Subversion Repositories a-z80

//==============================================================

// Test register file block (without reg. control unit)

//==============================================================

`timescale 100 ns/ 100 ns

module test_regfile;

// ----------------- CLOCKS AND RESET -----------------

// Define one full T-clock cycle delay

`define T #2

bit clk = 1;

initial repeat (10) #1 clk = ~clk;

// ----------------- BUSES -----------------

// We have 4 Bi-directional buses that can also be 3-stated:

// On the address-side, there are high and low 8-bit buses

reg  [7:0] db_lo_as;        // Drive it using this bus

wire [7:0] db_lo_as_sig;    // Read it using this bus

reg  [7:0] db_hi_as;        // Drive it using this bus

wire [7:0] db_hi_as_sig;    // Read it using this bus

// ----------------- BUSES -----------------

// On the data-side, there are high and low 8-bit buses

reg  [7:0] db_lo_ds;        // Drive it using this bus

wire [7:0] db_lo_ds_sig;    // Read it using this bus

reg  [7:0] db_hi_ds;        // Drive it using this bus

wire [7:0] db_hi_ds_sig;    // Read it using this bus

// ----------------- CONTROL -----------------

reg ctl_sw_4u_sig;          // Bus switch #4 upstream gate

reg ctl_sw_4d_sig;          // Bus switch #4 downstream gate

// ----------------- GP REGS -----------------

reg reg_sel_af_sig;         // Select AF register

reg reg_sel_af2_sig;        // ...

reg reg_sel_bc_sig;

reg reg_sel_bc2_sig;

reg reg_sel_de_sig;

reg reg_sel_de2_sig;

reg reg_sel_hl_sig;

reg reg_sel_hl2_sig;

reg reg_sel_ix_sig;

reg reg_sel_iy_sig;

reg reg_sel_wz_sig;

reg reg_sel_sp_sig;

reg reg_sel_gp_hi_sig;      // Select high byte of a GP register

reg reg_sel_gp_lo_sig;      // Select low byte of a GP register

reg reg_gp_oe_sig;          // Write selected GP register to the data bus

// ----------------- SYSTEM REGS -----------------

reg reg_sel_pc_sig;         // Select PC register

reg reg_sel_ir_sig;         // Select IR register

reg reg_sel_sys_hi_sig;     // Select high byte of a system register

reg reg_sel_sys_lo_sig;     // Select low byte of a system register

reg reg_sys_oe_sig;         // Write selected system register to the data bus

// ----------------- TEST -------------------

`define CHECK(arg) \

   assert(db_sig===arg);

initial begin

    ctl_sw_4d_sig = 0;

    ctl_sw_4u_sig = 0;

    reg_sel_af_sig = 0;         // Select AF register

    reg_sel_af2_sig = 0;        // ...

    reg_sel_bc_sig = 0;

    reg_sel_bc2_sig = 0;

    reg_sel_de_sig = 0;

    reg_sel_de2_sig = 0;

    reg_sel_hl_sig = 0;

    reg_sel_hl2_sig = 0;

    reg_sel_ix_sig = 0;

    reg_sel_iy_sig = 0;

    reg_sel_wz_sig = 0;

    reg_sel_sp_sig = 0;

    reg_sel_gp_hi_sig = 0;      // Select high byte of a GP register

    reg_sel_gp_lo_sig = 0;      // Select low byte of a GP register

    reg_gp_oe_sig = 0;          // Write selected GP register to the data bus

    reg_sel_pc_sig = 0;         // Select PC register

    reg_sel_ir_sig = 0;         // Select IR register

    reg_sel_sys_hi_sig = 0;     // Select high byte of a system register

    reg_sel_sys_lo_sig = 0;     // Select low byte of a system register

    reg_sys_oe_sig = 0;         // Write selected system register to the data bus

    // Test bidirectional data buses and leave them at Z

    `T  db_lo_as = 8'hAA;

        db_hi_as = 8'h55;

        db_lo_ds   = 8'hCA;

        db_hi_ds   = 8'hFE;

    `T  db_lo_as = 'z;

        db_hi_as = 'z;

        db_lo_ds   = 'z;

        db_hi_ds   = 'z;

    // Store a value in a GP register and read it back

    `T  db_lo_ds = 8'h12;

        db_hi_ds = 8'h34;

        reg_sel_gp_hi_sig = 1;

        reg_sel_gp_lo_sig = 1;

        reg_sel_af_sig = 1;

