OpenCores
URL https://opencores.org/ocsvn/forwardcom/forwardcom/trunk

Subversion Repositories forwardcom

[/] [forwardcom/] [manual/] [fwc_instruction_lists.tex] - Blame information for rev 157

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 146 Agner
% chapter included in forwardcom.tex
2
\documentclass[forwardcom.tex]{subfiles}
3
\begin{document}
4
\RaggedRight
5
 
6
\chapter{Instruction lists}\label{chap:InstructionLists}
7
The ForwardCom instructions are listed in a comma-separated file instruction\_list.csv. This file is intended for use by assemblers, disassemblers, debuggers and emulators. The list is preliminary and subject to possible changes. Please remember to keep the lists in this document and the list in the instruction\_list.cvs file synchronized.
8
\vv
9
 
10
The instruction list file has the following fields:
11
 
12
\begin{longtable} {|p{18mm}|p{100mm}|}
13
\caption{Fields in instruction list file}
14
\label{table:fieldsInInstructionListFile}
15
\\
16
\endfirsthead
17
\endhead
18
\hline
19
\bfseries Field & \bfseries Meaning  \\
20
\hline
21
Name & Name of instruction as used by assembler.  \\
22
\hline
23
Category & 1: single format instruction, \newline
24
           2: unused,  \newline
25
           3: multi-format instruction,  \newline
26
           4: jump instruction. \\
27
\hline
28
Formats & See table \ref{table:MeaningOfFormatsFieldInInstructionListFile} below.  \\
29
\hline
30
Template & Hexadecimal number:  \newline
31
           0xA - 0xE for template A - E,  \newline
32
           0x0 for multiple templates. \\
33
\hline
34
Variant &
35
D0:  No destination operand, no operand type.\newline
36
D1:  No destination operand, but operand type specified.\newline
37
D2:  Operand type ignored.\newline
38
D3:  Destination register used for other purpose.\newline
39
F0:  Can have mask register, but not fallback register.\newline
40
F1:  Can have fallback register without mask register.\newline
41
I2:  Immediate source operand is integer regardless of specified operand type.\newline
42
M0:  Memory operand is destination.\newline
43
%M1:  E formats with a memory operand use IM3 as an extra immediate operand.\newline (obsolete)
44
On: n bits of IM3 in E template format used for options (IM3 can be used for shift count only if it is not used for options).\newline
45
R0:  Destination is a general purpose register.\newline
46
R1:  First source operand is a general purpose register.\newline
47
R2:  Second source operand is a general purpose register.\newline
48
RL:  RT is a general purpose register specifying vector length.\newline
49
U0:  Integer operands are unsigned.\newline
50
U3:  Integer operands are unsigned if option bit 3 is set.\newline \hspace{6mm}
51
     (compare instruction).\newline
52
H0:  Half precision floating point instruction.\newline
53
X0:  Source register can be a special pointer (threadp, datap, ip).\newline
54
X1:  Source register is special register.\newline
55
X2:  Source register is capabilities register.\newline
56
X3:  Source register is performance monitor register.\newline
57
X4:  Source register is system register.\newline
58
Y0-4:Destination register is one of the above.
59
\\ \hline
60
Source operands & Number of source operands, including register, memory and immediate operands, but not including mask, option bits, vector length, and index. \\
61
\hline
62
OP1 & Operation code OP1. \\
63
\hline
64
OP2 & Additional operation code OP2. Zero if none. \\
65
\hline
66
Operand types general purpose registers & Hexadecimal number indicating required and optional support for each operand type with general purpose registers. See table \ref{table:OperandTypesInInstructionList} below for meaning of each bit. \\
67
\hline
68
Operand types scalar & Hexadecimal number indicating required and optional support for each operand type for scalar operations in vector registers. See table \ref{table:OperandTypesInInstructionList} below for meaning of each bit. \\
69
\hline
70
Operand types vector & Hexadecimal number indicating required and optional support for each operand type for vector operations. See table \ref{table:OperandTypesInInstructionList} below for meaning of each bit. \\
71
\hline
72
Immediate operand type & Type of immediate operand for single-format instructions. See table \ref{table:immediateOperantTypesInInstructionList} below. \\
73
\hline
74
Description & Description of the instruction and comments. \\
75
\hline
76
\end{longtable}
77
 
78
\pagebreak % The text in the multirow box below disappears if there is a page break in it.
79
           % Put page break here instead to prevent this
80
\label{table_format_field_in_list}
81
\begin{longtable} {|p{18mm}|p{20mm} p{80mm}|}
82
\caption{Meaning of formats field in instruction list file}
83
\label{table:MeaningOfFormatsFieldInInstructionListFile}
84
\\
85
\endfirsthead
86
\endhead
87
\hline
88
\bfseries Category & \multicolumn{2}{|l|}{\bfseries Interpretation of formats field} \\
89
\hline
90
1.  Single format instruction & \multicolumn{2}{|p{102mm}|}{
91
Number with three hexadecimal digits. \newline
92
The leftmost digit is the value of the IL field (0-3). \newline
93
The middle digit is he value of mode field or the combined M+mode field (0-9).\newline
94
The rightmost digit is the sub-mode defined by OP2 in E template modes or OP1 in mode 2.5.x. Zero otherwise. \newline
95
For example 0x223 means format 2.2.3.
96
}  \\
97
\hline
98
% \pagebreak % The text in the multirow box disappears if there is a page break in it.
99
% Put pagebreak here to prevent this, or before the table
100
% \hline
101
\multirow{27}{*}{\parbox[t]{18mm}{3. Multi-format instruction}}
102
  &  \multicolumn{2}{|l|}{
103
     Hexadecimal number composed of one bit for each format supported:} \\
104
  &  0x0000001 & Format 0.0: three general purpose registers. \\
105
  &  0x0000002 & Format 0.1: two general purpose registers, 8-bit immediate. \\
106
  &  0x0000004 & Format 0.2: Three vector registers. \\
107
  &  0x0000008 & Format 0.3: Two vectors, 8-bit immediate. \\
108
  &  0x0000010 & Format 0.4: One vector, memory operand. \\
109
  &  0x0000020 & Format 0.5: One vector, memory operand with negative index. \\
110
  &  0x0000040 & Format 0.6: One vector, scalar memory operand with index. \\
111
  &  0x0000080 & Format 0.7: One vector, scalar memory operand with 8-bit offset. \\
112
  &  0x0000100 & Format 0.8: One g. p. register, memory operand with index. \\
113
  &  0x0000200 & Format 0.9: One g. p. register, memory operand with 8-bit offset. \\
114
 
