URL https://opencores.org/ocsvn/z80soc/z80soc/trunk

Subversion Repositories z80soc

[/] [z80soc/] [branches/] [RonivonCosta/] [DE1/] [rtl/] [VHDL/] [t80/] [T16450.vhd] - Blame information for rev 31

Details | Compare with Previous | View Log


--
-- 16450 compatible UART with synchronous bus interface
-- RClk/BaudOut is XIn enable instead of actual clock
--
-- Version : 0249b
--
-- Copyright (c) 2002 Daniel Wallner (jesus@opencores.org)
--
-- All rights reserved
--
-- Redistribution and use in source and synthezised forms, with or without
-- modification, are permitted provided that the following conditions are met:
--
-- Redistributions of source code must retain the above copyright notice,
-- this list of conditions and the following disclaimer.
--
-- Redistributions in synthesized form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- Neither the name of the author nor the names of other contributors may
-- be used to endorse or promote products derived from this software without
-- specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-- POSSIBILITY OF SUCH DAMAGE.
--
-- Please report bugs to the author, but before you do so, please
-- make sure that this is not a derivative work and that
-- you have the latest version of this file.
--
-- The latest version of this file can be found at:
--      http://www.opencores.org/cvsweb.shtml/t80/
--
-- Limitations :
--
-- File history :
--
-- 0208 : First release
--
-- 0249 : Fixed interrupt and baud rate bugs found by Andy Dyer
--        Added modem status and break detection
--        Added support for 1.5 and 2 stop bits
--
-- 0249b : Fixed loopback break generation bugs found by Andy Dyer
--
 
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
 
entity T16450 is
        port(
                MR_n            : in std_logic;
                XIn                     : in std_logic;
                RClk            : in std_logic;
                CS_n            : in std_logic;
                Rd_n            : in std_logic;
                Wr_n            : in std_logic;
                A                       : in std_logic_vector(2 downto 0);
                D_In            : in std_logic_vector(7 downto 0);
                D_Out           : out std_logic_vector(7 downto 0);
                SIn                     : in std_logic;
                CTS_n           : in std_logic;
                DSR_n           : in std_logic;
                RI_n            : in std_logic;
                DCD_n           : in std_logic;
                SOut            : out std_logic;
                RTS_n           : out std_logic;
                DTR_n           : out std_logic;
                OUT1_n          : out std_logic;
                OUT2_n          : out std_logic;
                BaudOut         : out std_logic;
                Intr            : out std_logic
        );
end T16450;
 
architecture rtl of T16450 is
 
        signal  RBR                             : std_logic_vector(7 downto 0);  -- Reciever Buffer Register
        signal  THR                             : std_logic_vector(7 downto 0);  -- Transmitter Holding Register
        signal  IER                             : std_logic_vector(7 downto 0);  -- Interrupt Enable Register
        signal  IIR                             : std_logic_vector(7 downto 0);  -- Interrupt Ident. Register
        signal  LCR                             : std_logic_vector(7 downto 0);  -- Line Control Register
        signal  MCR                             : std_logic_vector(7 downto 0);  -- MODEM Control Register
        signal  LSR                             : std_logic_vector(7 downto 0);  -- Line Status Register
        signal  MSR                             : std_logic_vector(7 downto 0);  -- MODEM Status Register
        signal  SCR                             : std_logic_vector(7 downto 0);  -- Scratch Register
        signal  DLL                             : std_logic_vector(7 downto 0);  -- Divisor Latch (LS)
        signal  DLM                             : std_logic_vector(7 downto 0);  -- Divisor Latch (MS)
 
        signal  DM0                             : std_logic_vector(7 downto 0);
        signal  DM1                             : std_logic_vector(7 downto 0);
 
        signal  MSR_In                  : std_logic_vector(3 downto 0);
 
        signal  Bit_Phase               : unsigned(3 downto 0);
        signal  Brk_Cnt                 : unsigned(3 downto 0);
        signal  RX_Filtered             : std_logic;
        signal  RX_ShiftReg             : std_logic_vector(7 downto 0);
        signal  RX_Bit_Cnt              : integer range 0 to 11;
        signal  RX_Parity               : std_logic;
        signal  RXD                             : std_logic;
 
        signal  TX_Tick                 : std_logic;
        signal  TX_ShiftReg             : std_logic_vector(7 downto 0);
        signal  TX_Bit_Cnt              : integer range 0 to 11;
        signal  TX_Parity               : std_logic;
        signal  TX_Next_Is_Stop : std_logic;
        signal  TX_Stop_Bit             : std_logic;
        signal  TXD                             : std_logic;
 
begin
 
        DTR_n <= MCR(4) or not MCR(0);
        RTS_n <= MCR(4) or not MCR(1);
        OUT1_n <= MCR(4) or not MCR(2);
        OUT2_n <= MCR(4) or not MCR(3);
        SOut <= MCR(4) or (TXD and not LCR(6));
        RXD <= SIn when MCR(4) = '0' else (TXD and not LCR(6));
 
