URL https://opencores.org/ocsvn/versatile_mem_ctrl/versatile_mem_ctrl/trunk

Subversion Repositories versatile_mem_ctrl

[/] [versatile_mem_ctrl/] [trunk/] [bench/] [ddr/] [tb.v] - Blame information for rev 86

Go to most recent revision | Details | Compare with Previous | View Log


/****************************************************************************************
*
*    File Name:  tb.v
*
* Dependencies:  ddr2.v, ddr2_parameters.vh
*
*  Description:  Micron SDRAM DDR2 (Double Data Rate 2) test bench
*
*         Note: -Set simulator resolution to "ps" accuracy
*               -Set Debug = 0 to disable $display messages
*
*   Disclaimer   This software code and all associated documentation, comments or other
*  of Warranty:  information (collectively "Software") is provided "AS IS" without
*                warranty of any kind. MICRON TECHNOLOGY, INC. ("MTI") EXPRESSLY
*                DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
*                TO, NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND ANY IMPLIED WARRANTIES
*                OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. MTI DOES NOT
*                WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE
*                OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.
*                FURTHERMORE, MTI DOES NOT MAKE ANY REPRESENTATIONS REGARDING THE USE OR
*                THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS,
*                ACCURACY, RELIABILITY, OR OTHERWISE. THE ENTIRE RISK ARISING OUT OF USE
*                OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT SHALL MTI,
*                ITS AFFILIATED COMPANIES OR THEIR SUPPLIERS BE LIABLE FOR ANY DIRECT,
*                INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES (INCLUDING,
*                WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION,
*                OR LOSS OF INFORMATION) ARISING OUT OF YOUR USE OF OR INABILITY TO USE
*                THE SOFTWARE, EVEN IF MTI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
*                DAMAGES. Because some jurisdictions prohibit the exclusion or
*                limitation of liability for consequential or incidental damages, the
*                above limitation may not apply to you.
*
*                Copyright 2003 Micron Technology, Inc. All rights reserved.
*
****************************************************************************************/
 
// DO NOT CHANGE THE TIMESCALE
 
`timescale 1ps / 1ps
 
module tb;
 
`include "ddr2_parameters.vh"
 
    // ports
    reg                         ck;
    wire                        ck_n = ~ck;
    reg                         cke;
    reg                         cs_n;
    reg                         ras_n;
    reg                         cas_n;
    reg                         we_n;
    reg           [BA_BITS-1:0] ba;
    reg         [ADDR_BITS-1:0] a;
    wire          [DM_BITS-1:0] dm;
    wire          [DQ_BITS-1:0] dq;
    wire         [DQS_BITS-1:0] dqs;
    wire         [DQS_BITS-1:0] dqs_n;
    wire         [DQS_BITS-1:0] rdqs_n;
    reg                         odt;
 
    // mode registers
    reg         [ADDR_BITS-1:0] mode_reg0;                                 //Mode Register
    reg         [ADDR_BITS-1:0] mode_reg1;                                 //Extended Mode Register
    wire                  [2:0] cl       = mode_reg0[6:4];                 //CAS Latency
    wire                        bo       = mode_reg0[3];                   //Burst Order
    wire                  [7:0] bl       = (1<<mode_reg0[2:0]);            //Burst Length
    wire                        rdqs_en  = mode_reg1[11];                  //RDQS Enable
    wire                        dqs_n_en = ~mode_reg1[10];                 //dqs# Enable
    wire                  [2:0] al       = mode_reg1[5:3];                 //Additive Latency
    wire                  [3:0] rl       = al + cl;                        //Read Latency
    wire                  [3:0] wl       = al + cl-1'b1;                   //Write Latency
 
    // dq transmit
    reg                         dq_en;
    reg           [DM_BITS-1:0] dm_out;
    reg           [DQ_BITS-1:0] dq_out;
    reg                         dqs_en;
    reg          [DQS_BITS-1:0] dqs_out;
    assign                      dm       = dq_en ? dm_out : {DM_BITS{1'bz}};
    assign                      dq       = dq_en ? dq_out : {DQ_BITS{1'bz}};
    assign                      dqs      = dqs_en ? dqs_out : {DQS_BITS{1'bz}};
    assign                      dqs_n    = (dqs_en & dqs_n_en) ? ~dqs_out : {DQS_BITS{1'bz}};
 
    // dq receive
    reg           [DM_BITS-1:0] dm_fifo [2*(AL_MAX+CL_MAX)+BL_MAX:0];
    reg           [DQ_BITS-1:0] dq_fifo [2*(AL_MAX+CL_MAX)+BL_MAX:0];
    wire          [DQ_BITS-1:0] q0, q1, q2, q3;
    reg                   [1:0] burst_cntr;
    assign                      rdqs_n   = {DQS_BITS{1'bz}};
 