115
  &  0x0001000 & Format 2.8: Three g. p. registers, 32-bit immediate. \\
116
  &  0x0002000 & Format 2.1: Two g. p. registers, memory with 32-bit offset. \\
117
  &  0x0004000 & Format 2.3: Three vector registers, 32-bit immediate. \\
118
  &  0x0008000 & Format 2.4: One vector register, memory with 32-bit offset. \\
119
 
120
  &  0x0010000 & Format 2.0.0: Three g. p. reg., memory with 16-bit offset. \\
121
  &  0x0020000 & Format 2.0.1: Two g. p. reg., memory with unscaled index. \\
122
  &  0x0040000 & Format 2.0.2: Two g. p. reg., memory with scaled index. \\
123
  &  0x0080000 & Format 2.0.3: Two g. p. reg., memory with index and limit.\\
124
  &  0x0400000 & Format 2.0.6: Four g. p. reg.\\
125
  &  0x0800000 & Format 2.0.7: Three g. p. registers, 16-bit shifted immediate. \\
126
 
127
  &  0x1000000 & Format 2.2.0: Two vector reg., scalar memory w. 16-bit offset. \\
128
  &  0x2000000 & Format 2.2.1: Two vector reg., memory with 16-bit offset. \\
129
  &  0x4000000 & Format 2.2.2: Two vector reg., memory with negative index. \\
130
  &  0x8000000 & Format 2.2.3: Two vector reg., scalar memory w. index and limit. \\
131
  & 0x40000000 & Format 2.2.6: Four vector reg. \\
132
  & 0x80000000 & Format 2.2.7: Three vector registers, 16-bit shifted immediate.\\
133
 
134
  & 0x100000000 & Format 3.8:   Three g. p. registers, 64-bit immediate. \\
135
  & 0x40000 0000 & Format 3.3:   Three vector registers, 64-bit immediate. \\
136
 
137
  &  0x100000 0000 & Format 3.0.0: Three g. p. reg., memory with 32-bit offset. \\
138
  &  0x800000 0000 & Format 3.0.3: Two g. p. reg., memory with index and 32-bit limit.\\
139
  &  0x2000000 0000 & Format 3.0.5: One g. p. reg., memory with index and 16-bit offset, 32-bit immediate.\\
140
  &  0x8000000 0000 & Format 3.0.7: Three g. p. registers, 32-bit shifted immediate. \\
141
 
142
  &  0x10000000 0000 & Format 3.2.0: Two vector reg., scalar memory w. 32-bit offset. \\
143
  &  0x20000000 0000 & Format 3.2.1: Two vector reg., memory with 32-bit offset. \\
144
  &  0x80000000 0000 & Format 3.2.3: Two vector reg., scalar memory index and 32-bit limit. \\
145
  &  0x200000000 0000 & Format 3.2.5: One vector reg., memory with 16-bit offset, and 32-bit immediate. \\
146
  &  0x800000000 0000 & Format 3.2.7: Three vector registers, float or 32-bit shifted immediate.\\
147
 
148
\hline
149
 
150
\multirow{12}{*}{\parbox[t]{18mm}{4. Jump instruction}}
151
  &  \multicolumn{2}{|l|}{
152
     Hexadecimal number composed of one bit for each format supported:} \\
153
  &  0x00001 & Format 1.6.0 B: Two registers, 8 bit offset. \\
154
  &  0x00002 & Format 1.7.1 C: One register, 8 bit immediate, 8 bit offset. \\
155
  &  0x00010 & Format 2.5.0 A: Three registers, 24 bit offset. \\
156
  &  0x00020 & Format 2.5.1 B: Two registers, 16 bit immediate, 16 bit offset. \\
157
  &  0x00040 & Format 2.5.2 B: One register, memory operand with 16 bit address, 16 bit  offset. \\
158
  &  0x00080 & Format 2.5.3 B: Unused. \\
159
  &  0x00100 & Format 2.5.4 C: One register, 8 bit immediate, 32 bit offset. \\
160
  &  0x00200 & Format 2.5.5 C: One register, 32 bit immediate, 8 bit offset. \\
161
  &  0x01000 & Format 3.1.0 A: Two registers, memory operand w 32 bit address, 24 bit offset. \\
162
  &  0x02000 & Format 3.1.1 B: Two registers, 32 bit immediate, 32 bit offset. \\
163
  &  0x10000 & Format 1.6.1 B: Memory operand with 8 bit offset. \\
164
  &  0x20000 & Format 1.6.2 A: Reg. and memory w. scaled index. \\
165
  &  0x40000 & Format 1.6.3 A: Three registers. \\
166
  &  0x100000 & Format 1.7.0 D: No register, 24 bit address. \\
167
%  &  0x200000 & Format 1.7.2 C: 16-bit offset. Unused \\
168
  &  0x400000 & Format 1.7.3 C: One register. \\
169
  &  0x800000 & Format 1.7.4 C: 16 bit immediate. \\
170
  &  0x1000000 & Format 1.7.5 C: 16 bit fixed immediate. \\
171
  &  0x2000000 & Format 1.7.A C: Format 1.7 with 64 bit operand size. \\
172
  &  0x10000000 & Format 2.5.1 X: Two registers, 2x16 bit immediate. \\
173
  &  0x20000000 & Format 2.5.2 X: One register, memory operand with 32 bit offset. \\
174
  &  0x40000000 & Format 2.5.4 X: 64 bit operand size. \\
175
  &  0x80000000 & Format 2.5.5 X: Conditional trap. \\
176
  &  0x100000000 & Format 2.5.7 C: System call, 16 bit function, 32 bit module. \\
177
  & 0x1000000 0000 & Format 3.1.1 X: System call, 32 bit function, 32 bit module. \\
178
\hline
179
\end{longtable}
180
 
181
\begin{longtable} {|p{18mm}|p{100mm}|}
182
\caption{
183
Indication of operand types supported for general purpose registers, scalars in vector
184
registers, or vectors. The value is a hexadecimal number composed of one bit for each operand
185
type supported}
186
\label{table:OperandTypesInInstructionList} \\
187
\endfirsthead
188
\endhead
189
\hline
190
0x0001 & 8-bit integer supported. \\
191
0x0002 & 16-bit integer supported. \\
192
0x0004 & 32-bit integer supported. \\
193
0x0008 & 64-bit integer supported. \\
194
0x0010 & 128-bit integer supported. \\
195
0x0020 & single precision floating point supported. \\
196
0x0040 & double precision floating point supported. \\
197
0x0080 & quadruple precision floating point supported. \\
198
0x0100 & 8-bit integer optionally supported. \\
199
0x0200 & 16-bit integer optionally supported. \\
200
0x0400 & 32-bit integer optionally supported. \\
201
0x0800 & 64-bit integer optionally supported. \\
202
0x1000 & 128-bit integer optionally supported. \\
203
0x2000 & single precision floating point optionally supported. \\
204
0x4000 & double precision floating point optionally supported. \\
205
0x8000 & quadruple precision floating point optionally supported. \\
206
\hline
207
\end{longtable}
208
 