        Intr <= not IIR(0);
 
        -- Registers
        DM0 <= DLL when LCR(7) = '1' else RBR;
        DM1 <= DLM when LCR(7) = '1' else IER;
        with A select
                D_Out <=
                        DM0 when "000",
                        DM1 when "001",
                        IIR when "010",
                        LCR when "011",
                        MCR when "100",
                        LSR when "101",
                        MSR when "110",
                        SCR when others;
        process (MR_n, XIn)
        begin
                if MR_n = '0' then
                        THR <= "00000000";
                        IER <= "00000000";
                        LCR <= "00000000";
                        MCR <= "00000000";
                        MSR(3 downto 0) <= "0000";
                        SCR <= "00000000"; -- ??
                        DLL <= "00000000"; -- ??
                        DLM <= "00000000"; -- ??
                elsif XIn'event and XIn = '1' then
                        if Wr_n = '0' and CS_n = '0' then
                                case A is
                                when "000" =>
                                        if LCR(7) = '1' then
                                                DLL <= D_In;
                                        else
                                                THR <= D_In;
                                        end if;
                                when "001" =>
                                        if LCR(7) = '1' then
                                                DLM <= D_In;
                                        else
                                                IER(3 downto 0) <= D_In(3 downto 0);
                                        end if;
                                when "011" =>
                                        LCR <= D_In;
                                when "100" =>
                                        MCR <= D_In;
                                when "111" =>
                                        SCR <= D_In;
                                when others =>
                                end case;
                        end if;
                        if Rd_n = '0' and CS_n = '0' and A = "110" then
                                MSR(3 downto 0) <= "0000";
                        end if;
                        if MSR(4) /= MSR_In(0) then
                                MSR(0) <= '1';
                        end if;
                        if MSR(5) /= MSR_In(1) then
                                MSR(1) <= '1';
                        end if;
                        if MSR(6) = '0' and MSR_In(2) = '1' then
                                MSR(2) <= '1';
                        end if;
                        if MSR(7) /= MSR_In(3) then
                                MSR(3) <= '1';
                        end if;
                end if;
        end process;
        process (XIn)
        begin
                if XIn'event and XIn = '1' then
                        if MCR(4) = '0' then
                                MSR(4) <= MSR_In(0);
                                MSR(5) <= MSR_In(1);
                                MSR(6) <= MSR_In(2);
                                MSR(7) <= MSR_In(3);
                        else
                                MSR(4) <= MCR(1);
                                MSR(5) <= MCR(0);
                                MSR(6) <= MCR(2);
                                MSR(7) <= MCR(3);
                        end if;
                        MSR_In(0) <= CTS_n;
                        MSR_In(1) <= DSR_n;
                        MSR_In(2) <= RI_n;
                        MSR_In(3) <= DCD_n;
                end if;
        end process;
 
        IIR(7 downto 3) <= "00000";
        IIR(2 downto 0) <=
                "110" when IER(2) = '1' and LSR(4 downto 1) /= "0000" else
                "100" when (IER(0) and LSR(0)) = '1' else
                "010" when (IER(1) and LSR(5)) = '1' else
                "000" when IER(3) = '1' and ((MCR(4) = '0' and MSR(3 downto 0) /= "0000") or
                                                                        (MCR(4) = '1' and MCR(3 downto 0) /= "0000")) else
                "001";
 
        -- Baud x 16 clock generator
        process (MR_n, XIn)
                variable Baud_Cnt : unsigned(15 downto 0);
        begin
                if MR_n = '0' then
                        Baud_Cnt := "0000000000000000";
                        BaudOut <= '0';
                elsif XIn'event and XIn = '1' then
                        if Baud_Cnt(15 downto 1) = "000000000000000" or (Wr_n = '0' and CS_n = '0' and A(2 downto 1) = "00" and LCR(7) = '1') then
                                Baud_Cnt(15 downto 8) := unsigned(DLM);
                                Baud_Cnt(7 downto 0) := unsigned(DLL);
                                BaudOut <= '1';
                        else
                                Baud_Cnt := Baud_Cnt - 1;
                                BaudOut <= '0';
                        end if;
                end if;
        end process;
 
        -- Input filter
        process (MR_n, XIn)
                variable Samples : std_logic_vector(1 downto 0);
        begin
                if MR_n = '0' then
                        Samples := "11";
                        RX_Filtered <= '1';
                elsif XIn'event and XIn = '1' then
                        if RClk = '1' then
                                Samples(1) := Samples(0);
                                Samples(0) := RXD;
                        end if;
                        if Samples = "00" then
                                RX_Filtered <= '0';
                        end if;
                        if Samples = "11" then
                                RX_Filtered <= '1';
                        end if;
                end if;
        end process;
 
