Subversion Repositories zipcpu

///////////////////////////////////////////////////////////////////////////////

//

// Filename:    idecode.v

//

// Project:     Zip CPU -- a small, lightweight, RISC CPU soft core

//

// Purpose:     This RTL file specifies how instructions are to be decoded

//              into their underlying meanings.  This is specifically a version

//      designed to support a "Next Generation", or "Version 2" instruction

//      set as (currently) activated by the OPT_NEW_INSTRUCTION_SET option

//      in cpudefs.v.

//

//      I expect to (eventually) retire the old instruction set, at which point

//      this will become the default instruction set decoder.

//

//

// Creator:     Dan Gisselquist, Ph.D.

//              Gisselquist Technology, LLC

//

///////////////////////////////////////////////////////////////////////////////

//

// Copyright (C) 2015, Gisselquist Technology, LLC

//

// This program is free software (firmware): you can redistribute it and/or

// modify it under the terms of  the GNU General Public License as published

// by the Free Software Foundation, either version 3 of the License, or (at

// your option) any later version.

//

// This program is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// License:     GPL, v3, as defined and found on www.gnu.org,

//              http://www.gnu.org/licenses/gpl.html

//

//

///////////////////////////////////////////////////////////////////////////////

//

//

//

`define CPU_CC_REG      4'he

`define CPU_PC_REG      4'hf

//

`include "cpudefs.v"

//

//

//

module  idecode(i_clk, i_rst, i_ce, i_stalled,

                i_instruction, i_gie, i_pc, i_pf_valid,

                        i_illegal,

                o_phase, o_illegal,

                o_pc, o_gie,

                o_dcdR, o_dcdA, o_dcdB, o_I, o_zI,

                o_cond, o_wF,

                o_op, o_ALU, o_M, o_DV, o_FP, o_break, o_lock,

                o_wR, o_rA, o_rB,

                o_early_branch, o_branch_pc, o_ljmp,

                o_pipe

                );

        parameter       ADDRESS_WIDTH=24, IMPLEMENT_MPY=1, EARLY_BRANCHING=1,

                        IMPLEMENT_DIVIDE=1, IMPLEMENT_FPU=0, AW = ADDRESS_WIDTH;

        input                   i_clk, i_rst, i_ce, i_stalled;

        input   [31:0]           i_instruction;

        input                   i_gie;

        input   [(AW-1):0]       i_pc;

        input                   i_pf_valid, i_illegal;

        output  wire            o_phase;

        output  reg             o_illegal;

        output  reg     [(AW-1):0]       o_pc;

        output  reg             o_gie;

        output  reg     [6:0]    o_dcdR, o_dcdA, o_dcdB;

        output  wire    [31:0]   o_I;

        output  reg             o_zI;

        output  reg     [3:0]    o_cond;

        output  reg             o_wF;

        output  reg     [3:0]    o_op;

        output  reg             o_ALU, o_M, o_DV, o_FP, o_break, o_lock;

        output  reg             o_wR, o_rA, o_rB;

        output  wire            o_early_branch;

        output  wire    [(AW-1):0]       o_branch_pc;

        output  wire            o_ljmp;

        output  reg             o_pipe;

        wire    dcdA_stall, dcdB_stall, dcdF_stall;

        wire                    o_dcd_early_branch;

        wire    [(AW-1):0]       o_dcd_branch_pc;

        reg     o_dcdI, o_dcdIz;

        wire    [4:0]    w_op;

        wire            w_ldi, w_mov, w_cmptst, w_ldixx, w_ALU;

        wire    [4:0]    w_dcdR, w_dcdB, w_dcdA;

        wire            w_dcdR_pc, w_dcdR_cc;

        wire            w_dcdA_pc, w_dcdA_cc;

        wire            w_dcdB_pc, w_dcdB_cc;

        wire    [3:0]    w_cond;

        wire            w_wF, w_dcdM, w_dcdDV, w_dcdFP;

        wire            w_wR, w_rA, w_rB, w_wR_n;

        wire            w_ljmp;

        generate

        if (EARLY_BRANCHING != 0)

                assign  w_ljmp = (iword == 32'h7c87c000);

        else

                assign  w_ljmp = 1'b0;

        endgenerate

        wire    [31:0]   iword;

`ifdef  OPT_VLIW

        reg     [16:0]   r_nxt_half;

        assign  iword = (o_phase)

                                // set second half as a NOOP ... but really 

                                // shouldn't matter

                        ? { r_nxt_half[16:7], 1'b0, r_nxt_half[6:0], 5'b11000, 3'h7, 6'h00 }

                        : i_instruction;

`else

        assign  iword = { 1'b0, i_instruction[30:0] };

