URL https://opencores.org/ocsvn/z80soc/z80soc/trunk

Subversion Repositories z80soc

[/] [z80soc/] [branches/] [RonivonCosta/] [doc/] [README.txt] - Blame information for rev 44

Go to most recent revision | Details | Compare with Previous | View Log


Z80 Computer on DE1 Development board
 
Arquitecture
------------
 
 
SW9     - Reserved - Reset
SW8     - Reserved
LEDR9   - Reserved
LEDR8   - Reserved
 
Memory
------
0000H - 01FFH - ROM             (0      - 8191)
2000H - 3FFFH - VIDEO RAM       (8192   - 16383)
4000H - FFFFH - RAM             (16384  - 65535)
 
IO
--
 
Output Ports
------------
01H     - Green Leds (7-0)
02H     - Red Leds (7-0)
 
10H     - HEX1 - HEX0
11H     - HEX3 - HEX2
 
 
 
Inputs
------
20H     - SW(7-0)
 
30H     - KEY(3-0)
 
Video
-----
2000h   - 1FFFH         Video RAM Memory
2000h   - 24B0H         Text Video memory
 
Keyboard
--------
80H     - Read Keyboard Ascii code
 
Input/Output
------------
 
All write operations to GPIO are buffered.
To write the buffered signals to the pins, the Z80 must
write any value to port C0 (GPIO0) or C1 (GPIO1)
 
A0      - GPIO0 (7-0)
A1      - GPIO0 (15-8)
A2      - GPIO0 (23-16)
A3      - GPIO0 (31-24)
A4      - GPIO0 (35-32)
 
B0      - GPIO1 (7-0)
B1      - GPIO1 (15-8)
B2      - GPIO1 (23-16)
B3      - GPIO1 (31-24)
B4      - GPIO1 (35-32)
 
C0      - GPIO0 Write
C1      - GPIO1 Write
 
 
--
 
Reference Sample ROM
 
It is provided a ROM with a reference application, and the correspnding
Z80 source codes.
 
To use the application you will need to connect the DE1 board to a
VGA monitor and PS/2 keyboard.
 
The program will show how to use:
        Input push buttons
        Input Switches
        PS/2 keyboard
        Video text out
        Leds
        7seg display
 
The program starts waiting for keys to be typed in the keyboard.
The characters are shown on the 40x30 video (VGA).
If "A" is pressed, then the program starts another routine,
that will write bytes into SRAM. After 255 bytes are written,
the bytes are read sequencially.
The address read are displayed in the seven seg display, and
the byte read displayed in the leds (binary format).
When finished, waits for KEY0 (DE1 board) and then restart again.
 
The switches (7-0) are used as input to calculate delays. Try
changing these switches to speed up ou slow down the leds. It only
takes effect after a Z80 reset.
To reset the Z80, use SW9.
 
Hope you enjoy.
 
TO-DO:
----
 
- Expand the character sets (this versions have only uppercase letters and numbers)
- 80x40 Video display
- Serial communication
- Monitor program to allow download of programs by serial communication
- Mass storage device (SD/MMC)
- Video colors

Line No.	Rev	Author	Line
1	2	rrred	`Z80 Computer on DE1 Development board`
2
3			`Arquitecture`
4			`------------`
5
6
7			`SW9 - Reserved - Reset`
8			`SW8 - Reserved`
9			`LEDR9 - Reserved`
10			`LEDR8 - Reserved`
11
12			`Memory`
13			`------`
14			`0000H - 01FFH - ROM (0 - 8191)`
15			`2000H - 3FFFH - VIDEO RAM (8192 - 16383)`
16			`4000H - FFFFH - RAM (16384 - 65535)`
17
18			`IO`
19			`--`
20
21			`Output Ports`
22			`------------`
23			`01H - Green Leds (7-0)`
24			`02H - Red Leds (7-0)`
25
26			`10H - HEX1 - HEX0`
27			`11H - HEX3 - HEX2`
28
29
30
31			`Inputs`
32			`------`
33			`20H - SW(7-0)`
34
35			`30H - KEY(3-0)`
36
37			`Video`
38			`-----`
39			`2000h - 1FFFH Video RAM Memory`
40			`2000h - 24B0H Text Video memory`
41
42			`Keyboard`
43			`--------`
44			`80H - Read Keyboard Ascii code`
45
46			`Input/Output`
47			`------------`
48
49			`All write operations to GPIO are buffered.`
50			`To write the buffered signals to the pins, the Z80 must`
51			`write any value to port C0 (GPIO0) or C1 (GPIO1)`
52
53			`A0 - GPIO0 (7-0)`
54			`A1 - GPIO0 (15-8)`
55			`A2 - GPIO0 (23-16)`
56			`A3 - GPIO0 (31-24)`
57			`A4 - GPIO0 (35-32)`
58
59			`B0 - GPIO1 (7-0)`
60			`B1 - GPIO1 (15-8)`
61			`B2 - GPIO1 (23-16)`
62			`B3 - GPIO1 (31-24)`
63			`B4 - GPIO1 (35-32)`
64
65			`C0 - GPIO0 Write`
66			`C1 - GPIO1 Write`
67
68
69			`--`
70
71			`Reference Sample ROM`
72
73			`It is provided a ROM with a reference application, and the correspnding`
74			`Z80 source codes.`
75
76			`To use the application you will need to connect the DE1 board to a`
77			`VGA monitor and PS/2 keyboard.`
78
79			`The program will show how to use:`
80			`Input push buttons`
81			`Input Switches`
82			`PS/2 keyboard`
83			`Video text out`
84			`Leds`
85			`7seg display`
86
87			`The program starts waiting for keys to be typed in the keyboard.`
88			`The characters are shown on the 40x30 video (VGA).`
89			`If "A" is pressed, then the program starts another routine,`
90			`that will write bytes into SRAM. After 255 bytes are written,`
91			`the bytes are read sequencially.`
92			`The address read are displayed in the seven seg display, and`
93			`the byte read displayed in the leds (binary format).`
94			`When finished, waits for KEY0 (DE1 board) and then restart again.`
95
96			`The switches (7-0) are used as input to calculate delays. Try`
97			`changing these switches to speed up ou slow down the leds. It only`
98			`takes effect after a Z80 reset.`
99			`To reset the Z80, use SW9.`
100
101			`Hope you enjoy.`
102
103			`TO-DO:`
104			`----`
105
106	11	rrred	`- Expand the character sets (this versions have only uppercase letters and numbers)`
107	2	rrred	`- 80x40 Video display`
108			`- Serial communication`
109			`- Monitor program to allow download of programs by serial communication`
110			`- Mass storage device (SD/MMC)`
111			`- Video colors`

Browse

Tools

Subversion Repositories z80soc

[/] [z80soc/] [branches/] [RonivonCosta/] [doc/] [README.txt] - Blame information for rev 44