209
\begin{longtable} {|p{18mm}|p{100mm}|}
210
\caption{
211
Immediate operand type for single-format instructions}
212
\label{table:immediateOperantTypesInInstructionList}
213
\\
214
\endfirsthead
215
\endhead
216
\hline
217
 
218
% 1 & 4-bit signed integer. \\
219
2 & 8-bit signed integer. \\
220
3 & 16-bit signed integer. \\
221
4 & 32-bit signed integer. \\
222
5 & 64-bit signed integer. \\
223
6 & 8-bit signed integer shifted by specified count. \\
224
7 & 16-bit signed integer shifted by specified count. \\
225
8 & 16-bit signed integer shifted by 16. \\
226
9 & 32-bit signed integer shifted by 32. \\
227
% 17 & 4-bit unsigned integer. \\
228
18 & 8-bit unsigned integer. \\
229
19 & 16-bit unsigned integer. \\
230
20 & 32-bit unsigned integer. \\
231
21 & 64-bit unsigned integer. \\
232
24 & two 8-bit unsigned integers. \\
233
25 & two 8-bit and one 6-bit unsigned integers. \\
234
26 & two 16-bit unsigned integers. \\
235
27 & one 16-bit and one 32-bit unsigned integer. \\
236
28 & two 32-bit unsigned integers. \\
237
29 & one 16-bit and two 8-bit unsigned integers. \\
238
% 33 & 4-bit unsigned integer converted to float. \\
239
34 & 8-bit signed integer converted to float. \\
240
35 & 16-bit signed integer converted to float. \\
241
64 & half precision floating point. \\
242
65 & single precision floating point. \\
243
66 & double precision floating point. \\
244
100 & determined by operand type. \\
245
in & a number prefixed by 'i' indicates an implicit value.
246
The implicit immediate operand with this value does not need to be written in the assembly code. \\
247
\hline
248
\end{longtable}
249
 
250
Jump instructions are listed on page \pageref{table:controlTransferInstructions}. All other categories of instructions are listed in the following tables.
251
 
252
 
253
\section{List of multi-format instructions}
254
The following list covers general instructions that can be coded in most or all of the formats
255
assigned to multi-format instructions.
256
 
257
\begin{longtable} {|p{25mm}|p{12mm}|p{12mm}|p{100mm}|}
258
\caption{
259
List of multi-format instructions}
260
\label{table:ListOfMultiFormatInstructions} \\
261
\endfirsthead
262
\endhead
263
\hline
264
\bfseries Instruction & \bfseries OP1 & \bfseries Source ope-rands & \bfseries Description \\
265
\hline
266
nop          &  0 & 0 & No operation. \\
267
store        &  1 & 1 & Store value to memory. \\
268
move         &  2 & 1 & Copy value. \\
269
prefetch     &  3 & 1 & Prefetch from memory. \\
270
sign\_extend &  4 & 1 & Sign-extend smaller integer to 64 bits. \\
271
sign\_extend\_ add & 5 & 2 & Sign-extend smaller integer to 64 bits and add 64-bit register. \\
272
compare      &  7 & 2 & Compare. Uses condition codes, see p. \pageref{table:conditionCodesForCompareInstruction}. \\
273
add          &  8 & 2 & src1 + src2. \\
274
sub          &  9 & 2 & src1 - src2. \\
275
sub\_rev     & 10 & 2 & src2 - src1. \\
276
mul          & 11 & 2 & src1 $\cdot$ src2. \\
277
mul\_hi      & 12 & 2 & (src1 $\cdot$ src2) $>>$ OS, signed (integer only). \\
278
mul\_hi\_u   & 13 & 2 & (src1 $\cdot$ src2) $>>$ OS, unsigned (integer only). \\
279
div          & 14 & 2 & src1 / src2, signed division (optional for integer vectors). \\
280
div\_u       & 15 & 2 & src1 / src2, unsigned integer division (optional for vectors). \\
281
div\_rev     & 16 & 2 & src2 / src1, signed division (optional for integer vectors). \\
282
rem          & 18 & 2 & Modulo or remainder, signed (optional for integer vectors). \\
283
rem\_u       & 19 & 2 & Modulo or remainder, unsigned (optional for integer vectors). \\
284
min          & 20 & 2 & Signed minimum. \\
285
min\_u       & 21 & 2 & Minimum. unsigned for integers, abs for f.p. \\
286
max          & 22 & 2 & Signed maximum. \\
287
max\_u       & 23 & 2 & Maximum. unsigned for integers, abs for f.p. \\
288
and          & 26 & 2 & src1 \& src2. \\
289
or           & 27 & 2 & src1 \textbar{} src2. \\
290
xor          & 28 & 2 & src1 \^{} src2. \\
291
mul\_2pow    & 32 & 2 & src1 * $2^{src2}$. Multiply by integer power of 2. Floating point only. \\
292
shift\_left  & 32 & 2 & src1 $<<$ src2. Shift left. Integer only. \\
293
rotate       & 33 & 2 & Rotate left if src2 positive, right if negative. \\
294
shift\_right\_s & 34 & 2 & src1 $>>$ src2. Integer shift right with sign extension.\\
295
shift\_right\_u & 35 & 2 & src1 $>>$ src2. Integer shift right with zero extension.\\
296
clear\_bit   & 36 & 2 & Clear bit. src1 \& \~{} (1 $<<$ src2). \\
297
set\_bit     & 37 & 2 & Set bit. src1 \textbar{} (1 $<<$ src2). \\
298
toggle\_bit  & 38 & 2 & Toggle bit. src1 \^{} (1 $<<$ src2). \\
299
test\_bit    & 39 & 2 & Test single bit. (src1 $>>$ src2) \& 1. \\
300
test\_bits\_and & 40 & 2 & Test if all indicated bits are 1. (src1 \& src2) == src2 \\test\_bits\_or   & 41 & 2 & Test if at least one indicated bit is 1. (src1 \& src2) != 0 \\
301
add          & 44 & 2 & src1 + scr2 (float16. optional). \\
302
sub          & 45 & 2 & src1 - scr2 (float16. optional). \\
303
mul          & 46 & 2 & src1 * scr2 (float16. optional). \\
304
mul\_add     & 48 & 3 & $\pm$ src1 $\cdot$ src2 $\pm$ src3 (float16. optional). \\
305
mul\_add     & 49 & 3 & $\pm$ src1 $\cdot$ src2 $\pm$ src3 (optional). \\
306
mul\_add2    & 50 & 3 & $\pm$ src1 $\cdot$ src3 $\pm$ src2 (optional). \\
307
add\_add     & 51 & 3 & $\pm$ src1 $\pm$ src2 $\pm$ src3 (optional). \\
308
select\_bits & 52 & 3 & src1 \& src3 \textbar{} src2 \& \~{}src3 \\
309
funnel\_shift & 53 & 3 & Concatenate src1 and src2 and shift right by src3. \\
310
userdef56 - userdef62
311
             & 56-62 & 2 & Reserved for user-defined instructions. \\
312
undef        & 63 & 2 & Undefined code. Generates trap. \\
313
\hline
314
\end{longtable}
315
 