    `T  db_lo_ds = 'z;

        db_hi_ds = 'z;

        reg_sel_af_sig = 0;

    `T

    `T  reg_sel_gp_hi_sig = 1;

        reg_sel_gp_lo_sig = 1;

        reg_sel_af_sig = 1;

        reg_gp_oe_sig = 1;

    `T

    `T  $display("End of test");

end

// Drive 3-state bidirectional buses with these statements

assign db_lo_as_sig = db_lo_as;

assign db_hi_as_sig = db_hi_as;

assign db_lo_ds_sig = db_lo_ds;

assign db_hi_ds_sig = db_hi_ds;

//--------------------------------------------------------------

// Instantiate register file block

//--------------------------------------------------------------

reg_file reg_file_inst

(

    .reg_sel_sys_lo(reg_sel_sys_lo_sig) ,   // input  reg_sel_sys_lo_sig

    .reg_sel_gp_lo(reg_sel_gp_lo_sig) ,     // input  reg_sel_gp_lo_sig

    .reg_sel_sys_hi(reg_sel_sys_hi_sig) ,   // input  reg_sel_sys_hi_sig

    .reg_sel_gp_hi(reg_sel_gp_hi_sig) ,     // input  reg_sel_gp_hi_sig

    .reg_sel_ir(reg_sel_ir_sig) ,           // input  reg_sel_ir_sig

    .reg_sel_pc(reg_sel_pc_sig) ,           // input  reg_sel_pc_sig

    .ctl_sw_4d(ctl_sw_4d_sig) ,             // input  ctl_sw_4d_sig

    .ctl_sw_4u(ctl_sw_4u_sig) ,             // input  ctl_sw_4u_sig

    .reg_sel_wz(reg_sel_wz_sig) ,           // input  reg_sel_wz_sig

    .reg_sel_sp(reg_sel_sp_sig) ,           // input  reg_sel_sp_sig

    .reg_sel_iy(reg_sel_iy_sig) ,           // input  reg_sel_iy_sig

    .reg_sel_ix(reg_sel_ix_sig) ,           // input  reg_sel_ix_sig

    .reg_sel_hl2(reg_sel_hl2_sig) ,         // input  reg_sel_hl2_sig

    .reg_sel_hl(reg_sel_hl_sig) ,           // input  reg_sel_hl_sig

    .reg_sel_de2(reg_sel_de2_sig) ,         // input  reg_sel_de2_sig

    .reg_sel_de(reg_sel_de_sig) ,           // input  reg_sel_de_sig

    .reg_sel_bc2(reg_sel_bc2_sig) ,         // input  reg_sel_bc2_sig

    .reg_sel_bc(reg_sel_bc_sig) ,           // input  reg_sel_bc_sig

    .reg_sel_af2(reg_sel_af2_sig) ,         // input  reg_sel_af2_sig

    .reg_sel_af(reg_sel_af_sig) ,           // input  reg_sel_af_sig

    .reg_gp_we(reg_gp_we_sig) ,             // input  reg_gp_we_sig

    .reg_sys_we_lo(reg_sys_we_lo_sig) ,     // input  reg_sys_we_lo_sig

    .reg_sys_we_hi(reg_sys_we_hi_sig) ,     // input  reg_sys_we_hi_sig

    .ctl_reg_in_hi(ctl_reg_in_hi_sig) ,     // input  ctl_reg_in_hi_sig

    .ctl_reg_in_lo(ctl_reg_in_lo_sig) ,     // input  ctl_reg_in_lo_sig

    .ctl_reg_out_lo(ctl_reg_out_lo_sig) ,   // input  ctl_reg_out_lo_sig

    .ctl_reg_out_hi(ctl_reg_out_hi_sig) ,   // input  ctl_reg_out_hi_sig

    .clk(clk) ,                             // input  clk_sig

    .db_lo_ds(db_lo_ds_sig) ,               // inout [7:0] db_lo_ds_sig

    .db_hi_ds(db_hi_ds_sig) ,               // inout [7:0] db_hi_ds_sig

    .db_lo_as(db_lo_as_sig) ,               // inout [7:0] db_lo_as_sig

    .db_hi_as(db_hi_as_sig)                 // inout [7:0] db_hi_as_sig

);

endmodule