Subversion Repositories zipcpu

///////////////////////////////////////////////////////////////////////////

//

// Filename:    cpuops.v

//

// Project:     Zip CPU -- a small, lightweight, RISC CPU soft core

//

// Purpose:     This supports the instruction set reordering of operations

//              created by the second generation instruction set, as well as

//      the new operations of POPC (population count) and BREV (bit reversal).

//

//

// Creator:     Dan Gisselquist, Ph.D.

//              Gisselquist Technology, LLC

//

///////////////////////////////////////////////////////////////////////////

//

// Copyright (C) 2015, Gisselquist Technology, LLC

//

// This program is free software (firmware): you can redistribute it and/or

// modify it under the terms of  the GNU General Public License as published

// by the Free Software Foundation, either version 3 of the License, or (at

// your option) any later version.

//

// This program is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// License:     GPL, v3, as defined and found on www.gnu.org,

//              http://www.gnu.org/licenses/gpl.html

//

//

///////////////////////////////////////////////////////////////////////////

//

module  cpuops(i_clk,i_rst, i_ce, i_valid, i_op, i_a, i_b, o_c, o_f, o_valid,

                        o_illegal, o_busy);

        parameter       IMPLEMENT_MPY = 1;

        input           i_clk, i_rst, i_ce;

        input           [3:0]    i_op;

        input           [31:0]   i_a, i_b;

        input                   i_valid;

        output  reg     [31:0]   o_c;

        output  wire    [3:0]    o_f;

        output  reg             o_valid;

        output  wire            o_illegal;

        output  wire            o_busy;

        // Rotate-left pre-logic

        wire    [63:0]   w_rol_tmp;

        assign  w_rol_tmp = { i_a, i_a } << i_b[4:0];

        wire    [31:0]   w_rol_result;

        assign  w_rol_result = w_rol_tmp[63:32]; // Won't set flags

        // Shift register pre-logic

        wire    [32:0]           w_lsr_result, w_asr_result;

        assign  w_asr_result = (|i_b[31:5])? {(33){i_a[31]}}

                                : ( {i_a, 1'b0 } >>> (i_b[4:0]) );// ASR

        assign  w_lsr_result = (|i_b[31:5])? 33'h00

                                : ( { i_a, 1'b0 } >> (i_b[4:0]) );// LSR

        // Bit reversal pre-logic

        wire    [31:0]   w_brev_result;

        genvar  k;

        generate

        for(k=0; k<32; k=k+1)

                assign w_brev_result[k] = i_b[31-k];

        endgenerate

        // Popcount pre-logic

        wire    [31:0]   w_popc_result;

        assign  w_popc_result[5:0]=

                 ({5'h0,i_b[ 0]}+{5'h0,i_b[ 1]}+{5'h0,i_b[ 2]}+{5'h0,i_b[ 3]})

                +({5'h0,i_b[ 4]}+{5'h0,i_b[ 5]}+{5'h0,i_b[ 6]}+{5'h0,i_b[ 7]})

                +({5'h0,i_b[ 8]}+{5'h0,i_b[ 9]}+{5'h0,i_b[10]}+{5'h0,i_b[11]})

                +({5'h0,i_b[12]}+{5'h0,i_b[13]}+{5'h0,i_b[14]}+{5'h0,i_b[15]})

                +({5'h0,i_b[16]}+{5'h0,i_b[17]}+{5'h0,i_b[18]}+{5'h0,i_b[19]})

                +({5'h0,i_b[20]}+{5'h0,i_b[21]}+{5'h0,i_b[22]}+{5'h0,i_b[23]})

                +({5'h0,i_b[24]}+{5'h0,i_b[25]}+{5'h0,i_b[26]}+{5'h0,i_b[27]})

                +({5'h0,i_b[28]}+{5'h0,i_b[29]}+{5'h0,i_b[30]}+{5'h0,i_b[31]});

        assign  w_popc_result[31:6] = 26'h00;

        // Prelogic for our flags registers

        wire    z, n, v;

        reg     c, pre_sign, set_ovfl;

        always @(posedge i_clk)

                if (i_ce) // 1 LUT

                        set_ovfl =(((i_op==4'h0)&&(i_a[31] != i_b[31]))//SUB&CMP

                                ||((i_op==4'h2)&&(i_a[31] == i_b[31])) // ADD

                                ||(i_op == 4'h6) // LSL

                                ||(i_op == 4'h5)); // LSR

        // A 4-way multiplexer can be done in one 6-LUT.

        // A 16-way multiplexer can therefore be done in 4x 6-LUT's with

        //      the Xilinx multiplexer fabric that follows. 

