Subversion Repositories astron_diagnostics

-------------------------------------------------------------------------------

--

-- Copyright 2020

-- ASTRON (Netherlands Institute for Radio Astronomy) <http://www.astron.nl/>

-- P.O.Box 2, 7990 AA Dwingeloo, The Netherlands

-- 

-- Licensed under the Apache License, Version 2.0 (the "License");

-- you may not use this file except in compliance with the License.

-- You may obtain a copy of the License at

-- 

--     http://www.apache.org/licenses/LICENSE-2.0

-- 

-- Unless required by applicable law or agreed to in writing, software

-- distributed under the License is distributed on an "AS IS" BASIS,

-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-- See the License for the specific language governing permissions and

-- limitations under the License.

--

-------------------------------------------------------------------------------

-- Purpose: MM data buffer and Rx seq for multiple parallel SOSI streams

-- Description:                             

-- . g_use_db

--   The mms_diag_data_buffer can capture data from an input stream in a data

--   buffer when g_use_db=TRUE. Dependend on g_buf_use_sync the data buffer

--   is rewritten after each in_sync or when the last word was read via MM.

-- . g_use_rx_seq

--   The mms_diag_data_buffer can continously verify a input Rx data sequence

--   when g_use_rx_seq=TRUE. The expected sequence data is typically generated

--   by an remote upstream tx_seq source.

-- . The advantage of the rx_seq is that is can continously verify the

--   correctness of all rx data in hardware, whereas the DB can only take a

--   snapshot that then needs to be examined via MM. The advandage of the DB

--   is that it can take a snapshot of the values of the received data. The

--   DB requires RAM resources and the rx_seq does not.

--

-- Block diagram:

--

--                           g_use_db 

--                           g_buf_use_sync

--                              .

--                              .      g_use_tx_seq

--                              .          .

--                              .          .

--                      /-------------> Rx seq 

--                      |       .         |

--     in_sosi_arr -----*---> DB RAM      |

--     in_sync -------------> DB reg      |

--                              ||        |

--                              ||        |

--              MM ================================

--

-- Remark:

-- . A nice new feature would be to continuously write the DB and to stop

--   writting it on a trigger. This trigger can then eg. be when the rx_seq

--   detects an error. By delaying the trigger somewhat it the DB can then

--   capture some data before and after the trigger event.

LIBRARY IEEE, common_pkg_lib, dp_pkg_lib, astron_ram_lib, astron_mm_lib;

USE IEEE.STD_LOGIC_1164.ALL;

USE IEEE.NUMERIC_STD.ALL;

USE common_pkg_lib.common_pkg.ALL;

USE astron_ram_lib.common_ram_pkg.ALL;

USE dp_pkg_lib.dp_stream_pkg.ALL;

USE work.diag_pkg.ALL;

--USE technology_lib.technology_select_pkg.ALL;

ENTITY mms_diag_data_buffer IS

  GENERIC (

    g_technology   : NATURAL := 0;

    -- Generate configurations

    g_use_db       : BOOLEAN := TRUE;

    g_use_rx_seq   : BOOLEAN := FALSE;

    -- General

    g_nof_streams  : POSITIVE := 16;    -- each stream gets an data buffer

    -- DB settings

    g_data_type    : t_diag_data_type_enum := e_data;      -- define the sosi field that gets stored: e_data=data, e_complex=im&re, e_real=re, e_imag=im

    g_data_w       : NATURAL := 32;     -- the g_data_w is the width of the data, re, im values or of the combined im&re value

    g_buf_nof_data : NATURAL := 1024;   -- nof words per data buffer

    g_buf_use_sync : BOOLEAN := FALSE;  -- when TRUE start filling the buffer at the in_sync, else after the last word was read

    -- Rx_seq

    g_use_steps    : BOOLEAN := FALSE;

    g_nof_steps    : NATURAL := c_diag_seq_rx_reg_nof_steps;

    g_seq_dat_w    : NATURAL := 32  -- >= 1, test sequence data width. Choose g_seq_dat_w <= g_data_w

  );

  PORT (

    -- System

    mm_rst            : IN  STD_LOGIC;

    mm_clk            : IN  STD_LOGIC;

    dp_rst            : IN  STD_LOGIC;

    dp_clk            : IN  STD_LOGIC;

    -- MM interface

    reg_data_buf_mosi : IN  t_mem_mosi := c_mem_mosi_rst;  -- DB control register (one per stream)

    reg_data_buf_miso : OUT t_mem_miso;

    ram_data_buf_mosi : IN  t_mem_mosi := c_mem_mosi_rst;  -- DB buffer RAM (one per streams)

    ram_data_buf_miso : OUT t_mem_miso;

    reg_rx_seq_mosi   : IN  t_mem_mosi := c_mem_mosi_rst;  -- Rx seq control register (one per streams)

    reg_rx_seq_miso   : OUT t_mem_miso;

    -- ST interface

    in_sync           : IN  STD_LOGIC := '0';  -- input sync pulse in ST dp_clk domain that starts data buffer when g_use_in_sync = TRUE

    in_sosi_arr       : IN t_dp_sosi_arr(g_nof_streams-1 DOWNTO 0)

  );

END mms_diag_data_buffer;

ARCHITECTURE str OF mms_diag_data_buffer IS

  CONSTANT c_buf_mm_factor   : NATURAL := ceil_div(g_data_w, c_word_w);

