000001
512 
# In  --> calculated crc is 322 at time 344621000.
513 
# In  --> received raw crc is 322 at time 344621000.
514 
# In  --> received crc is 3fbb at time 344621000.
515 
# In  --> tmpCrc 3fbb, at time 344621000
516 
# In  --> sending ACK at time 346542000
517 
# RecvBuffer[0]  = 00000000  : 0
518 
# RecvBuffer[1]  = 00000000  : 0
519 
# RecvBuffer[2]  = 00000000  : 0
520 
# RecvBuffer[3]  = 10000001  : 129
521 
# In  --> In task wait for response at time 353094000
522 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 353399000
523 
# In  --> Decoder enabled at time 354115000 in host
524 
# In  --> StopTime = x, SE0StartTime = x
525 
# In  --> receive data = d2
526 
# In  --> StopTime = x, SE0StartTime = x
527 
# In  --> EOP asserted for 2 bit time at time 354911000
528 
# CntrlTransType = 11
529 
# In  --> In task wait for response at time 366786000
530 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 367091000
531 
# In  --> Decoder enabled at time 367807000 in host
532 
# In  --> StopTime = x, SE0StartTime = x
533 
# In  --> receive data = d2
534 
# In  --> StopTime = x, SE0StartTime = x
535 
# In  --> EOP asserted for 2 bit time at time 368603000
536 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
537 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
538 
# In  --> DataToggle is 1
539 
# In  --> DataToggle is 4b at time 371826000.
540 
# In  --> sending byte[1] = 00000000
541 
# In  --> sending byte[2] = 00000000
542 
# In  --> sending byte[3] = 00000000
543 
# In  --> sending byte[4] = 10000001
544 
# In  --> raw crc is 322 at time              371826
545 
# In  --> sent crc is 3fbb at time              371826
546 
# ... Write data 63 to UART done cnt :          4 ...
547 
#
548 
#
549 
# ... Writing char  13 ...
550 
# In  --> In task wait for response at time 377874000
551 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 378179000
552 
# In  --> Decoder enabled at time 378894000 in host
553 
# In  --> StopTime = x, SE0StartTime = x
554 
# In  --> receive data = d2
555 
# In  --> StopTime = x, SE0StartTime = x
556 
# In  --> EOP asserted for 2 bit time at time 379691000
557 
# In  --> bits received are 7
558 
# In  --> ACK received at time 379691000.
559 
# Input Address:01, EndPt:0
560 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
561 
# In  CntrlTransType = 11, WRITE = 11
562 
# In  --> In task wait for response at time 382914000
563 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 383303000
564 
# In  --> Decoder enabled at time 384018000 in host
565 
# In  --> receive data = 4b
566 
# In  --> receive data = 00
567 
# In  --> StopTime = x, SE0StartTime = x
568 
# In  --> receive data = 00
569 
# In  --> StopTime = x, SE0StartTime = x
570 
# In  --> EOP asserted for 2 bit time at time 386159000
571 
#
572 
# ... Reading the UART Status: 00000083 ...
573 
# CntrlTransType = 10
574 
# In  --> In task wait for response at time 399966000
575 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 400271000
576 
# In  --> Decoder enabled at time 400981000 in host
577 
# In  --> StopTime = x, SE0StartTime = x
578 
# In  --> receive data = d2
579 
# In  --> StopTime = x, SE0StartTime = x
580 
# In  --> EOP asserted for 2 bit time at time 401783000
581 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
582 
# CntrlTransType = 10
583 
# In  --> In task wait for response at time 404922000
584 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 405311000
585 
# In  --> Decoder enabled at time 406025000 in host
586 
# In  --> receive data = 4b
587 
# In  --> receive data = 00
588 
# In  --> receive data = 00
589 
# In  --> receive data = 00
590 
# In  --> receive data = 00
591 
# In  --> receive data = ff
592 
# In  --> StopTime = x, SE0StartTime = x
593 
# In  --> receive data = db
594 
# In  --> StopTime = x, SE0StartTime = x
595 
# In  --> EOP asserted for 2 bit time at time 410918000
596 
# In  --> Data toggle recevied is 1001011 at time 411002000
597 
# In  --> received byte[1] = 00000000
598 
# In  --> received byte[2] = 00000000
599 
# In  --> received byte[3] = 00000000
600 
# In  --> received byte[4] = 00000000
601 
# In  --> calculated crc is 24 at time 411002000.
602 
# In  --> received raw crc is 24 at time 411002000.
603 
# In  --> received crc is ffdb at time 411002000.
604 
# In  --> tmpCrc ffdb, at time 411002000
605 
# In  --> sending ACK at time 412902000
606 
# RecvBuffer[0]  = 00000000  : 0
607 
# RecvBuffer[1]  = 00000000  : 0
608 
# RecvBuffer[2]  = 00000000  : 0
609 
# RecvBuffer[3]  = 00000000  : 0
610 
# In  --> In task wait for response at time 419454000
611 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 419738000
612 
# In  --> Decoder enabled at time 420467000 in host
613 
# In  --> StopTime = x, SE0StartTime = x
614 
# In  --> receive data = d2
615 
# In  --> StopTime = x, SE0StartTime = x
616 
# In  --> EOP asserted for 2 bit time at time 421271000
617 
# CntrlTransType = 10
618 
# In  --> In task wait for response at time 433146000
619 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 433451000
620 
# In  --> Decoder enabled at time 434159000 in host
621 
# In  --> StopTime = x, SE0StartTime = x
622 
# In  --> receive data = d2
623 
# In  --> StopTime = x, SE0StartTime = x
624 
# In  --> EOP asserted for 2 bit time at time 434963000
625 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
626 
# CntrlTransType = 10
627 
# ... Write data 0d to UART done cnt :          5 ...
628 
#
629 
#
630 
# ... Writing char 141 ...
631 
# In  --> In task wait for response at time 438102000
632 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 438491000
633 
# In  --> Decoder enabled at time 439202000 in host
634 
# In  --> receive data = 4b
635 
# In  --> receive data = 00
636 
# In  --> receive data = 00
637 
# In  --> receive data = 00
638 
# In  --> receive data = 09
639 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  81
640 
# ... Read Data from UART done cnt :         2...
641 
# In  --> receive data = 3f
642 
# In  --> StopTime = x, SE0StartTime = x
643 
# In  --> receive data = dd
644 
# In  --> StopTime = x, SE0StartTime = x
645 
# In  --> EOP asserted for 2 bit time at time 444098000
646 
# In  --> Data toggle recevied is 1001011 at time 444182000
647 
# In  --> received byte[1] = 00000000
648 
# In  --> received byte[2] = 00000000
649 
# In  --> received byte[3] = 00000000
650 
# In  --> received byte[4] = 00001001
651 
# In  --> calculated crc is 344 at time 444182000.
652 
# In  --> received raw crc is 344 at time 444182000.
653 
# In  --> received crc is 3fdd at time 444182000.
654 
# In  --> tmpCrc 3fdd, at time 444182000
655 
# In  --> sending ACK at time 446082000
656 
# RecvBuffer[0]  = 00000000  : 0
657 
# RecvBuffer[1]  = 00000000  : 0
658 
# RecvBuffer[2]  = 00000000  : 0
659 
# RecvBuffer[3]  = 00001001  : 9
660 
# In  --> In task wait for response at time 452634000
661 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 452918000
662 
# In  --> Decoder enabled at time 453647000 in host
663 
# In  --> StopTime = x, SE0StartTime = x
664 
# In  --> receive data = d2
665 
# In  --> StopTime = x, SE0StartTime = x
666 
# In  --> EOP asserted for 2 bit time at time 454430000
667 
# CntrlTransType = 11
668 
# In  --> In task wait for response at time 466326000
669 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 466610000
670 
# In  --> Decoder enabled at time 467336000 in host
671 
# In  --> StopTime = x, SE0StartTime = x
672 
# In  --> receive data = d2
673 
# In  --> StopTime = x, SE0StartTime = x
674 
# In  --> EOP asserted for 2 bit time at time 468122000
675 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
676 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
677 
# In  --> DataToggle is 1
678 
# In  --> DataToggle is 4b at time 471366000.
679 
# In  --> sending byte[1] = 00000000
680 
# In  --> sending byte[2] = 00000000
681 
# In  --> sending byte[3] = 00000000
682 
# In  --> sending byte[4] = 00001001
683 
# In  --> raw crc is 344 at time              471366
684 
# In  --> sent crc is 3fdd at time              471366
685 
# In  --> In task wait for response at time 477414000
686 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 477698000
687 
# In  --> Decoder enabled at time 478423000 in host
688 
# In  --> StopTime = x, SE0StartTime = x
689 
# In  --> receive data = d2
690 
# In  --> StopTime = x, SE0StartTime = x
691 
# In  --> EOP asserted for 2 bit time at time 479210000
692 
# In  --> bits received are 7
693 
# In  --> ACK received at time 479210000.
694 
# Input Address:01, EndPt:0
695 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
696 
# In  CntrlTransType = 11, WRITE = 11
697 
# In  --> In task wait for response at time 482454000
698 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 482822000
699 
# In  --> Decoder enabled at time 483549000 in host
700 
# In  --> receive data = 4b
701 
# In  --> receive data = 00
702 
# In  --> StopTime = x, SE0StartTime = x
703 
# In  --> receive data = 00
704 
# In  --> StopTime = x, SE0StartTime = x
705 
# In  --> EOP asserted for 2 bit time at time 485678000
706 
#
707 
# ... Reading the UART Status: 0000000b ...
708 
# CntrlTransType = 10
709 
# In  --> In task wait for response at time 499506000
710 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 499790000
711 
# In  --> Decoder enabled at time 500516000 in host
712 
# In  --> StopTime = x, SE0StartTime = x
713 
# In  --> receive data = d2
714 
# In  --> StopTime = x, SE0StartTime = x
715 
# In  --> EOP asserted for 2 bit time at time 501302000
716 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
717 
# CntrlTransType = 10
718 
# ... Write data 8d to UART done cnt :          6 ...
719 
#
720 
#
721 
# ... Writing char 101 ...
722 
# In  --> In task wait for response at time 504462000
723 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 504830000
724 
# In  --> Decoder enabled at time 505556000 in host
725 
# In  --> receive data = 4b
726 
# In  --> receive data = 00
727 
# In  --> receive data = 00
728 
# In  --> receive data = 00
729 
# In  --> receive data = 00
730 
# In  --> receive data = ff
731 
# In  --> StopTime = x, SE0StartTime = x
732 
# In  --> receive data = db
733 
# In  --> StopTime = x, SE0StartTime = x
734 
# In  --> EOP asserted for 2 bit time at time 510437000
735 
# In  --> Data toggle recevied is 1001011 at time 510521000
736 
# In  --> received byte[1] = 00000000
737 
# In  --> received byte[2] = 00000000
738 
# In  --> received byte[3] = 00000000
739 
# In  --> received byte[4] = 00000000
740 
# In  --> calculated crc is 24 at time 510521000.
741 
# In  --> received raw crc is 24 at time 510521000.
742 
# In  --> received crc is ffdb at time 510521000.
743 
# In  --> tmpCrc ffdb, at time 510521000
744 
# In  --> sending ACK at time 512442000
745 
# RecvBuffer[0]  = 00000000  : 0
746 
# RecvBuffer[1]  = 00000000  : 0
747 
# RecvBuffer[2]  = 00000000  : 0
748 
# RecvBuffer[3]  = 00000000  : 0
749 
# In  --> In task wait for response at time 518994000
750 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 519299000
751 
# In  --> Decoder enabled at time 519999000 in host
752 
# In  --> StopTime = x, SE0StartTime = x
753 
# In  --> receive data = d2
754 
# In  --> StopTime = x, SE0StartTime = x
755 
# In  --> EOP asserted for 2 bit time at time 520811000
756 
# CntrlTransType = 10
757 
# In  --> In task wait for response at time 532686000
758 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 532991000
759 
# In  --> Decoder enabled at time 533690000 in host
760 
# In  --> StopTime = x, SE0StartTime = x
761 
# In  --> receive data = d2
762 
# In  --> StopTime = x, SE0StartTime = x
763 
# In  --> EOP asserted for 2 bit time at time 534503000
764 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
765 
# CntrlTransType = 10
766 
# In  --> In task wait for response at time 537642000
767 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 538031000
768 
# In  --> Decoder enabled at time 538734000 in host
769 
# In  --> receive data = 4b
770 
# In  --> receive data = 00
771 
# In  --> receive data = 00
772 
# In  --> receive data = 00
773 
# In  --> receive data = 63
774 
# In  --> receive data = bf
775 
# In  --> StopTime = x, SE0StartTime = x
776 
# In  --> receive data = f2
777 
# In  --> StopTime = x, SE0StartTime = x
778 
# In  --> EOP asserted for 2 bit time at time 543617000
779 
# In  --> Data toggle recevied is 1001011 at time 543701000
780 
# In  --> received byte[1] = 00000000
781 
# In  --> received byte[2] = 00000000
782 
# In  --> received byte[3] = 00000000
783 
# In  --> received byte[4] = 01100011
784 
# In  --> calculated crc is 2b0 at time 543701000.
785 
# In  --> received raw crc is 2b0 at time 543701000.
786 
# In  --> received crc is bff2 at time 543701000.
787 
# In  --> tmpCrc bff2, at time 543701000
788 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  09
789 
# ... Read Data from UART done cnt :         3...
790 
# In  --> sending ACK at time 545622000
791 
# RecvBuffer[0]  = 00000000  : 0
792 
# RecvBuffer[1]  = 00000000  : 0
793 
# RecvBuffer[2]  = 00000000  : 0
794 
# RecvBuffer[3]  = 01100011  : 99
795 
# In  --> In task wait for response at time 552174000
796 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 552479000
797 
# In  --> Decoder enabled at time 553176000 in host
798 
# In  --> StopTime = x, SE0StartTime = x
799 
# In  --> receive data = d2
800 
# In  --> StopTime = x, SE0StartTime = x
801 
# In  --> EOP asserted for 2 bit time at time 553970000
802 
# ... Write data 65 to UART done cnt :          7 ...
803 
#
804 
#
805 
# ... Writing char  18 ...
806 
# CntrlTransType = 11
807 
# In  --> In task wait for response at time 565866000
808 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 566150000
809 
# In  --> Decoder enabled at time 566868000 in host
810 
# In  --> StopTime = x, SE0StartTime = x
811 
# In  --> receive data = d2
812 
# In  --> StopTime = x, SE0StartTime = x
813 
# In  --> EOP asserted for 2 bit time at time 567662000
814 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
815 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
816 
# In  --> DataToggle is 1
817 
# In  --> DataToggle is 4b at time 570906000.
818 
# In  --> sending byte[1] = 00000000
819 
# In  --> sending byte[2] = 00000000
820 
# In  --> sending byte[3] = 00000000
821 
# In  --> sending byte[4] = 01100011
822 
# In  --> raw crc is 2b0 at time              570906
823 
# In  --> sent crc is bff2 at time              570906
824 
# In  --> In task wait for response at time 576954000
825 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 577238000
826 
# In  --> Decoder enabled at time 577955000 in host
827 
# In  --> StopTime = x, SE0StartTime = x
828 
# In  --> receive data = d2
829 
# In  --> StopTime = x, SE0StartTime = x
830 
# In  --> EOP asserted for 2 bit time at time 578750000
831 
# In  --> bits received are 7
832 
# In  --> ACK received at time 578750000.
833 
# Input Address:01, EndPt:0
834 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
835 
# In  CntrlTransType = 11, WRITE = 11
836 
# In  --> In task wait for response at time 581994000
837 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 582362000
838 
# In  --> Decoder enabled at time 583084000 in host
839 
# In  --> receive data = 4b
840 
# In  --> receive data = 00
841 
# In  --> StopTime = x, SE0StartTime = x
842 
# In  --> receive data = 00
843 
# In  --> StopTime = x, SE0StartTime = x
844 
# In  --> EOP asserted for 2 bit time at time 585218000
845 
#
846 
# ... Reading the UART Status: 00000063 ...
847 
# CntrlTransType = 10
848 
# In  --> In task wait for response at time 599046000
849 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 599330000
850 
# In  --> Decoder enabled at time 600066000 in host
851 
# In  --> StopTime = x, SE0StartTime = x
852 
# In  --> receive data = d2
853 
# In  --> StopTime = x, SE0StartTime = x
854 
# In  --> EOP asserted for 2 bit time at time 600863000
855 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
856 
# CntrlTransType = 10
857 
# In  --> In task wait for response at time 604002000
858 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 604391000
859 
# In  --> Decoder enabled at time 605088000 in host
860 
# In  --> receive data = 4b
861 
# In  --> receive data = 00
862 
# In  --> receive data = 00
863 
# In  --> receive data = 00
864 
# In  --> receive data = 00
865 
# In  --> receive data = ff
866 
# In  --> StopTime = x, SE0StartTime = x
867 
# In  --> receive data = db
868 
# In  --> StopTime = x, SE0StartTime = x
869 
# In  --> EOP asserted for 2 bit time at time 609977000
870 
# In  --> Data toggle recevied is 1001011 at time 610061000
871 
# In  --> received byte[1] = 00000000
872 
# In  --> received byte[2] = 00000000
873 
# In  --> received byte[3] = 00000000
874 
# In  --> received byte[4] = 00000000
875 
# In  --> calculated crc is 24 at time 610061000.
876 
# In  --> received raw crc is 24 at time 610061000.
877 
# In  --> received crc is ffdb at time 610061000.
878 
# In  --> tmpCrc ffdb, at time 610061000
879 
# In  --> sending ACK at time 611982000
880 
# RecvBuffer[0]  = 00000000  : 0
881 
# RecvBuffer[1]  = 00000000  : 0
882 
# RecvBuffer[2]  = 00000000  : 0
883 
# RecvBuffer[3]  = 00000000  : 0
884 
# In  --> In task wait for response at time 618534000
885 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 618839000
886 
# In  --> Decoder enabled at time 619554000 in host
887 
# In  --> StopTime = x, SE0StartTime = x
888 
# In  --> receive data = d2
889 
# In  --> StopTime = x, SE0StartTime = x
890 
# In  --> EOP asserted for 2 bit time at time 620351000
891 
# ... Write data 12 to UART done cnt :          8 ...
892 
#
893 
#
894 
# ... Writing char   1 ...
895 
# CntrlTransType = 10
896 
# In  --> In task wait for response at time 632226000
897 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 632531000
898 
# In  --> Decoder enabled at time 633246000 in host
899 
# In  --> StopTime = x, SE0StartTime = x
900 
# In  --> receive data = d2
901 
# In  --> StopTime = x, SE0StartTime = x
902 
# In  --> EOP asserted for 2 bit time at time 634043000
903 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
904 
# CntrlTransType = 10
905 
# In  --> In task wait for response at time 637182000
906 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 637571000
907 
# In  --> Decoder enabled at time 638266000 in host
908 
# In  --> receive data = 4b
909 
# In  --> receive data = 00
910 
# In  --> receive data = 00
911 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  63
912 
# ... Read Data from UART done cnt :         4...
913 
# In  --> receive data = 00
914 
# In  --> receive data = 0d
915 
# In  --> receive data = 3e
916 
# In  --> StopTime = x, SE0StartTime = x
917 
# In  --> receive data = 1e
918 
# In  --> StopTime = x, SE0StartTime = x
919 
# In  --> EOP asserted for 2 bit time at time 643073000
920 
# In  --> Data toggle recevied is 1001011 at time 643157000
921 
# In  --> received byte[1] = 00000000
922 
# In  --> received byte[2] = 00000000
923 
# In  --> received byte[3] = 00000000
924 
# In  --> received byte[4] = 00001101
925 
# In  --> calculated crc is 8387 at time 643157000.
926 
# In  --> received raw crc is 8387 at time 643157000.
927 
# In  --> received crc is 3e1e at time 643157000.
928 
# In  --> tmpCrc 3e1e, at time 643157000
929 
# In  --> sending ACK at time 645078000
930 
# RecvBuffer[0]  = 00000000  : 0
931 
# RecvBuffer[1]  = 00000000  : 0
932 
# RecvBuffer[2]  = 00000000  : 0
933 
# RecvBuffer[3]  = 00001101  : 13
934 
# In  --> In task wait for response at time 651630000
935 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 651935000
936 
# In  --> Decoder enabled at time 652648000 in host
937 
# In  --> StopTime = x, SE0StartTime = x
938 
# In  --> receive data = d2
939 
# In  --> StopTime = x, SE0StartTime = x
940 
# In  --> EOP asserted for 2 bit time at time 653447000
941 
# CntrlTransType = 11
942 
# In  --> In task wait for response at time 665322000
943 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 665627000
944 
# In  --> Decoder enabled at time 666340000 in host
945 
# In  --> StopTime = x, SE0StartTime = x
946 
# In  --> receive data = d2
947 
# In  --> StopTime = x, SE0StartTime = x
948 
# In  --> EOP asserted for 2 bit time at time 667139000
949 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
950 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
951 
# In  --> DataToggle is 1
952 
# In  --> DataToggle is 4b at time 670362000.
953 
# In  --> sending byte[1] = 00000000
954 
# In  --> sending byte[2] = 00000000
955 
# In  --> sending byte[3] = 00000000
956 
# In  --> sending byte[4] = 00001101
957 
# In  --> raw crc is 8387 at time              670362
958 
# In  --> sent crc is 3e1e at time              670362
959 
# In  --> In task wait for response at time 676326000
960 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 676631000
961 
# In  --> Decoder enabled at time 677341000 in host
962 
# In  --> StopTime = x, SE0StartTime = x
963 
# In  --> receive data = d2
964 
# In  --> StopTime = x, SE0StartTime = x
965 
# In  --> EOP asserted for 2 bit time at time 678143000
966 
# In  --> bits received are 7
967 
# In  --> ACK received at time 678143000.
968 
# Input Address:01, EndPt:0
969 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
970 
# In  CntrlTransType = 11, WRITE = 11
971 
# In  --> In task wait for response at time 681366000
972 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 681671000
973 
# In  --> Decoder enabled at time 682384000 in host
974 
# In  --> receive data = 4b
975 
# In  --> receive data = 00
976 
# In  --> StopTime = x, SE0StartTime = x
977 
# In  --> receive data = 00
978 
# In  --> StopTime = x, SE0StartTime = x
979 
# In  --> EOP asserted for 2 bit time at time 684527000
980 
#
981 
# ... Reading the UART Status: 0000000f ...
982 
# ... Write data 01 to UART done cnt :          9 ...
983 
#
984 
#
985 
# ... Writing char  13 ...
986 
# CntrlTransType = 10
987 
# In  --> In task wait for response at time 698334000
988 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 698639000
989 
# In  --> Decoder enabled at time 699348000 in host
990 
# In  --> StopTime = x, SE0StartTime = x
991 
# In  --> receive data = d2
992 
# In  --> StopTime = x, SE0StartTime = x
993 
# In  --> EOP asserted for 2 bit time at time 700151000
994 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
995 
# CntrlTransType = 10
996 
# In  --> In task wait for response at time 703290000
997 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 703595000
998 
# In  --> Decoder enabled at time 704308000 in host
999 
# In  --> receive data = 4b
1000 
# In  --> receive data = 00
1001 
# In  --> receive data = 00
1002 
# In  --> receive data = 00
1003 
# In  --> receive data = 00
1004 
# In  --> receive data = ff
1005 
# In  --> StopTime = x, SE0StartTime = x
1006 
# In  --> receive data = db
1007 
# In  --> StopTime = x, SE0StartTime = x
1008 
# In  --> EOP asserted for 2 bit time at time 709202000
1009 
# In  --> Data toggle recevied is 1001011 at time 709286000
1010 
# In  --> received byte[1] = 00000000
1011 
# In  --> received byte[2] = 00000000
1012 
# In  --> received byte[3] = 00000000
1013 
# In  --> received byte[4] = 00000000
1014 
# In  --> calculated crc is 24 at time 709286000.
1015 
# In  --> received raw crc is 24 at time 709286000.
1016 
# In  --> received crc is ffdb at time 709286000.
1017 
# In  --> tmpCrc ffdb, at time 709286000
1018 
# In  --> sending ACK at time 711186000
1019 
# RecvBuffer[0]  = 00000000  : 0
1020 
# RecvBuffer[1]  = 00000000  : 0
1021 
# RecvBuffer[2]  = 00000000  : 0
1022 
# RecvBuffer[3]  = 00000000  : 0
1023 
# In  --> In task wait for response at time 717738000
1024 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 718022000
1025 
# In  --> Decoder enabled at time 718750000 in host
1026 
# In  --> StopTime = x, SE0StartTime = x
1027 
# In  --> receive data = d2
1028 
# In  --> StopTime = x, SE0StartTime = x
1029 
# In  --> EOP asserted for 2 bit time at time 719534000
1030 
# CntrlTransType = 10
1031 
# In  --> In task wait for response at time 731430000
1032 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 731714000
1033 
# In  --> Decoder enabled at time 732442000 in host
1034 
# In  --> StopTime = x, SE0StartTime = x
1035 
# In  --> receive data = d2
1036 
# In  --> StopTime = x, SE0StartTime = x
1037 
# In  --> EOP asserted for 2 bit time at time 733226000
1038 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1039 
# CntrlTransType = 10
1040 
# In  --> In task wait for response at time 736386000
1041 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 736754000
1042 
# In  --> Decoder enabled at time 737485000 in host
1043 
# In  --> receive data = 4b
1044 
# In  --> receive data = 00
1045 
# In  --> receive data = 00
1046 
# In  --> receive data = 00
1047 
# In  --> receive data = 8d
1048 
# In  --> receive data = 3f
1049 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  0d
1050 
# ... Read Data from UART done cnt :         5...
1051 
# In  --> StopTime = x, SE0StartTime = x
1052 
# In  --> receive data = be
1053 
# In  --> StopTime = x, SE0StartTime = x
1054 
# In  --> EOP asserted for 2 bit time at time 742382000
1055 
# In  --> Data toggle recevied is 1001011 at time 742466000
1056 
# In  --> received byte[1] = 00000000
1057 
# In  --> received byte[2] = 00000000
1058 
# In  --> received byte[3] = 00000000
1059 
# In  --> received byte[4] = 10001101
1060 
# In  --> calculated crc is 382 at time 742466000.
1061 
# In  --> received raw crc is 382 at time 742466000.
1062 
# In  --> received crc is 3fbe at time 742466000.
1063 
# In  --> tmpCrc 3fbe, at time 742466000
1064 
# In  --> sending ACK at time 744366000
1065 
# RecvBuffer[0]  = 00000000  : 0
1066 
# RecvBuffer[1]  = 00000000  : 0
1067 
# RecvBuffer[2]  = 00000000  : 0
1068 
# RecvBuffer[3]  = 10001101  : 141
1069 
# In  --> In task wait for response at time 750918000
1070 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 751202000
1071 
# In  --> Decoder enabled at time 751930000 in host
1072 
# In  --> StopTime = x, SE0StartTime = x
1073 
# In  --> receive data = d2
1074 
# In  --> StopTime = x, SE0StartTime = x
1075 
# In  --> EOP asserted for 2 bit time at time 752714000
1076 
# ... Write data 0d to UART done cnt :         10 ...
1077 
#
1078 
#
1079 
# ... Writing char 118 ...
1080 
# CntrlTransType = 11
1081 
# In  --> In task wait for response at time 764610000
1082 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 764894000
1083 
# In  --> Decoder enabled at time 765619000 in host
1084 
# In  --> StopTime = x, SE0StartTime = x
1085 
# In  --> receive data = d2
1086 
# In  --> StopTime = x, SE0StartTime = x
1087 
# In  --> EOP asserted for 2 bit time at time 766406000
1088 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1089 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
