Subversion Repositories usbhostslave

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// USBHostControlBI.v                                           ////

////                                                              ////

//// This file is part of the usbhostslave opencores effort.

//// <http://www.opencores.org/cores//>                           ////

////                                                              ////

//// Module Description:                                          ////

//// 

////                                                              ////

//// To Do:                                                       ////

//// 

////                                                              ////

//// Author(s):                                                   ////

//// - Steve Fielding, sfielding@base2designs.com                 ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2004 Steve Fielding and OPENCORES.ORG          ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE. See the GNU Lesser General Public License for more  ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from <http://www.opencores.org/lgpl.shtml>                   ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

`timescale 1ns / 1ps

`include "usbHostControl_h.v"

module USBHostControlBI (address, dataIn, dataOut, writeEn,

  strobe_i,

  clk, rst,

  SOFSentIntOut, connEventIntOut, resumeIntOut, transDoneIntOut,

  TxTransTypeReg, TxSOFEnableReg,

  TxAddrReg, TxEndPReg, frameNumIn,

  RxPktStatusIn, RxPIDIn,

  connectStateIn,

  SOFSentIn, connEventIn, resumeIntIn, transDoneIn,

  hostControlSelect,

  clrTransReq,

  preambleEn,

  SOFSync,

  TxLineState,

  LineDirectControlEn,

  fullSpeedPol,

  fullSpeedRate,

  transReq,

  isoEn,

  SOFTimer

  );

input [3:0] address;

input [7:0] dataIn;

input writeEn;

input strobe_i;

input clk;

input rst;

output [7:0] dataOut;

output SOFSentIntOut;

output connEventIntOut;

output resumeIntOut;

output transDoneIntOut;

output [1:0] TxTransTypeReg;

output TxSOFEnableReg;

output [6:0] TxAddrReg;

output [3:0] TxEndPReg;

input [10:0] frameNumIn;

input [7:0] RxPktStatusIn;

input [3:0] RxPIDIn;

input [1:0] connectStateIn;

input SOFSentIn;

input connEventIn;

input resumeIntIn;

input transDoneIn;

input hostControlSelect;

input clrTransReq;

output preambleEn;

output SOFSync;

output [1:0] TxLineState;

output LineDirectControlEn;

output fullSpeedPol;

output fullSpeedRate;

output transReq;

output isoEn;     //enable isochronous mode

input [15:0] SOFTimer;

wire [3:0] address;

wire [7:0] dataIn;

wire writeEn;

wire strobe_i;

wire clk;

wire rst;

reg [7:0] dataOut;

reg SOFSentIntOut;

reg connEventIntOut;

reg resumeIntOut;

reg transDoneIntOut;

reg [1:0] TxTransTypeReg;

reg TxSOFEnableReg;

reg [6:0] TxAddrReg;

reg [3:0] TxEndPReg;

wire [10:0] frameNumIn;

wire [7:0] RxPktStatusIn;

wire [3:0] RxPIDIn;

wire [1:0] connectStateIn;

wire SOFSentIn;

wire connEventIn;

wire resumeIntIn;

wire transDoneIn;

wire hostControlSelect;

wire clrTransReq;

reg preambleEn;

reg SOFSync;

reg [1:0] TxLineState;

reg LineDirectControlEn;

reg fullSpeedPol;

reg fullSpeedRate;

reg transReq;

reg isoEn;

wire [15:0] SOFTimer;

//internal wire and regs

reg [1:0] TxControlReg;

reg [4:0] TxLineControlReg;

reg clrSOFReq;

reg clrConnEvtReq;

reg clrResInReq;

reg clrTransDoneReq;

reg SOFSentInt;

reg connEventInt;

reg resumeInt;

reg transDoneInt;

reg [3:0] interruptMaskReg;

reg setTransReq;

//sync write demux

always @(posedge clk)

begin

  if (rst == 1'b1) begin

    isoEn <= 1'b0;

    preambleEn <= 1'b0;

    SOFSync <= 1'b0;

    TxTransTypeReg <= 2'b00;

    TxLineControlReg <= 5'h00;

    TxSOFEnableReg <= 1'b0;

    TxAddrReg <= 7'h00;

    TxEndPReg <= 4'h0;

    interruptMaskReg <= 4'h0;

  end

  else begin

    clrSOFReq <= 1'b0;

    clrConnEvtReq <= 1'b0;

    clrResInReq <= 1'b0;

    clrTransDoneReq <= 1'b0;

    setTransReq <= 1'b0;

    if (writeEn == 1'b1 && strobe_i == 1'b1 && hostControlSelect == 1'b1)

    begin

      case (address)

        `TX_CONTROL_REG : begin

          isoEn <= dataIn[`ISO_ENABLE_BIT];

          preambleEn <= dataIn[`PREAMBLE_ENABLE_BIT];

          SOFSync <= dataIn[`SOF_SYNC_BIT];

          setTransReq <= dataIn[`TRANS_REQ_BIT];

        end

        `TX_TRANS_TYPE_REG : TxTransTypeReg <= dataIn[1:0];

        `TX_LINE_CONTROL_REG : TxLineControlReg <= dataIn[4:0];