        -- Receive state machine
        process (MR_n, XIn)
        begin
                if MR_n = '0' then
                        RBR <= "00000000";
                        LSR(4 downto 0) <= "00000";
                        Bit_Phase <= "0000";
                        Brk_Cnt <= "0000";
                        RX_ShiftReg(7 downto 0) <= "00000000";
                        RX_Bit_Cnt <= 0;
                        RX_Parity <= '0';
                elsif XIn'event and XIn = '1' then
                        if A = "000" and LCR(7) = '0' and Rd_n = '0' and CS_n = '0' then
                                LSR(0) <= '0';    -- DR
                        end if;
                        if A = "101" and Rd_n = '0' and CS_n = '0' then
                                LSR(4) <= '0';   -- BI
                                LSR(3) <= '0';   -- FE
                                LSR(2) <= '0';   -- PE
                                LSR(1) <= '0';   -- OE
                        end if;
                        if RClk = '1' then
                                if RX_Bit_Cnt = 0 and (RX_Filtered = '1' or Bit_Phase = "0111") then
                                        Bit_Phase <= "0000";
                                else
                                        Bit_Phase <= Bit_Phase + 1;
                                end if;
                                if Bit_Phase = "1111" then
                                        if RX_Filtered = '1' then
                                                Brk_Cnt <= "0000";
                                        else
                                                Brk_Cnt <= Brk_Cnt + 1;
                                        end if;
                                        if Brk_Cnt = "1100" then
                                                LSR(4) <= '1';  -- BI
                                        end if;
                                end if;
                                if RX_Bit_Cnt = 0 then
                                        if Bit_Phase = "0111" then
                                                RX_Bit_Cnt <= RX_Bit_Cnt + 1;
                                                RX_Parity <= not LCR(4);        -- EPS
                                        end if;
                                elsif Bit_Phase = "1111" then
                                        RX_Bit_Cnt <= RX_Bit_Cnt + 1;
                                        if RX_Bit_Cnt = 10 then -- Parity stop bit
                                                RX_Bit_Cnt <= 0;
                                                LSR(0) <= '1'; -- UART Receive complete
                                                LSR(3) <= not RX_Filtered; -- Framing error
                                        elsif (RX_Bit_Cnt = 9 and LCR(1 downto 0) = "11") or
                                                (RX_Bit_Cnt = 8 and LCR(1 downto 0) = "10") or
                                                (RX_Bit_Cnt = 7 and LCR(1 downto 0) = "01") or
                                                (RX_Bit_Cnt = 6 and LCR(1 downto 0) = "00") then -- Stop bit/Parity
                                                RX_Bit_Cnt <= 0;
                                                if LCR(3) = '1' then    -- PEN
                                                        RX_Bit_Cnt <= 10;
                                                        if LCR(5) = '1' then    -- Stick parity
                                                                if RX_Filtered = LCR(4) then
                                                                        LSR(2) <= '1';
                                                                end if;
                                                        else
                                                                if RX_Filtered /= RX_Parity then
                                                                        LSR(2) <= '1';
                                                                end if;
                                                        end if;
                                                else
                                                        LSR(0) <= '1'; -- UART Receive complete
                                                        LSR(3) <= not RX_Filtered; -- Framing error
                                                end if;
                                                RBR <= RX_ShiftReg(7 downto 0);
                                                LSR(1) <= LSR(0);
                                                if A = "101" and Rd_n = '0' and CS_n = '0' then
                                                        LSR(1) <= '0';
                                                end if;
                                        else
                                                RX_ShiftReg(6 downto 0) <= RX_ShiftReg(7 downto 1);
                                                RX_ShiftReg(7) <= RX_Filtered;
                                                if LCR(1 downto 0) = "10" then
                                                        RX_ShiftReg(7) <= '0';
                                                        RX_ShiftReg(6) <= RX_Filtered;
                                                end if;
                                                if LCR(1 downto 0) = "01" then
                                                        RX_ShiftReg(7) <= '0';
                                                        RX_ShiftReg(6) <= '0';
                                                        RX_ShiftReg(5) <= RX_Filtered;
                                                end if;
                                                if LCR(1 downto 0) = "00" then
                                                        RX_ShiftReg(7) <= '0';
                                                        RX_ShiftReg(6) <= '0';
                                                        RX_ShiftReg(5) <= '0';
                                                        RX_ShiftReg(4) <= RX_Filtered;
                                                end if;
                                                RX_Parity <= RX_Filtered xor RX_Parity;
                                        end if;
                                end if;
                        end if;
                end if;
        end process;
 