1090 
# In  --> DataToggle is 1
1091 
# In  --> DataToggle is 4b at time 769650000.
1092 
# In  --> sending byte[1] = 00000000
1093 
# In  --> sending byte[2] = 00000000
1094 
# In  --> sending byte[3] = 00000000
1095 
# In  --> sending byte[4] = 10001101
1096 
# In  --> raw crc is 382 at time              769650
1097 
# In  --> sent crc is 3fbe at time              769650
1098 
# In  --> In task wait for response at time 775698000
1099 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 775982000
1100 
# In  --> Decoder enabled at time 776706000 in host
1101 
# In  --> StopTime = x, SE0StartTime = x
1102 
# In  --> receive data = d2
1103 
# In  --> StopTime = x, SE0StartTime = x
1104 
# In  --> EOP asserted for 2 bit time at time 777494000
1105 
# In  --> bits received are 7
1106 
# In  --> ACK received at time 777494000.
1107 
# Input Address:01, EndPt:0
1108 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
1109 
# In  CntrlTransType = 11, WRITE = 11
1110 
# In  --> In task wait for response at time 780738000
1111 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 781106000
1112 
# In  --> Decoder enabled at time 781832000 in host
1113 
# In  --> receive data = 4b
1114 
# In  --> receive data = 00
1115 
# In  --> StopTime = x, SE0StartTime = x
1116 
# In  --> receive data = 00
1117 
# In  --> StopTime = x, SE0StartTime = x
1118 
# In  --> EOP asserted for 2 bit time at time 783962000
1119 
#
1120 
# ... Reading the UART Status: 0000008f ...
1121 
# CntrlTransType = 10
1122 
# In  --> In task wait for response at time 797790000
1123 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 798074000
1124 
# In  --> Decoder enabled at time 798799000 in host
1125 
# In  --> StopTime = x, SE0StartTime = x
1126 
# In  --> receive data = d2
1127 
# In  --> StopTime = x, SE0StartTime = x
1128 
# In  --> EOP asserted for 2 bit time at time 799586000
1129 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1130 
# CntrlTransType = 10
1131 
# In  --> In task wait for response at time 802746000
1132 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 803114000
1133 
# In  --> Decoder enabled at time 803839000 in host
1134 
# In  --> receive data = 4b
1135 
# In  --> receive data = 00
1136 
# In  --> receive data = 00
1137 
# In  --> receive data = 00
1138 
# In  --> receive data = 00
1139 
# In  --> receive data = ff
1140 
# In  --> StopTime = x, SE0StartTime = x
1141 
# In  --> receive data = db
1142 
# In  --> StopTime = x, SE0StartTime = x
1143 
# In  --> EOP asserted for 2 bit time at time 808721000
1144 
# In  --> Data toggle recevied is 1001011 at time 808805000
1145 
# In  --> received byte[1] = 00000000
1146 
# In  --> received byte[2] = 00000000
1147 
# In  --> received byte[3] = 00000000
1148 
# In  --> received byte[4] = 00000000
1149 
# In  --> calculated crc is 24 at time 808805000.
1150 
# In  --> received raw crc is 24 at time 808805000.
1151 
# In  --> received crc is ffdb at time 808805000.
1152 
# In  --> tmpCrc ffdb, at time 808805000
1153 
# In  --> sending ACK at time 810726000
1154 
# RecvBuffer[0]  = 00000000  : 0
1155 
# RecvBuffer[1]  = 00000000  : 0
1156 
# RecvBuffer[2]  = 00000000  : 0
1157 
# RecvBuffer[3]  = 00000000  : 0
1158 
# In  --> In task wait for response at time 817278000
1159 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 817583000
1160 
# In  --> Decoder enabled at time 818282000 in host
1161 
# In  --> StopTime = x, SE0StartTime = x
1162 
# In  --> receive data = d2
1163 
# In  --> StopTime = x, SE0StartTime = x
1164 
# In  --> EOP asserted for 2 bit time at time 819095000
1165 
# ... Write data 76 to UART done cnt :         11 ...
1166 
#
1167 
#
1168 
# ... Writing char  61 ...
1169 
# CntrlTransType = 10
1170 
# In  --> In task wait for response at time 830970000
1171 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 831275000
1172 
# In  --> Decoder enabled at time 831973000 in host
1173 
# In  --> StopTime = x, SE0StartTime = x
1174 
# In  --> receive data = d2
1175 
# In  --> StopTime = x, SE0StartTime = x
1176 
# In  --> EOP asserted for 2 bit time at time 832787000
1177 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1178 
# CntrlTransType = 10
1179 
# In  --> In task wait for response at time 835926000
1180 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 836315000
1181 
# In  --> Decoder enabled at time 837017000 in host
1182 
# In  --> receive data = 4b
1183 
# In  --> receive data = 00
1184 
# In  --> receive data = 00
1185 
# In  --> receive data = 00
1186 
# In  --> receive data = 65
1187 
# In  --> receive data = 3f
1188 
# In  --> StopTime = x, SE0StartTime = x
1189 
# In  --> receive data = f0
1190 
# In  --> StopTime = x, SE0StartTime = x
1191 
# In  --> EOP asserted for 2 bit time at time 841901000
1192 
# In  --> Data toggle recevied is 1001011 at time 841985000
1193 
# In  --> received byte[1] = 00000000
1194 
# In  --> received byte[2] = 00000000
1195 
# In  --> received byte[3] = 00000000
1196 
# In  --> received byte[4] = 01100101
1197 
# In  --> calculated crc is 3f0 at time 841985000.
1198 
# In  --> received raw crc is 3f0 at time 841985000.
1199 
# In  --> received crc is 3ff0 at time 841985000.
1200 
# In  --> tmpCrc 3ff0, at time 841985000
1201 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  8d
1202 
# ... Read Data from UART done cnt :         6...
1203 
# In  --> sending ACK at time 843906000
1204 
# RecvBuffer[0]  = 00000000  : 0
1205 
# RecvBuffer[1]  = 00000000  : 0
1206 
# RecvBuffer[2]  = 00000000  : 0
1207 
# RecvBuffer[3]  = 01100101  : 101
1208 
# In  --> In task wait for response at time 850458000
1209 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 850763000
1210 
# In  --> Decoder enabled at time 851459000 in host
1211 
# In  --> StopTime = x, SE0StartTime = x
1212 
# In  --> receive data = d2
1213 
# In  --> StopTime = x, SE0StartTime = x
1214 
# In  --> EOP asserted for 2 bit time at time 852254000
1215 
# CntrlTransType = 11
1216 
# In  --> In task wait for response at time 864150000
1217 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 864434000
1218 
# In  --> Decoder enabled at time 865151000 in host
1219 
# In  --> StopTime = x, SE0StartTime = x
1220 
# In  --> receive data = d2
1221 
# In  --> StopTime = x, SE0StartTime = x
1222 
# In  --> EOP asserted for 2 bit time at time 865946000
1223 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1224 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
1225 
# In  --> DataToggle is 1
1226 
# In  --> DataToggle is 4b at time 869190000.
1227 
# In  --> sending byte[1] = 00000000
1228 
# In  --> sending byte[2] = 00000000
1229 
# In  --> sending byte[3] = 00000000
1230 
# In  --> sending byte[4] = 01100101
1231 
# In  --> raw crc is 3f0 at time              869190
1232 
# In  --> sent crc is 3ff0 at time              869190
1233 
# In  --> In task wait for response at time 875238000
1234 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 875522000
1235 
# In  --> Decoder enabled at time 876258000 in host
1236 
# In  --> StopTime = x, SE0StartTime = x
1237 
# In  --> receive data = d2
1238 
# In  --> StopTime = x, SE0StartTime = x
1239 
# In  --> EOP asserted for 2 bit time at time 877055000
1240 
# In  --> bits received are 7
1241 
# In  --> ACK received at time 877055000.
1242 
# Input Address:01, EndPt:0
1243 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
1244 
# In  CntrlTransType = 11, WRITE = 11
1245 
# In  --> In task wait for response at time 880278000
1246 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 880667000
1247 
# In  --> Decoder enabled at time 881367000 in host
1248 
# In  --> receive data = 4b
1249 
# In  --> receive data = 00
1250 
# In  --> StopTime = x, SE0StartTime = x
1251 
# In  --> receive data = 00
1252 
# In  --> StopTime = x, SE0StartTime = x
1253 
# In  --> EOP asserted for 2 bit time at time 883502000
1254 
#
1255 
# ... Reading the UART Status: 00000067 ...
1256 
# ... Write data 3d to UART done cnt :         12 ...
1257 
#
1258 
#
1259 
# ... Writing char 237 ...
1260 
# CntrlTransType = 10
1261 
# In  --> In task wait for response at time 897330000
1262 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 897614000
1263 
# In  --> Decoder enabled at time 898349000 in host
1264 
# In  --> StopTime = x, SE0StartTime = x
1265 
# In  --> receive data = d2
1266 
# In  --> StopTime = x, SE0StartTime = x
1267 
# In  --> EOP asserted for 2 bit time at time 899147000
1268 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1269 
# CntrlTransType = 10
1270 
# In  --> In task wait for response at time 902286000
1271 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 902675000
1272 
# In  --> Decoder enabled at time 903374000 in host
1273 
# In  --> receive data = 4b
1274 
# In  --> receive data = 00
1275 
# In  --> receive data = 00
1276 
# In  --> receive data = 00
1277 
# In  --> receive data = 00
1278 
# In  --> receive data = ff
1279 
# In  --> StopTime = x, SE0StartTime = x
1280 
# In  --> receive data = db
1281 
# In  --> StopTime = x, SE0StartTime = x
1282 
# In  --> EOP asserted for 2 bit time at time 908261000
1283 
# In  --> Data toggle recevied is 1001011 at time 908345000
1284 
# In  --> received byte[1] = 00000000
1285 
# In  --> received byte[2] = 00000000
1286 
# In  --> received byte[3] = 00000000
1287 
# In  --> received byte[4] = 00000000
1288 
# In  --> calculated crc is 24 at time 908345000.
1289 
# In  --> received raw crc is 24 at time 908345000.
1290 
# In  --> received crc is ffdb at time 908345000.
1291 
# In  --> tmpCrc ffdb, at time 908345000
1292 
# In  --> sending ACK at time 910266000
1293 
# RecvBuffer[0]  = 00000000  : 0
1294 
# RecvBuffer[1]  = 00000000  : 0
1295 
# RecvBuffer[2]  = 00000000  : 0
1296 
# RecvBuffer[3]  = 00000000  : 0
1297 
# In  --> In task wait for response at time 916818000
1298 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 917123000
1299 
# In  --> Decoder enabled at time 917837000 in host
1300 
# In  --> StopTime = x, SE0StartTime = x
1301 
# In  --> receive data = d2
1302 
# In  --> StopTime = x, SE0StartTime = x
1303 
# In  --> EOP asserted for 2 bit time at time 918635000
1304 
# CntrlTransType = 10
1305 
# In  --> In task wait for response at time 930510000
1306 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 930815000
1307 
# In  --> Decoder enabled at time 931529000 in host
1308 
# In  --> StopTime = x, SE0StartTime = x
1309 
# In  --> receive data = d2
1310 
# In  --> StopTime = x, SE0StartTime = x
1311 
# In  --> EOP asserted for 2 bit time at time 932327000
1312 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1313 
# CntrlTransType = 10
1314 
# In  --> In task wait for response at time 935466000
1315 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 935855000
1316 
# In  --> Decoder enabled at time 936569000 in host
1317 
# In  --> receive data = 4b
1318 
# In  --> receive data = 00
1319 
# In  --> receive data = 00
1320 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  65
1321 
# ... Read Data from UART done cnt :         7...
1322 
# In  --> receive data = 00
1323 
# In  --> receive data = 12
1324 
# In  --> receive data = 7f
1325 
# In  --> StopTime = x, SE0StartTime = x
1326 
# In  --> receive data = d6
1327 
# In  --> StopTime = x, SE0StartTime = x
1328 
# In  --> EOP asserted for 2 bit time at time 941462000
1329 
# In  --> Data toggle recevied is 1001011 at time 941546000
1330 
# In  --> received byte[1] = 00000000
1331 
# In  --> received byte[2] = 00000000
1332 
# In  --> received byte[3] = 00000000
1333 
# In  --> received byte[4] = 00010010
1334 
# In  --> calculated crc is 194 at time 941546000.
1335 
# In  --> received raw crc is 194 at time 941546000.
1336 
# In  --> received crc is 7fd6 at time 941546000.
1337 
# In  --> tmpCrc 7fd6, at time 941546000
1338 
# In  --> sending ACK at time 943446000
1339 
# RecvBuffer[0]  = 00000000  : 0
1340 
# RecvBuffer[1]  = 00000000  : 0
1341 
# RecvBuffer[2]  = 00000000  : 0
1342 
# RecvBuffer[3]  = 00010010  : 18
1343 
# ... Write data ed to UART done cnt :         13 ...
1344 
#
1345 
#
1346 
# ... Writing char 140 ...
1347 
# In  --> In task wait for response at time 949998000
1348 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 950282000
1349 
# In  --> Decoder enabled at time 951011000 in host
1350 
# In  --> StopTime = x, SE0StartTime = x
1351 
# In  --> receive data = d2
1352 
# In  --> StopTime = x, SE0StartTime = x
1353 
# In  --> EOP asserted for 2 bit time at time 951815000
1354 
# CntrlTransType = 11
1355 
# In  --> In task wait for response at time 963690000
1356 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 963995000
1357 
# In  --> Decoder enabled at time 964703000 in host
1358 
# In  --> StopTime = x, SE0StartTime = x
1359 
# In  --> receive data = d2
1360 
# In  --> StopTime = x, SE0StartTime = x
1361 
# In  --> EOP asserted for 2 bit time at time 965507000
1362 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1363 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
1364 
# In  --> DataToggle is 1
1365 
# In  --> DataToggle is 4b at time 968730000.
1366 
# In  --> sending byte[1] = 00000000
1367 
# In  --> sending byte[2] = 00000000
1368 
# In  --> sending byte[3] = 00000000
1369 
# In  --> sending byte[4] = 00010010
1370 
# In  --> raw crc is 194 at time              968730
1371 
# In  --> sent crc is 7fd6 at time              968730
1372 
# In  --> In task wait for response at time 974778000
1373 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 975083000
1374 
# In  --> Decoder enabled at time 975793000 in host
1375 
# In  --> StopTime = x, SE0StartTime = x
1376 
# In  --> receive data = d2
1377 
# In  --> StopTime = x, SE0StartTime = x
1378 
# In  --> EOP asserted for 2 bit time at time 976595000
1379 
# In  --> bits received are 7
1380 
# In  --> ACK received at time 976595000.
1381 
# Input Address:01, EndPt:0
1382 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
1383 
# In  CntrlTransType = 11, WRITE = 11
1384 
# In  --> In task wait for response at time 979818000
1385 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 980207000
1386 
# In  --> Decoder enabled at time 980917000 in host
1387 
# In  --> receive data = 4b
1388 
# In  --> receive data = 00
1389 
# In  --> StopTime = x, SE0StartTime = x
1390 
# In  --> receive data = 00
1391 
# In  --> StopTime = x, SE0StartTime = x
1392 
# In  --> EOP asserted for 2 bit time at time 983063000
1393 
#
1394 
# ... Reading the UART Status: 00000012 ...
1395 
# CntrlTransType = 10
1396 
# In  --> In task wait for response at time 996870000
1397 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 997175000
1398 
# In  --> Decoder enabled at time 997881000 in host
1399 
# In  --> StopTime = x, SE0StartTime = x
1400 
# In  --> receive data = d2
1401 
# In  --> StopTime = x, SE0StartTime = x
1402 
# In  --> EOP asserted for 2 bit time at time 998687000
1403 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1404 
# CntrlTransType = 10
1405 
# In  --> In task wait for response at time 1001826000
1406 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1002215000
1407 
# In  --> Decoder enabled at time 1002924000 in host
1408 
# In  --> receive data = 4b
1409 
# In  --> receive data = 00
1410 
# In  --> receive data = 00
1411 
# In  --> receive data = 00
1412 
# In  --> receive data = 00
1413 
# In  --> receive data = ff
1414 
# In  --> StopTime = x, SE0StartTime = x
1415 
# In  --> receive data = db
1416 
# In  --> StopTime = x, SE0StartTime = x
1417 
# In  --> EOP asserted for 2 bit time at time 1007822000
1418 
# In  --> Data toggle recevied is 1001011 at time 1007906000
1419 
# In  --> received byte[1] = 00000000
1420 
# In  --> received byte[2] = 00000000
1421 
# In  --> received byte[3] = 00000000
1422 
# In  --> received byte[4] = 00000000
1423 
# In  --> calculated crc is 24 at time 1007906000.
1424 
# In  --> received raw crc is 24 at time 1007906000.
1425 
# In  --> received crc is ffdb at time 1007906000.
1426 
# In  --> tmpCrc ffdb, at time 1007906000
1427 
# In  --> sending ACK at time 1009806000
1428 
# RecvBuffer[0]  = 00000000  : 0
1429 
# RecvBuffer[1]  = 00000000  : 0
1430 
# RecvBuffer[2]  = 00000000  : 0
1431 
# RecvBuffer[3]  = 00000000  : 0
1432 
# ... Write data 8c to UART done cnt :         14 ...
1433 
#
1434 
#
1435 
# ... Writing char 249 ...
1436 
# In  --> In task wait for response at time 1016358000
1437 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1016642000
1438 
# In  --> Decoder enabled at time 1017369000 in host
1439 
# In  --> StopTime = x, SE0StartTime = x
1440 
# In  --> receive data = d2
1441 
# In  --> StopTime = x, SE0StartTime = x
1442 
# In  --> EOP asserted for 2 bit time at time 1018154000
1443 
# CntrlTransType = 10
1444 
# In  --> In task wait for response at time 1030050000
1445 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1030334000
1446 
# In  --> Decoder enabled at time 1031058000 in host
1447 
# In  --> StopTime = x, SE0StartTime = x
1448 
# In  --> receive data = d2
1449 
# In  --> StopTime = x, SE0StartTime = x
1450 
# In  --> EOP asserted for 2 bit time at time 1031846000
1451 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1452 
# CntrlTransType = 10
1453 
# In  --> In task wait for response at time 1035006000
1454 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1035374000
1455 
# In  --> Decoder enabled at time 1036104000 in host
1456 
# In  --> receive data = 4b
1457 
# In  --> receive data = 00
1458 
# In  --> receive data = 00
1459 
# In  --> receive data = 00
1460 
# In  --> receive data = 01
1461 
# In  --> receive data = 3e
1462 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  12
1463 
# ... Read Data from UART done cnt :         8...
1464 
# In  --> StopTime = x, SE0StartTime = x
1465 
# In  --> receive data = 1b
1466 
# In  --> StopTime = x, SE0StartTime = x
1467 
# In  --> EOP asserted for 2 bit time at time 1040897000
1468 
# In  --> Data toggle recevied is 1001011 at time 1040981000
1469 
# In  --> received byte[1] = 00000000
1470 
# In  --> received byte[2] = 00000000
1471 
# In  --> received byte[3] = 00000000
1472 
# In  --> received byte[4] = 00000001
1473 
# In  --> calculated crc is 8327 at time 1040981000.
1474 
# In  --> received raw crc is 8327 at time 1040981000.
1475 
# In  --> received crc is 3e1b at time 1040981000.
1476 
# In  --> tmpCrc 3e1b, at time 1040981000
1477 
# In  --> sending ACK at time 1042902000
1478 
# RecvBuffer[0]  = 00000000  : 0
1479 
# RecvBuffer[1]  = 00000000  : 0
1480 
# RecvBuffer[2]  = 00000000  : 0
1481 
# RecvBuffer[3]  = 00000001  : 1
1482 
# In  --> In task wait for response at time 1049454000
1483 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1049759000
1484 
# In  --> Decoder enabled at time 1050463000 in host
1485 
# In  --> StopTime = x, SE0StartTime = x
1486 
# In  --> receive data = d2
1487 
# In  --> StopTime = x, SE0StartTime = x
1488 
# In  --> EOP asserted for 2 bit time at time 1051271000
1489 
# CntrlTransType = 11
1490 
# In  --> In task wait for response at time 1063146000
1491 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1063451000
1492 
# In  --> Decoder enabled at time 1064152000 in host
1493 
# In  --> StopTime = x, SE0StartTime = x
1494 
# In  --> receive data = d2
1495 
# In  --> StopTime = x, SE0StartTime = x
1496 
# In  --> EOP asserted for 2 bit time at time 1064963000
1497 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1498 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
1499 
# In  --> DataToggle is 1
1500 
# In  --> DataToggle is 4b at time 1068186000.
1501 
# In  --> sending byte[1] = 00000000
1502 
# In  --> sending byte[2] = 00000000
1503 
# In  --> sending byte[3] = 00000000
1504 
# In  --> sending byte[4] = 00000001
1505 
# In  --> raw crc is 8327 at time             1068186
1506 
# In  --> sent crc is 3e1b at time             1068186
1507 
# In  --> In task wait for response at time 1074150000
1508 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1074455000
1509 
# In  --> Decoder enabled at time 1075155000 in host
1510 
# In  --> StopTime = x, SE0StartTime = x
1511 
# In  --> receive data = d2
1512 
# In  --> StopTime = x, SE0StartTime = x
1513 
# In  --> EOP asserted for 2 bit time at time 1075967000
1514 
# In  --> bits received are 7
1515 
# In  --> ACK received at time 1075967000.
1516 
# Input Address:01, EndPt:0
1517 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
1518 
# In  CntrlTransType = 11, WRITE = 11
1519 
# ... Write data f9 to UART done cnt :         15 ...
1520 
#
1521 
#
1522 
# ... Writing char 198 ...
1523 
# In  --> In task wait for response at time 1079190000
1524 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1079579000
1525 
# In  --> Decoder enabled at time 1080285000 in host
1526 
# In  --> receive data = 4b
1527 
# In  --> receive data = 00
1528 
# In  --> StopTime = x, SE0StartTime = x
1529 
# In  --> receive data = 00
1530 
# In  --> StopTime = x, SE0StartTime = x
1531 
# In  --> EOP asserted for 2 bit time at time 1082414000
1532 
#
1533 
# ... Reading the UART Status: 00000003 ...
1534 
# CntrlTransType = 10
1535 
# In  --> In task wait for response at time 1096242000
1536 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1096526000
1537 
# In  --> Decoder enabled at time 1097246000 in host
1538 
# In  --> StopTime = x, SE0StartTime = x
1539 
# In  --> receive data = d2
1540 
# In  --> StopTime = x, SE0StartTime = x
1541 
# In  --> EOP asserted for 2 bit time at time 1098038000
1542 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1543 
# CntrlTransType = 10
1544 
# In  --> In task wait for response at time 1101198000
1545 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1101566000
1546 
# In  --> Decoder enabled at time 1102292000 in host
1547 
# In  --> receive data = 4b
1548 
# In  --> receive data = 00
1549 
# In  --> receive data = 00
1550 
# In  --> receive data = 00
1551 
# In  --> receive data = 00
1552 
# In  --> receive data = ff
1553 
# In  --> StopTime = x, SE0StartTime = x
1554 
# In  --> receive data = db
1555 
# In  --> StopTime = x, SE0StartTime = x
1556 
# In  --> EOP asserted for 2 bit time at time 1107173000
1557 
# In  --> Data toggle recevied is 1001011 at time 1107257000
1558 
# In  --> received byte[1] = 00000000
1559 
# In  --> received byte[2] = 00000000
1560 
# In  --> received byte[3] = 00000000
1561 
# In  --> received byte[4] = 00000000
1562 
# In  --> calculated crc is 24 at time 1107257000.
1563 
# In  --> received raw crc is 24 at time 1107257000.
1564 
# In  --> received crc is ffdb at time 1107257000.
1565 
# In  --> tmpCrc ffdb, at time 1107257000
1566 
# In  --> sending ACK at time 1109178000
1567 
# RecvBuffer[0]  = 00000000  : 0
1568 
# RecvBuffer[1]  = 00000000  : 0
1569 
# RecvBuffer[2]  = 00000000  : 0
1570 
# RecvBuffer[3]  = 00000000  : 0
1571 
# In  --> In task wait for response at time 1115730000
1572 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1116035000
1573 
# In  --> Decoder enabled at time 1116734000 in host
1574 
# In  --> StopTime = x, SE0StartTime = x
1575 
# In  --> receive data = d2
1576 
# In  --> StopTime = x, SE0StartTime = x
1577 
# In  --> EOP asserted for 2 bit time at time 1117526000
1578 
# CntrlTransType = 10
1579 
# In  --> In task wait for response at time 1129422000
1580 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1129706000
1581 
# In  --> Decoder enabled at time 1130426000 in host
1582 
# In  --> StopTime = x, SE0StartTime = x
1583 
# In  --> receive data = d2
1584 
# In  --> StopTime = x, SE0StartTime = x
1585 
# In  --> EOP asserted for 2 bit time at time 1131218000
1586 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1587 
# CntrlTransType = 10
1588 
# In  --> In task wait for response at time 1134378000
1589 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1134746000
1590 
# In  --> Decoder enabled at time 1135466000 in host
1591 
# In  --> receive data = 4b
1592 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  01
1593 
# ... Read Data from UART done cnt :         9...
1594 
# In  --> receive data = 00
1595 
# In  --> receive data = 00
1596 
# In  --> receive data = 00
1597 
# In  --> receive data = 0d
1598 
# In  --> receive data = 3e
1599 
# In  --> StopTime = x, SE0StartTime = x
1600 
# In  --> receive data = 1e
1601 
# In  --> StopTime = x, SE0StartTime = x
1602 
# In  --> EOP asserted for 2 bit time at time 1140269000
1603 
# In  --> Data toggle recevied is 1001011 at time 1140353000
1604 
# In  --> received byte[1] = 00000000
1605 
# In  --> received byte[2] = 00000000
1606 
# In  --> received byte[3] = 00000000
1607 
# In  --> received byte[4] = 00001101
1608 
# In  --> calculated crc is 8387 at time 1140353000.
1609 
# In  --> received raw crc is 8387 at time 1140353000.
1610 
# In  --> received crc is 3e1e at time 1140353000.
1611 
# In  --> tmpCrc 3e1e, at time 1140353000
1612 
# ... Write data c6 to UART done cnt :         16 ...
1613 
#
1614 
#
1615 
# ... Writing char 197 ...
1616 
# In  --> sending ACK at time 1142274000
1617 
# RecvBuffer[0]  = 00000000  : 0
1618 
# RecvBuffer[1]  = 00000000  : 0
1619 
# RecvBuffer[2]  = 00000000  : 0
1620 
# RecvBuffer[3]  = 00001101  : 13
1621 
# In  --> In task wait for response at time 1148826000
1622 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1149131000
1623 
# In  --> Decoder enabled at time 1149846000 in host
1624 
# In  --> StopTime = x, SE0StartTime = x
1625 
# In  --> receive data = d2
1626 
# In  --> StopTime = x, SE0StartTime = x
1627 
# In  --> EOP asserted for 2 bit time at time 1150643000
1628 
# CntrlTransType = 11
1629 
# In  --> In task wait for response at time 1162518000
1630 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1162823000
1631 
# In  --> Decoder enabled at time 1163538000 in host
1632 
# In  --> StopTime = x, SE0StartTime = x
1633 
# In  --> receive data = d2
1634 
# In  --> StopTime = x, SE0StartTime = x
1635 
# In  --> EOP asserted for 2 bit time at time 1164335000
1636 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1637 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
1638 
# In  --> DataToggle is 1
1639 
# In  --> DataToggle is 4b at time 1167558000.
1640 
# In  --> sending byte[1] = 00000000
1641 
# In  --> sending byte[2] = 00000000
1642 
# In  --> sending byte[3] = 00000000
1643 
# In  --> sending byte[4] = 00001101
1644 
# In  --> raw crc is 8387 at time             1167558
1645 
# In  --> sent crc is 3e1e at time             1167558
1646 
# In  --> In task wait for response at time 1173522000
1647 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1173827000
1648 
# In  --> Decoder enabled at time 1174541000 in host
1649 
# In  --> StopTime = x, SE0StartTime = x
1650 
# In  --> receive data = d2
1651 
# In  --> StopTime = x, SE0StartTime = x
1652 
# In  --> EOP asserted for 2 bit time at time 1175339000
1653 
# In  --> bits received are 7
1654 
# In  --> ACK received at time 1175339000.
1655 
# Input Address:01, EndPt:0
1656 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
1657 
# In  CntrlTransType = 11, WRITE = 11
1658 
# In  --> In task wait for response at time 1178562000
1659 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1178951000
1660 
# In  --> Decoder enabled at time 1179650000 in host
1661 
# In  --> receive data = 4b
1662 
# In  --> receive data = 00
1663 
# In  --> StopTime = x, SE0StartTime = x
1664 
# In  --> receive data = 00
1665 
# In  --> StopTime = x, SE0StartTime = x
1666 
# In  --> EOP asserted for 2 bit time at time 1181786000
1667 
#
1668 
# ... Reading the UART Status: 0000000f ...
1669 
# CntrlTransType = 10
1670 
# In  --> In task wait for response at time 1195614000
1671 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1195898000
1672 
# In  --> Decoder enabled at time 1196632000 in host
1673 
# In  --> StopTime = x, SE0StartTime = x
1674 
# In  --> receive data = d2
1675 
# In  --> StopTime = x, SE0StartTime = x
1676 
# In  --> EOP asserted for 2 bit time at time 1197431000
1677 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1678 
# CntrlTransType = 10
1679 
# In  --> In task wait for response at time 1200570000
1680 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1200959000
1681 
# In  --> Decoder enabled at time 1201657000 in host
1682 
# In  --> receive data = 4b
1683 
# In  --> receive data = 00
1684 
# In  --> receive data = 00
1685 
# In  --> receive data = 00
1686 
# In  --> receive data = 00
1687 
# In  --> receive data = ff
1688 
# ... Write data c5 to UART done cnt :         17 ...
1689 
#
1690 
#
1691 
# ... Writing char 170 ...
1692 
# In  --> StopTime = x, SE0StartTime = x
1693 
# In  --> receive data = db
1694 
# In  --> StopTime = x, SE0StartTime = x
1695 
# In  --> EOP asserted for 2 bit time at time 1206545000
1696 
# In  --> Data toggle recevied is 1001011 at time 1206629000
1697 
# In  --> received byte[1] = 00000000
1698 
# In  --> received byte[2] = 00000000
1699 
# In  --> received byte[3] = 00000000
1700 
# In  --> received byte[4] = 00000000
1701 
# In  --> calculated crc is 24 at time 1206629000.
1702 
# In  --> received raw crc is 24 at time 1206629000.
1703 
# In  --> received crc is ffdb at time 1206629000.
1704 
# In  --> tmpCrc ffdb, at time 1206629000
1705 
# In  --> sending ACK at time 1208550000
1706 
# RecvBuffer[0]  = 00000000  : 0
1707 
# RecvBuffer[1]  = 00000000  : 0
1708 
# RecvBuffer[2]  = 00000000  : 0
1709 
# RecvBuffer[3]  = 00000000  : 0
1710 
# In  --> In task wait for response at time 1215102000
1711 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1215407000
1712 
# In  --> Decoder enabled at time 1216120000 in host
1713 
# In  --> StopTime = x, SE0StartTime = x
1714 
# In  --> receive data = d2
1715 
# In  --> StopTime = x, SE0StartTime = x
1716 
# In  --> EOP asserted for 2 bit time at time 1216919000
1717 
# CntrlTransType = 10
1718 
# In  --> In task wait for response at time 1228794000
1719 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1229099000
1720 
# In  --> Decoder enabled at time 1229812000 in host
1721 
# In  --> StopTime = x, SE0StartTime = x
1722 
# In  --> receive data = d2
1723 
# In  --> StopTime = x, SE0StartTime = x
1724 
# In  --> EOP asserted for 2 bit time at time 1230611000
1725 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1726 
# CntrlTransType = 10
1727 
# In  --> In task wait for response at time 1233750000
1728 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1234055000
1729 
# In  --> Decoder enabled at time 1234769000 in host
1730 
# In  --> receive data = 4b
1731 
# In  --> receive data = 00
1732 
# In  --> receive data = 00
1733 
# In  --> receive data = 00
1734 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  0d
1735 
# ... Read Data from UART done cnt :        10...
1736 
# In  --> receive data = 76
1737 
# In  --> receive data = 7e
1738 
# In  --> StopTime = x, SE0StartTime = x
1739 
# In  --> receive data = 3d
1740 
# In  --> StopTime = x, SE0StartTime = x
1741 
# In  --> EOP asserted for 2 bit time at time 1239662000
1742 
# In  --> Data toggle recevied is 1001011 at time 1239746000
1743 
# In  --> received byte[1] = 00000000
1744 
# In  --> received byte[2] = 00000000
1745 
# In  --> received byte[3] = 00000000
1746 
# In  --> received byte[4] = 01110110
1747 
# In  --> calculated crc is 8143 at time 1239746000.
1748 
# In  --> received raw crc is 8143 at time 1239746000.
1749 
# In  --> received crc is 7e3d at time 1239746000.
1750 
# In  --> tmpCrc 7e3d, at time 1239746000
1751 
# In  --> sending ACK at time 1241646000
1752 
# RecvBuffer[0]  = 00000000  : 0
1753 
# RecvBuffer[1]  = 00000000  : 0
1754 
# RecvBuffer[2]  = 00000000  : 0
1755 
# RecvBuffer[3]  = 01110110  : 118
1756 
# In  --> In task wait for response at time 1248198000
1757 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1248482000
1758 
# In  --> Decoder enabled at time 1249214000 in host
1759 
# In  --> StopTime = x, SE0StartTime = x
1760 
# In  --> receive data = d2
1761 
# In  --> StopTime = x, SE0StartTime = x
1762 
# In  --> EOP asserted for 2 bit time at time 1250015000
1763 
# CntrlTransType = 11
1764 
# In  --> In task wait for response at time 1261890000
1765 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1262195000
1766 
# In  --> Decoder enabled at time 1262903000 in host
1767 
# In  --> StopTime = x, SE0StartTime = x
1768 
# In  --> receive data = d2
1769 
# In  --> StopTime = x, SE0StartTime = x
1770 
# In  --> EOP asserted for 2 bit time at time 1263707000
1771 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1772 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
