URL https://opencores.org/ocsvn/versatile_library/versatile_library/trunk

Subversion Repositories versatile_library

[/] [versatile_library/] [trunk/] [rtl/] [verilog/] [versatile_library_actel.v] - Blame information for rev 127

Go to most recent revision | Details | Compare with Previous | View Log


// default SYN_KEEP definition
    // ACTEL FPGA should not use logic to handle rw collision
// size to width
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile library, clock and reset                          ////
////                                                              ////
////  Description                                                 ////
////  Logic related to clock and reset                            ////
////                                                              ////
////                                                              ////
////  To Do:                                                      ////
////   - add more different registers                             ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2010 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
`timescale 1 ns/100 ps
// Global buffer
// usage:
// use to enable global buffers for high fan out signals such as clock and reset
// Version: 8.4 8.4.0.33
module gbuf(GL,CLK);
output GL;
input  CLK;
    wire GND;
    GND GND_1_net(.Y(GND));
    CLKDLY Inst1(.CLK(CLK), .GL(GL), .DLYGL0(GND), .DLYGL1(GND),
        .DLYGL2(GND), .DLYGL3(GND), .DLYGL4(GND)) /* synthesis black_box */;
endmodule
`timescale 1 ns/1 ns
module vl_gbuf ( i, o);
input i;
output o;
`ifdef SIM_GBUF
assign o=i;
`else
gbuf gbuf_i0 ( .CLK(i), .GL(o));
`endif
endmodule
 //ACTEL
// sync reset
// input active lo async reset, normally from external reset generator and/or switch
// output active high global reset sync with two DFFs 
`timescale 1 ns/100 ps
module vl_sync_rst ( rst_n_i, rst_o, clk);
input rst_n_i, clk;
output rst_o;
reg [1:0] tmp;
always @ (posedge clk or negedge rst_n_i)
if (!rst_n_i)
        tmp <= 2'b11;
else
        tmp <= {1'b0,tmp[1]};
vl_gbuf buf_i0( .i(tmp[0]), .o(rst_o));
endmodule
// vl_pll
///////////////////////////////////////////////////////////////////////////////
`timescale 1 ps/1 ps
module vl_pll ( clk_i, rst_n_i, lock, clk_o, rst_o);
parameter index = 0;
parameter number_of_clk = 1;
parameter period_time_0 = 20000;
parameter period_time_1 = 20000;
parameter period_time_2 = 20000;
parameter lock_delay = 2000000;
input clk_i, rst_n_i;
output lock;
output reg [0:number_of_clk-1] clk_o;
output [0:number_of_clk-1] rst_o;
`ifdef SIM_PLL
always
     #((period_time_0)/2) clk_o[0] <=  (!rst_n_i) ? 0 : ~clk_o[0];
generate if (number_of_clk > 1)
always
     #((period_time_1)/2) clk_o[1] <=  (!rst_n_i) ? 0 : ~clk_o[1];
endgenerate
generate if (number_of_clk > 2)
always
     #((period_time_2)/2) clk_o[2] <=  (!rst_n_i) ? 0 : ~clk_o[2];
endgenerate
genvar i;
generate for (i=0;i<number_of_clk;i=i+1) begin: clock
     vl_sync_rst rst_i0 ( .rst_n_i(rst_n_i | lock), .rst_o(rst_o[i]), .clk(clk_o[i]));
end
endgenerate
assign #lock_delay lock = rst_n_i;
endmodule
`else
generate if (number_of_clk==1 & index==0) begin
        pll0 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]));
end
endgenerate // index==0
generate if (number_of_clk==1 & index==1) begin
        pll1 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]));
end
endgenerate // index==1
generate if (number_of_clk==1 & index==2) begin
        pll2 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]));
end
endgenerate // index==2
generate if (number_of_clk==1 & index==3) begin
        pll3 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]));
end
endgenerate // index==0
generate if (number_of_clk==2 & index==0) begin
        pll0 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]));
end
endgenerate // index==0
generate if (number_of_clk==2 & index==1) begin
        pll1 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]));
end
endgenerate // index==1
generate if (number_of_clk==2 & index==2) begin
        pll2 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]));
end
endgenerate // index==2
generate if (number_of_clk==2 & index==3) begin
        pll3 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]));
end
endgenerate // index==0
generate if (number_of_clk==3 & index==0) begin
        pll0 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2]));
end
endgenerate // index==0
generate if (number_of_clk==3 & index==1) begin
        pll1 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2]));
end
endgenerate // index==1
generate if (number_of_clk==3 & index==2) begin
        pll2 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2]));
end
endgenerate // index==2
generate if (number_of_clk==3 & index==3) begin
        pll3 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2]));
end
endgenerate // index==0
genvar i;
generate for (i=0;i<number_of_clk;i=i+1) begin: clock
        vl_sync_rst rst_i0 ( .rst_n_i(rst_n_i | lock), .rst_o(rst_o), .clk(clk_o[i]));
end
endgenerate
endmodule
`endif
///////////////////////////////////////////////////////////////////////////////
 //actel
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile library, registers                                ////
////                                                              ////
////  Description                                                 ////
////  Different type of registers                                 ////
////                                                              ////
////                                                              ////
////  To Do:                                                      ////
////   - add more different registers                             ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2010 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
module vl_dff ( d, q, clk, rst);
        parameter width = 1;
        parameter reset_value = 0;
        input [width-1:0] d;
        input clk, rst;
        output reg [width-1:0] q;
        always @ (posedge clk or posedge rst)
        if (rst)
                q <= reset_value;
        else
                q <= d;
endmodule
module vl_dff_array ( d, q, clk, rst);
        parameter width = 1;
        parameter depth = 2;
        parameter reset_value = 1'b0;
        input [width-1:0] d;
        input clk, rst;
        output [width-1:0] q;
        reg  [0:depth-1] q_tmp [width-1:0];
        integer i;
        always @ (posedge clk or posedge rst)
        if (rst) begin
            for (i=0;i<depth;i=i+1)
                q_tmp[i] <= {width{reset_value}};
        end else begin
            q_tmp[0] <= d;
            for (i=1;i<depth;i=i+1)
                q_tmp[i] <= q_tmp[i-1];
        end
    assign q = q_tmp[depth-1];
endmodule
module vl_dff_ce ( d, ce, q, clk, rst);
        parameter width = 1;
        parameter reset_value = 0;
        input [width-1:0] d;
        input ce, clk, rst;
        output reg [width-1:0] q;
        always @ (posedge clk or posedge rst)
        if (rst)
                q <= reset_value;
        else
                if (ce)
                        q <= d;
endmodule
module vl_dff_ce_clear ( d, ce, clear, q, clk, rst);
        parameter width = 1;
        parameter reset_value = 0;
        input [width-1:0] d;
        input ce, clear, clk, rst;
        output reg [width-1:0] q;
        always @ (posedge clk or posedge rst)
        if (rst)
            q <= reset_value;
        else
            if (ce)
                if (clear)
                    q <= {width{1'b0}};
                else
                    q <= d;
endmodule
module vl_dff_ce_set ( d, ce, set, q, clk, rst);
        parameter width = 1;
        parameter reset_value = 0;
        input [width-1:0] d;
        input ce, set, clk, rst;
        output reg [width-1:0] q;
        always @ (posedge clk or posedge rst)
        if (rst)
            q <= reset_value;
        else
            if (ce)
                if (set)
                    q <= {width{1'b1}};
                else
                    q <= d;
endmodule
module vl_spr ( sp, r, q, clk, rst);
        //parameter width = 1;
        parameter reset_value = 1'b0;
        input sp, r;
        output reg q;
        input clk, rst;
        always @ (posedge clk or posedge rst)
        if (rst)
            q <= reset_value;
        else
            if (sp)
                q <= 1'b1;
            else if (r)
                q <= 1'b0;
endmodule
module vl_srp ( s, rp, q, clk, rst);
        parameter width = 1;
        parameter reset_value = 0;
        input s, rp;
        output reg q;
        input clk, rst;
        always @ (posedge clk or posedge rst)
        if (rst)
            q <= reset_value;
        else
            if (rp)
                q <= 1'b0;
            else if (s)
                q <= 1'b1;
endmodule
module vl_dff_sr ( aclr, aset, clock, data, q);
    input         aclr;
    input         aset;
    input         clock;
    input         data;
    output reg    q;
   always @ (posedge clock or posedge aclr or posedge aset)
     if (aclr)
       q <= 1'b0;
     else if (aset)
       q <= 1'b1;
     else
       q <= data;
endmodule
// LATCH
// For targtes not supporting LATCH use dff_sr with clk=1 and data=1
module vl_latch ( d, le, q, clk);
input d, le;
input clk;
always @ (le or d)
if (le)
    d <= q;
endmodule
module vl_shreg ( d, q, clk, rst);
parameter depth = 10;
input d;
output q;
input clk, rst;
reg [1:depth] dffs;
always @ (posedge clk or posedge rst)
if (rst)
    dffs <= {depth{1'b0}};
else
    dffs <= {d,dffs[1:depth-1]};
assign q = dffs[depth];
endmodule
module vl_shreg_ce ( d, ce, q, clk, rst);
parameter depth = 10;
input d, ce;
output q;
input clk, rst;
reg [1:depth] dffs;
always @ (posedge clk or posedge rst)
if (rst)
    dffs <= {depth{1'b0}};
else
    if (ce)
        dffs <= {d,dffs[1:depth-1]};
assign q = dffs[depth];
endmodule
module vl_delay ( d, q, clk, rst);
parameter depth = 10;
input d;
output q;
input clk, rst;
reg [1:depth] dffs;
always @ (posedge clk or posedge rst)
if (rst)
    dffs <= {depth{1'b0}};
else
    dffs <= {d,dffs[1:depth-1]};
assign q = dffs[depth];
endmodule
module vl_delay_emptyflag ( d, q, emptyflag, clk, rst);
parameter depth = 10;
input d;
output q, emptyflag;
input clk, rst;
reg [1:depth] dffs;
always @ (posedge clk or posedge rst)
if (rst)
    dffs <= {depth{1'b0}};
else
    dffs <= {d,dffs[1:depth-1]};
assign q = dffs[depth];
assign emptyflag = !(|dffs);
endmodule
module vl_pulse2toggle ( pl, q, clk, rst);
input pl;
output reg q;
input clk, rst;
always @ (posedge clk or posedge rst)
if (rst)
    q <= 1'b0;
else
    q <= pl ^ q;
endmodule
module vl_toggle2pulse (d, pl, clk, rst);
input d;
output pl;
input clk, rst;
reg dff;
always @ (posedge clk or posedge rst)
if (rst)
    dff <= 1'b0;
else
    dff <= d;
assign pl = d ^ dff;
endmodule
module vl_synchronizer (d, q, clk, rst);
input d;
output reg q;
input clk, rst;
reg dff;
always @ (posedge clk or posedge rst)
if (rst)
    {q,dff} <= 2'b00;
else
    {q,dff} <= {dff,d};
endmodule
module vl_cdc ( start_pl, take_it_pl, take_it_grant_pl, got_it_pl, clk_src, rst_src, clk_dst, rst_dst);
input start_pl;
output take_it_pl;
input take_it_grant_pl; // note: connect to take_it_pl to generate automatic ack
output got_it_pl;
input clk_src, rst_src;
input clk_dst, rst_dst;
wire take_it_tg, take_it_tg_sync;
wire got_it_tg, got_it_tg_sync;
// src -> dst
vl_pulse2toggle p2t0 (
    .pl(start_pl),
    .q(take_it_tg),
    .clk(clk_src),
    .rst(rst_src));
vl_synchronizer sync0 (
    .d(take_it_tg),
    .q(take_it_tg_sync),
    .clk(clk_dst),
    .rst(rst_dst));
vl_toggle2pulse t2p0 (
    .d(take_it_tg_sync),
    .pl(take_it_pl),
    .clk(clk_dst),
    .rst(rst_dst));
// dst -> src
vl_pulse2toggle p2t1 (
    .pl(take_it_grant_pl),
    .q(got_it_tg),
    .clk(clk_dst),
    .rst(rst_dst));
vl_synchronizer sync1 (
    .d(got_it_tg),
    .q(got_it_tg_sync),
    .clk(clk_src),
    .rst(rst_src));
vl_toggle2pulse t2p1 (
    .d(got_it_tg_sync),
    .pl(got_it_pl),
    .clk(clk_src),
    .rst(rst_src));
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Logic functions                                             ////
////                                                              ////
////  Description                                                 ////
////  Logic functions such as multiplexers                        ////
////                                                              ////
////                                                              ////
////  To Do:                                                      ////
////   -                                                          ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2010 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
module vl_mux_andor ( a, sel, dout);
parameter width = 32;
parameter nr_of_ports = 4;
input [nr_of_ports*width-1:0] a;
input [nr_of_ports-1:0] sel;
output reg [width-1:0] dout;
integer i,j;
always @ (a, sel)
begin
    dout = a[width-1:0] & {width{sel[0]}};
    for (i=1;i<nr_of_ports;i=i+1)
        for (j=0;j<width;j=j+1)
            dout[j] = (a[i*width + j] & sel[i]) | dout[j];
end
endmodule
module vl_mux2_andor ( a1, a0, sel, dout);
parameter width = 32;
localparam nr_of_ports = 2;
input [width-1:0] a1, a0;
input [nr_of_ports-1:0] sel;
output [width-1:0] dout;
vl_mux_andor
    # ( .width(width), .nr_of_ports(nr_of_ports))
    mux0( .a({a1,a0}), .sel(sel), .dout(dout));
endmodule
module vl_mux3_andor ( a2, a1, a0, sel, dout);
parameter width = 32;
localparam nr_of_ports = 3;
input [width-1:0] a2, a1, a0;
input [nr_of_ports-1:0] sel;
output [width-1:0] dout;
vl_mux_andor
    # ( .width(width), .nr_of_ports(nr_of_ports))
    mux0( .a({a2,a1,a0}), .sel(sel), .dout(dout));
endmodule
module vl_mux4_andor ( a3, a2, a1, a0, sel, dout);
parameter width = 32;
localparam nr_of_ports = 4;
input [width-1:0] a3, a2, a1, a0;
input [nr_of_ports-1:0] sel;
output [width-1:0] dout;
vl_mux_andor
    # ( .width(width), .nr_of_ports(nr_of_ports))
    mux0( .a({a3,a2,a1,a0}), .sel(sel), .dout(dout));
endmodule
module vl_mux5_andor ( a4, a3, a2, a1, a0, sel, dout);
parameter width = 32;
localparam nr_of_ports = 5;
input [width-1:0] a4, a3, a2, a1, a0;
input [nr_of_ports-1:0] sel;
output [width-1:0] dout;
vl_mux_andor
    # ( .width(width), .nr_of_ports(nr_of_ports))
    mux0( .a({a4,a3,a2,a1,a0}), .sel(sel), .dout(dout));
endmodule
module vl_mux6_andor ( a5, a4, a3, a2, a1, a0, sel, dout);
parameter width = 32;
localparam nr_of_ports = 6;
input [width-1:0] a5, a4, a3, a2, a1, a0;
input [nr_of_ports-1:0] sel;
output [width-1:0] dout;
vl_mux_andor
    # ( .width(width), .nr_of_ports(nr_of_ports))
    mux0( .a({a5,a4,a3,a2,a1,a0}), .sel(sel), .dout(dout));
endmodule
module vl_parity_generate (data, parity);
parameter word_size = 32;
parameter chunk_size = 8;
parameter parity_type = 1'b0; // 0 - even, 1 - odd parity
input [word_size-1:0] data;
output reg [word_size/chunk_size-1:0] parity;
integer i,j;
always @ (data)
for (i=0;i<word_size/chunk_size;i=i+1) begin
    parity[i] = parity_type;
    for (j=0;j<chunk_size;j=j+1) begin
        parity[i] = data[i*chunk_size+j] ^ parity[i];
    end
end
endmodule
module vl_parity_check( data, parity, parity_error);
parameter word_size = 32;
parameter chunk_size = 8;
parameter parity_type = 1'b0; // 0 - even, 1 - odd parity
input [word_size-1:0] data;
input [word_size/chunk_size-1:0] parity;
output parity_error;
reg [word_size/chunk_size-1:0] error_flag;
integer i,j;
always @ (data or parity)
for (i=0;i<word_size/chunk_size;i=i+1) begin
    error_flag[i] = parity[i] ^ parity_type;
    for (j=0;j<chunk_size;j=j+1) begin
        error_flag[i] = data[i*chunk_size+j] ^ error_flag[i];
    end
end
assign parity_error = |error_flag;
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  IO functions                                                ////
////                                                              ////
////  Description                                                 ////
////  IO functions such as IOB flip-flops                         ////
////                                                              ////
////                                                              ////
////  To Do:                                                      ////
////   -                                                          ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2010 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
`timescale 1ns/1ns
module vl_o_dff (d_i, o_pad, clk, rst);
parameter width = 1;
parameter reset_value = {width{1'b0}};
input  [width-1:0]  d_i;
output [width-1:0] o_pad;
input clk, rst;
wire [width-1:0] d_i_int /*synthesis syn_keep = 1*/;
reg  [width-1:0] o_pad_int;
assign d_i_int = d_i;
genvar i;
generate
for (i=0;i<width;i=i+1) begin
    always @ (posedge clk or posedge rst)
    if (rst)
        o_pad_int[i] <= reset_value[i];
    else
        o_pad_int[i] <= d_i_int[i];
    assign #1 o_pad[i] = o_pad_int[i];
end
endgenerate
endmodule
`timescale 1ns/1ns
module vl_io_dff_oe ( d_i, d_o, oe, io_pad, clk, rst);
parameter width = 1;
input  [width-1:0] d_o;
output reg [width-1:0] d_i;
input oe;
inout [width-1:0] io_pad;
input clk, rst;
wire [width-1:0] oe_d /*synthesis syn_keep = 1*/;
reg [width-1:0] oe_q;
reg [width-1:0] d_o_q;
