Subversion Repositories wf3d

//=======================================================================

// Project Monophony

//   Wire-Frame 3D Graphics Accelerator IP Core

//

// File:

//   fm_mic_cnv.v

//

// Abstract:

//   32-64 bit data bus width conversion

//

// Author:

//   Kenji Ishimaru (info.info.wf3d@gmail.com)

//

//======================================================================

//

// Copyright (c) 2016, Kenji Ishimaru

// All rights reserved.

//

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions are met:

//

//  -Redistributions of source code must retain the above copyright notice,

//   this list of conditions and the following disclaimer.

//  -Redistributions in binary form must reproduce the above copyright notice,

//   this list of conditions and the following disclaimer in the documentation

//   and/or other materials provided with the distribution.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR

// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

//

// Revision History

module fm_mic_cnv (

    clk_core,

    rst_x,

  // incoming

    i_req_in,

    i_wr_in,

    i_adrs_in,

    i_len_in,

    o_ack_in,

    i_be_in,

    i_wdata_in,

    o_rstr_in,

    o_rdata_in,

  // outcoming

    o_req_out,

    o_wr_out,

    o_adrs_out,

    o_len_out,

    i_ack_out,

    o_be_out,

    o_wdata_out,

    i_rstr_out,

    i_rdata_out

);

`include "polyphony_params.v"

//////////////////////////////////

// I/O port definition

//////////////////////////////////

input          clk_core;

input          rst_x;

// incoming

input          i_req_in;

input          i_wr_in;

input [31:2]   i_adrs_in;

input [2:0]    i_len_in;

output         o_ack_in;

input [3:0]    i_be_in;

input [31:0]   i_wdata_in;

output         o_rstr_in;

output [31:0]  o_rdata_in;

// outcoming

output         o_req_out;

output         o_wr_out;

output [31:3]  o_adrs_out;

output [5:0]   o_len_out;

input          i_ack_out;

output [7:0]   o_be_out;

output [63:0]  o_wdata_out;

input          i_rstr_out;

input [63:0]   i_rdata_out;

//////////////////////////////////

// regs 

//////////////////////////////////

reg [2:0] r_cnt;

//////////////////////////////////

// wires 

//////////////////////////////////

wire w_sel;

wire w_fifo_write;

wire [3:0] w_fifo_din;

wire w_fifo_full;

wire w_read_end;

wire [3:0] w_fifo_dout;

wire w_empty;

wire w_add_lsb;

wire w_add_lsb_out;

wire [2:0] w_len;

wire w_dread_end;

wire [63:0]w_dfifo_dout;

wire w_dempty;

//////////////////////////////////

// assign statement 

//////////////////////////////////

assign o_req_out = i_req_in;

assign {o_adrs_out[31:3],w_add_lsb} = i_adrs_in[31:2];

assign o_len_out = i_len_in[2:1] + i_len_in[0];

assign o_be_out = (w_add_lsb) ? {i_be_in,4'h0} : {4'h0,i_be_in};

assign o_wdata_out = (w_add_lsb) ? {i_wdata_in,32'h0} : {32'h0,i_wdata_in};

assign o_wr_out = i_wr_in;

// command

assign w_fifo_din = {w_add_lsb,i_len_in};

assign {w_add_lsb_out,w_len} = w_fifo_dout;

assign w_fifo_write = o_req_out & i_ack_out & (!i_wr_in);

assign w_read_end = (!w_dempty) & (w_len == r_cnt);

assign o_ack_in = i_ack_out & !w_fifo_full;

// data

assign w_sel = (w_add_lsb_out) ?  r_cnt[0] : ~r_cnt[0];

assign w_dread_end = w_sel | w_read_end;

assign o_rstr_in = !w_dempty;

assign o_rdata_in = (w_sel) ? w_dfifo_dout[63:32] :w_dfifo_dout[31:0];

//////////////////////////////////

// module instantiation

//////////////////////////////////

always @(posedge clk_core or negedge rst_x) begin

  if (~rst_x) begin

    r_cnt <= 'd1;

  end else begin

    if (!w_dempty) begin

      if (w_len == r_cnt) r_cnt <= 'd1;

      else r_cnt <= r_cnt + 1'b1;

    end

  end

end

// len, lsb

fm_cmn_bfifo #(4,4) u_fifo (

  .clk_core(clk_core),

  .rst_x(rst_x),

  .i_wstrobe(w_fifo_write),

  .i_dt(w_fifo_din),

  .o_full(w_fifo_full),

  .i_renable(w_read_end),

  .o_dt(w_fifo_dout),

  .o_empty(w_empty),

  .o_dnum()

);

fm_cmn_bfifo #(64,4) u_dfifo (

  .clk_core(clk_core),

  .rst_x(rst_x),

  .i_wstrobe(i_rstr_out),

  .i_dt(i_rdata_out),

  .o_full(),

  .i_renable(w_dread_end),

  .o_dt(w_dfifo_dout),

  .o_empty(w_dempty),

  .o_dnum()

);

endmodule