1773 
# In  --> DataToggle is 1
1774 
# In  --> DataToggle is 4b at time 1266930000.
1775 
# In  --> sending byte[1] = 00000000
1776 
# In  --> sending byte[2] = 00000000
1777 
# In  --> sending byte[3] = 00000000
1778 
# In  --> sending byte[4] = 01110110
1779 
# In  --> raw crc is 8143 at time             1266930
1780 
# In  --> sent crc is 7e3d at time             1266930
1781 
# ... Write data aa to UART done cnt :         18 ...
1782 
#
1783 
#
1784 
# ... Writing char 229 ...
1785 
# In  --> In task wait for response at time 1272978000
1786 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1273283000
1787 
# In  --> Decoder enabled at time 1273990000 in host
1788 
# In  --> StopTime = x, SE0StartTime = x
1789 
# In  --> receive data = d2
1790 
# In  --> StopTime = x, SE0StartTime = x
1791 
# In  --> EOP asserted for 2 bit time at time 1274795000
1792 
# In  --> bits received are 7
1793 
# In  --> ACK received at time 1274795000.
1794 
# Input Address:01, EndPt:0
1795 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
1796 
# In  CntrlTransType = 11, WRITE = 11
1797 
# In  --> In task wait for response at time 1278018000
1798 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1278407000
1799 
# In  --> Decoder enabled at time 1279116000 in host
1800 
# In  --> receive data = 4b
1801 
# In  --> receive data = 00
1802 
# In  --> StopTime = x, SE0StartTime = x
1803 
# In  --> receive data = 00
1804 
# In  --> StopTime = x, SE0StartTime = x
1805 
# In  --> EOP asserted for 2 bit time at time 1281263000
1806 
#
1807 
# ... Reading the UART Status: 00000076 ...
1808 
# CntrlTransType = 10
1809 
# In  --> In task wait for response at time 1295070000
1810 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1295375000
1811 
# In  --> Decoder enabled at time 1296083000 in host
1812 
# In  --> StopTime = x, SE0StartTime = x
1813 
# In  --> receive data = d2
1814 
# In  --> StopTime = x, SE0StartTime = x
1815 
# In  --> EOP asserted for 2 bit time at time 1296887000
1816 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1817 
# CntrlTransType = 10
1818 
# In  --> In task wait for response at time 1300026000
1819 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1300415000
1820 
# In  --> Decoder enabled at time 1301123000 in host
1821 
# In  --> receive data = 4b
1822 
# In  --> receive data = 00
1823 
# In  --> receive data = 00
1824 
# In  --> receive data = 00
1825 
# In  --> receive data = 00
1826 
# In  --> receive data = ff
1827 
# In  --> StopTime = x, SE0StartTime = x
1828 
# In  --> receive data = db
1829 
# In  --> StopTime = x, SE0StartTime = x
1830 
# In  --> EOP asserted for 2 bit time at time 1306022000
1831 
# In  --> Data toggle recevied is 1001011 at time 1306106000
1832 
# In  --> received byte[1] = 00000000
1833 
# In  --> received byte[2] = 00000000
1834 
# In  --> received byte[3] = 00000000
1835 
# In  --> received byte[4] = 00000000
1836 
# In  --> calculated crc is 24 at time 1306106000.
1837 
# In  --> received raw crc is 24 at time 1306106000.
1838 
# In  --> received crc is ffdb at time 1306106000.
1839 
# In  --> tmpCrc ffdb, at time 1306106000
1840 
# In  --> sending ACK at time 1308006000
1841 
# RecvBuffer[0]  = 00000000  : 0
1842 
# RecvBuffer[1]  = 00000000  : 0
1843 
# RecvBuffer[2]  = 00000000  : 0
1844 
# RecvBuffer[3]  = 00000000  : 0
1845 
# In  --> In task wait for response at time 1314558000
1846 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1314842000
1847 
# In  --> Decoder enabled at time 1315566000 in host
1848 
# In  --> StopTime = x, SE0StartTime = x
1849 
# In  --> receive data = d2
1850 
# In  --> StopTime = x, SE0StartTime = x
1851 
# In  --> EOP asserted for 2 bit time at time 1316354000
1852 
# CntrlTransType = 10
1853 
# In  --> In task wait for response at time 1328250000
1854 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1328534000
1855 
# In  --> Decoder enabled at time 1329257000 in host
1856 
# In  --> StopTime = x, SE0StartTime = x
1857 
# In  --> receive data = d2
1858 
# In  --> StopTime = x, SE0StartTime = x
1859 
# In  --> EOP asserted for 2 bit time at time 1330046000
1860 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1861 
# CntrlTransType = 10
1862 
# In  --> In task wait for response at time 1333206000
1863 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1333574000
1864 
# ... Write data e5 to UART done cnt :         19 ...
1865 
#
1866 
#
1867 
# ... Writing char 119 ...
1868 
# In  --> Decoder enabled at time 1334301000 in host
1869 
# In  --> receive data = 4b
1870 
# In  --> receive data = 00
1871 
# In  --> receive data = 00
1872 
# In  --> receive data = 00
1873 
# In  --> receive data = 3d
1874 
# In  --> receive data = 3e
1875 
# In  --> StopTime = x, SE0StartTime = x
1876 
# In  --> receive data = 0a
1877 
# In  --> StopTime = x, SE0StartTime = x
1878 
# In  --> EOP asserted for 2 bit time at time 1339097000
1879 
# In  --> Data toggle recevied is 1001011 at time 1339181000
1880 
# In  --> received byte[1] = 00000000
1881 
# In  --> received byte[2] = 00000000
1882 
# In  --> received byte[3] = 00000000
1883 
# In  --> received byte[4] = 00111101
1884 
# In  --> calculated crc is 83af at time 1339181000.
1885 
# In  --> received raw crc is 83af at time 1339181000.
1886 
# In  --> received crc is 3e0a at time 1339181000.
1887 
# In  --> tmpCrc 3e0a, at time 1339181000
1888 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  76
1889 
# ... Read Data from UART done cnt :        11...
1890 
# In  --> sending ACK at time 1341102000
1891 
# RecvBuffer[0]  = 00000000  : 0
1892 
# RecvBuffer[1]  = 00000000  : 0
1893 
# RecvBuffer[2]  = 00000000  : 0
1894 
# RecvBuffer[3]  = 00111101  : 61
1895 
# In  --> In task wait for response at time 1347654000
1896 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1347959000
1897 
# In  --> Decoder enabled at time 1348660000 in host
1898 
# In  --> StopTime = x, SE0StartTime = x
1899 
# In  --> receive data = d2
1900 
# In  --> StopTime = x, SE0StartTime = x
1901 
# In  --> EOP asserted for 2 bit time at time 1349471000
1902 
# CntrlTransType = 11
1903 
# In  --> In task wait for response at time 1361346000
1904 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1361651000
1905 
# In  --> Decoder enabled at time 1362351000 in host
1906 
# In  --> StopTime = x, SE0StartTime = x
1907 
# In  --> receive data = d2
1908 
# In  --> StopTime = x, SE0StartTime = x
1909 
# In  --> EOP asserted for 2 bit time at time 1363163000
1910 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1911 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
1912 
# In  --> DataToggle is 1
1913 
# In  --> DataToggle is 4b at time 1366386000.
1914 
# In  --> sending byte[1] = 00000000
1915 
# In  --> sending byte[2] = 00000000
1916 
# In  --> sending byte[3] = 00000000
1917 
# In  --> sending byte[4] = 00111101
1918 
# In  --> raw crc is 83af at time             1366386
1919 
# In  --> sent crc is 3e0a at time             1366386
1920 
# In  --> In task wait for response at time 1372350000
1921 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1372655000
1922 
# In  --> Decoder enabled at time 1373355000 in host
1923 
# In  --> StopTime = x, SE0StartTime = x
1924 
# In  --> receive data = d2
1925 
# In  --> StopTime = x, SE0StartTime = x
1926 
# In  --> EOP asserted for 2 bit time at time 1374167000
1927 
# In  --> bits received are 7
1928 
# In  --> ACK received at time 1374167000.
1929 
# Input Address:01, EndPt:0
1930 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
1931 
# In  CntrlTransType = 11, WRITE = 11
1932 
# In  --> In task wait for response at time 1377390000
1933 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1377779000
1934 
# In  --> Decoder enabled at time 1378482000 in host
1935 
# In  --> receive data = 4b
1936 
# In  --> receive data = 00
1937 
# In  --> StopTime = x, SE0StartTime = x
1938 
# In  --> receive data = 00
1939 
# In  --> StopTime = x, SE0StartTime = x
1940 
# In  --> EOP asserted for 2 bit time at time 1380614000
1941 
#
1942 
# ... Reading the UART Status: 0000003f ...
1943 
# CntrlTransType = 10
1944 
# In  --> In task wait for response at time 1394442000
1945 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1394726000
1946 
# In  --> Decoder enabled at time 1395445000 in host
1947 
# In  --> StopTime = x, SE0StartTime = x
1948 
# In  --> receive data = d2
1949 
# In  --> StopTime = x, SE0StartTime = x
1950 
# In  --> EOP asserted for 2 bit time at time 1396238000
1951 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
1952 
# CntrlTransType = 10
1953 
# ... Write data 77 to UART done cnt :         20 ...
1954 
#
1955 
#
1956 
# ... Writing char  18 ...
1957 
# In  --> In task wait for response at time 1399398000
1958 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1399766000
1959 
# In  --> Decoder enabled at time 1400489000 in host
1960 
# In  --> receive data = 4b
1961 
# In  --> receive data = 00
1962 
# In  --> receive data = 00
1963 
# In  --> receive data = 00
1964 
# In  --> receive data = 00
1965 
# In  --> receive data = ff
1966 
# In  --> StopTime = x, SE0StartTime = x
1967 
# In  --> receive data = db
1968 
# In  --> StopTime = x, SE0StartTime = x
1969 
# In  --> EOP asserted for 2 bit time at time 1405373000
1970 
# In  --> Data toggle recevied is 1001011 at time 1405457000
1971 
# In  --> received byte[1] = 00000000
1972 
# In  --> received byte[2] = 00000000
1973 
# In  --> received byte[3] = 00000000
1974 
# In  --> received byte[4] = 00000000
1975 
# In  --> calculated crc is 24 at time 1405457000.
1976 
# In  --> received raw crc is 24 at time 1405457000.
1977 
# In  --> received crc is ffdb at time 1405457000.
1978 
# In  --> tmpCrc ffdb, at time 1405457000
1979 
# In  --> sending ACK at time 1407378000
1980 
# RecvBuffer[0]  = 00000000  : 0
1981 
# RecvBuffer[1]  = 00000000  : 0
1982 
# RecvBuffer[2]  = 00000000  : 0
1983 
# RecvBuffer[3]  = 00000000  : 0
1984 
# In  --> In task wait for response at time 1413930000
1985 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1414235000
1986 
# In  --> Decoder enabled at time 1414931000 in host
1987 
# In  --> StopTime = x, SE0StartTime = x
1988 
# In  --> receive data = d2
1989 
# In  --> StopTime = x, SE0StartTime = x
1990 
# In  --> EOP asserted for 2 bit time at time 1415726000
1991 
# CntrlTransType = 10
1992 
# In  --> In task wait for response at time 1427622000
1993 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1427906000
1994 
# In  --> Decoder enabled at time 1428623000 in host
1995 
# In  --> StopTime = x, SE0StartTime = x
1996 
# In  --> receive data = d2
1997 
# In  --> StopTime = x, SE0StartTime = x
1998 
# In  --> EOP asserted for 2 bit time at time 1429418000
1999 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2000 
# CntrlTransType = 10
2001 
# In  --> In task wait for response at time 1432578000
2002 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1432946000
2003 
# In  --> Decoder enabled at time 1433666000 in host
2004 
# In  --> receive data = 4b
2005 
# In  --> receive data = 00
2006 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  3d
2007 
# ... Read Data from UART done cnt :        12...
2008 
# In  --> receive data = 00
2009 
# In  --> receive data = 00
2010 
# In  --> receive data = ed
2011 
# In  --> receive data = 3f
2012 
# In  --> StopTime = x, SE0StartTime = x
2013 
# In  --> receive data = 96
2014 
# In  --> StopTime = x, SE0StartTime = x
2015 
# In  --> EOP asserted for 2 bit time at time 1438553000
2016 
# In  --> Data toggle recevied is 1001011 at time 1438637000
2017 
# In  --> received byte[1] = 00000000
2018 
# In  --> received byte[2] = 00000000
2019 
# In  --> received byte[3] = 00000000
2020 
# In  --> received byte[4] = 11101101
2021 
# In  --> calculated crc is 396 at time 1438637000.
2022 
# In  --> received raw crc is 396 at time 1438637000.
2023 
# In  --> received crc is 3f96 at time 1438637000.
2024 
# In  --> tmpCrc 3f96, at time 1438637000
2025 
# In  --> sending ACK at time 1440558000
2026 
# RecvBuffer[0]  = 00000000  : 0
2027 
# RecvBuffer[1]  = 00000000  : 0
2028 
# RecvBuffer[2]  = 00000000  : 0
2029 
# RecvBuffer[3]  = 11101101  : 237
2030 
# In  --> In task wait for response at time 1447110000
2031 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1447415000
2032 
# In  --> Decoder enabled at time 1448129000 in host
2033 
# In  --> StopTime = x, SE0StartTime = x
2034 
# In  --> receive data = d2
2035 
# In  --> StopTime = x, SE0StartTime = x
2036 
# In  --> EOP asserted for 2 bit time at time 1448927000
2037 
# CntrlTransType = 11
2038 
# In  --> In task wait for response at time 1460802000
2039 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1461107000
2040 
# In  --> Decoder enabled at time 1461821000 in host
2041 
# ... Write data 12 to UART done cnt :         21 ...
2042 
#
2043 
#
2044 
# ... Writing char 143 ...
2045 
# In  --> StopTime = x, SE0StartTime = x
2046 
# In  --> receive data = d2
2047 
# In  --> StopTime = x, SE0StartTime = x
2048 
# In  --> EOP asserted for 2 bit time at time 1462619000
2049 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2050 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
2051 
# In  --> DataToggle is 1
2052 
# In  --> DataToggle is 4b at time 1465842000.
2053 
# In  --> sending byte[1] = 00000000
2054 
# In  --> sending byte[2] = 00000000
2055 
# In  --> sending byte[3] = 00000000
2056 
# In  --> sending byte[4] = 11101101
2057 
# In  --> raw crc is 396 at time             1465842
2058 
# In  --> sent crc is 3f96 at time             1465842
2059 
# In  --> In task wait for response at time 1471890000
2060 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1472195000
2061 
# In  --> Decoder enabled at time 1472908000 in host
2062 
# In  --> StopTime = x, SE0StartTime = x
2063 
# In  --> receive data = d2
2064 
# In  --> StopTime = x, SE0StartTime = x
2065 
# In  --> EOP asserted for 2 bit time at time 1473707000
2066 
# In  --> bits received are 7
2067 
# In  --> ACK received at time 1473707000.
2068 
# Input Address:01, EndPt:0
2069 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
2070 
# In  CntrlTransType = 11, WRITE = 11
2071 
# In  --> In task wait for response at time 1476930000
2072 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1477319000
2073 
# In  --> Decoder enabled at time 1478013000 in host
2074 
# In  --> receive data = 4b
2075 
# In  --> receive data = 00
2076 
# In  --> StopTime = x, SE0StartTime = x
2077 
# In  --> receive data = 00
2078 
# In  --> StopTime = x, SE0StartTime = x
2079 
# In  --> EOP asserted for 2 bit time at time 1480154000
2080 
#
2081 
# ... Reading the UART Status: 000000ef ...
2082 
# CntrlTransType = 10
2083 
# In  --> In task wait for response at time 1493982000
2084 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1494266000
2085 
# In  --> Decoder enabled at time 1495001000 in host
2086 
# In  --> StopTime = x, SE0StartTime = x
2087 
# In  --> receive data = d2
2088 
# In  --> StopTime = x, SE0StartTime = x
2089 
# In  --> EOP asserted for 2 bit time at time 1495799000
2090 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2091 
# CntrlTransType = 10
2092 
# In  --> In task wait for response at time 1498938000
2093 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1499327000
2094 
# In  --> Decoder enabled at time 1500044000 in host
2095 
# In  --> receive data = 4b
2096 
# In  --> receive data = 00
2097 
# In  --> receive data = 00
2098 
# In  --> receive data = 00
2099 
# In  --> receive data = 00
2100 
# In  --> receive data = ff
2101 
# In  --> StopTime = x, SE0StartTime = x
2102 
# In  --> receive data = db
2103 
# In  --> StopTime = x, SE0StartTime = x
2104 
# In  --> EOP asserted for 2 bit time at time 1504934000
2105 
# In  --> Data toggle recevied is 1001011 at time 1505018000
2106 
# In  --> received byte[1] = 00000000
2107 
# In  --> received byte[2] = 00000000
2108 
# In  --> received byte[3] = 00000000
2109 
# In  --> received byte[4] = 00000000
2110 
# In  --> calculated crc is 24 at time 1505018000.
2111 
# In  --> received raw crc is 24 at time 1505018000.
2112 
# In  --> received crc is ffdb at time 1505018000.
2113 
# In  --> tmpCrc ffdb, at time 1505018000
2114 
# In  --> sending ACK at time 1506918000
2115 
# RecvBuffer[0]  = 00000000  : 0
2116 
# RecvBuffer[1]  = 00000000  : 0
2117 
# RecvBuffer[2]  = 00000000  : 0
2118 
# RecvBuffer[3]  = 00000000  : 0
2119 
# In  --> In task wait for response at time 1513470000
2120 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1513754000
2121 
# In  --> Decoder enabled at time 1514483000 in host
2122 
# In  --> StopTime = x, SE0StartTime = x
2123 
# In  --> receive data = d2
2124 
# In  --> StopTime = x, SE0StartTime = x
2125 
# In  --> EOP asserted for 2 bit time at time 1515287000
2126 
# ... Write data 8f to UART done cnt :         22 ...
2127 
#
2128 
#
2129 
# ... Writing char 242 ...
2130 
# CntrlTransType = 10
2131 
# In  --> In task wait for response at time 1527162000
2132 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1527467000
2133 
# In  --> Decoder enabled at time 1528178000 in host
2134 
# In  --> StopTime = x, SE0StartTime = x
2135 
# In  --> receive data = d2
2136 
# In  --> StopTime = x, SE0StartTime = x
2137 
# In  --> EOP asserted for 2 bit time at time 1528979000
2138 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2139 
# CntrlTransType = 10
2140 
# In  --> In task wait for response at time 1532118000
2141 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1532423000
2142 
# In  --> Decoder enabled at time 1533138000 in host
2143 
# In  --> receive data = 4b
2144 
# In  --> receive data = 00
2145 
# In  --> receive data = 00
2146 
# In  --> receive data = 00
2147 
# In  --> receive data = 8c
2148 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  ed
2149 
# ... Read Data from UART done cnt :        13...
2150 
# In  --> receive data = fe
2151 
# In  --> StopTime = x, SE0StartTime = x
2152 
# In  --> receive data = 7e
2153 
# In  --> StopTime = x, SE0StartTime = x
2154 
# In  --> EOP asserted for 2 bit time at time 1538114000
2155 
# In  --> Data toggle recevied is 1001011 at time 1538198000
2156 
# In  --> received byte[1] = 00000000
2157 
# In  --> received byte[2] = 00000000
2158 
# In  --> received byte[3] = 00000000
2159 
# In  --> received byte[4] = 10001100
2160 
# In  --> calculated crc is 8081 at time 1538198000.
2161 
# In  --> received raw crc is 8081 at time 1538198000.
2162 
# In  --> received crc is fe7e at time 1538198000.
2163 
# In  --> tmpCrc fe7e, at time 1538198000
2164 
# In  --> sending ACK at time 1540098000
2165 
# RecvBuffer[0]  = 00000000  : 0
2166 
# RecvBuffer[1]  = 00000000  : 0
2167 
# RecvBuffer[2]  = 00000000  : 0
2168 
# RecvBuffer[3]  = 10001100  : 140
2169 
# In  --> In task wait for response at time 1546650000
2170 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1546934000
2171 
# In  --> Decoder enabled at time 1547661000 in host
2172 
# In  --> StopTime = x, SE0StartTime = x
2173 
# In  --> receive data = d2
2174 
# In  --> StopTime = x, SE0StartTime = x
2175 
# In  --> EOP asserted for 2 bit time at time 1548446000
2176 
# CntrlTransType = 11
2177 
# In  --> In task wait for response at time 1560342000
2178 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1560626000
2179 
# In  --> Decoder enabled at time 1561353000 in host
2180 
# In  --> StopTime = x, SE0StartTime = x
2181 
# In  --> receive data = d2
2182 
# In  --> StopTime = x, SE0StartTime = x
2183 
# In  --> EOP asserted for 2 bit time at time 1562138000
2184 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2185 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
2186 
# In  --> DataToggle is 1
2187 
# In  --> DataToggle is 4b at time 1565382000.
2188 
# In  --> sending byte[1] = 00000000
2189 
# In  --> sending byte[2] = 00000000
2190 
# In  --> sending byte[3] = 00000000
2191 
# In  --> sending byte[4] = 10001100
2192 
# In  --> raw crc is 8081 at time             1565382
2193 
# In  --> sent crc is fe7e at time             1565382
2194 
# In  --> In task wait for response at time 1571514000
2195 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1571798000
2196 
# In  --> Decoder enabled at time 1572523000 in host
2197 
# In  --> StopTime = x, SE0StartTime = x
2198 
# In  --> receive data = d2
2199 
# In  --> StopTime = x, SE0StartTime = x
2200 
# In  --> EOP asserted for 2 bit time at time 1573310000
2201 
# In  --> bits received are 7
2202 
# In  --> ACK received at time 1573310000.
2203 
# Input Address:01, EndPt:0
2204 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
2205 
# In  CntrlTransType = 11, WRITE = 11
2206 
# In  --> In task wait for response at time 1576554000
2207 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1576922000
2208 
# In  --> Decoder enabled at time 1577649000 in host
2209 
# In  --> receive data = 4b
2210 
# In  --> receive data = 00
2211 
# In  --> StopTime = x, SE0StartTime = x
2212 
# In  --> receive data = 00
2213 
# In  --> StopTime = x, SE0StartTime = x
2214 
# In  --> EOP asserted for 2 bit time at time 1579778000
2215 
#
2216 
# ... Reading the UART Status: 0000008e ...
2217 
# ... Write data f2 to UART done cnt :         23 ...
2218 
#
2219 
#
2220 
# ... Writing char 206 ...
2221 
# CntrlTransType = 10
2222 
# In  --> In task wait for response at time 1593606000
2223 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1593890000
2224 
# In  --> Decoder enabled at time 1594616000 in host
2225 
# In  --> StopTime = x, SE0StartTime = x
2226 
# In  --> receive data = d2
2227 
# In  --> StopTime = x, SE0StartTime = x
2228 
# In  --> EOP asserted for 2 bit time at time 1595402000
2229 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2230 
# CntrlTransType = 10
2231 
# In  --> In task wait for response at time 1598562000
2232 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1598930000
2233 
# In  --> Decoder enabled at time 1599656000 in host
2234 
# In  --> receive data = 4b
2235 
# In  --> receive data = 00
2236 
# In  --> receive data = 00
2237 
# In  --> receive data = 00
2238 
# In  --> receive data = 00
2239 
# In  --> receive data = ff
2240 
# In  --> StopTime = x, SE0StartTime = x
2241 
# In  --> receive data = db
2242 
# In  --> StopTime = x, SE0StartTime = x
2243 
# In  --> EOP asserted for 2 bit time at time 1604537000
2244 
# In  --> Data toggle recevied is 1001011 at time 1604621000
2245 
# In  --> received byte[1] = 00000000
2246 
# In  --> received byte[2] = 00000000
2247 
# In  --> received byte[3] = 00000000
2248 
# In  --> received byte[4] = 00000000
2249 
# In  --> calculated crc is 24 at time 1604621000.
2250 
# In  --> received raw crc is 24 at time 1604621000.
2251 
# In  --> received crc is ffdb at time 1604621000.
2252 
# In  --> tmpCrc ffdb, at time 1604621000
2253 
# In  --> sending ACK at time 1606542000
2254 
# RecvBuffer[0]  = 00000000  : 0
2255 
# RecvBuffer[1]  = 00000000  : 0
2256 
# RecvBuffer[2]  = 00000000  : 0
2257 
# RecvBuffer[3]  = 00000000  : 0
2258 
# In  --> In task wait for response at time 1613094000
2259 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1613399000
2260 
# In  --> Decoder enabled at time 1614099000 in host
2261 
# In  --> StopTime = x, SE0StartTime = x
2262 
# In  --> receive data = d2
2263 
# In  --> StopTime = x, SE0StartTime = x
2264 
# In  --> EOP asserted for 2 bit time at time 1614911000
2265 
# CntrlTransType = 10
2266 
# In  --> In task wait for response at time 1626786000
2267 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1627091000
2268 
# In  --> Decoder enabled at time 1627790000 in host
2269 
# In  --> StopTime = x, SE0StartTime = x
2270 
# In  --> receive data = d2
2271 
# In  --> StopTime = x, SE0StartTime = x
2272 
# In  --> EOP asserted for 2 bit time at time 1628603000
2273 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2274 
# CntrlTransType = 10
2275 
# In  --> In task wait for response at time 1631742000
2276 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1632131000
2277 
# In  --> Decoder enabled at time 1632834000 in host
2278 
# In  --> receive data = 4b
2279 
# In  --> receive data = 00
2280 
# In  --> receive data = 00
2281 
# In  --> receive data = 00
2282 
# In  --> receive data = f9
2283 
# In  --> receive data = 3f
2284 
# In  --> StopTime = x, SE0StartTime = x
2285 
# In  --> receive data = 99
2286 
# In  --> StopTime = x, SE0StartTime = x
2287 
# In  --> EOP asserted for 2 bit time at time 1637717000
2288 
# In  --> Data toggle recevied is 1001011 at time 1637801000
2289 
# In  --> received byte[1] = 00000000
2290 
# In  --> received byte[2] = 00000000
2291 
# In  --> received byte[3] = 00000000
2292 
# In  --> received byte[4] = 11111001
2293 
# In  --> calculated crc is 366 at time 1637801000.
2294 
# In  --> received raw crc is 366 at time 1637801000.
2295 
# In  --> received crc is 3f99 at time 1637801000.
2296 
# In  --> tmpCrc 3f99, at time 1637801000
2297 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  8c
2298 
# ... Read Data from UART done cnt :        14...
2299 
# In  --> sending ACK at time 1639722000
2300 
# RecvBuffer[0]  = 00000000  : 0
2301 
# RecvBuffer[1]  = 00000000  : 0
2302 
# RecvBuffer[2]  = 00000000  : 0
2303 
# RecvBuffer[3]  = 11111001  : 249
2304 
# In  --> In task wait for response at time 1646274000
2305 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1646579000
2306 
# In  --> Decoder enabled at time 1647276000 in host
2307 
# In  --> StopTime = x, SE0StartTime = x
2308 
# In  --> receive data = d2
2309 
# In  --> StopTime = x, SE0StartTime = x
2310 
# In  --> EOP asserted for 2 bit time at time 1648070000
2311 
# ... Write data ce to UART done cnt :         24 ...
2312 
#
2313 
#
2314 
# ... Writing char 232 ...
2315 
# CntrlTransType = 11
2316 
# In  --> In task wait for response at time 1659966000
2317 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1660250000
2318 
# In  --> Decoder enabled at time 1660968000 in host
2319 
# In  --> StopTime = x, SE0StartTime = x
2320 
# In  --> receive data = d2
2321 
# In  --> StopTime = x, SE0StartTime = x
2322 
# In  --> EOP asserted for 2 bit time at time 1661762000
2323 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2324 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
2325 
# In  --> DataToggle is 1
2326 
# In  --> DataToggle is 4b at time 1665006000.
2327 
# In  --> sending byte[1] = 00000000
2328 
# In  --> sending byte[2] = 00000000
2329 
# In  --> sending byte[3] = 00000000
2330 
# In  --> sending byte[4] = 11111001
2331 
# In  --> raw crc is 366 at time             1665006
2332 
# In  --> sent crc is 3f99 at time             1665006
2333 
# In  --> In task wait for response at time 1671054000
2334 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1671338000
2335 
# In  --> Decoder enabled at time 1672055000 in host
2336 
# In  --> StopTime = x, SE0StartTime = x
2337 
# In  --> receive data = d2
2338 
# In  --> StopTime = x, SE0StartTime = x
2339 
# In  --> EOP asserted for 2 bit time at time 1672850000
2340 
# In  --> bits received are 7
2341 
# In  --> ACK received at time 1672850000.
2342 
# Input Address:01, EndPt:0
2343 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
2344 
# In  CntrlTransType = 11, WRITE = 11
2345 
# In  --> In task wait for response at time 1676094000
2346 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1676462000
2347 
# In  --> Decoder enabled at time 1677184000 in host
2348 
# In  --> receive data = 4b
2349 
# In  --> receive data = 00
2350 
# In  --> StopTime = x, SE0StartTime = x
2351 
# In  --> receive data = 00
2352 
# In  --> StopTime = x, SE0StartTime = x
2353 
# In  --> EOP asserted for 2 bit time at time 1679318000
2354 
#
2355 
# ... Reading the UART Status: 000000fb ...
2356 
# CntrlTransType = 10
2357 
# In  --> In task wait for response at time 1693146000
2358 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1693430000
2359 
# In  --> Decoder enabled at time 1694166000 in host
2360 
# In  --> StopTime = x, SE0StartTime = x
2361 
# In  --> receive data = d2
2362 
# In  --> StopTime = x, SE0StartTime = x
2363 
# In  --> EOP asserted for 2 bit time at time 1694963000
2364 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2365 
# CntrlTransType = 10
2366 
# In  --> In task wait for response at time 1698102000
2367 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1698491000
2368 
# In  --> Decoder enabled at time 1699188000 in host
2369 
# In  --> receive data = 4b
2370 
# In  --> receive data = 00
2371 
# In  --> receive data = 00
2372 
# In  --> receive data = 00
2373 
# In  --> receive data = 00
2374 
# In  --> receive data = ff
2375 
# In  --> StopTime = x, SE0StartTime = x
2376 
# In  --> receive data = db
2377 
# In  --> StopTime = x, SE0StartTime = x
2378 
# In  --> EOP asserted for 2 bit time at time 1704077000
2379 
# In  --> Data toggle recevied is 1001011 at time 1704161000
2380 
# In  --> received byte[1] = 00000000
2381 
# In  --> received byte[2] = 00000000
2382 
# In  --> received byte[3] = 00000000
2383 
# In  --> received byte[4] = 00000000
2384 
# In  --> calculated crc is 24 at time 1704161000.
2385 
# In  --> received raw crc is 24 at time 1704161000.
2386 
# In  --> received crc is ffdb at time 1704161000.
2387 
# In  --> tmpCrc ffdb, at time 1704161000
2388 
# In  --> sending ACK at time 1706082000
2389 
# RecvBuffer[0]  = 00000000  : 0
2390 
# RecvBuffer[1]  = 00000000  : 0
2391 
# RecvBuffer[2]  = 00000000  : 0
2392 
# RecvBuffer[3]  = 00000000  : 0
2393 
# In  --> In task wait for response at time 1712634000
2394 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1712939000
2395 
# In  --> Decoder enabled at time 1713654000 in host
2396 
# In  --> StopTime = x, SE0StartTime = x
2397 
# In  --> receive data = d2
2398 
# In  --> StopTime = x, SE0StartTime = x
2399 
# In  --> EOP asserted for 2 bit time at time 1714451000
2400 
# ... Write data e8 to UART done cnt :         25 ...
2401 
#
2402 
#
2403 
# ... Writing char 197 ...
2404 
# CntrlTransType = 10
2405 
# In  --> In task wait for response at time 1726326000
2406 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1726631000
2407 
# In  --> Decoder enabled at time 1727346000 in host
2408 
# In  --> StopTime = x, SE0StartTime = x
2409 
# In  --> receive data = d2
2410 
# In  --> StopTime = x, SE0StartTime = x
2411 
# In  --> EOP asserted for 2 bit time at time 1728143000
2412 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2413 
# CntrlTransType = 10
2414 
# In  --> In task wait for response at time 1731282000
2415 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1731671000
2416 
# In  --> Decoder enabled at time 1732366000 in host
2417 
# In  --> receive data = 4b
2418 
# In  --> receive data = 00
2419 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  f9
2420 
# ... Read Data from UART done cnt :        15...
2421 
# In  --> receive data = 00
2422 
# In  --> receive data = 00
2423 
# In  --> receive data = c6
2424 
# In  --> receive data = 7f
2425 
# In  --> StopTime = x, SE0StartTime = x
2426 
# In  --> receive data = 89
2427 
# In  --> StopTime = x, SE0StartTime = x
2428 
# In  --> EOP asserted for 2 bit time at time 1737257000
2429 
# In  --> Data toggle recevied is 1001011 at time 1737341000
2430 
# In  --> received byte[1] = 00000000
2431 
# In  --> received byte[2] = 00000000
2432 
# In  --> received byte[3] = 00000000
2433 
# In  --> received byte[4] = 11000110
2434 
# In  --> calculated crc is 16e at time 1737341000.
2435 
# In  --> received raw crc is 16e at time 1737341000.
2436 
# In  --> received crc is 7f89 at time 1737341000.
2437 
# In  --> tmpCrc 7f89, at time 1737341000
2438 
# In  --> sending ACK at time 1739262000
2439 
# RecvBuffer[0]  = 00000000  : 0
2440 
# RecvBuffer[1]  = 00000000  : 0
2441 
# RecvBuffer[2]  = 00000000  : 0
2442 
# RecvBuffer[3]  = 11000110  : 198
2443 
# In  --> In task wait for response at time 1745814000
2444 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1746119000
2445 
# In  --> Decoder enabled at time 1746829000 in host
2446 
# In  --> StopTime = x, SE0StartTime = x
2447 
# In  --> receive data = d2
2448 
# In  --> StopTime = x, SE0StartTime = x
2449 
# In  --> EOP asserted for 2 bit time at time 1747631000
2450 
# CntrlTransType = 11
2451 
# In  --> In task wait for response at time 1759506000
2452 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1759811000
2453 
# In  --> Decoder enabled at time 1760520000 in host
2454 
# In  --> StopTime = x, SE0StartTime = x
2455 
# In  --> receive data = d2
2456 
# In  --> StopTime = x, SE0StartTime = x
2457 
# In  --> EOP asserted for 2 bit time at time 1761323000
2458 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2459 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
