URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk
Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [bench/] [asm/] [zipdhry.S] - Blame information for rev 43

Go to most recent revision | Details | Compare with Previous | View Log

// Under Verilator:
//      DMIPS:          25.57   100 MHz         0.26
// For comparison:
//      uBlaze:         255     177 MHz         1.44
//      LEON3                                   1.4
//      NiOS II:        218     185 MHz         1.16
//      OpenRisk        250     250 MHz         1.00
//      LM32                                    1.14
//      ZPU             2.6      50 MHz         0.05
//
 
// #define      NO_LOOP_UNROLLING
#define SKIP_SHORT_CIRCUITS
        sys.ctr.mtask   equ     0xc0000008
// int main(int argc, char **argv) {
//      dhrystone();
// }
entry:
        MOV     top_of_stack(PC),uSP
        MOV     entry(PC),uR12
        ; Store  our tick counter in R1
        LDI     sys.ctr.mtask,R1
        ; And start with our counter cleared at zero
        CLR     R0
        STO     R0,(R1)
#ifdef  SUPERVISOR_TASK
        MOV     __HERE__+3(PC),R0
        STO     R0,1(SP)
        BRA     dhrystone
#else
        MOV     dhrystone(PC),uPC
        RTU
#endif
        ; Read the tick counter back out
        LOD     (R1),R0
        HALT    ; Stop the CPU--We're done!!!!!!!
 
// typedef      enum { Ident_1, Ident_2, Ident_3, Ident_4, Ident_5 } test_enum;
// typedef      enum { false, true } bool;
 
// typedef      int     Arr_1_Dim[50];
// typedef      int     Arr_2_Dim[50][50];
#define RECSIZE 35
#define NUMBER_OF_RUNS  (512)
        ptr_comp                        equ     0
        discr                           equ     1
        variant.var_1.enum_comp         equ     2
        variant.var_1.int_comp          equ     3
        variant.var_1.str_comp          equ     4
 
gbl_arr_1:
        fill    50,0
gbl_arr_2:
        fill    2500,0
gbl_ch:
        word    0
gbl_ch_2:
        word    0
gbl_bool:
        word    0
gbl_int:
        word    0
gbl_ptr:
        word    0
// Arr_1_Dim    gbl_arr_1;
// Arr_2_Dim    gbl_arr_2;
// char gbl_ch, gbl_ch_2;
// bool gbl_bool;
// int  gbl_int;
// RECP gbl_ptr;
 
//char  *lcl_strcpy(char *d, char *s) {
//      char    *cpd = d, ch;
//
//      do{
//              *cpd++ = ch = *s++;
//      } while(ch);
//
//}
//
lcl_strcpy:
        ; R0 = d
        ; R1 = s
        ; R3 = ch
#ifdef  NO_LOOP_UNROLLING
copy_next_char:
        LOD     (R1),R2
        STO     R2,(R0)
        ADD     1,R0
        ADD     1,R1
        CMP     0,R2
        BNZ     copy_next_char
#else
copy_next_char:
        LOD     (R1),R2
        CMP     0,R2
        STO     R2,(R0)
        BZ      lcl_strcpy_end_of_loop
        LOD     1(R1),R2
        CMP     0,R2
        STO     R2,1(R0)
        BZ      lcl_strcpy_end_of_loop
        LOD     2(R1),R2
        CMP     0,R2
        STO     R2,2(R0)
        BZ      lcl_strcpy_end_of_loop
        LOD     3(R1),R2
        CMP     0,R2
        STO     R2,3(R0)
        BZ      lcl_strcpy_end_of_loop
        ADD     4,R0
        ADD     4,R1
        CMP     0,R2
        BNZ     copy_next_char
lcl_strcpy_end_of_loop:
#endif
        RETN
 
//int   lcl_strcmp(char *s1, char *s2) {
//      char    a, b;
//      do {
//              a = *s1++; b = *s2++;
//      } while((a)&&(a==b));
//
//      return a-b;
//}
 
lcl_strcmp:
        SUB     1,SP
        STO     R3,1(SP)
 
strcmp_top_of_loop:
#ifdef  NO_LOOP_UNROLLING
        LOD     (R0),R2
        LOD     (R1),R3                 ; Alternate approach:
        ; CMP   R2,R3                   ;       CMP     0,R2
        ; BNZ   strcmp_end_loop         ;       BZ      strcmp_end_loop
        ; CMP   0,R2                    ;       CMP     R2,R3
        ; BZ    strcmp_end_loop         ;       BZ      strcmp_top_of_loop
        ; CMP   0,R3                    ;
        ; BZ    strcmp_end_loop         ;
        ; ADD   1,R0
        ; ADD   1,R1
        ; BRA   strcmp_top_of_loop
        LOD     (R0),R2
        LOD     (R1),R3
        CMP     0,R2
        BZ      strcmp_end_loop
        CMP     R2,R3
        BZ      strcmp_top_of_loop
#else
        LOD     (R0),R2
        LOD     (R1),R3
        CMP     0,R2
        BZ      strcmp_end_loop
        CMP     R2,R3
        BNZ     strcmp_end_loop
        LOD     1(R0),R2
        LOD     1(R1),R3
        CMP     0,R2
        BZ      strcmp_end_loop
        CMP     R2,R3
        BNZ     strcmp_end_loop
        LOD     2(R0),R2
        LOD     2(R1),R3
        CMP     0,R2
        BZ      strcmp_end_loop
        CMP     R2,R3
        BNZ     strcmp_end_loop
        LOD     3(R0),R2
        LOD     3(R1),R3
        CMP     0,R2
        BZ      strcmp_end_loop
        CMP     R2,R3
        BNZ     strcmp_end_loop
        ADD     4,R0
        ADD     4,R1
        BRA     strcmp_top_of_loop
#endif
 