    // timing definition in tCK units
    real                        tck;
    wire                 [11:0] taa      = ceil(CL_TIME/tck);
    wire                 [11:0] tanpd    = TANPD;
    wire                 [11:0] taond    = TAOND;
    wire                 [11:0] taofd    = ceil(TAOFD);
    wire                 [11:0] taxpd    = TAXPD;
    wire                 [11:0] tccd     = TCCD;
    wire                 [11:0] tcke     = TCKE;
    wire                 [11:0] tdllk    = TDLLK;
    wire                 [11:0] tfaw     = ceil(TFAW/tck);
    wire                 [11:0] tmod     = ceil(TMOD/tck);
    wire                 [11:0] tmrd     = TMRD;
    wire                 [11:0] tras     = ceil(TRAS_MIN/tck);
    wire                 [11:0] trc      = TRC;
    wire                 [11:0] trcd     = ceil(TRCD/tck);
    wire                 [11:0] trfc     = ceil(TRFC_MIN/tck);
    wire                 [11:0] trp      = ceil(TRP/tck);
    wire                 [11:0] trrd     = ceil(TRRD/tck);
    wire                 [11:0] trtp     = ceil(TRTP/tck);
    wire                 [11:0] twr      = ceil(TWR/tck);
    wire                 [11:0] twtr     = ceil(TWTR/tck);
    wire                 [11:0] txard    = TXARD;
    wire                 [11:0] txards   = TXARDS;
    wire                 [11:0] txp      = TXP;
    wire                 [11:0] txsnr    = ceil(TXSNR/tck);
    wire                 [11:0] txsrd    = TXSRD;
 
    initial begin
        $timeformat (-9, 1, " ns", 1);
`ifdef period
        tck <= `period;
`else
        tck <= TCK_MIN;
`endif
        ck <= 1'b1;
    end
 
    // component instantiation
    ddr2 sdramddr2 (
        ck,
        ck_n,
        cke,
        cs_n,
        ras_n,
        cas_n,
        we_n,
        dm,
        ba,
        a,
        dq,
        dqs,
        dqs_n,
        rdqs_n,
        odt
    );
 
    // clock generator
    always @(posedge ck) begin
      ck <= #(tck/2) 1'b0;
      ck <= #(tck) 1'b1;
    end
 
    function integer ceil;
        input number;
        real number;
        if (number > $rtoi(number))
            ceil = $rtoi(number) + 1;
        else
            ceil = number;
    endfunction
 
    function integer max;
        input arg1;
        input arg2;
        integer arg1;
        integer arg2;
        if (arg1 > arg2)
            max = arg1;
        else
            max = arg2;
    endfunction
 
    task power_up;
        begin
            cke    <= 1'b0;
            odt    <= 1'b0;
            repeat(10) @(negedge ck);
            cke    <= 1'b1;
            nop (400000/tck+1);
        end
    endtask
 
    task load_mode;
        input   [BA_BITS-1:0] bank;
        input [ADDR_BITS-1:0] addr;
        begin
            case (bank)
                0: mode_reg0 = addr;
                1: mode_reg1 = addr;
            endcase
            cke   <= 1'b1;
            cs_n  <= 1'b0;
            ras_n <= 1'b0;
            cas_n <= 1'b0;
            we_n  <= 1'b0;
            ba    <= bank;
            a     <= addr;
            @(negedge ck);
        end
    endtask
 
    task refresh;
        begin
            cke   <= 1'b1;
            cs_n  <= 1'b0;
            ras_n <= 1'b0;
            cas_n <= 1'b0;
            we_n  <= 1'b1;
            @(negedge ck);
        end
    endtask
 
    task precharge;
        input [BA_BITS-1:0] bank;
        input               ap; //precharge all
        begin
            cke   <= 1'b1;
            cs_n  <= 1'b0;
            ras_n <= 1'b0;
            cas_n <= 1'b1;
            we_n  <= 1'b0;
            ba    <= bank;
            a     <= (ap<<10);
            @(negedge ck);
        end
    endtask
 
    task activate;
        input   [BA_BITS-1:0] bank;
        input  [ROW_BITS-1:0] row;
        begin
            cke   <= 1'b1;
            cs_n  <= 1'b0;
            ras_n <= 1'b0;
            cas_n <= 1'b1;
            we_n  <= 1'b1;
            ba    <= bank;
            a     <=  row;
            @(negedge ck);
        end
    endtask
 