assign oe_d = {width{oe}};
genvar i;
generate
for (i=0;i<width;i=i+1) begin
    always @ (posedge clk or posedge rst)
    if (rst)
        oe_q[i] <= 1'b0;
    else
        oe_q[i] <= oe_d[i];
    always @ (posedge clk or posedge rst)
    if (rst)
        d_o_q[i] <= 1'b0;
    else
        d_o_q[i] <= d_o[i];
    always @ (posedge clk or posedge rst)
    if (rst)
        d_i[i] <= 1'b0;
    else
        d_i[i] <= io_pad[i];
    assign #1 io_pad[i] = (oe_q[i]) ? d_o_q[i] : 1'bz;
end
endgenerate
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile counter                                           ////
////                                                              ////
////  Description                                                 ////
////  Versatile counter, a reconfigurable binary, gray or LFSR    ////
////  counter                                                     ////
////                                                              ////
////  To Do:                                                      ////
////   - add LFSR with more taps                                  ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2009 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
// binary counter
module vl_cnt_bin_ce (
 cke, q, rst, clk);
   parameter length = 4;
   input cke;
   output [length:1] q;
   input rst;
   input clk;
   parameter clear_value = 0;
   parameter set_value = 1;
   parameter wrap_value = 0;
   parameter level1_value = 15;
   reg  [length:1] qi;
   wire [length:1] q_next;
   assign q_next = qi + {{length-1{1'b0}},1'b1};
   always @ (posedge clk or posedge rst)
     if (rst)
       qi <= {length{1'b0}};
     else
     if (cke)
       qi <= q_next;
   assign q = qi;
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile counter                                           ////
////                                                              ////
////  Description                                                 ////
////  Versatile counter, a reconfigurable binary, gray or LFSR    ////
////  counter                                                     ////
////                                                              ////
////  To Do:                                                      ////
////   - add LFSR with more taps                                  ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2009 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
// binary counter
module vl_cnt_bin_ce_rew_zq_l1 (
 cke, rew, zq, level1, rst, clk);
   parameter length = 4;
   input cke;
   input rew;
   output reg zq;
   output reg level1;
   input rst;
   input clk;
   parameter clear_value = 0;
   parameter set_value = 1;
   parameter wrap_value = 1;
   parameter level1_value = 15;
   wire clear;
   assign clear = 1'b0;
   reg  [length:1] qi;
   wire  [length:1] q_next, q_next_fw, q_next_rew;
   assign q_next_fw  = qi + {{length-1{1'b0}},1'b1};
   assign q_next_rew = qi - {{length-1{1'b0}},1'b1};
   assign q_next = rew ? q_next_rew : q_next_fw;
   always @ (posedge clk or posedge rst)
     if (rst)
       qi <= {length{1'b0}};
     else
     if (cke)
       qi <= q_next;
   always @ (posedge clk or posedge rst)
     if (rst)
       zq <= 1'b1;
     else
     if (cke)
       zq <= q_next == {length{1'b0}};
    always @ (posedge clk or posedge rst)
    if (rst)
        level1 <= 1'b0;
    else
    if (cke)
    if (clear)
        level1 <= 1'b0;
    else if (q_next == level1_value)
        level1 <= 1'b1;
    else if (qi == level1_value & rew)
        level1 <= 1'b0;
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile counter                                           ////
////                                                              ////
////  Description                                                 ////
////  Versatile counter, a reconfigurable binary, gray or LFSR    ////
////  counter                                                     ////
////                                                              ////
////  To Do:                                                      ////
////   - add LFSR with more taps                                  ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2009 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
// binary counter
module vl_cnt_bin_ce_rew_q_zq_l1 (
 cke, rew, q, zq, level1, rst, clk);
   parameter length = 4;
   input cke;
   input rew;
   output [length:1] q;
   output reg zq;
   output reg level1;
   input rst;
   input clk;
   parameter clear_value = 0;
   parameter set_value = 1;
   parameter wrap_value = 1;
   parameter level1_value = 15;
   wire clear;
   assign clear = 1'b0;
   reg  [length:1] qi;
   wire  [length:1] q_next, q_next_fw, q_next_rew;
   assign q_next_fw  = qi + {{length-1{1'b0}},1'b1};
   assign q_next_rew = qi - {{length-1{1'b0}},1'b1};
   assign q_next = rew ? q_next_rew : q_next_fw;
   always @ (posedge clk or posedge rst)
     if (rst)
       qi <= {length{1'b0}};
     else
     if (cke)
       qi <= q_next;
   assign q = qi;
   always @ (posedge clk or posedge rst)
     if (rst)
       zq <= 1'b1;
     else
     if (cke)
       zq <= q_next == {length{1'b0}};
    always @ (posedge clk or posedge rst)
    if (rst)
        level1 <= 1'b0;
    else
    if (cke)
    if (clear)
        level1 <= 1'b0;
    else if (q_next == level1_value)
        level1 <= 1'b1;
    else if (qi == level1_value & rew)
        level1 <= 1'b0;
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile counter                                           ////
////                                                              ////
////  Description                                                 ////
////  Versatile counter, a reconfigurable binary, gray or LFSR    ////
////  counter                                                     ////
////                                                              ////
////  To Do:                                                      ////
////   - add LFSR with more taps                                  ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2009 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
// LFSR counter
module vl_cnt_lfsr_ce (
 cke, zq, rst, clk);
   parameter length = 4;
   input cke;
   output reg zq;
   input rst;
   input clk;
   parameter clear_value = 0;
   parameter set_value = 1;
   parameter wrap_value = 0;
   parameter level1_value = 15;
   reg  [length:1] qi;
   reg lfsr_fb;
   wire [length:1] q_next;
   reg [32:1] polynom;
   integer i;
   always @ (qi)
   begin
        case (length)
         2: polynom = 32'b11;                               // 0x3
         3: polynom = 32'b110;                              // 0x6
         4: polynom = 32'b1100;                             // 0xC
         5: polynom = 32'b10100;                            // 0x14
         6: polynom = 32'b110000;                           // 0x30
         7: polynom = 32'b1100000;                          // 0x60
         8: polynom = 32'b10111000;                         // 0xb8
         9: polynom = 32'b100010000;                        // 0x110
        10: polynom = 32'b1001000000;                       // 0x240
        11: polynom = 32'b10100000000;                      // 0x500
        12: polynom = 32'b100000101001;                     // 0x829
        13: polynom = 32'b1000000001100;                    // 0x100C
        14: polynom = 32'b10000000010101;                   // 0x2015
        15: polynom = 32'b110000000000000;                  // 0x6000
        16: polynom = 32'b1101000000001000;                 // 0xD008
        17: polynom = 32'b10010000000000000;                // 0x12000
        18: polynom = 32'b100000010000000000;               // 0x20400
        19: polynom = 32'b1000000000000100011;              // 0x40023
        20: polynom = 32'b10010000000000000000;             // 0x90000
        21: polynom = 32'b101000000000000000000;            // 0x140000
        22: polynom = 32'b1100000000000000000000;           // 0x300000
        23: polynom = 32'b10000100000000000000000;          // 0x420000
        24: polynom = 32'b111000010000000000000000;         // 0xE10000
        25: polynom = 32'b1001000000000000000000000;        // 0x1200000
        26: polynom = 32'b10000000000000000000100011;       // 0x2000023
        27: polynom = 32'b100000000000000000000010011;      // 0x4000013
        28: polynom = 32'b1100100000000000000000000000;     // 0xC800000
        29: polynom = 32'b10100000000000000000000000000;    // 0x14000000
        30: polynom = 32'b100000000000000000000000101001;   // 0x20000029
        31: polynom = 32'b1001000000000000000000000000000;  // 0x48000000
        32: polynom = 32'b10000000001000000000000000000011; // 0x80200003
        default: polynom = 32'b0;
        endcase
        lfsr_fb = qi[length];
        for (i=length-1; i>=1; i=i-1) begin
            if (polynom[i])
                lfsr_fb = lfsr_fb  ~^ qi[i];
        end
    end
   assign q_next = (qi == wrap_value) ? {length{1'b0}} :{qi[length-1:1],lfsr_fb};
   always @ (posedge clk or posedge rst)
     if (rst)
       qi <= {length{1'b0}};
     else
     if (cke)
       qi <= q_next;
   always @ (posedge clk or posedge rst)
     if (rst)
       zq <= 1'b1;
     else
     if (cke)
       zq <= q_next == {length{1'b0}};
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile counter                                           ////
////                                                              ////
////  Description                                                 ////
////  Versatile counter, a reconfigurable binary, gray or LFSR    ////
////  counter                                                     ////
////                                                              ////
////  To Do:                                                      ////
////   - add LFSR with more taps                                  ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2009 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
// GRAY counter
module vl_cnt_gray_ce_bin (
 cke, q, q_bin, rst, clk);
   parameter length = 4;
   input cke;
   output reg [length:1] q;
   output [length:1] q_bin;
   input rst;
   input clk;
   parameter clear_value = 0;
   parameter set_value = 1;
   parameter wrap_value = 8;
   parameter level1_value = 15;
   reg  [length:1] qi;
   wire [length:1] q_next;
   assign q_next = qi + {{length-1{1'b0}},1'b1};
   always @ (posedge clk or posedge rst)
     if (rst)
       qi <= {length{1'b0}};
     else
     if (cke)
       qi <= q_next;
   always @ (posedge clk or posedge rst)
     if (rst)
       q <= {length{1'b0}};
     else
       if (cke)
         q <= (q_next>>1) ^ q_next;
   assign q_bin = qi;
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile library, counters                                 ////
////                                                              ////
////  Description                                                 ////
////  counters                                                    ////
////                                                              ////
////                                                              ////
////  To Do:                                                      ////
////   - add more counters                                        ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2010 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
module vl_cnt_shreg_wrap ( q, rst, clk);
   parameter length = 4;
   output reg [0:length-1] q;
   input rst;
   input clk;
    always @ (posedge clk or posedge rst)
    if (rst)
        q <= {1'b1,{length-1{1'b0}}};
    else
        q <= {q[length-1],q[0:length-2]};
endmodule
module vl_cnt_shreg_ce_wrap ( cke, q, rst, clk);
   parameter length = 4;
   input cke;
   output reg [0:length-1] q;
   input rst;
   input clk;
    always @ (posedge clk or posedge rst)
    if (rst)
        q <= {1'b1,{length-1{1'b0}}};
    else
        if (cke)
            q <= {q[length-1],q[0:length-2]};
endmodule
module vl_cnt_shreg_clear ( clear, q, rst, clk);
   parameter length = 4;
   input clear;
   output reg [0:length-1] q;
   input rst;
   input clk;
    always @ (posedge clk or posedge rst)
    if (rst)
        q <= {1'b1,{length-1{1'b0}}};
    else
        if (clear)
            q <= {1'b1,{length-1{1'b0}}};
        else
            q <= q >> 1;
endmodule
module vl_cnt_shreg_ce_clear ( cke, clear, q, rst, clk);
   parameter length = 4;
   input cke, clear;
   output reg [0:length-1] q;
   input rst;
   input clk;
    always @ (posedge clk or posedge rst)
    if (rst)
        q <= {1'b1,{length-1{1'b0}}};
    else
        if (cke)
            if (clear)
                q <= {1'b1,{length-1{1'b0}}};
            else
                q <= q >> 1;
endmodule
module vl_cnt_shreg_ce_clear_wrap ( cke, clear, q, rst, clk);
   parameter length = 4;
   input cke, clear;
   output reg [0:length-1] q;
   input rst;
   input clk;
    always @ (posedge clk or posedge rst)
    if (rst)
        q <= {1'b1,{length-1{1'b0}}};
    else
        if (cke)
            if (clear)
                q <= {1'b1,{length-1{1'b0}}};
            else
            q <= {q[length-1],q[0:length-2]};
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile library, memories                                 ////
////                                                              ////
////  Description                                                 ////
////  memories                                                    ////
////                                                              ////
////                                                              ////
////  To Do:                                                      ////
////   - add more memory types                                    ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2010 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
/// ROM
module vl_rom_init ( adr, q, clk);
   parameter data_width = 32;
   parameter addr_width = 8;
   parameter mem_size = 1<<addr_width;
   input [(addr_width-1):0]       adr;
   output reg [(data_width-1):0] q;
   input                         clk;
   reg [data_width-1:0] rom [mem_size-1:0];
   parameter memory_file = "vl_rom.vmem";
   initial
     begin
        $readmemh(memory_file, rom);
     end
   always @ (posedge clk)
     q <= rom[adr];
endmodule
// Single port RAM
module vl_ram ( d, adr, we, q, clk);
   parameter data_width = 32;
   parameter addr_width = 8;
   parameter mem_size = 1<<addr_width;
   parameter debug = 0;
   input [(data_width-1):0]      d;
   input [(addr_width-1):0]       adr;
   input                         we;
   output reg [(data_width-1):0] q;
   input                         clk;
   reg [data_width-1:0] ram [mem_size-1:0];
    parameter memory_init = 0;
    parameter memory_file = "vl_ram.vmem";
    generate
    if (memory_init == 1) begin : init_mem
        initial
            $readmemh(memory_file, ram);
   end else if (memory_init == 2) begin : init_zero
        integer k;
        initial
            for (k = 0; k < mem_size; k = k + 1)
                ram[k] = 0;
   end
   endgenerate
    generate
    if (debug==1) begin : debug_we
        always @ (posedge clk)
        if (we)
            $display ("Value %h written at address %h : time %t", d, adr, $time);
    end
    endgenerate
   always @ (posedge clk)
   begin
   if (we)
     ram[adr] <= d;
   q <= ram[adr];
   end
endmodule
module vl_ram_be ( d, adr, be, we, q, clk);
   parameter data_width = 32;
   parameter addr_width = 6;
   parameter mem_size = 1<<addr_width;
   input [(data_width-1):0]      d;
   input [(addr_width-1):0]       adr;
   input [(data_width/8)-1:0]    be;
   input                         we;
   output reg [(data_width-1):0] q;
   input                         clk;
`ifdef SYSTEMVERILOG
    // use a multi-dimensional packed array
    //t o model individual bytes within the word
    logic [data_width/8-1:0][7:0] ram [0:mem_size-1];// # words = 1 << address width
`else
    reg [data_width-1:0] ram [mem_size-1:0];
    wire [data_width/8-1:0] cke;
`endif
    parameter memory_init = 0;
    parameter memory_file = "vl_ram.vmem";
    generate
    if (memory_init == 1) begin : init_mem
        initial
            $readmemh(memory_file, ram);
    end else if (memory_init == 2) begin : init_zero
        integer k;
        initial
            for (k = 0; k < mem_size; k = k + 1)
                ram[k] = 0;
    end
   endgenerate
`ifdef SYSTEMVERILOG
always_ff@(posedge clk)
begin
    if(we) begin
        if(be[3]) ram[adr][3] <= d[31:24];
        if(be[2]) ram[adr][2] <= d[23:16];
        if(be[1]) ram[adr][1] <= d[15:8];
        if(be[0]) ram[adr][0] <= d[7:0];
    end
        q <= ram[adr];
end
`else
assign cke = {data_width/8{we}} & be;
   genvar i;
   generate for (i=0;i<data_width/8;i=i+1) begin : be_ram
      always @ (posedge clk)
      if (cke[i])
        ram[adr][(i+1)*8-1:i*8] <= d[(i+1)*8-1:i*8];
   end
   endgenerate
   always @ (posedge clk)
      q <= ram[adr];
`endif
`ifdef verilator
   // Function to access RAM (for use by Verilator).
   function [31:0] get_mem;
      // verilator public
      input [addr_width-1:0]             addr;
      get_mem = ram[addr];
   endfunction // get_mem
   // Function to write RAM (for use by Verilator).