strcmp_end_loop:
        SUB     R3,R2
        MOV     R2,R0
 
        LOD     1(SP),R3
        ADD     1,SP
        RETN
 
 
//test_enum     func_1(char ch_1, char ch_2) {
//      char    lcl_ch_1, lcl_ch_2;
//
//      lcl_ch_1 = ch_1;
//      lcl_ch_2 = lcl_ch_1;
//      if (lcl_ch_2 != ch_2)
//              return 0;
//      else {
//              gbl_ch = lcl_ch_1;
//              return 1;
//      }
 
#ifdef  NO_INLINE
func_1:
        ; On input,
        ; R0 = ch_1
        ; R1 = ch_2
        ; R2 = available
        ; On output, R0 is our return value
 
        MOV     R0,R2
        CMP     R2,R1
        CLR.NZ  R0
        STO.Z   R2,gbl_ch(R12)
        LDILO.Z 1,R0
        RETN
#endif
 
//bool  func_2(char *str_1, char *str_2) {
//      int     lcl_int;
//      char    lcl_ch;
//
//      lcl_int = 2;
//      while(lcl_int <= 2) {
//              if (func_1(str_1[lcl_int], str_2[lcl_int+1])==0) {
//                      lcl_ch = 'A';
//                      lcl_int ++;
//              }
//      }
//
//      if ((lcl_ch >= 'W')&&(lcl_ch < 'Z'))
//              lcl_int = 7;
//      if (lcl_ch == 'R')
//              return true;
//      else {
//              if (lcl_strcmp(str_1, str_2)>0) {
//                      lcl_int += 7;
//                      gbl_int = lcl_int;
//              } else
//                      return false;
//      }
//}
func_2:
        ;
        SUB     6,SP
        STO     R3,2(SP)
        STO     R4,3(SP)
        STO     R5,4(SP)
        STO     R6,5(SP)
        STO     R7,6(SP)
 
        MOV     R0,R3   ; R3 = str_1
        MOV     R1,R4   ; R4 = str_2
        LDI     2,R5    ; R5 = lcl_int
        LDI     'A',R7  ; R7 = lcl_ch
func_2_while_loop:
        CMP     2,R5
        BGT     func_2_end_while_loop
func_2_top_while_loop:
        MOV     R3,R6
        ADD     R5,R6
 
#ifdef  NO_INLINE
        LOD     (R6),R0
        MOV     R4,R6
        ADD     R5,R6
        LOD     1(R6),R1
 
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     func_1
 
        CMP     0,R0
        ADD.Z   1,R5
#else
        LOD     (R6),R2
        MOV     R4,R6
        ADD     R5,R6
        LOD     1(R6),R1
 
        CMP     R2,R1
        STO.Z   R2,gbl_ch(R12)
        LDILO.Z 1,R0
 
        ADD.NZ  1,R5
#endif
 
#ifndef SKIP_SHORT_CIRCUITS
        BUSY.NZ
#endif
        CMP     3,R5
#ifndef SKIP_SHORT_CIRCUITS
        BUSY.LT
#endif
        BLT     func_2_top_while_loop
 
func_2_end_while_loop:
 
        // CMP  'W',R7                  // BUT! We know lcl_ch='A'
        // BLT  skip_if                 // So we can skip this
        // CMP  'Z',R7                  // entire  section
        // LDI.LT       7,R5
        // CMP  'R',R7
        // BNZ alt_if_case
        // LLO.Z        1,R0
        // BRA  func_2_return_and_cleanup
        //
        MOV     R3,R0
        MOV     R4,R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     lcl_strcmp
        CMP     0,R0
        BGT     func_2_final_then
#ifndef SKIP_SHORT_CIRCUITS
        BUSY
#endif
        CLR     R0
        BRA     func_2_return_and_cleanup
func_2_final_then:
        // ADD  7,R5            ; Never read, so useless code
        LDI     1,R0
#ifndef SKIP_SHORT_CIRCUITS
        BUSY
#endif
func_2_return_and_cleanup:
 
