Subversion Repositories yac

#include "board.h"

#include "support.h"

#include "uart.h"

#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)

#define WAIT_FOR_XMITR \

        do { \

                lsr = REG8(uart_base + UART_LSR); \

        } while ((lsr & BOTH_EMPTY) != BOTH_EMPTY)

#define WAIT_FOR_THRE \

        do { \

                lsr = REG8(uart_base + UART_LSR); \

        } while ((lsr & UART_LSR_THRE) != UART_LSR_THRE)

#define CHECK_FOR_CHAR (REG8(uart_base + UART_LSR) & UART_LSR_DR)

#define WAIT_FOR_CHAR \

   {\

    unsigned char lsr; \

        do { \

                lsr = REG8(uart_base + UART_LSR); \

        } while ((lsr & UART_LSR_DR) != UART_LSR_DR); \

   }

#define UART_TX_BUFF_LEN 32

#define UART_TX_BUFF_MASK (UART_TX_BUFF_LEN -1)

static unsigned long uart_base = 0;

char tx_buff[UART_TX_BUFF_LEN];

volatile int tx_level, rx_level;

void uart_init(unsigned long base)

{

        int divisor;

    uart_base = base;

        /* Reset receiver and transmiter */

        /* Set RX interrupt for each byte */

        REG8(uart_base + UART_FCR) = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_1;

        /* Enable RX interrupt

        REG8(uart_base + UART_IER) = UART_IER_RDI | UART_IER_THRI; */

        /* Set 8 bit char, 1 stop bit, no parity */

        REG8(uart_base + UART_LCR) = UART_LCR_WLEN8 & ~(UART_LCR_STOP | UART_LCR_PARITY);

        /* Set baud rate */

        divisor = IN_CLK/(16 * UART_BAUD_RATE);

        REG8(uart_base + UART_LCR) |= UART_LCR_DLAB;

        REG8(uart_base + UART_DLM) = (divisor >> 8) & 0x000000ff;

        REG8(uart_base + UART_DLL) = divisor & 0x000000ff;

        REG8(uart_base + UART_LCR) &= ~(UART_LCR_DLAB);

        return;

}

void uart_putc(char c)

{

        unsigned char lsr;

        WAIT_FOR_THRE;

        REG8(uart_base + UART_TX) = c;

        WAIT_FOR_XMITR;

}

void empty_RX( void )

{

  char c;

  while( CHECK_FOR_CHAR  )

        c = REG8(uart_base + UART_RX);

}

char uart_getc()

{

        char c;

    unsigned char lsr;

        do {

                lsr = REG8(uart_base + UART_LSR);

        } while ((lsr & UART_LSR_DR) != UART_LSR_DR);

        c = REG8(uart_base + UART_RX);

        return c;

}

void uart_interrupt()

{

        char lala;

        unsigned char interrupt_id;

        interrupt_id = REG8(uart_base + UART_IIR);

        if ( interrupt_id & UART_IIR_RDI )

        {

                lala = uart_getc();

                uart_putc(lala+1);

        }

}

void uart_write( char * p, size_t len )

{

  while( len-- )

  {

    uart_putc(*p++);

  }

}

void uart_print_str(char *p)

{

        while(*p != 0) {

                uart_putc(*p);

                p++;

        }

}

void uart_print_long(unsigned long ul)

{

        int i;

        char c;

        uart_print_str("0x");

        for(i=0; i<8; i++) {

                c = (char) (ul>>((7-i)*4)) & 0xf;

                if(c >= 0x0 && c<=0x9)

                        c += '0';

                else

                        c += 'a' - 10;

                uart_putc(c);

        }

}

void uart_print_short(unsigned long ul)

{

        int i;

        char c;

        char flag=0;

        uart_print_str("0x");

        for(i=0; i<8; i++) {

                c = (char) (ul>>((7-i)*4)) & 0xf;

                if(c >= 0x0 && c<=0x9)

                        c += '0';

                else

                        c += 'a' - 10;

                if ((c != '0') || (i==7))

                        flag=1;

                if(flag)

                        uart_putc(c);

        }

}