   function set_mem;
      // verilator public
      input [addr_width-1:0]             addr;
      input [data_width-1:0]             data;
      ram[addr] = data;
   endfunction // set_mem
`endif
endmodule
module vl_dpram_1r1w ( d_a, adr_a, we_a, clk_a, q_b, adr_b, clk_b );
   parameter data_width = 32;
   parameter addr_width = 8;
   parameter mem_size = 1<<addr_width;
   input [(data_width-1):0]      d_a;
   input [(addr_width-1):0]       adr_a;
   input [(addr_width-1):0]       adr_b;
   input                         we_a;
   output reg [(data_width-1):0]          q_b;
   input                         clk_a, clk_b;
   reg [data_width-1:0] ram [0:mem_size-1] /*synthesis syn_ramstyle = "no_rw_check"*/;
    parameter memory_init = 0;
    parameter memory_file = "vl_ram.vmem";
    parameter debug = 0;
    generate
    if (memory_init == 1) begin : init_mem
        initial
            $readmemh(memory_file, ram);
    end else if (memory_init == 2) begin : init_zero
        integer k;
        initial
            for (k = 0; k < mem_size; k = k + 1)
                ram[k] = 0;
    end
   endgenerate
    generate
    if (debug==1) begin : debug_we
        always @ (posedge clk_a)
        if (we_a)
            $display ("Debug: Value %h written at address %h : time %t", d_a, adr_a, $time);
    end
    endgenerate
   always @ (posedge clk_a)
   if (we_a)
     ram[adr_a] <= d_a;
   always @ (posedge clk_b)
      q_b = ram[adr_b];
endmodule
module vl_dpram_2r1w ( d_a, q_a, adr_a, we_a, clk_a, q_b, adr_b, clk_b );
   parameter data_width = 32;
   parameter addr_width = 8;
   parameter mem_size = 1<<addr_width;
   input [(data_width-1):0]      d_a;
   input [(addr_width-1):0]       adr_a;
   input [(addr_width-1):0]       adr_b;
   input                         we_a;
   output [(data_width-1):0]      q_b;
   output reg [(data_width-1):0] q_a;
   input                         clk_a, clk_b;
   reg [(data_width-1):0]         q_b;
   reg [data_width-1:0] ram [0:mem_size-1] /*synthesis syn_ramstyle = "no_rw_check"*/;
    parameter memory_init = 0;
    parameter memory_file = "vl_ram.vmem";
    parameter debug = 0;
    generate
    if (memory_init == 1) begin : init_mem
        initial
            $readmemh(memory_file, ram);
    end else if (memory_init == 2) begin : init_zero
        integer k;
        initial
            for (k = 0; k < mem_size; k = k + 1)
                ram[k] = 0;
    end
   endgenerate
    generate
    if (debug==1) begin : debug_we
        always @ (posedge clk_a)
        if (we_a)
            $display ("Debug: Value %h written at address %h : time %t", d_a, adr_a, $time);
    end
    endgenerate
   always @ (posedge clk_a)
     begin
        q_a <= ram[adr_a];
        if (we_a)
             ram[adr_a] <= d_a;
     end
   always @ (posedge clk_b)
          q_b <= ram[adr_b];
endmodule
module vl_dpram_1r2w ( d_a, q_a, adr_a, we_a, clk_a, d_b, adr_b, we_b, clk_b );
   parameter data_width = 32;
   parameter addr_width = 8;
   parameter mem_size = 1<<addr_width;
   input [(data_width-1):0]      d_a;
   input [(addr_width-1):0]       adr_a;
   input [(addr_width-1):0]       adr_b;
   input                         we_a;
   input [(data_width-1):0]       d_b;
   output reg [(data_width-1):0] q_a;
   input                         we_b;
   input                         clk_a, clk_b;
   reg [(data_width-1):0]         q_b;
   reg [data_width-1:0] ram [0:mem_size-1] /*synthesis syn_ramstyle = "no_rw_check"*/;
    parameter memory_init = 0;
    parameter memory_file = "vl_ram.vmem";
    parameter debug = 0;
    generate
    if (memory_init == 1) begin : init_mem
        initial
            $readmemh(memory_file, ram);
    end else if (memory_init == 2) begin : init_zero
        integer k;
        initial
            for (k = 0; k < mem_size; k = k + 1)
                ram[k] = 0;
    end
   endgenerate
    generate
    if (debug==1) begin : debug_we
        always @ (posedge clk_a)
        if (we_a)
            $display ("Debug: Value %h written at address %h : time %t", d_a, adr_a, $time);
        always @ (posedge clk_b)
        if (we_b)
            $display ("Debug: Value %h written at address %h : time %t", d_b, adr_b, $time);
    end
    endgenerate
   always @ (posedge clk_a)
     begin
        q_a <= ram[adr_a];
        if (we_a)
             ram[adr_a] <= d_a;
     end
   always @ (posedge clk_b)
     begin
        if (we_b)
          ram[adr_b] <= d_b;
     end
endmodule
module vl_dpram_2r2w ( d_a, q_a, adr_a, we_a, clk_a, d_b, q_b, adr_b, we_b, clk_b );
   parameter data_width = 32;
   parameter addr_width = 8;
   parameter mem_size = 1<<addr_width;
   input [(data_width-1):0]      d_a;
   input [(addr_width-1):0]       adr_a;
   input [(addr_width-1):0]       adr_b;
   input                         we_a;
   output [(data_width-1):0]      q_b;
   input [(data_width-1):0]       d_b;
   output reg [(data_width-1):0] q_a;
   input                         we_b;
   input                         clk_a, clk_b;
   reg [(data_width-1):0]         q_b;
   reg [data_width-1:0] ram [0:mem_size-1] /*synthesis syn_ramstyle = "no_rw_check"*/;
    parameter memory_init = 0;
    parameter memory_file = "vl_ram.vmem";
    parameter debug = 0;
    generate
    if (memory_init) begin : init_mem
        initial
            $readmemh(memory_file, ram);
    end else if (memory_init == 2) begin : init_zero
        integer k;
        initial
            for (k = 0; k < mem_size; k = k + 1)
                ram[k] = 0;
    end
   endgenerate
    generate
    if (debug==1) begin : debug_we
        always @ (posedge clk_a)
        if (we_a)
            $display ("Debug: Value %h written at address %h : time %t", d_a, adr_a, $time);
        always @ (posedge clk_b)
        if (we_b)
            $display ("Debug: Value %h written at address %h : time %t", d_b, adr_b, $time);
    end
    endgenerate
   always @ (posedge clk_a)
     begin
        q_a <= ram[adr_a];
        if (we_a)
             ram[adr_a] <= d_a;
     end
   always @ (posedge clk_b)
     begin
        q_b <= ram[adr_b];
        if (we_b)
          ram[adr_b] <= d_b;
     end
endmodule
module vl_dpram_be_2r2w ( d_a, q_a, adr_a, be_a, we_a, clk_a, d_b, q_b, adr_b, be_b, we_b, clk_b );
   parameter a_data_width = 32;
   parameter a_addr_width = 8;
   parameter b_data_width = 64; //a_data_width;
   //localparam b_addr_width = a_data_width * a_addr_width / b_data_width;
   localparam b_addr_width =
        (a_data_width==b_data_width) ? a_addr_width :
        (a_data_width==b_data_width*2) ? a_addr_width+1 :
        (a_data_width==b_data_width*4) ? a_addr_width+2 :
        (a_data_width==b_data_width*8) ? a_addr_width+3 :
        (a_data_width==b_data_width*16) ? a_addr_width+4 :
        (a_data_width==b_data_width*32) ? a_addr_width+5 :
        (a_data_width==b_data_width/2) ? a_addr_width-1 :
        (a_data_width==b_data_width/4) ? a_addr_width-2 :
        (a_data_width==b_data_width/8) ? a_addr_width-3 :
        (a_data_width==b_data_width/16) ? a_addr_width-4 :
        (a_data_width==b_data_width/32) ? a_addr_width-5 : 0;
   localparam ratio = (a_addr_width>b_addr_width) ? (a_addr_width/b_addr_width) : (b_addr_width/a_addr_width);
   parameter mem_size = (a_addr_width>b_addr_width) ? (1<<b_addr_width) : (1<<a_addr_width);
   parameter memory_init = 0;
   parameter memory_file = "vl_ram.vmem";
   parameter debug = 0;
   input [(a_data_width-1):0]      d_a;
   input [(a_addr_width-1):0]       adr_a;
   input [(a_data_width/8-1):0]    be_a;
   input                           we_a;
   output reg [(a_data_width-1):0] q_a;
   input [(b_data_width-1):0]       d_b;
   input [(b_addr_width-1):0]       adr_b;
   input [(b_data_width/8-1):0]    be_b;
   input                           we_b;
   output reg [(b_data_width-1):0]          q_b;
   input                           clk_a, clk_b;
    generate
    if (debug==1) begin : debug_we
        always @ (posedge clk_a)
        if (we_a)
            $display ("Debug: Value %h written at address %h : time %t", d_a, adr_a, $time);
        always @ (posedge clk_b)
        if (we_b)
            $display ("Debug: Value %h written at address %h : time %t", d_b, adr_b, $time);
    end
    endgenerate
`ifdef SYSTEMVERILOG
// use a multi-dimensional packed array
//to model individual bytes within the word
generate
if (a_data_width==32 & b_data_width==32) begin : dpram_3232
    logic [0:3][7:0] ram [0:mem_size-1] /*synthesis syn_ramstyle = "no_rw_check"*/;
    initial
        if (memory_init==1)
            $readmemh(memory_file, ram);
    integer k;
    initial
        if (memory_init==2)
            for (k = 0; k < mem_size; k = k + 1)
                ram[k] = 0;
    always_ff@(posedge clk_a)
    begin
        if(we_a) begin
            if(be_a[3]) ram[adr_a][0] <= d_a[31:24];
            if(be_a[2]) ram[adr_a][1] <= d_a[23:16];
            if(be_a[1]) ram[adr_a][2] <= d_a[15:8];
            if(be_a[0]) ram[adr_a][3] <= d_a[7:0];
        end
    end
    always@(posedge clk_a)
        q_a = ram[adr_a];
    always_ff@(posedge clk_b)
    begin
        if(we_b) begin
            if(be_b[3]) ram[adr_b][0] <= d_b[31:24];
            if(be_b[2]) ram[adr_b][1] <= d_b[23:16];
            if(be_b[1]) ram[adr_b][2] <= d_b[15:8];
            if(be_b[0]) ram[adr_b][3] <= d_b[7:0];
        end
    end
    always@(posedge clk_b)
        q_b = ram[adr_b];
end
endgenerate
generate
if (a_data_width==64 & b_data_width==64) begin : dpram_6464
    logic [0:7][7:0] ram [0:mem_size-1] /*synthesis syn_ramstyle = "no_rw_check"*/;
    initial
        if (memory_init==1)
            $readmemh(memory_file, ram);
    integer k;
    initial
        if (memory_init==2)
            for (k = 0; k < mem_size; k = k + 1)
                ram[k] = 0;
    always_ff@(posedge clk_a)
    begin
        if(we_a) begin
            if(be_a[7]) ram[adr_a][7] <= d_a[63:56];
            if(be_a[6]) ram[adr_a][6] <= d_a[55:48];
            if(be_a[5]) ram[adr_a][5] <= d_a[47:40];
            if(be_a[4]) ram[adr_a][4] <= d_a[39:32];
            if(be_a[3]) ram[adr_a][3] <= d_a[31:24];
            if(be_a[2]) ram[adr_a][2] <= d_a[23:16];
            if(be_a[1]) ram[adr_a][1] <= d_a[15:8];
            if(be_a[0]) ram[adr_a][0] <= d_a[7:0];
        end
    end
    always@(posedge clk_a)
        q_a = ram[adr_a];
    always_ff@(posedge clk_b)
    begin
        if(we_b) begin
            if(be_b[7]) ram[adr_b][7] <= d_b[63:56];
            if(be_b[6]) ram[adr_b][6] <= d_b[55:48];
            if(be_b[5]) ram[adr_b][5] <= d_b[47:40];
            if(be_b[4]) ram[adr_b][4] <= d_b[39:32];
            if(be_b[3]) ram[adr_b][3] <= d_b[31:24];
            if(be_b[2]) ram[adr_b][2] <= d_b[23:16];
            if(be_b[1]) ram[adr_b][1] <= d_b[15:8];
            if(be_b[0]) ram[adr_b][0] <= d_b[7:0];
        end
    end
    always@(posedge clk_b)
        q_b = ram[adr_b];
end
endgenerate
generate
if (a_data_width==32 & b_data_width==16) begin : dpram_3216
logic [31:0] temp;
vl_dpram_be_2r2w # (.a_data_width(64), .b_data_width(64), .a_addr_width(a_addr_width), .mem_size(mem_size), .memory_init(memory_init), .memory_file(memory_file))
dpram6464 (
    .d_a(d_a),
    .q_a(q_a),
    .adr_a(adr_a),
    .be_a(be_a),
    .we_a(we_a),
    .clk_a(clk_a),
    .d_b({d_b,d_b}),
    .q_b(temp),
    .adr_b(adr_b),
    .be_b({be_b,be_b} & {{2{adr_b[0]}},{2{!adr_b[0]}}}),
    .we_b(we_b),
    .clk_b(clk_b)
);
always @ (adr_b[0] or temp)
    if (adr_b[0])
        q_b = temp[31:16];
    else
        q_b = temp[15:0];
end
endgenerate
generate
if (a_data_width==32 & b_data_width==64) begin : dpram_3264
logic [63:0] temp;
vl_dpram_be_2r2w # (.a_data_width(64), .b_data_width(64), .a_addr_width(a_addr_width), .mem_size(mem_size), .memory_init(memory_init), .memory_file(memory_file))
dpram6464 (
    .d_a({d_a,d_a}),
    .q_a(temp),
    .adr_a(adr_a[a_addr_width-1:1]),
    .be_a({be_a,be_a} & {{4{adr_a[0]}},{4{!adr_a[0]}}}),
    .we_a(we_a),
    .clk_a(clk_a),
    .d_b(d_b),
    .q_b(q_b),
    .adr_b(adr_b),
    .be_b(be_b),
    .we_b(we_b),
    .clk_b(clk_b)
);
always @ (adr_a[0] or temp)
    if (adr_a[0])
        q_a = temp[63:32];
    else
        q_a = temp[31:0];
end
endgenerate
`else
    // This modules requires SystemVerilog
    // at this point anyway
`endif
endmodule
// FIFO
module vl_fifo_1r1w_fill_level_sync (
    d, wr, fifo_full,
    q, rd, fifo_empty,
    fill_level,
    clk, rst
    );
parameter data_width = 18;
parameter addr_width = 4;
// write side
input  [data_width-1:0] d;
input                   wr;
output                  fifo_full;
// read side
output [data_width-1:0] q;
input                   rd;
output                  fifo_empty;
// common
output [addr_width:0]   fill_level;
input rst, clk;
wire [addr_width:1] wadr, radr;
vl_cnt_bin_ce
    # ( .length(addr_width))
    fifo_wr_adr( .cke(wr), .q(wadr), .rst(rst), .clk(clk));
vl_cnt_bin_ce
    # (.length(addr_width))
    fifo_rd_adr( .cke(rd), .q(radr), .rst(rst), .clk(clk));
vl_dpram_1r1w
    # (.data_width(data_width), .addr_width(addr_width))
    dpram ( .d_a(d), .adr_a(wadr), .we_a(wr), .clk_a(clk), .q_b(q), .adr_b(radr), .clk_b(clk));
vl_cnt_bin_ce_rew_q_zq_l1
    # (.length(addr_width+1), .level1_value(1<<addr_width))
    fill_level_cnt( .cke(rd ^ wr), .rew(rd), .q(fill_level), .zq(fifo_empty), .level1(fifo_full), .rst(rst), .clk(clk));
endmodule
// Intended use is two small FIFOs (RX and TX typically) in one FPGA RAM resource
// RAM is supposed to be larger than the two FIFOs
// LFSR counters used adr pointers
module vl_fifo_2r2w_sync_simplex (
    // a side
    a_d, a_wr, a_fifo_full,
    a_q, a_rd, a_fifo_empty,
    a_fill_level,
    // b side
    b_d, b_wr, b_fifo_full,
    b_q, b_rd, b_fifo_empty,
    b_fill_level,
    // common
    clk, rst
    );
parameter data_width = 8;
parameter addr_width = 5;
parameter fifo_full_level = (1<<addr_width)-1;
// a side
input  [data_width-1:0] a_d;
input                   a_wr;
output                  a_fifo_full;
output [data_width-1:0] a_q;
input                   a_rd;
output                  a_fifo_empty;
output [addr_width-1:0] a_fill_level;
// b side
input  [data_width-1:0] b_d;
input                   b_wr;
output                  b_fifo_full;
output [data_width-1:0] b_q;
input                   b_rd;
output                  b_fifo_empty;
output [addr_width-1:0] b_fill_level;
input                   clk;
input                   rst;
// adr_gen
wire [addr_width:1] a_wadr, a_radr;