        LOD     2(SP),R3
        LOD     3(SP),R4
        LOD     4(SP),R5
        LOD     5(SP),R6
        LOD     6(SP),R7
        ADD     6,SP
        RETN
 
//bool  func_3(test_enum a) {
//      test_enum       lcl_enum;
//
//      lcl_enum = a;
//      if (lcl_enum == Ident_3)
//              return true;
//      else
//              return false;
//}
 
#ifdef  NO_INLINE
func_3:
        ; On entry,
        ;  R0 = a
        ;  R1 - available
        CMP     2,R0
        CLR             R0      ; CLR Doesn't set flags
        LDILO.Z         1,R0
        RETN
#endif
 
 
// void proc_6(test_enum ev, test_enum *ep) {
//      *ep = ev;
//      if (!func_3(ev))
//              *ep = 3;
//      switch(ev) {
//              case 0: *ep = 0; break;
//              case 1:
//                      if (gbl_int > 100)
//                              *ep = 0;
//                      else
//                              *ep = 3;
//                      break;
//              case 2:
//                      *ep = 1;
//                      break;
//              case 3:
//                      break;
//              case 4:
//                      *ep = 2;
//      }
//}
 
proc_6:
        ; On entry:
        ;       R0 = ev
        ;       R1 = ep
        ;       R2 - unassigned
        ; Since we call func_3, we have to reserve R0 and R1
        ; for other purposes.  Thus
        ;       R2 = ev
        ;       R3 = ep
        SUB     2,SP
        STO     R3,2(SP)
 
        MOV     R1,R3
        MOV     R0,R2
        ; *ep = ev
        STO     R0,(R1)
#ifndef SKIP_SHORT_CIRCUITS
        CMP     2,R0
        BUSY.NZ
#endif
 
#ifdef  NO_INLINE
        ; !func_3(ev)
        MOV     __HERE__+3(PC),R1
        STO     R1,1(SP)
        BRA     func_3
 
        TST     -1,R0
        LDI     3,R1
        STO.Z   R1,(R3)
#else
        CMP             2,R0
        LDI     3,R1
        STO.Z   R1,(R3)
#endif
 
        TST     -1,R0
        LDI     3,R1
#ifndef SKIP_SHORT_CIRCUITS
        BUSY.Z
#endif
        STO.Z   R1,(R3)
 
#ifndef SKIP_SHORT_CIRCUITS
        CMP     2,R2
        BUSY.NZ
#endif
        CMP     0,R2
        BNZ     proc_6_case_not_zero
#ifndef SKIP_SHORT_CIRCUITS
        BUSY
#endif
        LDI     0,R1
        STO     R1,(R3)
        BRA     proc_6_end_of_case
proc_6_case_not_zero:
        CMP     1,R2
        BNZ     proc_6_case_not_one
#ifndef SKIP_SHORT_CIRCUITS
        BUSY
#endif
        LDI     3,R0
        LOD     gbl_int(R12),R1
        CMP     100,R1
        CLR.GT  R0
        STO     R0,(R3)
        BRA     proc_6_end_of_case
proc_6_case_not_one:
        CMP     2,R2
        BNZ     proc_6_case_not_two
        LDI     1,R1                            // Executed, if done properly
        STO     R1,(R3)
        BRA     proc_6_end_of_case
proc_6_case_not_two:
#ifndef SKIP_SHORT_CIRCUITS
        BUSY
#endif
        CMP     4,R2
        BNZ     proc_6_case_not_four
        LDI     2,R1
        STO     R1,(R3)
        // BRA  proc_6_end_of_case
proc_6_case_not_four:
proc_6_end_of_case:
        LOD     2(SP),R3
        ADD     2,SP
        RETN
 
// void proc_7(int a, int b, int *c) {
//      int     lcl;
//
//      lcl = a + 2;
//      *c = b + a;
//}
 
#ifdef  NO_INLINE
proc_7:
        ADD 2+R0,R1
        STO R1,(R2)
 
        RETN
#endif
 
//      int     a[50];
//      int     b[50][50];
//
// void proc_8(Arr_1_Dim a, Arr_2_Dim b, int c, int d) {
//      int     idx, loc;
//
//      loc = c+5;
//      a[loc] = d;
//      a[loc+1] = a[loc];
//      a[loc+30] = loc;
//      for(idx=loc; idx<= loc+1; idx++)
//              b[loc][idx] = loc;
//      b[loc][loc-1] += 1;
//      b[loc+20][loc] = a[loc];
//      gbl_int = 5;
//}
proc_8:
        ; R0 = a
        ; R1 = b
        ; R2 = c
        ; R3 = d
        ; R4 - unassigned
        ; Makes no function/procedure calls, so these can keep
        ; R2 = loc = c+5, replaces c
        ; R4 = idx
        SUB     2,SP
        STO     R5,1(SP)
        STO     R6,2(SP)
 
