URL https://opencores.org/ocsvn/ddr3_synthesizable_bfm/ddr3_synthesizable_bfm/trunk

Subversion Repositories ddr3_synthesizable_bfm

[/] [ddr3_synthesizable_bfm/] [trunk/] [rtl/] [ddr3_simple4.v] - Blame information for rev 5

Go to most recent revision | Details | Compare with Previous | View Log


/*
*DDR3 Simple Synthesizable Memory BFM
*2010-2011 sclai <laikos@yahoo.com>
*
*This library is free software; you can redistribute it and/or modify it
* under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation; either version 2.1 of the License,
* or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
* USA
*
*
*  Simple implementation of DDR3 Memory
*  will only reponse to write and read request
*  parameter
*  count start from t0,t2,t2...
*  ck _|-|_|-|_|-|_|-|_
*
*  cs#---|___|---------
*
*        |   |    |
*        t0  t1  t2 ....
*
*
*/
 
`timescale 1ps / 1ps
 
module ddr3_simple4#(
parameter MEM_DQ_WIDTH          =8,
parameter MEM_BA_WIDTH          =3,
parameter MEM_ROW_WIDTH         =13,
parameter MEM_COL_WIDTH         =13,
parameter MEM_AL                =0,
parameter MEM_CWL               =8, //CWL
parameter MEM_CL                =6  //CL
)(
input wire [MEM_ROW_WIDTH-1:0]   a,
input wire [ MEM_BA_WIDTH-1:0]   ba,
input wire                      ck,
input wire                      ck_n,
input wire                      cke,
input wire                      cs_n,
input wire                      dm,
input wire                      ras_n,
input wire                      cas_n,
input wire                      we_n,
input wire                      reset_n,
inout wire [MEM_DQ_WIDTH-1:0]    dq,
inout wire                      dqs,
inout wire                      dqs_n,
input wire                      odt
);
 
//convert actual CL and CWL parameter to 
 
//definitions
localparam      OPCODE_PRECHARGE = 4'b0010;
localparam      OPCODE_ACTIVATE  = 4'b0011;
localparam      OPCODE_WRITE     = 4'b0100;
localparam      OPCODE_READ      = 4'b0101;
localparam      OPCODE_MRS       = 4'b0000;
localparam      OPCODE_REFRESH   = 4'b0001;
localparam      OPCODE_DES       = 4'b1000;
localparam      OPCODE_ZQC       = 4'b0110;
localparam      OPCODE_NOP       = 4'b0111;
 
//mode registers
reg [31:0] mr0;
reg [31:0] mr2;
reg [31:0] mr3;
 
 
wire [35:0] write_add;
wire [35:0] read_add;
wire [3:0]  write_cmd;
wire [3:0]  read_cmd;
(* keep *)wire [(MEM_DQ_WIDTH*2)-1:0] read_data;
 
reg [ 2:0] last_bank;
reg [15:0] last_row;
reg [3:0] last_write_cmd;
reg [3:0] last_read_cmd;
reg [35:0] last_write_add;
reg [35:0] last_read_add;
 
reg        write_address12;
reg        read_address12;
 
//bank tracker
reg [MEM_ROW_WIDTH-1:0]opened_row[(2**MEM_BA_WIDTH)-1:0];
//row  tracker
 
wire [MEM_DQ_WIDTH-1:0]  dq_out;
reg  [MEM_DQ_WIDTH-1:0]  dq_in0;
 
(* keep *) wire [MEM_DQ_WIDTH-1:0] data_hi;
(* keep *) wire [MEM_DQ_WIDTH-1:0] data_lo;
(* keep *) wire                   data_hi_dm;
(* keep *) wire                   data_lo_dm;
//IDDR
my_iddrx8 iddrx8_inst(
        .clk(ck),
        .io(dq),
        .d0(data_lo),
        .d1(data_hi)
);
 
my_iddrx8 iddrx8_dm_inst(
        .clk(ck),
        .io(dm),
        .d0(data_lo_dm),
        .d1(data_hi_dm)
);
 
//ODDR
my_oddrx8 oddrx8_inst(
.clk(ck),
.d0(read_data[ MEM_DQ_WIDTH-1:0              ]),
.d1(read_data[(MEM_DQ_WIDTH*2)-1:MEM_DQ_WIDTH]),
.io(dq_out)
);
 