316
 
317
\section{List of single-format instructions}
318
These instructions are mostly available in only one or a few formats.
319
 
320
\begin{longtable} {|p{25mm}|p{14mm}|p{10mm}|p{95mm}|}
321
\caption{List of single-format instructions with general purpose registers}
322
\label{table:ListOfSingleFormatInstructionsGP} \\
323
\endfirsthead
324
\endhead
325
\hline
326
\bfseries Instruction & \bfseries Format &\bfseries OP1 & \bfseries Description \\
327
\hline
328
move          & 1.1 C &  0 & Move 16-bit sign-extended constant to 32-bit general purpose register. \\
329
move          & 1.1 C &  1 & Move 16-bit sign-extended constant to 64-bit general purpose register. \\
330
move          & 1.1 C &  3 & Move 16-bit zero-extended constant to 64-bit general purpose register. \\
331
move          & 1.1 C & 4  & RD = IM2 \textless\textless{} IM1. Sign-extend IM2 to 32 bits and shift left by the unsigned value IM1. \\
332
move          & 1.1 C & 5  & RD = IM2 \textless\textless{} IM1. Sign-extend IM2 to 64 bits and shift left by the unsigned value IM1. \\
333
add           & 1.1 C &  6  & Add 16-bit sign-extended constant to 32-bit general purpose register.. \\
334
mul           & 1.1 C &  8  & Multiply 32-bit general purpose register by 16-bit sign-extended constant. \\
335
add           & 1.1 C & 10  & RD += IM2 \textless\textless{} IM1. Sign-extend IM2 to 32 bits, shift left by the unsigned value IM1, add to RD. \\
336
add           & 1.1 C & 11  & RD += IM2 \textless\textless{} IM1. Sign-extend IM2 to 64 bits, shift left by the unsigned value IM1, add to RD. \\
337
and           & 1.1 C & 12  & RD \&= IM2 \textless\textless{} IM1. Sign-extend IM2 to 32 bits, shift left by the unsigned value IM1, AND with RD. \\
338
and           & 1.1 C & 13  & RD \&= IM2 \textless\textless{} IM1. Sign-extend IM2 to 64 bits, shift left by the unsigned value IM1, AND with RD. \\
339
or            & 1.1 C & 14  & RD \textbar{}= IM2 \textless\textless{} IM1. Sign-extend IM2 to 32 bits, shift left by the unsigned value IM1, OR with RD. \\
340
or            & 1.1 C & 15  & RD \textbar{}= IM2 \textless\textless{} IM1. Sign-extend IM2 to 64 bits, shift left by the unsigned value IM1, OR with RD. \\
341
xor           & 1.1 C & 16  & RD \^{}= IM2 \textless\textless{} IM1. Sign-extend IM2 to 32 bits, shift left by the unsigned value IM1, XOR with RD. \\
342
xor           & 1.1 C & 17  & RD \^{}= IM2 \textless\textless{} IM1. Sign-extend IM2 to 64 bits, shift left by the unsigned value IM1, XOR with RD. \\
343
add           & 1.1 C & 18  & RD += (IM1,IM2) \textless\textless{} 16. Shift 16-bit zero-extended constant left by 16 and add to 32-bit general purpose register. \\
344
 
345
abs           & 1.8 B &  0  & Absolute value of integer. IM1 determines handling of overflow: 0: wrap around, 1: saturate, 2: zero. \\
346
%shift\_add    & 1.8 B &  1  & Shift and add. RD += RS \textless\textless{} IM1 \\
347
bitscan       & 1.8 B &  2 & Bit scan forward or reverse. Find index to first or last set bit. \\
348
roundp2       & 1.8 B &  3 & Round up or down to nearest power of 2. \\
349
popcount      & 1.8 B &  4 & Count the number of bits that are 1.\\
350
read\_spec    & 1.8 B & 32  & Read special register RS into g. p. register RD. \\
351
write\_spec   & 1.8 B & 33  & Write g. p. register RS to special register RD. \\
352
read\_capabi-lities & 1.8 B & 34  & Read capabilities register RS into g. p. register RD. \\
353
write\_capabi-lities & 1.8 B & 35  & Write g. p. register RS to capabilities register RD. \\
354
read\_perf    & 1.8 B & 36  & Read performance counter. \\
355
read\_perfs   & 1.8 B & 37  & Read performance counter, serializing. \\
356
read\_sys     & 1.8 B & 38  & Read system register RS into g. p. register RD. \\
357
write\_sys    & 1.8 B & 39  & Write g. p. register RS to system register RD. \\
358
push          & 1.8 B & 56  & Push g. p. register RS to stack with pointer RD. \\
359
pop           & 1.8 B & 57  & Pop g. p. register RS from stack with pointer RD. \\
360
input         & 1.8 B & 62  & Read RD from input port with address IM1 or RS. (privileged instruction) \\
361
output        & 1.8 B & 63  & Write RD to output port with address IM1 or RS. (privileged instruction) \\
362
 
363
truth\_tab3   & 2.0.6 E & 8.1 & Boolean function of three inputs, given by a truth table. \\
364
 
365
move\_bits    & 2.0.7 E & 0.1 & Replace one or more contiguous bits at one position of RS with contiguous bits from another position of RT. Optional. \\
366
 