        ADD     5,R2    ; loc = c+5
        MOV     R0,R5
        ADD     R2,R5
        STO     R3,(R5)
        STO     R3,1(R5)
        STO     R2,30(R5)
        MOV     R2,R5
        MPYU    50,R5   ; R5 = 50 * R2 = 50 * loc
        ADD     R1,R5   ; R5 = &b[loc][0]
        MOV     R5,R6   ; R6 = &b[loc][0]
        ADD     R2,R5   ; R5 = &b[loc][loc]
        MOV     R2,R4   ; R4 = loc = index
proc_8_top_of_loop:
        CMP     1(R2),R4
        BGT     proc_8_end_of_loop
proc_8_loop_after_condition:
        STO     R2,(R5)
        ADD     1,R5
        ADD     1,R4
        CMP     2(R2),R4
        BLT     proc_8_loop_after_condition
proc_8_end_of_loop:
 
        ; b[loc][loc-1] += 1
        ADD     R2,R6           ; R6 = &b[loc][loc]
        LOD     -1(R6),R5
        ADD     1,R5
        STO     R5,-1(R6)
        ; b[loc+20][loc] = a[loc]
        MOV     R0,R4
        ADD     R2,R4
        LOD     (R4),R3
        STO     R3,20*50(R6)
        LDI     5,R3
        STO     R3,gbl_int(R12)
 
        LOD     1(SP),R5
        LOD     2(SP),R6
        ADD     2,SP
        RETN
 
// void proc_5(void) {
//      gbl_ch = 'A';
//      gbl_bool = false;
//}
#ifdef  NO_INLINE
proc_5:
        LDI     'A',R0
        STO     R0,gbl_ch(R12)
        CLR     R0
        STO     R0,gbl_bool(R12)
        ;
        RETN
#endif
 
// void proc_4(void) {
//      bool    lcl_bool;
//      lcl_bool = (gbl_ch == 'A');
//      gbl_ch_2 = 'B';
// }
#ifdef  NO_INLINE
proc_4:
        //
        ; LDI   GBL,R12 // Already in R12
        ; Setting lcl_bool is irrelevant, so the optimizer should remove it.
        ; R0 doesn't need to be saved, since it's already trashed by the
        ; subroutine call.
        ;
        ; LOD   gbl_ch(R12),R0
        ; CLR   R1
        ; CMP   'A',R0
        ; ADD.Z 1,R1
        ;
        LDI     'B',R0
        STO     R0,gbl_ch_2(R12)
        ;
        RETN
#endif
 
// void proc_3(RECP *a) {
//      if (gbl_ptr != NULL)
//              *a = gbl_ptr->ptr_comp;
//      proc_7(10,gbl_int, &gbl_ptr->variant.var_1.int_comp); // ??
//}
proc_3:
        SUB     3,SP
        STO     R3,2(SP)
        STO     R2,3(SP)
        ; Save one for the return address from our JSR "instruction"
        ;
        LOD     gbl_ptr(R12),R2
        TST     -1,R2
#ifndef SKIP_SHORT_CIRCUITS
        BUSY.Z
#endif
        LOD.NZ  ptr_comp(R2),R3
        STO.NZ  R3,(R0)
#ifdef  NO_INLINE
        LDI     10,R0
        LOD     gbl_int(R12),R1
        MOV     variant.var_1.int_comp(R2),R2
        MOV     __HERE__+3(PC),R3
        STO     R3,1(SP)
        BRA     proc_7
#else
        LOD     gbl_int(R12),R1
        ADD      12,R1
        STO      R1,variant.var_1.int_comp(R2)
#endif
        ;
        LOD     2(SP),R3
        LOD     3(SP),R2
        ADD     3,SP
        RETN
 
 
// void proc_2(int *a) {
//      int             lcl_int;
//      test_enum       lcl_enum;
//
//      lcl_int = *a + 10;
//      do {
//              if (gbl_ch == 'A') {
//                      lcl_int -= 1;
//                      *a = lcl_int - gbl_int;
//                      lcl_enum = Ident_1;
//              }
//      } while(lcl_enum != Ident_1);
//}
proc_2:
        SUB     5,SP
        STO     R6,1(SP)
        STO     R5,2(SP)
        STO     R4,3(SP)
        STO     R3,4(SP)
        STO     R2,5(SP)
        // R1 doesn't need to be stored, it was used in the subroutine
        // call calculation
 
        LOD     (R0),R1
        MOV     10(R1),R2       ; R2 = lcl_int
        LOD     gbl_ch(R12),R4  ; R4 = gbl_ch
#ifdef  NO_CHEATING
proc_2_loop:
        CMP     'A',R4
        SUB.Z   1,R2
        LOD.Z   gbl_int(R12),R5 ; R5 = gbl_int
        MOV.Z   R2,R6           ; R6 = lcl_int
        SUB.Z   R5,R6           ; lcl_int - gbl_int
        STO.Z   R6,(R0)         ; *a = R6
        CLR.Z   R3              ; lcl_enum = 0
// #ifndef      SKIP_SHORT_CIRCUITS
        // BUSY.NZ
// #endif
 
