Subversion Repositories versatile_mem_ctrl

# Usage:

# cd /versatile_mem_ctrl/trunk/sim/rtl_sim/run/

# vsim -gui -do ../bin/sim_xilinx.tcl

set DESIGN_NAME "versatile_memory_controller"

set WAVE_FILE wave_ddr.do

set FORCE_LIBRARY_RECOMPILE 0

# Quit simulation if you are running one

quit -sim

# Create and open project

if {[file exists ${DESIGN_NAME}_sim_xilinx.mpf]} {

project open ${DESIGN_NAME}_sim_xilinx

} else {

project new . ${DESIGN_NAME}_sim_xilinx

}

# Compile Xilinx libraries

if {![file exists unisims_ver] || $FORCE_LIBRARY_RECOMPILE} {

vlib unisims_ver

vmap unisims_ver unisims_ver

vlog -work unisims_ver /opt/Xilinx/11.1/ISE/verilog/src/unisims/*.v

}

if {![file exists simprims_ver] || $FORCE_LIBRARY_RECOMPILE} {

vlib simprims_ver

vmap simprims_ver simprims_ver

vlog -work simprims_ver /opt/Xilinx/11.1/ISE/verilog/src/simprims/*.v

}

if {![file exists xilinxcorelib_ver] || $FORCE_LIBRARY_RECOMPILE} {

vlib xilinxcorelib_ver

vmap xilinxcorelib_ver xilinxcorelib_ver

vlog -work xilinxcorelib_ver /opt/Xilinx/11.1/ISE/verilog/src/XilinxCoreLib/*.v

}

# Compile the glbl.v module

vlog /opt/Xilinx/11.1/ISE/verilog/src/glbl.v

# Compile project source code

vlog ../../../rtl/verilog/versatile_mem_ctrl_ip.v +incdir+../../../rtl/verilog/

# Compile test bench source code

vlog ../../../bench/ddr/ddr2.v +incdir+../../../bench/ddr/

vlog ../../../bench/wb0_ddr.v ../../../bench/wb1_ddr.v ../../../bench/wb4_ddr.v +define+x16 ../../../bench/tb_top.v +incdir+../../../bench/

# Quit without asking

set PrefMain(forceQuit) 1

# Invoke the simulator

# -gui      Open the GUI without loading a design

# -novopt   Force incremental mode (pre-6.0 behavior)

# -L        Search library for design units instantiated from Verilog and for VHDL default component binding

vsim -gui -novopt -L unisims_ver -L xilinxcorelib_ver work.versatile_mem_ctrl_tb work.glbl

# Open waveform viewer

view wave -title "${DESIGN_NAME}"

# Open signal viewer

view signals

# Run the .do file to load signals to the waveform viewer

#do $WAVE_FILE

# Run the simulation

run 330 us