        // Given that we wish to apply this multiplexer approach to 33-bits,

        // this will cost a minimum of 132 6-LUTs.

        generate

        if (IMPLEMENT_MPY == 0)

        begin

                always @(posedge i_clk)

                if (i_ce)

                begin

                        pre_sign <= (i_a[31]);

                        c <= 1'b0;

                        casez(i_op)

                        4'b0000:{c,o_c } <= {1'b0,i_a}-{1'b0,i_b};// CMP/SUB

                        4'b0001:   o_c   <= i_a & i_b;          // BTST/And

                        4'b0010:{c,o_c } <= i_a + i_b;          // Add

                        4'b0011:   o_c   <= i_a | i_b;          // Or

                        4'b0100:   o_c   <= i_a ^ i_b;          // Xor

                        4'b0101:{o_c,c } <= w_lsr_result[32:0];  // LSR

                        4'b0110:{c,o_c } <= (|i_b[31:5])? 33'h00 : {1'b0, i_a } << i_b[4:0];     // LSL

                        4'b0111:{o_c,c } <= w_asr_result[32:0];  // ASR

                        4'b1000:   o_c   <= { i_b[15: 0], i_a[15:0] }; // LODIHI

                        4'b1001:   o_c   <= { i_a[31:16], i_b[15:0] }; // LODILO

                        // 4'h1010: The unimplemented MPYU,

                        // 4'h1011: and here for the unimplemented MPYS

                        4'b1100:   o_c   <= w_brev_result;      // BREV

                        4'b1101:   o_c   <= w_popc_result;      // POPC

                        4'b1110:   o_c   <= w_rol_result;       // ROL

                        default:   o_c   <= i_b;                // MOV, LDI

                        endcase

                end

                assign o_busy = 1'b0;

                reg     r_illegal;

                always @(posedge i_clk)

                        r_illegal <= (i_ce)&&((i_op == 4'h3)||(i_op == 4'h4));

                assign o_illegal = r_illegal;

        end else begin

                //

                // Multiply pre-logic

                //

                wire            [16:0]   w_mpy_a_input, w_mpy_b_input;

                wire            [33:0]   w_mpy_result;

                reg             [31:0]   r_mpy_result;

                assign  w_mpy_a_input ={ ((i_a[15])&(i_op[0])), i_a[15:0] };

                assign  w_mpy_b_input ={ ((i_b[15])&(i_op[0])), i_b[15:0] };

                assign  w_mpy_result   = w_mpy_a_input * w_mpy_b_input;

                always @(posedge i_clk)

                        if (i_ce)

                                r_mpy_result  = w_mpy_result[31:0];

                //

                // The master ALU case statement

                //

                always @(posedge i_clk)

                if (i_ce)

                begin

                        pre_sign <= (i_a[31]);

                        c <= 1'b0;

                        casez(i_op)

                        4'b0000:{c,o_c } <= {1'b0,i_a}-{1'b0,i_b};// CMP/SUB

                        4'b0001:   o_c   <= i_a & i_b;          // BTST/And

                        4'b0010:{c,o_c } <= i_a + i_b;          // Add

                        4'b0011:   o_c   <= i_a | i_b;          // Or

                        4'b0100:   o_c   <= i_a ^ i_b;          // Xor

                        4'b0101:{o_c,c } <= w_lsr_result[32:0];  // LSR

                        4'b0110:{c,o_c } <= (|i_b[31:5])? 33'h00 : {1'b0, i_a } << i_b[4:0];     // LSL

                        4'b0111:{o_c,c } <= w_asr_result[32:0];  // ASR

                        4'b1000:   o_c   <= { i_b[15: 0], i_a[15:0] }; // LODIHI

                        4'b1001:   o_c   <= { i_a[31:16], i_b[15:0] }; // LODILO

                        4'b1010:   o_c   <= r_mpy_result; // MPYU

                        4'b1011:   o_c   <= r_mpy_result; // MPYS

                        4'b1100:   o_c   <= w_brev_result;      // BREV

                        4'b1101:   o_c   <= w_popc_result;      // POPC

                        4'b1110:   o_c   <= w_rol_result;       // ROL

                        default:   o_c   <= i_b;                // MOV, LDI

                        endcase

                end else if (r_busy)

                        o_c <= r_mpy_result;

                reg     r_busy;

                initial r_busy = 1'b0;

                always @(posedge i_clk)

                        r_busy <= (~i_rst)&&(i_ce)&&(i_valid)

                                        &&(i_op[3:1] == 3'h5);

                assign o_busy = r_busy;

                assign o_illegal = 1'b0;

        end endgenerate

        assign  z = (o_c == 32'h0000);

        assign  n = (o_c[31]);

        assign  v = (set_ovfl)&&(pre_sign != o_c[31]);

        assign  o_f = { v, n, c, z };

        initial o_valid = 1'b0;

        always @(posedge i_clk)

                if (i_rst)

                        o_valid <= 1'b0;

                else

                        o_valid <= (i_ce)&&(i_valid)&&(i_op[3:1] != 3'h5)

                                        ||(o_busy);

endmodule