        TST     -1,R3
// #ifndef      SKIP_SHORT_CIRCUITS
        // BUSY.NZ
// #endif
        BNZ     proc_2_loop
#else
        LOD     gbl_int(R12),R5
        SUB     1(R5),R2
        STO     R2,(R0)
#endif
        ;
        LOD     1(SP),R6
        LOD     2(SP),R5
        LOD     3(SP),R4
        LOD     4(SP),R3
        LOD     5(SP),R2
        ADD     5,SP
        RETN
 
//void  proc_1 (RECP a) {
//      RECP    nxt = a->ptr_comp;
//
//      // structassign(a->ptr_comp, gbl_ptr);
//      *(a->ptr_comp) = *(gbl_ptr);
//
//      a->variant.var_1.int_comp = 5;
//      nxt->variant.var_1.int_comp = a->variant.var_1.int_comp;
//      proc_3(&nxt->ptr_comp);
//
//      if (nxt->discr == 0) {
//              nxt->variant.var_1.int_comp = 6;
//              proc_6(a->variant.var_1.enum_comp, &nxt->variant.var_1.enum_comp);
//              nxt->ptr_comp = gbl_ptr->ptr_comp;
//              proc_7(nxt->variant.var_1.int_comp, 10, &nxt->variant.var_1.int_comp);
//      } else
//              // structassign(a, a->ptr_comp);
//              *a = *(a->ptr_comp);
//}
proc_1:
        SUB     9,SP
        STO     R2,2(SP)
        STO     R3,3(SP)
        STO     R4,4(SP)
        STO     R5,5(SP)
        STO     R6,6(SP)
        STO     R7,7(SP)
        STO     R8,8(SP)
        STO     R9,9(SP)
 
        ; R9 = a
        ; R4 = nxt
        ; R12 = GBL
        ; R13 = SP
        MOV     R0,R9
        LOD     ptr_comp(R9),R4
#ifndef SKIP_SHORT_CIRCUITS
        TST     -1,R4
        BUSY.Z
#endif
        LDI     35,R5
        MOV     R9,R6
        LOD     gbl_ptr(R12),R7
proc_1_assign_loop_1:
        LOD     (R6),R8
        ADD     1,R6
        STO     R8,(R7)
        ADD     1,R7
        SUB     1,R5
        BNZ     proc_1_assign_loop_1;
 
#ifndef SKIP_SHORT_CIRCUITS
        LOD     gbl_ptr(R12),R2
        TST     -1,R2
        BUSY.Z
#endif
 
        LDI     5,R5
        STO     R5,variant.var_1.int_comp(R9)
        STO     R5,variant.var_1.int_comp(R4)
        MOV     ptr_comp(R4),R0
        MOV     __HERE__+3(PC),R1
        STO     R1,1(SP)
        BRA     proc_3          ; Uses R0 and R1
 
        LOD     discr(R4),R5
        CMP     0,R5
        BNZ     proc_1_last_struct_assign
        ; This is the juncture that is "supposed" to be taken
        LDI     6,R5
 
        STO     R5,variant.var_1.int_comp(R4)
        LOD     variant.var_1.enum_comp(R9), R0
#ifndef SKIP_SHORT_CIRCUITS
        CMP     2,R0
        BUSY.NZ
#endif
        MOV     variant.var_1.enum_comp+R4, R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     proc_6
        ;
        LOD     gbl_ptr(R12),R5
        LOD     ptr_comp(R5),R5
        STO     R5,ptr_comp(R4)
        ;
#ifdef  NO_INLINE
        LOD     variant.var_1.int_comp(R4),R0
        LDI     10,R1
        MOV     variant.var_1.int_comp(R4),R2
        MOV     proc_1_return_closeout(PC),R3
        STO     R3,1(SP)
        BRA     proc_7
#else
        LOD     variant.var_1.int_comp(R4),R0
        ADD     12,R0
        STO     R0,variant.var_1.int_comp(R4)
        BRA     proc_1_return_closeout
#endif
        ;
proc_1_last_struct_assign:
#ifndef SKIP_SHORT_CIRCUITS
        BUSY
#endif
        LDI     35,R4
        MOV     R2,R5
        LOD     gbl_ptr(R12),R6
proc_1_assign_loop_2:
        LOD     (R6),R8
        STO     R8,(R7)
        ADD     1,R6
        ADD     1,R7
        SUB     1,R5
        BNZ     proc_1_assign_loop_2
        //
proc_1_return_closeout:
        //
        LOD     2(SP),R2
        LOD     3(SP),R3
        LOD     4(SP),R4
        LOD     5(SP),R5
        LOD     6(SP),R6
        LOD     7(SP),R7
        LOD     8(SP),R8
        LOD     9(SP),R9
        ADD     9,SP
        RETN
 
