| 1 |
12 |
bsa |
/*******************************************************************************************/
|
| 2 |
|
|
/** **/
|
| 3 |
|
|
/** COPYRIGHT (C) 2011, SYSTEMYDE INTERNATIONAL CORPORATION, ALL RIGHTS RESERVED **/
|
| 4 |
|
|
/** **/
|
| 5 |
|
|
/** external interface module Rev 0.0 07/21/2011 **/
|
| 6 |
|
|
/** **/
|
| 7 |
|
|
/*******************************************************************************************/
|
| 8 |
|
|
module extint (data_in, dma_ack, ftch_tran, halt_tran, iack_tran, io_addr_out, io_data_out,
|
| 9 |
|
|
io_read, io_strobe, io_tran, ivec_rd, mem_addr_out, mem_data_out, mem_rd,
|
| 10 |
|
|
mem_tran, mem_wr, reti_tran, t1, addr_reg_in, clkc, dmar_reg,
|
| 11 |
|
|
dout_io_reg, dout_mem_reg, halt_nxt, if_frst, inta_frst, io_data_in,
|
| 12 |
|
|
ivec_data_in, ld_dmaa, ld_wait, mem_data_in, output_inh, rd_frst, rd_nxt,
|
| 13 |
|
|
resetb, reti_nxt, tran_sel, wr_frst);
|
| 14 |
|
|
|
| 15 |
|
|
input clkc; /* main cpu clock */
|
| 16 |
|
|
input dmar_reg; /* latched dma request */
|
| 17 |
|
|
input halt_nxt; /* halt cycle identifier */
|
| 18 |
|
|
input if_frst; /* first part of fetch cycle identifier */
|
| 19 |
|
|
input inta_frst; /* first part of intack cycle identifier */
|
| 20 |
|
|
input ld_dmaa; /* load dma request */
|
| 21 |
|
|
input ld_wait; /* load wait request */
|
| 22 |
|
|
input output_inh; /* disable cpu outputs */
|
| 23 |
|
|
input rd_frst; /* first part of read cycle identifier */
|
| 24 |
|
|
input rd_nxt; /* read cycle identifier */
|
| 25 |
|
|
input resetb; /* internal reset */
|
| 26 |
|
|
input reti_nxt; /* reti cycle identifier */
|
| 27 |
|
|
input wr_frst; /* first part of write cycle identifier */
|
| 28 |
|
|
input [7:0] dout_io_reg; /* io data output */
|
| 29 |
|
|
input [7:0] dout_mem_reg; /* mem data output */
|
| 30 |
|
|
input [7:0] io_data_in; /* i/o input data bus */
|
| 31 |
|
|
input [7:0] ivec_data_in; /* interrupt vector bus */
|
| 32 |
|
|
input [7:0] mem_data_in; /* memory input bus */
|
| 33 |
|
|
input [15:0] addr_reg_in; /* processor logical address bus */
|
| 34 |
|
|
input [`TTYPE_IDX:0] tran_sel; /* transaction type select */
|
| 35 |
|
|
output dma_ack; /* dma acknowledge */
|
| 36 |
|
|
output ftch_tran; /* instruction fetch transaction */
|
| 37 |
|
|
output halt_tran; /* halt transaction */
|
| 38 |
|
|
output iack_tran; /* interrupt acknowledge transaction */
|
| 39 |
|
|
output io_read; /* i/o read enable */
|
| 40 |
|
|
output io_strobe; /* i/o data strobe */
|
| 41 |
|
|
output io_tran; /* i/o transaction */
|
| 42 |
|
|
output ivec_rd; /* interrupt vector enable */
|
| 43 |
|
|
output mem_rd; /* memory read enable */