    //write task supports burst lengths <= 8
    task write;
        input   [BA_BITS-1:0] bank;
        input  [COL_BITS-1:0] col;
        input                 ap; //Auto Precharge
        input [8*DM_BITS-1:0] dm;
        input [8*DQ_BITS-1:0] dq;
        reg   [ADDR_BITS-1:0] atemp [1:0];
        integer i;
        begin
            cke   <= 1'b1;
            cs_n  <= 1'b0;
            ras_n <= 1'b1;
            cas_n <= 1'b0;
            we_n  <= 1'b0;
            ba    <= bank;
            atemp[0] = col & 10'h3ff;   //addr[ 9: 0] = COL[ 9: 0]
            atemp[1] = (col>>10)<<11;   //addr[ N:11] = COL[ N:10]
            a     <= atemp[0] | atemp[1] | (ap<<10);
            for (i=0; i<=bl; i=i+1) begin
 
                dqs_en <= #(wl*tck + i*tck/2) 1'b1;
                if (i%2 == 0) begin
                    dqs_out <= #(wl*tck + i*tck/2) {DQS_BITS{1'b0}};
                end else begin
                    dqs_out <= #(wl*tck + i*tck/2) {DQS_BITS{1'b1}};
                end
 
                dq_en  <= #(wl*tck + i*tck/2 + tck/4) 1'b1;
                dm_out <= #(wl*tck + i*tck/2 + tck/4) dm>>i*DM_BITS;
                dq_out <= #(wl*tck + i*tck/2 + tck/4) dq>>i*DQ_BITS;
            end
            dqs_en <= #(wl*tck + bl*tck/2 + tck/2) 1'b0;
            dq_en  <= #(wl*tck + bl*tck/2 + tck/4) 1'b0;
            @(negedge ck);
        end
    endtask
 
    // read without data verification
    task read;
        input    [BA_BITS-1:0] bank;
        input   [COL_BITS-1:0] col;
        input                  ap; //Auto Precharge
        reg    [ADDR_BITS-1:0] atemp [1:0];
        begin
            cke   <= 1'b1;
            cs_n  <= 1'b0;
            ras_n <= 1'b1;
            cas_n <= 1'b0;
            we_n  <= 1'b1;
            ba    <= bank;
            atemp[0] = col & 10'h3ff;   //addr[ 9: 0] = COL[ 9: 0]
            atemp[1] = (col>>10)<<11;   //addr[ N:11] = COL[ N:10]
            a     <= atemp[0] | atemp[1] | (ap<<10);
            @(negedge ck);
        end
    endtask
 
    task nop;
        input [31:0] count;
        begin
            cke   <= 1'b1;
            cs_n  <= 1'b0;
            ras_n <= 1'b1;
            cas_n <= 1'b1;
            we_n  <= 1'b1;
            repeat(count) @(negedge ck);
        end
    endtask
 
    task deselect;
        input [31:0] count;
        begin
            cke   <= 1'b1;
            cs_n  <= 1'b1;
            ras_n <= 1'b1;
            cas_n <= 1'b1;
            we_n  <= 1'b1;
            repeat(count) @(negedge ck);
        end
    endtask
 
    task power_down;
        input [31:0] count;
        begin
            cke   <= 1'b0;
            cs_n  <= 1'b1;
            ras_n <= 1'b1;
            cas_n <= 1'b1;
            we_n  <= 1'b1;
            repeat(count) @(negedge ck);
        end
    endtask
 
    task self_refresh;
        input [31:0] count;
        begin
            cke   <= 1'b0;
            cs_n  <= 1'b0;
            ras_n <= 1'b0;
            cas_n <= 1'b0;
            we_n  <= 1'b1;
            cs_n  <= #(tck) 1'b1;
            ras_n <= #(tck) 1'b1;
            cas_n <= #(tck) 1'b1;
            we_n  <= #(tck) 1'b1;
            repeat(count) @(negedge ck);
        end
    endtask
 
    // read with data verification
    task read_verify;
        input   [BA_BITS-1:0] bank;
        input  [COL_BITS-1:0] col;
        input                 ap; //Auto Precharge
        input [8*DM_BITS-1:0] dm; //Expected Data Mask
        input [8*DQ_BITS-1:0] dq; //Expected Data
        integer i;
        begin
            read (bank, col, ap);
            for (i=0; i<bl; i=i+1) begin
                dm_fifo[2*rl + i] = dm >> (i*DM_BITS);
                dq_fifo[2*rl + i] = dq >> (i*DQ_BITS);
            end
        end
    endtask
 
    // receiver(s) for data_verify process
    dqrx dqrx[DQS_BITS-1:0] (dqs, dq, q0, q1, q2, q3);
 