// void dhrystone(void) {
//      int     lcl_int_1, lcl_int_2, lcl_int_3, index, number_of_runs = 500;
//      test_enum       lcl_enum;
//      char    lcl_str_1[30], lcl_str_2[30], ch_index;
//      REC_T   a, b, *nxt = &a;
//
//      gbl_ptr = &b;
//      gbl_ptr->ptr_comp = nxt;
//      gbl_ptr->variant.var_1.enum_comp = 2;
//      gbl_ptr->variant.var_1.int_comp = 40;
//      lcl_strcpy(gbl_ptr->variant.var_1.str_comp, "DHRYSTONE PROGRAM, SOME STRING");
//      lcl_strcpy(lcl_str_1, "DHRYSTONE PROGRAM, 1\'ST STRING");
//
//      gbl_arr_2[8][7] = 10;
//
//      for(index=0; index < number_of_runs; index++) {
//              proc_5();
//              proc_4();
//              lcl_int_1 = 2;
//              lcl_int_2 = 3;
//              lcl_strcpy(lcl_str_2, "DHRYSTONE PROGRAM, 2\'ND STRING");
//              lcl_enum = Ident_2;
//              gbl_bool = !func_2(lcl_str_1, lcl_str_2);
//              while(lcl_int_1 < lcl_int_2) {
//                      lcl_int_3 = 5 * lcl_int_1 - lcl_int_2;
//                      proc_7(lcl_int_1, lcl_int_2, &lcl_int_3);
//                      lcl_int_1 += 1;
//              }
//
//              proc_8(gbl_arr_1, gbl_arr_2, lcl_int_1, lcl_int_3);
//              proc_1(gbl_ptr);
//
//              for(ch_index='A'; ch_index <= gbl_ch_2; ch_index++) {
//                      if (lcl_enum == func_1(ch_index, 'C')) {
//                              // Then not executed??
//                              proc_6(0, &lcl_enum);
//                              lcl_strcpy(lcl_str_2, "DHRYSTONE PROGRAM, 3\'RD STRING");
//                              lcl_int_2 = index;
//                              gbl_int = index;
//                      }
//              }
//
//              lcl_int_2 = lcl_int_2 * lcl_int_1;
//              lcl_int_1 = lcl_int_2 / lcl_int_3;
//              lcl_int_2 = 7 * ( lcl_int_2 - lcl_int_3) - lcl_int_1;
//              proc_2(&lcl_int_1);
//      }
//}
 
some_string:
        word    'D','H','R','Y','S','T','O','N','E',' '
        word    'P','R','O','G','R','A','M',',',' '
        word    'S','O','M','E',' ','S','T','R','I','N','G'
        word    0
 
first_string:
        word    'D','H','R','Y','S','T','O','N','E',' '
        word    'P','R','O','G','R','A','M',','
        word    ' ','1','\'','S','T'
        word    ' ','S','T','R','I','N','G'
        word    0
 
second_string:
        word    'D','H','R','Y','S','T','O','N','E',' '
        word    'P','R','O','G','R','A','M',',',' '
        word    '2','\'','N','D',' ','S','T','R','I','N','G'
        word    0
 
third_string:
        word    'D','H','R','Y','S','T','O','N','E',' '
        word    'P','R','O','G','R','A','M',',',' '
        word    '3','\'','R','D',' ','S','T','R','I','N','G'
        word    0
 
dhrystone:
#ifdef  SUPERVISOR_TASK
        SUB     12+RECSIZE+RECSIZE+30+30+3,SP
        ; Leave a space on the top of the stack for calling
        ; subroutines.
        STO     R1,2(SP)
        STO     R2,3(SP)
        STO     R3,4(SP)
        STO     R4,5(SP)
        STO     R5,6(SP)
        STO     R6,7(SP)
        STO     R7,8(SP)
        STO     R8,9(SP)
        STO     R9,10(SP)
        STO     R10,11(SP)
        STO     R11,12(SP)
        lcl_int_1       equ     12                      ; plus SP
#else
        lcl_int_1       equ     2                       ; plus SP
        SUB     2+RECSIZE+RECSIZE+30+30+3,SP
#endif
        // 12 is the global variable pointer
        // 13 is our stack
        // 14 is our condition code register
        // 15 is the program counter
        ;
        lcl_int_3       equ     lcl_int_1+1             ; plus SP
        lcl_enum        equ     lcl_int_3+1             ; plus SP
        lcl_str_1       equ     lcl_enum+1              ; plus SP
        lcl_str_2       equ     lcl_str_1+30            ; plus SP
        rec_a           equ     lcl_str_2+30            ; plus SP
        rec_b           equ     rec_a+RECSIZE           ; plus SP
 