367
move          & 2.9 A &  0  & Load 32-bit constant into the high part of a general purpose register. The low part is zero. RD = IM2 \textless\textless{} 32. \\
368
insert\_hi    & 2.9 A &  1  & Insert 32-bit constant into the high part of a general purpose register, leaving the low part unchanged.
369
RD = (RT \& 0xFFFFFFFF) \textbar{} (IM2 \textless\textless{} 32). \\
370
add           & 2.9 A &  2  & Add zero-extended 32-bit constant to general purpose register. \\
371
sub           & 2.9 A &  3  & Subtract zero-extended 32-bit constant from general purpose register. \\
372
add           & 2.9 A &  4  & Add 32-bit constant to high part of general purpose register. RD = RT + (IM2 \textless\textless{} 32). \\
373
and           & 2.9 A &  5  & AND high part of general purpose register with 32-bit constant. RD = RT \& (IM2 \textless\textless{} 32). \\
374
or            & 2.9 A &  6  & OR high part of general purpose register with 32-bit constant. RD = RT \textbar{} (IM2 \textless\textless{} 32). \\
375
xor           & 2.9 A &  7  & XOR high part of general purpose register with 32-bit constant. RD = RT \^{} (IM2 \textless\textless{} 32). \\
376
address       & 2.9 A & 32  & RD = RT + IM2, RT can be THREADP (28), DATAP (29) or IP (30). \\
377
\hline
378
\end{longtable}
379
 
380
 
381
\begin{longtable} {|p{25mm}|p{14mm}|p{10mm}|p{95mm}|}
382
\caption{List of single-format instructions with vector registers and mixed register types}
383
\label{table:ListOfSingleFormatInstructionsVector} \\
384
\endfirsthead
385
\endhead
386
\hline
387
\bfseries Instruction & \bfseries Format &\bfseries OP1. OP2 & \bfseries Description \\
388
\hline
389
get\_len      & 1.2 A &  0 & Get length of vector register RT into general purpose register RD. \\
390
get\_num      & 1.2 A &  1 & Get length of vector register RT divided by the operand size. \\
391
set\_len      & 1.2 A &  2 & RD = vector register RS with length changed to value of RT. \\
392
set\_num      & 1.2 A &  3 & Change the length of vector register RS to RT$\cdot$OS. \\
393
insert        & 1.2 A &  4 & Replace one element in vector RD, starting at offset RT$\cdot$OS, with scalar RS. \\
394
extract       & 1.2 A & 5 & Extract one element from vector RS, starting at offset RT$\cdot$OS, with size OS into scalar in vector register RD. \\
395
broad         & 1.2 A & 6 & Broadcast first element of vector RS into all elements of RD with length RT bytes. \\
396
compress\_ sparse& 1.2 A &  8 & Compress sparse vector elements indicated by mask bits into contiguous vector. (optional). \\
397
expand\_sparse& 1.2 A & 9 & Expand contiguous vector into sparse vector with positions indicated by mask bits. RT = length of output vector. (optional). \\
398
 
399
bits2bool     & 1.2 A & 12 & The lower n bits of RT are unpacked into a boolean vector RD with length RS, with one bit in each element, where n = RS / OS. \\
400
 
401
shift\_expand & 1.2 A & 16 & Shift vector RS up by RT bytes and extend the vector length by RT. The lower RT bytes of RD will be zero. \\
402
shift\_reduce & 1.2 A & 17 & Shift vector RS down RT bytes and reduce the length by RT. The lower RT bytes are lost. \\
403
shift\_up     & 1.2 A & 18 & Shift elements of vector RS up RT elements. The lower RT elements of RD will be zero, the upper RT elements are lost. \\
404
shift\_down   & 1.2 A & 19 & Shift elements of vector RS down RT elements. The upper RT elements of RD will be zero, the lower RT elements are lost. \\
405
%rotate\_up  & 1.2 A & 20 & Rotate vector up one element. Optional. \\
406
%rotate\_down  & 1.2 A & 21 & Rotate vector down one element. Optional. \\
407
 
408
div\_ex    & 1.2 A & 24 & Divide vector of double-size signed integers RS by signed integers RT. RS has element size 2$\cdot$OS. These are divided by the even numbered
409
elements of RT with size OS. The truncated results are stored in
410
the even-numbered elements of RD. The remainders are stored in
411
the odd-numbered elements of RD. (Optional for vectors). \\
412
div\_ex\_u    & 1.2 A & 25 & Same, with unsigned integers. (Optional for vectors). \\
413
mul\_ex       & 1.2 A & 26 & Multiply even-numbered signed integer vector elements to double size result. \\
414
mul\_ex\_u    & 1.2 A & 27 & Multiply even-numbered unsigned integer vector elements to double size result. \\
415
sqrt          & 1.2 A & 28 & Square root (floating point, optional). \\
416
 
417
add\_ss       & 1.2 A & 32 & Add integer vectors, signed with saturation (optional). \\
418
add\_us       & 1.2 A & 33 & Add integer vectors, unsigned with saturation (optional). \\
419
sub\_ss       & 1.2 A & 34 & Subtract integer vectors, signed with saturation (optional). \\
420
sub\_us       & 1.2 A & 35 & Subtract integer vectors, unsigned with saturation (optional). \\
421
mul\_ss       & 1.2 A & 36 & Multiply integer vectors, signed with saturation (optional). \\
422
mul\_us       & 1.2 A & 37 & Multiply integer vectors, unsigned with saturation (optional). \\
423
add\_oc       & 1.2 A & 38 & add with overflow check (optional). \\
424
sub\_oc       & 1.2 A & 39 & subtract with overflow check (optional). \\
425
mul\_oc       & 1.2 A & 40 & multiply with overflow check (optional). \\
426
div\_oc       & 1.2 A & 41 & divide with overflow check (optional). \\
427
add\_c        & 1.2 A & 42 & Add with carry. Vector has two elements. The upper element is used as carry on input and output (optional). \\
428
sub\_b        & 1.2 A & 43 & Subtract with borrow. Vector has two elements. The upper element is used as borrow on input and output (optional). \\
429
 
430
read\_spev    & 1.2 A & 56 & read special vector register. Length RT. \\
431
read\_call\_ stack & 1.2 A & 58 & read internal call stack. RD = vector register destination of length RS, RT-RS = internal address (privileged instruction). \\
432
write\_call\_ stack & 1.2 A & 59 & write internal call stack. RD = vector register source of length RS, RT-RS = internal address (privileged instruction). \\
433
 
434
read\_memory\_ map & 1.2 A & 60 & read memory map. RD = vector register destination of length RS, RT-RS = internal address (privileged instruction). \\
435
write\_memory\_ map & 1.2 A & 61 & write memory map. RD = vector register source of length RS, RT-RS = internal address (privileged instruction). \\
436
 