//double data rate
always @(posedge ck )
begin
if(reset_n==1'b0)
        begin
                last_bank     <=4'h0;
                last_row      <=16'h0000;
        end
else
begin
        case({cs_n,ras_n,cas_n,we_n})
        /*
        OPCODE_PRECHARGE        :begin
                                        $display("t=%d,PRECHARGE",vip_clk);
                                end
        */
        OPCODE_ACTIVATE         :begin
                                        opened_row [ba] <={{(16-MEM_ROW_WIDTH){1'b0}},a[MEM_ROW_WIDTH-1:0]};
                                end
        /*
        OPCODE_DES              :begin
                                        $display("t=%d,DES",vip_clk);
                                end
        OPCODE_MRS              :begin
                                        $display("t=%d,MRS",vip_clk);
                                end
        OPCODE_NOP              :begin
                                        //$display("t=%d,NOP",vip_clk);
                                end
        */
        OPCODE_READ             :begin
                                        last_read_add   <={ba,opened_row[ba],{{(16-MEM_COL_WIDTH){1'b0}},a[MEM_COL_WIDTH-1:0]}};
                                        last_read_cmd   <=OPCODE_READ;
                                end
        OPCODE_WRITE            :begin
                                        last_write_add  <={ba,opened_row[ba],{{(16-MEM_COL_WIDTH){1'b0}},a[MEM_COL_WIDTH-1:0]}};
                                        last_write_cmd  <=OPCODE_WRITE;
                                end
                                                        /*
        OPCODE_ZQC              :begin
                                $display("t=%d,ZQC",vip_clk);
                                        end*/
                default:begin
                                last_read_cmd   <=OPCODE_NOP;
                                last_write_cmd <=OPCODE_NOP;
                        end
        endcase
end // end reset        
end // end always@(*)
 
 
 
//cmd
//read
ddr3_sr4 #(
.PIPE_LEN(MEM_CL)
)ddr3_read_cmd_sr(
        .clk(ck),
        .shift_in(last_read_cmd),
        .shift_out(read_cmd)
);
//bank, row, col
ddr3_sr36 #(
.PIPE_LEN(MEM_CL+1)
)ddr3_read_add_sr(
        .clk(ck),
        .shift_in(last_read_add),
        .shift_out(read_add)
);
 
//cmd
//write
ddr3_sr4#(
.PIPE_LEN(MEM_CWL)
)ddr3_write_cmd_sr(
        .clk(ck),
        .shift_in(last_write_cmd),
        .shift_out(write_cmd)
);
 
//bank, row, col
ddr3_sr36#(
.PIPE_LEN(MEM_CWL+1) //have to be a cycle late to wait for IDDR latency
) ddr3_write_add_sr(
        .clk(ck),
        .shift_in(last_write_add),
        .shift_out(write_add)
);
 
 
//write fsm
localparam WR_D0        =4'd0;
localparam WR_D1        =4'd1;
localparam WR_D2        =4'd2;
localparam WR_D3        =4'd3;
localparam WR_IDLE      =4'd5;
reg [3:0] write_state;
reg              mem_we;
reg [2:0] write_col;
always@(posedge ck)
begin
        if(reset_n==1'b0)
                begin
                        write_state<=WR_IDLE;
                        mem_we<=1'b0;
                        write_col<=0;
                end
        else
                begin
                case(write_state)
                        WR_IDLE:begin
                        write_col<=0;
                        if(write_cmd==OPCODE_WRITE)
                                begin
                                        write_state<=WR_D0;
                                        mem_we<=1'b1;
                                end
                        else
                                begin
                                        write_state<=WR_IDLE;
                                        mem_we<=1'b0;
                                end
                        end
                        WR_D0:begin
                                write_address12<=write_add[12];
                                write_state<=WR_D1;
                                write_col<=write_col+1'b1;
                                $display("%m: at time %t\tWRITE BANK[%x]\tROW[%x]\tCOL[%x]\tWR D0: %x-%x",$time,write_add[34:32],write_add[31:16],write_add[15:0],data_hi,data_lo);
                        end
                        WR_D1:begin
                                if(write_address12==1'b1)
                                        begin
                                                write_state<=WR_D2;
                                                write_col<=write_col+1'b1;
                                        end
                                else if (write_cmd==OPCODE_WRITE)
                                        begin
                                                write_state<=WR_D0;
                                                write_col<=0;
                                        end
                                else
                                        begin
                                                write_state<=WR_IDLE;
                                                mem_we<=1'b0;
                                        end
                                $display("%m: at time %t\tWRITE BANK[%x]\tROW[%x]\tCOL[%x]\tWR D1: %x-%x",$time,write_add[34:32],write_add[31:16],write_add[15:0],data_hi,data_lo);
                        end
                        WR_D2:begin
                                write_state<=WR_D3;
                                write_col<=write_col+1'b1;
                                $display("%m: at time %t\tWRITE BANK[%x]\tROW[%x]\tCOL[%x]\tWR D2: %x-%x",$time,write_add[34:32],write_add[31:16],write_add[15:0],data_hi,data_lo);
                        end
                        WR_D3:begin
                                $display("%m: at time %t\tWRITE BANK[%x]\tROW[%x]\tCOL[%x]\tWR D3: %x-%x",$time,write_add[34:32],write_add[31:16],write_add[15:0],data_hi,data_lo);
 
                                //write_col<=write_col+1'b1;    
                                if (write_cmd==OPCODE_WRITE)
                                        begin
                                                write_state<=WR_D0;
                                                write_col<=0;
                                        end
                                else
                                        begin
                                                write_state<=WR_IDLE;
                                                mem_we<=1'b0;
                                        end
                        end
                endcase
                end //endif
end
 