2460 
# In  --> DataToggle is 1
2461 
# In  --> DataToggle is 4b at time 1764546000.
2462 
# In  --> sending byte[1] = 00000000
2463 
# In  --> sending byte[2] = 00000000
2464 
# In  --> sending byte[3] = 00000000
2465 
# In  --> sending byte[4] = 11000110
2466 
# In  --> raw crc is 16e at time             1764546
2467 
# In  --> sent crc is 7f89 at time             1764546
2468 
# In  --> In task wait for response at time 1770594000
2469 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1770899000
2470 
# In  --> Decoder enabled at time 1771607000 in host
2471 
# In  --> StopTime = x, SE0StartTime = x
2472 
# In  --> receive data = d2
2473 
# In  --> StopTime = x, SE0StartTime = x
2474 
# In  --> EOP asserted for 2 bit time at time 1772411000
2475 
# In  --> bits received are 7
2476 
# In  --> ACK received at time 1772411000.
2477 
# Input Address:01, EndPt:0
2478 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
2479 
# In  CntrlTransType = 11, WRITE = 11
2480 
# In  --> In task wait for response at time 1775634000
2481 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1775939000
2482 
# In  --> Decoder enabled at time 1776651000 in host
2483 
# In  --> receive data = 4b
2484 
# In  --> receive data = 00
2485 
# In  --> StopTime = x, SE0StartTime = x
2486 
# In  --> receive data = 00
2487 
# In  --> StopTime = x, SE0StartTime = x
2488 
# In  --> EOP asserted for 2 bit time at time 1778795000
2489 
#
2490 
# ... Reading the UART Status: 000000c6 ...
2491 
# ... Write data c5 to UART done cnt :         26 ...
2492 
#
2493 
#
2494 
# ... Writing char  92 ...
2495 
# CntrlTransType = 10
2496 
# In  --> In task wait for response at time 1792602000
2497 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1792907000
2498 
# In  --> Decoder enabled at time 1793614000 in host
2499 
# In  --> StopTime = x, SE0StartTime = x
2500 
# In  --> receive data = d2
2501 
# In  --> StopTime = x, SE0StartTime = x
2502 
# In  --> EOP asserted for 2 bit time at time 1794419000
2503 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2504 
# CntrlTransType = 10
2505 
# In  --> In task wait for response at time 1797558000
2506 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1797947000
2507 
# In  --> Decoder enabled at time 1798658000 in host
2508 
# In  --> receive data = 4b
2509 
# In  --> receive data = 00
2510 
# In  --> receive data = 00
2511 
# In  --> receive data = 00
2512 
# In  --> receive data = 00
2513 
# In  --> receive data = ff
2514 
# In  --> StopTime = x, SE0StartTime = x
2515 
# In  --> receive data = db
2516 
# In  --> StopTime = x, SE0StartTime = x
2517 
# In  --> EOP asserted for 2 bit time at time 1803554000
2518 
# In  --> Data toggle recevied is 1001011 at time 1803638000
2519 
# In  --> received byte[1] = 00000000
2520 
# In  --> received byte[2] = 00000000
2521 
# In  --> received byte[3] = 00000000
2522 
# In  --> received byte[4] = 00000000
2523 
# In  --> calculated crc is 24 at time 1803638000.
2524 
# In  --> received raw crc is 24 at time 1803638000.
2525 
# In  --> received crc is ffdb at time 1803638000.
2526 
# In  --> tmpCrc ffdb, at time 1803638000
2527 
# In  --> sending ACK at time 1805538000
2528 
# RecvBuffer[0]  = 00000000  : 0
2529 
# RecvBuffer[1]  = 00000000  : 0
2530 
# RecvBuffer[2]  = 00000000  : 0
2531 
# RecvBuffer[3]  = 00000000  : 0
2532 
# In  --> In task wait for response at time 1812090000
2533 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1812374000
2534 
# In  --> Decoder enabled at time 1813100000 in host
2535 
# In  --> StopTime = x, SE0StartTime = x
2536 
# In  --> receive data = d2
2537 
# In  --> StopTime = x, SE0StartTime = x
2538 
# In  --> EOP asserted for 2 bit time at time 1813886000
2539 
# CntrlTransType = 10
2540 
# In  --> In task wait for response at time 1825782000
2541 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1826066000
2542 
# In  --> Decoder enabled at time 1826792000 in host
2543 
# In  --> StopTime = x, SE0StartTime = x
2544 
# In  --> receive data = d2
2545 
# In  --> StopTime = x, SE0StartTime = x
2546 
# In  --> EOP asserted for 2 bit time at time 1827578000
2547 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2548 
# CntrlTransType = 10
2549 
# In  --> In task wait for response at time 1830738000
2550 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1831106000
2551 
# In  --> Decoder enabled at time 1831835000 in host
2552 
# In  --> receive data = 4b
2553 
# In  --> receive data = 00
2554 
# In  --> receive data = 00
2555 
# In  --> receive data = 00
2556 
# In  --> receive data = c5
2557 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  c6
2558 
# ... Read Data from UART done cnt :        16...
2559 
# In  --> receive data = 3f
2560 
# In  --> StopTime = x, SE0StartTime = x
2561 
# In  --> receive data = 88
2562 
# In  --> StopTime = x, SE0StartTime = x
2563 
# In  --> EOP asserted for 2 bit time at time 1836713000
2564 
# In  --> Data toggle recevied is 1001011 at time 1836797000
2565 
# In  --> received byte[1] = 00000000
2566 
# In  --> received byte[2] = 00000000
2567 
# In  --> received byte[3] = 00000000
2568 
# In  --> received byte[4] = 11000101
2569 
# In  --> calculated crc is 3ee at time 1836797000.
2570 
# In  --> received raw crc is 3ee at time 1836797000.
2571 
# In  --> received crc is 3f88 at time 1836797000.
2572 
# In  --> tmpCrc 3f88, at time 1836797000
2573 
# In  --> sending ACK at time 1838718000
2574 
# RecvBuffer[0]  = 00000000  : 0
2575 
# RecvBuffer[1]  = 00000000  : 0
2576 
# RecvBuffer[2]  = 00000000  : 0
2577 
# RecvBuffer[3]  = 11000101  : 197
2578 
# In  --> In task wait for response at time 1845270000
2579 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1845575000
2580 
# ... Write data 5c to UART done cnt :         27 ...
2581 
#
2582 
#
2583 
# ... Writing char 189 ...
2584 
# In  --> Decoder enabled at time 1846280000 in host
2585 
# In  --> StopTime = x, SE0StartTime = x
2586 
# In  --> receive data = d2
2587 
# In  --> StopTime = x, SE0StartTime = x
2588 
# In  --> EOP asserted for 2 bit time at time 1847087000
2589 
# CntrlTransType = 11
2590 
# In  --> In task wait for response at time 1858962000
2591 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1859267000
2592 
# In  --> Decoder enabled at time 1859969000 in host
2593 
# In  --> StopTime = x, SE0StartTime = x
2594 
# In  --> receive data = d2
2595 
# In  --> StopTime = x, SE0StartTime = x
2596 
# In  --> EOP asserted for 2 bit time at time 1860779000
2597 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2598 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
2599 
# In  --> DataToggle is 1
2600 
# In  --> DataToggle is 4b at time 1864002000.
2601 
# In  --> sending byte[1] = 00000000
2602 
# In  --> sending byte[2] = 00000000
2603 
# In  --> sending byte[3] = 00000000
2604 
# In  --> sending byte[4] = 11000101
2605 
# In  --> raw crc is 3ee at time             1864002
2606 
# In  --> sent crc is 3f88 at time             1864002
2607 
# In  --> In task wait for response at time 1870050000
2608 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1870355000
2609 
# In  --> Decoder enabled at time 1871056000 in host
2610 
# In  --> StopTime = x, SE0StartTime = x
2611 
# In  --> receive data = d2
2612 
# In  --> StopTime = x, SE0StartTime = x
2613 
# In  --> EOP asserted for 2 bit time at time 1871867000
2614 
# In  --> bits received are 7
2615 
# In  --> ACK received at time 1871867000.
2616 
# Input Address:01, EndPt:0
2617 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
2618 
# In  CntrlTransType = 11, WRITE = 11
2619 
# In  --> In task wait for response at time 1875090000
2620 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1875479000
2621 
# In  --> Decoder enabled at time 1876182000 in host
2622 
# In  --> receive data = 4b
2623 
# In  --> receive data = 00
2624 
# In  --> StopTime = x, SE0StartTime = x
2625 
# In  --> receive data = 00
2626 
# In  --> StopTime = x, SE0StartTime = x
2627 
# In  --> EOP asserted for 2 bit time at time 1878314000
2628 
#
2629 
# ... Reading the UART Status: 000000c7 ...
2630 
# CntrlTransType = 10
2631 
# In  --> In task wait for response at time 1892142000
2632 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1892426000
2633 
# In  --> Decoder enabled at time 1893149000 in host
2634 
# In  --> StopTime = x, SE0StartTime = x
2635 
# In  --> receive data = d2
2636 
# In  --> StopTime = x, SE0StartTime = x
2637 
# In  --> EOP asserted for 2 bit time at time 1893938000
2638 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2639 
# CntrlTransType = 10
2640 
# In  --> In task wait for response at time 1897098000
2641 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1897466000
2642 
# In  --> Decoder enabled at time 1898189000 in host
2643 
# In  --> receive data = 4b
2644 
# In  --> receive data = 00
2645 
# In  --> receive data = 00
2646 
# In  --> receive data = 00
2647 
# In  --> receive data = 00
2648 
# In  --> receive data = ff
2649 
# In  --> StopTime = x, SE0StartTime = x
2650 
# In  --> receive data = db
2651 
# In  --> StopTime = x, SE0StartTime = x
2652 
# In  --> EOP asserted for 2 bit time at time 1903073000
2653 
# In  --> Data toggle recevied is 1001011 at time 1903157000
2654 
# In  --> received byte[1] = 00000000
2655 
# In  --> received byte[2] = 00000000
2656 
# In  --> received byte[3] = 00000000
2657 
# In  --> received byte[4] = 00000000
2658 
# In  --> calculated crc is 24 at time 1903157000.
2659 
# In  --> received raw crc is 24 at time 1903157000.
2660 
# In  --> received crc is ffdb at time 1903157000.
2661 
# In  --> tmpCrc ffdb, at time 1903157000
2662 
# In  --> sending ACK at time 1905078000
2663 
# RecvBuffer[0]  = 00000000  : 0
2664 
# RecvBuffer[1]  = 00000000  : 0
2665 
# RecvBuffer[2]  = 00000000  : 0
2666 
# RecvBuffer[3]  = 00000000  : 0
2667 
# ... Write data bd to UART done cnt :         28 ...
2668 
#
2669 
#
2670 
# ... Writing char  45 ...
2671 
# In  --> In task wait for response at time 1911630000
2672 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1911935000
2673 
# In  --> Decoder enabled at time 1912632000 in host
2674 
# In  --> StopTime = x, SE0StartTime = x
2675 
# In  --> receive data = d2
2676 
# In  --> StopTime = x, SE0StartTime = x
2677 
# In  --> EOP asserted for 2 bit time at time 1913426000
2678 
# CntrlTransType = 10
2679 
# In  --> In task wait for response at time 1925322000
2680 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1925606000
2681 
# In  --> Decoder enabled at time 1926323000 in host
2682 
# In  --> StopTime = x, SE0StartTime = x
2683 
# In  --> receive data = d2
2684 
# In  --> StopTime = x, SE0StartTime = x
2685 
# In  --> EOP asserted for 2 bit time at time 1927118000
2686 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2687 
# CntrlTransType = 10
2688 
# In  --> In task wait for response at time 1930278000
2689 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1930646000
2690 
# In  --> Decoder enabled at time 1931367000 in host
2691 
# In  --> receive data = 4b
2692 
# In  --> receive data = 00
2693 
# In  --> receive data = 00
2694 
# In  --> receive data = 00
2695 
# In  --> receive data = aa
2696 
# In  --> receive data = 7f
2697 
# In  --> StopTime = x, SE0StartTime = x
2698 
# In  --> receive data = a4
2699 
# In  --> StopTime = x, SE0StartTime = x
2700 
# In  --> EOP asserted for 2 bit time at time 1936253000
2701 
# In  --> Data toggle recevied is 1001011 at time 1936337000
2702 
# In  --> received byte[1] = 00000000
2703 
# In  --> received byte[2] = 00000000
2704 
# In  --> received byte[3] = 00000000
2705 
# In  --> received byte[4] = 10101010
2706 
# In  --> calculated crc is 1da at time 1936337000.
2707 
# In  --> received raw crc is 1da at time 1936337000.
2708 
# In  --> received crc is 7fa4 at time 1936337000.
2709 
# In  --> tmpCrc 7fa4, at time 1936337000
2710 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  c5
2711 
# ... Read Data from UART done cnt :        17...
2712 
# In  --> sending ACK at time 1938258000
2713 
# RecvBuffer[0]  = 00000000  : 0
2714 
# RecvBuffer[1]  = 00000000  : 0
2715 
# RecvBuffer[2]  = 00000000  : 0
2716 
# RecvBuffer[3]  = 10101010  : 170
2717 
# In  --> In task wait for response at time 1944810000
2718 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1945115000
2719 
# In  --> Decoder enabled at time 1945830000 in host
2720 
# In  --> StopTime = x, SE0StartTime = x
2721 
# In  --> receive data = d2
2722 
# In  --> StopTime = x, SE0StartTime = x
2723 
# In  --> EOP asserted for 2 bit time at time 1946627000
2724 
# CntrlTransType = 11
2725 
# In  --> In task wait for response at time 1958502000
2726 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1958807000
2727 
# In  --> Decoder enabled at time 1959522000 in host
2728 
# In  --> StopTime = x, SE0StartTime = x
2729 
# In  --> receive data = d2
2730 
# In  --> StopTime = x, SE0StartTime = x
2731 
# In  --> EOP asserted for 2 bit time at time 1960319000
2732 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2733 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
2734 
# In  --> DataToggle is 1
2735 
# In  --> DataToggle is 4b at time 1963542000.
2736 
# In  --> sending byte[1] = 00000000
2737 
# In  --> sending byte[2] = 00000000
2738 
# In  --> sending byte[3] = 00000000
2739 
# In  --> sending byte[4] = 10101010
2740 
# In  --> raw crc is 1da at time             1963542
2741 
# In  --> sent crc is 7fa4 at time             1963542
2742 
# In  --> In task wait for response at time 1969590000
2743 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1969895000
2744 
# In  --> Decoder enabled at time 1970608000 in host
2745 
# In  --> StopTime = x, SE0StartTime = x
2746 
# In  --> receive data = d2
2747 
# In  --> StopTime = x, SE0StartTime = x
2748 
# In  --> EOP asserted for 2 bit time at time 1971407000
2749 
# In  --> bits received are 7
2750 
# In  --> ACK received at time 1971407000.
2751 
# Input Address:01, EndPt:0
2752 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
2753 
# In  CntrlTransType = 11, WRITE = 11
2754 
# ... Write data 2d to UART done cnt :         29 ...
2755 
#
2756 
#
2757 
# ... Writing char 101 ...
2758 
# In  --> In task wait for response at time 1974630000
2759 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1975019000
2760 
# In  --> Decoder enabled at time 1975717000 in host
2761 
# In  --> receive data = 4b
2762 
# In  --> receive data = 00
2763 
# In  --> StopTime = x, SE0StartTime = x
2764 
# In  --> receive data = 00
2765 
# In  --> StopTime = x, SE0StartTime = x
2766 
# In  --> EOP asserted for 2 bit time at time 1977854000
2767 
#
2768 
# ... Reading the UART Status: 000000aa ...
2769 
# CntrlTransType = 10
2770 
# In  --> In task wait for response at time 1991682000
2771 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1991966000
2772 
# In  --> Decoder enabled at time 1992699000 in host
2773 
# In  --> StopTime = x, SE0StartTime = x
2774 
# In  --> receive data = d2
2775 
# In  --> StopTime = x, SE0StartTime = x
2776 
# In  --> EOP asserted for 2 bit time at time 1993499000
2777 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2778 
# CntrlTransType = 10
2779 
# In  --> In task wait for response at time 1996638000
2780 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 1997027000
2781 
# In  --> Decoder enabled at time 1997721000 in host
2782 
# In  --> receive data = 4b
2783 
# In  --> receive data = 00
2784 
# In  --> receive data = 00
2785 
# In  --> receive data = 00
2786 
# In  --> receive data = 00
2787 
# In  --> receive data = ff
2788 
# In  --> StopTime = x, SE0StartTime = x
2789 
# In  --> receive data = db
2790 
# In  --> StopTime = x, SE0StartTime = x
2791 
# In  --> EOP asserted for 2 bit time at time 2002613000
2792 
# In  --> Data toggle recevied is 1001011 at time 2002697000
2793 
# In  --> received byte[1] = 00000000
2794 
# In  --> received byte[2] = 00000000
2795 
# In  --> received byte[3] = 00000000
2796 
# In  --> received byte[4] = 00000000
2797 
# In  --> calculated crc is 24 at time 2002697000.
2798 
# In  --> received raw crc is 24 at time 2002697000.
2799 
# In  --> received crc is ffdb at time 2002697000.
2800 
# In  --> tmpCrc ffdb, at time 2002697000
2801 
# In  --> sending ACK at time 2004618000
2802 
# RecvBuffer[0]  = 00000000  : 0
2803 
# RecvBuffer[1]  = 00000000  : 0
2804 
# RecvBuffer[2]  = 00000000  : 0
2805 
# RecvBuffer[3]  = 00000000  : 0
2806 
# In  --> In task wait for response at time 2011170000
2807 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2011475000
2808 
# In  --> Decoder enabled at time 2012187000 in host
2809 
# In  --> StopTime = x, SE0StartTime = x
2810 
# In  --> receive data = d2
2811 
# In  --> StopTime = x, SE0StartTime = x
2812 
# In  --> EOP asserted for 2 bit time at time 2012987000
2813 
# CntrlTransType = 10
2814 
# In  --> In task wait for response at time 2024862000
2815 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2025167000
2816 
# In  --> Decoder enabled at time 2025879000 in host
2817 
# In  --> StopTime = x, SE0StartTime = x
2818 
# In  --> receive data = d2
2819 
# In  --> StopTime = x, SE0StartTime = x
2820 
# In  --> EOP asserted for 2 bit time at time 2026679000
2821 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2822 
# CntrlTransType = 10
2823 
# In  --> In task wait for response at time 2029818000
2824 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2030123000
2825 
# In  --> Decoder enabled at time 2030839000 in host
2826 
# In  --> receive data = 4b
2827 
# In  --> receive data = 00
2828 
# In  --> receive data = 00
2829 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  aa
2830 
# ... Read Data from UART done cnt :        18...
2831 
# In  --> receive data = 00
2832 
# In  --> receive data = e5
2833 
# In  --> receive data = 3e
2834 
# In  --> StopTime = x, SE0StartTime = x
2835 
# In  --> receive data = 50
2836 
# In  --> StopTime = x, SE0StartTime = x
2837 
# In  --> EOP asserted for 2 bit time at time 2035646000
2838 
# In  --> Data toggle recevied is 1001011 at time 2035730000
2839 
# In  --> received byte[1] = 00000000
2840 
# In  --> received byte[2] = 00000000
2841 
# In  --> received byte[3] = 00000000
2842 
# In  --> received byte[4] = 11100101
2843 
# In  --> calculated crc is 83f5 at time 2035730000.
2844 
# In  --> received raw crc is 83f5 at time 2035730000.
2845 
# In  --> received crc is 3e50 at time 2035730000.
2846 
# In  --> tmpCrc 3e50, at time 2035730000
2847 
# In  --> sending ACK at time 2037630000
2848 
# RecvBuffer[0]  = 00000000  : 0
2849 
# RecvBuffer[1]  = 00000000  : 0
2850 
# RecvBuffer[2]  = 00000000  : 0
2851 
# RecvBuffer[3]  = 11100101  : 229
2852 
# ... Write data 65 to UART done cnt :         30 ...
2853 
#
2854 
#
2855 
# ... Writing char  99 ...
2856 
# In  --> In task wait for response at time 2044182000
2857 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2044466000
2858 
# In  --> Decoder enabled at time 2045195000 in host
2859 
# In  --> StopTime = x, SE0StartTime = x
2860 
# In  --> receive data = d2
2861 
# In  --> StopTime = x, SE0StartTime = x
2862 
# In  --> EOP asserted for 2 bit time at time 2045999000
2863 
# CntrlTransType = 11
2864 
# In  --> In task wait for response at time 2057874000
2865 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2058179000
2866 
# In  --> Decoder enabled at time 2058887000 in host
2867 
# In  --> StopTime = x, SE0StartTime = x
2868 
# In  --> receive data = d2
2869 
# In  --> StopTime = x, SE0StartTime = x
2870 
# In  --> EOP asserted for 2 bit time at time 2059691000
2871 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2872 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
2873 
# In  --> DataToggle is 1
2874 
# In  --> DataToggle is 4b at time 2062914000.
2875 
# In  --> sending byte[1] = 00000000
2876 
# In  --> sending byte[2] = 00000000
2877 
# In  --> sending byte[3] = 00000000
2878 
# In  --> sending byte[4] = 11100101
2879 
# In  --> raw crc is 83f5 at time             2062914
2880 
# In  --> sent crc is 3e50 at time             2062914
2881 
# In  --> In task wait for response at time 2068878000
2882 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2069183000
2883 
# In  --> Decoder enabled at time 2069893000 in host
2884 
# In  --> StopTime = x, SE0StartTime = x
2885 
# In  --> receive data = d2
2886 
# In  --> StopTime = x, SE0StartTime = x
2887 
# In  --> EOP asserted for 2 bit time at time 2070695000
2888 
# In  --> bits received are 7
2889 
# In  --> ACK received at time 2070695000.
2890 
# Input Address:01, EndPt:0
2891 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
2892 
# In  CntrlTransType = 11, WRITE = 11
2893 
# In  --> In task wait for response at time 2073918000
2894 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2074307000
2895 
# In  --> Decoder enabled at time 2075017000 in host
2896 
# In  --> receive data = 4b
2897 
# In  --> receive data = 00
2898 
# In  --> StopTime = x, SE0StartTime = x
2899 
# In  --> receive data = 00
2900 
# In  --> StopTime = x, SE0StartTime = x
2901 
# In  --> EOP asserted for 2 bit time at time 2077163000
2902 
#
2903 
# ... Reading the UART Status: 000000e7 ...
2904 
# CntrlTransType = 10
2905 
# In  --> In task wait for response at time 2090970000
2906 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2091275000
2907 
# In  --> Decoder enabled at time 2091981000 in host
2908 
# In  --> StopTime = x, SE0StartTime = x
2909 
# In  --> receive data = d2
2910 
# In  --> StopTime = x, SE0StartTime = x
2911 
# In  --> EOP asserted for 2 bit time at time 2092787000
2912 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2913 
# CntrlTransType = 10
2914 
# In  --> In task wait for response at time 2095926000
2915 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2096315000
2916 
# In  --> Decoder enabled at time 2097024000 in host
2917 
# In  --> receive data = 4b
2918 
# In  --> receive data = 00
2919 
# In  --> receive data = 00
2920 
# In  --> receive data = 00
2921 
# In  --> receive data = 00
2922 
# In  --> receive data = ff
2923 
# In  --> StopTime = x, SE0StartTime = x
2924 
# In  --> receive data = db
2925 
# In  --> StopTime = x, SE0StartTime = x
2926 
# In  --> EOP asserted for 2 bit time at time 2101922000
2927 
# In  --> Data toggle recevied is 1001011 at time 2102006000
2928 
# In  --> received byte[1] = 00000000
2929 
# In  --> received byte[2] = 00000000
2930 
# In  --> received byte[3] = 00000000
2931 
# In  --> received byte[4] = 00000000
2932 
# In  --> calculated crc is 24 at time 2102006000.
2933 
# In  --> received raw crc is 24 at time 2102006000.
2934 
# In  --> received crc is ffdb at time 2102006000.
2935 
# In  --> tmpCrc ffdb, at time 2102006000
2936 
# ... Write data 63 to UART done cnt :         31 ...
2937 
#
2938 
#
2939 
# ... Writing char  10 ...
2940 
# In  --> sending ACK at time 2103906000
2941 
# RecvBuffer[0]  = 00000000  : 0
2942 
# RecvBuffer[1]  = 00000000  : 0
2943 
# RecvBuffer[2]  = 00000000  : 0
2944 
# RecvBuffer[3]  = 00000000  : 0
2945 
# In  --> In task wait for response at time 2110458000
2946 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2110742000
2947 
# In  --> Decoder enabled at time 2111469000 in host
2948 
# In  --> StopTime = x, SE0StartTime = x
2949 
# In  --> receive data = d2
2950 
# In  --> StopTime = x, SE0StartTime = x
2951 
# In  --> EOP asserted for 2 bit time at time 2112254000
2952 
# CntrlTransType = 10
2953 
# In  --> In task wait for response at time 2124150000
2954 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2124434000
2955 
# In  --> Decoder enabled at time 2125158000 in host
2956 
# In  --> StopTime = x, SE0StartTime = x
2957 
# In  --> receive data = d2
2958 
# In  --> StopTime = x, SE0StartTime = x
2959 
# In  --> EOP asserted for 2 bit time at time 2125946000
2960 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
2961 
# CntrlTransType = 10
2962 
# In  --> In task wait for response at time 2129106000
2963 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2129474000
2964 
# In  --> Decoder enabled at time 2130204000 in host
2965 
# In  --> receive data = 4b
2966 
# In  --> receive data = 00
2967 
# In  --> receive data = 00
2968 
# In  --> receive data = 00
2969 
# In  --> receive data = 77
2970 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  e5
2971 
# ... Read Data from UART done cnt :        19...
2972 
# In  --> receive data = bf
2973 
# In  --> StopTime = x, SE0StartTime = x
2974 
# In  --> receive data = fd
2975 
# In  --> StopTime = x, SE0StartTime = x
2976 
# In  --> EOP asserted for 2 bit time at time 2135081000
2977 
# In  --> Data toggle recevied is 1001011 at time 2135165000
2978 
# In  --> received byte[1] = 00000000
2979 
# In  --> received byte[2] = 00000000
2980 
# In  --> received byte[3] = 00000000
2981 
# In  --> received byte[4] = 01110111
2982 
# In  --> calculated crc is 240 at time 2135165000.
2983 
# In  --> received raw crc is 240 at time 2135165000.
2984 
# In  --> received crc is bffd at time 2135165000.
2985 
# In  --> tmpCrc bffd, at time 2135165000
2986 
# In  --> sending ACK at time 2137086000
2987 
# RecvBuffer[0]  = 00000000  : 0
2988 
# RecvBuffer[1]  = 00000000  : 0
2989 
# RecvBuffer[2]  = 00000000  : 0
2990 
# RecvBuffer[3]  = 01110111  : 119
2991 
# In  --> In task wait for response at time 2143638000
2992 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2143943000
2993 
# In  --> Decoder enabled at time 2144643000 in host
2994 
# In  --> StopTime = x, SE0StartTime = x
2995 
# In  --> receive data = d2
2996 
# In  --> StopTime = x, SE0StartTime = x
2997 
# In  --> EOP asserted for 2 bit time at time 2145455000
2998 
# CntrlTransType = 11
2999 
# In  --> In task wait for response at time 2157330000
3000 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2157635000
3001 
# In  --> Decoder enabled at time 2158338000 in host
3002 
# In  --> StopTime = x, SE0StartTime = x
3003 
# In  --> receive data = d2
3004 
# In  --> StopTime = x, SE0StartTime = x
3005 
# In  --> EOP asserted for 2 bit time at time 2159147000
3006 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3007 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
3008 
# In  --> DataToggle is 1
3009 
# In  --> DataToggle is 4b at time 2162370000.
3010 
# In  --> sending byte[1] = 00000000
3011 
# In  --> sending byte[2] = 00000000
3012 
# In  --> sending byte[3] = 00000000
3013 
# In  --> sending byte[4] = 01110111
3014 
# In  --> raw crc is 240 at time             2162370
3015 
# In  --> sent crc is bffd at time             2162370
3016 
# ... Write data 0a to UART done cnt :         32 ...
3017 
#
3018 
#
3019 
# ... Writing char 128 ...
3020 
# In  --> In task wait for response at time 2168502000
3021 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2168807000
3022 
# In  --> Decoder enabled at time 2169505000 in host
3023 
# In  --> StopTime = x, SE0StartTime = x
3024 
# In  --> receive data = d2
3025 
# In  --> StopTime = x, SE0StartTime = x
3026 
# In  --> EOP asserted for 2 bit time at time 2170319000
3027 
# In  --> bits received are 7
3028 
# In  --> ACK received at time 2170319000.
3029 
# Input Address:01, EndPt:0
3030 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
3031 
# In  CntrlTransType = 11, WRITE = 11
3032 
# In  --> In task wait for response at time 2173542000
3033 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2173931000
3034 
# In  --> Decoder enabled at time 2174635000 in host
3035 
# In  --> receive data = 4b
3036 
# In  --> receive data = 00
3037 
# In  --> StopTime = x, SE0StartTime = x
3038 
# In  --> receive data = 00
3039 
# In  --> StopTime = x, SE0StartTime = x
3040 
# In  --> EOP asserted for 2 bit time at time 2176766000
3041 
#
3042 
# ... Reading the UART Status: 00000077 ...
3043 
# CntrlTransType = 10
3044 
# In  --> In task wait for response at time 2190594000
3045 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2190878000
3046 
# In  --> Decoder enabled at time 2191596000 in host
3047 
# In  --> StopTime = x, SE0StartTime = x
3048 
# In  --> receive data = d2
3049 
# In  --> StopTime = x, SE0StartTime = x
3050 
# In  --> EOP asserted for 2 bit time at time 2192390000
3051 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3052 
# CntrlTransType = 10
3053 
# In  --> In task wait for response at time 2195550000
3054 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2195918000
3055 
# In  --> Decoder enabled at time 2196642000 in host
3056 
# In  --> receive data = 4b
3057 
# In  --> receive data = 00
3058 
# In  --> receive data = 00
3059 
# In  --> receive data = 00
3060 
# In  --> receive data = 00
3061 
# In  --> receive data = ff
3062 
# In  --> StopTime = x, SE0StartTime = x
3063 
# In  --> receive data = db
3064 
# In  --> StopTime = x, SE0StartTime = x
3065 
# In  --> EOP asserted for 2 bit time at time 2201525000
3066 
# In  --> Data toggle recevied is 1001011 at time 2201609000
3067 
# In  --> received byte[1] = 00000000
3068 
# In  --> received byte[2] = 00000000
3069 
# In  --> received byte[3] = 00000000
3070 
# In  --> received byte[4] = 00000000
3071 
# In  --> calculated crc is 24 at time 2201609000.
3072 
# In  --> received raw crc is 24 at time 2201609000.
3073 
# In  --> received crc is ffdb at time 2201609000.
3074 
# In  --> tmpCrc ffdb, at time 2201609000
3075 
# In  --> sending ACK at time 2203530000
3076 
# RecvBuffer[0]  = 00000000  : 0
3077 
# RecvBuffer[1]  = 00000000  : 0
3078 
# RecvBuffer[2]  = 00000000  : 0
3079 
# RecvBuffer[3]  = 00000000  : 0
3080 
# In  --> In task wait for response at time 2210082000
3081 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2210387000
3082 
# In  --> Decoder enabled at time 2211105000 in host
3083 
# In  --> StopTime = x, SE0StartTime = x
3084 
# In  --> receive data = d2
3085 
# In  --> StopTime = x, SE0StartTime = x
3086 
# In  --> EOP asserted for 2 bit time at time 2211899000
3087 
# CntrlTransType = 10
3088 
# In  --> In task wait for response at time 2223774000
3089 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2224079000
3090 
# In  --> Decoder enabled at time 2224797000 in host
3091 
# In  --> StopTime = x, SE0StartTime = x
3092 
# In  --> receive data = d2
3093 
# In  --> StopTime = x, SE0StartTime = x
3094 
# In  --> EOP asserted for 2 bit time at time 2225591000
3095 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3096 
# CntrlTransType = 10
3097 
# In  --> In task wait for response at time 2228730000
3098 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2229119000
3099 
# In  --> Decoder enabled at time 2229816000 in host
3100 
# ... Write data 80 to UART done cnt :         33 ...
3101 
#
3102 
#
3103 
# ... Writing char  32 ...
3104 
# In  --> receive data = 4b
3105 
# In  --> receive data = 00
3106 
# In  --> receive data = 00
3107 
# In  --> receive data = 00
3108 
# In  --> receive data = 12
3109 
# In  --> receive data = 7f
3110 
# In  --> StopTime = x, SE0StartTime = x
3111 
# In  --> receive data = d6
3112 
# In  --> StopTime = x, SE0StartTime = x
3113 
# In  --> EOP asserted for 2 bit time at time 2234705000
3114 
# In  --> Data toggle recevied is 1001011 at time 2234789000
3115 
# In  --> received byte[1] = 00000000
3116 
# In  --> received byte[2] = 00000000
3117 
# In  --> received byte[3] = 00000000
3118 
# In  --> received byte[4] = 00010010
3119 
# In  --> calculated crc is 194 at time 2234789000.
3120 
# In  --> received raw crc is 194 at time 2234789000.
3121 
# In  --> received crc is 7fd6 at time 2234789000.
3122 
# In  --> tmpCrc 7fd6, at time 2234789000
3123 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  77
3124 
# ... Read Data from UART done cnt :        20...
3125 
# In  --> sending ACK at time 2236710000
3126 
# RecvBuffer[0]  = 00000000  : 0
3127 
# RecvBuffer[1]  = 00000000  : 0
3128 
# RecvBuffer[2]  = 00000000  : 0
3129 
# RecvBuffer[3]  = 00010010  : 18
3130 
# In  --> In task wait for response at time 2243262000
3131 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2243567000
3132 
# In  --> Decoder enabled at time 2244279000 in host
3133 
# In  --> StopTime = x, SE0StartTime = x
3134 
# In  --> receive data = d2
3135 
# In  --> StopTime = x, SE0StartTime = x
3136 
# In  --> EOP asserted for 2 bit time at time 2245079000
3137 
# CntrlTransType = 11
3138 
# In  --> In task wait for response at time 2256954000
3139 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2257259000
3140 
# In  --> Decoder enabled at time 2257974000 in host
3141 
# In  --> StopTime = x, SE0StartTime = x
3142 
# In  --> receive data = d2
3143 
# In  --> StopTime = x, SE0StartTime = x
3144 
# In  --> EOP asserted for 2 bit time at time 2258771000
3145 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3146 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