`endif

        assign  w_op= iword[26:22];

        assign  w_mov    = (w_op      == 5'h0f);

        assign  w_ldi    = (w_op[4:1] == 4'hb);

        assign  w_cmptst = (w_op[4:1] == 4'h8);

        assign  w_ldixx  = (w_op[4:1] == 4'h4);

        assign  w_ALU    = (~w_op[4]);

        // 4 LUTs

        assign  w_dcdR = { ((~iword[31])&&(w_mov)&&(~i_gie))?iword[18]:i_gie,

                                iword[30:27] };

        // 4 LUTs

        assign  w_dcdB = { ((~iword[31])&&(w_mov)&&(~i_gie))?iword[13]:i_gie,

                                iword[17:14] };

        // 0 LUTs

        assign  w_dcdA = w_dcdR;

        // 2 LUTs, 1 delay each

        assign  w_dcdR_pc = (w_dcdR == {i_gie, `CPU_PC_REG});

        assign  w_dcdR_cc = (w_dcdR == {i_gie, `CPU_CC_REG});

        // 0 LUTs

        assign  w_dcdA_pc = w_dcdR_pc;

        assign  w_dcdA_cc = w_dcdR_cc;

        // 2 LUTs, 1 delays each

        assign  w_dcdB_pc = (w_dcdB[3:0] == `CPU_PC_REG);

        assign  w_dcdB_cc = (w_dcdB[3:0] == `CPU_CC_REG);

        // Under what condition will we execute this

        // instruction?  Only the load immediate instruction

        // is completely unconditional.

        //

        // 3+4 LUTs

        assign  w_cond = (w_ldi) ? 4'h8 :

                        (iword[31])?{(iword[20:19]==2'b00),

                                        1'b0,iword[20:19]}

                        : { (iword[21:19]==3'h0), iword[21:19] };

        // 1 LUT

        assign  w_dcdM    = (w_op[4:1] == 4'h9);

        // 1 LUT

        assign  w_dcdDV   = (w_op[4:1] == 4'ha);

        // 1 LUT

        assign  w_dcdFP   = (w_op[4:3] == 2'b11)&&(w_dcdR[3:1] != 3'h7);

        // 4 LUT's--since it depends upon FP/NOOP condition (vs 1 before)

        //      Everything reads A but ... NOOP/BREAK/LOCK, LDI, LOD, MOV

        assign  w_rA     = (w_dcdFP)

                                // Divide's read A

                                ||(w_dcdDV)

                                // ALU read's A, unless it's a MOV to A

                                // This includes LDIHI/LDILO

                                ||((~w_op[4])&&(w_op[3:0]!=4'hf))

                                // STO's read A

                                ||((w_dcdM)&&(w_op[0]))

                                // Test/compares

                                ||(w_op[4:1]== 4'h8);

        // 1 LUTs -- do we read a register for operand B?  Specifically, do

        // we need to stall if the register is not (yet) ready?

        assign  w_rB     = (w_mov)||((iword[18])&&((~w_ldi)&&(~w_ldixx)));

        // 1 LUT: All but STO, NOOP/BREAK/LOCK, and CMP/TST write back to w_dcdR

        assign  w_wR_n   = ((w_dcdM)&&(w_op[0]))

                                ||((w_op[4:3]==2'b11)&&(w_dcdR[3:1]==3'h7))

                                ||(w_cmptst);

        assign  w_wR     = ~w_wR_n;

        //

        // 1-output bit (5 Opcode bits, 4 out-reg bits, 3 condition bits)

        //      

        //      This'd be 4 LUTs, save that we have the carve out for NOOPs

        //      and writes to the PC/CC register(s).

        assign  w_wF     = (w_cmptst)

                        ||((w_cond[3])&&((w_dcdFP)||(w_dcdDV)

                                ||((w_ALU)&&(~w_mov)&&(~w_ldixx)

                                        &&(iword[30:28] != 3'h7))));

        // Bottom 13 bits: no LUT's

        // w_dcd[12: 0] -- no LUTs

        // w_dcd[   13] -- 2 LUTs

        // w_dcd[17:14] -- (5+i0+i1) = 3 LUTs, 1 delay

        // w_dcd[22:18] : 5 LUTs, 1 delay (assuming high bit is o/w determined)

        reg     [22:0]   r_I;

        wire    [22:0]   w_I, w_fullI;

        wire            w_Iz;

        assign  w_fullI = (w_ldi) ? { iword[22:0] } // LDI

                        :((w_mov) ?{ {(23-13){iword[12]}}, iword[12:0] } // Move

                        :((~iword[18]) ? { {(23-18){iword[17]}}, iword[17:0] }

                        : { {(23-14){iword[13]}}, iword[13:0] }

                        ));

