Subversion Repositories ethmac

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  eth_registers.v                                             ////

////                                                              ////

////  This file is part of the Ethernet IP core project           ////

////  http://www.opencores.org/cores/ethmac/                      ////

////                                                              ////

////  Author(s):                                                  ////

////      - Igor Mohor (igorM@opencores.org)                      ////

////                                                              ////

////  All additional information is avaliable in the Readme.txt   ////

////  file.                                                       ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2001 Authors                                   ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.4  2001/10/19 08:43:51  mohor

// eth_timescale.v changed to timescale.v This is done because of the

// simulation of the few cores in a one joined project.

//

// Revision 1.3  2001/10/18 12:07:11  mohor

// Status signals changed, Adress decoding changed, interrupt controller

// added.

//

// Revision 1.2  2001/09/24 15:02:56  mohor

// Defines changed (All precede with ETH_). Small changes because some

// tools generate warnings when two operands are together. Synchronization

// between two clocks domains in eth_wishbonedma.v is changed (due to ASIC

// demands).

//

// Revision 1.1  2001/08/06 14:44:29  mohor

// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).

// Include files fixed to contain no path.

// File names and module names changed ta have a eth_ prologue in the name.

// File eth_timescale.v is used to define timescale

// All pin names on the top module are changed to contain _I, _O or _OE at the end.

// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O

// and Mdo_OE. The bidirectional signal must be created on the top level. This

// is done due to the ASIC tools.

//

// Revision 1.2  2001/08/02 09:25:31  mohor

// Unconnected signals are now connected.

//

// Revision 1.1  2001/07/30 21:23:42  mohor

// Directory structure changed. Files checked and joind together.

//

//

//

//

//

//

`include "eth_defines.v"

`include "timescale.v"

module eth_registers( DataIn, Address, Rw, Cs, Clk, Reset, DataOut, r_DmaEn,

                      r_RecSmall, r_Pad, r_HugEn, r_CrcEn, r_DlyCrcEn,

                      r_Rst, r_FullD, r_ExDfrEn, r_NoBckof, r_LoopBck, r_IFG,

                      r_Pro, r_Iam, r_Bro, r_NoPre, r_TxEn, r_RxEn,

                      TxB_IRQ, TxE_IRQ, RxB_IRQ, RxF_IRQ, Busy_IRQ,

                      r_IPGT, r_IPGR1, r_IPGR2, r_MinFL, r_MaxFL, r_MaxRet,

                      r_CollValid, r_TxFlow, r_RxFlow, r_PassAll,

                      r_MiiMRst, r_MiiNoPre, r_ClkDiv, r_WCtrlData, r_RStat, r_ScanStat,

                      r_RGAD, r_FIAD, r_CtrlData, NValid_stat, Busy_stat,

                      LinkFail, r_MAC, WCtrlDataStart, RStatStart,

                      UpdateMIIRX_DATAReg, Prsd, r_RxBDNum, RX_BD_NUM_Wr, int_o

                    );

parameter Tp = 1;

input [31:0] DataIn;

input [5:0] Address;

input Rw;

input Cs;

input Clk;

input Reset;

input WCtrlDataStart;

input RStatStart;

input UpdateMIIRX_DATAReg;

input [15:0] Prsd;

output [31:0] DataOut;

reg    [31:0] DataOut;

output r_DmaEn;

output r_RecSmall;

output r_Pad;

output r_HugEn;

output r_CrcEn;

output r_DlyCrcEn;

output r_Rst;

output r_FullD;

output r_ExDfrEn;

output r_NoBckof;

output r_LoopBck;

output r_IFG;

output r_Pro;

output r_Iam;

output r_Bro;

output r_NoPre;

output r_TxEn;

output r_RxEn;

input TxB_IRQ;

input TxE_IRQ;

input RxB_IRQ;

input RxF_IRQ;

input Busy_IRQ;

output [6:0] r_IPGT;

output [6:0] r_IPGR1;

output [6:0] r_IPGR2;

output [15:0] r_MinFL;

output [15:0] r_MaxFL;

output [3:0] r_MaxRet;

output [5:0] r_CollValid;

output r_TxFlow;

output r_RxFlow;

output r_PassAll;

output r_MiiMRst;

