Subversion Repositories zipcpu

////////////////////////////////////////////////////////////////////////////////

//

// Filename:    memsim.cpp

//

// Project:     Zip CPU -- a small, lightweight, RISC CPU core

//

// Purpose:     This creates a memory like device to act on a WISHBONE bus.

//              It doesn't exercise the bus thoroughly, but does give some

//              exercise to the bus to see whether or not the bus master

//              can control it.

//

//

// Creator:     Dan Gisselquist, Ph.D.

//              Gisselquist Technology, LLC

//

////////////////////////////////////////////////////////////////////////////////

//

// Copyright (C) 2015, Gisselquist Technology, LLC

//

// This program is free software (firmware): you can redistribute it and/or

// modify it under the terms of  the GNU General Public License as published

// by the Free Software Foundation, either version 3 of the License, or (at

// your option) any later version.

//

// This program is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with this program.  (It's in the $(ROOT)/doc directory, run make with no

// target there if the PDF file isn't present.)  If not, see

// <http://www.gnu.org/licenses/> for a copy.

//

// License:     GPL, v3, as defined and found on www.gnu.org,

//              http://www.gnu.org/licenses/gpl.html

//

//

////////////////////////////////////////////////////////////////////////////////

#include <stdio.h>

#include <assert.h>

#include "memsim.h"

MEMSIM::MEMSIM(const unsigned int nwords) {

        unsigned int    nxt;

        for(nxt=1; nxt < nwords; nxt<<=1)

                ;

        m_len = nxt; m_mask = nxt-1;

        m_mem = new BUSW[m_len];

}

MEMSIM::~MEMSIM(void) {

        delete[]        m_mem;

}

void    MEMSIM::load(const char *fname) {

        FILE    *fp;

        unsigned int    nr;

        fp = fopen(fname, "r");

        if (!fp) {

                fprintf(stderr, "Could not open/load file \'%s\'\n",

                        fname);

                perror("O/S Err:");

                fprintf(stderr, "\tInitializing memory with zero instead.\n");

                nr = 0;

        } else {

                nr = fread(m_mem, sizeof(BUSW), m_len, fp);

                fclose(fp);

                if (nr != m_len) {

                        fprintf(stderr, "Only read %d of %d words\n",

                                nr, m_len);

                        fprintf(stderr, "\tFilling the rest with zero.\n");

                }

        }

        for(; nr<m_len; nr++)

                m_mem[nr] = 0l;

}

void    MEMSIM::apply(const unsigned int clk, const unsigned char wb_cyc,

                        const unsigned char wb_stb, const unsigned char wb_we,

                        const BUSW wb_addr, const BUSW wb_data,

                        unsigned char &o_ack, unsigned char &o_stall, BUSW &o_data) {

        if ((wb_cyc)&&(wb_stb)&&(clk)) {

                if (wb_we)

                        m_mem[wb_addr & m_mask] = wb_data;

                o_ack  = 1;

                o_stall= 0;

                o_data = m_mem[wb_addr & m_mask];

                /*

                printf("MEMBUS -- ACK %s 0x%08x - 0x%08x\n",

                        (wb_we)?"WRITE":"READ",

                        wb_addr, o_data);

                */

        } else if (clk) {

                o_ack   = 0;

                o_stall = 0;

        }

}