 
//read fsm
localparam RD_D0        =4'd0;
localparam RD_D1        =4'd1;
localparam RD_D2        =4'd2;
localparam RD_D3        =4'd3;
localparam RD_IDLE      =4'd5;
 
reg [3:0] read_state;
reg [2:0] read_col;
reg              send_dq;
reg              send_dqs0;
reg              send_dqs1;
 
always@(posedge ck)
begin
        if(reset_n==1'b0)
                begin
                        read_state<=RD_IDLE;
                        read_col         <=0;
                        send_dq  <=0;
                end
        else
                begin
                        case(read_state)
                        RD_IDLE:begin
                        read_col<=0;
                        send_dq<=0;
                        if(read_cmd==OPCODE_READ)
                                begin
                                        read_state<=RD_D0;
                                end
                        else
                                begin
                                        read_state<=RD_IDLE;
                                end
                        end
                        RD_D0:begin
                                read_address12<=read_add[12];
                                read_state<=RD_D1;
                                read_col<=read_col+1'b1;
                                send_dq  <=1'b1;
                                $display("%m: at time %t\tREAD BANK[%x]\tROW[%x]\tCOL[%x]\tRD D0",$time,read_add[34:32],read_add[31:16],read_add[15:0]);
                        end
                        RD_D1:begin
                                if(read_address12==1'b1)
                                        begin
                                                read_state<=RD_D2;
                                                read_col<=read_col+1'b1;
                                        end
                                else if (read_cmd==OPCODE_READ)
                                        begin
                                                read_state<=RD_D0;
                                                read_col<=0;
                                                send_dq  <=1'b1;
                                        end
                                else
                                        begin
                                                read_state<=RD_IDLE;
                                                //send_dq        <=1'b0;
                                        end
                                $display("%m: at time %t\tREAD BANK[%x]\tROW[%x]\tCOL[%x]\tRD D1",$time,read_add[34:32],read_add[31:16],read_add[15:0]);
                        end
                        RD_D2:begin
                                read_state<=RD_D3;
                                read_col<=read_col+1'b1;
                                send_dq  <=1'b1;
                                $display("%m: at time %t\tREAD BANK[%x]\tROW[%x]\tCOL[%x]\tRD D2",$time,read_add[34:32],read_add[31:16],read_add[15:0]);
                        end
                        RD_D3:begin
                                //write_col<=write_col+1'b1;    
                                if (read_cmd==OPCODE_READ)
                                        begin
                                                read_state<=RD_D0;
                                                read_col<=0;
                                                send_dq  <=1'b1;
                                        end
                                else
                                        begin
                                                read_state<=RD_IDLE;
                                                read_col<=0;
                                                //send_dq        <=1'b0;
                                        end
                                        $display("%m: at time %t\tREAD BANK[%x]\tROW[%x]\tCOL[%x]\tRD D3",$time,read_add[34:32],read_add[31:16],read_add[15:0]);
                        end
                        endcase
                end
 
end //end always
 
//dqs fsm
always @(posedge ck_n)
begin
if(reset_n==1'b0)
        begin
                send_dqs1<=0;
                send_dqs0<=0;
        end
else
        begin
                if(read_cmd==OPCODE_READ)
                        begin
                                send_dqs1<=1'b1;
                        end
                else
                        begin
                                send_dqs1<=1'b0;
                        end
        end
send_dqs0<=send_dqs1;
end//end always
 
//ram here
dport_ram  #(
        .DATA_WIDTH(MEM_DQ_WIDTH), //data_hi,data_lo
        .ADDR_WIDTH(36)
)dport_ram_hi(
        .clk                    (ck),
        .di                     (data_hi),
        .read_addr      (read_add+read_col),
        .write_addr (write_add+write_col),
        .we                     (mem_we & data_hi_dm),
        .do                     (read_data[15:8])
);
 
dport_ram  #(
        .DATA_WIDTH(MEM_DQ_WIDTH), //data_hi,data_lo
        .ADDR_WIDTH(36)
)dport_ram_lo(
        .clk                    (ck),
        .di                     (data_lo),
        .read_addr      (read_add+read_col),
        .write_addr (write_add+write_col),
        .we                     (mem_we & data_lo_dm),
        .do                     (read_data[7:0])
);
assign dqs  =((send_dqs0==1'b1) || (send_dq==1'b1))?ck:1'bz;
assign dqs_n=((send_dqs0==1'b1) || (send_dq==1'b1))?ck_n:1'bz;
assign dq   = (send_dq==1'b1)?dq_out:8'hZZ;
 
/* utility functions to display information
*/
 
initial begin
        $timeformat (-9, 1, " ns", 1);
      end
 
always @(posedge ck )
begin
        case({cs_n,ras_n,cas_n,we_n})
 
        OPCODE_PRECHARGE        :begin
                                        $display("%m: at time %t PRECHARGE ",$time);
                                end
 