3147 
# In  --> DataToggle is 1
3148 
# In  --> DataToggle is 4b at time 2261994000.
3149 
# In  --> sending byte[1] = 00000000
3150 
# In  --> sending byte[2] = 00000000
3151 
# In  --> sending byte[3] = 00000000
3152 
# In  --> sending byte[4] = 00010010
3153 
# In  --> raw crc is 194 at time             2261994
3154 
# In  --> sent crc is 7fd6 at time             2261994
3155 
# In  --> In task wait for response at time 2268042000
3156 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2268347000
3157 
# In  --> Decoder enabled at time 2269061000 in host
3158 
# In  --> StopTime = x, SE0StartTime = x
3159 
# In  --> receive data = d2
3160 
# In  --> StopTime = x, SE0StartTime = x
3161 
# In  --> EOP asserted for 2 bit time at time 2269859000
3162 
# In  --> bits received are 7
3163 
# In  --> ACK received at time 2269859000.
3164 
# Input Address:01, EndPt:0
3165 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
3166 
# In  CntrlTransType = 11, WRITE = 11
3167 
# In  --> In task wait for response at time 2273082000
3168 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2273471000
3169 
# In  --> Decoder enabled at time 2274185000 in host
3170 
# In  --> receive data = 4b
3171 
# In  --> receive data = 00
3172 
# In  --> StopTime = x, SE0StartTime = x
3173 
# In  --> receive data = 00
3174 
# In  --> StopTime = x, SE0StartTime = x
3175 
# In  --> EOP asserted for 2 bit time at time 2276327000
3176 
#
3177 
# ... Reading the UART Status: 00000012 ...
3178 
# CntrlTransType = 10
3179 
# In  --> In task wait for response at time 2290134000
3180 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2290439000
3181 
# In  --> Decoder enabled at time 2291149000 in host
3182 
# In  --> StopTime = x, SE0StartTime = x
3183 
# In  --> receive data = d2
3184 
# In  --> StopTime = x, SE0StartTime = x
3185 
# In  --> EOP asserted for 2 bit time at time 2291951000
3186 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3187 
# CntrlTransType = 10
3188 
# ... Write data 20 to UART done cnt :         34 ...
3189 
#
3190 
#
3191 
# ... Writing char 170 ...
3192 
# In  --> In task wait for response at time 2295090000
3193 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2295395000
3194 
# In  --> Decoder enabled at time 2296108000 in host
3195 
# In  --> receive data = 4b
3196 
# In  --> receive data = 00
3197 
# In  --> receive data = 00
3198 
# In  --> receive data = 00
3199 
# In  --> receive data = 00
3200 
# In  --> receive data = ff
3201 
# In  --> StopTime = x, SE0StartTime = x
3202 
# In  --> receive data = db
3203 
# In  --> StopTime = x, SE0StartTime = x
3204 
# In  --> EOP asserted for 2 bit time at time 2301002000
3205 
# In  --> Data toggle recevied is 1001011 at time 2301086000
3206 
# In  --> received byte[1] = 00000000
3207 
# In  --> received byte[2] = 00000000
3208 
# In  --> received byte[3] = 00000000
3209 
# In  --> received byte[4] = 00000000
3210 
# In  --> calculated crc is 24 at time 2301086000.
3211 
# In  --> received raw crc is 24 at time 2301086000.
3212 
# In  --> received crc is ffdb at time 2301086000.
3213 
# In  --> tmpCrc ffdb, at time 2301086000
3214 
# In  --> sending ACK at time 2302986000
3215 
# RecvBuffer[0]  = 00000000  : 0
3216 
# RecvBuffer[1]  = 00000000  : 0
3217 
# RecvBuffer[2]  = 00000000  : 0
3218 
# RecvBuffer[3]  = 00000000  : 0
3219 
# In  --> In task wait for response at time 2309538000
3220 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2309822000
3221 
# In  --> Decoder enabled at time 2310551000 in host
3222 
# In  --> StopTime = x, SE0StartTime = x
3223 
# In  --> receive data = d2
3224 
# In  --> StopTime = x, SE0StartTime = x
3225 
# In  --> EOP asserted for 2 bit time at time 2311355000
3226 
# CntrlTransType = 10
3227 
# In  --> In task wait for response at time 2323230000
3228 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2323535000
3229 
# In  --> Decoder enabled at time 2324242000 in host
3230 
# In  --> StopTime = x, SE0StartTime = x
3231 
# In  --> receive data = d2
3232 
# In  --> StopTime = x, SE0StartTime = x
3233 
# In  --> EOP asserted for 2 bit time at time 2325047000
3234 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3235 
# CntrlTransType = 10
3236 
# In  --> In task wait for response at time 2328186000
3237 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2328575000
3238 
# In  --> Decoder enabled at time 2329286000 in host
3239 
# In  --> receive data = 4b
3240 
# In  --> receive data = 00
3241 
# In  --> receive data = 00
3242 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  12
3243 
# ... Read Data from UART done cnt :        21...
3244 
# In  --> receive data = 00
3245 
# In  --> receive data = 8f
3246 
# In  --> receive data = be
3247 
# In  --> StopTime = x, SE0StartTime = x
3248 
# In  --> receive data = 7f
3249 
# In  --> StopTime = x, SE0StartTime = x
3250 
# In  --> EOP asserted for 2 bit time at time 2334182000
3251 
# In  --> Data toggle recevied is 1001011 at time 2334266000
3252 
# In  --> received byte[1] = 00000000
3253 
# In  --> received byte[2] = 00000000
3254 
# In  --> received byte[3] = 00000000
3255 
# In  --> received byte[4] = 10001111
3256 
# In  --> calculated crc is 8201 at time 2334266000.
3257 
# In  --> received raw crc is 8201 at time 2334266000.
3258 
# In  --> received crc is be7f at time 2334266000.
3259 
# In  --> tmpCrc be7f, at time 2334266000
3260 
# In  --> sending ACK at time 2336166000
3261 
# RecvBuffer[0]  = 00000000  : 0
3262 
# RecvBuffer[1]  = 00000000  : 0
3263 
# RecvBuffer[2]  = 00000000  : 0
3264 
# RecvBuffer[3]  = 10001111  : 143
3265 
# In  --> In task wait for response at time 2342718000
3266 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2343002000
3267 
# In  --> Decoder enabled at time 2343728000 in host
3268 
# In  --> StopTime = x, SE0StartTime = x
3269 
# In  --> receive data = d2
3270 
# In  --> StopTime = x, SE0StartTime = x
3271 
# In  --> EOP asserted for 2 bit time at time 2344514000
3272 
# CntrlTransType = 11
3273 
# In  --> In task wait for response at time 2356410000
3274 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2356694000
3275 
# In  --> Decoder enabled at time 2357420000 in host
3276 
# In  --> StopTime = x, SE0StartTime = x
3277 
# In  --> receive data = d2
3278 
# In  --> StopTime = x, SE0StartTime = x
3279 
# In  --> EOP asserted for 2 bit time at time 2358206000
3280 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3281 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
3282 
# ... Write data aa to UART done cnt :         35 ...
3283 
#
3284 
#
3285 
# ... Writing char 157 ...
3286 
# In  --> DataToggle is 1
3287 
# In  --> DataToggle is 4b at time 2361450000.
3288 
# In  --> sending byte[1] = 00000000
3289 
# In  --> sending byte[2] = 00000000
3290 
# In  --> sending byte[3] = 00000000
3291 
# In  --> sending byte[4] = 10001111
3292 
# In  --> raw crc is 8201 at time             2361450
3293 
# In  --> sent crc is be7f at time             2361450
3294 
# In  --> In task wait for response at time 2367498000
3295 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2367782000
3296 
# In  --> Decoder enabled at time 2368507000 in host
3297 
# In  --> StopTime = x, SE0StartTime = x
3298 
# In  --> receive data = d2
3299 
# In  --> StopTime = x, SE0StartTime = x
3300 
# In  --> EOP asserted for 2 bit time at time 2369294000
3301 
# In  --> bits received are 7
3302 
# In  --> ACK received at time 2369294000.
3303 
# Input Address:01, EndPt:0
3304 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
3305 
# In  CntrlTransType = 11, WRITE = 11
3306 
# In  --> In task wait for response at time 2372538000
3307 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2372906000
3308 
# In  --> Decoder enabled at time 2373636000 in host
3309 
# In  --> receive data = 4b
3310 
# In  --> receive data = 00
3311 
# In  --> StopTime = x, SE0StartTime = x
3312 
# In  --> receive data = 00
3313 
# In  --> StopTime = x, SE0StartTime = x
3314 
# In  --> EOP asserted for 2 bit time at time 2375762000
3315 
#
3316 
# ... Reading the UART Status: 0000008f ...
3317 
# CntrlTransType = 10
3318 
# In  --> In task wait for response at time 2389590000
3319 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2389874000
3320 
# In  --> Decoder enabled at time 2390600000 in host
3321 
# In  --> StopTime = x, SE0StartTime = x
3322 
# In  --> receive data = d2
3323 
# In  --> StopTime = x, SE0StartTime = x
3324 
# In  --> EOP asserted for 2 bit time at time 2391386000
3325 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3326 
# CntrlTransType = 10
3327 
# In  --> In task wait for response at time 2394546000
3328 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2394914000
3329 
# In  --> Decoder enabled at time 2395643000 in host
3330 
# In  --> receive data = 4b
3331 
# In  --> receive data = 00
3332 
# In  --> receive data = 00
3333 
# In  --> receive data = 00
3334 
# In  --> receive data = 00
3335 
# In  --> receive data = ff
3336 
# In  --> StopTime = x, SE0StartTime = x
3337 
# In  --> receive data = db
3338 
# In  --> StopTime = x, SE0StartTime = x
3339 
# In  --> EOP asserted for 2 bit time at time 2400521000
3340 
# In  --> Data toggle recevied is 1001011 at time 2400605000
3341 
# In  --> received byte[1] = 00000000
3342 
# In  --> received byte[2] = 00000000
3343 
# In  --> received byte[3] = 00000000
3344 
# In  --> received byte[4] = 00000000
3345 
# In  --> calculated crc is 24 at time 2400605000.
3346 
# In  --> received raw crc is 24 at time 2400605000.
3347 
# In  --> received crc is ffdb at time 2400605000.
3348 
# In  --> tmpCrc ffdb, at time 2400605000
3349 
# In  --> sending ACK at time 2402526000
3350 
# RecvBuffer[0]  = 00000000  : 0
3351 
# RecvBuffer[1]  = 00000000  : 0
3352 
# RecvBuffer[2]  = 00000000  : 0
3353 
# RecvBuffer[3]  = 00000000  : 0
3354 
# In  --> In task wait for response at time 2409078000
3355 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2409383000
3356 
# In  --> Decoder enabled at time 2410082000 in host
3357 
# In  --> StopTime = x, SE0StartTime = x
3358 
# In  --> receive data = d2
3359 
# In  --> StopTime = x, SE0StartTime = x
3360 
# In  --> EOP asserted for 2 bit time at time 2410895000
3361 
# ... Write data 9d to UART done cnt :         36 ...
3362 
#
3363 
#
3364 
# ... Writing char 150 ...
3365 
# CntrlTransType = 10
3366 
# In  --> In task wait for response at time 2422770000
3367 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2423075000
3368 
# In  --> Decoder enabled at time 2423777000 in host
3369 
# In  --> StopTime = x, SE0StartTime = x
3370 
# In  --> receive data = d2
3371 
# In  --> StopTime = x, SE0StartTime = x
3372 
# In  --> EOP asserted for 2 bit time at time 2424587000
3373 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3374 
# CntrlTransType = 10
3375 
# In  --> In task wait for response at time 2427726000
3376 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2428115000
3377 
# In  --> Decoder enabled at time 2428818000 in host
3378 
# In  --> receive data = 4b
3379 
# In  --> receive data = 00
3380 
# In  --> receive data = 00
3381 
# In  --> receive data = 00
3382 
# In  --> receive data = f2
3383 
# In  --> receive data = 7e
3384 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  8f
3385 
# ... Read Data from UART done cnt :        22...
3386 
# In  --> StopTime = x, SE0StartTime = x
3387 
# In  --> receive data = 5e
3388 
# In  --> StopTime = x, SE0StartTime = x
3389 
# In  --> EOP asserted for 2 bit time at time 2433701000
3390 
# In  --> Data toggle recevied is 1001011 at time 2433785000
3391 
# In  --> received byte[1] = 00000000
3392 
# In  --> received byte[2] = 00000000
3393 
# In  --> received byte[3] = 00000000
3394 
# In  --> received byte[4] = 11110010
3395 
# In  --> calculated crc is 8185 at time 2433785000.
3396 
# In  --> received raw crc is 8185 at time 2433785000.
3397 
# In  --> received crc is 7e5e at time 2433785000.
3398 
# In  --> tmpCrc 7e5e, at time 2433785000
3399 
# In  --> sending ACK at time 2435706000
3400 
# RecvBuffer[0]  = 00000000  : 0
3401 
# RecvBuffer[1]  = 00000000  : 0
3402 
# RecvBuffer[2]  = 00000000  : 0
3403 
# RecvBuffer[3]  = 11110010  : 242
3404 
# In  --> In task wait for response at time 2442258000
3405 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2442563000
3406 
# In  --> Decoder enabled at time 2443260000 in host
3407 
# In  --> StopTime = x, SE0StartTime = x
3408 
# In  --> receive data = d2
3409 
# In  --> StopTime = x, SE0StartTime = x
3410 
# In  --> EOP asserted for 2 bit time at time 2444054000
3411 
# CntrlTransType = 11
3412 
# In  --> In task wait for response at time 2455950000
3413 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2456234000
3414 
# In  --> Decoder enabled at time 2456952000 in host
3415 
# In  --> StopTime = x, SE0StartTime = x
3416 
# In  --> receive data = d2
3417 
# In  --> StopTime = x, SE0StartTime = x
3418 
# In  --> EOP asserted for 2 bit time at time 2457746000
3419 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3420 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
3421 
# In  --> DataToggle is 1
3422 
# In  --> DataToggle is 4b at time 2460990000.
3423 
# In  --> sending byte[1] = 00000000
3424 
# In  --> sending byte[2] = 00000000
3425 
# In  --> sending byte[3] = 00000000
3426 
# In  --> sending byte[4] = 11110010
3427 
# In  --> raw crc is 8185 at time             2460990
3428 
# In  --> sent crc is 7e5e at time             2460990
3429 
# In  --> In task wait for response at time 2467038000
3430 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2467322000
3431 
# In  --> Decoder enabled at time 2468038000 in host
3432 
# In  --> StopTime = x, SE0StartTime = x
3433 
# In  --> receive data = d2
3434 
# In  --> StopTime = x, SE0StartTime = x
3435 
# In  --> EOP asserted for 2 bit time at time 2468834000
3436 
# In  --> bits received are 7
3437 
# In  --> ACK received at time 2468834000.
3438 
# Input Address:01, EndPt:0
3439 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
3440 
# In  CntrlTransType = 11, WRITE = 11
3441 
# In  --> In task wait for response at time 2472078000
3442 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2472446000
3443 
# In  --> Decoder enabled at time 2473168000 in host
3444 
# In  --> receive data = 4b
3445 
# In  --> receive data = 00
3446 
# In  --> StopTime = x, SE0StartTime = x
3447 
# In  --> receive data = 00
3448 
# In  --> StopTime = x, SE0StartTime = x
3449 
# In  --> EOP asserted for 2 bit time at time 2475302000
3450 
#
3451 
# ... Reading the UART Status: 000000f2 ...
3452 
# ... Write data 96 to UART done cnt :         37 ...
3453 
#
3454 
#
3455 
# ... Writing char  19 ...
3456 
# CntrlTransType = 10
3457 
# In  --> In task wait for response at time 2489130000
3458 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2489414000
3459 
# In  --> Decoder enabled at time 2490150000 in host
3460 
# In  --> StopTime = x, SE0StartTime = x
3461 
# In  --> receive data = d2
3462 
# In  --> StopTime = x, SE0StartTime = x
3463 
# In  --> EOP asserted for 2 bit time at time 2490947000
3464 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3465 
# CntrlTransType = 10
3466 
# In  --> In task wait for response at time 2494086000
3467 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2494475000
3468 
# In  --> Decoder enabled at time 2495175000 in host
3469 
# In  --> receive data = 4b
3470 
# In  --> receive data = 00
3471 
# In  --> receive data = 00
3472 
# In  --> receive data = 00
3473 
# In  --> receive data = 00
3474 
# In  --> receive data = ff
3475 
# In  --> StopTime = x, SE0StartTime = x
3476 
# In  --> receive data = db
3477 
# In  --> StopTime = x, SE0StartTime = x
3478 
# In  --> EOP asserted for 2 bit time at time 2500061000
3479 
# In  --> Data toggle recevied is 1001011 at time 2500145000
3480 
# In  --> received byte[1] = 00000000
3481 
# In  --> received byte[2] = 00000000
3482 
# In  --> received byte[3] = 00000000
3483 
# In  --> received byte[4] = 00000000
3484 
# In  --> calculated crc is 24 at time 2500145000.
3485 
# In  --> received raw crc is 24 at time 2500145000.
3486 
# In  --> received crc is ffdb at time 2500145000.
3487 
# In  --> tmpCrc ffdb, at time 2500145000
3488 
# In  --> sending ACK at time 2502066000
3489 
# RecvBuffer[0]  = 00000000  : 0
3490 
# RecvBuffer[1]  = 00000000  : 0
3491 
# RecvBuffer[2]  = 00000000  : 0
3492 
# RecvBuffer[3]  = 00000000  : 0
3493 
# In  --> In task wait for response at time 2508618000
3494 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2508923000
3495 
# In  --> Decoder enabled at time 2509638000 in host
3496 
# In  --> StopTime = x, SE0StartTime = x
3497 
# In  --> receive data = d2
3498 
# In  --> StopTime = x, SE0StartTime = x
3499 
# In  --> EOP asserted for 2 bit time at time 2510435000
3500 
# CntrlTransType = 10
3501 
# In  --> In task wait for response at time 2522310000
3502 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2522615000
3503 
# In  --> Decoder enabled at time 2523330000 in host
3504 
# In  --> StopTime = x, SE0StartTime = x
3505 
# In  --> receive data = d2
3506 
# In  --> StopTime = x, SE0StartTime = x
3507 
# In  --> EOP asserted for 2 bit time at time 2524127000
3508 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3509 
# CntrlTransType = 10
3510 
# In  --> In task wait for response at time 2527266000
3511 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2527655000
3512 
# In  --> Decoder enabled at time 2528349000 in host
3513 
# In  --> receive data = 4b
3514 
# In  --> receive data = 00
3515 
# In  --> receive data = 00
3516 
# In  --> receive data = 00
3517 
# In  --> receive data = ce
3518 
# In  --> receive data = 7e
3519 
# In  --> StopTime = x, SE0StartTime = x
3520 
# In  --> receive data = 4f
3521 
# In  --> StopTime = x, SE0StartTime = x
3522 
# In  --> EOP asserted for 2 bit time at time 2533241000
3523 
# In  --> Data toggle recevied is 1001011 at time 2533325000
3524 
# In  --> received byte[1] = 00000000
3525 
# In  --> received byte[2] = 00000000
3526 
# In  --> received byte[3] = 00000000
3527 
# In  --> received byte[4] = 11001110
3528 
# In  --> calculated crc is 810d at time 2533325000.
3529 
# In  --> received raw crc is 810d at time 2533325000.
3530 
# In  --> received crc is 7e4f at time 2533325000.
3531 
# In  --> tmpCrc 7e4f, at time 2533325000
3532 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  f2
3533 
# ... Read Data from UART done cnt :        23...
3534 
# In  --> sending ACK at time 2535246000
3535 
# RecvBuffer[0]  = 00000000  : 0
3536 
# RecvBuffer[1]  = 00000000  : 0
3537 
# RecvBuffer[2]  = 00000000  : 0
3538 
# RecvBuffer[3]  = 11001110  : 206
3539 
# In  --> In task wait for response at time 2541798000
3540 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2542103000
3541 
# In  --> Decoder enabled at time 2542812000 in host
3542 
# In  --> StopTime = x, SE0StartTime = x
3543 
# In  --> receive data = d2
3544 
# In  --> StopTime = x, SE0StartTime = x
3545 
# In  --> EOP asserted for 2 bit time at time 2543615000
3546 
# ... Write data 13 to UART done cnt :         38 ...
3547 
#
3548 
#
3549 
# ... Writing char  13 ...
3550 
# CntrlTransType = 11
3551 
# In  --> In task wait for response at time 2555490000
3552 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2555795000
3553 
# In  --> Decoder enabled at time 2556507000 in host
3554 
# In  --> StopTime = x, SE0StartTime = x
3555 
# In  --> receive data = d2
3556 
# In  --> StopTime = x, SE0StartTime = x
3557 
# In  --> EOP asserted for 2 bit time at time 2557307000
3558 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3559 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
3560 
# In  --> DataToggle is 1
3561 
# In  --> DataToggle is 4b at time 2560530000.
3562 
# In  --> sending byte[1] = 00000000
3563 
# In  --> sending byte[2] = 00000000
3564 
# In  --> sending byte[3] = 00000000
3565 
# In  --> sending byte[4] = 11001110
3566 
# In  --> raw crc is 810d at time             2560530
3567 
# In  --> sent crc is 7e4f at time             2560530
3568 
# In  --> In task wait for response at time 2566578000
3569 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2566883000
3570 
# In  --> Decoder enabled at time 2567594000 in host
3571 
# In  --> StopTime = x, SE0StartTime = x
3572 
# In  --> receive data = d2
3573 
# In  --> StopTime = x, SE0StartTime = x
3574 
# In  --> EOP asserted for 2 bit time at time 2568395000
3575 
# In  --> bits received are 7
3576 
# In  --> ACK received at time 2568395000.
3577 
# Input Address:01, EndPt:0
3578 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
3579 
# In  CntrlTransType = 11, WRITE = 11
3580 
# In  --> In task wait for response at time 2571618000
3581 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2572007000
3582 
# In  --> Decoder enabled at time 2572718000 in host
3583 
# In  --> receive data = 4b
3584 
# In  --> receive data = 00
3585 
# In  --> StopTime = x, SE0StartTime = x
3586 
# In  --> receive data = 00
3587 
# In  --> StopTime = x, SE0StartTime = x
3588 
# In  --> EOP asserted for 2 bit time at time 2574863000
3589 
#
3590 
# ... Reading the UART Status: 000000ce ...
3591 
# CntrlTransType = 10
3592 
# In  --> In task wait for response at time 2588670000
3593 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2588975000
3594 
# In  --> Decoder enabled at time 2589682000 in host
3595 
# In  --> StopTime = x, SE0StartTime = x
3596 
# In  --> receive data = d2
3597 
# In  --> StopTime = x, SE0StartTime = x
3598 
# In  --> EOP asserted for 2 bit time at time 2590487000
3599 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3600 
# CntrlTransType = 10
3601 
# In  --> In task wait for response at time 2593626000
3602 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2594015000
3603 
# In  --> Decoder enabled at time 2594725000 in host
3604 
# In  --> receive data = 4b
3605 
# In  --> receive data = 00
3606 
# In  --> receive data = 00
3607 
# In  --> receive data = 00
3608 
# In  --> receive data = 00
3609 
# In  --> receive data = ff
3610 
# In  --> StopTime = x, SE0StartTime = x
3611 
# In  --> receive data = db
3612 
# In  --> StopTime = x, SE0StartTime = x
3613 
# In  --> EOP asserted for 2 bit time at time 2599622000
3614 
# In  --> Data toggle recevied is 1001011 at time 2599706000
3615 
# In  --> received byte[1] = 00000000
3616 
# In  --> received byte[2] = 00000000
3617 
# In  --> received byte[3] = 00000000
3618 
# In  --> received byte[4] = 00000000
3619 
# In  --> calculated crc is 24 at time 2599706000.
3620 
# In  --> received raw crc is 24 at time 2599706000.
3621 
# In  --> received crc is ffdb at time 2599706000.
3622 
# In  --> tmpCrc ffdb, at time 2599706000
3623 
# In  --> sending ACK at time 2601606000
3624 
# RecvBuffer[0]  = 00000000  : 0
3625 
# RecvBuffer[1]  = 00000000  : 0
3626 
# RecvBuffer[2]  = 00000000  : 0
3627 
# RecvBuffer[3]  = 00000000  : 0
3628 
# In  --> In task wait for response at time 2608158000
3629 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2608442000
3630 
# In  --> Decoder enabled at time 2609167000 in host
3631 
# In  --> StopTime = x, SE0StartTime = x
3632 
# In  --> receive data = d2
3633 
# In  --> StopTime = x, SE0StartTime = x
3634 
# In  --> EOP asserted for 2 bit time at time 2609954000
3635 
# ... Write data 0d to UART done cnt :         39 ...
3636 
#
3637 
#
3638 
# ... Writing char  83 ...
3639 
# CntrlTransType = 10
3640 
# In  --> In task wait for response at time 2621850000
3641 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2622134000
3642 
# In  --> Decoder enabled at time 2622859000 in host
3643 
# In  --> StopTime = x, SE0StartTime = x
3644 
# In  --> receive data = d2
3645 
# In  --> StopTime = x, SE0StartTime = x
3646 
# In  --> EOP asserted for 2 bit time at time 2623646000
3647 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3648 
# CntrlTransType = 10
3649 
# In  --> In task wait for response at time 2626806000
3650 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2627174000
3651 
# In  --> Decoder enabled at time 2627905000 in host
3652 
# In  --> receive data = 4b
3653 
# In  --> receive data = 00
3654 
# In  --> receive data = 00
3655 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  ce
3656 
# ... Read Data from UART done cnt :        24...
3657 
# In  --> receive data = 00
3658 
# In  --> receive data = e8
3659 
# In  --> receive data = ff
3660 
# In  --> StopTime = x, SE0StartTime = x
3661 
# In  --> receive data = 95
3662 
# In  --> StopTime = x, SE0StartTime = x
3663 
# In  --> EOP asserted for 2 bit time at time 2632865000
3664 
# In  --> Data toggle recevied is 1001011 at time 2632949000
3665 
# In  --> received byte[1] = 00000000
3666 
# In  --> received byte[2] = 00000000
3667 
# In  --> received byte[3] = 00000000
3668 
# In  --> received byte[4] = 11101000
3669 
# In  --> calculated crc is 56 at time 2632949000.
3670 
# In  --> received raw crc is 56 at time 2632949000.
3671 
# In  --> received crc is ff95 at time 2632949000.
3672 
# In  --> tmpCrc ff95, at time 2632949000
3673 
# In  --> sending ACK at time 2634870000
3674 
# RecvBuffer[0]  = 00000000  : 0
3675 
# RecvBuffer[1]  = 00000000  : 0
3676 
# RecvBuffer[2]  = 00000000  : 0
3677 
# RecvBuffer[3]  = 11101000  : 232
3678 
# In  --> In task wait for response at time 2641422000
3679 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2641727000
3680 
# In  --> Decoder enabled at time 2642428000 in host
3681 
# In  --> StopTime = x, SE0StartTime = x
3682 
# In  --> receive data = d2
3683 
# In  --> StopTime = x, SE0StartTime = x
3684 
# In  --> EOP asserted for 2 bit time at time 2643239000
3685 
# CntrlTransType = 11
3686 
# In  --> In task wait for response at time 2655114000
3687 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2655419000
3688 
# In  --> Decoder enabled at time 2656119000 in host
3689 
# In  --> StopTime = x, SE0StartTime = x
3690 
# In  --> receive data = d2
3691 
# In  --> StopTime = x, SE0StartTime = x
3692 
# In  --> EOP asserted for 2 bit time at time 2656931000
3693 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3694 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