        -- Transmit bit tick
        process (MR_n, XIn)
                variable TX_Cnt : unsigned(4 downto 0);
        begin
                if MR_n = '0' then
                        TX_Cnt := "00000";
                        TX_Tick <= '0';
                elsif XIn'event and XIn = '1' then
                        TX_Tick <= '0';
                        if RClk = '1' then
                                TX_Cnt := TX_Cnt + 1;
                                if LCR(2) = '1' and TX_Stop_Bit = '1' then
                                        if LCR(1 downto 0) = "00" then
                                                if TX_Cnt = "10111" then
                                                        TX_Tick <= '1';
                                                        TX_Cnt(3 downto 0) := "0000";
                                                end if;
                                        else
                                                if TX_Cnt = "11111" then
                                                        TX_Tick <= '1';
                                                        TX_Cnt(3 downto 0) := "0000";
                                                end if;
                                        end if;
                                else
                                        TX_Cnt(4) := '1';
                                        if TX_Cnt(3 downto 0) = "1111" then
                                                TX_Tick <= '1';
                                        end if;
                                end if;
                        end if;
                end if;
        end process;
 
        -- Transmit state machine
        process (MR_n, XIn)
        begin
                if MR_n = '0' then
                        LSR(7 downto 5) <= "011";
                        TX_Bit_Cnt <= 0;
                        TX_ShiftReg <= (others => '0');
                        TXD <= '1';
                        TX_Parity <= '0';
                        TX_Next_Is_Stop <= '0';
                        TX_Stop_Bit <= '0';
                elsif XIn'event and XIn = '1' then
                        if TX_Tick = '1' then
                                TX_Next_Is_Stop <= '0';
                                TX_Stop_Bit <= TX_Next_Is_Stop;
                                case TX_Bit_Cnt is
                                when 0 =>
                                        if LSR(5) <= '0' then    -- THRE
                                                TX_Bit_Cnt <= 1;
                                        end if;
                                        TXD <= '1';
                                when 1 => -- Start bit
                                        TX_ShiftReg(7 downto 0) <= THR;
                                        LSR(5) <= '1';  -- THRE
                                        TXD <= '0';
                                        TX_Parity <= not LCR(4);        -- EPS
                                        TX_Bit_Cnt <= TX_Bit_Cnt + 1;
                                when 10 => -- Parity bit
                                        TXD <= TX_Parity;
                                        if LCR(5) = '1' then    -- Stick parity
                                                TXD <= not LCR(4);
                                        end if;
                                        TX_Bit_Cnt <= 0;
                                        TX_Next_Is_Stop <= '1';
                                when others =>
                                        TX_Bit_Cnt <= TX_Bit_Cnt + 1;
                                        if (TX_Bit_Cnt = 9 and LCR(1 downto 0) = "11") or
                                                (TX_Bit_Cnt = 8 and LCR(1 downto 0) = "10") or
                                                (TX_Bit_Cnt = 7 and LCR(1 downto 0) = "01") or
                                                (TX_Bit_Cnt = 6 and LCR(1 downto 0) = "00") then
                                                TX_Bit_Cnt <= 0;
                                                if LCR(3) = '1' then    -- PEN
                                                        TX_Bit_Cnt <= 10;
                                                else
                                                        TX_Next_Is_Stop <= '1';
                                                end if;
                                                LSR(6) <= '1';  -- TEMT
                                        end if;
                                        TXD <= TX_ShiftReg(0);
                                        TX_ShiftReg(6 downto 0) <= TX_ShiftReg(7 downto 1);
                                        TX_Parity <= TX_ShiftReg(0) xor TX_Parity;
                                end case;
                        end if;
                        if Wr_n = '0' and CS_n = '0' and A = "000" and LCR(7) = '0' then
                                LSR(5) <= '0';   -- THRE
                                LSR(6) <= '0';   -- TEMT
                        end if;
                end if;
        end process;
 
end;

Browse

Tools

Subversion Repositories z80soc

[/] [z80soc/] [branches/] [RonivonCosta/] [DE1/] [rtl/] [VHDL/] [t80/] [T16450.vhd] - Blame information for rev 31