    // perform data verification as a result of read_verify task call
    always @(ck) begin:data_verify
        integer i;
        integer j;
        reg [DQ_BITS-1:0] bit_mask;
        reg [DM_BITS-1:0] dm_temp;
        reg [DQ_BITS-1:0] dq_temp;
 
        for (i = !ck; (i < 2/(2.0 - !ck)); i=i+1) begin
            if (dm_fifo[i] === {DM_BITS{1'bx}}) begin
                burst_cntr = 0;
            end else begin
 
                dm_temp = dm_fifo[i];
                for (j=0; j<DQ_BITS; j=j+1) begin
                    bit_mask[j] = !dm_temp[j/8];
                end
 
                case (burst_cntr)
                    0: dq_temp =  q0;
                    1: dq_temp =  q1;
                    2: dq_temp =  q2;
                    3: dq_temp =  q3;
                endcase
                //if ( ((dq_temp & bit_mask) === (dq_fifo[i] & bit_mask)))
                //    $display ("%m at time %t: INFO: Successful read data compare.  Expected = %h, Actual = %h, Mask = %h, i = %d", $time, dq_fifo[i], dq_temp, bit_mask, burst_cntr);
                if ((dq_temp & bit_mask) !== (dq_fifo[i] & bit_mask))
                    $display ("%m at time %t: ERROR: Read data miscompare.  Expected = %h, Actual = %h, Mask = %h, i = %d", $time, dq_fifo[i], dq_temp, bit_mask, burst_cntr);
 
                burst_cntr = burst_cntr + 1;
            end
        end
 
        if (ck) begin
            if (dm_fifo[2] === {DM_BITS{1'bx}}) begin
                dqrx[0%DQS_BITS].ptr <= 0; // v2k syntax
                dqrx[1%DQS_BITS].ptr <= 0; // v2k syntax
                dqrx[2%DQS_BITS].ptr <= 0; // v2k syntax
                dqrx[3%DQS_BITS].ptr <= 0; // v2k syntax
            end
        end else begin
            for (i=0; i<=(2*(AL_MAX+CL_MAX)+BL_MAX); i=i+1) begin
                dm_fifo[i] = dm_fifo[i+2];
                dq_fifo[i] = dq_fifo[i+2];
            end
        end
    end
 
    // End-of-test triggered in 'subtest.vh'
    task test_done;
        begin
            $display ("%m at time %t: INFO: Simulation is Complete", $time);
            $stop(0);
        end
    endtask
 
    // Test included from external file
    `include "subtest.vh"
 
endmodule
 
module dqrx (
    dqs, dq, q0, q1, q2, q3
);
 
    `include "ddr2_parameters.vh"
 
    input  dqs;
    input  [DQ_BITS/DQS_BITS-1:0] dq;
    output [DQ_BITS/DQS_BITS-1:0] q0;
    output [DQ_BITS/DQS_BITS-1:0] q1;
    output [DQ_BITS/DQS_BITS-1:0] q2;
    output [DQ_BITS/DQS_BITS-1:0] q3;
 
    reg [DQ_BITS/DQS_BITS-1:0] q [3:0];
 
    assign q0  = q[0];
    assign q1  = q[1];
    assign q2  = q[2];
    assign q3  = q[3];
 
    reg [1:0] ptr;
    reg dqs_q;
 
    always @(dqs) begin
        if (dqs ^ dqs_q) begin
            #(TDQSQ + 1);
            q[ptr] <= dq;
            ptr <= (ptr + 1)%4;
        end
        dqs_q <= dqs;
    end
 
endmodule

Browse

Tools

Subversion Repositories versatile_mem_ctrl

[/] [versatile_mem_ctrl/] [trunk/] [bench/] [ddr/] [tb.v] - Blame information for rev 86