wire [addr_width:1] b_wadr, b_radr;
// dpram
wire [addr_width:0] a_dpram_adr, b_dpram_adr;
vl_cnt_lfsr_ce
    # ( .length(addr_width))
    fifo_a_wr_adr( .cke(a_wr), .q(a_wadr), .rst(rst), .clk(clk));
vl_cnt_lfsr_ce
    # (.length(addr_width))
    fifo_a_rd_adr( .cke(a_rd), .q(a_radr), .rst(rst), .clk(clk));
vl_cnt_lfsr_ce
    # ( .length(addr_width))
    fifo_b_wr_adr( .cke(b_wr), .q(b_wadr), .rst(rst), .clk(clk));
vl_cnt_lfsr_ce
    # (.length(addr_width))
    fifo_b_rd_adr( .cke(b_rd), .q(b_radr), .rst(rst), .clk(clk));
// mux read or write adr to DPRAM
assign a_dpram_adr = (a_wr) ? {1'b0,a_wadr} : {1'b1,a_radr};
assign b_dpram_adr = (b_wr) ? {1'b1,b_wadr} : {1'b0,b_radr};
vl_dpram_2r2w
    # (.data_width(data_width), .addr_width(addr_width+1))
    dpram ( .d_a(a_d), .q_a(a_q), .adr_a(a_dpram_adr), .we_a(a_wr), .clk_a(a_clk),
            .d_b(b_d), .q_b(b_q), .adr_b(b_dpram_adr), .we_b(b_wr), .clk_b(b_clk));
vl_cnt_bin_ce_rew_zq_l1
    # (.length(addr_width), .level1_value(fifo_full_level))
    a_fill_level_cnt( .cke(a_rd ^ a_wr), .rew(a_rd), .q(a_fill_level), .zq(a_fifo_empty), .level1(a_fifo_full), .rst(rst), .clk(clk));
vl_cnt_bin_ce_rew_zq_l1
    # (.length(addr_width), .level1_value(fifo_full_level))
    b_fill_level_cnt( .cke(b_rd ^ b_wr), .rew(b_rd), .q(b_fill_level), .zq(b_fifo_empty), .level1(b_fifo_full), .rst(rst), .clk(clk));
endmodule
module vl_fifo_cmp_async ( wptr, rptr, fifo_empty, fifo_full, wclk, rclk, rst );
   parameter addr_width = 4;
   parameter N = addr_width-1;
   parameter Q1 = 2'b00;
   parameter Q2 = 2'b01;
   parameter Q3 = 2'b11;
   parameter Q4 = 2'b10;
   parameter going_empty = 1'b0;
   parameter going_full  = 1'b1;
   input [N:0]  wptr, rptr;
   output       fifo_empty;
   output       fifo_full;
   input        wclk, rclk, rst;
   wire direction;
   reg  direction_set, direction_clr;
   wire async_empty, async_full;
   wire fifo_full2;
   wire fifo_empty2;
   // direction_set
   always @ (wptr[N:N-1] or rptr[N:N-1])
     case ({wptr[N:N-1],rptr[N:N-1]})
       {Q1,Q2} : direction_set <= 1'b1;
       {Q2,Q3} : direction_set <= 1'b1;
       {Q3,Q4} : direction_set <= 1'b1;
       {Q4,Q1} : direction_set <= 1'b1;
       default : direction_set <= 1'b0;
     endcase
   // direction_clear
   always @ (wptr[N:N-1] or rptr[N:N-1] or rst)
     if (rst)
       direction_clr <= 1'b1;
     else
       case ({wptr[N:N-1],rptr[N:N-1]})
         {Q2,Q1} : direction_clr <= 1'b1;
         {Q3,Q2} : direction_clr <= 1'b1;
         {Q4,Q3} : direction_clr <= 1'b1;
         {Q1,Q4} : direction_clr <= 1'b1;
         default : direction_clr <= 1'b0;
       endcase
    vl_dff_sr dff_sr_dir( .aclr(direction_clr), .aset(direction_set), .clock(1'b1), .data(1'b1), .q(direction));
   assign async_empty = (wptr == rptr) && (direction==going_empty);
   assign async_full  = (wptr == rptr) && (direction==going_full);
    vl_dff_sr dff_sr_empty0( .aclr(rst), .aset(async_full), .clock(wclk), .data(async_full), .q(fifo_full2));
    vl_dff_sr dff_sr_empty1( .aclr(rst), .aset(async_full), .clock(wclk), .data(fifo_full2), .q(fifo_full));
/*
   always @ (posedge wclk or posedge rst or posedge async_full)
     if (rst)
       {fifo_full, fifo_full2} <= 2'b00;
     else if (async_full)
       {fifo_full, fifo_full2} <= 2'b11;
     else
       {fifo_full, fifo_full2} <= {fifo_full2, async_full};
*/
/*   always @ (posedge rclk or posedge async_empty)
     if (async_empty)
       {fifo_empty, fifo_empty2} <= 2'b11;
     else
       {fifo_empty,fifo_empty2} <= {fifo_empty2,async_empty}; */
    vl_dff # ( .reset_value(1'b1)) dff0 ( .d(async_empty), .q(fifo_empty2), .clk(rclk), .rst(async_empty));
    vl_dff # ( .reset_value(1'b1)) dff1 ( .d(fifo_empty2), .q(fifo_empty),  .clk(rclk), .rst(async_empty));
endmodule // async_compb
module vl_fifo_1r1w_async (
    d, wr, fifo_full, wr_clk, wr_rst,
    q, rd, fifo_empty, rd_clk, rd_rst
    );
parameter data_width = 18;
parameter addr_width = 4;
// write side
input  [data_width-1:0] d;
input                   wr;
output                  fifo_full;
input                   wr_clk;
input                   wr_rst;
// read side
output [data_width-1:0] q;
input                   rd;
output                  fifo_empty;
input                   rd_clk;
input                   rd_rst;
wire [addr_width:1] wadr, wadr_bin, radr, radr_bin;
vl_cnt_gray_ce_bin
    # ( .length(addr_width))
    fifo_wr_adr( .cke(wr), .q(wadr), .q_bin(wadr_bin), .rst(wr_rst), .clk(wr_clk));
vl_cnt_gray_ce_bin
    # (.length(addr_width))
    fifo_rd_adr( .cke(rd), .q(radr), .q_bin(radr_bin), .rst(rd_rst), .clk(rd_clk));
vl_dpram_1r1w
    # (.data_width(data_width), .addr_width(addr_width))
    dpram ( .d_a(d), .adr_a(wadr_bin), .we_a(wr), .clk_a(wr_clk), .q_b(q), .adr_b(radr_bin), .clk_b(rd_clk));
vl_fifo_cmp_async
    # (.addr_width(addr_width))
    cmp ( .wptr(wadr), .rptr(radr), .fifo_empty(fifo_empty), .fifo_full(fifo_full), .wclk(wr_clk), .rclk(rd_clk), .rst(wr_rst) );
endmodule
module vl_fifo_2r2w_async (
    // a side
    a_d, a_wr, a_fifo_full,
    a_q, a_rd, a_fifo_empty,
    a_clk, a_rst,
    // b side
    b_d, b_wr, b_fifo_full,
    b_q, b_rd, b_fifo_empty,
    b_clk, b_rst
    );
parameter data_width = 18;
parameter addr_width = 4;
// a side
input  [data_width-1:0] a_d;
input                   a_wr;
output                  a_fifo_full;
output [data_width-1:0] a_q;
input                   a_rd;
output                  a_fifo_empty;
input                   a_clk;
input                   a_rst;
// b side
input  [data_width-1:0] b_d;
input                   b_wr;
output                  b_fifo_full;
output [data_width-1:0] b_q;
input                   b_rd;
output                  b_fifo_empty;
input                   b_clk;
input                   b_rst;
vl_fifo_1r1w_async # (.data_width(data_width), .addr_width(addr_width))
vl_fifo_1r1w_async_a (
    .d(a_d), .wr(a_wr), .fifo_full(a_fifo_full), .wr_clk(a_clk), .wr_rst(a_rst),
    .q(b_q), .rd(b_rd), .fifo_empty(b_fifo_empty), .rd_clk(b_clk), .rd_rst(b_rst)
    );
vl_fifo_1r1w_async # (.data_width(data_width), .addr_width(addr_width))
vl_fifo_1r1w_async_b (
    .d(b_d), .wr(b_wr), .fifo_full(b_fifo_full), .wr_clk(b_clk), .wr_rst(b_rst),
    .q(a_q), .rd(a_rd), .fifo_empty(a_fifo_empty), .rd_clk(a_clk), .rd_rst(a_rst)
    );
endmodule
module vl_fifo_2r2w_async_simplex (
    // a side
    a_d, a_wr, a_fifo_full,
    a_q, a_rd, a_fifo_empty,
    a_clk, a_rst,
    // b side
    b_d, b_wr, b_fifo_full,
    b_q, b_rd, b_fifo_empty,
    b_clk, b_rst
    );
parameter data_width = 18;
parameter addr_width = 4;
// a side
input  [data_width-1:0] a_d;
input                   a_wr;
output                  a_fifo_full;
output [data_width-1:0] a_q;
input                   a_rd;
output                  a_fifo_empty;
input                   a_clk;
input                   a_rst;
// b side
input  [data_width-1:0] b_d;
input                   b_wr;
output                  b_fifo_full;
output [data_width-1:0] b_q;
input                   b_rd;
output                  b_fifo_empty;
input                   b_clk;
input                   b_rst;
// adr_gen
wire [addr_width:1] a_wadr, a_wadr_bin, a_radr, a_radr_bin;
wire [addr_width:1] b_wadr, b_wadr_bin, b_radr, b_radr_bin;
// dpram
wire [addr_width:0] a_dpram_adr, b_dpram_adr;
vl_cnt_gray_ce_bin
    # ( .length(addr_width))
    fifo_a_wr_adr( .cke(a_wr), .q(a_wadr), .q_bin(a_wadr_bin), .rst(a_rst), .clk(a_clk));
vl_cnt_gray_ce_bin
    # (.length(addr_width))
    fifo_a_rd_adr( .cke(a_rd), .q(a_radr), .q_bin(a_radr_bin), .rst(a_rst), .clk(a_clk));
vl_cnt_gray_ce_bin
    # ( .length(addr_width))
    fifo_b_wr_adr( .cke(b_wr), .q(b_wadr), .q_bin(b_wadr_bin), .rst(b_rst), .clk(b_clk));
vl_cnt_gray_ce_bin
    # (.length(addr_width))
    fifo_b_rd_adr( .cke(b_rd), .q(b_radr), .q_bin(b_radr_bin), .rst(b_rst), .clk(b_clk));
// mux read or write adr to DPRAM
assign a_dpram_adr = (a_wr) ? {1'b0,a_wadr_bin} : {1'b1,a_radr_bin};
assign b_dpram_adr = (b_wr) ? {1'b1,b_wadr_bin} : {1'b0,b_radr_bin};
vl_dpram_2r2w
    # (.data_width(data_width), .addr_width(addr_width+1))
    dpram ( .d_a(a_d), .q_a(a_q), .adr_a(a_dpram_adr), .we_a(a_wr), .clk_a(a_clk),
            .d_b(b_d), .q_b(b_q), .adr_b(b_dpram_adr), .we_b(b_wr), .clk_b(b_clk));
vl_fifo_cmp_async
    # (.addr_width(addr_width))
    cmp1 ( .wptr(a_wadr), .rptr(b_radr), .fifo_empty(b_fifo_empty), .fifo_full(a_fifo_full), .wclk(a_clk), .rclk(b_clk), .rst(a_rst) );
vl_fifo_cmp_async
    # (.addr_width(addr_width))
    cmp2 ( .wptr(b_wadr), .rptr(a_radr), .fifo_empty(a_fifo_empty), .fifo_full(b_fifo_full), .wclk(b_clk), .rclk(a_clk), .rst(b_rst) );
endmodule
module vl_reg_file (
    a1, a2, a3, wd3, we3, rd1, rd2, clk
);
parameter data_width = 32;
parameter addr_width = 5;
input [addr_width-1:0] a1, a2, a3;
input [data_width-1:0] wd3;
input we3;
output [data_width-1:0] rd1, rd2;
input clk;
reg [data_width-1:0] wd3_reg;
reg [addr_width-1:0] a1_reg, a2_reg, a3_reg;
reg we3_reg;
reg [data_width-1:0] ram1 [(1<<addr_width)-1:0] /*synthesis syn_ramstyle = "no_rw_check"*/;
reg [data_width-1:0] ram2 [(1<<addr_width)-1:0] /*synthesis syn_ramstyle = "no_rw_check"*/;
always @ (posedge clk or posedge rst)
if (rst)
    {wd3_reg, a3_reg, we3_reg} <= {(data_width+addr_width+1){1'b0}};
else
    {wd3_reg, a3_reg, we3_reg} <= {wd3,a3,wd3};
    always @ (negedge clk)
    if (we3_reg)
        ram1[a3_reg] <= wd3;
    always @ (posedge clk)
        a1_reg <= a1;
    assign rd1 = ram1[a1_reg];
    always @ (negedge clk)
    if (we3_reg)
        ram2[a3_reg] <= wd3;
    always @ (posedge clk)
        a2_reg <= a2;
    assign rd2 = ram2[a2_reg];
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Versatile library, wishbone stuff                           ////
////                                                              ////
////  Description                                                 ////
////  Wishbone compliant modules                                  ////
////                                                              ////
////                                                              ////
////  To Do:                                                      ////
////   -                                                          ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2010 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
`timescale 1ns/1ns
module vl_wb_adr_inc ( cyc_i, stb_i, cti_i, bte_i, adr_i, we_i, ack_o, adr_o, clk, rst);
parameter adr_width = 10;
parameter max_burst_width = 4;
input cyc_i, stb_i, we_i;
input [2:0] cti_i;
input [1:0] bte_i;
input [adr_width-1:0] adr_i;
output [adr_width-1:0] adr_o;
output ack_o;
input clk, rst;
reg [adr_width-1:0] adr;
wire [max_burst_width-1:0] to_adr;
reg [max_burst_width-1:0] last_adr;
reg last_cycle;
localparam idle_or_eoc = 1'b0;
localparam cyc_or_ws   = 1'b1;
always @ (posedge clk or posedge rst)
if (rst)
    last_adr <= {max_burst_width{1'b0}};
else
    if (stb_i)
        last_adr <=adr_o[max_burst_width-1:0];
generate
if (max_burst_width==0) begin : inst_0
        reg ack_o;
        assign adr_o = adr_i;
        always @ (posedge clk or posedge rst)
        if (rst)
            ack_o <= 1'b0;
        else
            ack_o <= cyc_i & stb_i & !ack_o;
end else begin
    always @ (posedge clk or posedge rst)
    if (rst)
        last_cycle <= idle_or_eoc;
    else
        last_cycle <= (!cyc_i) ? idle_or_eoc : //idle
                      (cyc_i & ack_o & (cti_i==3'b000 | cti_i==3'b111)) ? idle_or_eoc : // eoc
                      (cyc_i & !stb_i) ? cyc_or_ws : //ws
                      cyc_or_ws; // cyc
    assign to_adr = (last_cycle==idle_or_eoc) ? adr_i[max_burst_width-1:0] : adr[max_burst_width-1:0];
    assign adr_o[max_burst_width-1:0] = (we_i) ? adr_i[max_burst_width-1:0] :
                                        (!stb_i) ? last_adr :
                                        (last_cycle==idle_or_eoc) ? adr_i[max_burst_width-1:0] :
                                        adr[max_burst_width-1:0];
    assign ack_o = (last_cycle==cyc_or_ws) & stb_i;
end
endgenerate
generate
if (max_burst_width==2) begin : inst_2
    always @ (posedge clk or posedge rst)
    if (rst)
        adr <= 2'h0;
    else
        if (cyc_i & stb_i)
            adr[1:0] <= to_adr[1:0] + 2'd1;
        else
            adr <= to_adr[1:0];
end
endgenerate
generate
if (max_burst_width==3) begin : inst_3
    always @ (posedge clk or posedge rst)
    if (rst)
        adr <= 3'h0;
    else
        if (cyc_i & stb_i)
            case (bte_i)
            2'b01: adr[2:0] <= {to_adr[2],to_adr[1:0] + 2'd1};
            default: adr[3:0] <= to_adr[2:0] + 3'd1;
            endcase
        else
            adr <= to_adr[2:0];
end
endgenerate
generate
if (max_burst_width==4) begin : inst_4
    always @ (posedge clk or posedge rst)
    if (rst)
        adr <= 4'h0;
    else
        if (stb_i) // | (!stb_i & last_cycle!=ws)) // for !stb_i restart with adr_i +1, only inc once
            case (bte_i)
            2'b01: adr[3:0] <= {to_adr[3:2],to_adr[1:0] + 2'd1};
            2'b10: adr[3:0] <= {to_adr[3],to_adr[2:0] + 3'd1};
            default: adr[3:0] <= to_adr + 4'd1;
            endcase
        else
            adr <= to_adr[3:0];
end
endgenerate
generate
if (adr_width > max_burst_width) begin : pass_through
    assign adr_o[adr_width-1:max_burst_width] = adr_i[adr_width-1:max_burst_width];
end
endgenerate
endmodule
// async wb3 - wb3 bridge
`timescale 1ns/1ns
module vl_wb3wb3_bridge (
        // wishbone slave side
        wbs_dat_i, wbs_adr_i, wbs_sel_i, wbs_bte_i, wbs_cti_i, wbs_we_i, wbs_cyc_i, wbs_stb_i, wbs_dat_o, wbs_ack_o, wbs_clk, wbs_rst,
        // wishbone master side
        wbm_dat_o, wbm_adr_o, wbm_sel_o, wbm_bte_o, wbm_cti_o, wbm_we_o, wbm_cyc_o, wbm_stb_o, wbm_dat_i, wbm_ack_i, wbm_clk, wbm_rst);
parameter style = "FIFO"; // valid: simple, FIFO
parameter addr_width = 4;
input [31:0] wbs_dat_i;
input [31:2] wbs_adr_i;
input [3:0]  wbs_sel_i;
input [1:0]  wbs_bte_i;
input [2:0]  wbs_cti_i;
input wbs_we_i, wbs_cyc_i, wbs_stb_i;
output [31:0] wbs_dat_o;
output wbs_ack_o;
input wbs_clk, wbs_rst;
output [31:0] wbm_dat_o;
output reg [31:2] wbm_adr_o;
output [3:0]  wbm_sel_o;
output reg [1:0]  wbm_bte_o;
output reg [2:0]  wbm_cti_o;
output reg wbm_we_o;
output wbm_cyc_o;
output wbm_stb_o;
input [31:0]  wbm_dat_i;
input wbm_ack_i;
input wbm_clk, wbm_rst;
// bte
parameter linear       = 2'b00;
parameter wrap4        = 2'b01;
