Subversion Repositories xulalx25soc

////////////////////////////////////////////////////////////////////////////////

//

// Filename:    ttybus.h

//

// Project:     XuLA2 board

//

// Purpose:     This is the C++ program on the command side that will interact

//              with a UART on an FPGA, to command the WISHBONE on that same

//              FPGA to ... whatever we wish to command it to do.

//

//              This code does not run on an FPGA, is not a test bench, neither

//              is it a simulator.  It is a portion of a command program

//              for commanding an FPGA.

//

//              This particular implementation is a complete rewrite of the

//              last implementation, adding compression into the interface that

//              wasn't there before.

//

//

// Creator:     Dan Gisselquist, Ph.D.

//              Gisselquist Technology, LLC

//

////////////////////////////////////////////////////////////////////////////////

//

// Copyright (C) 2015, Gisselquist Technology, LLC

//

// This program is free software (firmware): you can redistribute it and/or

// modify it under the terms of  the GNU General Public License as published

// by the Free Software Foundation, either version 3 of the License, or (at

// your option) any later version.

//

// This program is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// License:     GPL, v3, as defined and found on www.gnu.org,

//              http://www.gnu.org/licenses/gpl.html

//

//

////////////////////////////////////////////////////////////////////////////////

//

//

//

#ifndef TTYBUS_H

#define TTYBUS_H

#include "llcomms.h"

#include "devbus.h"

#define RDBUFLN 2048

class   TTYBUS : public DEVBUS {

public:

        unsigned long   m_total_nread;

private:

        LLCOMMSI        *m_dev;

        static  const   unsigned MAXRDLEN, MAXWRLEN;

        bool    m_interrupt_flag, m_decode_err, m_addr_set, m_bus_err;

        unsigned int    m_lastaddr;

        int     m_buflen, m_rdfirst, m_rdlast;

        char    *m_buf, *m_rdbuf;

        bool    m_wrloaded;

        int     m_rdaddr, m_wraddr;

        BUSW    m_readtbl[1024], m_writetbl[512];

        void    init(void) {

                m_interrupt_flag = false;

                m_buflen = 0; m_buf = NULL;

                m_addr_set = false;

                bufalloc(64);

                m_bus_err = false;

                m_decode_err = false;

                m_wrloaded = false;

                m_rdfirst = m_rdlast = 0;

                m_rdbuf = new char[RDBUFLN];

                m_rdaddr = m_wraddr = 0;

        }

        char    charenc(const int sixbitval) const;

        unsigned chardec(const char b) const;

        void    encode(const int fbits, const BUSW v, char *buf) const;

        unsigned decodestr(const char *buf) const;

        int     decodehex(const char hx) const;

        void    bufalloc(int len);

        BUSW    readword(void); // Reads a word value from the bus

        void    readv(const BUSW a, const int inc, const int len, BUSW *buf);

        void    writev(const BUSW a, const int p, const int len, const BUSW *buf);

        int     lclread(char *buf, int len);

        int     lclreadcode(char *buf, int len);

        char    *encode_address(const BUSW a);

        char    *readcmd(const int inc, const int len, char *buf);

public:

        TTYBUS(LLCOMMSI *comms) : m_dev(comms) { init(); }

        virtual ~TTYBUS(void) {

                m_dev->close();

                if (m_buf) delete[] m_buf; m_buf = NULL;

                delete m_rdbuf; m_rdbuf = NULL;

                delete  m_dev;

        }

        void    kill(void) { m_dev->close(); }

        void    close(void) {   m_dev->close(); }

        void    writeio(const BUSW a, const BUSW v);

        BUSW    readio(const BUSW a);

        void    readi(const BUSW a, const int len, BUSW *buf);

        void    readz(const BUSW a, const int len, BUSW *buf);

        void    writei(const BUSW a, const int len, const BUSW *buf);

        void    writez(const BUSW a, const int len, const BUSW *buf);

        bool    poll(void) { return m_interrupt_flag; };

        void    usleep(unsigned msec); // Sleep until interrupt

        void    wait(void); // Sleep until interrupt

        bool    bus_err(void) const { return m_bus_err; };

        void    reset_err(void) { m_bus_err = false; }

        void    clear(void) { m_interrupt_flag = false; }

};

#endif