Line No.	Rev	Author	Line
1	11	rrred	`--`
2			`-- 16450 compatible UART with synchronous bus interface`
3			`-- RClk/BaudOut is XIn enable instead of actual clock`
4			`--`
5			`-- Version : 0249b`
6			`--`
7			`-- Copyright (c) 2002 Daniel Wallner (jesus@opencores.org)`
8			`--`
9			`-- All rights reserved`
10			`--`
11			`-- Redistribution and use in source and synthezised forms, with or without`
12			`-- modification, are permitted provided that the following conditions are met:`
13			`--`
14			`-- Redistributions of source code must retain the above copyright notice,`
15			`-- this list of conditions and the following disclaimer.`
16			`--`
17			`-- Redistributions in synthesized form must reproduce the above copyright`
18			`-- notice, this list of conditions and the following disclaimer in the`
19			`-- documentation and/or other materials provided with the distribution.`
20			`--`
21			`-- Neither the name of the author nor the names of other contributors may`
22			`-- be used to endorse or promote products derived from this software without`
23			`-- specific prior written permission.`
24			`--`
25			`-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"`
26			`-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,`
27			`-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR`
28			`-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE`
29			`-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR`
30			`-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF`
31			`-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS`
32			`-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN`
33			`-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)`
34			`-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE`
35			`-- POSSIBILITY OF SUCH DAMAGE.`
36			`--`
37			`-- Please report bugs to the author, but before you do so, please`
38			`-- make sure that this is not a derivative work and that`
39			`-- you have the latest version of this file.`
40			`--`
41			`-- The latest version of this file can be found at:`
42			`-- http://www.opencores.org/cvsweb.shtml/t80/`
43			`--`
44			`-- Limitations :`
45			`--`
46			`-- File history :`
47			`--`
48			`-- 0208 : First release`
49			`--`
50			`-- 0249 : Fixed interrupt and baud rate bugs found by Andy Dyer`
51			`-- Added modem status and break detection`
52			`-- Added support for 1.5 and 2 stop bits`
53			`--`
54			`-- 0249b : Fixed loopback break generation bugs found by Andy Dyer`
55			`--`
56
57			`library IEEE;`
58			`use IEEE.std_logic_1164.all;`
59			`use IEEE.numeric_std.all;`
60
61			`entity T16450 is`
62			`port(`
63			`MR_n : in std_logic;`
64			`XIn : in std_logic;`
65			`RClk : in std_logic;`
66			`CS_n : in std_logic;`
67			`Rd_n : in std_logic;`
68			`Wr_n : in std_logic;`
69			`A : in std_logic_vector(2 downto 0);`
70			`D_In : in std_logic_vector(7 downto 0);`
71			`D_Out : out std_logic_vector(7 downto 0);`
72			`SIn : in std_logic;`
73			`CTS_n : in std_logic;`
74			`DSR_n : in std_logic;`
75			`RI_n : in std_logic;`
76			`DCD_n : in std_logic;`
77			`SOut : out std_logic;`
78			`RTS_n : out std_logic;`
79			`DTR_n : out std_logic;`
80			`OUT1_n : out std_logic;`
81			`OUT2_n : out std_logic;`
82			`BaudOut : out std_logic;`
83			`Intr : out std_logic`
84			`);`
85			`end T16450;`
86
87			`architecture rtl of T16450 is`
88
89			`signal RBR : std_logic_vector(7 downto 0); -- Reciever Buffer Register`
90			`signal THR : std_logic_vector(7 downto 0); -- Transmitter Holding Register`
91			`signal IER : std_logic_vector(7 downto 0); -- Interrupt Enable Register`
92			`signal IIR : std_logic_vector(7 downto 0); -- Interrupt Ident. Register`
93			`signal LCR : std_logic_vector(7 downto 0); -- Line Control Register`
