Subversion Repositories zipcpu

################################################################################

#

# Filename:     Makefile

#

# Project:      Zip CPU -- a small, lightweight, RISC CPU soft core

#

# Purpose:      This makefile builds the final verilator simulation of the

#               zipsystem.  Specifically, it builds the final C++ portion

#       of the simulator, and thus the final simulator executable.

#

#       This simulator depends upon the ncurses library.

#

#       Useful targets of this makefile include:

#

#       zippy_tb (default)

#               This is the test bench program / simulator that is built by

#               this directory.

#

#       test

#               Runs the simulator on a test program found in the trunk/sw/zasm

#               directory.  That program needs to be built via 'make test' in

#               that directory before this make test will work.  Changes to the

#               test itself will require a 'make test' in trunk/sw/zasm as well

#               as 'make test' in this directory.

#

#               The test itself consists of two tests.  The first, the "step"

#               test, tests whether the test works via "step"ing the CPU.

#               This would be the interface to the CPU were the CPU placed in

#               a device.

#

#               The second test is an internal test which works by just running

#               the CPU without step instructions.

#

#               In either case the test is over upon reaching either a HALT

#               or a BUSY instruction.  A HALT instruction indicates success,

#               BUSY a failure.

#

#       stest

#               Runs the test in "step" mode as described above.

#

#       itest

#               Runs the test file in interactive mode.  The CPU will not

#               execute any instructions without user interaction.  This is

#               useful for actually debugging the test.  The other two modes

#               are useful for quickly determining that the CPU does (or

#               doesn't) work.

#

#       dhrystone

#               Runs a hand-optimized version of the dhrystone benchmark.

#               Using the instructions at the top of the dhrystone assembly

#               file, you should be able to convert the result to DMIPS or even

#               DMIPS/MHz.

#

#       div_tb

#               A raw test bench to test the divide unit separate from the

#               rest of the CPU.  This test will fail with a failed assert()

#               if unsuccessful, or complete with no error (but lots of

#               debugging output) if successful.  To actually run this test,

#               you'll need to run ./div_tb (no arguments necessary).

#

#       pdump

#               zippy_tb can be configured to produce a profile output that is

#               very useful when debugging the Dhrystone benchmark.  (It is

#               so configured by default.)  This file will be name pfile.bin.

#               pdump is a very simple program designed to read this file and

#               produce some (very raw) information from it.  To use this,

#               type pdump and the name of the executable file, such as

#               ../asm/zipdhry.z, and examine how many times each instruction

#               was executed, and how many stalls took place between each

#               instruction and the next.

#

#       clean

#               Removes all products of compilation--specifically zippy_tb,

#               pdump and div_tb.

#

#

# Creator:      Dan Gisselquist, Ph.D.

#               Gisselquist Technology, LLC

#

################################################################################

#

# Copyright (C) 2015, Gisselquist Technology, LLC

#

# This program is free software (firmware): you can redistribute it and/or

# modify it under the terms of  the GNU General Public License as published

# by the Free Software Foundation, either version 3 of the License, or (at

# your option) any later version.

#

# This program is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# for more details.

#

# License:      GPL, v3, as defined and found on www.gnu.org,

#               http://www.gnu.org/licenses/gpl.html

#

#

################################################################################

#

all: zippy_tb pdump div_tb

CXX     := g++

FLAGS   := -Wall -Og -g

ZASM    := ../../sw/zasm

RTLD    := ../../rtl

INCS    := -I$(RTLD)/obj_dir/ -I$(RTLD) -I/usr/share/verilator/include -I$(ZASM)

SOURCES := zippy_tb.cpp memsim.cpp twoc.cpp $(ZASM)/zopcodes.cpp $(ZASM)/zparser.cpp

VLIB    := /usr/share/verilator/include/verilated.cpp

RAWLIB  := $(VLIB) $(RTLD)/obj_dir/Vzipsystem__ALL.a

LIBS    := $(RAWLIB) -lncurses

TESTF   := $(ZASM)/z.out

DHRYSTONEF := ../asm/zipdhry.z

zippy_tb: $(SOURCES) $(RAWLIB) $(ZASM)/zopcodes.h $(ZASM)/zparser.h testb.h

zippy_tb: $(RTLD)/cpudefs.h

        $(CXX) $(FLAGS) $(INCS) $(SOURCES) $(LIBS) -o $@

div_tb: div_tb.cpp twoc.cpp $(VLIB) $(RTLD)/obj_dir/Vdiv__ALL.a testb.h

        $(CXX) $(FLAGS) $(INCS) div_tb.cpp twoc.cpp $(VLIB) $(RTLD)/obj_dir/Vdiv__ALL.a -o $@

pdump: pdump.cpp $(ZASM)/zopcodes.cpp $(ZASM)/zparser.cpp

pdump: $(ZASM)/zopcodes.h $(ZASM)/zparser.h testb.h twoc.cpp

        $(CXX) $(FLAGS) $(INCS) pdump.cpp $(ZASM)/zopcodes.cpp $(ZASM)/zparser.cpp twoc.cpp -o $@

.PHONY: stest

stest: zippy_tb

        ./zippy_tb -s $(TESTF)

.PHONY: itest

itest: zippy_tb

        ./zippy_tb $(TESTF)

.PHONY: test

test: zippy_tb stest

        ./zippy_tb -a $(TESTF)

.PHONY: dhrystone

dhrystone: zippy_tb

        ./zippy_tb -a $(DHRYSTONEF)

.PHONY: clean

clean:

        rm ./zippy_tb pdump div_tb