Subversion Repositories w11

-- $Id: mt45w8mw16b.vhd 314 2010-07-09 17:38:41Z mueller $

--

-- Copyright 2010- by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>

--

-- This program is free software; you may redistribute and/or modify it under

-- the terms of the GNU General Public License as published by the Free

-- Software Foundation, either version 2, or at your option any later version.

--

-- This program is distributed in the hope that it will be useful, but

-- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY

-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

-- for complete details.

-- 

------------------------------------------------------------------------------

-- Module Name:    mt45w8mw16b - sim

-- Description:    Micron MT45W8MW16B CellularRAM model

--                 Currently a much simplified model

--                 - only async accesses

--                 - ignores CLK and CRE

--                 - simple model for response of DATA lines, but no

--                   check for timing violations of control lines

--

-- Dependencies:   -

-- Test bench:     -

-- Target Devices: generic

-- Tool versions:  xst 11.4; ghdl 0.26

-- Revision History: 

-- Date         Rev Version  Comment

-- 2010-06-03   299   1.3.1  improved timing model (WE cycle, robust T_apa)

-- 2010-06-03   298   1.3    add timing model again

-- 2010-05-28   295   1.2    drop timing (was incorrect), pure functional now

-- 2010-05-21   293   1.1    add BCR (only read of default so far)

-- 2010-05-16   291   1.0    Initial version (inspired by is61lv25616al)

------------------------------------------------------------------------------

-- Truth table accoring to data sheet:

--  

-- Asynchronous Mode (BCR(15)=1)

--   Operation               CLK ADV_N CE_N OE_N WE_N CRE xB_N WT  DATA

--   Read                     L     L    L    L    H   L    L  act data-out

--   Write                    L     L    L    X    L   L    L  act data-in

--   Standby                  L     X    H    X    X   L    X  'z' 'z'

--   CRE write                L     L    L    H    L   H    X  act 'z'

--   CRE read                 L     L    L    L    H   H    L  act conf-out

--

-- Burst Mode (BCR(15)=0)

--   Operation               CLK ADV_N CE_N OE_N WE_N CRE xB_N WT  DATA

--   Async read               L     L    L    L    H   L    L  act data-out

--   Async write              L     L    L    X    L   L    L  act data-in 

--   Standby                  L     X    H    X    X   L    X  'z' 'z'

--   Initial burst read      0-1    L    L    X    H   L    L  act  X

--   Initial burst write     0-1    L    L    H    L   L    X  act  X

--   Burst continue          0-1    H    L    X    X   X    X  act data-in/out

--   CRE write               0-1    L    L    H    L   H    X  act 'z'

--   CRE read                0-1    L    L    L    H   H    L  act conf-out

--

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_arith.all;

use work.slvtypes.all;

entity mt45w8mw16b is                   -- Micron MT45W8MW16B CellularRAM model

  port (

    CLK : in slbit;                     -- clock for synchonous operation

    CE_N : in slbit;                    -- chip enable        (act.low)

    OE_N : in slbit;                    -- output enable      (act.low)

    WE_N : in slbit;                    -- write enable       (act.low)

    UB_N : in slbit;                    -- upper byte enable  (act.low)

    LB_N : in slbit;                    -- lower byte enable  (act.low)

    ADV_N : in slbit;                   -- address valid      (act.low)

    CRE : in slbit;                     -- control register enable

    MWAIT : out slbit;                  -- wait (for burst read/write)

    ADDR : in slv23;                    -- address lines

    DATA : inout slv16                  -- data lines

  );

end mt45w8mw16b;

architecture sim of mt45w8mw16b is

  -- timing constants for -701 speed grade (70 ns; 104 MHz)

  constant T_aa   : time := 70 ns;      -- address access time             (max)

  constant T_apa  : time := 20 ns;      -- page acess time                 (max)

  constant T_oh   : time :=  5 ns;      -- output hold from addr change    (max)

  constant T_oe   : time := 20 ns;      -- output enable to valid output   (max)

  constant T_ohz  : time :=  8 ns;      -- output disable to high-z output (max)

  constant T_olz  : time :=  3 ns;      -- output enable to low-z output   (min)

  constant T_lz   : time := 10 ns;      -- chip enable to low-z output     (min)

  constant T_hz   : time :=  8 ns;      -- chip disable to high-z output   (max)

  constant memsize : positive := 2**(ADDR'length);

  constant datzero : slv(DATA'range) := (others=>'0');

  type ram_type is array (0 to memsize-1) of slv(DATA'range);

  constant bcr_f_mode   : integer := 15;              -- operating mode 

  constant bcr_f_ilat   : integer := 14;              -- initial latency

  subtype  bcr_f_lc    is integer range 13 downto 11; -- latency counter

  constant bcr_f_wp     : integer := 10;              -- wait polarity

  constant bcr_f_wc     : integer :=  8;              -- wait configuration

  subtype  bcr_f_drive is integer range  5 downto  4; -- drive strength

  constant bcr_f_bw     : integer :=  3;              -- burst wrap

  subtype  bcr_f_bl    is integer range  2 downto  0; -- burst length

  subtype  f_byte1       is integer range 15 downto 8;

  subtype  f_byte0       is integer range  7 downto 0;

  signal CE : slbit := '0';