437
input         & 1.2 A & 62 & read from input port. RD = vector register, RT = port address, RS = vector length (privileged instruction). \\
438
output        & 1.2 A & 63 & write to output port. RD = vector register source operand, RT = port address, RS = vector length (privileged instruction). \\
439
 
440
gp2vec        & 1.3 B &  0 & Move value of general purpose register RS to scalar in vector register RD. \\
441
 
442
vec2gp        & 1.3 B &  1 & Move value of first element of vector register RS to general purpose register RD. \\
443
 
444
make\_sequen-ce& 1.3 B & 3 & Make a vector with RS sequential numbers. First value is IM1. \\
445
 
446
insert        & 1.3 B &  4 & Replace one element in vector RD, starting at offset IM1$\cdot$OS, with first element in RS. \\
447
 
448
extract       & 1.3 B & 5 & Extract one element from vector RS, starting at offset IM1$\cdot$OS into a scalar in vector register RD. \\
449
 
450
compress      & 1.3 B  &  6 & Compress vector to half the length and half the element size. Double precision $\rightarrow$ single precision, 64-bit
451
integer $\rightarrow$ 32-bit integer, etc. \\
452
 
453
expand        & 1.3 B &  7 & Expand vector to the double length and the double element size. Half precision $\rightarrow$ single precision, 32-bit integer $\rightarrow$ 64-bit integer, etc. \\
454
 
455
float2int     & 1.3 B & 12 & Conversion of floating point to integer with the same operand size. The rounding mode is specified in IM1. \\
456
int2float     & 1.3 B & 13 & Conversion of integer to floating point with same operand size. \\
457
 
458
round         & 1.3 B & 14 & Round floating point to integer in floating point  representation. The rounding mode is specified in IM1. \\
459
round2n       & 1.3 B & 15 & Round to nearest multiple of $2^n$. \newline
460
RD = $2^n\cdot$ round($2^{-n}\cdot$ RS). $n$ is a signed integer constant in IM1 (optional). \\
461
abs           & 1.3 B & 16 & Absolute value of integer. IM1 determines handling of overflow: 0: wrap around, 1: saturate, 2: zero. \\
462
 
463
fp\_category  & 1.3 B & 17 & Check if floating point numbers belong to the categories indicated by constant. \\
464
 
465
broad         & 1.3 B & 18 & Broadcast 8-bit constant into all elements of RD with length RS (31 in RS field gives scalar output). \\
466
 
467
broadcast\_ max & 1.3 B & 19 & Broadcast 8-bit constant into all elements of RD with maximum vector length. \\
468
 
469
byte\_reverse & 1.3 B & 20 & Reverse the order of bytes in each element of vector. \\
470
bit\_reverse  & 1.3 B & 20 & Reverse the order of bits in each element of vector (optional). \\
471
 
472
bitscan       & 1.3 B & 21 & Bit scan forward or reverse. Find index to lowest set bit. \\
473
 
474
popcount      & 1.3 B & 22 & Count the number of bits that are 1 (optional for vectors). \\
475
 
476
bool2bits     & 1.3 B & 25 & A boolean vector with n elements is packed into the lower n bits of RD, taking bit 0 of each element. The length of RD is at least sufficient to contain n bits. \\
477
 
478
bool\_reduce  & 1.3 B & 26 & An integer vector is reduced by combining bit 0 of all elements. The output is a scalar integer where bit 0 is the
479
AND combination of all the bits, and bit 1 is the OR combination of
480
all the bits. The remaining bits are reserved for future use. \\
481
 
482
category\_ reduce & 1.3 B & 26 & A floating point vector is reduced to a scalar integer where each bit indicates that the source vector contains at least one element in a certain category, such as NAN, zero, normal positive, etc. \\
483
 
484
push          & 1.3 B & 56  & Push vector register RS to stack with pointer RD. \\
485
pop           & 1.3 B & 57  & Pop vector register RS from stack with pointer RD. \\
486
clear         & 1.3 B & 58  & Clear vector register RS. \\
487
 
488
move          & 1.4 C &  0 & Move 16 bit integer constant to 16-bit scalar (optional). \\
489
add           & 1.4 C &  1 & Add broadcasted 16 bit constant to 16-bit vector elements (optional). \\
490
and           & 1.4 C &  2 & AND broadcasted 16 bit constant with 16-bit vector elements (optional). \\
491
or            & 1.4 C &  3 & OR broadcasted 16 bit constant with 16-bit vector elements (optional). \\
492
xor           & 1.4 C &  4 & XOR broadcasted 16 bit constant with 16-bit vector elements (optional). \\
493
 
494
move          & 1.4 C &  8 & RD = IM2 \textless\textless{} IM1. Sign-extend IM2 to 32 bits and shift left by the unsigned value IM1 to make 32 bit scalar (optional). \\
495
move          & 1.4 C &  9 & RD = IM2 \textless\textless{} IM1. Sign-extend IM2 to 64 bits and shift left by the unsigned value IM1 to make 64 bit scalar (optional). \\
496
add           & 1.4 C & 10 & RD += IM2 \textless\textless{} IM1. Add broadcast shifted signed constant to 32-bit vector elements (optional). \\
497
add           & 1.4 C & 11 & RD += IM2 \textless\textless{} IM1. Add broadcast shifted signed constant to 64-bit vector elements (optional). \\
498
and           & 1.4 C & 12 & RD \&= IM2 \textless\textless{} IM1. AND broadcast shifted signed constant with 32-bit vector elements (optional). \\
499
and           & 1.4 C & 13 & RD \&= IM2 \textless\textless{} IM1. AND broadcast shifted signed constant with 64-bit vector elements (optional). \\
500
or            & 1.4 C & 14 & RD \textbar{}= IM2 \textless\textless{} IM1. OR broadcast shifted signed constant with 32-bit vector elements (optional). \\
501
or            & 1.4 C & 15 & RD \textbar{}= IM2 \textless\textless{} IM1. OR broadcast shifted signed constant with 64-bit vector elements (optional). \\
502
xor           & 1.4 C & 16 & RD \^{}= IM2 \textless\textless{} IM1. XOR broadcast shifted signed constant with 32-bit vector elements (optional). \\
503
xor           & 1.4 C & 17 & RD \^{}= IM2 \textless\textless{} IM1. XOR broadcast shifted signed constant with 64-bit vector elements (optional). \\
504
 