  CONSTANT c_buf_nof_data_mm : NATURAL := g_buf_nof_data*c_buf_mm_factor;

  CONSTANT c_buf_adr_w : NATURAL := ceil_log2(c_buf_nof_data_mm);

  CONSTANT c_reg_adr_w : NATURAL := c_diag_db_reg_adr_w;

  TYPE t_data_arr IS ARRAY (INTEGER RANGE <>) OF STD_LOGIC_VECTOR(g_data_w-1 DOWNTO 0);

  SIGNAL in_data_arr           : t_data_arr(g_nof_streams-1 DOWNTO 0);

  SIGNAL ram_data_buf_mosi_arr : t_mem_mosi_arr(g_nof_streams-1 DOWNTO 0);

  SIGNAL ram_data_buf_miso_arr : t_mem_miso_arr(g_nof_streams-1 DOWNTO 0);

  SIGNAL reg_data_buf_mosi_arr : t_mem_mosi_arr(g_nof_streams-1 DOWNTO 0);

  SIGNAL reg_data_buf_miso_arr : t_mem_miso_arr(g_nof_streams-1 DOWNTO 0);

BEGIN

  no_db : IF g_use_db=FALSE GENERATE

    ram_data_buf_miso <= c_mem_miso_rst;

    reg_data_buf_miso <= c_mem_miso_rst;

  END GENERATE;

  gen_db : IF g_use_db=TRUE GENERATE

    -- Combine the internal array of mm interfaces for the data_buf to one array that is connected to the port of the MM bus

    u_mem_mux_data_buf : ENTITY astron_mm_lib.common_mem_mux

    GENERIC MAP (

      g_nof_mosi    => g_nof_streams,

      g_mult_addr_w => c_buf_adr_w

    )

    PORT MAP (

      mosi     => ram_data_buf_mosi,

      miso     => ram_data_buf_miso,

      mosi_arr => ram_data_buf_mosi_arr,

      miso_arr => ram_data_buf_miso_arr

    );

    u_mem_mux_reg : ENTITY astron_mm_lib.common_mem_mux

    GENERIC MAP (

      g_nof_mosi    => g_nof_streams,

      g_mult_addr_w => c_reg_adr_w

    )

    PORT MAP (

      mosi     => reg_data_buf_mosi,

      miso     => reg_data_buf_miso,

      mosi_arr => reg_data_buf_mosi_arr,

      miso_arr => reg_data_buf_miso_arr

    );

    gen_stream : FOR I IN 0 TO g_nof_streams-1 GENERATE

      in_data_arr(I) <= in_sosi_arr(I).im(g_data_w/2-1 DOWNTO 0) & in_sosi_arr(I).re(g_data_w/2-1 DOWNTO 0) WHEN g_data_type=e_complex ELSE

                        in_sosi_arr(I).re(g_data_w-1 DOWNTO 0)                                              WHEN g_data_type=e_real ELSE

                        in_sosi_arr(I).im(g_data_w-1 DOWNTO 0)                                              WHEN g_data_type=e_imag ELSE

                        in_sosi_arr(I).data(g_data_w-1 DOWNTO 0);                                             -- g_data_type=e_data is default

      u_diag_data_buffer : ENTITY work.diag_data_buffer

      GENERIC MAP (

        g_technology  => g_technology,

        g_data_w      => g_data_w,

        g_nof_data    => g_buf_nof_data,

        g_use_in_sync => g_buf_use_sync   -- when TRUE start filling the buffer at the in_sync, else after the last word was read

      )

      PORT MAP (

        -- Memory-mapped clock domain

        mm_rst      => mm_rst,

        mm_clk      => mm_clk,

        ram_mm_mosi => ram_data_buf_mosi_arr(I),

        ram_mm_miso => ram_data_buf_miso_arr(I),

        reg_mm_mosi => reg_data_buf_mosi_arr(I),

        reg_mm_miso => reg_data_buf_miso_arr(I),

        -- Streaming clock domain

        st_rst      => dp_rst,

        st_clk      => dp_clk,

        in_data     => in_data_arr(I),

        in_sync     => in_sync,

        in_val      => in_sosi_arr(I).valid

      );

    END GENERATE;

  END GENERATE;

  no_rx_seq : IF g_use_rx_seq=FALSE GENERATE

    reg_rx_seq_miso <= c_mem_miso_rst;

  END GENERATE;

  gen_rx_seq : IF g_use_rx_seq=TRUE GENERATE

    u_mms_diag_rx_seq : ENTITY work.mms_diag_rx_seq

    GENERIC MAP (

      g_nof_streams => g_nof_streams,

      g_use_steps   => g_use_steps,

      g_nof_steps   => g_nof_steps,

      g_seq_dat_w   => g_seq_dat_w,  -- >= 1, test sequence data width

      g_data_w      => g_data_w      -- >= g_seq_dat_w, user data width

    )

    PORT MAP (

      -- Clocks and reset

      mm_rst         => mm_rst,

      mm_clk         => mm_clk,

      dp_rst         => dp_rst,

      dp_clk         => dp_clk,

      -- Memory Mapped Slave

      reg_mosi       => reg_rx_seq_mosi,   -- multiplexed port for g_nof_streams MM control/status registers

      reg_miso       => reg_rx_seq_miso,

      -- Streaming interface

      rx_snk_in_arr  => in_sosi_arr

    );

  END GENERATE;

END str;