        `TX_SOF_ENABLE_REG : TxSOFEnableReg <= dataIn[`SOF_EN_BIT];

        `TX_ADDR_REG : TxAddrReg <= dataIn[6:0];

        `TX_ENDP_REG : TxEndPReg <= dataIn[3:0];

        `INTERRUPT_STATUS_REG :  begin

          clrSOFReq <= dataIn[`SOF_SENT_BIT];

          clrConnEvtReq <= dataIn[`CONNECTION_EVENT_BIT];

          clrResInReq <= dataIn[`RESUME_INT_BIT];

          clrTransDoneReq <= dataIn[`TRANS_DONE_BIT];

        end

        `INTERRUPT_MASK_REG  : interruptMaskReg <= dataIn[3:0];

      endcase

    end

  end

end

//interrupt control

always @(posedge clk)

begin

  if (rst == 1'b1) begin

    SOFSentInt <= 1'b0;

    connEventInt <= 1'b0;

    resumeInt <= 1'b0;

    transDoneInt <= 1'b0;

  end

  else begin

    if (SOFSentIn == 1'b1)

      SOFSentInt <= 1'b1;

    else if (clrSOFReq == 1'b1)

      SOFSentInt <= 1'b0;

    if (connEventIn == 1'b1)

      connEventInt <= 1'b1;

    else if (clrConnEvtReq == 1'b1)

      connEventInt <= 1'b0;

    if (resumeIntIn == 1'b1)

      resumeInt <= 1'b1;

    else if (clrResInReq == 1'b1)

      resumeInt <= 1'b0;

    if (transDoneIn == 1'b1)

      transDoneInt <= 1'b1;

    else if (clrTransDoneReq == 1'b1)

      transDoneInt <= 1'b0;

  end

end

//mask interrupts

always @(interruptMaskReg or transDoneInt or resumeInt or connEventInt or SOFSentInt) begin

  transDoneIntOut <= transDoneInt & interruptMaskReg[`TRANS_DONE_BIT];

  resumeIntOut <= resumeInt & interruptMaskReg[`RESUME_INT_BIT];

  connEventIntOut <= connEventInt & interruptMaskReg[`CONNECTION_EVENT_BIT];

  SOFSentIntOut <= SOFSentInt & interruptMaskReg[`SOF_SENT_BIT];

end

//transaction request set/clear

always @(posedge clk)

begin

  if (rst == 1'b1) begin

    transReq <= 1'b0;

  end

  else begin

    if (setTransReq == 1'b1)

      transReq <= 1'b1;

    else if (clrTransReq == 1'b1)

      transReq <= 1'b0;

  end

end

//break out control signals

always @(TxControlReg or TxLineControlReg) begin

  TxLineState <= TxLineControlReg[`TX_LINE_STATE_MSBIT:`TX_LINE_STATE_LSBIT];

  LineDirectControlEn <= TxLineControlReg[`DIRECT_CONTROL_BIT];

  fullSpeedPol <= TxLineControlReg[`FULL_SPEED_LINE_POLARITY_BIT];

  fullSpeedRate <= TxLineControlReg[`FULL_SPEED_LINE_RATE_BIT];

end

// async read mux

always @(address or

  TxControlReg or TxTransTypeReg or TxLineControlReg or TxSOFEnableReg or

  TxAddrReg or TxEndPReg or frameNumIn or

  SOFSentInt or connEventInt or resumeInt or transDoneInt or

  interruptMaskReg or RxPktStatusIn or RxPIDIn or connectStateIn or

  preambleEn or SOFSync or transReq or isoEn)

begin

  case (address)

      `TX_CONTROL_REG : dataOut <= {4'b0000, isoEn, preambleEn, SOFSync, transReq} ;

      `TX_TRANS_TYPE_REG : dataOut <= {6'b000000, TxTransTypeReg};

      `TX_LINE_CONTROL_REG : dataOut <= {3'b000, TxLineControlReg};

      `TX_SOF_ENABLE_REG : dataOut <= {7'b0000000, TxSOFEnableReg};

      `TX_ADDR_REG : dataOut <= {1'b0, TxAddrReg};

      `TX_ENDP_REG : dataOut <= {4'h0, TxEndPReg};

      `FRAME_NUM_MSB_REG : dataOut <= {5'b00000, frameNumIn[10:8]};

      `FRAME_NUM_LSB_REG : dataOut <= frameNumIn[7:0];

      `INTERRUPT_STATUS_REG :  dataOut <= {4'h0, SOFSentInt, connEventInt, resumeInt, transDoneInt};

      `INTERRUPT_MASK_REG  : dataOut <= {4'h0, interruptMaskReg};

      `RX_STATUS_REG  : dataOut <= RxPktStatusIn;

      `RX_PID_REG  : dataOut <= {4'b0000, RxPIDIn};

      `RX_CONNECT_STATE_REG : dataOut <= {6'b000000, connectStateIn};

      `HOST_SOF_TIMER_MSB_REG : dataOut <= SOFTimer[15:8];

      default: dataOut <= 8'h00;

  endcase

end

endmodule