        OPCODE_ACTIVATE         :begin
                                        $display("%m: at time %t ACTIVATE - BANK[%x]\tROW[%x]",$time,ba,a);
                                end
 
        OPCODE_DES              :begin
                                        $display("%m: at time %t DES ",$time);
                                end
        OPCODE_MRS      :begin
                                                        $display("%m: at time %t MRS - MR[%d]",$time,ba[1:0]);
                                                        case(ba[1:0])
                                                                2'b00:begin //MR0
                                                                        case(a[1:0]) // burst length
                                                                                2'b00:$display("%m\tBL = BL8 \(Fixed\)");
                                                                                2'b01:$display("%m\tBL = BC4/BL8 OTF");
                                                                                2'b10:$display("%m\tBL = BC4 (Fixed)");
                                                                                2'b11:$display("%m\tBL = Reserved");
                                                                        endcase
 
                                                                        case({a[6:4],a[2]}) //CAS Latency
                                                                                4'b0000:$display("%m\tCL = Reserved");
                                                                                4'b0010:$display("%m\tCL = 5");
                                                                                4'b0100:$display("%m\tCL = 6");
                                                                                4'b0110:$display("%m\tCL = 7");
                                                                                4'b1000:$display("%m\tCL = 8");
                                                                                4'b1010:$display("%m\tCL = 9");
                                                                                4'b1100:$display("%m\tCL = 10");
                                                                                4'b1111:$display("%m\tCL = 11(Optional for DD3-1600)");
                                                                                4'b0001:$display("%m\tCL = 12");
                                                                                4'b0011:$display("%m\tCL = 13");
                                                                                4'b0101:$display("%m\tCL = 14");
                                                                                4'b0111:$display("%m\tCL = Reserved for 15");
                                                                                4'b1001:$display("%m\tCL = Reserved for 16");
                                                                                4'b1011:$display("%m\tCL = Reserved");
                                                                                4'b1101:$display("%m\tCL = Reserved");
                                                                                4'b1111:$display("%m\tCL = Reserved");
                                                                        endcase
 
                                                                        case(a[11:9]) //Write Recover
                                                                                3'b000:$display("%m\tWR = 16^2(256 cycles)");
                                                                                3'b001:$display("%m\tWR =  5^2( 25 cycles)");
                                                                                3'b010:$display("%m\tWR =  6^2( 36 cycles)");
                                                                                3'b011:$display("%m\tWR =  7^2( 49 cycles)");
                                                                                3'b100:$display("%m\tWR =  8^2( 64 cycles)");
                                                                                3'b101:$display("%m\tWR = 10^2(100 cycles)");
                                                                                3'b110:$display("%m\tWR = 12^2(144 cycles)");
                                                                                3'b111:$display("%m\tWR = 14^2(196 cycles)");
                                                                        endcase
                                                                end//end MR0
                                                                2'b01:begin //MR1
                                                                end//end MR1
                                                                2'b10:begin //MR2
                                                                end//end MR2
                                                                2'b11:begin //MR3
                                                                end//end MR3
                                                        endcase //end which MRS
 
 
                                                end //end MRS
        /*OPCODE_NOP            :begin
                                        /$display("%m: at time %t WRITE ",$time);
                                end
        */
        /*
        OPCODE_READ             :begin
                                        $display("%m: at time %t READ - BANK[%x]\tROW[%x]\tCOL[%x]",$time,ba,last_row,a);
                                end
        OPCODE_WRITE            :begin
                                        $display("%m: at time %t WRITE - BANK[%x]\tROW[%x],\tCOL[%x]",$time,ba,last_row,a);
                                end
        */
        OPCODE_ZQC              :begin
                                        $display("%m: at time %t ZQC ",$time);
                                end
        endcase
 