output r_MiiNoPre;

output [7:0] r_ClkDiv;

output r_WCtrlData;

output r_RStat;

output r_ScanStat;

output [4:0] r_RGAD;

output [4:0] r_FIAD;

output [15:0]r_CtrlData;

input NValid_stat;

input Busy_stat;

input LinkFail;

output [47:0]r_MAC;

output [7:0] r_RxBDNum;

output       RX_BD_NUM_Wr;

output       int_o;

reg          irq_txb;

reg          irq_txe;

reg          irq_rxb;

reg          irq_rxf;

reg          irq_busy;

wire Write = Cs &  Rw;

wire Read  = Cs & ~Rw;

wire MODER_Wr       = (Address == `ETH_MODER_ADR       )  & Write;

wire INT_SOURCE_Wr  = (Address == `ETH_INT_SOURCE_ADR  )  & Write;

wire INT_MASK_Wr    = (Address == `ETH_INT_MASK_ADR    )  & Write;

wire IPGT_Wr        = (Address == `ETH_IPGT_ADR        )  & Write;

wire IPGR1_Wr       = (Address == `ETH_IPGR1_ADR       )  & Write;

wire IPGR2_Wr       = (Address == `ETH_IPGR2_ADR       )  & Write;

wire PACKETLEN_Wr   = (Address == `ETH_PACKETLEN_ADR   )  & Write;

wire COLLCONF_Wr    = (Address == `ETH_COLLCONF_ADR    )  & Write;

wire CTRLMODER_Wr   = (Address == `ETH_CTRLMODER_ADR   )  & Write;

wire MIIMODER_Wr    = (Address == `ETH_MIIMODER_ADR    )  & Write;

wire MIICOMMAND_Wr  = (Address == `ETH_MIICOMMAND_ADR  )  & Write;

wire MIIADDRESS_Wr  = (Address == `ETH_MIIADDRESS_ADR  )  & Write;

wire MIITX_DATA_Wr  = (Address == `ETH_MIITX_DATA_ADR  )  & Write;

wire MIIRX_DATA_Wr  = UpdateMIIRX_DATAReg;

wire MIISTATUS_Wr   = (Address == `ETH_MIISTATUS_ADR   )  & Write;

wire MAC_ADDR0_Wr   = (Address == `ETH_MAC_ADDR0_ADR   )  & Write;

wire MAC_ADDR1_Wr   = (Address == `ETH_MAC_ADDR1_ADR   )  & Write;

assign RX_BD_NUM_Wr = (Address == `ETH_RX_BD_NUM_ADR   )  & Write;

wire [31:0] MODEROut;

wire [31:0] INT_SOURCEOut;

wire [31:0] INT_MASKOut;

wire [31:0] IPGTOut;

wire [31:0] IPGR1Out;

wire [31:0] IPGR2Out;

wire [31:0] PACKETLENOut;

wire [31:0] COLLCONFOut;

wire [31:0] CTRLMODEROut;

wire [31:0] MIIMODEROut;

wire [31:0] MIICOMMANDOut;

wire [31:0] MIIADDRESSOut;

wire [31:0] MIITX_DATAOut;

wire [31:0] MIIRX_DATAOut;

wire [31:0] MIISTATUSOut;

wire [31:0] MAC_ADDR0Out;

wire [31:0] MAC_ADDR1Out;

wire [31:0] RX_BD_NUMOut;

eth_register #(32) MODER       (.DataIn(DataIn), .DataOut(MODEROut),      .Write(MODER_Wr),      .Clk(Clk), .Reset(Reset), .Default(`ETH_MODER_DEF));

eth_register #(32) INT_MASK    (.DataIn(DataIn), .DataOut(INT_MASKOut),   .Write(INT_MASK_Wr),   .Clk(Clk), .Reset(Reset), .Default(`ETH_INT_MASK_DEF));

eth_register #(32) IPGT        (.DataIn(DataIn), .DataOut(IPGTOut),       .Write(IPGT_Wr),       .Clk(Clk), .Reset(Reset), .Default(`ETH_IPGT_DEF));

eth_register #(32) IPGR1       (.DataIn(DataIn), .DataOut(IPGR1Out),      .Write(IPGR1_Wr),      .Clk(Clk), .Reset(Reset), .Default(`ETH_IPGR1_DEF));