505
move          & 1.4 C & 32 & Move converted half precision floating point constant to single
506
precision scalar (optional). \\
507
move          & 1.4 C & 33 & Move converted half precision floating point constant to double
508
precision scalar (optional). \\
509
add           & 1.4 C & 34 & Add broadcast half precision floating point constant to single
510
precision vector (optional). \\
511
add           & 1.4 C & 35 & Add broadcast half precision floating point constant to double
512
precision vector (optional). \\
513
mul           & 1.4 C & 36 & Multiply broadcast half precision floating point constant with single precision vector (optional). \\
514
mul           & 1.4 C & 37 & Multiply broadcast half precision floating point constant with double precision vector (optional). \\
515
add\_h        & 1.4 C & 40 & add constant to half precision vector (optional). \\
516
mul\_h        & 1.4 C & 41 & multiply half precision vector with constant (optional). \\
517
concatenate   & 2.2.6 E & 0.1 & A vector RU of length RT and a vector RS of length RT are concatenated into a vector RD of length 2$\cdot$RT. \\
518
permute       & 2.2.6 E & 1.1 & The vector elements of RU are permuted within each block of size RT bytes, using indices in RS. Each index is relative to the
519
beginning of a block. An index out of range produces zero. The
520
maximum block size is implementation dependent. \\
521
interleave    & 2.2.6 E & 2.1 & Interleave elements of vectors RU and RS of length RT/2 to produce vector RD of length RT. Even-numbered elements of the destination come from RU and odd-numbered elements from RS. (optional). \\
522
truth\_tab3   & 2.2.6 E & 8.1 & Boolean function of three inputs, given by a truth table. \\
523
 
524
move\_bits    & 2.2.7 E & 0.1 & Replace one or more contiguous bits at one position of RS with contiguous bits from another position of RT. Optional \\
525
mask\_length  & 2.2.7 E & 1.1 & Make mask with true in the first RT bytes. Option bits in IM2. \\
526
repeat\_block  & 2.2.7 E & 8.1 & Repeat a block of data to make a longer vector. RS is input vector containing data block to repeat. IM2 is length in bytes of the block to repeat (must be a multiple of 4). RT is the length of destination vector RD. (optional). \\
527
repeat\_within \_blocks & 2.2.7 E & 9.1 & Broadcast the first element of each block of data in a vector to the entire block. RS is input vector containing data blocks. IM2 is length in bytes of each block (must be a multiple of the operand size). RT is length of destination vector RD. The operand size must be at least 4 bytes. (optional). \\
528
 
529
load\_hi      & 2.6 A & 0 & Make vector of two elements. dest[0] = 0, dest[1] = IM2. \\
530
insert\_hi    & 2.6 A & 1 & Make vector of two elements. dest[0] = src1[0], dest[1] = IM2. \\
531
make\_mask    & 2.6 A & 2 & Make vector where bit 0 of each element comes from bits in IM2, the remaining bits come from RT. \\
532
replace       & 2.6 A & 3 & Replace elements in RT by constant IM2. \\
533
replace\_even & 2.6 A & 4 & Replace even-numbered elements in RT by constant
534
IM2. \\
535
replace\_odd  & 2.6 A & 5 & Replace odd-numbered elements in RT by constant
536
IM2. \\
537
broad         & 2.6 A & 6 & Broadcast 32-bit or float32 constant into all elements of RD with length RT (31 in RT field gives scalar output). \\
538
permute       & 2.6 A & 8 & The vector elements of RS are permuted within each block of size RT bytes. The 4$\cdot$n bits of IM2 are used as index with 4 bits for
539
each element in blocks of size n. The same pattern is used in each
540
block. The number of elements in each block, n = RT / OS $\leq$ 8. \\
541
replace       & 3.1 A & 32 & Replace elements in RT by constant IM2,IM3. \\
542
broad         & 3.1 A & 33 & Broadcast 64-bit or float64 constant into all elements of RD with length RT (31 in RT field gives scalar output). \\
543
\hline
544
\end{longtable}
545
 
546
\begin{longtable} {|p{25mm}|p{14mm}|p{10mm}|p{95mm}|}
547
\caption{List of single-format instructions with memory operands.}
548
\label{table:ListOfSingleFormatInstructionsMemory} \\
549
\endfirsthead
550
\endhead
551
\hline
552
\bfseries Instruction & \bfseries Format &\bfseries OP1, OP2 & \bfseries Description \\
553
\hline
554
store         & 2.5 B &  8 & Store 32-bit constant IM2 to memory operand [RS+IM1] (optional). \\
555
 
556
fence         & 2.5 B & 16 & Memory fence at address [RS+IM2]. read, write or full indicated by IM1.\\
557
 
558
compare\_swap & 2.5 B & 18 & Atomic compare and exchange with address [RS+IM2].\\
559
 
560
read\_insert  & 2.5 A & 32 & Replace one element in vector RD, starting at offset
561
RT$\cdot$OS, with scalar memory operand [RS+IM2] (optional).  \\
562
 
563
extract\_store& 2.5 A & 40 & Extract one element from vector RD, starting at offset RT$\cdot$OS, with size OS into memory operand [RS+IM2] (optional). \\
564
 