Line No.	Rev	Author	Line
1	11	mikaeljf	`/****************************************************************************************`
2			`*`
3			`* File Name: tb.v`
4			`*`
5			`* Dependencies: ddr2.v, ddr2_parameters.vh`
6			`*`
7			`* Description: Micron SDRAM DDR2 (Double Data Rate 2) test bench`
8			`*`
9			`* Note: -Set simulator resolution to "ps" accuracy`
10			`* -Set Debug = 0 to disable $display messages`
11			`*`
12			`* Disclaimer This software code and all associated documentation, comments or other`
13			`* of Warranty: information (collectively "Software") is provided "AS IS" without`
14			`* warranty of any kind. MICRON TECHNOLOGY, INC. ("MTI") EXPRESSLY`
15			`* DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED`
16			`* TO, NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND ANY IMPLIED WARRANTIES`
17			`* OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. MTI DOES NOT`
18			`* WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE`
19			`* OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.`
20			`* FURTHERMORE, MTI DOES NOT MAKE ANY REPRESENTATIONS REGARDING THE USE OR`
21			`* THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS,`
22			`* ACCURACY, RELIABILITY, OR OTHERWISE. THE ENTIRE RISK ARISING OUT OF USE`
23			`* OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT SHALL MTI,`
24			`* ITS AFFILIATED COMPANIES OR THEIR SUPPLIERS BE LIABLE FOR ANY DIRECT,`
25			`* INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES (INCLUDING,`
26			`* WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION,`
27			`* OR LOSS OF INFORMATION) ARISING OUT OF YOUR USE OF OR INABILITY TO USE`
28			`* THE SOFTWARE, EVEN IF MTI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH`
29			`* DAMAGES. Because some jurisdictions prohibit the exclusion or`
30			`* limitation of liability for consequential or incidental damages, the`
31			`* above limitation may not apply to you.`
32			`*`
33			`* Copyright 2003 Micron Technology, Inc. All rights reserved.`
34			`*`
35			`****************************************************************************************/`
36
37			`// DO NOT CHANGE THE TIMESCALE`
38
39			`timescale 1ps / 1ps
40
41			`module tb;`
42
43			`include "ddr2_parameters.vh"
44
45			`// ports`
46			`reg ck;`
47			`wire ck_n = ~ck;`
48			`reg cke;`
49			`reg cs_n;`
50			`reg ras_n;`
51			`reg cas_n;`
52			`reg we_n;`
53			`reg [BA_BITS-1:0] ba;`
54			`reg [ADDR_BITS-1:0] a;`
55			`wire [DM_BITS-1:0] dm;`
56			`wire [DQ_BITS-1:0] dq;`
57			`wire [DQS_BITS-1:0] dqs;`
58			`wire [DQS_BITS-1:0] dqs_n;`
59			`wire [DQS_BITS-1:0] rdqs_n;`
60			`reg odt;`
61
62			`// mode registers`
63			`reg [ADDR_BITS-1:0] mode_reg0; //Mode Register`
64			`reg [ADDR_BITS-1:0] mode_reg1; //Extended Mode Register`
65			`wire [2:0] cl = mode_reg0[6:4]; //CAS Latency`
66			`wire bo = mode_reg0[3]; //Burst Order`
67			`wire [7:0] bl = (1<<mode_reg0[2:0]); //Burst Length`
68			`wire rdqs_en = mode_reg1[11]; //RDQS Enable`
69			`wire dqs_n_en = ~mode_reg1[10]; //dqs# Enable`
70			`wire [2:0] al = mode_reg1[5:3]; //Additive Latency`
71			`wire [3:0] rl = al + cl; //Read Latency`
72			`wire [3:0] wl = al + cl-1'b1; //Write Latency`
73
74			`// dq transmit`
75			`reg dq_en;`
76			`reg [DM_BITS-1:0] dm_out;`
77			`reg [DQ_BITS-1:0] dq_out;`
78			`reg dqs_en;`
79			`reg [DQS_BITS-1:0] dqs_out;`
80			`assign dm = dq_en ? dm_out : {DM_BITS{1'bz}};`