3695 
# In  --> DataToggle is 1
3696 
# In  --> DataToggle is 4b at time 2660154000.
3697 
# In  --> sending byte[1] = 00000000
3698 
# In  --> sending byte[2] = 00000000
3699 
# In  --> sending byte[3] = 00000000
3700 
# In  --> sending byte[4] = 11101000
3701 
# In  --> raw crc is 56 at time             2660154
3702 
# In  --> sent crc is ff95 at time             2660154
3703 
# In  --> In task wait for response at time 2666286000
3704 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2666591000
3705 
# In  --> Decoder enabled at time 2667290000 in host
3706 
# In  --> StopTime = x, SE0StartTime = x
3707 
# In  --> receive data = d2
3708 
# In  --> StopTime = x, SE0StartTime = x
3709 
# In  --> EOP asserted for 2 bit time at time 2668103000
3710 
# In  --> bits received are 7
3711 
# In  --> ACK received at time 2668103000.
3712 
# Input Address:01, EndPt:0
3713 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
3714 
# In  CntrlTransType = 11, WRITE = 11
3715 
# In  --> In task wait for response at time 2671326000
3716 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2671715000
3717 
# In  --> Decoder enabled at time 2672416000 in host
3718 
# In  --> receive data = 4b
3719 
# In  --> receive data = 00
3720 
# In  --> StopTime = x, SE0StartTime = x
3721 
# In  --> receive data = 00
3722 
# In  --> StopTime = x, SE0StartTime = x
3723 
# In  --> EOP asserted for 2 bit time at time 2674550000
3724 
#
3725 
# ... Reading the UART Status: 000000ea ...
3726 
# ... Write data 53 to UART done cnt :         40 ...
3727 
#
3728 
# CntrlTransType = 10
3729 
# In  --> In task wait for response at time 2688378000
3730 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2688662000
3731 
# In  --> Decoder enabled at time 2689383000 in host
3732 
# In  --> StopTime = x, SE0StartTime = x
3733 
# In  --> receive data = d2
3734 
# In  --> StopTime = x, SE0StartTime = x
3735 
# In  --> EOP asserted for 2 bit time at time 2690174000
3736 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3737 
# CntrlTransType = 10
3738 
# In  --> In task wait for response at time 2693334000
3739 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2693702000
3740 
# In  --> Decoder enabled at time 2694423000 in host
3741 
# In  --> receive data = 4b
3742 
# In  --> receive data = 00
3743 
# In  --> receive data = 00
3744 
# In  --> receive data = 00
3745 
# In  --> receive data = 00
3746 
# In  --> receive data = ff
3747 
# In  --> StopTime = x, SE0StartTime = x
3748 
# In  --> receive data = db
3749 
# In  --> StopTime = x, SE0StartTime = x
3750 
# In  --> EOP asserted for 2 bit time at time 2699309000
3751 
# In  --> Data toggle recevied is 1001011 at time 2699393000
3752 
# In  --> received byte[1] = 00000000
3753 
# In  --> received byte[2] = 00000000
3754 
# In  --> received byte[3] = 00000000
3755 
# In  --> received byte[4] = 00000000
3756 
# In  --> calculated crc is 24 at time 2699393000.
3757 
# In  --> received raw crc is 24 at time 2699393000.
3758 
# In  --> received crc is ffdb at time 2699393000.
3759 
# In  --> tmpCrc ffdb, at time 2699393000
3760 
# In  --> sending ACK at time 2701314000
3761 
# RecvBuffer[0]  = 00000000  : 0
3762 
# RecvBuffer[1]  = 00000000  : 0
3763 
# RecvBuffer[2]  = 00000000  : 0
3764 
# RecvBuffer[3]  = 00000000  : 0
3765 
# In  --> In task wait for response at time 2707866000
3766 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2708171000
3767 
# In  --> Decoder enabled at time 2708886000 in host
3768 
# In  --> StopTime = x, SE0StartTime = x
3769 
# In  --> receive data = d2
3770 
# In  --> StopTime = x, SE0StartTime = x
3771 
# In  --> EOP asserted for 2 bit time at time 2709683000
3772 
# CntrlTransType = 10
3773 
# In  --> In task wait for response at time 2721558000
3774 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2721863000
3775 
# In  --> Decoder enabled at time 2722581000 in host
3776 
# In  --> StopTime = x, SE0StartTime = x
3777 
# In  --> receive data = d2
3778 
# In  --> StopTime = x, SE0StartTime = x
3779 
# In  --> EOP asserted for 2 bit time at time 2723375000
3780 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3781 
# CntrlTransType = 10
3782 
# In  --> In task wait for response at time 2726514000
3783 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2726903000
3784 
# In  --> Decoder enabled at time 2727601000 in host
3785 
# In  --> receive data = 4b
3786 
# In  --> receive data = 00
3787 
# In  --> receive data = 00
3788 
# In  --> receive data = 00
3789 
# In  --> receive data = c5
3790 
# In  --> receive data = 3f
3791 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  e8
3792 
# ... Read Data from UART done cnt :        25...
3793 
# In  --> StopTime = x, SE0StartTime = x
3794 
# In  --> receive data = 88
3795 
# In  --> StopTime = x, SE0StartTime = x
3796 
# In  --> EOP asserted for 2 bit time at time 2732489000
3797 
# In  --> Data toggle recevied is 1001011 at time 2732573000
3798 
# In  --> received byte[1] = 00000000
3799 
# In  --> received byte[2] = 00000000
3800 
# In  --> received byte[3] = 00000000
3801 
# In  --> received byte[4] = 11000101
3802 
# In  --> calculated crc is 3ee at time 2732573000.
3803 
# In  --> received raw crc is 3ee at time 2732573000.
3804 
# In  --> received crc is 3f88 at time 2732573000.
3805 
# In  --> tmpCrc 3f88, at time 2732573000
3806 
# In  --> sending ACK at time 2734494000
3807 
# RecvBuffer[0]  = 00000000  : 0
3808 
# RecvBuffer[1]  = 00000000  : 0
3809 
# RecvBuffer[2]  = 00000000  : 0
3810 
# RecvBuffer[3]  = 11000101  : 197
3811 
# In  --> In task wait for response at time 2741046000
3812 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2741351000
3813 
# In  --> Decoder enabled at time 2742064000 in host
3814 
# In  --> StopTime = x, SE0StartTime = x
3815 
# In  --> receive data = d2
3816 
# In  --> StopTime = x, SE0StartTime = x
3817 
# In  --> EOP asserted for 2 bit time at time 2742863000
3818 
# CntrlTransType = 11
3819 
# In  --> In task wait for response at time 2754738000
3820 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2755043000
3821 
# In  --> Decoder enabled at time 2755755000 in host
3822 
# In  --> StopTime = x, SE0StartTime = x
3823 
# In  --> receive data = d2
3824 
# In  --> StopTime = x, SE0StartTime = x
3825 
# In  --> EOP asserted for 2 bit time at time 2756555000
3826 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3827 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
3828 
# In  --> DataToggle is 1
3829 
# In  --> DataToggle is 4b at time 2759778000.
3830 
# In  --> sending byte[1] = 00000000
3831 
# In  --> sending byte[2] = 00000000
3832 
# In  --> sending byte[3] = 00000000
3833 
# In  --> sending byte[4] = 11000101
3834 
# In  --> raw crc is 3ee at time             2759778
3835 
# In  --> sent crc is 3f88 at time             2759778
3836 
# In  --> In task wait for response at time 2765826000
3837 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2766131000
3838 
# In  --> Decoder enabled at time 2766842000 in host
3839 
# In  --> StopTime = x, SE0StartTime = x
3840 
# In  --> receive data = d2
3841 
# In  --> StopTime = x, SE0StartTime = x
3842 
# In  --> EOP asserted for 2 bit time at time 2767643000
3843 
# In  --> bits received are 7
3844 
# In  --> ACK received at time 2767643000.
3845 
# Input Address:01, EndPt:0
3846 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
3847 
# In  CntrlTransType = 11, WRITE = 11
3848 
# In  --> In task wait for response at time 2770866000
3849 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2771255000
3850 
# In  --> Decoder enabled at time 2771972000 in host
3851 
# In  --> receive data = 4b
3852 
# In  --> receive data = 00
3853 
# In  --> StopTime = x, SE0StartTime = x
3854 
# In  --> receive data = 00
3855 
# In  --> StopTime = x, SE0StartTime = x
3856 
# In  --> EOP asserted for 2 bit time at time 2774111000
3857 
#
3858 
# ... Reading the UART Status: 000000c7 ...
3859 
# CntrlTransType = 10
3860 
# In  --> In task wait for response at time 2787918000
3861 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2788223000
3862 
# In  --> Decoder enabled at time 2788933000 in host
3863 
# In  --> StopTime = x, SE0StartTime = x
3864 
# In  --> receive data = d2
3865 
# In  --> StopTime = x, SE0StartTime = x
3866 
# In  --> EOP asserted for 2 bit time at time 2789735000
3867 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3868 
# CntrlTransType = 10
3869 
# In  --> In task wait for response at time 2792874000
3870 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2793179000
3871 
# In  --> Decoder enabled at time 2793893000 in host
3872 
# In  --> receive data = 4b
3873 
# In  --> receive data = 00
3874 
# In  --> receive data = 00
3875 
# In  --> receive data = 00
3876 
# In  --> receive data = 00
3877 
# In  --> receive data = ff
3878 
# In  --> StopTime = x, SE0StartTime = x
3879 
# In  --> receive data = db
3880 
# In  --> StopTime = x, SE0StartTime = x
3881 
# In  --> EOP asserted for 2 bit time at time 2798786000
3882 
# In  --> Data toggle recevied is 1001011 at time 2798870000
3883 
# In  --> received byte[1] = 00000000
3884 
# In  --> received byte[2] = 00000000
3885 
# In  --> received byte[3] = 00000000
3886 
# In  --> received byte[4] = 00000000
3887 
# In  --> calculated crc is 24 at time 2798870000.
3888 
# In  --> received raw crc is 24 at time 2798870000.
3889 
# In  --> received crc is ffdb at time 2798870000.
3890 
# In  --> tmpCrc ffdb, at time 2798870000
3891 
# In  --> sending ACK at time 2800770000
3892 
# RecvBuffer[0]  = 00000000  : 0
3893 
# RecvBuffer[1]  = 00000000  : 0
3894 
# RecvBuffer[2]  = 00000000  : 0
3895 
# RecvBuffer[3]  = 00000000  : 0
3896 
# In  --> In task wait for response at time 2807322000
3897 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2807606000
3898 
# In  --> Decoder enabled at time 2808335000 in host
3899 
# In  --> StopTime = x, SE0StartTime = x
3900 
# In  --> receive data = d2
3901 
# In  --> StopTime = x, SE0StartTime = x
3902 
# In  --> EOP asserted for 2 bit time at time 2809139000
3903 
# CntrlTransType = 10
3904 
# In  --> In task wait for response at time 2821014000
3905 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2821319000
3906 
# In  --> Decoder enabled at time 2822027000 in host
3907 
# In  --> StopTime = x, SE0StartTime = x
3908 
# In  --> receive data = d2
3909 
# In  --> StopTime = x, SE0StartTime = x
3910 
# In  --> EOP asserted for 2 bit time at time 2822831000
3911 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3912 
# CntrlTransType = 10
3913 
# In  --> In task wait for response at time 2825970000
3914 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2826275000
3915 
# In  --> Decoder enabled at time 2826987000 in host
3916 
# In  --> receive data = 4b
3917 
# In  --> receive data = 00
3918 
# In  --> receive data = 00
3919 
# In  --> receive data = 00
3920 
# In  --> receive data = 5c
3921 
# In  --> receive data = ff
3922 
# In  --> StopTime = x, SE0StartTime = x
3923 
# In  --> receive data = e2
3924 
# In  --> StopTime = x, SE0StartTime = x
3925 
# In  --> EOP asserted for 2 bit time at time 2831882000
3926 
# In  --> Data toggle recevied is 1001011 at time 2831966000
3927 
# In  --> received byte[1] = 00000000
3928 
# In  --> received byte[2] = 00000000
3929 
# In  --> received byte[3] = 00000000
3930 
# In  --> received byte[4] = 01011100
3931 
# In  --> calculated crc is b8 at time 2831966000.
3932 
# In  --> received raw crc is b8 at time 2831966000.
3933 
# In  --> received crc is ffe2 at time 2831966000.
3934 
# In  --> tmpCrc ffe2, at time 2831966000
3935 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  c5
3936 
# ... Read Data from UART done cnt :        26...
3937 
# In  --> sending ACK at time 2833866000
3938 
# RecvBuffer[0]  = 00000000  : 0
3939 
# RecvBuffer[1]  = 00000000  : 0
3940 
# RecvBuffer[2]  = 00000000  : 0
3941 
# RecvBuffer[3]  = 01011100  : 92
3942 
# In  --> In task wait for response at time 2840418000
3943 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2840702000
3944 
# In  --> Decoder enabled at time 2841429000 in host
3945 
# In  --> StopTime = x, SE0StartTime = x
3946 
# In  --> receive data = d2
3947 
# In  --> StopTime = x, SE0StartTime = x
3948 
# In  --> EOP asserted for 2 bit time at time 2842214000
3949 
# CntrlTransType = 11
3950 
# In  --> In task wait for response at time 2854110000
3951 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2854394000
3952 
# In  --> Decoder enabled at time 2855121000 in host
3953 
# In  --> StopTime = x, SE0StartTime = x
3954 
# In  --> receive data = d2
3955 
# In  --> StopTime = x, SE0StartTime = x
3956 
# In  --> EOP asserted for 2 bit time at time 2855906000
3957 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3958 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
3959 
# In  --> DataToggle is 1
3960 
# In  --> DataToggle is 4b at time 2859150000.
3961 
# In  --> sending byte[1] = 00000000
3962 
# In  --> sending byte[2] = 00000000
3963 
# In  --> sending byte[3] = 00000000
3964 
# In  --> sending byte[4] = 01011100
3965 
# In  --> raw crc is b8 at time             2859150
3966 
# In  --> sent crc is ffe2 at time             2859150
3967 
# In  --> In task wait for response at time 2865198000
3968 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2865482000
3969 
# In  --> Decoder enabled at time 2866207000 in host
3970 
# In  --> StopTime = x, SE0StartTime = x
3971 
# In  --> receive data = d2
3972 
# In  --> StopTime = x, SE0StartTime = x
3973 
# In  --> EOP asserted for 2 bit time at time 2866994000
3974 
# In  --> bits received are 7
3975 
# In  --> ACK received at time 2866994000.
3976 
# Input Address:01, EndPt:0
3977 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
3978 
# In  CntrlTransType = 11, WRITE = 11
3979 
# In  --> In task wait for response at time 2870238000
3980 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2870606000
3981 
# In  --> Decoder enabled at time 2871337000 in host
3982 
# In  --> receive data = 4b
3983 
# In  --> receive data = 00
3984 
# In  --> StopTime = x, SE0StartTime = x
3985 
# In  --> receive data = 00
3986 
# In  --> StopTime = x, SE0StartTime = x
3987 
# In  --> EOP asserted for 2 bit time at time 2873462000
3988 
#
3989 
# ... Reading the UART Status: 0000005e ...
3990 
# CntrlTransType = 10
3991 
# In  --> In task wait for response at time 2887290000
3992 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2887574000
3993 
# In  --> Decoder enabled at time 2888298000 in host
3994 
# In  --> StopTime = x, SE0StartTime = x
3995 
# In  --> receive data = d2
3996 
# In  --> StopTime = x, SE0StartTime = x
3997 
# In  --> EOP asserted for 2 bit time at time 2889086000
3998 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
3999 
# CntrlTransType = 10
4000 
# In  --> In task wait for response at time 2892246000
4001 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2892614000
4002 
# In  --> Decoder enabled at time 2893344000 in host
4003 
# In  --> receive data = 4b
4004 
# In  --> receive data = 00
4005 
# In  --> receive data = 00
4006 
# In  --> receive data = 00
4007 
# In  --> receive data = 00
4008 
# In  --> receive data = ff
4009 
# In  --> StopTime = x, SE0StartTime = x
4010 
# In  --> receive data = db
4011 
# In  --> StopTime = x, SE0StartTime = x
4012 
# In  --> EOP asserted for 2 bit time at time 2898221000
4013 
# In  --> Data toggle recevied is 1001011 at time 2898305000
4014 
# In  --> received byte[1] = 00000000
4015 
# In  --> received byte[2] = 00000000
4016 
# In  --> received byte[3] = 00000000
4017 
# In  --> received byte[4] = 00000000
4018 
# In  --> calculated crc is 24 at time 2898305000.
4019 
# In  --> received raw crc is 24 at time 2898305000.
4020 
# In  --> received crc is ffdb at time 2898305000.
4021 
# In  --> tmpCrc ffdb, at time 2898305000
4022 
# In  --> sending ACK at time 2900226000
4023 
# RecvBuffer[0]  = 00000000  : 0
4024 
# RecvBuffer[1]  = 00000000  : 0
4025 
# RecvBuffer[2]  = 00000000  : 0
4026 
# RecvBuffer[3]  = 00000000  : 0
4027 
# In  --> In task wait for response at time 2906778000
4028 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2907083000
4029 
# In  --> Decoder enabled at time 2907786000 in host
4030 
# In  --> StopTime = x, SE0StartTime = x
4031 
# In  --> receive data = d2
4032 
# In  --> StopTime = x, SE0StartTime = x
4033 
# In  --> EOP asserted for 2 bit time at time 2908595000
4034 
# CntrlTransType = 10
4035 
# In  --> In task wait for response at time 2920470000
4036 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2920775000
4037 
# In  --> Decoder enabled at time 2921478000 in host
4038 
# In  --> StopTime = x, SE0StartTime = x
4039 
# In  --> receive data = d2
4040 
# In  --> StopTime = x, SE0StartTime = x
4041 
# In  --> EOP asserted for 2 bit time at time 2922287000
4042 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4043 
# CntrlTransType = 10
4044 
# In  --> In task wait for response at time 2925426000
4045 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2925815000
4046 
# In  --> Decoder enabled at time 2926518000 in host
4047 
# In  --> receive data = 4b
4048 
# In  --> receive data = 00
4049 
# In  --> receive data = 00
4050 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  5c
4051 
# ... Read Data from UART done cnt :        27...
4052 
# In  --> receive data = 00
4053 
# In  --> receive data = bd
4054 
# In  --> receive data = 3f
4055 
# In  --> StopTime = x, SE0StartTime = x
4056 
# In  --> receive data = aa
4057 
# In  --> StopTime = x, SE0StartTime = x
4058 
# In  --> EOP asserted for 2 bit time at time 2931401000
4059 
# In  --> Data toggle recevied is 1001011 at time 2931485000
4060 
# In  --> received byte[1] = 00000000
4061 
# In  --> received byte[2] = 00000000
4062 
# In  --> received byte[3] = 00000000
4063 
# In  --> received byte[4] = 10111101
4064 
# In  --> calculated crc is 3aa at time 2931485000.
4065 
# In  --> received raw crc is 3aa at time 2931485000.
4066 
# In  --> received crc is 3faa at time 2931485000.
4067 
# In  --> tmpCrc 3faa, at time 2931485000
4068 
# In  --> sending ACK at time 2933406000
4069 
# RecvBuffer[0]  = 00000000  : 0
4070 
# RecvBuffer[1]  = 00000000  : 0
4071 
# RecvBuffer[2]  = 00000000  : 0
4072 
# RecvBuffer[3]  = 10111101  : 189
4073 
# In  --> In task wait for response at time 2939958000
4074 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2940263000
4075 
# In  --> Decoder enabled at time 2940961000 in host
4076 
# In  --> StopTime = x, SE0StartTime = x
4077 
# In  --> receive data = d2
4078 
# In  --> StopTime = x, SE0StartTime = x
4079 
# In  --> EOP asserted for 2 bit time at time 2941754000
4080 
# CntrlTransType = 11
4081 
# In  --> In task wait for response at time 2953650000
4082 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2953934000
4083 
# In  --> Decoder enabled at time 2954652000 in host
4084 
# In  --> StopTime = x, SE0StartTime = x
4085 
# In  --> receive data = d2
4086 
# In  --> StopTime = x, SE0StartTime = x
4087 
# In  --> EOP asserted for 2 bit time at time 2955446000
4088 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4089 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
4090 
# In  --> DataToggle is 1
4091 
# In  --> DataToggle is 4b at time 2958690000.
4092 
# In  --> sending byte[1] = 00000000
4093 
# In  --> sending byte[2] = 00000000
4094 
# In  --> sending byte[3] = 00000000
4095 
# In  --> sending byte[4] = 10111101
4096 
# In  --> raw crc is 3aa at time             2958690
4097 
# In  --> sent crc is 3faa at time             2958690
4098 
# In  --> In task wait for response at time 2964738000
4099 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2965022000
4100 
# In  --> Decoder enabled at time 2965739000 in host
4101 
# In  --> StopTime = x, SE0StartTime = x
4102 
# In  --> receive data = d2
4103 
# In  --> StopTime = x, SE0StartTime = x
4104 
# In  --> EOP asserted for 2 bit time at time 2966534000
4105 
# In  --> bits received are 7
4106 
# In  --> ACK received at time 2966534000.
4107 
# Input Address:01, EndPt:0
4108 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
4109 
# In  CntrlTransType = 11, WRITE = 11
4110 
# In  --> In task wait for response at time 2969778000
4111 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2970146000
4112 
# In  --> Decoder enabled at time 2970869000 in host
4113 
# In  --> receive data = 4b
4114 
# In  --> receive data = 00
4115 
# In  --> StopTime = x, SE0StartTime = x
4116 
# In  --> receive data = 00
4117 
# In  --> StopTime = x, SE0StartTime = x
4118 
# In  --> EOP asserted for 2 bit time at time 2973002000
4119 
#
4120 
# ... Reading the UART Status: 000000bf ...
4121 
# CntrlTransType = 10
4122 
# In  --> In task wait for response at time 2986830000
4123 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2987114000
4124 
# In  --> Decoder enabled at time 2987830000 in host
4125 
# In  --> StopTime = x, SE0StartTime = x
4126 
# In  --> receive data = d2
4127 
# In  --> StopTime = x, SE0StartTime = x
4128 
# In  --> EOP asserted for 2 bit time at time 2988626000
4129 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4130 
# CntrlTransType = 10
4131 
# In  --> In task wait for response at time 2991786000
4132 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 2992154000
4133 
# In  --> Decoder enabled at time 2992876000 in host
4134 
# In  --> receive data = 4b
4135 
# In  --> receive data = 00
4136 
# In  --> receive data = 00
4137 
# In  --> receive data = 00
4138 
# In  --> receive data = 00
4139 
# In  --> receive data = ff
4140 
# In  --> StopTime = x, SE0StartTime = x
4141 
# In  --> receive data = db
4142 
# In  --> StopTime = x, SE0StartTime = x
4143 
# In  --> EOP asserted for 2 bit time at time 2997761000
4144 
# In  --> Data toggle recevied is 1001011 at time 2997845000
4145 
# In  --> received byte[1] = 00000000
4146 
# In  --> received byte[2] = 00000000
4147 
# In  --> received byte[3] = 00000000
4148 
# In  --> received byte[4] = 00000000
4149 
# In  --> calculated crc is 24 at time 2997845000.
4150 
# In  --> received raw crc is 24 at time 2997845000.
4151 
# In  --> received crc is ffdb at time 2997845000.
4152 
# In  --> tmpCrc ffdb, at time 2997845000
4153 
# In  --> sending ACK at time 2999766000
4154 
# RecvBuffer[0]  = 00000000  : 0
4155 
# RecvBuffer[1]  = 00000000  : 0
4156 
# RecvBuffer[2]  = 00000000  : 0
4157 
# RecvBuffer[3]  = 00000000  : 0
4158 
# In  --> In task wait for response at time 3006318000
4159 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3006623000
4160 
# In  --> Decoder enabled at time 3007339000 in host
4161 
# In  --> StopTime = x, SE0StartTime = x
4162 
# In  --> receive data = d2
4163 
# In  --> StopTime = x, SE0StartTime = x
4164 
# In  --> EOP asserted for 2 bit time at time 3008135000
4165 
# CntrlTransType = 10
4166 
# In  --> In task wait for response at time 3020010000
4167 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3020315000
4168 
# In  --> Decoder enabled at time 3021028000 in host
4169 
# In  --> StopTime = x, SE0StartTime = x
4170 
# In  --> receive data = d2
4171 
# In  --> StopTime = x, SE0StartTime = x
4172 
# In  --> EOP asserted for 2 bit time at time 3021827000
4173 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4174 
# CntrlTransType = 10
4175 
# In  --> In task wait for response at time 3024966000
4176 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3025355000
4177 
# In  --> Decoder enabled at time 3026053000 in host
4178 
# In  --> receive data = 4b
4179 
# In  --> receive data = 00
4180 
# In  --> receive data = 00
4181 
# In  --> receive data = 00
4182 
# In  --> receive data = 2d
4183 
# In  --> receive data = 3f
4184 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  bd
4185 
# ... Read Data from UART done cnt :        28...
4186 
# In  --> StopTime = x, SE0StartTime = x
4187 
# In  --> receive data = c6
4188 
# In  --> StopTime = x, SE0StartTime = x
4189 
# In  --> EOP asserted for 2 bit time at time 3030941000
4190 
# In  --> Data toggle recevied is 1001011 at time 3031025000
4191 
# In  --> received byte[1] = 00000000
4192 
# In  --> received byte[2] = 00000000
4193 
# In  --> received byte[3] = 00000000
4194 
# In  --> received byte[4] = 00101101
4195 
# In  --> calculated crc is 39c at time 3031025000.
4196 
# In  --> received raw crc is 39c at time 3031025000.
4197 
# In  --> received crc is 3fc6 at time 3031025000.
4198 
# In  --> tmpCrc 3fc6, at time 3031025000
4199 
# In  --> sending ACK at time 3032946000
4200 
# RecvBuffer[0]  = 00000000  : 0
4201 
# RecvBuffer[1]  = 00000000  : 0
4202 
# RecvBuffer[2]  = 00000000  : 0
4203 
# RecvBuffer[3]  = 00101101  : 45
4204 
# In  --> In task wait for response at time 3039498000
4205 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3039803000
4206 
# In  --> Decoder enabled at time 3040516000 in host
4207 
# In  --> StopTime = x, SE0StartTime = x
4208 
# In  --> receive data = d2
4209 
# In  --> StopTime = x, SE0StartTime = x
4210 
# In  --> EOP asserted for 2 bit time at time 3041315000
4211 
# CntrlTransType = 11
4212 
# In  --> In task wait for response at time 3053190000
4213 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3053495000
4214 
# In  --> Decoder enabled at time 3054208000 in host
4215 
# In  --> StopTime = x, SE0StartTime = x
4216 
# In  --> receive data = d2
4217 
# In  --> StopTime = x, SE0StartTime = x
4218 
# In  --> EOP asserted for 2 bit time at time 3055007000
4219 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4220 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
4221 
# In  --> DataToggle is 1
4222 
# In  --> DataToggle is 4b at time 3058230000.
4223 
# In  --> sending byte[1] = 00000000
4224 
# In  --> sending byte[2] = 00000000
4225 
# In  --> sending byte[3] = 00000000
4226 
# In  --> sending byte[4] = 00101101
4227 
# In  --> raw crc is 39c at time             3058230
4228 
# In  --> sent crc is 3fc6 at time             3058230
4229 
# In  --> In task wait for response at time 3064278000
4230 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3064583000
4231 
# In  --> Decoder enabled at time 3065295000 in host
4232 
# In  --> StopTime = x, SE0StartTime = x
4233 
# In  --> receive data = d2
4234 
# In  --> StopTime = x, SE0StartTime = x
4235 
# In  --> EOP asserted for 2 bit time at time 3066095000
4236 
# In  --> bits received are 7
4237 
# In  --> ACK received at time 3066095000.
4238 
# Input Address:01, EndPt:0
4239 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
4240 
# In  CntrlTransType = 11, WRITE = 11
4241 
# In  --> In task wait for response at time 3069318000
4242 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3069623000
4243 
# In  --> Decoder enabled at time 3070338000 in host
4244 
# In  --> receive data = 4b
4245 
# In  --> receive data = 00
4246 
# In  --> StopTime = x, SE0StartTime = x
4247 
# In  --> receive data = 00
4248 
# In  --> StopTime = x, SE0StartTime = x
4249 
# In  --> EOP asserted for 2 bit time at time 3072479000
4250 
#
4251 
# ... Reading the UART Status: 0000002f ...
4252 
# CntrlTransType = 10
4253 
# In  --> In task wait for response at time 3086286000
4254 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3086591000
4255 
# In  --> Decoder enabled at time 3087302000 in host
4256 
# In  --> StopTime = x, SE0StartTime = x
4257 
# In  --> receive data = d2
4258 
# In  --> StopTime = x, SE0StartTime = x
4259 
# In  --> EOP asserted for 2 bit time at time 3088103000
4260 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4261 
# CntrlTransType = 10
4262 
# In  --> In task wait for response at time 3091242000
4263 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3091547000
4264 
# In  --> Decoder enabled at time 3092262000 in host
4265 
# In  --> receive data = 4b
4266 
# In  --> receive data = 00
4267 
# In  --> receive data = 00
4268 
# In  --> receive data = 00
4269 
# In  --> receive data = 00
4270 
# In  --> receive data = ff
4271 
# In  --> StopTime = x, SE0StartTime = x
4272 
# In  --> receive data = db
4273 
# In  --> StopTime = x, SE0StartTime = x
4274 
# In  --> EOP asserted for 2 bit time at time 3097154000
4275 
# In  --> Data toggle recevied is 1001011 at time 3097238000
4276 
# In  --> received byte[1] = 00000000
4277 
# In  --> received byte[2] = 00000000
4278 
# In  --> received byte[3] = 00000000
4279 
# In  --> received byte[4] = 00000000
4280 
# In  --> calculated crc is 24 at time 3097238000.
4281 
# In  --> received raw crc is 24 at time 3097238000.
4282 
# In  --> received crc is ffdb at time 3097238000.
4283 
# In  --> tmpCrc ffdb, at time 3097238000
4284 
# In  --> sending ACK at time 3099138000
4285 
# RecvBuffer[0]  = 00000000  : 0
4286 
# RecvBuffer[1]  = 00000000  : 0
4287 
# RecvBuffer[2]  = 00000000  : 0
4288 
# RecvBuffer[3]  = 00000000  : 0
4289 
# In  --> In task wait for response at time 3105690000
4290 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3105974000
4291 
# In  --> Decoder enabled at time 3106704000 in host
4292 
# In  --> StopTime = x, SE0StartTime = x
4293 
# In  --> receive data = d2
4294 
# In  --> StopTime = x, SE0StartTime = x
4295 
# In  --> EOP asserted for 2 bit time at time 3107486000
4296 
# CntrlTransType = 10
4297 
# In  --> In task wait for response at time 3119382000
4298 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3119666000
4299 
# In  --> Decoder enabled at time 3120396000 in host
4300 
# In  --> StopTime = x, SE0StartTime = x
4301 
# In  --> receive data = d2
4302 
# In  --> StopTime = x, SE0StartTime = x
4303 
# In  --> EOP asserted for 2 bit time at time 3121178000
4304 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4305 
# CntrlTransType = 10
4306 
# In  --> In task wait for response at time 3124338000
4307 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3124706000
4308 
# In  --> Decoder enabled at time 3125439000 in host
4309 
# In  --> receive data = 4b
4310 
# In  --> receive data = 00
4311 
# In  --> receive data = 00
4312 
# In  --> receive data = 00
4313 
# In  --> receive data = 65
4314 
# In  --> receive data = 3f
4315 
# In  --> StopTime = x, SE0StartTime = x
4316 
# In  --> receive data = f0
4317 
# In  --> StopTime = x, SE0StartTime = x
4318 
# In  --> EOP asserted for 2 bit time at time 3130334000
4319 
# In  --> Data toggle recevied is 1001011 at time 3130418000
4320 
# In  --> received byte[1] = 00000000
4321 
# In  --> received byte[2] = 00000000
4322 
# In  --> received byte[3] = 00000000
4323 
# In  --> received byte[4] = 01100101
4324 
# In  --> calculated crc is 3f0 at time 3130418000.
4325 
# In  --> received raw crc is 3f0 at time 3130418000.
4326 
# In  --> received crc is 3ff0 at time 3130418000.
4327 
# In  --> tmpCrc 3ff0, at time 3130418000
4328 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  2d
4329 
# ... Read Data from UART done cnt :        29...
4330 
# In  --> sending ACK at time 3132318000
4331 
# RecvBuffer[0]  = 00000000  : 0
4332 
# RecvBuffer[1]  = 00000000  : 0
4333 
# RecvBuffer[2]  = 00000000  : 0
4334 
# RecvBuffer[3]  = 01100101  : 101
4335 
# In  --> In task wait for response at time 3138870000
4336 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3139154000
4337 
# In  --> Decoder enabled at time 3139878000 in host
4338 
# In  --> StopTime = x, SE0StartTime = x
4339 
# In  --> receive data = d2
4340 
# In  --> StopTime = x, SE0StartTime = x
4341 
# In  --> EOP asserted for 2 bit time at time 3140666000
4342 
# CntrlTransType = 11
4343 
# In  --> In task wait for response at time 3152562000
4344 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3152846000
4345 
# In  --> Decoder enabled at time 3153573000 in host
4346 
# In  --> StopTime = x, SE0StartTime = x
4347 
# In  --> receive data = d2
4348 
# In  --> StopTime = x, SE0StartTime = x
4349 
# In  --> EOP asserted for 2 bit time at time 3154358000
4350 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4351 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