//      int     lcl_int_1, lcl_int_2, lcl_int_3, index, number_of_runs = 500;
//      test_enum       lcl_enum;
//      char    lcl_str_1[30], lcl_str_2[30], ch_index;
//      REC_T   a, b, *nxt = &a;
//
//      gbl_ptr = &b;
        MOV     rec_b(SP),R0            ; R0 = &b
        STO     R0,gbl_ptr(PC)
//      gbl_ptr->ptr_comp = nxt;
        MOV     rec_a(SP),R1            ; R1 = &a = nxt
        STO     R1,ptr_comp(R0)         ; gbp_ptr->ptr.comp=b->ptr.comp=R1=nxt
//      gbl_ptr->variant.var_1.enum_comp = 2;
        LDI     2,R2
        STO     R2,variant.var_1.enum_comp(R0)
//      gbl_ptr->variant.var_1.int_comp = 40;
        LDI     40,R2
        STO     R2,variant.var_1.int_comp(R0)
//      lcl_strcpy(gbl_ptr->variant.var_1.str_comp, "DHRYSTONE PROGRAM, SOME STRING");
        MOV     variant.var_1.str_comp(R0),R0
        MOV     some_string(PC),R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     lcl_strcpy
 
//      lcl_strcpy(lcl_str_1, "DHRYSTONE PROGRAM, 1\'ST STRING");
        MOV     lcl_str_1(SP),R0
        MOV     first_string(PC),R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     lcl_strcpy
 
//      gbl_arr_2[8][7] = 10;
        LDI     10,R0
        STO     R0,8*50+7+gbl_arr_2(R12)
//
//      for(index=0; index < number_of_runs; index++) {
        ; Let R11 be our index
        CLR     R11
dhrystone_main_loop:
        ;; Start of Dhrystone main loop
        ; proc_5();
#ifdef  NO_INLINE
        MOV     __HERE__+3(PC),R0
        STO     R0,1(SP)
        BRA     proc_5
#else
        LDI     'A',R0
        STO     R0,gbl_ch(R12)
        CLR     R0
        STO     R0,gbl_bool(R12)
#endif
        ; proc_4();
#ifdef  NO_INLINE
        MOV     __HERE__+3(PC),R0
        STO     R0,1(SP)
        BRA     proc_4
#else
        LDI     'B',R0
        STO     R0,gbl_ch_2(R12)
#endif
//              lcl_int_1 = 2;
        LDI     2,R5
        STO     R5,lcl_int_1(SP)
//              lcl_int_2 = 3;
        LDI     3,R6
//              lcl_strcpy(lcl_str_2, "DHRYSTONE PROGRAM, 2\'ND STRING");
        MOV     lcl_str_2(SP),R0
        MOV     second_string(PC),R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     lcl_strcpy
//              lcl_enum = Ident_2;
        LDI     2,R0
        STO     R0,lcl_enum(SP)
//              gbl_bool = !func_2(lcl_str_1, lcl_str_2);
        MOV     lcl_str_1(SP),R0
        MOV     lcl_str_2(SP),R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     func_2
        CLR     R1
        TST     -1,R0
        LDILO.Z 1,R1
        STO     R1,gbl_bool(PC)
 
//              while(lcl_int_1 < lcl_int_2) {
        ; R5 = lcl_int_1 = 2 on entry
        ; R6 = lcl_int_2 = 3 on entry, so no entry test is required
        LOD     lcl_int_1(SP),R5
        // The 'while' comparison
        CMP     R6,R5
        BGE     dhrystone_end_while_loop
dhrystone_while_loop:
//                      lcl_int_3 = 5 * lcl_int_1 - lcl_int_2;
        MOV     R5,R7
        MPYS    5,R7
        SUB     R6,R7
        STO     R7,lcl_int_3(SP)
//                      proc_7(lcl_int_1, lcl_int_2, &lcl_int_3);
#ifdef  NO_INLINE
        MOV     R5,R0
        MOV     R6,R1
        MOV     lcl_int_3(SP),R2
        MOV     __HERE__+3(PC),R3
        STO     R3,1(SP)
        BRA     proc_7
#else
        MOV     R6,R1
        ADD     2+R5,R1
        STO     R1,lcl_int_3(SP)
#endif
//                      lcl_int_1 += 1;
        LOD     lcl_int_1(SP),R5
        ADD     1,R5
        STO     R5,lcl_int_1(SP)
;
        ; BRA   dhrystone_while_loop    ; We'll unroll the loop, and put an
        CMP     R6,R5                   ; additional comparison at the bottom
        BLT     dhrystone_while_loop
dhrystone_end_while_loop:
//              }
//
//              proc_8(gbl_arr_1, gbl_arr_2, lcl_int_1, lcl_int_3);
        MOV     gbl_arr_1(PC),R0
        MOV     gbl_arr_2(PC),R1
        MOV     R5,R2
        MOV     R6,R3
        MOV     __HERE__+3(PC),R4
        STO     R4,1(SP)
        BRA     proc_8
//              proc_1(gbl_ptr);
        LOD     gbl_ptr(PC),R0
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     proc_1
//
//              for(ch_index='A'; ch_index <= gbl_ch_2; ch_index++) {
        LDI     'A',R7
        LOD     gbl_ch_2(SP),R8
        CMP     R7,R8
        BLT     dhrystone_end_of_for_loop
dhrystone_top_of_for_loop:
//                      if (lcl_enum == func_1(ch_index, 'C')) {
#ifdef  NO_INLINE
        MOV     R7,R0
        LDI     'C',R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     func_1
#else
        CMP     'C',R7
        CLR.NZ  R0
        STO.Z   R7,gbl_ch(R12)
        LDILO.Z 1,R0
#endif
 