|
| 44 |
|
|
output mem_tran; /* memory transaction */
|
| 45 |
|
|
output mem_wr; /* memory write enable */
|
| 46 |
|
|
output reti_tran; /* return from interrupt transaction */
|
| 47 |
|
|
output t1; /* first clock of transaction */
|
| 48 |
|
|
output [7:0] data_in; /* data input bus */
|
| 49 |
|
|
output [7:0] io_data_out; /* i/o output data bus */
|
| 50 |
|
|
output [7:0] mem_data_out; /* memory output data bus */
|
| 51 |
|
|
output [15:0] io_addr_out; /* i/o address bus */
|
| 52 |
|
|
output [15:0] mem_addr_out; /* memory address bus */
|
| 53 |
|
|
|
| 54 |
|
|
/*****************************************************************************************/
|
| 55 |
|
|
/* */
|
| 56 |
|
|
/* signal declarations */
|
| 57 |
|
|
/* */
|
| 58 |
|
|
/*****************************************************************************************/
|
| 59 |
|
|
wire ld_io_addr; /* update io address */
|
| 60 |
|
|
wire ld_mem_addr; /* update memory address */
|
| 61 |
|
|
wire [7:0] io_data_out; /* i/o output data bus */
|
| 62 |
|
|
wire [7:0] mem_data_out; /* memory output data bus */
|
| 63 |
|
|
|
| 64 |
|
|
reg dma_ack; /* dma acknowledge */
|
| 65 |
|
|
reg ftch_tran; /* inst fetch transaction */
|
| 66 |
|
|
reg halt_tran; /* halt transaction */
|
| 67 |
|
|
reg iack_tran; /* int ack transaction */
|
| 68 |
|
|
reg io_read; /* i/o read enable */
|
| 69 |
|
|
reg io_tran; /* i/o transaction */
|
| 70 |
|
|
reg io_strobe; /* i/o data strobe */
|
| 71 |
|
|
reg ivec_rd; /* interrupt vector enable */
|
| 72 |
|
|
reg mem_rd; /* memory read enable */
|
| 73 |
|
|
reg mem_tran; /* memory transaction */
|
| 74 |
|
|
reg mem_wr; /* memory write enable */
|
| 75 |
|
|
reg out_inh_reg; /* latched output inhibit */
|
| 76 |
|
|
reg reti_tran; /* reti transaction */
|
| 77 |
|
|
reg t1; /* first clock of transaction */
|
| 78 |
|
|
reg [7:0] data_in; /* data input bus */
|
| 79 |
|
|
reg [15:0] io_addr_out; /* i/o address bus */
|
| 80 |
|
|
reg [15:0] mem_addr_out; /* memory address bus */
|
| 81 |
|
|
|
| 82 |
|
|
/*****************************************************************************************/
|
| 83 |
|
|
/* */
|
| 84 |
|
|
/* misc signals & buses */
|
| 85 |
|
|
/* */
|
| 86 |
|
|
/*****************************************************************************************/
|
| 87 |
|
|
assign io_data_out = (out_inh_reg) ? 8'h00 : dout_io_reg;
|
| 88 |
|
|
assign mem_data_out = (out_inh_reg) ? 8'h00 : dout_mem_reg;
|
| 89 |
|
|
assign ld_io_addr = tran_sel[`TT_IO] || output_inh;
|
| 90 |
|
|
assign ld_mem_addr = tran_sel[`TT_IAK] || tran_sel[`TT_IDL] || tran_sel[`TT_IF] ||
|
| 91 |
|
|