81			`assign dq = dq_en ? dq_out : {DQ_BITS{1'bz}};`
82			`assign dqs = dqs_en ? dqs_out : {DQS_BITS{1'bz}};`
83			`assign dqs_n = (dqs_en & dqs_n_en) ? ~dqs_out : {DQS_BITS{1'bz}};`
84
85			`// dq receive`
86			`reg [DM_BITS-1:0] dm_fifo [2*(AL_MAX+CL_MAX)+BL_MAX:0];`
87			`reg [DQ_BITS-1:0] dq_fifo [2*(AL_MAX+CL_MAX)+BL_MAX:0];`
88			`wire [DQ_BITS-1:0] q0, q1, q2, q3;`
89			`reg [1:0] burst_cntr;`
90			`assign rdqs_n = {DQS_BITS{1'bz}};`
91
92			`// timing definition in tCK units`
93			`real tck;`
94			`wire [11:0] taa = ceil(CL_TIME/tck);`
95			`wire [11:0] tanpd = TANPD;`
96			`wire [11:0] taond = TAOND;`
97			`wire [11:0] taofd = ceil(TAOFD);`
98			`wire [11:0] taxpd = TAXPD;`
99			`wire [11:0] tccd = TCCD;`
100			`wire [11:0] tcke = TCKE;`
101			`wire [11:0] tdllk = TDLLK;`
102			`wire [11:0] tfaw = ceil(TFAW/tck);`
103			`wire [11:0] tmod = ceil(TMOD/tck);`
104			`wire [11:0] tmrd = TMRD;`
105			`wire [11:0] tras = ceil(TRAS_MIN/tck);`
106			`wire [11:0] trc = TRC;`
107			`wire [11:0] trcd = ceil(TRCD/tck);`
108			`wire [11:0] trfc = ceil(TRFC_MIN/tck);`
109			`wire [11:0] trp = ceil(TRP/tck);`
110			`wire [11:0] trrd = ceil(TRRD/tck);`
111			`wire [11:0] trtp = ceil(TRTP/tck);`
112			`wire [11:0] twr = ceil(TWR/tck);`
113			`wire [11:0] twtr = ceil(TWTR/tck);`
114			`wire [11:0] txard = TXARD;`
115			`wire [11:0] txards = TXARDS;`
116			`wire [11:0] txp = TXP;`
117			`wire [11:0] txsnr = ceil(TXSNR/tck);`
118			`wire [11:0] txsrd = TXSRD;`
119
120			`initial begin`
121			`$timeformat (-9, 1, " ns", 1);`
122			`ifdef period
123			tck <= `period;
124			`else
125			`tck <= TCK_MIN;`
126			`endif
127			`ck <= 1'b1;`
128			`end`
129
130			`// component instantiation`
131			`ddr2 sdramddr2 (`
132			`ck,`
133			`ck_n,`
134			`cke,`
135			`cs_n,`
136			`ras_n,`
137			`cas_n,`
138			`we_n,`
139			`dm,`
140			`ba,`
141			`a,`
142			`dq,`
143			`dqs,`
144			`dqs_n,`
145			`rdqs_n,`
146			`odt`
147			`);`
148
149			`// clock generator`
150			`always @(posedge ck) begin`
151			`ck <= #(tck/2) 1'b0;`
152			`ck <= #(tck) 1'b1;`
153			`end`
154
155			`function integer ceil;`
156			`input number;`
157			`real number;`
158			`if (number > $rtoi(number))`
159			`ceil = $rtoi(number) + 1;`
160			`else`
161			`ceil = number;`
162			`endfunction`
163
164			`function integer max;`
165			`input arg1;`
166			`input arg2;`
167			`integer arg1;`
168			`integer arg2;`
169			`if (arg1 > arg2)`
170			`max = arg1;`
171			`else`
172			`max = arg2;`
173			`endfunction`
174
175			`task power_up;`
176			`begin`
177			`cke <= 1'b0;`
178			`odt <= 1'b0;`
179			`repeat(10) @(negedge ck);`
180			`cke <= 1'b1;`
181			`nop (400000/tck+1);`
182			`end`
183			`endtask`
184
185			`task load_mode;`
186			`input [BA_BITS-1:0] bank;`
187			`input [ADDR_BITS-1:0] addr;`
188			`begin`
189			`case (bank)`
190			`0: mode_reg0 = addr;`
191			`1: mode_reg1 = addr;`
192			`endcase`
193			`cke <= 1'b1;`
194			`cs_n <= 1'b0;`
195			`ras_n <= 1'b0;`
196			`cas_n <= 1'b0;`
197			`we_n <= 1'b0;`
198			`ba <= bank;`
199			`a <= addr;`
200			`@(negedge ck);`
201			`end`
202			`endtask`
203
204			`task refresh;`
205			`begin`
206			`cke <= 1'b1;`
207			`cs_n <= 1'b0;`
208			`ras_n <= 1'b0;`
209			`cas_n <= 1'b0;`
210			`we_n <= 1'b1;`
211			`@(negedge ck);`
212			`end`
213			`endtask`
214
215			`task precharge;`
216			`input [BA_BITS-1:0] bank;`
217			`input ap; //precharge all`