end // end always@(*)
/* end utility*/
 
endmodule

Line No.	Rev	Author	Line
1	2	slai	`/*`
2			`*DDR3 Simple Synthesizable Memory BFM`
3			`*2010-2011 sclai <laikos@yahoo.com>`
4			`*`
5			`*This library is free software; you can redistribute it and/or modify it`
6			`* under the terms of the GNU Lesser General Public License as published by`
7			`* the Free Software Foundation; either version 2.1 of the License,`
8			`* or (at your option) any later version.`
9			`*`
10			`* This library is distributed in the hope that it will be useful, but`
11			`* WITHOUT ANY WARRANTY; without even the implied warranty of`
12			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU`
13			`* Lesser General Public License for more details.`
14			`*`
15			`* You should have received a copy of the GNU Lesser General Public`
16			`* License along with this library; if not, write to the Free Software`
17			`* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307`
18			`* USA`
19			`*`
20			`*`
21	3	slai	`* Simple implementation of DDR3 Memory`
22	2	slai	`* will only reponse to write and read request`
23			`* parameter`
24			`* count start from t0,t2,t2...`
25			`* ck _\|-\|_\|-\|_\|-\|_\|-\|_`
26			`*`
27			`* cs#---\|___\|---------`
28			`*`
29			`* \| \| \|`
30			`* t0 t1 t2 ....`
31			`*`
32	4	slai	`*`
33	2	slai	`*/`
34
35			`timescale 1ps / 1ps
36
37			`module ddr3_simple4#(`
38			`parameter MEM_DQ_WIDTH =8,`
39			`parameter MEM_BA_WIDTH =3,`
40			`parameter MEM_ROW_WIDTH =13,`
41			`parameter MEM_COL_WIDTH =13,`
42	4	slai	`parameter MEM_AL =0,`
43			`parameter MEM_CWL =8, //CWL`
44			`parameter MEM_CL =6 //CL`
45	2	slai	`)(`
46			`input wire [MEM_ROW_WIDTH-1:0] a,`
47			`input wire [ MEM_BA_WIDTH-1:0] ba,`
48	4	slai	`input wire ck,`
49			`input wire ck_n,`
50			`input wire cke,`
51			`input wire cs_n,`
52			`input wire dm,`
53			`input wire ras_n,`
54			`input wire cas_n,`
55			`input wire we_n,`
56			`input wire reset_n,`
57			`inout wire [MEM_DQ_WIDTH-1:0] dq,`
58			`inout wire dqs,`
59			`inout wire dqs_n,`
60			`input wire odt`
61	2	slai	`);`
62
63	4	slai	`//convert actual CL and CWL parameter to`
64	2	slai
65			`//definitions`
66	4	slai	`localparam OPCODE_PRECHARGE = 4'b0010;`
67			`localparam OPCODE_ACTIVATE = 4'b0011;`
68			`localparam OPCODE_WRITE = 4'b0100;`
69			`localparam OPCODE_READ = 4'b0101;`
70			`localparam OPCODE_MRS = 4'b0000;`
71			`localparam OPCODE_REFRESH = 4'b0001;`
72			`localparam OPCODE_DES = 4'b1000;`
73			`localparam OPCODE_ZQC = 4'b0110;`
74			`localparam OPCODE_NOP = 4'b0111;`
75	2	slai
76			`//mode registers`
77			`reg [31:0] mr0;`
78			`reg [31:0] mr2;`
79			`reg [31:0] mr3;`
80
81
82			`wire [35:0] write_add;`
83			`wire [35:0] read_add;`
84			`wire [3:0] write_cmd;`
85			`wire [3:0] read_cmd;`
86			`(* keep )wire [(MEM_DQ_WIDTH2)-1:0] read_data;`
87
88			`reg [ 2:0] last_bank;`
89			`reg [15:0] last_row;`
90			`reg [3:0] last_write_cmd;`
91			`reg [3:0] last_read_cmd;`
92			`reg [35:0] last_write_add;`
93			`reg [35:0] last_read_add;`
94
95			`reg write_address12;`
96			`reg read_address12;`
97
98			`//bank tracker`
99			`reg [MEM_ROW_WIDTH-1:0]opened_row[(2**MEM_BA_WIDTH)-1:0];`
100			`//row tracker`
101
102			`wire [MEM_DQ_WIDTH-1:0] dq_out;`
103			`reg [MEM_DQ_WIDTH-1:0] dq_in0;`
104
105			`(* keep *) wire [MEM_DQ_WIDTH-1:0] data_hi;`
106			`(* keep *) wire [MEM_DQ_WIDTH-1:0] data_lo;`
107	4	slai	`(* keep *) wire data_hi_dm;`
108			`(* keep *) wire data_lo_dm;`
109	2	slai	`//IDDR`
110			`my_iddrx8 iddrx8_inst(`
111			`.clk(ck),`
112			`.io(dq),`
113			`.d0(data_lo),`
114			`.d1(data_hi)`
115			`);`
116
