Subversion Repositories xulalx25soc

################################################################################

##

## Filename:    Makefile

##

## Project:     XuLA2 board

##

## Purpose:     In case you don't want to fire up ISE, this Makefile attempts

##              to coordinate the build process without it.  While it works in

##      testing, there are some problems to this approach.  The first is that

##      if you bust timing, you may never know it--nothing will tell you it

##      failed.  Second, the output file is different from the output file

##      produced via ISE.  Still ... for a command line make script, it is a

##      (good) start.

##

##      Makefile targets:

##

##      xula.bit        The FPGA bitfile or configuration file

##

##      objdir          Makes a directory for temporary build files, which can

##                      then be removed later with a clean target.  While a

##                      great idea in principle, this doesn't work well in

##                      practice since Xilinx's ISE never uses it.

##

##      clean           Removes intermediate build files.

##

## Creator:     Dan Gisselquist, Ph.D.

##              Gisselquist Technology, LLC

##

################################################################################

##

## Copyright (C) 2015, Gisselquist Technology, LLC

##

## This program is free software (firmware): you can redistribute it and/or

## modify it under the terms of  the GNU General Public License as published

## by the Free Software Foundation, either version 3 of the License, or (at

## your option) any later version.

##

## This program is distributed in the hope that it will be useful, but WITHOUT

## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## License:     GPL, v3, as defined and found on www.gnu.org,

##              http:##www.gnu.org/licenses/gpl.html

##

##

################################################################################

##

##

DIR_SPACES  := $(subst /, ,$(CURDIR))

DIR_NAME    := $(word $(words $(DIR_SPACES)), $(DIR_SPACES))

PROJECT     := xula

BRD         := lx25

PART        := xc6s$(BRD)-ftg256-2

OBJDIR      := obj-xilinx

UCFFILE     := ../xula.ucf

ifeq ($(shell uname),Linux)

  MKDIR:=mkdir

else

  MKDIR:=gmkdir

endif

SRCDIR      := ../rtl

CPUDIR      := ../rtl/cpu

JTAGBUS := wbufifo.v wbubus.v wbucompactlines.v wbucompress.v           \

        wbudecompress.v wbudeword.v wbuexec.v wbuidleint.v wbuinput.v   \

        wbuoutput.v wbureadcw.v wbusixchar.v wbutohex.v

PERIPHERALS: wbgpio.v wbpwmaudio.v rxuart.v txuart.v uartdev.v          \

        rtcdate.v rtclight.v

CPUSRC := zipsystem.v                                                   \

        busdelay.v wbarbiter.v wbdblpriarb.v                            \

        zipcpu.v cpuops.v pfcache.v idecode.v pipemem.v pipefetch.v div.v \

        zipcounter.v zipjiffies.v ziptimer.v wbdmac.v wbwatchdog.v

SOURCES     := toplevel.v jtagser.v busmaster.v                         \

        ioslave.v memdev.v hexmap.v icontrol.v builddate.v              \

        wbspiflash.v lldspi.v                                           \

        wbsdramng.v wbscope.v wbscopc.v $(JTAGBUS)

RTLFILES := $(addprefix $(SRCDIR)/,$(SOURCES)) $(addprefix $(CPUDIR)/,$(CPUSRC))

all: objdir xula.bit

.PHONY: objdir

objdir:

        @bash -c "if [ ! -e $(OBJDIR)/ ]; then $(MKDIR) -p $(OBJDIR)/; fi"

$(OBJDIR)/$(PROJECT).ngc: $(RTLFILES) $(PROJECT).xst

        $(MKDIR) -p xst/projnav.tmp/

        xst -intstyle ise -ifn $(PROJECT).xst -ofn $(OBJDIR)/$(PROJECT).syr

        mv $(PROJECT).ngc $(OBJDIR)/$(PROJECT).ngc

        mv $(PROJECT).ngr $(OBJDIR)/$(PROJECT).ngr

$(OBJDIR)/$(PROJECT).ngd: $(OBJDIR)/$(PROJECT).ngc

        ngdbuild -intstyle ise -dd _ngo -nt timestamp \

        -uc $(UCFFILE) -p $(PART) $(OBJDIR)/$(PROJECT).ngc $(OBJDIR)/$(PROJECT).ngd

MAPOPTS := -w -logic_opt on -ol high -xe n -t 1 -xt 0 -r 4      \

        -global_opt speed -equivalent_register_removal on -mt 2 -detail \

        -ir off -ignore_keep_hierarchy -pr off -lc area -power off

$(OBJDIR)/$(PROJECT).ncd: $(OBJDIR)/$(PROJECT).ngd

        map -intstyle ise -p $(PART) $(MAPOPTS) \

        -o $(OBJDIR)/$(PROJECT)_map.ncd $(OBJDIR)/$(PROJECT).ngd $(OBJDIR)/$(PROJECT).pcf

$(OBJDIR)/$(PROJECT).ncd: $(OBJDIR)/$(PROJECT)_map.ncd

        par -w -intstyle ise -ol std -mt 4 $(OBJDIR)/$(PROJECT)_map.ncd $(OBJDIR)/$(PROJECT).ncd $(OBJDIR)/$(PROJECT).pcf

$(PROJECT).bit: $(OBJDIR)/$(PROJECT).ncd

        bitgen -f $(PROJECT).ut $(OBJDIR)/$(PROJECT).ncd $(PROJECT).bit

timing: $(OBJDIR)/$(PROJECT).ncd  $(OBJDIR)/$(PROJECT).pcf

        trce -intstyle ise -v 3 -s 2 -n 3 -fastpaths -xml $(OBJDIR)/$(PROJECT).twx -o $(OBJDIR)/$(PROJECT).ncd -o $(OBJDIR)/$(PROJECT).twr $(OBJDIR)/$(PROJECT).pcf

.PHONY: clean

clean:

        @-rm -rf $(OBJDIR)

        @-rm -f *.ngc *.ngd *.ncd *.pcf *.lso *.ngr *.bgn *.bld *.cmd_log

        @-rm -f *.drc *.gise *.map *.mrp *.ngm *.syr *.xwbt *.xrpt

        @-rm -f *.pad *.par *.psr *.ptwx *.unroutes *.xpi *.csv *.xml

        @-rm -f *.html *.xrpt *.log *.stx *.tcl *.txt *.twr *.twx

        @-rm -rf _ngo  _xmsgs xlnx_* ipcore_dir iseconfig templates xst

        @echo "All cleaned up"