parameter wrap8        = 2'b10;
parameter wrap16       = 2'b11;
// cti
parameter classic      = 3'b000;
parameter incburst     = 3'b010;
parameter endofburst   = 3'b111;
localparam wbs_adr  = 1'b0;
localparam wbs_data = 1'b1;
localparam wbm_adr0      = 2'b00;
localparam wbm_adr1      = 2'b01;
localparam wbm_data      = 2'b10;
localparam wbm_data_wait = 2'b11;
reg [1:0] wbs_bte_reg;
reg wbs;
wire wbs_eoc_alert, wbm_eoc_alert;
reg wbs_eoc, wbm_eoc;
reg [1:0] wbm;
wire [1:16] wbs_count, wbm_count;
wire [35:0] a_d, a_q, b_d, b_q;
wire a_wr, a_rd, a_fifo_full, a_fifo_empty, b_wr, b_rd, b_fifo_full, b_fifo_empty;
reg a_rd_reg;
wire b_rd_adr, b_rd_data;
wire b_rd_data_reg;
wire [35:0] temp;
assign wbs_eoc_alert = (wbs_bte_reg==wrap4 & wbs_count[3]) | (wbs_bte_reg==wrap8 & wbs_count[7]) | (wbs_bte_reg==wrap16 & wbs_count[15]);
always @ (posedge wbs_clk or posedge wbs_rst)
if (wbs_rst)
        wbs_eoc <= 1'b0;
else
        if (wbs==wbs_adr & wbs_stb_i & !a_fifo_full)
                wbs_eoc <= (wbs_bte_i==linear) | (wbs_cti_i==3'b111);
        else if (wbs_eoc_alert & (a_rd | a_wr))
                wbs_eoc <= 1'b1;
vl_cnt_shreg_ce_clear # ( .length(16))
    cnt0 (
        .cke(wbs_ack_o),
        .clear(wbs_eoc),
        .q(wbs_count),
        .rst(wbs_rst),
        .clk(wbs_clk));
always @ (posedge wbs_clk or posedge wbs_rst)
if (wbs_rst)
        wbs <= wbs_adr;
else
        if ((wbs==wbs_adr) & wbs_cyc_i & wbs_stb_i & a_fifo_empty)
                wbs <= wbs_data;
        else if (wbs_eoc & wbs_ack_o)
                wbs <= wbs_adr;
// wbs FIFO
assign a_d = (wbs==wbs_adr) ? {wbs_adr_i[31:2],wbs_we_i,((wbs_cti_i==3'b111) ? {2'b00,3'b000} : {wbs_bte_i,wbs_cti_i})} : {wbs_dat_i,wbs_sel_i};
assign a_wr = (wbs==wbs_adr)  ? wbs_cyc_i & wbs_stb_i & a_fifo_empty :
              (wbs==wbs_data) ? wbs_we_i  & wbs_stb_i & !a_fifo_full :
              1'b0;
assign a_rd = !a_fifo_empty;
always @ (posedge wbs_clk or posedge wbs_rst)
if (wbs_rst)
        a_rd_reg <= 1'b0;
else
        a_rd_reg <= a_rd;
assign wbs_ack_o = a_rd_reg | (a_wr & wbs==wbs_data);
assign wbs_dat_o = a_q[35:4];
always @ (posedge wbs_clk or posedge wbs_rst)
if (wbs_rst)
        wbs_bte_reg <= 2'b00;
else
        wbs_bte_reg <= wbs_bte_i;
// wbm FIFO
assign wbm_eoc_alert = (wbm_bte_o==wrap4 & wbm_count[3]) | (wbm_bte_o==wrap8 & wbm_count[7]) | (wbm_bte_o==wrap16 & wbm_count[15]);
always @ (posedge wbm_clk or posedge wbm_rst)
if (wbm_rst)
        wbm_eoc <= 1'b0;
else
        if (wbm==wbm_adr0 & !b_fifo_empty)
                wbm_eoc <= b_q[4:3] == linear;
        else if (wbm_eoc_alert & wbm_ack_i)
                wbm_eoc <= 1'b1;
always @ (posedge wbm_clk or posedge wbm_rst)
if (wbm_rst)
        wbm <= wbm_adr0;
else
/*
    if ((wbm==wbm_adr0 & !b_fifo_empty) |
        (wbm==wbm_adr1 & !b_fifo_empty & wbm_we_o) |
        (wbm==wbm_adr1 & !wbm_we_o) |
        (wbm==wbm_data & wbm_ack_i & wbm_eoc))
        wbm <= {wbm[0],!(wbm[1] ^ wbm[0])};  // count sequence 00,01,10
*/
    case (wbm)
    wbm_adr0:
        if (!b_fifo_empty)
            wbm <= wbm_adr1;
    wbm_adr1:
        if (!wbm_we_o | (!b_fifo_empty & wbm_we_o))
            wbm <= wbm_data;
    wbm_data:
        if (wbm_ack_i & wbm_eoc)
            wbm <= wbm_adr0;
        else if (b_fifo_empty & wbm_we_o & wbm_ack_i)
            wbm <= wbm_data_wait;
    wbm_data_wait:
        if (!b_fifo_empty)
            wbm <= wbm_data;
    endcase
assign b_d = {wbm_dat_i,4'b1111};
assign b_wr = !wbm_we_o & wbm_ack_i;
assign b_rd_adr  = (wbm==wbm_adr0 & !b_fifo_empty);
assign b_rd_data = (wbm==wbm_adr1 & !b_fifo_empty & wbm_we_o) ? 1'b1 : // b_q[`WE]
                   (wbm==wbm_data & !b_fifo_empty & wbm_we_o & wbm_ack_i & !wbm_eoc) ? 1'b1 :
                   (wbm==wbm_data_wait & !b_fifo_empty) ? 1'b1 :
                   1'b0;
assign b_rd = b_rd_adr | b_rd_data;
vl_dff dff1 ( .d(b_rd_data), .q(b_rd_data_reg), .clk(wbm_clk), .rst(wbm_rst));
vl_dff_ce # ( .width(36)) dff2 ( .d(b_q), .ce(b_rd_data_reg), .q(temp), .clk(wbm_clk), .rst(wbm_rst));
assign {wbm_dat_o,wbm_sel_o} = (b_rd_data_reg) ? b_q : temp;
vl_cnt_shreg_ce_clear # ( .length(16))
    cnt1 (
        .cke(wbm_ack_i),
        .clear(wbm_eoc),
        .q(wbm_count),
        .rst(wbm_rst),
        .clk(wbm_clk));
assign wbm_cyc_o = (wbm==wbm_data | wbm==wbm_data_wait);
assign wbm_stb_o = (wbm==wbm_data);
always @ (posedge wbm_clk or posedge wbm_rst)
if (wbm_rst)
        {wbm_adr_o,wbm_we_o,wbm_bte_o,wbm_cti_o} <= {30'h0,1'b0,linear,classic};
else begin
        if (wbm==wbm_adr0 & !b_fifo_empty)
                {wbm_adr_o,wbm_we_o,wbm_bte_o,wbm_cti_o} <= b_q;
        else if (wbm_eoc_alert & wbm_ack_i)
                wbm_cti_o <= endofburst;
end
//async_fifo_dw_simplex_top
vl_fifo_2r2w_async_simplex
# ( .data_width(36), .addr_width(addr_width))
fifo (
    // a side
    .a_d(a_d),
    .a_wr(a_wr),
    .a_fifo_full(a_fifo_full),
    .a_q(a_q),
    .a_rd(a_rd),
    .a_fifo_empty(a_fifo_empty),
    .a_clk(wbs_clk),
    .a_rst(wbs_rst),
    // b side
    .b_d(b_d),
    .b_wr(b_wr),
    .b_fifo_full(b_fifo_full),
    .b_q(b_q),
    .b_rd(b_rd),
    .b_fifo_empty(b_fifo_empty),
    .b_clk(wbm_clk),
    .b_rst(wbm_rst)
    );
endmodule
module vl_wb3avalon_bridge (
        // wishbone slave side
        wbs_dat_i, wbs_adr_i, wbs_sel_i, wbs_bte_i, wbs_cti_i, wbs_we_i, wbs_cyc_i, wbs_stb_i, wbs_dat_o, wbs_ack_o, wbs_clk, wbs_rst,
        // avalon master side
        readdata, readdatavalid, address, read, be, write, burstcount, writedata, waitrequest, beginbursttransfer, clk, rst);
parameter linewrapburst = 1'b0;
input [31:0] wbs_dat_i;
input [31:2] wbs_adr_i;
input [3:0]  wbs_sel_i;
input [1:0]  wbs_bte_i;
input [2:0]  wbs_cti_i;
input wbs_we_i;
input wbs_cyc_i;
input wbs_stb_i;
output [31:0] wbs_dat_o;
output wbs_ack_o;
input wbs_clk, wbs_rst;
input [31:0] readdata;
output [31:0] writedata;
output [31:2] address;
output [3:0]  be;
output write;
output read;
output beginbursttransfer;
output [3:0] burstcount;
input readdatavalid;
input waitrequest;
input clk;
input rst;
wire [1:0] wbm_bte_o;
wire [2:0] wbm_cti_o;
wire wbm_we_o, wbm_cyc_o, wbm_stb_o, wbm_ack_i;
reg last_cyc;
reg [3:0] counter;
reg read_busy;
always @ (posedge clk or posedge rst)
if (rst)
    last_cyc <= 1'b0;
else
    last_cyc <= wbm_cyc_o;
always @ (posedge clk or posedge rst)
if (rst)
    read_busy <= 1'b0;
else
    if (read & !waitrequest)
        read_busy <= 1'b1;
    else if (wbm_ack_i & wbm_cti_o!=3'b010)
        read_busy <= 1'b0;
assign read = wbm_cyc_o & wbm_stb_o & !wbm_we_o & !read_busy;
assign beginbursttransfer = (!last_cyc & wbm_cyc_o) & wbm_cti_o==3'b010;
assign burstcount = (wbm_bte_o==2'b01) ? 4'd4 :
                    (wbm_bte_o==2'b10) ? 4'd8 :
                    (wbm_bte_o==2'b11) ? 4'd16:
                    4'd1;
assign wbm_ack_i = (readdatavalid) | (write & !waitrequest);
always @ (posedge clk or posedge rst)
if (rst) begin
    counter <= 4'd0;
end else
    if (wbm_we_o) begin
        if (!waitrequest & !last_cyc & wbm_cyc_o) begin
            counter <= burstcount -4'd1;
        end else if (waitrequest & !last_cyc & wbm_cyc_o) begin
            counter <= burstcount;
        end else if (!waitrequest & wbm_stb_o) begin
            counter <= counter - 4'd1;
        end
    end
assign write = wbm_cyc_o & wbm_stb_o & wbm_we_o & counter!=4'd0;
vl_wb3wb3_bridge wbwb3inst (
    // wishbone slave side
    .wbs_dat_i(wbs_dat_i),
    .wbs_adr_i(wbs_adr_i),
    .wbs_sel_i(wbs_sel_i),
    .wbs_bte_i(wbs_bte_i),
    .wbs_cti_i(wbs_cti_i),
    .wbs_we_i(wbs_we_i),
    .wbs_cyc_i(wbs_cyc_i),
    .wbs_stb_i(wbs_stb_i),
    .wbs_dat_o(wbs_dat_o),
    .wbs_ack_o(wbs_ack_o),
    .wbs_clk(wbs_clk),
    .wbs_rst(wbs_rst),
    // wishbone master side
    .wbm_dat_o(writedata),
    .wbm_adr_o(address),
    .wbm_sel_o(be),
    .wbm_bte_o(wbm_bte_o),
    .wbm_cti_o(wbm_cti_o),
    .wbm_we_o(wbm_we_o),
    .wbm_cyc_o(wbm_cyc_o),
    .wbm_stb_o(wbm_stb_o),
    .wbm_dat_i(readdata),
    .wbm_ack_i(wbm_ack_i),
    .wbm_clk(clk),
    .wbm_rst(rst));
endmodule
// WB RAM with byte enable
module vl_wb_ram (
    wbs_dat_i, wbs_adr_i, wbs_cti_i, wbs_bte_i, wbs_sel_i, wbs_we_i, wbs_stb_i, wbs_cyc_i,
    wbs_dat_o, wbs_ack_o, wbs_stall_o, wb_clk, wb_rst);
parameter adr_width = 16;
parameter mem_size = 1<<adr_width;
parameter dat_width = 32;
parameter max_burst_width = 4; // only used for B3
parameter mode = "B3"; // valid options: B3, B4
parameter memory_init = 1;
parameter memory_file = "vl_ram.vmem";
input [dat_width-1:0] wbs_dat_i;
input [adr_width-1:0] wbs_adr_i;
input [2:0] wbs_cti_i;
input [1:0] wbs_bte_i;
input [dat_width/8-1:0] wbs_sel_i;
input wbs_we_i, wbs_stb_i, wbs_cyc_i;
output [dat_width-1:0] wbs_dat_o;
output wbs_ack_o;
output wbs_stall_o;
input wb_clk, wb_rst;
wire [adr_width-1:0] adr;
wire we;
generate
if (mode=="B3") begin : B3_inst
vl_wb_adr_inc # ( .adr_width(adr_width), .max_burst_width(max_burst_width)) adr_inc0 (
    .cyc_i(wbs_cyc_i),
    .stb_i(wbs_stb_i),
    .cti_i(wbs_cti_i),
    .bte_i(wbs_bte_i),
    .adr_i(wbs_adr_i),
    .we_i(wbs_we_i),
    .ack_o(wbs_ack_o),
    .adr_o(adr),
    .clk(wb_clk),
    .rst(wb_rst));
assign we = wbs_we_i & wbs_ack_o;
end else if (mode=="B4") begin : B4_inst
reg wbs_ack_o_reg;
always @ (posedge wb_clk or posedge wb_rst)
    if (wb_rst)
        wbs_ack_o_reg <= 1'b0;
    else
        wbs_ack_o_reg <= wbs_stb_i & wbs_cyc_i;
assign wbs_ack_o = wbs_ack_o_reg;
assign wbs_stall_o = 1'b0;
assign adr = wbs_adr_i;
assign we = wbs_we_i & wbs_cyc_i & wbs_stb_i;
end
endgenerate
vl_ram_be # (
    .data_width(dat_width),
    .addr_width(adr_width),
    .mem_size(mem_size),
    .memory_init(memory_init),
    .memory_file(memory_file))
ram0(
    .d(wbs_dat_i),
    .adr(adr),
    .be(wbs_sel_i),
    .we(we),
    .q(wbs_dat_o),
    .clk(wb_clk)
);
endmodule
// A wishbone compliant RAM module that can be placed in front of other memory controllers
module vl_wb_shadow_ram (
    wbs_dat_i, wbs_adr_i, wbs_cti_i, wbs_bte_i, wbs_sel_i, wbs_we_i, wbs_stb_i, wbs_cyc_i,
    wbs_dat_o, wbs_ack_o, wbs_stall_o,
    wbm_dat_o, wbm_adr_o, wbm_cti_o, wbm_bte_o, wbm_sel_o, wbm_we_o, wbm_stb_o, wbm_cyc_o,
    wbm_dat_i, wbm_ack_i, wbm_stall_i,
    wb_clk, wb_rst);
parameter dat_width = 32;
parameter mode = "B4";
parameter max_burst_width = 4; // only used for B3
parameter shadow_mem_adr_width = 10;
parameter shadow_mem_size = 1024;
parameter shadow_mem_init = 2;
parameter shadow_mem_file = "vl_ram.v";
parameter main_mem_adr_width = 24;
input [dat_width-1:0] wbs_dat_i;
input [main_mem_adr_width-1:0] wbs_adr_i;
input [2:0] wbs_cti_i;
input [1:0] wbs_bte_i;
input [dat_width/8-1:0] wbs_sel_i;
input wbs_we_i, wbs_stb_i, wbs_cyc_i;
output [dat_width-1:0] wbs_dat_o;
output wbs_ack_o;
output wbs_stall_o;
output [dat_width-1:0] wbm_dat_o;
output [main_mem_adr_width-1:0] wbm_adr_o;
output [2:0] wbm_cti_o;
output [1:0] wbm_bte_o;
output [dat_width/8-1:0] wbm_sel_o;
output wbm_we_o, wbm_stb_o, wbm_cyc_o;
input [dat_width-1:0] wbm_dat_i;
input wbm_ack_i, wbm_stall_i;
input wb_clk, wb_rst;
generate
if (shadow_mem_size>0) begin : shadow_ram_inst
wire cyc;
wire [dat_width-1:0] dat;
wire stall, ack;
assign cyc = wbs_cyc_i & (wbs_adr_i<=shadow_mem_size);
vl_wb_ram # (
    .dat_width(dat_width),
    .adr_width(shadow_mem_adr_width),
    .mem_size(shadow_mem_size),
    .memory_init(shadow_mem_init),
    .memory_file(shadow_mem_file),
    .mode(mode))
shadow_mem0 (
    .wbs_dat_i(wbs_dat_i),
    .wbs_adr_i(wbs_adr_i[shadow_mem_adr_width-1:0]),
    .wbs_sel_i(wbs_sel_i),
    .wbs_we_i (wbs_we_i),
    .wbs_bte_i(wbs_bte_i),
    .wbs_cti_i(wbs_cti_i),
    .wbs_stb_i(wbs_stb_i),
    .wbs_cyc_i(cyc),
    .wbs_dat_o(dat),
    .wbs_stall_o(stall),
    .wbs_ack_o(ack),
    .wb_clk(wb_clk),
    .wb_rst(wb_rst));
assign {wbm_dat_o, wbm_adr_o, wbm_cti_o, wbm_bte_o, wbm_sel_o, wbm_we_o, wbm_stb_o} =
       {wbs_dat_i, wbs_adr_i, wbs_cti_i, wbs_bte_i, wbs_sel_i, wbs_we_i, wbs_stb_i};
assign wbm_cyc_o = wbs_cyc_i & (wbs_adr_i>shadow_mem_size);
assign wbs_dat_o = (dat & {dat_width{cyc}}) | (wbm_dat_i & {dat_width{wbm_cyc_o}});
assign wbs_ack_o = (ack & cyc) | (wbm_ack_i & wbm_cyc_o);
assign wbs_stall_o = (stall & cyc) | (wbm_stall_i & wbm_cyc_o);
end else begin : no_shadow_ram_inst
assign {wbm_dat_o, wbm_adr_o, wbm_cti_o, wbm_bte_o, wbm_sel_o, wbm_we_o, wbm_stb_o, wbm_cyc_o} =
       {wbs_dat_i, wbs_adr_i, wbs_cti_i, wbs_bte_i, wbs_sel_i, wbs_we_i, wbs_stb_i, wbs_cyc_i};
assign {wbs_dat_o, wbs_ack_o, wbs_stall_o} = {wbm_dat_i, wbm_ack_i, wbm_stall_i};
end
endgenerate
endmodule
// WB ROM
module vl_wb_b4_rom (
    wb_adr_i, wb_stb_i, wb_cyc_i,
    wb_dat_o, stall_o, wb_ack_o, wb_clk, wb_rst);
    parameter dat_width = 32;
    parameter dat_default = 32'h15000000;
    parameter adr_width = 32;
/*
`ifndef ROM
`define ROM "rom.v"
`endif
*/
    input [adr_width-1:2]   wb_adr_i;
    input                   wb_stb_i;
    input                   wb_cyc_i;
    output [dat_width-1:0]  wb_dat_o;
    reg [dat_width-1:0]     wb_dat_o;
    output                  wb_ack_o;
    reg                     wb_ack_o;
    output                  stall_o;
    input                   wb_clk;
    input                   wb_rst;
always @ (posedge wb_clk or posedge wb_rst)
    if (wb_rst)
        wb_dat_o <= {dat_width{1'b0}};
    else
         case (wb_adr_i[adr_width-1:2])
`ifdef ROM
`include `ROM
`endif
           default:
             wb_dat_o <= dat_default;
         endcase // case (wb_adr_i)
always @ (posedge wb_clk or posedge wb_rst)
    if (wb_rst)
        wb_ack_o <= 1'b0;
    else
        wb_ack_o <= wb_stb_i & wb_cyc_i;
assign stall_o = 1'b0;
endmodule
// WB ROM
module vl_wb_boot_rom (
    wb_adr_i, wb_stb_i, wb_cyc_i,
    wb_dat_o, wb_ack_o, hit_o, wb_clk, wb_rst);
    parameter adr_hi = 31;
    parameter adr_lo = 28;
    parameter adr_sel = 4'hf;
    parameter addr_width = 5;
/*
`ifndef BOOT_ROM
`define BOOT_ROM "boot_rom.v"
`endif
*/
    input [adr_hi:2]    wb_adr_i;
    input               wb_stb_i;
    input               wb_cyc_i;
    output [31:0]        wb_dat_o;
    output              wb_ack_o;
    output              hit_o;
    input               wb_clk;
    input               wb_rst;
    wire hit;
    reg [31:0] wb_dat;
    reg wb_ack;
assign hit = wb_adr_i[adr_hi:adr_lo] == adr_sel;
always @ (posedge wb_clk or posedge wb_rst)
    if (wb_rst)
        wb_dat <= 32'h15000000;
    else
         case (wb_adr_i[addr_width-1:2])
`ifdef BOOT_ROM
`include `BOOT_ROM
`endif
           /*