117			`my_iddrx8 iddrx8_dm_inst(`
118			`.clk(ck),`
119			`.io(dm),`
120			`.d0(data_lo_dm),`
121			`.d1(data_hi_dm)`
122			`);`
123
124			`//ODDR`
125			`my_oddrx8 oddrx8_inst(`
126			`.clk(ck),`
127			`.d0(read_data[ MEM_DQ_WIDTH-1:0 ]),`
128			`.d1(read_data[(MEM_DQ_WIDTH*2)-1:MEM_DQ_WIDTH]),`
129			`.io(dq_out)`
130			`);`
131
132			`//double data rate`
133			`always @(posedge ck )`
134			`begin`
135			`if(reset_n==1'b0)`
136			`begin`
137			`last_bank <=4'h0;`
138			`last_row <=16'h0000;`
139			`end`
140			`else`
141			`begin`
142			`case({cs_n,ras_n,cas_n,we_n})`
143			`/*`
144			`OPCODE_PRECHARGE :begin`
145	4	slai	`$display("t=%d,PRECHARGE",vip_clk);`
146			`end`
147	2	slai	`*/`
148			`OPCODE_ACTIVATE :begin`
149	4	slai	`opened_row [ba] <={{(16-MEM_ROW_WIDTH){1'b0}},a[MEM_ROW_WIDTH-1:0]};`
150			`end`
151	2	slai	`/*`
152	4	slai	`OPCODE_DES :begin`
153			`$display("t=%d,DES",vip_clk);`
154			`end`
155	2	slai	`OPCODE_MRS :begin`
156	4	slai	`$display("t=%d,MRS",vip_clk);`
157			`end`
158	2	slai	`OPCODE_NOP :begin`
159	4	slai	`//$display("t=%d,NOP",vip_clk);`
160			`end`
161	2	slai	`*/`
162			`OPCODE_READ :begin`
163	4	slai	`last_read_add <={ba,opened_row[ba],{{(16-MEM_COL_WIDTH){1'b0}},a[MEM_COL_WIDTH-1:0]}};`
164			`last_read_cmd <=OPCODE_READ;`
165			`end`
166	2	slai	`OPCODE_WRITE :begin`
167	4	slai	`last_write_add <={ba,opened_row[ba],{{(16-MEM_COL_WIDTH){1'b0}},a[MEM_COL_WIDTH-1:0]}};`
168			`last_write_cmd <=OPCODE_WRITE;`
169			`end`
170	2	slai	`/*`
171	4	slai	`OPCODE_ZQC :begin`
172			`$display("t=%d,ZQC",vip_clk);`
173			`end*/`
174	2	slai	`default:begin`
175			`last_read_cmd <=OPCODE_NOP;`
176			`last_write_cmd <=OPCODE_NOP;`
177	4	slai	`end`
178	2	slai	`endcase`
179			`end // end reset`
180			`end // end always@(*)`
181
182
183
184			`//cmd`
185			`//read`
186			`ddr3_sr4 #(`
187	4	slai	`.PIPE_LEN(MEM_CL)`
188	2	slai	`)ddr3_read_cmd_sr(`
189			`.clk(ck),`
190			`.shift_in(last_read_cmd),`
191			`.shift_out(read_cmd)`
192			`);`
193			`//bank, row, col`
194			`ddr3_sr36 #(`
195	4	slai	`.PIPE_LEN(MEM_CL+1)`
196	2	slai	`)ddr3_read_add_sr(`
197			`.clk(ck),`
198			`.shift_in(last_read_add),`
199			`.shift_out(read_add)`
200			`);`
201
202			`//cmd`
203			`//write`
204			`ddr3_sr4#(`
205	4	slai	`.PIPE_LEN(MEM_CWL)`
206	2	slai	`)ddr3_write_cmd_sr(`
207			`.clk(ck),`
208			`.shift_in(last_write_cmd),`
209			`.shift_out(write_cmd)`
210			`);`
211
212			`//bank, row, col`
213			`ddr3_sr36#(`
214	4	slai	`.PIPE_LEN(MEM_CWL+1) //have to be a cycle late to wait for IDDR latency`
215	2	slai	`) ddr3_write_add_sr(`
216			`.clk(ck),`
217			`.shift_in(last_write_add),`
218			`.shift_out(write_add)`
219			`);`
220
221
222			`//write fsm`
223			`localparam WR_D0 =4'd0;`
224			`localparam WR_D1 =4'd1;`
225			`localparam WR_D2 =4'd2;`
226	4	slai	`localparam WR_D3 =4'd3;`
227			`localparam WR_IDLE =4'd5;`
228	2	slai	`reg [3:0] write_state;`
229			`reg mem_we;`
230			`reg [2:0] write_col;`
231			`always@(posedge ck)`
232			`begin`
233			`if(reset_n==1'b0)`
234			`begin`
235			`write_state<=WR_IDLE;`
236			`mem_we<=1'b0;`
237			`write_col<=0;`
238			`end`
239			`else`
240			`begin`
241			`case(write_state)`
242			`WR_IDLE:begin`
243			`write_col<=0;`
244			`if(write_cmd==OPCODE_WRITE)`
245			`begin`
246			`write_state<=WR_D0;`
247			`mem_we<=1'b1;`
248			`end`
249			`else`
250			`begin`
251			`write_state<=WR_IDLE;`
252			`mem_we<=1'b0;`
253			`end`
254			`end`
255			`WR_D0:begin`
256			`write_address12<=write_add[12];`
257			`write_state<=WR_D1;`
258			`write_col<=write_col+1'b1;`
