Subversion Repositories wf3d

//=======================================================================

// Project Monophony

//   Wire-Frame 3D Graphics Accelerator IP Core

//

// File:

//   fm_avalon_wb.v

//

// Abstract:

//   AVALON-WISHBONE bus bridge

//

// Author:

//   Kenji Ishimaru (info.wf3d@gmail.com)

//

//======================================================================

//

// Copyright (c) 2015, Kenji Ishimaru

// All rights reserved.

//

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions are met:

//

//  -Redistributions of source code must retain the above copyright notice,

//   this list of conditions and the following disclaimer.

//  -Redistributions in binary form must reproduce the above copyright notice,

//   this list of conditions and the following disclaimer in the documentation

//   and/or other materials provided with the distribution.

//

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR

// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

//

// Revision History

module fm_avalon_wb(

    clk_core,

    rst_x,

    // AVALON bus

    i_av_adr,

    i_av_be,

    i_av_r,

    o_av_rd,

    i_av_w,

    i_av_wd,

    o_av_wait,

    // internal side

    o_req,

    o_wr,

    o_adrs,

    i_ack,

    o_be,

    o_wd,

    i_rd

);

parameter P_AVALON_ADR_WIDTH='d10;

parameter P_AVALON_BE_WIDTH='d4;

parameter P_AVALON_DATA_WIDTH='d32;

parameter P_INTERNAL_ADR_WIDTH=P_AVALON_ADR_WIDTH;

parameter P_INTERNAL_BE_WIDTH=P_AVALON_BE_WIDTH;

parameter P_INTERNAL_DATA_WIDTH=P_AVALON_DATA_WIDTH;

//////////////////////////////////

// I/O port definition

//////////////////////////////////

    input           clk_core;

    input           rst_x;

    // AVALON Bus

    input  [P_AVALON_ADR_WIDTH-1:0]

                   i_av_adr;

    input  [P_AVALON_BE_WIDTH-1:0]

                   i_av_be;

    input          i_av_r;

    output [P_AVALON_DATA_WIDTH-1:0]

                   o_av_rd;

    input          i_av_w;

    input  [P_AVALON_DATA_WIDTH-1:0]

                   i_av_wd;

    output         o_av_wait;

    // internal side

    output          o_req;

    output          o_wr;

    output [P_INTERNAL_ADR_WIDTH-1:0]

                    o_adrs;

    input           i_ack;

    output [P_INTERNAL_BE_WIDTH-1:0]

                    o_be;

    output [P_INTERNAL_DATA_WIDTH-1:0]

                    o_wd;

    input  [P_INTERNAL_DATA_WIDTH-1:0]

                    i_rd;

//////////////////////////////////

// parameter definition

//////////////////////////////////

    localparam P_IDLE         = 2'h0;

    localparam P_WAIT_ACK     = 2'h1;

    localparam P_R_WAIT_RDATA = 2'h2;

    localparam P_ACK_OUT      = 2'h3;

//////////////////////////////////

// reg

//////////////////////////////////

    reg  [1:0]  r_state;

    reg         r_req;

    reg         r_wr;

    reg  [P_INTERNAL_ADR_WIDTH-1:0]

                r_adrs;

    reg  [P_INTERNAL_DATA_WIDTH-1:0]

                r_rdata;

    reg  [P_INTERNAL_BE_WIDTH-1:0]

                r_be;

    reg  [P_INTERNAL_DATA_WIDTH-1:0]

                r_wd;

//////////////////////////////////

// wire

//////////////////////////////////

    wire  [P_INTERNAL_ADR_WIDTH-1:0]

                w_adrs;

    wire  [P_INTERNAL_DATA_WIDTH-1:0]

                w_rdata;

    wire  [P_INTERNAL_BE_WIDTH-1:0]

                w_be;

    wire  [P_INTERNAL_DATA_WIDTH-1:0]

                w_wd;

//////////////////////////////////

// assign

//////////////////////////////////

    generate

      if (P_INTERNAL_DATA_WIDTH == 'd8) begin

        wire [1:0] w_ba;

        assign o_av_rd = {'d4{r_rdata}};

        assign w_ba = i_av_be[1] ? 2'd1 :

                      i_av_be[2] ? 2'd2 :

                      i_av_be[3] ? 2'd3 :

                                   2'd0 ;

         assign w_adrs = {i_av_adr,w_ba};

        assign w_be = i_av_be[w_ba];

        assign w_wd = (w_ba == 'd1) ? i_av_wd[15:8]:

                      (w_ba == 'd2) ? i_av_wd[23:16]:

                      (w_ba == 'd3) ? i_av_wd[31:24]:

                                      i_av_wd[7:0];

      end else begin

        assign o_av_rd = r_rdata;

        assign w_adrs = i_av_adr;

        assign w_be = i_av_be;

        assign w_wd = i_av_wd;

      end

    endgenerate

    assign o_req = r_req;

    assign o_wr = r_wr;

    assign o_adrs = r_adrs;

    assign o_be = r_be;

    assign o_wd = r_wd;

    assign o_av_wait = !(!(i_av_r|i_av_w) & (r_state == P_IDLE) |

                         (r_state == P_ACK_OUT));

//////////////////////////////////

// always

//////////////////////////////////

    // core clock domain 

    always @(posedge clk_core or negedge rst_x) begin

      if (~rst_x) begin

        r_state <= P_IDLE;

        r_req <= 1'b0;

        r_wr <= 1'b0;

        r_adrs <= {P_INTERNAL_ADR_WIDTH{1'b0}};

        r_rdata <= {P_INTERNAL_DATA_WIDTH{1'b0}};

        r_be <= {P_INTERNAL_BE_WIDTH{1'b0}};

        r_wd <= {P_INTERNAL_DATA_WIDTH{1'b0}};

      end else begin

        case (r_state)

          P_IDLE: begin

            if (i_av_w) begin

              // write

              r_req <= 1'b1;

              r_wr <= 1'b1;

              r_adrs <= w_adrs;

              r_be <= w_be;

              r_wd <= w_wd;

              r_state <= P_WAIT_ACK;

            end else if (i_av_r) begin

              // read

              r_req <= 1'b1;

              r_wr <= 1'b0;

              r_adrs <= w_adrs;

              r_state <= P_WAIT_ACK;

                    end

          end

          P_WAIT_ACK: begin

            if (i_ack) begin

              r_req <= 1'b0;

              if (r_wr) begin

                // write

                r_state <= P_ACK_OUT;

              end else begin

                r_rdata <= i_rd;

                r_state <= P_ACK_OUT;

              end

            end

          end

          P_ACK_OUT: begin

            r_state <= P_IDLE;

          end

        endcase

      end

    end

endmodule