            // Zero r0 and jump to 0x00000100
 
            1 : wb_dat <= 32'hA8200000;
            2 : wb_dat <= 32'hA8C00100;
            3 : wb_dat <= 32'h44003000;
            4 : wb_dat <= 32'h15000000;
            */
           default:
             wb_dat <= 32'h00000000;
         endcase // case (wb_adr_i)
always @ (posedge wb_clk or posedge wb_rst)
    if (wb_rst)
        wb_ack <= 1'b0;
    else
        wb_ack <= wb_stb_i & wb_cyc_i & hit & !wb_ack;
assign hit_o = hit;
assign wb_dat_o = wb_dat & {32{wb_ack}};
assign wb_ack_o = wb_ack;
endmodule
module vl_wb_dpram (
        // wishbone slave side a
        wbsa_dat_i, wbsa_adr_i, wbsa_sel_i, wbsa_cti_i, wbsa_bte_i, wbsa_we_i, wbsa_cyc_i, wbsa_stb_i, wbsa_dat_o, wbsa_ack_o, wbsa_stall_o,
        wbsa_clk, wbsa_rst,
        // wishbone slave side b
        wbsb_dat_i, wbsb_adr_i, wbsb_sel_i, wbsb_cti_i, wbsb_bte_i, wbsb_we_i, wbsb_cyc_i, wbsb_stb_i, wbsb_dat_o, wbsb_ack_o, wbsb_stall_o,
        wbsb_clk, wbsb_rst);
parameter data_width_a = 32;
parameter data_width_b = data_width_a;
parameter addr_width_a = 8;
localparam addr_width_b = data_width_a * addr_width_a / data_width_b;
parameter mem_size = (addr_width_a>addr_width_b) ? (1<<addr_width_a) : (1<<addr_width_b);
parameter max_burst_width_a = 4;
parameter max_burst_width_b = max_burst_width_a;
parameter mode = "B3";
parameter memory_init = 0;
parameter memory_file = "vl_ram.v";
input [data_width_a-1:0] wbsa_dat_i;
input [addr_width_a-1:0] wbsa_adr_i;
input [data_width_a/8-1:0] wbsa_sel_i;
input [2:0] wbsa_cti_i;
input [1:0] wbsa_bte_i;
input wbsa_we_i, wbsa_cyc_i, wbsa_stb_i;
output [data_width_a-1:0] wbsa_dat_o;
output wbsa_ack_o;
output wbsa_stall_o;
input wbsa_clk, wbsa_rst;
input [data_width_b-1:0] wbsb_dat_i;
input [addr_width_b-1:0] wbsb_adr_i;
input [data_width_b/8-1:0] wbsb_sel_i;
input [2:0] wbsb_cti_i;
input [1:0] wbsb_bte_i;
input wbsb_we_i, wbsb_cyc_i, wbsb_stb_i;
output [data_width_b-1:0] wbsb_dat_o;
output wbsb_ack_o;
output wbsb_stall_o;
input wbsb_clk, wbsb_rst;
wire [addr_width_a-1:0] adr_a;
wire [addr_width_b-1:0] adr_b;
wire we_a, we_b;
generate
if (mode=="B3") begin : b3_inst
vl_wb_adr_inc # ( .adr_width(addr_width_a), .max_burst_width(max_burst_width_a)) adr_inc0 (
    .cyc_i(wbsa_cyc_i),
    .stb_i(wbsa_stb_i),
    .cti_i(wbsa_cti_i),
    .bte_i(wbsa_bte_i),
    .adr_i(wbsa_adr_i),
    .we_i(wbsa_we_i),
    .ack_o(wbsa_ack_o),
    .adr_o(adr_a),
    .clk(wbsa_clk),
    .rst(wbsa_rst));
assign we_a = wbsa_we_i & wbsa_ack_o;
vl_wb_adr_inc # ( .adr_width(addr_width_b), .max_burst_width(max_burst_width_b)) adr_inc1 (
    .cyc_i(wbsb_cyc_i),
    .stb_i(wbsb_stb_i),
    .cti_i(wbsb_cti_i),
    .bte_i(wbsb_bte_i),
    .adr_i(wbsb_adr_i),
    .we_i(wbsb_we_i),
    .ack_o(wbsb_ack_o),
    .adr_o(adr_b),
    .clk(wbsb_clk),
    .rst(wbsb_rst));
assign we_b = wbsb_we_i & wbsb_ack_o;
end else if (mode=="B4") begin : b4_inst
vl_dff dffacka ( .d(wbsa_stb_i & wbsa_cyc_i), .q(wbsa_ack_o), .clk(wbsa_clk), .rst(wbsa_rst));
assign wbsa_stall_o = 1'b0;
assign we_a = wbsa_we_i & wbsa_cyc_i & wbsa_stb_i;
vl_dff dffackb ( .d(wbsb_stb_i & wbsb_cyc_i), .q(wbsb_ack_o), .clk(wbsb_clk), .rst(wbsb_rst));
assign wbsb_stall_o = 1'b0;
assign we_b = wbsb_we_i & wbsb_cyc_i & wbsb_stb_i;
end
endgenerate
vl_dpram_be_2r2w # ( .a_data_width(data_width_a), .a_addr_width(addr_width_a), .mem_size(mem_size),
                 .b_data_width(data_width_b),
                 .memory_init(memory_init), .memory_file(memory_file))
ram_i (
    .d_a(wbsa_dat_i),
    .q_a(wbsa_dat_o),
    .adr_a(adr_a),
    .be_a(wbsa_sel_i),
    .we_a(we_a),
    .clk_a(wbsa_clk),
    .d_b(wbsb_dat_i),
    .q_b(wbsb_dat_o),
    .adr_b(adr_b),
    .be_b(wbsb_sel_i),
    .we_b(we_b),
    .clk_b(wbsb_clk) );
endmodule
module vl_wb_cache (
    wbs_dat_i, wbs_adr_i, wbs_sel_i, wbs_cti_i, wbs_bte_i, wbs_we_i, wbs_stb_i, wbs_cyc_i, wbs_dat_o, wbs_ack_o, wbs_stall_o, wbs_clk, wbs_rst,
    wbm_dat_o, wbm_adr_o, wbm_sel_o, wbm_cti_o, wbm_bte_o, wbm_we_o, wbm_stb_o, wbm_cyc_o, wbm_dat_i, wbm_ack_i, wbm_stall_i, wbm_clk, wbm_rst
);
parameter dw_s = 32;
parameter aw_s = 24;
parameter dw_m = dw_s;
//localparam aw_m = dw_s * aw_s / dw_m;
localparam aw_m =
        (dw_s==dw_m) ? aw_s :
        (dw_s==dw_m*2) ? aw_s+1 :
        (dw_s==dw_m*4) ? aw_s+2 :
        (dw_s==dw_m*8) ? aw_s+3 :
        (dw_s==dw_m*16) ? aw_s+4 :
        (dw_s==dw_m*32) ? aw_s+5 :
        (dw_s==dw_m/2) ? aw_s-1 :
        (dw_s==dw_m/4) ? aw_s-2 :
        (dw_s==dw_m/8) ? aw_s-3 :
        (dw_s==dw_m/16) ? aw_s-4 :
        (dw_s==dw_m/32) ? aw_s-5 : 0;
parameter wbs_max_burst_width = 4;
parameter wbs_mode = "B3";
parameter async = 1; // wbs_clk != wbm_clk
parameter nr_of_ways = 1;
parameter aw_offset = 4; // 4 => 16 words per cache line
parameter aw_slot = 10;
parameter valid_mem = 0;
parameter debug = 0;
localparam aw_b_offset = aw_offset * dw_s / dw_m;
localparam aw_tag = aw_s - aw_slot - aw_offset;
parameter wbm_burst_size = 4; // valid options 4,8,16
localparam bte = (wbm_burst_size==4) ? 2'b01 : (wbm_burst_size==8) ? 2'b10 : 2'b11;
localparam wbm_burst_width = (wbm_burst_size==1) ? 0 : (wbm_burst_size==2) ? 1 : (wbm_burst_size==4) ? 2 : (wbm_burst_size==8) ? 3 : (wbm_burst_size==16) ? 4 : (wbm_burst_size==32) ? 5 : (wbm_burst_size==64) ? 6 : (wbm_burst_size==128) ? 7 : 8;
localparam nr_of_wbm_burst = ((1<<aw_offset)/wbm_burst_size) * dw_s / dw_m;
localparam nr_of_wbm_burst_width = (nr_of_wbm_burst==1) ? 0 : (nr_of_wbm_burst==2) ? 1 : (nr_of_wbm_burst==4) ? 2 : (nr_of_wbm_burst==8) ? 3 : (nr_of_wbm_burst==16) ? 4 : (nr_of_wbm_burst==32) ? 5 : (nr_of_wbm_burst==64) ? 6 : (nr_of_wbm_burst==128) ? 7 : 8;
input [dw_s-1:0] wbs_dat_i;
input [aw_s-1:0] wbs_adr_i; // dont include a1,a0
input [dw_s/8-1:0] wbs_sel_i;
input [2:0] wbs_cti_i;
input [1:0] wbs_bte_i;
input wbs_we_i, wbs_stb_i, wbs_cyc_i;
output [dw_s-1:0] wbs_dat_o;
output wbs_ack_o;
output wbs_stall_o;
input wbs_clk, wbs_rst;
output [dw_m-1:0] wbm_dat_o;
output [aw_m-1:0] wbm_adr_o;
output [dw_m/8-1:0] wbm_sel_o;
output [2:0] wbm_cti_o;
output [1:0] wbm_bte_o;
output wbm_stb_o, wbm_cyc_o, wbm_we_o;
input [dw_m-1:0] wbm_dat_i;
input wbm_ack_i;
input wbm_stall_i;
input wbm_clk, wbm_rst;
wire valid, dirty, hit;
wire [aw_tag-1:0] tag;
wire tag_mem_we;
wire [aw_tag-1:0] wbs_adr_tag;
wire [aw_slot-1:0] wbs_adr_slot;
wire [aw_offset-1:0] wbs_adr_word;
wire [aw_s-1:0] wbs_adr;
reg [1:0] state;
localparam idle = 2'h0;
localparam rdwr = 2'h1;
localparam push = 2'h2;
localparam pull = 2'h3;
wire eoc;
wire we;
// cdc
wire done, mem_alert, mem_done;
// wbm side
reg [aw_m-1:0] wbm_radr;
reg [aw_m-1:0] wbm_wadr;
wire [aw_slot-1:0] wbm_adr;
wire wbm_radr_cke, wbm_wadr_cke;
reg [2:0] phase;
// phase = {we,stb,cyc}
localparam wbm_wait     = 3'b000;
localparam wbm_wr       = 3'b111;
localparam wbm_wr_drain = 3'b101;
localparam wbm_rd       = 3'b011;
localparam wbm_rd_drain = 3'b001;
assign {wbs_adr_tag, wbs_adr_slot, wbs_adr_word} = wbs_adr_i;
generate
if (valid_mem==0) begin : no_valid_mem
assign valid = 1'b1;
end else begin : valid_mem_inst
vl_dpram_1r1w
    # ( .data_width(1), .addr_width(aw_slot), .memory_init(2), .debug(debug))
    valid_mem ( .d_a(1'b1), .adr_a(wbs_adr_slot), .we_a(mem_done), .clk_a(wbm_clk),
                .q_b(valid), .adr_b(wbs_adr_slot), .clk_b(wbs_clk));
end
endgenerate
vl_dpram_1r1w
    # ( .data_width(aw_tag), .addr_width(aw_slot), .memory_init(2), .debug(debug))
    tag_mem ( .d_a(wbs_adr_tag), .adr_a(wbs_adr_slot), .we_a(mem_done), .clk_a(wbm_clk),
              .q_b(tag), .adr_b(wbs_adr_slot), .clk_b(wbs_clk));
assign hit = wbs_adr_tag == tag;
vl_dpram_1r2w
    # ( .data_width(1), .addr_width(aw_slot), .memory_init(2), .debug(debug))
    dirty_mem (
        .d_a(1'b1), .q_a(dirty), .adr_a(wbs_adr_slot), .we_a(wbs_cyc_i & wbs_we_i & wbs_ack_o), .clk_a(wbs_clk),
        .d_b(1'b0), .adr_b(wbs_adr_slot), .we_b(mem_done), .clk_b(wbm_clk));
generate
if (wbs_mode=="B3") begin : inst_b3
vl_wb_adr_inc # ( .adr_width(aw_s), .max_burst_width(wbs_max_burst_width)) adr_inc0 (
    .cyc_i(wbs_cyc_i & (state==rdwr) & hit & valid),
    .stb_i(wbs_stb_i & (state==rdwr) & hit & valid), // throttle depending on valid
    .cti_i(wbs_cti_i),
    .bte_i(wbs_bte_i),
    .adr_i(wbs_adr_i),
    .we_i (wbs_we_i),
    .ack_o(wbs_ack_o),
    .adr_o(wbs_adr),
    .clk(wbs_clk),
    .rst(wbs_rst));
assign eoc = (wbs_cti_i==3'b000 | wbs_cti_i==3'b111) & wbs_ack_o;
assign we = wbs_cyc_i &  wbs_we_i & wbs_ack_o;
end else if (wbs_mode=="B4") begin : inst_b4
end
endgenerate
vl_dpram_be_2r2w
    # ( .a_data_width(dw_s), .a_addr_width(aw_slot+aw_offset), .b_data_width(dw_m), .debug(debug))
    cache_mem ( .d_a(wbs_dat_i), .adr_a(wbs_adr[aw_slot+aw_offset-1:0]),   .be_a(wbs_sel_i), .we_a(we), .q_a(wbs_dat_o), .clk_a(wbs_clk),
                .d_b(wbm_dat_i), .adr_b(wbm_adr_o[aw_slot+aw_offset-1:0]), .be_b(wbm_sel_o), .we_b(wbm_cyc_o & !wbm_we_o & wbs_ack_i), .q_b(wbm_dat_o), .clk_b(wbm_clk));
always @ (posedge wbs_clk or posedge wbs_rst)
if (wbs_rst)
    state <= idle;
else
    case (state)
    idle:
        if (wbs_cyc_i)
            state <= rdwr;
    rdwr:
        casex ({valid, hit, dirty, eoc})
        4'b0xxx: state <= pull;
        4'b11x1: state <= idle;
        4'b101x: state <= push;
        4'b100x: state <= pull;
        endcase
    push:
        if (done)
            state <= rdwr;
    pull:
        if (done)
            state <= rdwr;
    default: state <= idle;
    endcase
// cdc
generate
if (async==1) begin : cdc0
vl_cdc cdc0 ( .start_pl(state==rdwr & (!valid | !hit)), .take_it_pl(mem_alert), .take_it_grant_pl(mem_done), .got_it_pl(done), .clk_src(wbs_clk), .rst_src(wbs_rst), .clk_dst(wbm_clk), .rst_dst(wbm_rst));
end
else begin : nocdc
    assign mem_alert = state==rdwr & (!valid | !hit);
    assign done = mem_done;
end
endgenerate
// FSM generating a number of burts 4 cycles
// actual number depends on data width ratio
// nr_of_wbm_burst
reg [nr_of_wbm_burst_width+wbm_burst_width-1:0]       cnt_rw, cnt_ack;
always @ (posedge wbm_clk or posedge wbm_rst)
if (wbm_rst)
    cnt_rw <= {wbm_burst_width{1'b0}};
else
    if (wbm_cyc_o & wbm_stb_o & !wbm_stall_i)
        cnt_rw <= cnt_rw + 1;
always @ (posedge wbm_clk or posedge wbm_rst)
if (wbm_rst)
    cnt_ack <= {wbm_burst_width{1'b0}};
else
    if (wbm_ack_i)
        cnt_ack <= cnt_ack + 1;
generate
if (nr_of_wbm_burst==1) begin : one_burst
always @ (posedge wbm_clk or posedge wbm_rst)
if (wbm_rst)
    phase <= wbm_wait;
else
    case (phase)
    wbm_wait:
        if (mem_alert)
            if (state==push)
                phase <= wbm_wr;
            else
                phase <= wbm_rd;
    wbm_wr:
        if (&cnt_rw)
            phase <= wbm_wr_drain;
    wbm_wr_drain:
        if (&cnt_ack)
            phase <= wbm_rd;
    wbm_rd:
        if (&cnt_rw)
            phase <= wbm_rd_drain;
    wbm_rd_drain:
        if (&cnt_ack)
            phase <= wbm_wait;
    default: phase <= wbm_wait;
    endcase
end else begin : multiple_burst
always @ (posedge wbm_clk or posedge wbm_rst)
if (wbm_rst)
    phase <= wbm_wait;
else
    case (phase)
    wbm_wait:
        if (mem_alert)
            if (state==push)
                phase <= wbm_wr;
            else
                phase <= wbm_rd;
    wbm_wr:
        if (&cnt_rw[wbm_burst_width-1:0])
            phase <= wbm_wr_drain;
    wbm_wr_drain:
        if (&cnt_ack)
            phase <= wbm_rd;
        else if (&cnt_ack[wbm_burst_width-1:0])
            phase <= wbm_wr;
    wbm_rd:
        if (&cnt_rw[wbm_burst_width-1:0])
            phase <= wbm_rd_drain;
    wbm_rd_drain:
        if (&cnt_ack)
            phase <= wbm_wait;
        else if (&cnt_ack[wbm_burst_width-1:0])
            phase <= wbm_rd;
    default: phase <= wbm_wait;
    endcase
end
endgenerate
assign mem_done = phase==wbm_rd_drain & (&cnt_ack) & wbm_ack_i;
assign wbm_adr_o = (phase[2]) ? {tag, wbs_adr_slot, cnt_rw} : {wbs_adr_tag, wbs_adr_slot, cnt_rw};
assign wbm_adr   = (phase[2]) ? {wbs_adr_slot, cnt_rw} : {wbs_adr_slot, cnt_rw};
assign wbm_sel_o = {dw_m/8{1'b1}};
assign wbm_cti_o = (&cnt_rw | !wbm_stb_o) ? 3'b111 : 3'b010;
assign wbm_bte_o = bte;
assign {wbm_we_o, wbm_stb_o, wbm_cyc_o}  = phase;
endmodule
// Wishbone to avalon bridge supporting one type of burst transfer only
// intended use is together with cache above
// WB B4 -> pipelined avalon
module vl_wb_avalon_bridge (
        // wishbone slave side
        wbs_dat_i, wbs_adr_i, wbs_sel_i, wbs_bte_i, wbs_cti_i, wbs_we_i, wbs_cyc_i, wbs_stb_i, wbs_dat_o, wbs_ack_o, wbs_stall_o,
        // avalon master side
        readdata, readdatavalid, address, read, be, write, burstcount, writedata, waitrequest, beginbursttransfer,
        // common
        clk, rst);
parameter adr_width = 30;
parameter dat_width = 32;
parameter burst_size = 4;
input [dat_width-1:0] wbs_dat_i;
input [adr_width-1:0] wbs_adr_i;
input [dat_width/8-1:0]  wbs_sel_i;
input [1:0]  wbs_bte_i;
input [2:0]  wbs_cti_i;
input wbs_we_i;
input wbs_cyc_i;
input wbs_stb_i;
output [dat_width:0] wbs_dat_o;
output wbs_ack_o;
output wbs_stall_o;
input [dat_width-1:0] readdata;
input readdatavalid;
output [dat_width-1:0] writedata;
output [adr_width-1:0] address;
output [dat_width/8-1:0]  be;
output write;
output read;
output beginbursttransfer;
output [3:0] burstcount;
input waitrequest;
input clk, rst;
reg last_cyc_idle_or_eoc;
reg [3:0] cnt;
always @ (posedge clk or posedge rst)
if (rst)
    cnt <= 4'h0;
else
    if (beginbursttransfer & waitrequest)
        cnt <= burst_size - 1;
    else if (beginbursttransfer & !waitrequest)
        cnt <= burst_size - 2;
    else if (wbs_ack_o)
        cnt <= cnt - 1;
reg wr_ack;
always @ (posedge clk or posedge rst)
if (rst)
    wr_ack <= 1'b0;
else
    wr_ack <=  (wbs_we_i & wbs_cyc_i & wbs_stb_i & !wbs_stall_o);
// to avalon
assign writedata = wbs_dat_i;
assign address = wbs_adr_i;
assign be = wbs_sel_i;
assign write = cnt==(burst_size-1) & wbs_cyc_i &  wbs_we_i;
assign read  = cnt==(burst_size-1) & wbs_cyc_i & !wbs_we_i;
assign beginbursttransfer = cnt==4'h0 & wbs_cyc_i;
assign burstcount = burst_size;
// to wishbone
assign wbs_dat_o = readdata;
assign wbs_ack_o = wr_ack | readdatavalid;
assign wbs_stall_o = waitrequest;
endmodule
module vl_wb_avalon_mem_cache (
    wbs_dat_i, wbs_adr_i, wbs_sel_i, wbs_cti_i, wbs_bte_i, wbs_we_i, wbs_stb_i, wbs_cyc_i, wbs_dat_o, wbs_ack_o, wbs_stall_o, wbs_clk, wbs_rst,
    readdata, readdatavalid, address, read, be, write, burstcount, writedata, waitrequest, beginbursttransfer, clk, rst