218			`begin`
219			`cke <= 1'b1;`
220			`cs_n <= 1'b0;`
221			`ras_n <= 1'b0;`
222			`cas_n <= 1'b1;`
223			`we_n <= 1'b0;`
224			`ba <= bank;`
225			`a <= (ap<<10);`
226			`@(negedge ck);`
227			`end`
228			`endtask`
229
230			`task activate;`
231			`input [BA_BITS-1:0] bank;`
232			`input [ROW_BITS-1:0] row;`
233			`begin`
234			`cke <= 1'b1;`
235			`cs_n <= 1'b0;`
236			`ras_n <= 1'b0;`
237			`cas_n <= 1'b1;`
238			`we_n <= 1'b1;`
239			`ba <= bank;`
240			`a <= row;`
241			`@(negedge ck);`
242			`end`
243			`endtask`
244
245			`//write task supports burst lengths <= 8`
246			`task write;`
247			`input [BA_BITS-1:0] bank;`
248			`input [COL_BITS-1:0] col;`
249			`input ap; //Auto Precharge`
250			`input [8*DM_BITS-1:0] dm;`
251			`input [8*DQ_BITS-1:0] dq;`
252			`reg [ADDR_BITS-1:0] atemp [1:0];`
253			`integer i;`
254			`begin`
255			`cke <= 1'b1;`
256			`cs_n <= 1'b0;`
257			`ras_n <= 1'b1;`
258			`cas_n <= 1'b0;`
259			`we_n <= 1'b0;`
260			`ba <= bank;`
261			`atemp[0] = col & 10'h3ff; //addr[ 9: 0] = COL[ 9: 0]`
262			`atemp[1] = (col>>10)<<11; //addr[ N:11] = COL[ N:10]`
263			`a <= atemp[0] \| atemp[1] \| (ap<<10);`
264			`for (i=0; i<=bl; i=i+1) begin`
265
266			`dqs_en <= #(wltck + itck/2) 1'b1;`
267			`if (i%2 == 0) begin`
268			`dqs_out <= #(wltck + itck/2) {DQS_BITS{1'b0}};`
269			`end else begin`
270			`dqs_out <= #(wltck + itck/2) {DQS_BITS{1'b1}};`
271			`end`
272
273			`dq_en <= #(wltck + itck/2 + tck/4) 1'b1;`
274			`dm_out <= #(wltck + itck/2 + tck/4) dm>>i*DM_BITS;`
275			`dq_out <= #(wltck + itck/2 + tck/4) dq>>i*DQ_BITS;`
276			`end`
277			`dqs_en <= #(wltck + bltck/2 + tck/2) 1'b0;`
278			`dq_en <= #(wltck + bltck/2 + tck/4) 1'b0;`
279			`@(negedge ck);`
280			`end`
281			`endtask`
282
283			`// read without data verification`
284			`task read;`
285			`input [BA_BITS-1:0] bank;`
286			`input [COL_BITS-1:0] col;`
287			`input ap; //Auto Precharge`
288			`reg [ADDR_BITS-1:0] atemp [1:0];`
289			`begin`
290			`cke <= 1'b1;`
291			`cs_n <= 1'b0;`
292			`ras_n <= 1'b1;`
293			`cas_n <= 1'b0;`
294			`we_n <= 1'b1;`
295			`ba <= bank;`
296			`atemp[0] = col & 10'h3ff; //addr[ 9: 0] = COL[ 9: 0]`
297			`atemp[1] = (col>>10)<<11; //addr[ N:11] = COL[ N:10]`
298			`a <= atemp[0] \| atemp[1] \| (ap<<10);`
299			`@(negedge ck);`
300			`end`
301			`endtask`
302
303			`task nop;`
304			`input [31:0] count;`
305			`begin`
306			`cke <= 1'b1;`
307			`cs_n <= 1'b0;`
308			`ras_n <= 1'b1;`
309			`cas_n <= 1'b1;`
310			`we_n <= 1'b1;`
311			`repeat(count) @(negedge ck);`
312			`end`
313			`endtask`
314
315			`task deselect;`
316			`input [31:0] count;`
317			`begin`
318			`cke <= 1'b1;`
319			`cs_n <= 1'b1;`
320			`ras_n <= 1'b1;`
321			`cas_n <= 1'b1;`
322			`we_n <= 1'b1;`
323			`repeat(count) @(negedge ck);`
324			`end`
325			`endtask`
326
327			`task power_down;`
328			`input [31:0] count;`
329			`begin`
330			`cke <= 1'b0;`
331			`cs_n <= 1'b1;`
332			`ras_n <= 1'b1;`
333			`cas_n <= 1'b1;`
334			`we_n <= 1'b1;`
335			`repeat(count) @(negedge ck);`
336			`end`
337			`endtask`
338
339			`task self_refresh;`
340			`input [31:0] count;`
341			`begin`
342			`cke <= 1'b0;`
343			`cs_n <= 1'b0;`
344			`ras_n <= 1'b0;`
345			`cas_n <= 1'b0;`
346			`we_n <= 1'b1;`
347			`cs_n <= #(tck) 1'b1;`
348			`ras_n <= #(tck) 1'b1;`
349			`cas_n <= #(tck) 1'b1;`
350			`we_n <= #(tck) 1'b1;`
351			`repeat(count) @(negedge ck);`