4352 
# In  --> DataToggle is 1
4353 
# In  --> DataToggle is 4b at time 3157602000.
4354 
# In  --> sending byte[1] = 00000000
4355 
# In  --> sending byte[2] = 00000000
4356 
# In  --> sending byte[3] = 00000000
4357 
# In  --> sending byte[4] = 01100101
4358 
# In  --> raw crc is 3f0 at time             3157602
4359 
# In  --> sent crc is 3ff0 at time             3157602
4360 
# In  --> In task wait for response at time 3163650000
4361 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3163934000
4362 
# In  --> Decoder enabled at time 3164660000 in host
4363 
# In  --> StopTime = x, SE0StartTime = x
4364 
# In  --> receive data = d2
4365 
# In  --> StopTime = x, SE0StartTime = x
4366 
# In  --> EOP asserted for 2 bit time at time 3165446000
4367 
# In  --> bits received are 7
4368 
# In  --> ACK received at time 3165446000.
4369 
# Input Address:01, EndPt:0
4370 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
4371 
# In  CntrlTransType = 11, WRITE = 11
4372 
# In  --> In task wait for response at time 3168690000
4373 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3169058000
4374 
# In  --> Decoder enabled at time 3169784000 in host
4375 
# In  --> receive data = 4b
4376 
# In  --> receive data = 00
4377 
# In  --> StopTime = x, SE0StartTime = x
4378 
# In  --> receive data = 00
4379 
# In  --> StopTime = x, SE0StartTime = x
4380 
# In  --> EOP asserted for 2 bit time at time 3171914000
4381 
#
4382 
# ... Reading the UART Status: 00000067 ...
4383 
# CntrlTransType = 10
4384 
# In  --> In task wait for response at time 3185742000
4385 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3186026000
4386 
# In  --> Decoder enabled at time 3186748000 in host
4387 
# In  --> StopTime = x, SE0StartTime = x
4388 
# In  --> receive data = d2
4389 
# In  --> StopTime = x, SE0StartTime = x
4390 
# In  --> EOP asserted for 2 bit time at time 3187538000
4391 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4392 
# CntrlTransType = 10
4393 
# In  --> In task wait for response at time 3190698000
4394 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3191066000
4395 
# In  --> Decoder enabled at time 3191791000 in host
4396 
# In  --> receive data = 4b
4397 
# In  --> receive data = 00
4398 
# In  --> receive data = 00
4399 
# In  --> receive data = 00
4400 
# In  --> receive data = 00
4401 
# In  --> receive data = ff
4402 
# In  --> StopTime = x, SE0StartTime = x
4403 
# In  --> receive data = db
4404 
# In  --> StopTime = x, SE0StartTime = x
4405 
# In  --> EOP asserted for 2 bit time at time 3196673000
4406 
# In  --> Data toggle recevied is 1001011 at time 3196757000
4407 
# In  --> received byte[1] = 00000000
4408 
# In  --> received byte[2] = 00000000
4409 
# In  --> received byte[3] = 00000000
4410 
# In  --> received byte[4] = 00000000
4411 
# In  --> calculated crc is 24 at time 3196757000.
4412 
# In  --> received raw crc is 24 at time 3196757000.
4413 
# In  --> received crc is ffdb at time 3196757000.
4414 
# In  --> tmpCrc ffdb, at time 3196757000
4415 
# In  --> sending ACK at time 3198678000
4416 
# RecvBuffer[0]  = 00000000  : 0
4417 
# RecvBuffer[1]  = 00000000  : 0
4418 
# RecvBuffer[2]  = 00000000  : 0
4419 
# RecvBuffer[3]  = 00000000  : 0
4420 
# In  --> In task wait for response at time 3205230000
4421 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3205535000
4422 
# In  --> Decoder enabled at time 3206233000 in host
4423 
# In  --> StopTime = x, SE0StartTime = x
4424 
# In  --> receive data = d2
4425 
# In  --> StopTime = x, SE0StartTime = x
4426 
# In  --> EOP asserted for 2 bit time at time 3207047000
4427 
# CntrlTransType = 10
4428 
# In  --> In task wait for response at time 3218922000
4429 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3219227000
4430 
# In  --> Decoder enabled at time 3219925000 in host
4431 
# In  --> StopTime = x, SE0StartTime = x
4432 
# In  --> receive data = d2
4433 
# In  --> StopTime = x, SE0StartTime = x
4434 
# In  --> EOP asserted for 2 bit time at time 3220739000
4435 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4436 
# CntrlTransType = 10
4437 
# In  --> In task wait for response at time 3223878000
4438 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3224267000
4439 
# In  --> Decoder enabled at time 3224971000 in host
4440 
# In  --> receive data = 4b
4441 
# In  --> receive data = 00
4442 
# In  --> receive data = 00
4443 
# In  --> receive data = 00
4444 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  65
4445 
# ... Read Data from UART done cnt :        30...
4446 
# In  --> receive data = 63
4447 
# In  --> receive data = bf
4448 
# In  --> StopTime = x, SE0StartTime = x
4449 
# In  --> receive data = f2
4450 
# In  --> StopTime = x, SE0StartTime = x
4451 
# In  --> EOP asserted for 2 bit time at time 3229853000
4452 
# In  --> Data toggle recevied is 1001011 at time 3229937000
4453 
# In  --> received byte[1] = 00000000
4454 
# In  --> received byte[2] = 00000000
4455 
# In  --> received byte[3] = 00000000
4456 
# In  --> received byte[4] = 01100011
4457 
# In  --> calculated crc is 2b0 at time 3229937000.
4458 
# In  --> received raw crc is 2b0 at time 3229937000.
4459 
# In  --> received crc is bff2 at time 3229937000.
4460 
# In  --> tmpCrc bff2, at time 3229937000
4461 
# In  --> sending ACK at time 3231858000
4462 
# RecvBuffer[0]  = 00000000  : 0
4463 
# RecvBuffer[1]  = 00000000  : 0
4464 
# RecvBuffer[2]  = 00000000  : 0
4465 
# RecvBuffer[3]  = 01100011  : 99
4466 
# In  --> In task wait for response at time 3238410000
4467 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3238715000
4468 
# In  --> Decoder enabled at time 3239413000 in host
4469 
# In  --> StopTime = x, SE0StartTime = x
4470 
# In  --> receive data = d2
4471 
# In  --> StopTime = x, SE0StartTime = x
4472 
# In  --> EOP asserted for 2 bit time at time 3240206000
4473 
# CntrlTransType = 11
4474 
# In  --> In task wait for response at time 3252102000
4475 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3252386000
4476 
# In  --> Decoder enabled at time 3253105000 in host
4477 
# In  --> StopTime = x, SE0StartTime = x
4478 
# In  --> receive data = d2
4479 
# In  --> StopTime = x, SE0StartTime = x
4480 
# In  --> EOP asserted for 2 bit time at time 3253898000
4481 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4482 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
4483 
# In  --> DataToggle is 1
4484 
# In  --> DataToggle is 4b at time 3257142000.
4485 
# In  --> sending byte[1] = 00000000
4486 
# In  --> sending byte[2] = 00000000
4487 
# In  --> sending byte[3] = 00000000
4488 
# In  --> sending byte[4] = 01100011
4489 
# In  --> raw crc is 2b0 at time             3257142
4490 
# In  --> sent crc is bff2 at time             3257142
4491 
# In  --> In task wait for response at time 3263190000
4492 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3263474000
4493 
# In  --> Decoder enabled at time 3264210000 in host
4494 
# In  --> StopTime = x, SE0StartTime = x
4495 
# In  --> receive data = d2
4496 
# In  --> StopTime = x, SE0StartTime = x
4497 
# In  --> EOP asserted for 2 bit time at time 3265007000
4498 
# In  --> bits received are 7
4499 
# In  --> ACK received at time 3265007000.
4500 
# Input Address:01, EndPt:0
4501 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
4502 
# In  CntrlTransType = 11, WRITE = 11
4503 
# In  --> In task wait for response at time 3268230000
4504 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3268619000
4505 
# In  --> Decoder enabled at time 3269316000 in host
4506 
# In  --> receive data = 4b
4507 
# In  --> receive data = 00
4508 
# In  --> StopTime = x, SE0StartTime = x
4509 
# In  --> receive data = 00
4510 
# In  --> StopTime = x, SE0StartTime = x
4511 
# In  --> EOP asserted for 2 bit time at time 3271454000
4512 
#
4513 
# ... Reading the UART Status: 00000063 ...
4514 
# CntrlTransType = 10
4515 
# In  --> In task wait for response at time 3285282000
4516 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3285566000
4517 
# In  --> Decoder enabled at time 3286303000 in host
4518 
# In  --> StopTime = x, SE0StartTime = x
4519 
# In  --> receive data = d2
4520 
# In  --> StopTime = x, SE0StartTime = x
4521 
# In  --> EOP asserted for 2 bit time at time 3287099000
4522 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4523 
# CntrlTransType = 10
4524 
# In  --> In task wait for response at time 3290238000
4525 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3290627000
4526 
# In  --> Decoder enabled at time 3291323000 in host
4527 
# In  --> receive data = 4b
4528 
# In  --> receive data = 00
4529 
# In  --> receive data = 00
4530 
# In  --> receive data = 00
4531 
# In  --> receive data = 00
4532 
# In  --> receive data = ff
4533 
# In  --> StopTime = x, SE0StartTime = x
4534 
# In  --> receive data = db
4535 
# In  --> StopTime = x, SE0StartTime = x
4536 
# In  --> EOP asserted for 2 bit time at time 3296213000
4537 
# In  --> Data toggle recevied is 1001011 at time 3296297000
4538 
# In  --> received byte[1] = 00000000
4539 
# In  --> received byte[2] = 00000000
4540 
# In  --> received byte[3] = 00000000
4541 
# In  --> received byte[4] = 00000000
4542 
# In  --> calculated crc is 24 at time 3296297000.
4543 
# In  --> received raw crc is 24 at time 3296297000.
4544 
# In  --> received crc is ffdb at time 3296297000.
4545 
# In  --> tmpCrc ffdb, at time 3296297000
4546 
# In  --> sending ACK at time 3298218000
4547 
# RecvBuffer[0]  = 00000000  : 0
4548 
# RecvBuffer[1]  = 00000000  : 0
4549 
# RecvBuffer[2]  = 00000000  : 0
4550 
# RecvBuffer[3]  = 00000000  : 0
4551 
# In  --> In task wait for response at time 3304770000
4552 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3305075000
4553 
# In  --> Decoder enabled at time 3305786000 in host
4554 
# In  --> StopTime = x, SE0StartTime = x
4555 
# In  --> receive data = d2
4556 
# In  --> StopTime = x, SE0StartTime = x
4557 
# In  --> EOP asserted for 2 bit time at time 3306587000
4558 
# CntrlTransType = 10
4559 
# In  --> In task wait for response at time 3318462000
4560 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3318767000
4561 
# In  --> Decoder enabled at time 3319477000 in host
4562 
# In  --> StopTime = x, SE0StartTime = x
4563 
# In  --> receive data = d2
4564 
# In  --> StopTime = x, SE0StartTime = x
4565 
# In  --> EOP asserted for 2 bit time at time 3320279000
4566 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4567 
# CntrlTransType = 10
4568 
# In  --> In task wait for response at time 3323418000
4569 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3323807000
4570 
# In  --> Decoder enabled at time 3324521000 in host
4571 
# In  --> receive data = 4b
4572 
# In  --> receive data = 00
4573 
# In  --> receive data = 00
4574 
# In  --> receive data = 00
4575 
# In  --> receive data = 0a
4576 
# In  --> receive data = 7f
4577 
# In  --> StopTime = x, SE0StartTime = x
4578 
# In  --> receive data = dc
4579 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  63
4580 
# ... Read Data from UART done cnt :        31...
4581 
# In  --> StopTime = x, SE0StartTime = x
4582 
# In  --> EOP asserted for 2 bit time at time 3329414000
4583 
# In  --> Data toggle recevied is 1001011 at time 3329498000
4584 
# In  --> received byte[1] = 00000000
4585 
# In  --> received byte[2] = 00000000
4586 
# In  --> received byte[3] = 00000000
4587 
# In  --> received byte[4] = 00001010
4588 
# In  --> calculated crc is 1c4 at time 3329498000.
4589 
# In  --> received raw crc is 1c4 at time 3329498000.
4590 
# In  --> received crc is 7fdc at time 3329498000.
4591 
# In  --> tmpCrc 7fdc, at time 3329498000
4592 
# In  --> sending ACK at time 3331398000
4593 
# RecvBuffer[0]  = 00000000  : 0
4594 
# RecvBuffer[1]  = 00000000  : 0
4595 
# RecvBuffer[2]  = 00000000  : 0
4596 
# RecvBuffer[3]  = 00001010  : 10
4597 
# In  --> In task wait for response at time 3337950000
4598 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3338234000
4599 
# In  --> Decoder enabled at time 3338963000 in host
4600 
# In  --> StopTime = x, SE0StartTime = x
4601 
# In  --> receive data = d2
4602 
# In  --> StopTime = x, SE0StartTime = x
4603 
# In  --> EOP asserted for 2 bit time at time 3339767000
4604 
# CntrlTransType = 11
4605 
# In  --> In task wait for response at time 3351642000
4606 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3351947000
4607 
# In  --> Decoder enabled at time 3352655000 in host
4608 
# In  --> StopTime = x, SE0StartTime = x
4609 
# In  --> receive data = d2
4610 
# In  --> StopTime = x, SE0StartTime = x
4611 
# In  --> EOP asserted for 2 bit time at time 3353459000
4612 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4613 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
4614 
# In  --> DataToggle is 1
4615 
# In  --> DataToggle is 4b at time 3356682000.
4616 
# In  --> sending byte[1] = 00000000
4617 
# In  --> sending byte[2] = 00000000
4618 
# In  --> sending byte[3] = 00000000
4619 
# In  --> sending byte[4] = 00001010
4620 
# In  --> raw crc is 1c4 at time             3356682
4621 
# In  --> sent crc is 7fdc at time             3356682
4622 
# In  --> In task wait for response at time 3362730000
4623 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3363035000
4624 
# In  --> Decoder enabled at time 3363742000 in host
4625 
# In  --> StopTime = x, SE0StartTime = x
4626 
# In  --> receive data = d2
4627 
# In  --> StopTime = x, SE0StartTime = x
4628 
# In  --> EOP asserted for 2 bit time at time 3364547000
4629 
# In  --> bits received are 7
4630 
# In  --> ACK received at time 3364547000.
4631 
# Input Address:01, EndPt:0
4632 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
4633 
# In  CntrlTransType = 11, WRITE = 11
4634 
# In  --> In task wait for response at time 3367770000
4635 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3368159000
4636 
# In  --> Decoder enabled at time 3368871000 in host
4637 
# In  --> receive data = 4b
4638 
# In  --> receive data = 00
4639 
# In  --> StopTime = x, SE0StartTime = x
4640 
# In  --> receive data = 00
4641 
# In  --> StopTime = x, SE0StartTime = x
4642 
# In  --> EOP asserted for 2 bit time at time 3371015000
4643 
#
4644 
# ... Reading the UART Status: 0000000a ...
4645 
# CntrlTransType = 10
4646 
# In  --> In task wait for response at time 3384822000
4647 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3385127000
4648 
# In  --> Decoder enabled at time 3385835000 in host
4649 
# In  --> StopTime = x, SE0StartTime = x
4650 
# In  --> receive data = d2
4651 
# In  --> StopTime = x, SE0StartTime = x
4652 
# In  --> EOP asserted for 2 bit time at time 3386639000
4653 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4654 
# CntrlTransType = 10
4655 
# In  --> In task wait for response at time 3389778000
4656 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3390167000
4657 
# In  --> Decoder enabled at time 3390875000 in host
4658 
# In  --> receive data = 4b
4659 
# In  --> receive data = 00
4660 
# In  --> receive data = 00
4661 
# In  --> receive data = 00
4662 
# In  --> receive data = 00
4663 
# In  --> receive data = ff
4664 
# In  --> StopTime = x, SE0StartTime = x
4665 
# In  --> receive data = db
4666 
# In  --> StopTime = x, SE0StartTime = x
4667 
# In  --> EOP asserted for 2 bit time at time 3395774000
4668 
# In  --> Data toggle recevied is 1001011 at time 3395858000
4669 
# In  --> received byte[1] = 00000000
4670 
# In  --> received byte[2] = 00000000
4671 
# In  --> received byte[3] = 00000000
4672 
# In  --> received byte[4] = 00000000
4673 
# In  --> calculated crc is 24 at time 3395858000.
4674 
# In  --> received raw crc is 24 at time 3395858000.
4675 
# In  --> received crc is ffdb at time 3395858000.
4676 
# In  --> tmpCrc ffdb, at time 3395858000
4677 
# In  --> sending ACK at time 3397758000
4678 
# RecvBuffer[0]  = 00000000  : 0
4679 
# RecvBuffer[1]  = 00000000  : 0
4680 
# RecvBuffer[2]  = 00000000  : 0
4681 
# RecvBuffer[3]  = 00000000  : 0
4682 
# In  --> In task wait for response at time 3404310000
4683 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3404594000
4684 
# In  --> Decoder enabled at time 3405317000 in host
4685 
# In  --> StopTime = x, SE0StartTime = x
4686 
# In  --> receive data = d2
4687 
# In  --> StopTime = x, SE0StartTime = x
4688 
# In  --> EOP asserted for 2 bit time at time 3406106000
4689 
# CntrlTransType = 10
4690 
# In  --> In task wait for response at time 3418002000
4691 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3418286000
4692 
# In  --> Decoder enabled at time 3419009000 in host
4693 
# In  --> StopTime = x, SE0StartTime = x
4694 
# In  --> receive data = d2
4695 
# In  --> StopTime = x, SE0StartTime = x
4696 
# In  --> EOP asserted for 2 bit time at time 3419798000
4697 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4698 
# CntrlTransType = 10
4699 
# In  --> In task wait for response at time 3422958000
4700 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3423326000
4701 
# In  --> Decoder enabled at time 3424053000 in host
4702 
# In  --> receive data = 4b
4703 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  0a
4704 
# ... Read Data from UART done cnt :        32...
4705 
# In  --> receive data = 00
4706 
# In  --> receive data = 00
4707 
# In  --> receive data = 00
4708 
# In  --> receive data = 80
4709 
# In  --> receive data = fe
4710 
# In  --> StopTime = x, SE0StartTime = x
4711 
# In  --> receive data = 7b
4712 
# In  --> StopTime = x, SE0StartTime = x
4713 
# In  --> EOP asserted for 2 bit time at time 3428933000
4714 
# In  --> Data toggle recevied is 1001011 at time 3429017000
4715 
# In  --> received byte[1] = 00000000
4716 
# In  --> received byte[2] = 00000000
4717 
# In  --> received byte[3] = 00000000
4718 
# In  --> received byte[4] = 10000000
4719 
# In  --> calculated crc is 8021 at time 3429017000.
4720 
# In  --> received raw crc is 8021 at time 3429017000.
4721 
# In  --> received crc is fe7b at time 3429017000.
4722 
# In  --> tmpCrc fe7b, at time 3429017000
4723 
# In  --> sending ACK at time 3430938000
4724 
# RecvBuffer[0]  = 00000000  : 0
4725 
# RecvBuffer[1]  = 00000000  : 0
4726 
# RecvBuffer[2]  = 00000000  : 0
4727 
# RecvBuffer[3]  = 10000000  : 128
4728 
# In  --> In task wait for response at time 3437490000
4729 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3437795000
4730 
# In  --> Decoder enabled at time 3438495000 in host
4731 
# In  --> StopTime = x, SE0StartTime = x
4732 
# In  --> receive data = d2
4733 
# In  --> StopTime = x, SE0StartTime = x
4734 
# In  --> EOP asserted for 2 bit time at time 3439307000
4735 
# CntrlTransType = 11
4736 
# In  --> In task wait for response at time 3451182000
4737 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3451487000
4738 
# In  --> Decoder enabled at time 3452187000 in host
4739 
# In  --> StopTime = x, SE0StartTime = x
4740 
# In  --> receive data = d2
4741 
# In  --> StopTime = x, SE0StartTime = x
4742 
# In  --> EOP asserted for 2 bit time at time 3452999000
4743 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4744 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
4745 
# In  --> DataToggle is 1
4746 
# In  --> DataToggle is 4b at time 3456222000.
4747 
# In  --> sending byte[1] = 00000000
4748 
# In  --> sending byte[2] = 00000000
4749 
# In  --> sending byte[3] = 00000000
4750 
# In  --> sending byte[4] = 10000000
4751 
# In  --> raw crc is 8021 at time             3456222
4752 
# In  --> sent crc is fe7b at time             3456222
4753 
# In  --> In task wait for response at time 3462270000
4754 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3462575000
4755 
# In  --> Decoder enabled at time 3463273000 in host
4756 
# In  --> StopTime = x, SE0StartTime = x
4757 
# In  --> receive data = d2
4758 
# In  --> StopTime = x, SE0StartTime = x
4759 
# In  --> EOP asserted for 2 bit time at time 3464087000
4760 
# In  --> bits received are 7
4761 
# In  --> ACK received at time 3464087000.
4762 
# Input Address:01, EndPt:0
4763 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
4764 
# In  CntrlTransType = 11, WRITE = 11
4765 
# In  --> In task wait for response at time 3467310000
4766 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3467699000
4767 
# In  --> Decoder enabled at time 3468403000 in host
4768 
# In  --> receive data = 4b
4769 
# In  --> receive data = 00
4770 
# In  --> StopTime = x, SE0StartTime = x
4771 
# In  --> receive data = 00
4772 
# In  --> StopTime = x, SE0StartTime = x
4773 
# In  --> EOP asserted for 2 bit time at time 3470534000
4774 
#
4775 
# ... Reading the UART Status: 00000082 ...
4776 
# CntrlTransType = 10
4777 
# In  --> In task wait for response at time 3484362000
4778 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3484646000
4779 
# In  --> Decoder enabled at time 3485364000 in host
4780 
# In  --> StopTime = x, SE0StartTime = x
4781 
# In  --> receive data = d2
4782 
# In  --> StopTime = x, SE0StartTime = x
4783 
# In  --> EOP asserted for 2 bit time at time 3486158000
4784 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4785 
# CntrlTransType = 10
4786 
# In  --> In task wait for response at time 3489318000
4787 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3489686000
4788 
# In  --> Decoder enabled at time 3490410000 in host
4789 
# In  --> receive data = 4b
4790 
# In  --> receive data = 00
4791 
# In  --> receive data = 00
4792 
# In  --> receive data = 00
4793 
# In  --> receive data = 00
4794 
# In  --> receive data = ff
4795 
# In  --> StopTime = x, SE0StartTime = x
4796 
# In  --> receive data = db
4797 
# In  --> StopTime = x, SE0StartTime = x
4798 
# In  --> EOP asserted for 2 bit time at time 3495293000
4799 
# In  --> Data toggle recevied is 1001011 at time 3495377000
4800 
# In  --> received byte[1] = 00000000
4801 
# In  --> received byte[2] = 00000000
4802 
# In  --> received byte[3] = 00000000
4803 
# In  --> received byte[4] = 00000000
4804 
# In  --> calculated crc is 24 at time 3495377000.
4805 
# In  --> received raw crc is 24 at time 3495377000.
4806 
# In  --> received crc is ffdb at time 3495377000.
4807 
# In  --> tmpCrc ffdb, at time 3495377000
4808 
# In  --> sending ACK at time 3497298000
4809 
# RecvBuffer[0]  = 00000000  : 0
4810 
# RecvBuffer[1]  = 00000000  : 0
4811 
# RecvBuffer[2]  = 00000000  : 0
4812 
# RecvBuffer[3]  = 00000000  : 0
4813 
# In  --> In task wait for response at time 3503850000
4814 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3504155000
4815 
# In  --> Decoder enabled at time 3504873000 in host
4816 
# In  --> StopTime = x, SE0StartTime = x
4817 
# In  --> receive data = d2
4818 
# In  --> StopTime = x, SE0StartTime = x
4819 
# In  --> EOP asserted for 2 bit time at time 3505667000
4820 
# CntrlTransType = 10
4821 
# In  --> In task wait for response at time 3517542000
4822 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3517847000
4823 
# In  --> Decoder enabled at time 3518565000 in host
4824 
# In  --> StopTime = x, SE0StartTime = x
4825 
# In  --> receive data = d2
4826 
# In  --> StopTime = x, SE0StartTime = x
4827 
# In  --> EOP asserted for 2 bit time at time 3519359000
4828 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4829 
# CntrlTransType = 10
4830 
# In  --> In task wait for response at time 3522498000
4831 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3522887000
4832 
# In  --> Decoder enabled at time 3523584000 in host
4833 
# In  --> receive data = 4b
4834 
# In  --> receive data = 00
4835 
# In  --> receive data = 00
4836 
# In  --> receive data = 00
4837 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  80
4838 
# ... Read Data from UART done cnt :        33...
4839 
# In  --> receive data = 20
4840 
# In  --> receive data = fe
4841 
# In  --> StopTime = x, SE0StartTime = x
4842 
# In  --> receive data = 03
4843 
# In  --> StopTime = x, SE0StartTime = x
4844 
# In  --> EOP asserted for 2 bit time at time 3528473000
4845 
# In  --> Data toggle recevied is 1001011 at time 3528557000
4846 
# In  --> received byte[1] = 00000000
4847 
# In  --> received byte[2] = 00000000
4848 
# In  --> received byte[3] = 00000000
4849 
# In  --> received byte[4] = 00100000
4850 
# In  --> calculated crc is 803f at time 3528557000.
4851 
# In  --> received raw crc is 803f at time 3528557000.
4852 
# In  --> received crc is fe03 at time 3528557000.
4853 
# In  --> tmpCrc fe03, at time 3528557000
4854 
# In  --> sending ACK at time 3530478000
4855 
# RecvBuffer[0]  = 00000000  : 0
4856 
# RecvBuffer[1]  = 00000000  : 0
4857 
# RecvBuffer[2]  = 00000000  : 0
4858 
# RecvBuffer[3]  = 00100000  : 32
4859 
# In  --> In task wait for response at time 3537030000
4860 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3537335000
4861 
# In  --> Decoder enabled at time 3538047000 in host
4862 
# In  --> StopTime = x, SE0StartTime = x
4863 
# In  --> receive data = d2
4864 
# In  --> StopTime = x, SE0StartTime = x
4865 
# In  --> EOP asserted for 2 bit time at time 3538847000
4866 
# CntrlTransType = 11
4867 
# In  --> In task wait for response at time 3550722000
4868 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3551027000
4869 
# In  --> Decoder enabled at time 3551742000 in host
4870 
# In  --> StopTime = x, SE0StartTime = x
4871 
# In  --> receive data = d2
4872 
# In  --> StopTime = x, SE0StartTime = x
4873 
# In  --> EOP asserted for 2 bit time at time 3552539000
4874 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4875 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
4876 
# In  --> DataToggle is 1
4877 
# In  --> DataToggle is 4b at time 3555762000.
4878 
# In  --> sending byte[1] = 00000000
4879 
# In  --> sending byte[2] = 00000000
4880 
# In  --> sending byte[3] = 00000000
4881 
# In  --> sending byte[4] = 00100000
4882 
# In  --> raw crc is 803f at time             3555762
4883 
# In  --> sent crc is fe03 at time             3555762
4884 
# In  --> In task wait for response at time 3561810000
4885 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3562115000
4886 
# In  --> Decoder enabled at time 3562829000 in host
4887 
# In  --> StopTime = x, SE0StartTime = x
4888 
# In  --> receive data = d2
4889 
# In  --> StopTime = x, SE0StartTime = x
4890 
# In  --> EOP asserted for 2 bit time at time 3563627000
4891 
# In  --> bits received are 7
4892 
# In  --> ACK received at time 3563627000.
4893 
# Input Address:01, EndPt:0
4894 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
4895 
# In  CntrlTransType = 11, WRITE = 11
4896 
# In  --> In task wait for response at time 3566850000
4897 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3567239000
4898 
# In  --> Decoder enabled at time 3567953000 in host
4899 
# In  --> receive data = 4b
4900 
# In  --> receive data = 00
4901 
# In  --> StopTime = x, SE0StartTime = x
4902 
# In  --> receive data = 00
4903 
# In  --> StopTime = x, SE0StartTime = x
4904 
# In  --> EOP asserted for 2 bit time at time 3570095000
4905 
#
4906 
# ... Reading the UART Status: 00000022 ...
4907 
# CntrlTransType = 10
4908 
# In  --> In task wait for response at time 3583902000
4909 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3584207000
4910 
# In  --> Decoder enabled at time 3584917000 in host
4911 
# In  --> StopTime = x, SE0StartTime = x
4912 
# In  --> receive data = d2
4913 
# In  --> StopTime = x, SE0StartTime = x
4914 
# In  --> EOP asserted for 2 bit time at time 3585719000
4915 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4916 
# CntrlTransType = 10
4917 
# In  --> In task wait for response at time 3588858000
4918 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3589163000
4919 
# In  --> Decoder enabled at time 3589876000 in host
4920 
# In  --> receive data = 4b
4921 
# In  --> receive data = 00
4922 
# In  --> receive data = 00
4923 
# In  --> receive data = 00
4924 
# In  --> receive data = 00
4925 
# In  --> receive data = ff
4926 
# In  --> StopTime = x, SE0StartTime = x
4927 
# In  --> receive data = db
4928 
# In  --> StopTime = x, SE0StartTime = x
4929 
# In  --> EOP asserted for 2 bit time at time 3594770000
4930 
# In  --> Data toggle recevied is 1001011 at time 3594854000
4931 
# In  --> received byte[1] = 00000000
4932 
# In  --> received byte[2] = 00000000
4933 
# In  --> received byte[3] = 00000000
4934 
# In  --> received byte[4] = 00000000
4935 
# In  --> calculated crc is 24 at time 3594854000.
4936 
# In  --> received raw crc is 24 at time 3594854000.
4937 
# In  --> received crc is ffdb at time 3594854000.
4938 
# In  --> tmpCrc ffdb, at time 3594854000
4939 
# In  --> sending ACK at time 3596754000
4940 
# RecvBuffer[0]  = 00000000  : 0
4941 
# RecvBuffer[1]  = 00000000  : 0
4942 
# RecvBuffer[2]  = 00000000  : 0
4943 
# RecvBuffer[3]  = 00000000  : 0
4944 
# In  --> In task wait for response at time 3603306000
4945 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3603590000
4946 
# In  --> Decoder enabled at time 3604319000 in host
4947 
# In  --> StopTime = x, SE0StartTime = x
4948 
# In  --> receive data = d2
4949 
# In  --> StopTime = x, SE0StartTime = x
4950 
# In  --> EOP asserted for 2 bit time at time 3605123000
4951 
# CntrlTransType = 10
4952 
# In  --> In task wait for response at time 3616998000
4953 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3617303000
4954 
# In  --> Decoder enabled at time 3618010000 in host
4955 
# In  --> StopTime = x, SE0StartTime = x
4956 
# In  --> receive data = d2
4957 
# In  --> StopTime = x, SE0StartTime = x
4958 
# In  --> EOP asserted for 2 bit time at time 3618815000
4959 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
4960 
# CntrlTransType = 10
4961 
# In  --> In task wait for response at time 3621954000
4962 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3622343000
4963 
# In  --> Decoder enabled at time 3623054000 in host
4964 
# In  --> receive data = 4b
4965 
# In  --> receive data = 00
4966 
# In  --> receive data = 00
4967 
# In  --> receive data = 00
4968 
# In  --> receive data = aa
4969 
# In  --> receive data = 7f
4970 
# In  --> StopTime = x, SE0StartTime = x
4971 
# In  --> receive data = a4
4972 
# In  --> StopTime = x, SE0StartTime = x
4973 
# In  --> EOP asserted for 2 bit time at time 3627950000
4974 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  20
4975 
# ... Read Data from UART done cnt :        34...
4976 
# In  --> Data toggle recevied is 1001011 at time 3628034000
4977 
# In  --> received byte[1] = 00000000
4978 
# In  --> received byte[2] = 00000000
4979 
# In  --> received byte[3] = 00000000
4980 
# In  --> received byte[4] = 10101010
4981 
# In  --> calculated crc is 1da at time 3628034000.
4982 
# In  --> received raw crc is 1da at time 3628034000.
4983 
# In  --> received crc is 7fa4 at time 3628034000.
4984 
# In  --> tmpCrc 7fa4, at time 3628034000
4985 
# In  --> sending ACK at time 3629934000
4986 
# RecvBuffer[0]  = 00000000  : 0
4987 
# RecvBuffer[1]  = 00000000  : 0
4988 
# RecvBuffer[2]  = 00000000  : 0
4989 
# RecvBuffer[3]  = 10101010  : 170
4990 
# In  --> In task wait for response at time 3636486000
4991 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3636770000
4992 
# In  --> Decoder enabled at time 3637496000 in host
4993 
# In  --> StopTime = x, SE0StartTime = x
4994 
# In  --> receive data = d2
4995 
# In  --> StopTime = x, SE0StartTime = x
4996 
# In  --> EOP asserted for 2 bit time at time 3638282000
4997 
# CntrlTransType = 11
4998 
# In  --> In task wait for response at time 3650178000
4999 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3650462000
5000 
# In  --> Decoder enabled at time 3651188000 in host
5001 
# In  --> StopTime = x, SE0StartTime = x
5002 
# In  --> receive data = d2
5003 
# In  --> StopTime = x, SE0StartTime = x
5004 
# In  --> EOP asserted for 2 bit time at time 3651974000
5005 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5006 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