`ifdef  OPT_VLIW

        wire    [5:0]    w_halfI;

        assign  w_halfI = (w_ldi) ? iword[5:0]

                                :((iword[5]) ? 6'h00 : {iword[4],iword[4:0]});

        assign  w_I  = (iword[31])? {{(23-6){w_halfI[5]}}, w_halfI }:w_fullI;

`else

        assign  w_I  = w_fullI;

`endif

        assign  w_Iz = (w_I == 0);

`ifdef  OPT_VLIW

        //

        // The o_phase parameter is special.  It needs to let the software

        // following know that it cannot break/interrupt on an o_phase asserted

        // instruction, lest the break take place between the first and second

        // half of a VLIW instruction.  To do this, o_phase must be asserted

        // when the first instruction half is valid, but not asserted on either

        // a 32-bit instruction or the second half of a 2x16-bit instruction.

        reg     r_phase;

        initial r_phase = 1'b0;

        always @(posedge i_clk)

                if (i_rst) // When no instruction is in the pipe, phase is zero

                        r_phase <= 1'b0;

                else if (i_ce)

                        r_phase <= (o_phase)? 1'b0:(i_instruction[31]);

        // Phase is '1' on the first instruction of a two-part set

        // But, due to the delay in processing, it's '1' when our output is

        // valid for that first part, but that'll be the same time we

        // are processing the second part ... so it may look to us like a '1'

        // on the second half of processing.

        assign  o_phase = r_phase;

`else

        assign  o_phase = 1'b0;

`endif

        initial o_illegal = 1'b0;

        always @(posedge i_clk)

                if (i_rst)

                        o_illegal <= 1'b0;

                else if (i_ce)

                begin

`ifdef  OPT_VLIW

                        o_illegal <= (i_illegal);

`else

                        o_illegal <= ((i_illegal) || (i_instruction[31]));

`endif

                        if ((IMPLEMENT_MPY!=1)&&(w_op[4:1]==4'h5))

                                o_illegal <= 1'b1;

                        if ((IMPLEMENT_DIVIDE==0)&&(w_dcdDV))

                                o_illegal <= 1'b1;

                        else if ((IMPLEMENT_DIVIDE!=0)&&(w_dcdDV)&&(w_dcdR[3:1]==3'h7))

                                o_illegal <= 1'b1;

                        if ((IMPLEMENT_FPU!=0)&&(w_dcdFP)&&(w_dcdR[3:1]==3'h7))

                                o_illegal <= 1'b1;

                        else if ((IMPLEMENT_FPU==0)&&(w_dcdFP))

                                o_illegal <= 1'b1;

                        if ((w_op[4:3]==2'b11)&&(w_dcdR[3:1]==3'h7)

                                &&(

                                        (w_op[2:0] != 3'h2)      // LOCK

                                        &&(w_op[2:0] != 3'h1)    // BREAK

                                        &&(w_op[2:0] != 3'h0)))  // NOOP

                                o_illegal <= 1'b1;

                end

        always @(posedge i_clk)

                if (i_ce)

                begin

`ifdef  OPT_VLIW

                        if (~o_phase)

                        begin

                                o_gie<= i_gie;

                                // i.e. dcd_pc+1

                                o_pc <= i_pc+{{(AW-1){1'b0}},1'b1};

                        end

`else

                        o_gie<= i_gie;

                        o_pc <= i_pc+{{(AW-1){1'b0}},1'b1};

`endif

                        // Under what condition will we execute this

                        // instruction?  Only the load immediate instruction

                        // is completely unconditional.

                        o_cond <= w_cond;

                        // Don't change the flags on conditional instructions,

                        // UNLESS: the conditional instruction was a CMP

                        // or TST instruction.

                        o_wF <= w_wF;

                        // Record what operation/op-code (4-bits) we are doing

                        //      Note that LDI magically becomes a MOV

                        //      instruction here.  That way it's a pass through

                        //      the ALU.  Likewise, the two compare instructions

                        //      CMP and TST becomes SUB and AND here as well.

                        // We keep only the bottom four bits, since we've

                        // already done the rest of the decode necessary to 

                        // settle between the other instructions.  For example,

                        // o_FP plus these four bits uniquely defines the FP

                        // instruction, o_DV plus the bottom of these defines

                        // the divide, etc.