);
// wishbone
parameter wb_dat_width = 32;
parameter wb_adr_width = 22;
parameter wb_max_burst_width = 4;
parameter wb_mode = "B4";
// avalon
parameter avalon_dat_width = 32;
//localparam avalon_adr_width = wb_dat_width * wb_adr_width / avalon_dat_width;
localparam avalon_adr_width =
        (wb_dat_width==avalon_dat_width) ? wb_adr_width :
        (wb_dat_width==avalon_dat_width*2) ? wb_adr_width+1 :
        (wb_dat_width==avalon_dat_width*4) ? wb_adr_width+2 :
        (wb_dat_width==avalon_dat_width*8) ? wb_adr_width+3 :
        (wb_dat_width==avalon_dat_width*16) ? wb_adr_width+4 :
        (wb_dat_width==avalon_dat_width*32) ? wb_adr_width+5 :
        (wb_dat_width==avalon_dat_width/2) ? wb_adr_width-1 :
        (wb_dat_width==avalon_dat_width/4) ? wb_adr_width-2 :
        (wb_dat_width==avalon_dat_width/8) ? wb_adr_width-3 :
        (wb_dat_width==avalon_dat_width/16) ? wb_adr_width-4 :
        (wb_dat_width==avalon_dat_width/32) ? wb_adr_width-5 : 0;
parameter avalon_burst_size = 4;
// cache
parameter async = 1;
parameter nr_of_ways = 1;
parameter aw_offset = 4;
parameter aw_slot = 10;
parameter valid_mem = 1;
// shadow RAM
parameter shadow_ram = 0;
parameter shadow_ram_adr_width = 10;
parameter shadow_ram_size = 1024;
parameter shadow_ram_init = 2; // 0: no init, 1: from file, 2: with zero
parameter shadow_ram_file = "vl_ram.v";
input [wb_dat_width-1:0] wbs_dat_i;
input [wb_adr_width-1:0] wbs_adr_i; // dont include a1,a0
input [wb_dat_width/8-1:0] wbs_sel_i;
input [2:0] wbs_cti_i;
input [1:0] wbs_bte_i;
input wbs_we_i, wbs_stb_i, wbs_cyc_i;
output [wb_dat_width-1:0] wbs_dat_o;
output wbs_ack_o;
output wbs_stall_o;
input wbs_clk, wbs_rst;
input [avalon_dat_width-1:0] readdata;
input readdatavalid;
output [avalon_dat_width-1:0] writedata;
output [avalon_adr_width-1:0] address;
output [avalon_dat_width/8-1:0]  be;
output write;
output read;
output beginbursttransfer;
output [3:0] burstcount;
input waitrequest;
input clk, rst;
wire [wb_dat_width-1:0] wb1_dat_o;
wire [wb_adr_width-1:0] wb1_adr_o;
wire [wb_dat_width/8-1:0] wb1_sel_o;
wire [2:0] wb1_cti_o;
wire [1:0] wb1_bte_o;
wire wb1_we_o;
wire wb1_stb_o;
wire wb1_cyc_o;
wire wb1_stall_i;
wire [wb_dat_width-1:0] wb1_dat_i;
wire wb1_ack_i;
wire [wb_dat_width-1:0] wb2_dat_o;
wire [wb_adr_width-1:0] wb2_adr_o;
wire [wb_dat_width/8-1:0] wb2_sel_o;
wire [2:0] wb2_cti_o;
wire [1:0] wb2_bte_o;
wire wb2_we_o;
wire wb2_stb_o;
wire wb2_cyc_o;
wire wb2_stall_i;
wire [wb_dat_width-1:0] wb2_dat_i;
wire wb2_ack_i;
vl_wb_shadow_ram # ( .dat_width(wb_dat_width), .mode(wb_mode), .max_burst_width(wb_max_burst_width),
                 .shadow_mem_adr_width(shadow_ram_adr_width), .shadow_mem_size(shadow_ram_size), .shadow_mem_init(shadow_ram_init), .shadow_mem_file(shadow_ram_file),
                 .main_mem_adr_width(wb_adr_width))
shadow_ram0 (
    .wbs_dat_i(wbs_dat_i), .wbs_adr_i(wbs_adr_i), .wbs_cti_i(wbs_cti_i), .wbs_bte_i(wbs_bte_i), .wbs_sel_i(wbs_sel_i), .wbs_we_i(wbs_we_i), .wbs_stb_i(wbs_stb_i), .wbs_cyc_i(wbs_cyc_i),
    .wbs_dat_o(wbs_dat_o), .wbs_ack_o(wbs_ack_o), .wbs_stall_o(wbs_stall_o),
    .wbm_dat_o(wb1_dat_o), .wbm_adr_o(wb1_adr_o), .wbm_cti_o(wb1_cti_o), .wbm_bte_o(wb1_bte_o), .wbm_sel_o(wb1_sel_o), .wbm_we_o(wb1_we_o), .wbm_stb_o(wb1_stb_o), .wbm_cyc_o(wb1_cyc_o),
    .wbm_dat_i(wb1_dat_i), .wbm_ack_i(wb1_ack_i), .wbm_stall_i(wb1_stall_i),
    .wb_clk(wbs_clk), .wb_rst(wbs_rst));
vl_wb_cache
# ( .dw_s(wb_dat_width), .aw_s(wb_adr_width), .dw_m(avalon_dat_width), .wbs_mode(wb_mode), .wbs_max_burst_width(wb_max_burst_width), .async(async), .nr_of_ways(nr_of_ways), .aw_offset(aw_offset), .aw_slot(aw_slot), .valid_mem(valid_mem))
cache0 (
    .wbs_dat_i(wb1_dat_o), .wbs_adr_i(wb1_adr_o), .wbs_sel_i(wb1_sel_o), .wbs_cti_i(wb1_cti_o), .wbs_bte_i(wb1_bte_o), .wbs_we_i(wb1_we_o), .wbs_stb_i(wb1_stb_o), .wbs_cyc_i(wb1_cyc_o),
    .wbs_dat_o(wb1_dat_i), .wbs_ack_o(wb1_ack_i), .wbs_stall_o(wb1_stall_i), .wbs_clk(wbs_clk), .wbs_rst(wbs_rst),
    .wbm_dat_o(wb2_dat_o), .wbm_adr_o(wb2_adr_o), .wbm_sel_o(wb2_sel_o), .wbm_cti_o(wb2_cti_o), .wbm_bte_o(wb2_bte_o), .wbm_we_o(wb2_we_o), .wbm_stb_o(wb2_stb_o), .wbm_cyc_o(wb2_cyc_o),
    .wbm_dat_i(wb2_dat_i), .wbm_ack_i(wb2_ack_i), .wbm_stall_i(wb2_stall_i), .wbm_clk(clk), .wbm_rst(rst));
vl_wb_avalon_bridge # ( .adr_width(avalon_adr_width), .dat_width(avalon_dat_width), .burst_size(avalon_burst_size))
bridge0 (
        // wishbone slave side
        .wbs_dat_i(wb2_dat_o), .wbs_adr_i(wb2_adr_o), .wbs_sel_i(wb2_sel_o), .wbs_bte_i(wb2_bte_o), .wbs_cti_i(wb2_cti_o), .wbs_we_i(wb2_we_o), .wbs_cyc_i(wb2_cyc_o), .wbs_stb_i(wb2_stb_o),
        .wbs_dat_o(wb2_dat_i), .wbs_ack_o(wb2_ack_i), .wbs_stall_o(wb2_stall_i),
        // avalon master side
        .readdata(readdata), .readdatavalid(readdatavalid), .address(address), .read(read), .be(be), .write(write), .burstcount(burstcount), .writedata(writedata), .waitrequest(waitrequest), .beginbursttransfer(beginbursttransfer),
        // common
        .clk(clk), .rst(rst));
endmodule
//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Arithmetic functions                                        ////
////                                                              ////
////  Description                                                 ////
////  Arithmetic functions for ALU and DSP                        ////
////                                                              ////
////                                                              ////
////  To Do:                                                      ////
////   -                                                          ////
////                                                              ////
////  Author(s):                                                  ////
////      - Michael Unneback, unneback@opencores.org              ////
////        ORSoC AB                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2010 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
// signed multiplication
module vl_mults (a,b,p);
parameter operand_a_width = 18;
parameter operand_b_width = 18;
parameter result_hi = 35;
parameter result_lo = 0;
input [operand_a_width-1:0] a;
input [operand_b_width-1:0] b;
output [result_hi:result_lo] p;
wire signed [operand_a_width-1:0] ai;
wire signed [operand_b_width-1:0] bi;
wire signed [operand_a_width+operand_b_width-1:0] result;
    assign ai = a;
    assign bi = b;
    assign result = ai * bi;
    assign p = result[result_hi:result_lo];
endmodule
module vl_mults18x18 (a,b,p);
input [17:0] a,b;
output [35:0] p;
vl_mult
    # (.operand_a_width(18), .operand_b_width(18))
    mult0 (.a(a), .b(b), .p(p));
endmodule
// unsigned multiplication
module vl_mult (a,b,p);
parameter operand_a_width = 18;
parameter operand_b_width = 18;
parameter result_hi = 35;
parameter result_lo = 0;
input [operand_a_width-1:0] a;
input [operand_b_width-1:0] b;
output [result_hi:result_hi] p;
wire [operand_a_width+operand_b_width-1:0] result;
    assign result = a * b;
    assign p = result[result_hi:result_lo];
endmodule
// shift unit
// supporting the following shift functions
//   SLL
//   SRL
//   SRA
module vl_shift_unit_32( din, s, dout, opcode);
input [31:0] din; // data in operand
input [4:0] s; // shift operand
input [1:0] opcode;
output [31:0] dout;
parameter opcode_sll = 2'b00;
//parameter opcode_srl = 2'b01;
parameter opcode_sra = 2'b10;
//parameter opcode_ror = 2'b11;
wire sll, sra;
assign sll = opcode == opcode_sll;
assign sra = opcode == opcode_sra;
wire [15:1] s1;
wire [3:0] sign;
wire [7:0] tmp [0:3];
// first stage is multiplier based
// shift operand as fractional 8.7
assign s1[15] = sll & s[2:0]==3'd7;
assign s1[14] = sll & s[2:0]==3'd6;
assign s1[13] = sll & s[2:0]==3'd5;
assign s1[12] = sll & s[2:0]==3'd4;
assign s1[11] = sll & s[2:0]==3'd3;
assign s1[10] = sll & s[2:0]==3'd2;
assign s1[ 9] = sll & s[2:0]==3'd1;
assign s1[ 8] = s[2:0]==3'd0;
assign s1[ 7] = !sll & s[2:0]==3'd1;
assign s1[ 6] = !sll & s[2:0]==3'd2;
assign s1[ 5] = !sll & s[2:0]==3'd3;
assign s1[ 4] = !sll & s[2:0]==3'd4;
assign s1[ 3] = !sll & s[2:0]==3'd5;
assign s1[ 2] = !sll & s[2:0]==3'd6;
assign s1[ 1] = !sll & s[2:0]==3'd7;
assign sign[3] = din[31] & sra;
assign sign[2] = sign[3] & (&din[31:24]);
assign sign[1] = sign[2] & (&din[23:16]);
assign sign[0] = sign[1] & (&din[15:8]);
vl_mults # ( .operand_a_width(25), .operand_b_width(16), .result_hi(14), .result_lo(7)) mult_byte3 ( .a({sign[3], {8{sign[3]}},din[31:24], din[23:16]}), .b({1'b0,s1}), .p(tmp[3]));
vl_mults # ( .operand_a_width(25), .operand_b_width(16), .result_hi(14), .result_lo(7)) mult_byte2 ( .a({sign[2], din[31:24]  ,din[23:16],  din[15:8]}), .b({1'b0,s1}), .p(tmp[2]));
vl_mults # ( .operand_a_width(25), .operand_b_width(16), .result_hi(14), .result_lo(7)) mult_byte1 ( .a({sign[1], din[23:16]  ,din[15:8],   din[7:0]}), .b({1'b0,s1}), .p(tmp[1]));
vl_mults # ( .operand_a_width(25), .operand_b_width(16), .result_hi(14), .result_lo(7)) mult_byte0 ( .a({sign[0], din[15:8]   ,din[7:0],    8'h00}),      .b({1'b0,s1}), .p(tmp[0]));
// second stage is multiplexer based
// shift on byte level
// mux byte 3
assign dout[31:24] = (s[4:3]==2'b00) ? tmp[3] :
                     (sll & s[4:3]==2'b01) ? tmp[2] :
                     (sll & s[4:3]==2'b10) ? tmp[1] :
                     (sll & s[4:3]==2'b11) ? tmp[0] :
                     {8{sign[3]}};
// mux byte 2
assign dout[23:16] = (s[4:3]==2'b00) ? tmp[2] :
                     (sll & s[4:3]==2'b01) ? tmp[1] :
                     (sll & s[4:3]==2'b10) ? tmp[0] :
                     (sll & s[4:3]==2'b11) ? {8{1'b0}} :
                     (s[4:3]==2'b01) ? tmp[3] :
                     {8{sign[3]}};
// mux byte 1
assign dout[15:8]  = (s[4:3]==2'b00) ? tmp[1] :
                     (sll & s[4:3]==2'b01) ? tmp[0] :
                     (sll & s[4:3]==2'b10) ? {8{1'b0}} :
                     (sll & s[4:3]==2'b11) ? {8{1'b0}} :
                     (s[4:3]==2'b01) ? tmp[2] :
                     (s[4:3]==2'b10) ? tmp[3] :
                     {8{sign[3]}};
// mux byte 0
assign dout[7:0]   = (s[4:3]==2'b00) ? tmp[0] :
                     (sll) ?  {8{1'b0}}:
                     (s[4:3]==2'b01) ? tmp[1] :
                     (s[4:3]==2'b10) ? tmp[2] :
                     tmp[3];
endmodule
// logic unit
// supporting the following logic functions
//    a and b
//    a or  b
//    a xor b
//    not b
module vl_logic_unit( a, b, result, opcode);
parameter width = 32;
parameter opcode_and = 2'b00;
parameter opcode_or  = 2'b01;
parameter opcode_xor = 2'b10;
input [width-1:0] a,b;
output [width-1:0] result;
input [1:0] opcode;
assign result = (opcode==opcode_and) ? a & b :
                (opcode==opcode_or)  ? a | b :
                (opcode==opcode_xor) ? a ^ b :
                b;
endmodule

Line No.	Rev	Author	Line
1	60	unneback	`// default SYN_KEEP definition`
2	98	unneback	`// ACTEL FPGA should not use logic to handle rw collision`
3	97	unneback	`// size to width`
4	6	unneback	`//////////////////////////////////////////////////////////////////////`
5			`//// ////`
6			`//// Versatile library, clock and reset ////`
7			`//// ////`
8			`//// Description ////`
9			`//// Logic related to clock and reset ////`
10			`//// ////`
11			`//// ////`
12			`//// To Do: ////`
13			`//// - add more different registers ////`
14			`//// ////`
15			`//// Author(s): ////`
16			`//// - Michael Unneback, unneback@opencores.org ////`
17			`//// ORSoC AB ////`
18			`//// ////`
19			`//////////////////////////////////////////////////////////////////////`
20			`//// ////`
21			`//// Copyright (C) 2010 Authors and OPENCORES.ORG ////`
22			`//// ////`
23			`//// This source file may be used and distributed without ////`
24			`//// restriction provided that this copyright statement is not ////`
25			`//// removed from the file and that any derivative work contains ////`
26			`//// the original copyright notice and the associated disclaimer. ////`
27			`//// ////`
28			`//// This source file is free software; you can redistribute it ////`
29			`//// and/or modify it under the terms of the GNU Lesser General ////`
30			`//// Public License as published by the Free Software Foundation; ////`
31			`//// either version 2.1 of the License, or (at your option) any ////`
32			`//// later version. ////`
33			`//// ////`
34			`//// This source is distributed in the hope that it will be ////`
35			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
36			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
37			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
38			`//// details. ////`
39			`//// ////`
40			`//// You should have received a copy of the GNU Lesser General ////`
41			`//// Public License along with this source; if not, download it ////`
42			`//// from http://www.opencores.org/lgpl.shtml ////`
43			`//// ////`
44			`//////////////////////////////////////////////////////////////////////`
45	48	unneback	`timescale 1 ns/100 ps
46	6	unneback	`// Global buffer`
47			`// usage:`
48			`// use to enable global buffers for high fan out signals such as clock and reset`
49			`// Version: 8.4 8.4.0.33`
50			`module gbuf(GL,CLK);`
51			`output GL;`
52			`input CLK;`
53			`wire GND;`
54			`GND GND_1_net(.Y(GND));`
55			`CLKDLY Inst1(.CLK(CLK), .GL(GL), .DLYGL0(GND), .DLYGL1(GND),`
56			`.DLYGL2(GND), .DLYGL3(GND), .DLYGL4(GND)) /* synthesis black_box */;`
57			`endmodule`
58			`timescale 1 ns/1 ns
59			`module vl_gbuf ( i, o);`
60			`input i;`
61			`output o;`
62			`ifdef SIM_GBUF
63			`assign o=i;`
64			`else
65			`gbuf gbuf_i0 ( .CLK(i), .GL(o));`
66			`endif
67			`endmodule`
68			`//ACTEL`
69			`// sync reset`
70	17	unneback	`// input active lo async reset, normally from external reset generator and/or switch`
71	6	unneback	`// output active high global reset sync with two DFFs`
72			`timescale 1 ns/100 ps
73			`module vl_sync_rst ( rst_n_i, rst_o, clk);`
74			`input rst_n_i, clk;`
75			`output rst_o;`
76	18	unneback	`reg [1:0] tmp;`
77	6	unneback	`always @ (posedge clk or negedge rst_n_i)`
78			`if (!rst_n_i)`
79	17	unneback	`tmp <= 2'b11;`
80	6	unneback	`else`
81	33	unneback	`tmp <= {1'b0,tmp[1]};`
82	17	unneback	`vl_gbuf buf_i0( .i(tmp[0]), .o(rst_o));`
83	6	unneback	`endmodule`
84			`// vl_pll`
85	32	unneback	`///////////////////////////////////////////////////////////////////////////////`
86	17	unneback	`timescale 1 ps/1 ps
87	6	unneback	`module vl_pll ( clk_i, rst_n_i, lock, clk_o, rst_o);`