eth_register #(32) IPGR2       (.DataIn(DataIn), .DataOut(IPGR2Out),      .Write(IPGR2_Wr),      .Clk(Clk), .Reset(Reset), .Default(`ETH_IPGR2_DEF));

eth_register #(32) PACKETLEN   (.DataIn(DataIn), .DataOut(PACKETLENOut),  .Write(PACKETLEN_Wr),  .Clk(Clk), .Reset(Reset), .Default(`ETH_PACKETLEN_DEF));

eth_register #(32) COLLCONF    (.DataIn(DataIn), .DataOut(COLLCONFOut),   .Write(COLLCONF_Wr),   .Clk(Clk), .Reset(Reset), .Default(`ETH_COLLCONF_DEF));

// CTRLMODER registers

wire [31:0] DefaultCtrlModer = `ETH_CTRLMODER_DEF;

assign CTRLMODEROut[31:3] = 29'h0;

eth_register #(3)  CTRLMODER2  (.DataIn(DataIn[2:0]),   .DataOut(CTRLMODEROut[2:0]),   .Write(CTRLMODER_Wr),  .Clk(Clk), .Reset(Reset), .Default(DefaultCtrlModer[2:0]));

// End: CTRLMODER registers

eth_register #(32) MIIMODER    (.DataIn(DataIn), .DataOut(MIIMODEROut),   .Write(MIIMODER_Wr),   .Clk(Clk), .Reset(Reset), .Default(`ETH_MIIMODER_DEF));

assign MIICOMMANDOut[31:3] = 29'h0;

eth_register #(1) MIICOMMAND2  (.DataIn(DataIn[2]), .DataOut(MIICOMMANDOut[2]), .Write(MIICOMMAND_Wr), .Clk(Clk), .Reset(Reset | WCtrlDataStart), .Default(1'b0));

eth_register #(1) MIICOMMAND1  (.DataIn(DataIn[1]), .DataOut(MIICOMMANDOut[1]), .Write(MIICOMMAND_Wr), .Clk(Clk), .Reset(Reset | RStatStart), .Default(1'b0));

eth_register #(1) MIICOMMAND0  (.DataIn(DataIn[0]), .DataOut(MIICOMMANDOut[0]), .Write(MIICOMMAND_Wr), .Clk(Clk), .Reset(Reset), .Default(1'b0));

eth_register #(32) MIIADDRESS  (.DataIn(DataIn), .DataOut(MIIADDRESSOut), .Write(MIIADDRESS_Wr), .Clk(Clk), .Reset(Reset), .Default(`ETH_MIIADDRESS_DEF));

eth_register #(32) MIITX_DATA  (.DataIn(DataIn), .DataOut(MIITX_DATAOut), .Write(MIITX_DATA_Wr), .Clk(Clk), .Reset(Reset), .Default(`ETH_MIITX_DATA_DEF));

eth_register #(32) MIIRX_DATA  (.DataIn({16'h0, Prsd}),   .DataOut(MIIRX_DATAOut), .Write(MIIRX_DATA_Wr), .Clk(Clk), .Reset(Reset), .Default(`ETH_MIIRX_DATA_DEF));

//eth_register #(32) MIISTATUS   (.DataIn(DataIn), .DataOut(MIISTATUSOut),  .Write(MIISTATUS_Wr),  .Clk(Clk), .Reset(Reset), .Default(`ETH_MIISTATUS_DEF));

eth_register #(32) MAC_ADDR0   (.DataIn(DataIn), .DataOut(MAC_ADDR0Out),  .Write(MAC_ADDR0_Wr),  .Clk(Clk), .Reset(Reset), .Default(`ETH_MAC_ADDR0_DEF));

eth_register #(32) MAC_ADDR1   (.DataIn(DataIn), .DataOut(MAC_ADDR1Out),  .Write(MAC_ADDR1_Wr),  .Clk(Clk), .Reset(Reset), .Default(`ETH_MAC_ADDR1_DEF));

assign RX_BD_NUMOut[31:8] = 24'h0;

eth_register #(8) RX_BD_NUM   (.DataIn(DataIn[7:0]), .DataOut(RX_BD_NUMOut[7:0]), .Write(RX_BD_NUM_Wr),  .Clk(Clk), .Reset(Reset), .Default(`ETH_RX_BD_NUM_DEF));

reg LinkFailRegister;

wire ResetLinkFailRegister = Address == `ETH_MIISTATUS_ADR & Read;

reg ResetLinkFailRegister_q1;

reg ResetLinkFailRegister_q2;

always @ (posedge Clk or posedge Reset)

begin

  if(Reset)

    begin

      LinkFailRegister <= #Tp 0;