259			`$display("%m: at time %t\tWRITE BANK[%x]\tROW[%x]\tCOL[%x]\tWR D0: %x-%x",$time,write_add[34:32],write_add[31:16],write_add[15:0],data_hi,data_lo);`
260			`end`
261			`WR_D1:begin`
262			`if(write_address12==1'b1)`
263			`begin`
264			`write_state<=WR_D2;`
265			`write_col<=write_col+1'b1;`
266			`end`
267			`else if (write_cmd==OPCODE_WRITE)`
268			`begin`
269			`write_state<=WR_D0;`
270			`write_col<=0;`
271			`end`
272			`else`
273			`begin`
274			`write_state<=WR_IDLE;`
275			`mem_we<=1'b0;`
276			`end`
277			`$display("%m: at time %t\tWRITE BANK[%x]\tROW[%x]\tCOL[%x]\tWR D1: %x-%x",$time,write_add[34:32],write_add[31:16],write_add[15:0],data_hi,data_lo);`
278			`end`
279			`WR_D2:begin`
280			`write_state<=WR_D3;`
281			`write_col<=write_col+1'b1;`
282			`$display("%m: at time %t\tWRITE BANK[%x]\tROW[%x]\tCOL[%x]\tWR D2: %x-%x",$time,write_add[34:32],write_add[31:16],write_add[15:0],data_hi,data_lo);`
283			`end`
284			`WR_D3:begin`
285			`$display("%m: at time %t\tWRITE BANK[%x]\tROW[%x]\tCOL[%x]\tWR D3: %x-%x",$time,write_add[34:32],write_add[31:16],write_add[15:0],data_hi,data_lo);`
286
287			`//write_col<=write_col+1'b1;`
288			`if (write_cmd==OPCODE_WRITE)`
289			`begin`
290			`write_state<=WR_D0;`
291			`write_col<=0;`
292			`end`
293			`else`
294			`begin`
295			`write_state<=WR_IDLE;`
296			`mem_we<=1'b0;`
297			`end`
298			`end`
299			`endcase`
300			`end //endif`
301			`end`
302
303
304			`//read fsm`
305			`localparam RD_D0 =4'd0;`
306			`localparam RD_D1 =4'd1;`
307			`localparam RD_D2 =4'd2;`
308	4	slai	`localparam RD_D3 =4'd3;`
309			`localparam RD_IDLE =4'd5;`
310	2	slai
311			`reg [3:0] read_state;`
312			`reg [2:0] read_col;`
313			`reg send_dq;`
314			`reg send_dqs0;`
315			`reg send_dqs1;`
316
317			`always@(posedge ck)`
318			`begin`
319			`if(reset_n==1'b0)`
320			`begin`
321			`read_state<=RD_IDLE;`
322			`read_col <=0;`
323			`send_dq <=0;`
324			`end`
325			`else`
326			`begin`
327			`case(read_state)`
328			`RD_IDLE:begin`
329			`read_col<=0;`
330			`send_dq<=0;`
331			`if(read_cmd==OPCODE_READ)`
332			`begin`
333			`read_state<=RD_D0;`
334			`end`
335			`else`
336			`begin`
337			`read_state<=RD_IDLE;`
338			`end`
339			`end`
340			`RD_D0:begin`
341			`read_address12<=read_add[12];`
342			`read_state<=RD_D1;`
343			`read_col<=read_col+1'b1;`
344			`send_dq <=1'b1;`
345			`$display("%m: at time %t\tREAD BANK[%x]\tROW[%x]\tCOL[%x]\tRD D0",$time,read_add[34:32],read_add[31:16],read_add[15:0]);`
346			`end`
347			`RD_D1:begin`
348			`if(read_address12==1'b1)`
349			`begin`
350			`read_state<=RD_D2;`
351			`read_col<=read_col+1'b1;`
352			`end`
353			`else if (read_cmd==OPCODE_READ)`
354			`begin`
355			`read_state<=RD_D0;`
356			`read_col<=0;`
357			`send_dq <=1'b1;`
358			`end`
359			`else`
360			`begin`
361			`read_state<=RD_IDLE;`
362			`//send_dq <=1'b0;`
363			`end`
364			`$display("%m: at time %t\tREAD BANK[%x]\tROW[%x]\tCOL[%x]\tRD D1",$time,read_add[34:32],read_add[31:16],read_add[15:0]);`
365			`end`
366			`RD_D2:begin`
367			`read_state<=RD_D3;`
368			`read_col<=read_col+1'b1;`
369			`send_dq <=1'b1;`
370			`$display("%m: at time %t\tREAD BANK[%x]\tROW[%x]\tCOL[%x]\tRD D2",$time,read_add[34:32],read_add[31:16],read_add[15:0]);`
371			`end`
372			`RD_D3:begin`
373			`//write_col<=write_col+1'b1;`
374			`if (read_cmd==OPCODE_READ)`
375			`begin`
376			`read_state<=RD_D0;`
377			`read_col<=0;`
378			`send_dq <=1'b1;`
379			`end`
380			`else`
381			`begin`
382			`read_state<=RD_IDLE;`
383			`read_col<=0;`
384			`//send_dq <=1'b0;`
385			`end`
386			`$display("%m: at time %t\tREAD BANK[%x]\tROW[%x]\tCOL[%x]\tRD D3",$time,read_add[34:32],read_add[31:16],read_add[15:0]);`