88			`parameter index = 0;`
89			`parameter number_of_clk = 1;`
90	17	unneback	`parameter period_time_0 = 20000;`
91			`parameter period_time_1 = 20000;`
92			`parameter period_time_2 = 20000;`
93			`parameter lock_delay = 2000000;`
94	6	unneback	`input clk_i, rst_n_i;`
95			`output lock;`
96			`output reg [0:number_of_clk-1] clk_o;`
97			`output [0:number_of_clk-1] rst_o;`
98			`ifdef SIM_PLL
99			`always`
100			`#((period_time_0)/2) clk_o[0] <= (!rst_n_i) ? 0 : ~clk_o[0];`
101			`generate if (number_of_clk > 1)`
102			`always`
103			`#((period_time_1)/2) clk_o[1] <= (!rst_n_i) ? 0 : ~clk_o[1];`
104			`endgenerate`
105			`generate if (number_of_clk > 2)`
106			`always`
107			`#((period_time_2)/2) clk_o[2] <= (!rst_n_i) ? 0 : ~clk_o[2];`
108			`endgenerate`
109			`genvar i;`
110			`generate for (i=0;i<number_of_clk;i=i+1) begin: clock`
111			`vl_sync_rst rst_i0 ( .rst_n_i(rst_n_i \| lock), .rst_o(rst_o[i]), .clk(clk_o[i]));`
112			`end`
113			`endgenerate`
114			`assign #lock_delay lock = rst_n_i;`
115			`endmodule`
116			`else
117			`generate if (number_of_clk==1 & index==0) begin`
118			`pll0 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]));`
119			`end`
120			`endgenerate // index==0`
121			`generate if (number_of_clk==1 & index==1) begin`
122			`pll1 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]));`
123			`end`
124			`endgenerate // index==1`
125			`generate if (number_of_clk==1 & index==2) begin`
126			`pll2 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]));`
127			`end`
128			`endgenerate // index==2`
129			`generate if (number_of_clk==1 & index==3) begin`
130			`pll3 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]));`
131			`end`
132			`endgenerate // index==0`
133			`generate if (number_of_clk==2 & index==0) begin`
134			`pll0 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]));`
135			`end`
136			`endgenerate // index==0`
137			`generate if (number_of_clk==2 & index==1) begin`
138			`pll1 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]));`
139			`end`
140			`endgenerate // index==1`
141			`generate if (number_of_clk==2 & index==2) begin`
142			`pll2 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]));`
143			`end`
144			`endgenerate // index==2`
145			`generate if (number_of_clk==2 & index==3) begin`
146			`pll3 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]));`
147			`end`
148			`endgenerate // index==0`
149			`generate if (number_of_clk==3 & index==0) begin`
150			`pll0 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2]));`
151			`end`
152			`endgenerate // index==0`
153			`generate if (number_of_clk==3 & index==1) begin`
154			`pll1 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2]));`
155			`end`
156			`endgenerate // index==1`
157			`generate if (number_of_clk==3 & index==2) begin`
158			`pll2 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2]));`
159			`end`
160			`endgenerate // index==2`
161			`generate if (number_of_clk==3 & index==3) begin`
162			`pll3 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2]));`
163			`end`
164			`endgenerate // index==0`
165			`genvar i;`
166			`generate for (i=0;i<number_of_clk;i=i+1) begin: clock`
167	40	unneback	`vl_sync_rst rst_i0 ( .rst_n_i(rst_n_i \| lock), .rst_o(rst_o), .clk(clk_o[i]));`
168	6	unneback	`end`
169			`endgenerate`
170			`endmodule`
171			`endif
172	32	unneback	`///////////////////////////////////////////////////////////////////////////////`
173	6	unneback	`//actel`
174			`//////////////////////////////////////////////////////////////////////`
175			`//// ////`
176			`//// Versatile library, registers ////`
177			`//// ////`
178			`//// Description ////`
179			`//// Different type of registers ////`
180			`//// ////`
181			`//// ////`
182			`//// To Do: ////`
183			`//// - add more different registers ////`
184			`//// ////`
185			`//// Author(s): ////`
186			`//// - Michael Unneback, unneback@opencores.org ////`
187			`//// ORSoC AB ////`
188			`//// ////`
189			`//////////////////////////////////////////////////////////////////////`
190			`//// ////`
191			`//// Copyright (C) 2010 Authors and OPENCORES.ORG ////`
192			`//// ////`
193			`//// This source file may be used and distributed without ////`
194			`//// restriction provided that this copyright statement is not ////`
195			`//// removed from the file and that any derivative work contains ////`
196			`//// the original copyright notice and the associated disclaimer. ////`
197			`//// ////`
198			`//// This source file is free software; you can redistribute it ////`
199			`//// and/or modify it under the terms of the GNU Lesser General ////`
200			`//// Public License as published by the Free Software Foundation; ////`
201			`//// either version 2.1 of the License, or (at your option) any ////`
202			`//// later version. ////`
203			`//// ////`
204			`//// This source is distributed in the hope that it will be ////`
205			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
206			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
207			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
208			`//// details. ////`
209			`//// ////`
210			`//// You should have received a copy of the GNU Lesser General ////`
211			`//// Public License along with this source; if not, download it ////`
212			`//// from http://www.opencores.org/lgpl.shtml ////`
213			`//// ////`
214			`//////////////////////////////////////////////////////////////////////`
215	18	unneback	`module vl_dff ( d, q, clk, rst);`
216	6	unneback	`parameter width = 1;`
217			`parameter reset_value = 0;`
218			`input [width-1:0] d;`
219			`input clk, rst;`
220			`output reg [width-1:0] q;`
221			`always @ (posedge clk or posedge rst)`
222			`if (rst)`
223			`q <= reset_value;`
224			`else`
225			`q <= d;`
226			`endmodule`
227	18	unneback	`module vl_dff_array ( d, q, clk, rst);`
228	6	unneback	`parameter width = 1;`
229			`parameter depth = 2;`
230			`parameter reset_value = 1'b0;`
231			`input [width-1:0] d;`
232			`input clk, rst;`
233			`output [width-1:0] q;`
234			`reg [0:depth-1] q_tmp [width-1:0];`
235			`integer i;`
236			`always @ (posedge clk or posedge rst)`
237			`if (rst) begin`
238			`for (i=0;i<depth;i=i+1)`
239			`q_tmp[i] <= {width{reset_value}};`
240			`end else begin`
241			`q_tmp[0] <= d;`
242			`for (i=1;i<depth;i=i+1)`
243			`q_tmp[i] <= q_tmp[i-1];`
244			`end`
245			`assign q = q_tmp[depth-1];`
246			`endmodule`
247	18	unneback	`module vl_dff_ce ( d, ce, q, clk, rst);`
248	6	unneback	`parameter width = 1;`
249			`parameter reset_value = 0;`
250			`input [width-1:0] d;`
251			`input ce, clk, rst;`
252			`output reg [width-1:0] q;`
253			`always @ (posedge clk or posedge rst)`
254			`if (rst)`
255			`q <= reset_value;`
256			`else`
257			`if (ce)`
258			`q <= d;`
259			`endmodule`
260	18	unneback	`module vl_dff_ce_clear ( d, ce, clear, q, clk, rst);`
261	8	unneback	`parameter width = 1;`
262			`parameter reset_value = 0;`
263			`input [width-1:0] d;`
264	10	unneback	`input ce, clear, clk, rst;`
265	8	unneback	`output reg [width-1:0] q;`
266			`always @ (posedge clk or posedge rst)`
267			`if (rst)`
268			`q <= reset_value;`
269			`else`
270			`if (ce)`
271			`if (clear)`
272			`q <= {width{1'b0}};`
273			`else`
274			`q <= d;`
275			`endmodule`
276	24	unneback	`module vl_dff_ce_set ( d, ce, set, q, clk, rst);`
277			`parameter width = 1;`
278			`parameter reset_value = 0;`
279			`input [width-1:0] d;`
280			`input ce, set, clk, rst;`
281			`output reg [width-1:0] q;`
282			`always @ (posedge clk or posedge rst)`
283			`if (rst)`
284			`q <= reset_value;`
285			`else`
286			`if (ce)`
287			`if (set)`
288			`q <= {width{1'b1}};`
289			`else`
290			`q <= d;`
291			`endmodule`
292	29	unneback	`module vl_spr ( sp, r, q, clk, rst);`
293	64	unneback	`//parameter width = 1;`
294			`parameter reset_value = 1'b0;`
295	29	unneback	`input sp, r;`
296			`output reg q;`
297			`input clk, rst;`
298			`always @ (posedge clk or posedge rst)`
299			`if (rst)`
300			`q <= reset_value;`
301			`else`
302			`if (sp)`
303			`q <= 1'b1;`
304			`else if (r)`
305			`q <= 1'b0;`
306			`endmodule`
307			`module vl_srp ( s, rp, q, clk, rst);`
308			`parameter width = 1;`
309			`parameter reset_value = 0;`
310			`input s, rp;`
311			`output reg q;`
312			`input clk, rst;`
313			`always @ (posedge clk or posedge rst)`
314			`if (rst)`
315			`q <= reset_value;`
316			`else`
317			`if (rp)`
318			`q <= 1'b0;`
319			`else if (s)`
320			`q <= 1'b1;`
321			`endmodule`
322	18	unneback	`module vl_dff_sr ( aclr, aset, clock, data, q);`
323	6	unneback	`input aclr;`
324			`input aset;`
325			`input clock;`
326			`input data;`
327			`output reg q;`
328			`always @ (posedge clock or posedge aclr or posedge aset)`
329			`if (aclr)`
330			`q <= 1'b0;`
331			`else if (aset)`
332			`q <= 1'b1;`
333			`else`
334			`q <= data;`
335			`endmodule`
336			`// LATCH`
337			`// For targtes not supporting LATCH use dff_sr with clk=1 and data=1`
338	40	unneback	`module vl_latch ( d, le, q, clk);`
339	6	unneback	`input d, le;`
340	48	unneback	`input clk;`
341			`always @ (le or d)`
342	60	unneback	`if (le)`
343	48	unneback	`d <= q;`
344	6	unneback	`endmodule`
345	18	unneback	`module vl_shreg ( d, q, clk, rst);`
346	17	unneback	`parameter depth = 10;`
347			`input d;`
348			`output q;`
349			`input clk, rst;`
350			`reg [1:depth] dffs;`
351			`always @ (posedge clk or posedge rst)`
352			`if (rst)`
353			`dffs <= {depth{1'b0}};`
354			`else`
355			`dffs <= {d,dffs[1:depth-1]};`
356			`assign q = dffs[depth];`
357			`endmodule`
358	18	unneback	`module vl_shreg_ce ( d, ce, q, clk, rst);`
359	17	unneback	`parameter depth = 10;`
360			`input d, ce;`
361			`output q;`
362			`input clk, rst;`
363			`reg [1:depth] dffs;`
364			`always @ (posedge clk or posedge rst)`
365			`if (rst)`
366			`dffs <= {depth{1'b0}};`
367			`else`
368			`if (ce)`
369			`dffs <= {d,dffs[1:depth-1]};`
370			`assign q = dffs[depth];`
371			`endmodule`
372	18	unneback	`module vl_delay ( d, q, clk, rst);`
373	15	unneback	`parameter depth = 10;`
374			`input d;`
375			`output q;`
376			`input clk, rst;`
377			`reg [1:depth] dffs;`
378			`always @ (posedge clk or posedge rst)`
379			`if (rst)`
380			`dffs <= {depth{1'b0}};`
381			`else`
382			`dffs <= {d,dffs[1:depth-1]};`
383			`assign q = dffs[depth];`
384			`endmodule`
385	18	unneback	`module vl_delay_emptyflag ( d, q, emptyflag, clk, rst);`
386	17	unneback	`parameter depth = 10;`
387			`input d;`
388			`output q, emptyflag;`
389			`input clk, rst;`
390			`reg [1:depth] dffs;`
391			`always @ (posedge clk or posedge rst)`
392			`if (rst)`
393			`dffs <= {depth{1'b0}};`
394			`else`
395			`dffs <= {d,dffs[1:depth-1]};`
396			`assign q = dffs[depth];`
397			`assign emptyflag = !(\|dffs);`
398			`endmodule`
399	98	unneback	`module vl_pulse2toggle ( pl, q, clk, rst);`
400	94	unneback	`input pl;`
401	98	unneback	`output reg q;`
402	94	unneback	`input clk, rst;`
403			`always @ (posedge clk or posedge rst)`
404			`if (rst)`
405			`q <= 1'b0;`
406			`else`
407			`q <= pl ^ q;`
408			`endmodule`
409	98	unneback	`module vl_toggle2pulse (d, pl, clk, rst);`
410	94	unneback	`input d;`
411			`output pl;`
412			`input clk, rst;`
413			`reg dff;`
414			`always @ (posedge clk or posedge rst)`
415			`if (rst)`
416			`dff <= 1'b0;`
417			`else`
418			`dff <= d;`
419	98	unneback	`assign pl = d ^ dff;`
420	94	unneback	`endmodule`
421			`module vl_synchronizer (d, q, clk, rst);`
422			`input d;`
423			`output reg q;`
424	116	unneback	`input clk, rst;`
425	94	unneback	`reg dff;`
426			`always @ (posedge clk or posedge rst)`
427			`if (rst)`
428	100	unneback	`{q,dff} <= 2'b00;`
429	94	unneback	`else`
430	100	unneback	`{q,dff} <= {dff,d};`
431	94	unneback	`endmodule`
432	97	unneback	`module vl_cdc ( start_pl, take_it_pl, take_it_grant_pl, got_it_pl, clk_src, rst_src, clk_dst, rst_dst);`
433	94	unneback	`input start_pl;`
434			`output take_it_pl;`
435			`input take_it_grant_pl; // note: connect to take_it_pl to generate automatic ack`
436			`output got_it_pl;`
437			`input clk_src, rst_src;`
438			`input clk_dst, rst_dst;`
439			`wire take_it_tg, take_it_tg_sync;`
440			`wire got_it_tg, got_it_tg_sync;`
441			`// src -> dst`
442			`vl_pulse2toggle p2t0 (`
443			`.pl(start_pl),`
444			`.q(take_it_tg),`
445			`.clk(clk_src),`
446			`.rst(rst_src));`
447			`vl_synchronizer sync0 (`
448			`.d(take_it_tg),`
449			`.q(take_it_tg_sync),`
450			`.clk(clk_dst),`
451			`.rst(rst_dst));`
452			`vl_toggle2pulse t2p0 (`
453	100	unneback	`.d(take_it_tg_sync),`
454	94	unneback	`.pl(take_it_pl),`
455			`.clk(clk_dst),`
456			`.rst(rst_dst));`
457			`// dst -> src`
458	98	unneback	`vl_pulse2toggle p2t1 (`
459	94	unneback	`.pl(take_it_grant_pl),`
460			`.q(got_it_tg),`
461			`.clk(clk_dst),`
462			`.rst(rst_dst));`
463			`vl_synchronizer sync1 (`
464			`.d(got_it_tg),`
465			`.q(got_it_tg_sync),`
466			`.clk(clk_src),`
467			`.rst(rst_src));`
468			`vl_toggle2pulse t2p1 (`
469	100	unneback	`.d(got_it_tg_sync),`
470	94	unneback	`.pl(got_it_pl),`
471			`.clk(clk_src),`
472			`.rst(rst_src));`
473			`endmodule`
474	6	unneback	`//////////////////////////////////////////////////////////////////////`
475			`//// ////`
476	18	unneback	`//// Logic functions ////`
477			`//// ////`
478			`//// Description ////`
479			`//// Logic functions such as multiplexers ////`
480			`//// ////`
481			`//// ////`
482			`//// To Do: ////`
483			`//// - ////`
484			`//// ////`
485			`//// Author(s): ////`
486			`//// - Michael Unneback, unneback@opencores.org ////`
487			`//// ORSoC AB ////`
488			`//// ////`
489			`//////////////////////////////////////////////////////////////////////`
490			`//// ////`
491			`//// Copyright (C) 2010 Authors and OPENCORES.ORG ////`
492			`//// ////`
493			`//// This source file may be used and distributed without ////`
494			`//// restriction provided that this copyright statement is not ////`
495			`//// removed from the file and that any derivative work contains ////`
496			`//// the original copyright notice and the associated disclaimer. ////`
497			`//// ////`
498			`//// This source file is free software; you can redistribute it ////`
499			`//// and/or modify it under the terms of the GNU Lesser General ////`
500			`//// Public License as published by the Free Software Foundation; ////`

Browse

Tools

Subversion Repositories versatile_library

[/] [versatile_library/] [trunk/] [rtl/] [verilog/] [versatile_library_actel.v] - Blame information for rev 127