                        o_op <= (w_ldi)? 4'hf:w_op[3:0];

                        // Default values

                        o_dcdR <= { w_dcdR_cc, w_dcdR_pc, w_dcdR};

                        o_dcdA <= { w_dcdA_cc, w_dcdA_pc, w_dcdA};

                        o_dcdB <= { w_dcdB_cc, w_dcdB_pc, w_dcdB};

                        o_wR  <= w_wR;

                        o_rA  <= w_rA;

                        o_rB  <= w_rB;

                        r_I    <= w_I;

                        o_zI   <= w_Iz;

                        o_ALU  <=  (w_ALU)||(w_ldi)||(w_cmptst); // 1 LUT

                        o_M    <=  w_dcdM;

                        o_DV   <=  w_dcdDV;

                        o_FP   <=  w_dcdFP;

                        o_break <= (w_op[4:3]==2'b11)&&(w_dcdR[3:1]==3'h7)&&(w_op[2:0]==3'b001);

                        o_lock  <= (w_op[4:3]==2'b11)&&(w_dcdR[3:1]==3'h7)&&(w_op[2:0]==3'b010);

`ifdef  OPT_VLIW

                        r_nxt_half <= { iword[31], iword[13:5],

                                ((iword[21])? iword[20:19] : 2'h0),

                                iword[4:0] };

`endif

                end

        generate

        if (EARLY_BRANCHING!=0)

        begin

                reg                     r_early_branch, r_ljmp;

                reg     [(AW-1):0]       r_branch_pc;

                initial r_ljmp = 1'b0;

                always @(posedge i_clk)

                        if (i_rst)

                                r_ljmp <= 1'b0;

                        else if ((i_ce)&&(i_pf_valid))

                                r_ljmp <= (w_ljmp);

                assign  o_ljmp = r_ljmp;

                always @(posedge i_clk)

                if (i_rst)

                        r_early_branch <= 1'b0;

                else if ((i_ce)&&(i_pf_valid))

                begin

                        if (r_ljmp)

                                // LOD (PC),PC

                                r_early_branch <= 1'b1;

                        else if ((~iword[31])&&(iword[30:27]==`CPU_PC_REG)&&(w_cond[3]))

                        begin

                                if (w_op[4:1] == 4'hb) // LDI to PC

                                        // LDI x,PC

                                        r_early_branch     <= 1'b1;

                                else if ((w_op[4:0]==5'h02)&&(~iword[18]))

                                        // Add x,PC

                                        r_early_branch     <= 1'b1;

                                else begin

                                        r_early_branch     <= 1'b0;

                                end

                        end else

                                r_early_branch <= 1'b0;

                end else if (i_ce)

                        r_early_branch <= 1'b0;

                always @(posedge i_clk)

                        if (i_ce)

                        begin

                                if (r_ljmp)

                                        r_branch_pc <= iword[(AW-1):0];

                                else if (w_op[4:1] == 4'hb) // LDI

                                        r_branch_pc <= {{(AW-23){iword[22]}},iword[22:0]};

                                else // Add x,PC

                                r_branch_pc <= i_pc

                                        + {{(AW-17){iword[17]}},iword[16:0]}

                                        + {{(AW-1){1'b0}},1'b1};

                        end

                assign  o_early_branch     = r_early_branch;

                assign  o_branch_pc        = r_branch_pc;

        end else begin

                assign  o_early_branch = 1'b0;

                assign  o_branch_pc = {(AW){1'b0}};

                assign  o_ljmp = 1'b0;

        end endgenerate

        // To be a pipeable operation there must be ...

        //      1. Two valid adjacent instructions

        //      2. Both must be memory operations, of the same time (both lods

        //              or both stos)

        //      3. Both must use the same register base address

        //      4. Both must be to the same address, or the address incremented

        //              by one

        // Note that we're not using iword here ... there's a lot of logic

        // taking place, and it's only valid if the new word is not compressed.

        //

        reg     r_valid;

        always @(posedge i_clk)

                if (i_ce)

                        o_pipe <= (r_valid)&&(i_pf_valid)&&(~i_instruction[31])

                                &&(w_dcdM)&&(o_M)&&(o_op[0] ==i_instruction[22])

                                &&(i_instruction[17:14] == o_dcdB[3:0])

                                &&(i_gie == o_gie)

                                &&((i_instruction[21:19]==o_cond[2:0])

                                        ||(o_cond[2:0] == 3'h0))

                                &&((i_instruction[13:0]==r_I[13:0])

                                        ||({1'b0, i_instruction[13:0]}==(r_I[13:0]+14'h1)));

        always @(posedge i_clk)

                if (i_rst)

                        r_valid <= 1'b0;

                else if ((i_ce)&&(o_ljmp))

                        r_valid <= 1'b0;

                else if ((i_ce)&&(i_pf_valid))

                        r_valid <= 1'b1;

                else if (~i_stalled)

                        r_valid <= 1'b0;

        assign  o_I = { {(32-22){r_I[22]}}, r_I[21:0] };

endmodule