94			`signal MCR : std_logic_vector(7 downto 0); -- MODEM Control Register`
95			`signal LSR : std_logic_vector(7 downto 0); -- Line Status Register`
96			`signal MSR : std_logic_vector(7 downto 0); -- MODEM Status Register`
97			`signal SCR : std_logic_vector(7 downto 0); -- Scratch Register`
98			`signal DLL : std_logic_vector(7 downto 0); -- Divisor Latch (LS)`
99			`signal DLM : std_logic_vector(7 downto 0); -- Divisor Latch (MS)`
100
101			`signal DM0 : std_logic_vector(7 downto 0);`
102			`signal DM1 : std_logic_vector(7 downto 0);`
103
104			`signal MSR_In : std_logic_vector(3 downto 0);`
105
106			`signal Bit_Phase : unsigned(3 downto 0);`
107			`signal Brk_Cnt : unsigned(3 downto 0);`
108			`signal RX_Filtered : std_logic;`
109			`signal RX_ShiftReg : std_logic_vector(7 downto 0);`
110			`signal RX_Bit_Cnt : integer range 0 to 11;`
111			`signal RX_Parity : std_logic;`
112			`signal RXD : std_logic;`
113
114			`signal TX_Tick : std_logic;`
115			`signal TX_ShiftReg : std_logic_vector(7 downto 0);`
116			`signal TX_Bit_Cnt : integer range 0 to 11;`
117			`signal TX_Parity : std_logic;`
118			`signal TX_Next_Is_Stop : std_logic;`
119			`signal TX_Stop_Bit : std_logic;`
120			`signal TXD : std_logic;`
121
122			`begin`
123
124			`DTR_n <= MCR(4) or not MCR(0);`
125			`RTS_n <= MCR(4) or not MCR(1);`
126			`OUT1_n <= MCR(4) or not MCR(2);`
127			`OUT2_n <= MCR(4) or not MCR(3);`
128			`SOut <= MCR(4) or (TXD and not LCR(6));`
129			`RXD <= SIn when MCR(4) = '0' else (TXD and not LCR(6));`
130
131			`Intr <= not IIR(0);`
132
133			`-- Registers`
134			`DM0 <= DLL when LCR(7) = '1' else RBR;`
135			`DM1 <= DLM when LCR(7) = '1' else IER;`
136			`with A select`
137			`D_Out <=`
138			`DM0 when "000",`
139			`DM1 when "001",`
140			`IIR when "010",`
141			`LCR when "011",`
142			`MCR when "100",`
143			`LSR when "101",`
144			`MSR when "110",`
145			`SCR when others;`
146			`process (MR_n, XIn)`
147			`begin`
148			`if MR_n = '0' then`
149			`THR <= "00000000";`
150			`IER <= "00000000";`
151			`LCR <= "00000000";`
152			`MCR <= "00000000";`
153			`MSR(3 downto 0) <= "0000";`
154			`SCR <= "00000000"; -- ??`
155			`DLL <= "00000000"; -- ??`
156			`DLM <= "00000000"; -- ??`
157			`elsif XIn'event and XIn = '1' then`
158			`if Wr_n = '0' and CS_n = '0' then`
159			`case A is`
160			`when "000" =>`
161			`if LCR(7) = '1' then`
162			`DLL <= D_In;`
163			`else`
164			`THR <= D_In;`
165			`end if;`
166			`when "001" =>`
167			`if LCR(7) = '1' then`
168			`DLM <= D_In;`
169			`else`
170			`IER(3 downto 0) <= D_In(3 downto 0);`
171			`end if;`
172			`when "011" =>`
173			`LCR <= D_In;`
174			`when "100" =>`
175			`MCR <= D_In;`
176			`when "111" =>`
177			`SCR <= D_In;`
178			`when others =>`
179			`end case;`
180			`end if;`
181			`if Rd_n = '0' and CS_n = '0' and A = "110" then`
182			`MSR(3 downto 0) <= "0000";`
183			`end if;`
184			`if MSR(4) /= MSR_In(0) then`
185			`MSR(0) <= '1';`
186			`end if;`
187			`if MSR(5) /= MSR_In(1) then`
188			`MSR(1) <= '1';`
189			`end if;`
190			`if MSR(6) = '0' and MSR_In(2) = '1' then`
191			`MSR(2) <= '1';`
192			`end if;`
193			`if MSR(7) /= MSR_In(3) then`
194			`MSR(3) <= '1';`
195			`end if;`
196			`end if;`
197			`end process;`
198			`process (XIn)`
199			`begin`
200			`if XIn'event and XIn = '1' then`
201			`if MCR(4) = '0' then`
202			`MSR(4) <= MSR_In(0);`
203			`MSR(5) <= MSR_In(1);`
204			`MSR(6) <= MSR_In(2);`
205			`MSR(7) <= MSR_In(3);`
206			`else`
207			`MSR(4) <= MCR(1);`
208			`MSR(5) <= MCR(0);`
209			`MSR(6) <= MCR(2);`
210			`MSR(7) <= MCR(3);`
211			`end if;`
212			`MSR_In(0) <= CTS_n;`
213			`MSR_In(1) <= DSR_n;`
214			`MSR_In(2) <= RI_n;`
215			`MSR_In(3) <= DCD_n;`