      ResetLinkFailRegister_q1 <= #Tp 0;

      ResetLinkFailRegister_q2 <= #Tp 0;

    end

  else

    begin

      ResetLinkFailRegister_q1 <= #Tp ResetLinkFailRegister;

      ResetLinkFailRegister_q2 <= #Tp ResetLinkFailRegister_q1;

      if(LinkFail)

        LinkFailRegister <= #Tp 1;

      if(~ResetLinkFailRegister_q1 & ResetLinkFailRegister_q2)

        LinkFailRegister <= #Tp 0;

    end

end

always @ (Address or Read or MODEROut or INT_SOURCEOut or INT_MASKOut or IPGTOut or

          IPGR1Out or IPGR2Out or PACKETLENOut or COLLCONFOut or CTRLMODEROut or

          MIIMODEROut or MIICOMMANDOut or MIIADDRESSOut or MIITX_DATAOut or

          MIIRX_DATAOut or MIISTATUSOut or MAC_ADDR0Out or MAC_ADDR1Out or

          RX_BD_NUMOut)

begin

  if(Read)  // read

    begin

      case(Address)

        `ETH_MODER_ADR        :  DataOut<=MODEROut;

        `ETH_INT_SOURCE_ADR   :  DataOut<=INT_SOURCEOut;

        `ETH_INT_MASK_ADR     :  DataOut<=INT_MASKOut;

        `ETH_IPGT_ADR         :  DataOut<=IPGTOut;

        `ETH_IPGR1_ADR        :  DataOut<=IPGR1Out;

        `ETH_IPGR2_ADR        :  DataOut<=IPGR2Out;

        `ETH_PACKETLEN_ADR    :  DataOut<=PACKETLENOut;

        `ETH_COLLCONF_ADR     :  DataOut<=COLLCONFOut;

        `ETH_CTRLMODER_ADR    :  DataOut<=CTRLMODEROut;

        `ETH_MIIMODER_ADR     :  DataOut<=MIIMODEROut;

        `ETH_MIICOMMAND_ADR   :  DataOut<=MIICOMMANDOut;

        `ETH_MIIADDRESS_ADR   :  DataOut<=MIIADDRESSOut;

        `ETH_MIITX_DATA_ADR   :  DataOut<=MIITX_DATAOut;

        `ETH_MIIRX_DATA_ADR   :  DataOut<=MIIRX_DATAOut;

        `ETH_MIISTATUS_ADR    :  DataOut<=MIISTATUSOut;

        `ETH_MAC_ADDR0_ADR    :  DataOut<=MAC_ADDR0Out;

        `ETH_MAC_ADDR1_ADR    :  DataOut<=MAC_ADDR1Out;

        `ETH_RX_BD_NUM_ADR    :  DataOut<=RX_BD_NUMOut;

        default:             DataOut<=32'h0;

      endcase

    end

  else

    DataOut<=32'h0;

end

assign r_DmaEn            = MODEROut[17];

assign r_RecSmall         = MODEROut[16];

assign r_Pad              = MODEROut[15];

assign r_HugEn            = MODEROut[14];

assign r_CrcEn            = MODEROut[13];

assign r_DlyCrcEn         = MODEROut[12];

assign r_Rst              = MODEROut[11];

assign r_FullD            = MODEROut[10];

assign r_ExDfrEn          = MODEROut[9];

assign r_NoBckof          = MODEROut[8];

assign r_LoopBck          = MODEROut[7];

assign r_IFG              = MODEROut[6];

assign r_Pro              = MODEROut[5];

assign r_Iam              = MODEROut[4];

assign r_Bro              = MODEROut[3];