387			`end`
388			`endcase`
389			`end`
390
391			`end //end always`
392
393			`//dqs fsm`
394			`always @(posedge ck_n)`
395			`begin`
396			`if(reset_n==1'b0)`
397			`begin`
398			`send_dqs1<=0;`
399			`send_dqs0<=0;`
400			`end`
401			`else`
402			`begin`
403			`if(read_cmd==OPCODE_READ)`
404			`begin`
405			`send_dqs1<=1'b1;`
406			`end`
407			`else`
408			`begin`
409			`send_dqs1<=1'b0;`
410			`end`
411			`end`
412			`send_dqs0<=send_dqs1;`
413			`end//end always`
414
415			`//ram here`
416			`dport_ram #(`
417	4	slai	`.DATA_WIDTH(MEM_DQ_WIDTH), //data_hi,data_lo`
418	2	slai	`.ADDR_WIDTH(36)`
419			`)dport_ram_hi(`
420			`.clk (ck),`
421			`.di (data_hi),`
422			`.read_addr (read_add+read_col),`
423			`.write_addr (write_add+write_col),`
424			`.we (mem_we & data_hi_dm),`
425			`.do (read_data[15:8])`
426			`);`
427
428			`dport_ram #(`
429	4	slai	`.DATA_WIDTH(MEM_DQ_WIDTH), //data_hi,data_lo`
430	2	slai	`.ADDR_WIDTH(36)`
431			`)dport_ram_lo(`
432			`.clk (ck),`
433			`.di (data_lo),`
434			`.read_addr (read_add+read_col),`
435			`.write_addr (write_add+write_col),`
436			`.we (mem_we & data_lo_dm),`
437			`.do (read_data[7:0])`
438			`);`
439			`assign dqs =((send_dqs0==1'b1) \|\| (send_dq==1'b1))?ck:1'bz;`
440			`assign dqs_n=((send_dqs0==1'b1) \|\| (send_dq==1'b1))?ck_n:1'bz;`
441			`assign dq = (send_dq==1'b1)?dq_out:8'hZZ;`
442
443			`/* utility functions to display information`
444			`*/`
445	4	slai
446	2	slai	`initial begin`
447			`$timeformat (-9, 1, " ns", 1);`
448			`end`
449
450			`always @(posedge ck )`
451			`begin`
452			`case({cs_n,ras_n,cas_n,we_n})`
453
454			`OPCODE_PRECHARGE :begin`
455	4	slai	`$display("%m: at time %t PRECHARGE ",$time);`
456			`end`
457	2	slai
458			`OPCODE_ACTIVATE :begin`
459	4	slai	`$display("%m: at time %t ACTIVATE - BANK[%x]\tROW[%x]",$time,ba,a);`
460			`end`
461	2	slai
462	4	slai	`OPCODE_DES :begin`
463			`$display("%m: at time %t DES ",$time);`
464			`end`
465			`OPCODE_MRS :begin`
466			`$display("%m: at time %t MRS - MR[%d]",$time,ba[1:0]);`
467			`case(ba[1:0])`
468			`2'b00:begin //MR0`
469			`case(a[1:0]) // burst length`
470			`2'b00:$display("%m\tBL = BL8 \(Fixed\)");`
471			`2'b01:$display("%m\tBL = BC4/BL8 OTF");`
472			`2'b10:$display("%m\tBL = BC4 (Fixed)");`
473			`2'b11:$display("%m\tBL = Reserved");`
474			`endcase`
475
476			`case({a[6:4],a[2]}) //CAS Latency`
477			`4'b0000:$display("%m\tCL = Reserved");`
478			`4'b0010:$display("%m\tCL = 5");`
479			`4'b0100:$display("%m\tCL = 6");`
480			`4'b0110:$display("%m\tCL = 7");`
481			`4'b1000:$display("%m\tCL = 8");`
482			`4'b1010:$display("%m\tCL = 9");`
483			`4'b1100:$display("%m\tCL = 10");`
484			`4'b1111:$display("%m\tCL = 11(Optional for DD3-1600)");`
485			`4'b0001:$display("%m\tCL = 12");`
486			`4'b0011:$display("%m\tCL = 13");`
487			`4'b0101:$display("%m\tCL = 14");`
488			`4'b0111:$display("%m\tCL = Reserved for 15");`
489			`4'b1001:$display("%m\tCL = Reserved for 16");`
490			`4'b1011:$display("%m\tCL = Reserved");`
491			`4'b1101:$display("%m\tCL = Reserved");`
492			`4'b1111:$display("%m\tCL = Reserved");`
493			`endcase`
494
495			`case(a[11:9]) //Write Recover`
496			`3'b000:$display("%m\tWR = 16^2(256 cycles)");`
497			`3'b001:$display("%m\tWR = 5^2( 25 cycles)");`
498			`3'b010:$display("%m\tWR = 6^2( 36 cycles)");`
499			`3'b011:$display("%m\tWR = 7^2( 49 cycles)");`
500			`3'b100:$display("%m\tWR = 8^2( 64 cycles)");`

Browse

Tools

Subversion Repositories ddr3_synthesizable_bfm

[/] [ddr3_synthesizable_bfm/] [trunk/] [rtl/] [ddr3_simple4.v] - Blame information for rev 5