216			`end if;`
217			`end process;`
218
219			`IIR(7 downto 3) <= "00000";`
220			`IIR(2 downto 0) <=`
221			`"110" when IER(2) = '1' and LSR(4 downto 1) /= "0000" else`
222			`"100" when (IER(0) and LSR(0)) = '1' else`
223			`"010" when (IER(1) and LSR(5)) = '1' else`
224			`"000" when IER(3) = '1' and ((MCR(4) = '0' and MSR(3 downto 0) /= "0000") or`
225			`(MCR(4) = '1' and MCR(3 downto 0) /= "0000")) else`
226			`"001";`
227
228			`-- Baud x 16 clock generator`
229			`process (MR_n, XIn)`
230			`variable Baud_Cnt : unsigned(15 downto 0);`
231			`begin`
232			`if MR_n = '0' then`
233			`Baud_Cnt := "0000000000000000";`
234			`BaudOut <= '0';`
235			`elsif XIn'event and XIn = '1' then`
236			`if Baud_Cnt(15 downto 1) = "000000000000000" or (Wr_n = '0' and CS_n = '0' and A(2 downto 1) = "00" and LCR(7) = '1') then`
237			`Baud_Cnt(15 downto 8) := unsigned(DLM);`
238			`Baud_Cnt(7 downto 0) := unsigned(DLL);`
239			`BaudOut <= '1';`
240			`else`
241			`Baud_Cnt := Baud_Cnt - 1;`
242			`BaudOut <= '0';`
243			`end if;`
244			`end if;`
245			`end process;`
246
247			`-- Input filter`
248			`process (MR_n, XIn)`
249			`variable Samples : std_logic_vector(1 downto 0);`
250			`begin`
251			`if MR_n = '0' then`
252			`Samples := "11";`
253			`RX_Filtered <= '1';`
254			`elsif XIn'event and XIn = '1' then`
255			`if RClk = '1' then`
256			`Samples(1) := Samples(0);`
257			`Samples(0) := RXD;`
258			`end if;`
259			`if Samples = "00" then`
260			`RX_Filtered <= '0';`
261			`end if;`
262			`if Samples = "11" then`
263			`RX_Filtered <= '1';`
264			`end if;`
265			`end if;`
266			`end process;`
267
268			`-- Receive state machine`
269			`process (MR_n, XIn)`
270			`begin`
271			`if MR_n = '0' then`
272			`RBR <= "00000000";`
273			`LSR(4 downto 0) <= "00000";`
274			`Bit_Phase <= "0000";`
275			`Brk_Cnt <= "0000";`
276			`RX_ShiftReg(7 downto 0) <= "00000000";`
277			`RX_Bit_Cnt <= 0;`
278			`RX_Parity <= '0';`
279			`elsif XIn'event and XIn = '1' then`
280			`if A = "000" and LCR(7) = '0' and Rd_n = '0' and CS_n = '0' then`
281			`LSR(0) <= '0'; -- DR`
282			`end if;`
283			`if A = "101" and Rd_n = '0' and CS_n = '0' then`
284			`LSR(4) <= '0'; -- BI`
285			`LSR(3) <= '0'; -- FE`
286			`LSR(2) <= '0'; -- PE`
287			`LSR(1) <= '0'; -- OE`
288			`end if;`
289			`if RClk = '1' then`
290			`if RX_Bit_Cnt = 0 and (RX_Filtered = '1' or Bit_Phase = "0111") then`
291			`Bit_Phase <= "0000";`
292			`else`
293			`Bit_Phase <= Bit_Phase + 1;`
294			`end if;`
295			`if Bit_Phase = "1111" then`
296			`if RX_Filtered = '1' then`
297			`Brk_Cnt <= "0000";`
298			`else`
299			`Brk_Cnt <= Brk_Cnt + 1;`
300			`end if;`
301			`if Brk_Cnt = "1100" then`
302			`LSR(4) <= '1'; -- BI`
303			`end if;`
304			`end if;`
305			`if RX_Bit_Cnt = 0 then`
306			`if Bit_Phase = "0111" then`
307			`RX_Bit_Cnt <= RX_Bit_Cnt + 1;`
308			`RX_Parity <= not LCR(4); -- EPS`
309			`end if;`
310			`elsif Bit_Phase = "1111" then`
311			`RX_Bit_Cnt <= RX_Bit_Cnt + 1;`
312			`if RX_Bit_Cnt = 10 then -- Parity stop bit`
313			`RX_Bit_Cnt <= 0;`
314			`LSR(0) <= '1'; -- UART Receive complete`
315			`LSR(3) <= not RX_Filtered; -- Framing error`
316			`elsif (RX_Bit_Cnt = 9 and LCR(1 downto 0) = "11") or`
317			`(RX_Bit_Cnt = 8 and LCR(1 downto 0) = "10") or`
318			`(RX_Bit_Cnt = 7 and LCR(1 downto 0) = "01") or`
319			`(RX_Bit_Cnt = 6 and LCR(1 downto 0) = "00") then -- Stop bit/Parity`
320			`RX_Bit_Cnt <= 0;`
321			`if LCR(3) = '1' then -- PEN`
322			`RX_Bit_Cnt <= 10;`
323			`if LCR(5) = '1' then -- Stick parity`
324			`if RX_Filtered = LCR(4) then`
325			`LSR(2) <= '1';`
326			`end if;`
327			`else`
328			`if RX_Filtered /= RX_Parity then`
329			`LSR(2) <= '1';`
330			`end if;`
331			`end if;`
332			`else`