tran_sel[`TT_MEM] || tran_sel[`TT_STK];
|
| 92 |
|
|
|
| 93 |
|
|
always @ (iack_tran or io_tran or io_data_in or ivec_data_in or mem_data_in) begin
|
| 94 |
|
|
case ({iack_tran, io_tran})
|
| 95 |
|
|
2'b01: data_in = io_data_in;
|
| 96 |
|
|
2'b10: data_in = ivec_data_in;
|
| 97 |
|
|
default: data_in = mem_data_in;
|
| 98 |
|
|
endcase
|
| 99 |
|
|
end
|
| 100 |
|
|
|
| 101 |
|
|
/*****************************************************************************************/
|
| 102 |
|
|
/* */
|
| 103 |
|
|
/* timing generation */
|
| 104 |
|
|
/* */
|
| 105 |
|
|
/*****************************************************************************************/
|
| 106 |
|
|
always @ (posedge clkc or negedge resetb) begin
|
| 107 |
|
|
if (!resetb) begin
|
| 108 |
|
|
dma_ack <= 1'b0;
|
| 109 |
|
|
ftch_tran <= 1'b0;
|
| 110 |
|
|
halt_tran <= 1'b0;
|
| 111 |
|
|
iack_tran <= 1'b0;
|
| 112 |
|
|
io_addr_out <= 16'h0000;
|
| 113 |
|
|
io_read <= 1'b0;
|
| 114 |
|
|
io_tran <= 1'b0;
|
| 115 |
|
|
mem_addr_out <= 16'h0000;
|
| 116 |
|
|
mem_tran <= 1'b0;
|
| 117 |
|
|
out_inh_reg <= 1'b0;
|
| 118 |
|
|
reti_tran <= 1'b0;
|
| 119 |
|
|
end
|
| 120 |
|
|
else if (|tran_sel) begin
|
| 121 |
|
|
dma_ack <= ld_dmaa && dmar_reg;
|
| 122 |
|
|
ftch_tran <= tran_sel[`TT_IF];
|
| 123 |
|
|
halt_tran <= halt_nxt;
|
| 124 |
|
|
iack_tran <= tran_sel[`TT_IAK];
|
| 125 |
|
|
if (ld_io_addr) io_addr_out <= (output_inh) ? 16'h0000 : addr_reg_in;
|
| 126 |
|
|
io_read <= tran_sel[`TT_IO] && rd_nxt;
|
| 127 |
|
|
io_tran <= tran_sel[`TT_IO];
|
| 128 |
|
|
if (ld_mem_addr) mem_addr_out <= (output_inh) ? 16'h0000 : addr_reg_in;
|
| 129 |
|
|
mem_tran <= (tran_sel[`TT_IDL] || tran_sel[`TT_IF] || tran_sel[`TT_MEM] ||
|
| 130 |
|
|
tran_sel[`TT_STK]) && !output_inh;
|
| 131 |
|
|
out_inh_reg <= output_inh;
|
| 132 |
|
|
reti_tran <= reti_nxt;
|
| 133 |
|
|
end
|
| 134 |
|
|
end
|
| 135 |
|
|
|
| 136 |
|
|
always @ (posedge clkc or negedge resetb) begin
|
| 137 |
|
|
if (!resetb) begin
|
| 138 |
|
|
io_strobe <= 1'b0;
|
| 139 |
|
|
ivec_rd <= 1'b0;
|
| 140 |
|
|
mem_rd <= 1'b0;
|
| 141 |
|
|
mem_wr <= 1'b0;
|
| 142 |
|
|
t1 <= 1'b0;
|
| 143 |
|
|
end
|
| 144 |
|
|
else begin
|
| 145 |
|
|
io_strobe <= io_tran && (rd_frst || wr_frst);
|
| 146 |
|
|
ivec_rd <= iack_tran && inta_frst;
|
| 147 |
|
|
mem_rd <= (if_frst || (mem_tran && rd_frst)) && ld_wait;
|
| 148 |
|
|
mem_wr <= mem_tran && wr_frst;
|
| 149 |
|
|
t1 <= |tran_sel && !(halt_nxt || dmar_reg);
|
| 150 |
|
|
end
|
| 151 |
|
|
end
|
| 152 |
|
|
|
| 153 |
|
|
endmodule
|
| 154 |
|
|
|
| 155 |
|
|
|
| 156 |
|
|
|
| 157 |
|
|
|
| 158 |
|
|
|
| 159 |
|
|
|
| 160 |
|
|
|
| 161 |
|
|
|
| 162 |
|
|
|
| 163 |
|
|
|