5007 
# In  --> DataToggle is 1
5008 
# In  --> DataToggle is 4b at time 3655218000.
5009 
# In  --> sending byte[1] = 00000000
5010 
# In  --> sending byte[2] = 00000000
5011 
# In  --> sending byte[3] = 00000000
5012 
# In  --> sending byte[4] = 10101010
5013 
# In  --> raw crc is 1da at time             3655218
5014 
# In  --> sent crc is 7fa4 at time             3655218
5015 
# In  --> In task wait for response at time 3661266000
5016 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3661550000
5017 
# In  --> Decoder enabled at time 3662275000 in host
5018 
# In  --> StopTime = x, SE0StartTime = x
5019 
# In  --> receive data = d2
5020 
# In  --> StopTime = x, SE0StartTime = x
5021 
# In  --> EOP asserted for 2 bit time at time 3663062000
5022 
# In  --> bits received are 7
5023 
# In  --> ACK received at time 3663062000.
5024 
# Input Address:01, EndPt:0
5025 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
5026 
# In  CntrlTransType = 11, WRITE = 11
5027 
# In  --> In task wait for response at time 3666306000
5028 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3666674000
5029 
# In  --> Decoder enabled at time 3667404000 in host
5030 
# In  --> receive data = 4b
5031 
# In  --> receive data = 00
5032 
# In  --> StopTime = x, SE0StartTime = x
5033 
# In  --> receive data = 00
5034 
# In  --> StopTime = x, SE0StartTime = x
5035 
# In  --> EOP asserted for 2 bit time at time 3669530000
5036 
#
5037 
# ... Reading the UART Status: 000000aa ...
5038 
# CntrlTransType = 10
5039 
# In  --> In task wait for response at time 3683358000
5040 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3683642000
5041 
# In  --> Decoder enabled at time 3684368000 in host
5042 
# In  --> StopTime = x, SE0StartTime = x
5043 
# In  --> receive data = d2
5044 
# In  --> StopTime = x, SE0StartTime = x
5045 
# In  --> EOP asserted for 2 bit time at time 3685154000
5046 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5047 
# CntrlTransType = 10
5048 
# In  --> In task wait for response at time 3688314000
5049 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3688682000
5050 
# In  --> Decoder enabled at time 3689408000 in host
5051 
# In  --> receive data = 4b
5052 
# In  --> receive data = 00
5053 
# In  --> receive data = 00
5054 
# In  --> receive data = 00
5055 
# In  --> receive data = 00
5056 
# In  --> receive data = ff
5057 
# In  --> StopTime = x, SE0StartTime = x
5058 
# In  --> receive data = db
5059 
# In  --> StopTime = x, SE0StartTime = x
5060 
# In  --> EOP asserted for 2 bit time at time 3694289000
5061 
# In  --> Data toggle recevied is 1001011 at time 3694373000
5062 
# In  --> received byte[1] = 00000000
5063 
# In  --> received byte[2] = 00000000
5064 
# In  --> received byte[3] = 00000000
5065 
# In  --> received byte[4] = 00000000
5066 
# In  --> calculated crc is 24 at time 3694373000.
5067 
# In  --> received raw crc is 24 at time 3694373000.
5068 
# In  --> received crc is ffdb at time 3694373000.
5069 
# In  --> tmpCrc ffdb, at time 3694373000
5070 
# In  --> sending ACK at time 3696294000
5071 
# RecvBuffer[0]  = 00000000  : 0
5072 
# RecvBuffer[1]  = 00000000  : 0
5073 
# RecvBuffer[2]  = 00000000  : 0
5074 
# RecvBuffer[3]  = 00000000  : 0
5075 
# In  --> In task wait for response at time 3702846000
5076 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3703151000
5077 
# In  --> Decoder enabled at time 3703850000 in host
5078 
# In  --> StopTime = x, SE0StartTime = x
5079 
# In  --> receive data = d2
5080 
# In  --> StopTime = x, SE0StartTime = x
5081 
# In  --> EOP asserted for 2 bit time at time 3704663000
5082 
# CntrlTransType = 10
5083 
# In  --> In task wait for response at time 3716538000
5084 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3716843000
5085 
# In  --> Decoder enabled at time 3717542000 in host
5086 
# In  --> StopTime = x, SE0StartTime = x
5087 
# In  --> receive data = d2
5088 
# In  --> StopTime = x, SE0StartTime = x
5089 
# In  --> EOP asserted for 2 bit time at time 3718355000
5090 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5091 
# CntrlTransType = 10
5092 
# In  --> In task wait for response at time 3721494000
5093 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3721883000
5094 
# In  --> Decoder enabled at time 3722586000 in host
5095 
# In  --> receive data = 4b
5096 
# In  --> receive data = 00
5097 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  aa
5098 
# ... Read Data from UART done cnt :        35...
5099 
# In  --> receive data = 00
5100 
# In  --> receive data = 00
5101 
# In  --> receive data = 9d
5102 
# In  --> receive data = 3e
5103 
# In  --> StopTime = x, SE0StartTime = x
5104 
# In  --> receive data = 72
5105 
# In  --> StopTime = x, SE0StartTime = x
5106 
# In  --> EOP asserted for 2 bit time at time 3727385000
5107 
# In  --> Data toggle recevied is 1001011 at time 3727469000
5108 
# In  --> received byte[1] = 00000000
5109 
# In  --> received byte[2] = 00000000
5110 
# In  --> received byte[3] = 00000000
5111 
# In  --> received byte[4] = 10011101
5112 
# In  --> calculated crc is 83b1 at time 3727469000.
5113 
# In  --> received raw crc is 83b1 at time 3727469000.
5114 
# In  --> received crc is 3e72 at time 3727469000.
5115 
# In  --> tmpCrc 3e72, at time 3727469000
5116 
# In  --> sending ACK at time 3729390000
5117 
# RecvBuffer[0]  = 00000000  : 0
5118 
# RecvBuffer[1]  = 00000000  : 0
5119 
# RecvBuffer[2]  = 00000000  : 0
5120 
# RecvBuffer[3]  = 10011101  : 157
5121 
# In  --> In task wait for response at time 3735942000
5122 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3736247000
5123 
# In  --> Decoder enabled at time 3736944000 in host
5124 
# In  --> StopTime = x, SE0StartTime = x
5125 
# In  --> receive data = d2
5126 
# In  --> StopTime = x, SE0StartTime = x
5127 
# In  --> EOP asserted for 2 bit time at time 3737738000
5128 
# CntrlTransType = 11
5129 
# In  --> In task wait for response at time 3749634000
5130 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3749918000
5131 
# In  --> Decoder enabled at time 3750639000 in host
5132 
# In  --> StopTime = x, SE0StartTime = x
5133 
# In  --> receive data = d2
5134 
# In  --> StopTime = x, SE0StartTime = x
5135 
# In  --> EOP asserted for 2 bit time at time 3751430000
5136 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5137 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
5138 
# In  --> DataToggle is 1
5139 
# In  --> DataToggle is 4b at time 3754674000.
5140 
# In  --> sending byte[1] = 00000000
5141 
# In  --> sending byte[2] = 00000000
5142 
# In  --> sending byte[3] = 00000000
5143 
# In  --> sending byte[4] = 10011101
5144 
# In  --> raw crc is 83b1 at time             3754674
5145 
# In  --> sent crc is 3e72 at time             3754674
5146 
# In  --> In task wait for response at time 3760638000
5147 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3760922000
5148 
# In  --> Decoder enabled at time 3761640000 in host
5149 
# In  --> StopTime = x, SE0StartTime = x
5150 
# In  --> receive data = d2
5151 
# In  --> StopTime = x, SE0StartTime = x
5152 
# In  --> EOP asserted for 2 bit time at time 3762434000
5153 
# In  --> bits received are 7
5154 
# In  --> ACK received at time 3762434000.
5155 
# Input Address:01, EndPt:0
5156 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
5157 
# In  CntrlTransType = 11, WRITE = 11
5158 
# In  --> In task wait for response at time 3765678000
5159 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3766046000
5160 
# In  --> Decoder enabled at time 3766766000 in host
5161 
# In  --> receive data = 4b
5162 
# In  --> receive data = 00
5163 
# In  --> StopTime = x, SE0StartTime = x
5164 
# In  --> receive data = 00
5165 
# In  --> StopTime = x, SE0StartTime = x
5166 
# In  --> EOP asserted for 2 bit time at time 3768902000
5167 
#
5168 
# ... Reading the UART Status: 0000009f ...
5169 
# CntrlTransType = 10
5170 
# In  --> In task wait for response at time 3782730000
5171 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3783014000
5172 
# In  --> Decoder enabled at time 3783733000 in host
5173 
# In  --> StopTime = x, SE0StartTime = x
5174 
# In  --> receive data = d2
5175 
# In  --> StopTime = x, SE0StartTime = x
5176 
# In  --> EOP asserted for 2 bit time at time 3784526000
5177 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5178 
# CntrlTransType = 10
5179 
# In  --> In task wait for response at time 3787686000
5180 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3788054000
5181 
# In  --> Decoder enabled at time 3788773000 in host
5182 
# In  --> receive data = 4b
5183 
# In  --> receive data = 00
5184 
# In  --> receive data = 00
5185 
# In  --> receive data = 00
5186 
# In  --> receive data = 00
5187 
# In  --> receive data = ff
5188 
# In  --> StopTime = x, SE0StartTime = x
5189 
# In  --> receive data = db
5190 
# In  --> StopTime = x, SE0StartTime = x
5191 
# In  --> EOP asserted for 2 bit time at time 3793661000
5192 
# In  --> Data toggle recevied is 1001011 at time 3793745000
5193 
# In  --> received byte[1] = 00000000
5194 
# In  --> received byte[2] = 00000000
5195 
# In  --> received byte[3] = 00000000
5196 
# In  --> received byte[4] = 00000000
5197 
# In  --> calculated crc is 24 at time 3793745000.
5198 
# In  --> received raw crc is 24 at time 3793745000.
5199 
# In  --> received crc is ffdb at time 3793745000.
5200 
# In  --> tmpCrc ffdb, at time 3793745000
5201 
# In  --> sending ACK at time 3795666000
5202 
# RecvBuffer[0]  = 00000000  : 0
5203 
# RecvBuffer[1]  = 00000000  : 0
5204 
# RecvBuffer[2]  = 00000000  : 0
5205 
# RecvBuffer[3]  = 00000000  : 0
5206 
# In  --> In task wait for response at time 3802218000
5207 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3802523000
5208 
# In  --> Decoder enabled at time 3803236000 in host
5209 
# In  --> StopTime = x, SE0StartTime = x
5210 
# In  --> receive data = d2
5211 
# In  --> StopTime = x, SE0StartTime = x
5212 
# In  --> EOP asserted for 2 bit time at time 3804035000
5213 
# CntrlTransType = 10
5214 
# In  --> In task wait for response at time 3815910000
5215 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3816215000
5216 
# In  --> Decoder enabled at time 3816931000 in host
5217 
# In  --> StopTime = x, SE0StartTime = x
5218 
# In  --> receive data = d2
5219 
# In  --> StopTime = x, SE0StartTime = x
5220 
# In  --> EOP asserted for 2 bit time at time 3817727000
5221 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5222 
# CntrlTransType = 10
5223 
# In  --> In task wait for response at time 3820866000
5224 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3821255000
5225 
# In  --> Decoder enabled at time 3821951000 in host
5226 
# In  --> receive data = 4b
5227 
# In  --> receive data = 00
5228 
# In  --> receive data = 00
5229 
# In  --> receive data = 00
5230 
# In  --> receive data = 96
5231 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  9d
5232 
# ... Read Data from UART done cnt :        36...
5233 
# In  --> receive data = 7f
5234 
# In  --> StopTime = x, SE0StartTime = x
5235 
# In  --> receive data = b5
5236 
# In  --> StopTime = x, SE0StartTime = x
5237 
# In  --> EOP asserted for 2 bit time at time 3826841000
5238 
# In  --> Data toggle recevied is 1001011 at time 3826925000
5239 
# In  --> received byte[1] = 00000000
5240 
# In  --> received byte[2] = 00000000
5241 
# In  --> received byte[3] = 00000000
5242 
# In  --> received byte[4] = 10010110
5243 
# In  --> calculated crc is 152 at time 3826925000.
5244 
# In  --> received raw crc is 152 at time 3826925000.
5245 
# In  --> received crc is 7fb5 at time 3826925000.
5246 
# In  --> tmpCrc 7fb5, at time 3826925000
5247 
# In  --> sending ACK at time 3828846000
5248 
# RecvBuffer[0]  = 00000000  : 0
5249 
# RecvBuffer[1]  = 00000000  : 0
5250 
# RecvBuffer[2]  = 00000000  : 0
5251 
# RecvBuffer[3]  = 10010110  : 150
5252 
# In  --> In task wait for response at time 3835398000
5253 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3835703000
5254 
# In  --> Decoder enabled at time 3836414000 in host
5255 
# In  --> StopTime = x, SE0StartTime = x
5256 
# In  --> receive data = d2
5257 
# In  --> StopTime = x, SE0StartTime = x
5258 
# In  --> EOP asserted for 2 bit time at time 3837215000
5259 
# CntrlTransType = 11
5260 
# In  --> In task wait for response at time 3849090000
5261 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3849395000
5262 
# In  --> Decoder enabled at time 3850106000 in host
5263 
# In  --> StopTime = x, SE0StartTime = x
5264 
# In  --> receive data = d2
5265 
# In  --> StopTime = x, SE0StartTime = x
5266 
# In  --> EOP asserted for 2 bit time at time 3850907000
5267 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5268 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
5269 
# In  --> DataToggle is 1
5270 
# In  --> DataToggle is 4b at time 3854130000.
5271 
# In  --> sending byte[1] = 00000000
5272 
# In  --> sending byte[2] = 00000000
5273 
# In  --> sending byte[3] = 00000000
5274 
# In  --> sending byte[4] = 10010110
5275 
# In  --> raw crc is 152 at time             3854130
5276 
# In  --> sent crc is 7fb5 at time             3854130
5277 
# In  --> In task wait for response at time 3860178000
5278 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3860483000
5279 
# In  --> Decoder enabled at time 3861192000 in host
5280 
# In  --> StopTime = x, SE0StartTime = x
5281 
# In  --> receive data = d2
5282 
# In  --> StopTime = x, SE0StartTime = x
5283 
# In  --> EOP asserted for 2 bit time at time 3861995000
5284 
# In  --> bits received are 7
5285 
# In  --> ACK received at time 3861995000.
5286 
# Input Address:01, EndPt:0
5287 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
5288 
# In  CntrlTransType = 11, WRITE = 11
5289 
# In  --> In task wait for response at time 3865218000
5290 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3865523000
5291 
# In  --> Decoder enabled at time 3866236000 in host
5292 
# In  --> receive data = 4b
5293 
# In  --> receive data = 00
5294 
# In  --> StopTime = x, SE0StartTime = x
5295 
# In  --> receive data = 00
5296 
# In  --> StopTime = x, SE0StartTime = x
5297 
# In  --> EOP asserted for 2 bit time at time 3868379000
5298 
#
5299 
# ... Reading the UART Status: 00000096 ...
5300 
# CntrlTransType = 10
5301 
# In  --> In task wait for response at time 3882186000
5302 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3882491000
5303 
# In  --> Decoder enabled at time 3883199000 in host
5304 
# In  --> StopTime = x, SE0StartTime = x
5305 
# In  --> receive data = d2
5306 
# In  --> StopTime = x, SE0StartTime = x
5307 
# In  --> EOP asserted for 2 bit time at time 3884003000
5308 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5309 
# CntrlTransType = 10
5310 
# In  --> In task wait for response at time 3887142000
5311 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3887447000
5312 
# In  --> Decoder enabled at time 3888159000 in host
5313 
# In  --> receive data = 4b
5314 
# In  --> receive data = 00
5315 
# In  --> receive data = 00
5316 
# In  --> receive data = 00
5317 
# In  --> receive data = 00
5318 
# In  --> receive data = ff
5319 
# In  --> StopTime = x, SE0StartTime = x
5320 
# In  --> receive data = db
5321 
# In  --> StopTime = x, SE0StartTime = x
5322 
# In  --> EOP asserted for 2 bit time at time 3893054000
5323 
# In  --> Data toggle recevied is 1001011 at time 3893138000
5324 
# In  --> received byte[1] = 00000000
5325 
# In  --> received byte[2] = 00000000
5326 
# In  --> received byte[3] = 00000000
5327 
# In  --> received byte[4] = 00000000
5328 
# In  --> calculated crc is 24 at time 3893138000.
5329 
# In  --> received raw crc is 24 at time 3893138000.
5330 
# In  --> received crc is ffdb at time 3893138000.
5331 
# In  --> tmpCrc ffdb, at time 3893138000
5332 
# In  --> sending ACK at time 3895038000
5333 
# RecvBuffer[0]  = 00000000  : 0
5334 
# RecvBuffer[1]  = 00000000  : 0
5335 
# RecvBuffer[2]  = 00000000  : 0
5336 
# RecvBuffer[3]  = 00000000  : 0
5337 
# In  --> In task wait for response at time 3901590000
5338 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3901874000
5339 
# In  --> Decoder enabled at time 3902602000 in host
5340 
# In  --> StopTime = x, SE0StartTime = x
5341 
# In  --> receive data = d2
5342 
# In  --> StopTime = x, SE0StartTime = x
5343 
# In  --> EOP asserted for 2 bit time at time 3903386000
5344 
# CntrlTransType = 10
5345 
# In  --> In task wait for response at time 3915282000
5346 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3915566000
5347 
# In  --> Decoder enabled at time 3916293000 in host
5348 
# In  --> StopTime = x, SE0StartTime = x
5349 
# In  --> receive data = d2
5350 
# In  --> StopTime = x, SE0StartTime = x
5351 
# In  --> EOP asserted for 2 bit time at time 3917078000
5352 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5353 
# CntrlTransType = 10
5354 
# In  --> In task wait for response at time 3920238000
5355 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3920606000
5356 
# In  --> Decoder enabled at time 3921337000 in host
5357 
# In  --> receive data = 4b
5358 
# In  --> receive data = 00
5359 
# In  --> receive data = 00
5360 
# In  --> receive data = 00
5361 
# In  --> receive data = 13
5362 
# In  --> receive data = be
5363 
# In  --> StopTime = x, SE0StartTime = x
5364 
# In  --> receive data = 16
5365 
# In  --> StopTime = x, SE0StartTime = x
5366 
# In  --> EOP asserted for 2 bit time at time 3926150000
5367 
# In  --> Data toggle recevied is 1001011 at time 3926234000
5368 
# In  --> received byte[1] = 00000000
5369 
# In  --> received byte[2] = 00000000
5370 
# In  --> received byte[3] = 00000000
5371 
# In  --> received byte[4] = 00010011
5372 
# In  --> calculated crc is 8297 at time 3926234000.
5373 
# In  --> received raw crc is 8297 at time 3926234000.
5374 
# In  --> received crc is be16 at time 3926234000.
5375 
# In  --> tmpCrc be16, at time 3926234000
5376 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  96
5377 
# ... Read Data from UART done cnt :        37...
5378 
# In  --> sending ACK at time 3928134000
5379 
# RecvBuffer[0]  = 00000000  : 0
5380 
# RecvBuffer[1]  = 00000000  : 0
5381 
# RecvBuffer[2]  = 00000000  : 0
5382 
# RecvBuffer[3]  = 00010011  : 19
5383 
# In  --> In task wait for response at time 3934686000
5384 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3934970000
5385 
# In  --> Decoder enabled at time 3935695000 in host
5386 
# In  --> StopTime = x, SE0StartTime = x
5387 
# In  --> receive data = d2
5388 
# In  --> StopTime = x, SE0StartTime = x
5389 
# In  --> EOP asserted for 2 bit time at time 3936482000
5390 
# CntrlTransType = 11
5391 
# In  --> In task wait for response at time 3948378000
5392 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3948662000
5393 
# In  --> Decoder enabled at time 3949387000 in host
5394 
# In  --> StopTime = x, SE0StartTime = x
5395 
# In  --> receive data = d2
5396 
# In  --> StopTime = x, SE0StartTime = x
5397 
# In  --> EOP asserted for 2 bit time at time 3950174000
5398 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5399 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
5400 
# In  --> DataToggle is 1
5401 
# In  --> DataToggle is 4b at time 3953418000.
5402 
# In  --> sending byte[1] = 00000000
5403 
# In  --> sending byte[2] = 00000000
5404 
# In  --> sending byte[3] = 00000000
5405 
# In  --> sending byte[4] = 00010011
5406 
# In  --> raw crc is 8297 at time             3953418
5407 
# In  --> sent crc is be16 at time             3953418
5408 
# In  --> In task wait for response at time 3959382000
5409 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3959666000
5410 
# In  --> Decoder enabled at time 3960391000 in host
5411 
# In  --> StopTime = x, SE0StartTime = x
5412 
# In  --> receive data = d2
5413 
# In  --> StopTime = x, SE0StartTime = x
5414 
# In  --> EOP asserted for 2 bit time at time 3961178000
5415 
# In  --> bits received are 7
5416 
# In  --> ACK received at time 3961178000.
5417 
# Input Address:01, EndPt:0
5418 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
5419 
# In  CntrlTransType = 11, WRITE = 11
5420 
# In  --> In task wait for response at time 3964422000
5421 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3964790000
5422 
# In  --> Decoder enabled at time 3965517000 in host
5423 
# In  --> receive data = 4b
5424 
# In  --> receive data = 00
5425 
# In  --> StopTime = x, SE0StartTime = x
5426 
# In  --> receive data = 00
5427 
# In  --> StopTime = x, SE0StartTime = x
5428 
# In  --> EOP asserted for 2 bit time at time 3967646000
5429 
#
5430 
# ... Reading the UART Status: 00000013 ...
5431 
# CntrlTransType = 10
5432 
# In  --> In task wait for response at time 3981474000
5433 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3981758000
5434 
# In  --> Decoder enabled at time 3982484000 in host
5435 
# In  --> StopTime = x, SE0StartTime = x
5436 
# In  --> receive data = d2
5437 
# In  --> StopTime = x, SE0StartTime = x
5438 
# In  --> EOP asserted for 2 bit time at time 3983270000
5439 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5440 
# CntrlTransType = 10
5441 
# In  --> In task wait for response at time 3986430000
5442 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 3986798000
5443 
# In  --> Decoder enabled at time 3987525000 in host
5444 
# In  --> receive data = 4b
5445 
# In  --> receive data = 00
5446 
# In  --> receive data = 00
5447 
# In  --> receive data = 00
5448 
# In  --> receive data = 00
5449 
# In  --> receive data = ff
5450 
# In  --> StopTime = x, SE0StartTime = x
5451 
# In  --> receive data = db
5452 
# In  --> StopTime = x, SE0StartTime = x
5453 
# In  --> EOP asserted for 2 bit time at time 3992405000
5454 
# In  --> Data toggle recevied is 1001011 at time 3992489000
5455 
# In  --> received byte[1] = 00000000
5456 
# In  --> received byte[2] = 00000000
5457 
# In  --> received byte[3] = 00000000
5458 
# In  --> received byte[4] = 00000000
5459 
# In  --> calculated crc is 24 at time 3992489000.
5460 
# In  --> received raw crc is 24 at time 3992489000.
5461 
# In  --> received crc is ffdb at time 3992489000.
5462 
# In  --> tmpCrc ffdb, at time 3992489000
5463 
# In  --> sending ACK at time 3994410000
5464 
# RecvBuffer[0]  = 00000000  : 0
5465 
# RecvBuffer[1]  = 00000000  : 0
5466 
# RecvBuffer[2]  = 00000000  : 0
5467 
# RecvBuffer[3]  = 00000000  : 0
5468 
# In  --> In task wait for response at time 4000962000
5469 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4001267000
5470 
# In  --> Decoder enabled at time 4001967000 in host
5471 
# In  --> StopTime = x, SE0StartTime = x
5472 
# In  --> receive data = d2
5473 
# In  --> StopTime = x, SE0StartTime = x
5474 
# In  --> EOP asserted for 2 bit time at time 4002779000
5475 
# CntrlTransType = 10
5476 
# In  --> In task wait for response at time 4014654000
5477 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4014959000
5478 
# In  --> Decoder enabled at time 4015659000 in host
5479 
# In  --> StopTime = x, SE0StartTime = x
5480 
# In  --> receive data = d2
5481 
# In  --> StopTime = x, SE0StartTime = x
5482 
# In  --> EOP asserted for 2 bit time at time 4016471000
5483 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5484 
# CntrlTransType = 10
5485 
# In  --> In task wait for response at time 4019610000
5486 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4019999000
5487 
# In  --> Decoder enabled at time 4020702000 in host
5488 
# In  --> receive data = 4b
5489 
# In  --> receive data = 00
5490 
# In  --> receive data = 00
5491 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  13
5492 
# ... Read Data from UART done cnt :        38...
5493 
# In  --> receive data = 00
5494 
# In  --> receive data = 0d
5495 
# In  --> receive data = 3e
5496 
# In  --> StopTime = x, SE0StartTime = x
5497 
# In  --> receive data = 1e
5498 
# In  --> StopTime = x, SE0StartTime = x
5499 
# In  --> EOP asserted for 2 bit time at time 4025501000
5500 
# In  --> Data toggle recevied is 1001011 at time 4025585000
5501 
# In  --> received byte[1] = 00000000
5502 
# In  --> received byte[2] = 00000000
5503 
# In  --> received byte[3] = 00000000
5504 
# In  --> received byte[4] = 00001101
5505 
# In  --> calculated crc is 8387 at time 4025585000.
5506 
# In  --> received raw crc is 8387 at time 4025585000.
5507 
# In  --> received crc is 3e1e at time 4025585000.
5508 
# In  --> tmpCrc 3e1e, at time 4025585000
5509 
# In  --> sending ACK at time 4027506000
5510 
# RecvBuffer[0]  = 00000000  : 0
5511 
# RecvBuffer[1]  = 00000000  : 0
5512 
# RecvBuffer[2]  = 00000000  : 0
5513 
# RecvBuffer[3]  = 00001101  : 13
5514 
# In  --> In task wait for response at time 4034058000
5515 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4034363000
5516 
# In  --> Decoder enabled at time 4035061000 in host
5517 
# In  --> StopTime = x, SE0StartTime = x
5518 
# In  --> receive data = d2
5519 
# In  --> StopTime = x, SE0StartTime = x
5520 
# In  --> EOP asserted for 2 bit time at time 4035854000
5521 
# CntrlTransType = 11
5522 
# In  --> In task wait for response at time 4047750000
5523 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4048034000
5524 
# In  --> Decoder enabled at time 4048752000 in host
5525 
# In  --> StopTime = x, SE0StartTime = x
5526 
# In  --> receive data = d2
5527 
# In  --> StopTime = x, SE0StartTime = x
5528 
# In  --> EOP asserted for 2 bit time at time 4049546000
5529 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5530 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
5531 
# In  --> DataToggle is 1
5532 
# In  --> DataToggle is 4b at time 4052790000.
5533 
# In  --> sending byte[1] = 00000000
5534 
# In  --> sending byte[2] = 00000000
5535 
# In  --> sending byte[3] = 00000000
5536 
# In  --> sending byte[4] = 00001101
5537 
# In  --> raw crc is 8387 at time             4052790
5538 
# In  --> sent crc is 3e1e at time             4052790
5539 
# In  --> In task wait for response at time 4058754000
5540 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4059038000
5541 
# In  --> Decoder enabled at time 4059759000 in host
5542 
# In  --> StopTime = x, SE0StartTime = x
5543 
# In  --> receive data = d2
5544 
# In  --> StopTime = x, SE0StartTime = x
5545 
# In  --> EOP asserted for 2 bit time at time 4060550000
5546 
# In  --> bits received are 7
5547 
# In  --> ACK received at time 4060550000.
5548 
# Input Address:01, EndPt:0
5549 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
5550 
# In  CntrlTransType = 11, WRITE = 11
5551 
# In  --> In task wait for response at time 4063794000
5552 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4064162000
5553 
# In  --> Decoder enabled at time 4064883000 in host
5554 
# In  --> receive data = 4b
5555 
# In  --> receive data = 00
5556 
# In  --> StopTime = x, SE0StartTime = x
5557 
# In  --> receive data = 00
5558 
# In  --> StopTime = x, SE0StartTime = x
5559 
# In  --> EOP asserted for 2 bit time at time 4067018000
5560 
#
5561 
# ... Reading the UART Status: 0000000f ...
5562 
# CntrlTransType = 10
5563 
# In  --> In task wait for response at time 4080846000
5564 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4081130000
5565 
# In  --> Decoder enabled at time 4081846000 in host
5566 
# In  --> StopTime = x, SE0StartTime = x
5567 
# In  --> receive data = d2
5568 
# In  --> StopTime = x, SE0StartTime = x
5569 
# In  --> EOP asserted for 2 bit time at time 4082642000
5570 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5571 
# CntrlTransType = 10
5572 
# In  --> In task wait for response at time 4085802000
5573 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4086170000
5574 
# In  --> Decoder enabled at time 4086890000 in host
5575 
# In  --> receive data = 4b
5576 
# In  --> receive data = 00
5577 
# In  --> receive data = 00
5578 
# In  --> receive data = 00
5579 
# In  --> receive data = 00
5580 
# In  --> receive data = ff
5581 
# In  --> StopTime = x, SE0StartTime = x
5582 
# In  --> receive data = db
5583 
# In  --> StopTime = x, SE0StartTime = x
5584 
# In  --> EOP asserted for 2 bit time at time 4091777000
5585 
# In  --> Data toggle recevied is 1001011 at time 4091861000
5586 
# In  --> received byte[1] = 00000000
5587 
# In  --> received byte[2] = 00000000
5588 
# In  --> received byte[3] = 00000000
5589 
# In  --> received byte[4] = 00000000
5590 
# In  --> calculated crc is 24 at time 4091861000.
5591 
# In  --> received raw crc is 24 at time 4091861000.
5592 
# In  --> received crc is ffdb at time 4091861000.
5593 
# In  --> tmpCrc ffdb, at time 4091861000
5594 
# In  --> sending ACK at time 4093782000
5595 
# RecvBuffer[0]  = 00000000  : 0
5596 
# RecvBuffer[1]  = 00000000  : 0
5597 
# RecvBuffer[2]  = 00000000  : 0
5598 
# RecvBuffer[3]  = 00000000  : 0
5599 
# In  --> In task wait for response at time 4100334000
5600 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4100639000
5601 
# In  --> Decoder enabled at time 4101353000 in host
5602 
# In  --> StopTime = x, SE0StartTime = x
5603 
# In  --> receive data = d2
5604 
# In  --> StopTime = x, SE0StartTime = x
5605 
# In  --> EOP asserted for 2 bit time at time 4102151000
5606 
# CntrlTransType = 10
5607 
# In  --> In task wait for response at time 4114026000
5608 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4114331000
5609 
# In  --> Decoder enabled at time 4115044000 in host
5610 
# In  --> StopTime = x, SE0StartTime = x
5611 
# In  --> receive data = d2
5612 
# In  --> StopTime = x, SE0StartTime = x
5613 
# In  --> EOP asserted for 2 bit time at time 4115843000
5614 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5615 
# CntrlTransType = 10
5616 
# In  --> In task wait for response at time 4118982000
5617 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4119371000
5618 
# In  --> Decoder enabled at time 4120067000 in host
5619 
# In  --> receive data = 4b
5620 
# In  --> receive data = 00
5621 
# In  --> receive data = 00
5622 
# In  --> receive data = 00
5623 
# In  --> receive data = 53
5624 
# In  --> receive data = bf
5625 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  0d
5626 
# ... Read Data from UART done cnt :        39...
5627 
# In  --> StopTime = x, SE0StartTime = x
5628 
# In  --> receive data = e6
5629 
# In  --> StopTime = x, SE0StartTime = x
5630 
# In  --> EOP asserted for 2 bit time at time 4124957000
5631 
# In  --> Data toggle recevied is 1001011 at time 4125041000
5632 
# In  --> received byte[1] = 00000000
5633 
# In  --> received byte[2] = 00000000
5634 
# In  --> received byte[3] = 00000000
5635 
# In  --> received byte[4] = 01010011
5636 
# In  --> calculated crc is 298 at time 4125041000.
5637 
# In  --> received raw crc is 298 at time 4125041000.
5638 
# In  --> received crc is bfe6 at time 4125041000.
5639 
# In  --> tmpCrc bfe6, at time 4125041000
5640 
# In  --> sending ACK at time 4126962000
5641 
# RecvBuffer[0]  = 00000000  : 0
5642 
# RecvBuffer[1]  = 00000000  : 0
5643 
# RecvBuffer[2]  = 00000000  : 0
5644 
# RecvBuffer[3]  = 01010011  : 83
5645 
# In  --> In task wait for response at time 4133514000
5646 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4133819000
5647 
# In  --> Decoder enabled at time 4134530000 in host
5648 
# In  --> StopTime = x, SE0StartTime = x
5649 
# In  --> receive data = d2
5650 
# In  --> StopTime = x, SE0StartTime = x
5651 
# In  --> EOP asserted for 2 bit time at time 4135331000
5652 
# CntrlTransType = 11
5653 
# In  --> In task wait for response at time 4147206000
5654 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4147511000
5655 
# In  --> Decoder enabled at time 4148222000 in host
5656 
# In  --> StopTime = x, SE0StartTime = x
5657 
# In  --> receive data = d2
5658 
# In  --> StopTime = x, SE0StartTime = x
5659 
# In  --> EOP asserted for 2 bit time at time 4149023000
5660 
# In  --> in_out_buf[0] = 11010010, in_out_buf_ptr =    1
5661 
# In  host --> address = 01, EndPt = 0, crc5 = 1d, tmpReg = e801
5662 
# In  --> DataToggle is 1
5663 
# In  --> DataToggle is 4b at time 4152246000.
5664 
# In  --> sending byte[1] = 00000000
5665 
# In  --> sending byte[2] = 00000000
5666 
# In  --> sending byte[3] = 00000000
5667 
# In  --> sending byte[4] = 01010011
5668 
# In  --> raw crc is 298 at time             4152246
5669 
# In  --> sent crc is bfe6 at time             4152246
5670 
# In  --> In task wait for response at time 4158294000
5671 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4158599000
5672 
# In  --> Decoder enabled at time 4159309000 in host
5673 
# In  --> StopTime = x, SE0StartTime = x
5674 
# In  --> receive data = d2
5675 
# In  --> StopTime = x, SE0StartTime = x
5676 
# In  --> EOP asserted for 2 bit time at time 4160111000
5677 
# In  --> bits received are 7
5678 
# In  --> ACK received at time 4160111000.
5679 
# Input Address:01, EndPt:0
5680 
# i :          1, CntrlTransType:3; CntrlTransAddr:01;CntrlTransEndP:0
5681 
# In  CntrlTransType = 11, WRITE = 11
5682 
# In  --> In task wait for response at time 4163334000
5683 
# In  --> DPLS = 0 , DeviceSpeed = 1 at time 4163639000
5684 
# In  --> Decoder enabled at time 4164352000 in host
5685 
# In  --> receive data = 4b
5686 
# In  --> receive data = 00
5687 
# In  --> StopTime = x, SE0StartTime = x
5688 
# In  --> receive data = 00
5689 
# In  --> StopTime = x, SE0StartTime = x
5690 
# In  --> EOP asserted for 2 bit time at time 4166495000
5691 
# (tb.u_uart_agent.read_char_chk.loop_2) Data match  53
5692 
# ... Read Data from UART done cnt :        40...
5693 
# -------------------- Reporting Configuration --------------------
5694 
#       Data bit number setting is : 8
5695 
#       Stop bit number setting is : 1
5696 
#       Divisor of Uart clock   is : 15
5697 
#       Parity is enable
5698 
#       Even parity setting
5699 
#       FIFO mode is disable
5700 
# -----------------------------------------------------------------
5701 
# -------------------- Reporting Status --------------------
5702 
#
5703 
#       Number of character received is :    40
5704 
#       Number of character sent     is :    40
5705 
#       Number of parity error rxd   is :     0
5706 
#       Number of stop1  error rxd   is :     0
5707 
#       Number of stop2  error rxd   is :     0
5708 
#       Number of timeout error      is :     0
5709 
#       Number of error              is :     0
5710 
# -----------------------------------------------------------------
5711 8 dinesha 
# ** Note: $finish    : ../tb/tb.v(247)
5712 3 dinesha 
#    Time: 4225639240 ps  Iteration: 0  Instance: /tb

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.