  signal OE : slbit := '0';

  signal WE : slbit := '0';

  signal BE_L : slbit := '0';

  signal BE_U : slbit := '0';

  signal ADV : slbit := '0';

  signal WE_L_EFF : slbit := '0';

  signal WE_U_EFF : slbit := '0';

  signal R_BCR_MODE  : slbit := '1';    -- mode: def: async

  signal R_BCR_ILAT  : slbit := '0';    -- ilat: def: variable

  signal R_BCR_LC    : slv3  := "011";  -- lc:   def: code 3

  signal R_BCR_WP    : slbit := '1';    -- wp:   def: active high

  signal R_BCR_WC    : slbit := '1';    -- wc:   def: assert one before

  signal R_BCR_DRIVE : slv2  := "01";   -- drive:def: 1/2

  signal R_BCR_BW    : slbit := '1';    -- bw:   def: no wrap

  signal R_BCR_BL    : slv3  := "111";  -- bl:   def: continuous

  signal L_ADDR : slv23 := (others=>'0');

  signal DOUT_VAL_EN : slbit := '0';

  signal DOUT_VAL_AA : slbit := '0';

  signal DOUT_VAL_PA : slbit := '0';

  signal DOUT_VAL_OE : slbit := '0';

  signal DOUT_LZ_CE  : slbit := '0';

  signal DOUT_LZ_OE  : slbit := '0';

  signal OEWE : slbit := '0';

  signal DOUT : slv16 := (others=>'0');

begin

  CE   <= not CE_N;

  OE   <= not OE_N;

  WE   <= not WE_N;

  BE_L <= not LB_N;

  BE_U <= not UB_N;

  ADV  <= not ADV_N;

  WE_L_EFF <= CE and WE and BE_L;

  WE_U_EFF <= CE and WE and BE_U;

  -- address valid logic, latch ADDR when ADV true

  proc_adv: process (ADV, ADDR)

  begin

    if ADV = '1' then

      L_ADDR <= ADDR;

    end if;

  end process proc_adv;

  proc_dout_val: process (CE, OE, WE, BE_L, BE_U, ADV, L_ADDR)

    variable addr_last : slv23 := (others=>'1');

  begin

    if (CE'event   and CE='1') or

       (BE_L'event and BE_L='1') or

       (BE_U'event and BE_U='1') or

       (WE'event   and WE='0') or

       (ADV'event  and ADV='1') then

      DOUT_VAL_EN <= '0', '1' after T_aa;

    end if;

    if L_ADDR'event then

      DOUT_VAL_PA <= '0', '1' after T_apa;

      if L_ADDR(22 downto 4) /= addr_last(22 downto 4) then

        DOUT_VAL_AA <= '0', '1' after T_aa;

      end if;

      addr_last := L_ADDR;

    end if;

    if OE'event and OE='1' then

      DOUT_VAL_OE <= '0', '1' after T_oe;

    end if;

  end process proc_dout_val;

  -- to simplify things assume that OE and (not WE) have same effect on output

  -- drivers. The timing rules are very similar indeed...

  OEWE <= OE and (not WE);

  proc_dout_lz: process (CE, OEWE)

  begin

    if (CE'event) then

      if CE = '1' then

        DOUT_LZ_CE <= '1' after T_lz;

      else

        DOUT_LZ_CE <= '0' after T_hz;

      end if;

    end if;

    if (OEwe'event) then

      if OEWE = '1' then

        DOUT_LZ_OE <= '1' after T_olz;

      else

        DOUT_LZ_OE <= '0' after T_ohz;

      end if;

    end if;

  end process proc_dout_lz;

  proc_cram: process (CE, OE, WE, WE_L_EFF, WE_U_EFF, L_ADDR, DATA)

    variable ram : ram_type := (others=>datzero);

  begin

    -- end of write cycle

    -- note: to_x01 used below to prevent that 'z' a written into mem.

    if WE_L_EFF'event and WE_L_EFF='0' then

      ram(conv_integer(unsigned(L_ADDR)))(f_byte0) := to_x01(DATA(f_byte0));

    end if;

    if WE_U_EFF'event and WE_U_EFF='0' then

      ram(conv_integer(unsigned(L_ADDR)))(f_byte1) := to_x01(DATA(f_byte1));

    end if;

    DOUT <= ram(conv_integer(unsigned(L_ADDR)));

  end process proc_cram;

  proc_data: process (DOUT, DOUT_VAL_EN, DOUT_VAL_AA, DOUT_VAL_PA, DOUT_VAL_OE,

                      DOUT_LZ_CE, DOUT_LZ_OE)

    variable idout : slv16 := (others=>'0');

  begin

    idout := DOUT;

    if DOUT_VAL_EN='0' or DOUT_VAL_AA='0' or

       DOUT_VAL_PA='0' or DOUT_VAL_OE='0' then

      idout := (others=>'X');

    end if;

    if DOUT_LZ_CE='0' or DOUT_LZ_OE='0' then

      idout := (others=>'Z');

    end if;

    DATA <= idout;

  end process proc_data;

  proc_mwait: process (CE)

  begin

    -- WT driver (just a dummy)

    if CE = '1' then

      MWAIT <= '1';

    else

      MWAIT <= 'Z';

    end if;

  end process proc_mwait;

end sim;