Subversion Repositories z80soc

--

-- T80 Registers, technology independent

--

-- Version : 0244

--

-- Copyright (c) 2002 Daniel Wallner (jesus@opencores.org)

--

-- All rights reserved

--

-- Redistribution and use in source and synthezised forms, with or without

-- modification, are permitted provided that the following conditions are met:

--

-- Redistributions of source code must retain the above copyright notice,

-- this list of conditions and the following disclaimer.

--

-- Redistributions in synthesized form must reproduce the above copyright

-- notice, this list of conditions and the following disclaimer in the

-- documentation and/or other materials provided with the distribution.

--

-- Neither the name of the author nor the names of other contributors may

-- be used to endorse or promote products derived from this software without

-- specific prior written permission.

--

-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE

-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-- POSSIBILITY OF SUCH DAMAGE.

--

-- Please report bugs to the author, but before you do so, please

-- make sure that this is not a derivative work and that

-- you have the latest version of this file.

--

-- The latest version of this file can be found at:

--      http://www.opencores.org/cvsweb.shtml/t51/

--

-- Limitations :

--

-- File history :

--

--      0242 : Initial release

--

--      0244 : Changed to single register file

--

library IEEE;

use IEEE.std_logic_1164.all;

use IEEE.numeric_std.all;

entity T80_Reg is

        port(

                Clk                     : in std_logic;

                CEN                     : in std_logic;

                WEH                     : in std_logic;

                WEL                     : in std_logic;

                AddrA           : in std_logic_vector(2 downto 0);

                AddrB           : in std_logic_vector(2 downto 0);

                AddrC           : in std_logic_vector(2 downto 0);

                DIH                     : in std_logic_vector(7 downto 0);

                DIL                     : in std_logic_vector(7 downto 0);

                DOAH            : out std_logic_vector(7 downto 0);

                DOAL            : out std_logic_vector(7 downto 0);

                DOBH            : out std_logic_vector(7 downto 0);

                DOBL            : out std_logic_vector(7 downto 0);

                DOCH            : out std_logic_vector(7 downto 0);

                DOCL            : out std_logic_vector(7 downto 0)

        );

end T80_Reg;

architecture rtl of T80_Reg is

        type Register_Image is array (natural range <>) of std_logic_vector(7 downto 0);

        signal  RegsH   : Register_Image(0 to 7);

        signal  RegsL   : Register_Image(0 to 7);

begin

        process (Clk)

        begin

                if Clk'event and Clk = '1' then

                        if CEN = '1' then

                                if WEH = '1' then

                                        RegsH(to_integer(unsigned(AddrA))) <= DIH;

                                end if;

                                if WEL = '1' then

                                        RegsL(to_integer(unsigned(AddrA))) <= DIL;

                                end if;

                        end if;

                end if;

        end process;

        DOAH <= RegsH(to_integer(unsigned(AddrA)));

        DOAL <= RegsL(to_integer(unsigned(AddrA)));

        DOBH <= RegsH(to_integer(unsigned(AddrB)));

        DOBL <= RegsL(to_integer(unsigned(AddrB)));

        DOCH <= RegsH(to_integer(unsigned(AddrC)));

        DOCL <= RegsL(to_integer(unsigned(AddrC)));

end;