OpenCores
URL https://opencores.org/ocsvn/mpeg2fpga/mpeg2fpga/trunk

Subversion Repositories mpeg2fpga

[/] [mpeg2fpga/] [trunk/] [rtl/] [mpeg2/] [xilinx_fifo_sc.v] - Blame information for rev 2

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 kdv
/*
2
 * xilinx_fifo_sc.v
3
 *
4
 * Copyright (c) 2007 Koen De Vleeschauwer.
5
 *
6
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
7
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
8
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
9
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
10
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
11
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
12
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
13
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
14
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
15
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
16
 * SUCH DAMAGE.
17
 */
18
 
19
/*
20
 * fifo with common clock for read and write port.
21
 */
22
 
23
`include "timescale.v"
24
 
25
module xilinx_fifo_sc (
26
        clk,
27
        rst,
28
        din,
29
        wr_en,
30
        full,
31
        wr_ack,
32
        overflow,
33
        prog_full,
34
        dout,
35
        rd_en,
36
        empty,
37
        valid,
38
        underflow,
39
        prog_empty
40
        );
41
 
42
  parameter [8:0]dta_width=9'd8;      /* Data bus width */
43
  parameter [8:0]addr_width=9'd8;     /* Address bus width, determines fifo size by evaluating 2^addr_width */
44
  parameter [8:0]prog_thresh=9'd1;    /* Programmable threshold constant for prog_empty and prog_full */
45
 
46
  input          clk;
47
  input          rst;         /* low active sync master reset */
48
  /* read port */
49
  output [dta_width-1:0]dout; /* data output */
50
  input          rd_en;       /* read enable */
51
  output         empty;       /* asserted if fifo is empty; no additional reads can be performed */
52
  output         valid;       /* valid (read acknowledge): indicates rd_en was asserted during previous clock cycle and data was succesfully read from fifo and placed on dout */
53
  output         underflow;   /* underflow (read error): indicates rd_en was asserted during previous clock cycle but no data was read from fifo because fifo was empty */
54
  output         prog_empty;  /* indicates the fifo has prog_thresh entries, or less. threshold for asserting prog_empty is prog_thresh */
55
  /* write port */
56
  input  [dta_width-1:0]din;  /* data input */
57
  input          wr_en;       /* write enable */
58
  output         full;        /* asserted if fifo is full; no additional writes can be performed */
59
  output         overflow;    /* overflow (write error): indicates wr_en was asserted during previous clock cycle but no data was written to fifo because fifo was full */
60
  output         wr_ack;      /* write acknowledge: indicates wr_en was asserted during previous clock cycle and data was succesfully written to fifo */
61
  output         prog_full;   /* indicates the fifo has prog_thresh free entries, or less, left. threshold for asserting prog_full is 2^addr_width - prog_thresh */
62
 
63
  /* Writing when the fifo is full, or reading while the fifo is empty, does not destroy the contents of the fifo. */
64
 
65
  xilinx_fifo #(
66
    .ALMOST_FULL_OFFSET(prog_thresh),
67
    .ALMOST_EMPTY_OFFSET(prog_thresh),
68
    .DATA_WIDTH(dta_width),
69
    .ADDR_WIDTH(addr_width),
70
    .DO_REG(0),
71
    .EN_SYN("TRUE")
72
    )
73
  xilinx_fifo_sc (
74
    .ALMOSTEMPTY(prog_empty),
75
    .ALMOSTFULL(prog_full),
76
    .DO(dout),
77
    .EMPTY(empty),
78
    .FULL(full),
79
    .RDERR(underflow),
80
    .VALID(valid),
81
    .WRERR(overflow),
82
    .WR_ACK(wr_ack),
83
    .DI(din),
84
    .RDCLK(clk),
85
    .RDEN(rd_en),
86
    .RST(rst),
87
    .WRCLK(clk),
88
    .WREN(wr_en)
89
     );
90
 
91
`ifdef CHECK_GENERATE
92
    initial
93
      $display("%m: fifo parameters: dta_width=%0d addr_width=%0d prog_thresh=%0d", dta_width, addr_width, prog_thresh);
94
`endif
95
 
96
endmodule
97
/* not truncated */

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.