assign r_NoPre            = MODEROut[2];

assign r_TxEn             = MODEROut[1];

assign r_RxEn             = MODEROut[0];

assign r_IPGT[6:0]        = IPGTOut[6:0];

assign r_IPGR1[6:0]       = IPGR1Out[6:0];

assign r_IPGR2[6:0]       = IPGR2Out[6:0];

assign r_MinFL[15:0]      = PACKETLENOut[31:16];

assign r_MaxFL[15:0]      = PACKETLENOut[15:0];

assign r_MaxRet[3:0]     = COLLCONFOut[19:16];

assign r_CollValid[5:0]  = COLLCONFOut[5:0];

assign r_TxFlow           = CTRLMODEROut[2];

assign r_RxFlow           = CTRLMODEROut[1];

assign r_PassAll          = CTRLMODEROut[0];

assign r_MiiMRst          = MIIMODEROut[10];

assign r_MiiNoPre         = MIIMODEROut[8];

assign r_ClkDiv[7:0]      = MIIMODEROut[7:0];

assign r_WCtrlData        = MIICOMMANDOut[2];

assign r_RStat            = MIICOMMANDOut[1];

assign r_ScanStat         = MIICOMMANDOut[0];

assign r_RGAD[4:0]        = MIIADDRESSOut[12:8];

assign r_FIAD[4:0]        = MIIADDRESSOut[4:0];

assign r_CtrlData[15:0]   = MIITX_DATAOut[15:0];

assign MIISTATUSOut[31:10] = 22'h0           ;

assign MIISTATUSOut[9]  = NValid_stat        ;

assign MIISTATUSOut[8]  = Busy_stat          ;

assign MIISTATUSOut[7:3]= 5'h0               ;

assign MIISTATUSOut[2]  = 1'b0;

assign MIISTATUSOut[1]  = 1'b0;

assign MIISTATUSOut[0]  = LinkFailRegister   ;

assign r_MAC[31:0]        = MAC_ADDR0Out[31:0];

assign r_MAC[47:32]       = MAC_ADDR1Out[15:0];

assign r_RxBDNum[7:0] = RX_BD_NUMOut[7:0];

// Interrupt generation

always @ (posedge Clk or posedge Reset)

begin

  if(Reset)

    irq_txb <= 1'b0;

  else

  if(TxB_IRQ & INT_MASKOut[0])

    irq_txb <= #Tp 1'b1;

  else

  if(INT_SOURCE_Wr & DataIn[0])

    irq_txb <= #Tp 1'b0;

end

always @ (posedge Clk or posedge Reset)

begin

  if(Reset)

    irq_txe <= 1'b0;

  else

  if(TxE_IRQ & INT_MASKOut[1])

    irq_txe <= #Tp 1'b1;

  else

  if(INT_SOURCE_Wr & DataIn[1])

    irq_txe <= #Tp 1'b0;

end

always @ (posedge Clk or posedge Reset)

begin

  if(Reset)

    irq_rxb <= 1'b0;

  else

  if(RxB_IRQ & INT_MASKOut[2])

    irq_rxb <= #Tp 1'b1;

  else

  if(INT_SOURCE_Wr & DataIn[2])

    irq_rxb <= #Tp 1'b0;

end

always @ (posedge Clk or posedge Reset)

begin

  if(Reset)

    irq_rxf <= 1'b0;

  else

  if(RxF_IRQ & INT_MASKOut[3])

    irq_rxf <= #Tp 1'b1;

  else

  if(INT_SOURCE_Wr & DataIn[3])

    irq_rxf <= #Tp 1'b0;

end

always @ (posedge Clk or posedge Reset)

begin

  if(Reset)

    irq_busy <= 1'b0;

  else

  if(Busy_IRQ & INT_MASKOut[4])

    irq_busy <= #Tp 1'b1;

  else

  if(INT_SOURCE_Wr & DataIn[4])

    irq_busy <= #Tp 1'b0;

end

// Generating interrupt signal

assign int_o = irq_txb | irq_txe | irq_rxb | irq_rxf | irq_busy;

// For reading interrupt status

assign INT_SOURCEOut = {28'h0, irq_busy, irq_rxf, irq_rxb, irq_txe, irq_txb};

endmodule