        ; Result is now in R0
        LOD     lcl_enum(SP),R1
        CMP     R0,R1
        BNZ     dhrystone_skip_then_clause
//                              // Then not executed??
//                              proc_6(0, &lcl_enum);
 
#ifndef SKIP_SHORT_CIRCUITS
        BUSY
#endif
 
        CLR     R0
        MOV     lcl_enum(SP),R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     proc_6
 
//                              lcl_strcpy(lcl_str_2, "DHRYSTONE PROGRAM, 3\'RD STRING");
        MOV     lcl_str_2(SP),R0
        MOV     third_string(PC),R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     lcl_strcpy
//                              lcl_int_2 = index;
        MOV     R11,R6
//                              gbl_int = index;
        STO     R11,gbl_int(PC)
//                      }
dhrystone_skip_then_clause:
        ADD     1,R7
        LOD     gbl_ch_2(SP),R8
        CMP     R8,R7
        BGE     dhrystone_top_of_for_loop
dhrystone_end_of_for_loop:
//              }
//
//              lcl_int_2 = lcl_int_2 * lcl_int_1;
        LOD     lcl_int_1(SP),R5
        MPYS    R5,R6   ; lcl_int_2 =
//              lcl_int_1 = lcl_int_2 / lcl_int_3;
#ifndef SKIP_DIVIDE
        MOV     R6,R0
        LOD     lcl_int_3(SP),R1
        MOV     __HERE__+3(PC),R2
        STO     R2,1(SP)
        BRA     divs
#else
        LDI     9,R0
#endif
        STO     R0,lcl_int_1(SP)
//              lcl_int_2 = 7 * ( lcl_int_2 - lcl_int_3) - lcl_int_1;
        LOD     lcl_int_3(SP),R2
        SUB     R2,R6
        MPYS    7,R6
        SUB     R0,R6
//              proc_2(&lcl_int_1);
        MOV     lcl_int_1(SP),R0
        MOV     __HERE__+3(PC),R1
        STO     R1,1(SP)
        BRA     proc_2
 
        ;; Bottom of (and return from) Dhrystone main loop
        ADD     1,R11
        CMP     NUMBER_OF_RUNS,R11
        BLT     dhrystone_main_loop
//      }
 
#ifdef  SUPERVISOR_TASK
        LOD     2(SP),R1
        LOD     3(SP),R2
        LOD     4(SP),R3
        LOD     5(SP),R4
        LOD     6(SP),R5
        LOD     7(SP),R6
        LOD     8(SP),R7
        LOD     9(SP),R8
        LOD     10(SP),R9
        LOD     11(SP),R10
        LOD     12(SP),R11
        ;
        ADD     12+RECSIZE+RECSIZE+30+30+3,SP
        ; Return from subroutine
        RETN
#else
        LDI     0,CC
        NOP
        NOP
        BUSY
#endif
Browse

Tools

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [bench/] [asm/] [zipdhry.S] - Blame information for rev 43

Line No.	Rev	Author	Line
1	41	dgisselq	`// Under Verilator:`
2			`// DMIPS: 25.57 100 MHz 0.26`
3			`// For comparison:`
4			`// uBlaze: 255 177 MHz 1.44`
5			`// LEON3 1.4`
6			`// NiOS II: 218 185 MHz 1.16`
7			`// OpenRisk 250 250 MHz 1.00`
8			`// LM32 1.14`
9			`// ZPU 2.6 50 MHz 0.05`
10			`//`
11
12			`// #define NO_LOOP_UNROLLING`
13			`#define SKIP_SHORT_CIRCUITS`
14			`sys.ctr.mtask equ 0xc0000008`
15			`// int main(int argc, char **argv) {`
16			`// dhrystone();`
17			`// }`
18			`entry:`
19			`MOV top_of_stack(PC),uSP`
20			`MOV entry(PC),uR12`
21			`; Store our tick counter in R1`
22			`LDI sys.ctr.mtask,R1`
23			`; And start with our counter cleared at zero`
24			`CLR R0`
25			`STO R0,(R1)`
26			`#ifdef SUPERVISOR_TASK`
27			`MOV __HERE__+3(PC),R0`
28			`STO R0,1(SP)`
29			`BRA dhrystone`
30			`#else`
31			`MOV dhrystone(PC),uPC`
32			`RTU`
33			`#endif`
34			`; Read the tick counter back out`
35			`LOD (R1),R0`
36			`HALT ; Stop the CPU--We're done!!!!!!!`
37
38			`// typedef enum { Ident_1, Ident_2, Ident_3, Ident_4, Ident_5 } test_enum;`
39			`// typedef enum { false, true } bool;`
40