565
\hline
566
\end{longtable}
567
\vspace{4mm}
568
 
569
 
570
 
571
\section{List of control transfer instructions}
572
 
573
\begin{longtable}
574
{|p{12mm}|p{16mm}|p{60mm}|p{55mm}|}
575
%\nopagebreak
576
\caption{Condition codes for control transfer instructions with integer operands in general purpose registers }
577
\label{table:controlTransferInstructions}
578
\endfirsthead
579
\endhead
580
\hline
581
\bfseries OPJ & \bfseries bit 0 \newline of OPJ & \bfseries Instruction & \bfseries Comment \\
582
\hline
583
0-7 & part of offset & Unconditional jump with 24-bit offset (jump) & Format 1.7 D. Bit 0-2 of OPJ are part of offset \\
584
\hline
585
8-15 & part of offset & Unconditional call with 24-bit offset (call) & Format 1.7 D.  Bit 0-2 of OPJ are part of offset \\
586
\hline
587
0-1 & invert & sub/jump\_zero, \newline sub/jump\_nzero & Not format 1.7. Not floating point \\
588
\hline
589
2-3 & invert & sub/jump\_neg, \newline sub/jump\_nneg & Not format 1.7. Not floating point  \\
590
\hline
591
4-5 & invert & sub/jump\_pos, \newline sub/jump\_npos & Not format 1.7. Not floating point \\
592
\hline
593
6-7 & invert & sub/jump\_overfl, \newline sub/jump\_noverfl & Not format 1.7. Not floating point \\
594
\hline
595
8-9 & invert & sub/jump\_borrow, \newline sub/jump\_nborrow & Not format 1.7. Not floating point \\
596
\hline
597
10-11 & invert & and/jump\_zero \newline and/jump\_nzero & Not format 1.7 \\
598
\hline
599
12-13 & invert & or/jump\_zero \newline or/jump\_nzero & Not format 1.7 \\
600
\hline
601
14-15 & invert & xor/jump\_zero, \newline xor/jump\_nzero & Not format 1.7 \\
602
\hline
603
16-17 & invert & add/jump\_zero, \newline add/jump\_nzero & Not floating point \\
604
\hline
605
18-19 & invert & add/jump\_neg, \newline add/jump\_nneg & Not floating point \\
606
\hline
607
20-21 & invert & add/jump\_pos, \newline add/jump\_npos & Not floating point \\
608
\hline
609
22-23 & invert & add/jump\_overfl, \newline add/jump\_noverfl & Not floating point \\
610
\hline
611
24-25 & invert & add/jump\_carry, \newline add/jump\_ncarry & Not floating point \\
612
\hline
613
26-27 & invert & test\_bit/jump\_true, \newline test\_bit/jump\_false &  \\
614
\hline
615
28-29 & invert & test\_bits\_and/jump\_true, \newline test\_bits\_and/jump\_false &  \\
616
\hline
617
30-31 & invert & test\_bits\_or/jump\_true, \newline test\_bits\_or/jump\_false & \\
618
\hline
619
32-33 & invert & compare/jump\_equal, \newline compare/jump\_nequal & \\
620
\hline
621
34-35 & invert & compare/jump\_sbelow, \newline compare/jump\_saboveeq &  \\
622
\hline
623
36-37 & invert & compare/jump\_sabove, \newline compare/jump\_sbeloweq &  \\
624
\hline
625
38-39 & invert & compare/jump\_ubelow, \newline compare/jump\_uaboveeq &  \\
626
\hline
627
40-41 & invert & compare/jump\_uabove, \newline compare/jump\_ubeloweq & \\
628
\hline
629
42-47 & invert & Reserved for future use. & \\
630
\hline
631
 
632
48-49 & invert & increment\_compare/jump\_below, \newline /jump\_aboveeq & \\
633
\hline
634
50-51 & invert & increment\_compare/jump\_above, \newline /jump\_beloweq & \\
635
\hline
636
52-53 & invert & sub\_maxlen/jump\_pos, \newline sub\_maxlen/jump\_npos &  \\
637
\hline
638
54-57 &  & Reserved for future use. & \\
639
\hline
640
58-59 & 0 jump \newline 1 call & Indirect jump or call with memory operand. & Format 1.6 B and 2.5.2. \\
641
\hline
642
58-59 & 0 jump \newline 1 call & Unconditional direct jump or call & 2.5.4, and 3.1.1. \\
643
\hline
644
60-61 & 0 jump\_ relative \newline 1 call\_ relative & Jump or call with relative address in memory, table index, and arbitrary reference point &
645
Format 1.6 A and 2.5.2 \\
646
\hline
647
60-61 & 0 jump \newline 1 call & Indirect jump or call to value of register & Format 1.7 C \\
648
\hline
649
62 & 0 & return  & Format 1.6 C  \\
650
\hline
651
62 & 0 & sys\_return & Format 1.7 C  \\
652
\hline
653
63 & 1 & sys\_call. ID in register & Format 1.6 A \\
654
\hline
655
63 & 1 & sys\_call. ID in constants & Format 2.5.7 and 3.1.1. \\
656
\hline
657
63 & 1 & trap or filler & Format 1.7 C \\
658
\hline
659
63 & 1 & Conditional traps & Format 2.5.5. \\
660
\hline
661
\end{longtable}
662
 
663
 
664
\begin{longtable}
665
{|p{10mm}|p{14mm}|p{65mm}|p{40mm}|}
666
%\nopagebreak
667
\caption{Condition codes for control transfer instructions with floating point operands in vector registers }
668
\label{table:controlTransferInstructionsFloat}
669
\endfirsthead
670
\endhead
671
\hline
672
OPJ & bit 0 \newline of OPJ & Instruction & Comment \\
673
\hline
674
32-33 & invert & compare/jump\_equal, \newline compare/jump\_nequal & false if unordered \\
675
\hline
676
0-1 & invert & compare/jump\_equal\_uo, \newline compare/jump\_nequal\_uo & true if unordered \\
677
\hline
678
34-35 & invert & compare/jump\_below, \newline compare/jump\_aboveeq & false if unordered \\
679
\hline
680
2-3 & invert & compare/jump\_below\_uo, \newline compare/jump\_aboveeq\_uo & true if unordered \\
681
\hline
682
36-37 & invert & compare/jump\_above, \newline compare/jump\_beloweq & false if unordered \\
683
\hline
684
4-5 & invert & compare/jump\_above\_uo, \newline compare/jump\_beloweq\_uo & true if unordered \\
685
\hline
686
38-39 & invert & compare/jump\_abs\_below, \newline compare/jump\_abs\_aboveeq & false if unordered \\
687
\hline
688
6-7 & invert & compare/jump\_abs\_below\_uo, \newline compare/jump\_abs\_aboveeq\_uo & true if unordered \\
689
\hline
690
40-41 & invert & compare/jump\_abs\_above, \newline compare/jump\_abs\_beloweq & false if unordered \\
691
\hline
692
8-9 & invert & compare/jump\_abs\_above\_uo, \newline compare/jump\_abs\_beloweq\_uo & true if unordered \\
693
\hline
694
24-25 & invert & fp\_category/jump\_true, \newline fp\_category/jump\_false &  \\
695
\hline
696
 
697
 
698
\multicolumn{4}{|c|}{} \\
699
\multicolumn{4}{|c|}{ The following instructions treat floating point operands as integers in vector registers: } \\
700
\multicolumn{4}{|c|}{} \\
701
\hline
702
 
703
10-11 & invert & and/jump\_zero \newline and/jump\_nzero & \\
704
\hline
705
12-13 & invert & or/jump\_zero \newline or/jump\_nzero &  \\
706
\hline
707
14-15 & invert & xor/jump\_zero, \newline xor/jump\_nzero &  \\
708
\hline
709
26-27 & invert & test\_bit/jump\_true, \newline test\_bit/jump\_false &  \\
710
\hline
711
28-29 & invert & test\_bits\_and/jump\_true, \newline test\_bits\_and/jump\_false &  \\
712
\hline
713
30-31 & invert & test\_bits\_or/jump\_true, \newline test\_bits\_or/jump\_false & \\
714
\hline
715
 
716
\end{longtable}
717
 
718
 
719
See page \pageref{descriptionOfControlTransferInstructions} for
720
detailed descriptions of control transfer instructions.
721
 
722
 
723
\end{document}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.