333			`LSR(0) <= '1'; -- UART Receive complete`
334			`LSR(3) <= not RX_Filtered; -- Framing error`
335			`end if;`
336			`RBR <= RX_ShiftReg(7 downto 0);`
337			`LSR(1) <= LSR(0);`
338			`if A = "101" and Rd_n = '0' and CS_n = '0' then`
339			`LSR(1) <= '0';`
340			`end if;`
341			`else`
342			`RX_ShiftReg(6 downto 0) <= RX_ShiftReg(7 downto 1);`
343			`RX_ShiftReg(7) <= RX_Filtered;`
344			`if LCR(1 downto 0) = "10" then`
345			`RX_ShiftReg(7) <= '0';`
346			`RX_ShiftReg(6) <= RX_Filtered;`
347			`end if;`
348			`if LCR(1 downto 0) = "01" then`
349			`RX_ShiftReg(7) <= '0';`
350			`RX_ShiftReg(6) <= '0';`
351			`RX_ShiftReg(5) <= RX_Filtered;`
352			`end if;`
353			`if LCR(1 downto 0) = "00" then`
354			`RX_ShiftReg(7) <= '0';`
355			`RX_ShiftReg(6) <= '0';`
356			`RX_ShiftReg(5) <= '0';`
357			`RX_ShiftReg(4) <= RX_Filtered;`
358			`end if;`
359			`RX_Parity <= RX_Filtered xor RX_Parity;`
360			`end if;`
361			`end if;`
362			`end if;`
363			`end if;`
364			`end process;`
365
366			`-- Transmit bit tick`
367			`process (MR_n, XIn)`
368			`variable TX_Cnt : unsigned(4 downto 0);`
369			`begin`
370			`if MR_n = '0' then`
371			`TX_Cnt := "00000";`
372			`TX_Tick <= '0';`
373			`elsif XIn'event and XIn = '1' then`
374			`TX_Tick <= '0';`
375			`if RClk = '1' then`
376			`TX_Cnt := TX_Cnt + 1;`
377			`if LCR(2) = '1' and TX_Stop_Bit = '1' then`
378			`if LCR(1 downto 0) = "00" then`
379			`if TX_Cnt = "10111" then`
380			`TX_Tick <= '1';`
381			`TX_Cnt(3 downto 0) := "0000";`
382			`end if;`
383			`else`
384			`if TX_Cnt = "11111" then`
385			`TX_Tick <= '1';`
386			`TX_Cnt(3 downto 0) := "0000";`
387			`end if;`
388			`end if;`
389			`else`
390			`TX_Cnt(4) := '1';`
391			`if TX_Cnt(3 downto 0) = "1111" then`
392			`TX_Tick <= '1';`
393			`end if;`
394			`end if;`
395			`end if;`
396			`end if;`
397			`end process;`
398
399			`-- Transmit state machine`
400			`process (MR_n, XIn)`
401			`begin`
402			`if MR_n = '0' then`
403			`LSR(7 downto 5) <= "011";`
404			`TX_Bit_Cnt <= 0;`
405			`TX_ShiftReg <= (others => '0');`
406			`TXD <= '1';`
407			`TX_Parity <= '0';`
408			`TX_Next_Is_Stop <= '0';`
409			`TX_Stop_Bit <= '0';`
410			`elsif XIn'event and XIn = '1' then`
411			`if TX_Tick = '1' then`
412			`TX_Next_Is_Stop <= '0';`
413			`TX_Stop_Bit <= TX_Next_Is_Stop;`
414			`case TX_Bit_Cnt is`
415			`when 0 =>`
416			`if LSR(5) <= '0' then -- THRE`
417			`TX_Bit_Cnt <= 1;`
418			`end if;`
419			`TXD <= '1';`
420			`when 1 => -- Start bit`
421			`TX_ShiftReg(7 downto 0) <= THR;`
422			`LSR(5) <= '1'; -- THRE`
423			`TXD <= '0';`
424			`TX_Parity <= not LCR(4); -- EPS`
425			`TX_Bit_Cnt <= TX_Bit_Cnt + 1;`
426			`when 10 => -- Parity bit`
427			`TXD <= TX_Parity;`
428			`if LCR(5) = '1' then -- Stick parity`
429			`TXD <= not LCR(4);`
430			`end if;`
431			`TX_Bit_Cnt <= 0;`
432			`TX_Next_Is_Stop <= '1';`
433			`when others =>`
434			`TX_Bit_Cnt <= TX_Bit_Cnt + 1;`
435			`if (TX_Bit_Cnt = 9 and LCR(1 downto 0) = "11") or`
436			`(TX_Bit_Cnt = 8 and LCR(1 downto 0) = "10") or`
437			`(TX_Bit_Cnt = 7 and LCR(1 downto 0) = "01") or`
438			`(TX_Bit_Cnt = 6 and LCR(1 downto 0) = "00") then`
439			`TX_Bit_Cnt <= 0;`
440			`if LCR(3) = '1' then -- PEN`
441			`TX_Bit_Cnt <= 10;`
442			`else`
443			`TX_Next_Is_Stop <= '1';`
444			`end if;`
445			`LSR(6) <= '1'; -- TEMT`
446			`end if;`
447			`TXD <= TX_ShiftReg(0);`
448			`TX_ShiftReg(6 downto 0) <= TX_ShiftReg(7 downto 1);`
449			`TX_Parity <= TX_ShiftReg(0) xor TX_Parity;`
450			`end case;`
451			`end if;`
452			`if Wr_n = '0' and CS_n = '0' and A = "000" and LCR(7) = '0' then`
453			`LSR(5) <= '0'; -- THRE`
454			`LSR(6) <= '0'; -- TEMT`
455			`end if;`
456			`end if;`
457			`end process;`
458
459			`end;`