352			`end`
353			`endtask`
354
355			`// read with data verification`
356			`task read_verify;`
357			`input [BA_BITS-1:0] bank;`
358			`input [COL_BITS-1:0] col;`
359			`input ap; //Auto Precharge`
360			`input [8*DM_BITS-1:0] dm; //Expected Data Mask`
361			`input [8*DQ_BITS-1:0] dq; //Expected Data`
362			`integer i;`
363			`begin`
364			`read (bank, col, ap);`
365			`for (i=0; i<bl; i=i+1) begin`
366			`dm_fifo[2rl + i] = dm >> (iDM_BITS);`
367			`dq_fifo[2rl + i] = dq >> (iDQ_BITS);`
368			`end`
369			`end`
370			`endtask`
371
372			`// receiver(s) for data_verify process`
373			`dqrx dqrx[DQS_BITS-1:0] (dqs, dq, q0, q1, q2, q3);`
374
375			`// perform data verification as a result of read_verify task call`
376			`always @(ck) begin:data_verify`
377			`integer i;`
378			`integer j;`
379			`reg [DQ_BITS-1:0] bit_mask;`
380			`reg [DM_BITS-1:0] dm_temp;`
381			`reg [DQ_BITS-1:0] dq_temp;`
382
383			`for (i = !ck; (i < 2/(2.0 - !ck)); i=i+1) begin`
384			`if (dm_fifo[i] === {DM_BITS{1'bx}}) begin`
385			`burst_cntr = 0;`
386			`end else begin`
387
388			`dm_temp = dm_fifo[i];`
389			`for (j=0; j<DQ_BITS; j=j+1) begin`
390			`bit_mask[j] = !dm_temp[j/8];`
391			`end`
392
393			`case (burst_cntr)`
394			`0: dq_temp = q0;`
395			`1: dq_temp = q1;`
396			`2: dq_temp = q2;`
397			`3: dq_temp = q3;`
398			`endcase`
399			`//if ( ((dq_temp & bit_mask) === (dq_fifo[i] & bit_mask)))`
400			`// $display ("%m at time %t: INFO: Successful read data compare. Expected = %h, Actual = %h, Mask = %h, i = %d", $time, dq_fifo[i], dq_temp, bit_mask, burst_cntr);`
401			`if ((dq_temp & bit_mask) !== (dq_fifo[i] & bit_mask))`
402			`$display ("%m at time %t: ERROR: Read data miscompare. Expected = %h, Actual = %h, Mask = %h, i = %d", $time, dq_fifo[i], dq_temp, bit_mask, burst_cntr);`
403
404			`burst_cntr = burst_cntr + 1;`
405			`end`
406			`end`
407
408			`if (ck) begin`
409			`if (dm_fifo[2] === {DM_BITS{1'bx}}) begin`
410			`dqrx[0%DQS_BITS].ptr <= 0; // v2k syntax`
411			`dqrx[1%DQS_BITS].ptr <= 0; // v2k syntax`
412			`dqrx[2%DQS_BITS].ptr <= 0; // v2k syntax`
413			`dqrx[3%DQS_BITS].ptr <= 0; // v2k syntax`
414			`end`
415			`end else begin`
416			`for (i=0; i<=(2*(AL_MAX+CL_MAX)+BL_MAX); i=i+1) begin`
417			`dm_fifo[i] = dm_fifo[i+2];`
418			`dq_fifo[i] = dq_fifo[i+2];`
419			`end`
420			`end`
421			`end`
422
423			`// End-of-test triggered in 'subtest.vh'`
424			`task test_done;`
425			`begin`
426			`$display ("%m at time %t: INFO: Simulation is Complete", $time);`
427			`$stop(0);`
428			`end`
429			`endtask`
430
431			`// Test included from external file`
432			`include "subtest.vh"
433
434			`endmodule`
435
436			`module dqrx (`
437			`dqs, dq, q0, q1, q2, q3`
438			`);`
439
440			`include "ddr2_parameters.vh"
441
442			`input dqs;`
443			`input [DQ_BITS/DQS_BITS-1:0] dq;`
444			`output [DQ_BITS/DQS_BITS-1:0] q0;`
445			`output [DQ_BITS/DQS_BITS-1:0] q1;`
446			`output [DQ_BITS/DQS_BITS-1:0] q2;`
447			`output [DQ_BITS/DQS_BITS-1:0] q3;`
448
449			`reg [DQ_BITS/DQS_BITS-1:0] q [3:0];`
450
451			`assign q0 = q[0];`
452			`assign q1 = q[1];`
453			`assign q2 = q[2];`
454			`assign q3 = q[3];`
455
456			`reg [1:0] ptr;`
457			`reg dqs_q;`
458
459			`always @(dqs) begin`
460			`if (dqs ^ dqs_q) begin`
461			`#(TDQSQ + 1);`
462			`q[ptr] <= dq;`
463			`ptr <= (ptr + 1)%4;`
464			`end`
465			`dqs_q <= dqs;`
466			`end`
467
468			`endmodule`