OpenCores
URL https://opencores.org/ocsvn/neorv32/neorv32/trunk

Subversion Repositories neorv32

[/] [neorv32/] [trunk/] [sw/] [lib/] [include/] [neorv32.h] - Blame information for rev 41

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 zero_gravi 
// #################################################################################################
2 
// # << NEORV32: neorv32.h - Main Core Library File >>                                             #
3 
// # ********************************************************************************************* #
4 
// # BSD 3-Clause License                                                                          #
5 
// #                                                                                               #
6 
// # Copyright (c) 2020, Stephan Nolting. All rights reserved.                                     #
7 
// #                                                                                               #
8 
// # Redistribution and use in source and binary forms, with or without modification, are          #
9 
// # permitted provided that the following conditions are met:                                     #
10 
// #                                                                                               #
11 
// # 1. Redistributions of source code must retain the above copyright notice, this list of        #
12 
// #    conditions and the following disclaimer.                                                   #
13 
// #                                                                                               #
14 
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of     #
15 
// #    conditions and the following disclaimer in the documentation and/or other materials        #
16 
// #    provided with the distribution.                                                            #
17 
// #                                                                                               #
18 
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to  #
19 
// #    endorse or promote products derived from this software without specific prior written      #
20 
// #    permission.                                                                                #
21 
// #                                                                                               #
22 
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS   #
23 
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF               #
24 
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE    #
25 
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,     #
26 
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
27 
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    #
28 
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING     #
29 
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED  #
30 
// # OF THE POSSIBILITY OF SUCH DAMAGE.                                                            #
31 
// # ********************************************************************************************* #
32 
// # The NEORV32 Processor - https://github.com/stnolting/neorv32              (c) Stephan Nolting #
33 
// #################################################################################################
34 
 
35 
 
36 
/**********************************************************************//**
37 
 * @file neorv32.h
38 
 * @author Stephan Nolting
39 
 *
40 20 zero_gravi 
 * @brief Main NEORV32 core library include file.
41 2 zero_gravi 
 **************************************************************************/
42 
 
43 
#ifndef neorv32_h
44 
#define neorv32_h
45 
 
46 
// Standard libraries
47 
#include <stdint.h>
48 
#include <inttypes.h>
49 
#include <limits.h>
50 
 
51 
 
52 
/**********************************************************************//**
53 
 * Available CPU Control and Status Registers (CSRs)
54 
 **************************************************************************/
55 
enum NEORV32_CPU_CSRS_enum {
56 41 zero_gravi 
  CSR_MSTATUS       = 0x300, /**< 0x300 - mstatus    (r/w): Machine status register */
57 
  CSR_MISA          = 0x301, /**< 0x301 - misa       (r/-): CPU ISA and extensions (read-only in NEORV32) */
58 
  CSR_MIE           = 0x304, /**< 0x304 - mie        (r/w): Machine interrupt-enable register */
59 
  CSR_MTVEC         = 0x305, /**< 0x305 - mtvec      (r/w): Machine trap-handler base address (for ALL traps) */
60 
  CSR_MCOUNTEREN    = 0x306, /**< 0x305 - mcounteren (r/w): Machine counter enable register (controls access rights from U-mode) */
61 
  CSR_MSTATUSH      = 0x310, /**< 0x310 - mstatush   (r/-): Machine status register - high word */
62 2 zero_gravi 
 
63 41 zero_gravi 
  CSR_MCOUNTINHIBIT = 0x320, /**< 0x320 - mcountinhibit (r/w): Machine counter-inhibit register */
64 2 zero_gravi 
 
65 41 zero_gravi 
  CSR_MSCRATCH      = 0x340, /**< 0x340 - mscratch (r/w): Machine scratch register */
66 
  CSR_MEPC          = 0x341, /**< 0x341 - mepc     (r/w): Machine exception program counter */
67 
  CSR_MCAUSE        = 0x342, /**< 0x342 - mcause   (r/w): Machine trap cause */
68 
  CSR_MTVAL         = 0x343, /**< 0x343 - mtval    (r/w): Machine bad address or instruction */
69 
  CSR_MIP           = 0x344, /**< 0x344 - mip      (r/w): Machine interrupt pending register */
70 15 zero_gravi 
 
71 41 zero_gravi 
  CSR_PMPCFG0       = 0x3a0, /**< 0x3a0 - pmpcfg0 (r/w): Physical memory protection configuration register 0 */
72 
  CSR_PMPCFG1       = 0x3a1, /**< 0x3a1 - pmpcfg1 (r/w): Physical memory protection configuration register 1 */
73 15 zero_gravi 
 
74 41 zero_gravi 
  CSR_PMPADDR0      = 0x3b0, /**< 0x3b0 - pmpaddr0 (r/w): Physical memory protection address register 0 */
75 
  CSR_PMPADDR1      = 0x3b1, /**< 0x3b1 - pmpaddr1 (r/w): Physical memory protection address register 1 */
76 
  CSR_PMPADDR2      = 0x3b2, /**< 0x3b2 - pmpaddr2 (r/w): Physical memory protection address register 2 */
77 
  CSR_PMPADDR3      = 0x3b3, /**< 0x3b3 - pmpaddr3 (r/w): Physical memory protection address register 3 */
78 
  CSR_PMPADDR4      = 0x3b4, /**< 0x3b4 - pmpaddr4 (r/w): Physical memory protection address register 4 */
79 
  CSR_PMPADDR5      = 0x3b5, /**< 0x3b5 - pmpaddr5 (r/w): Physical memory protection address register 5 */
80 
  CSR_PMPADDR6      = 0x3b6, /**< 0x3b6 - pmpaddr6 (r/w): Physical memory protection address register 6 */
81 
  CSR_PMPADDR7      = 0x3b7, /**< 0x3b7 - pmpaddr7 (r/w): Physical memory protection address register 7 */
82 18 zero_gravi 
 
83 41 zero_gravi 
  CSR_MCYCLE        = 0xb00, /**< 0xb00 - mcycle    (r/w): Machine cycle counter low word */
84 
  CSR_MINSTRET      = 0xb02, /**< 0xb02 - minstret  (r/w): Machine instructions-retired counter low word */
85 2 zero_gravi 
 
86 41 zero_gravi 
  CSR_MCYCLEH       = 0xb80, /**< 0xb80 - mcycleh   (r/w): Machine cycle counter high word */
87 
  CSR_MINSTRETH     = 0xb82, /**< 0xb82 - minstreth (r/w): Machine instructions-retired counter high word */
88 2 zero_gravi 
 
89 41 zero_gravi 
  CSR_CYCLE         = 0xc00, /**< 0xc00 - cycle    (r/-): Cycle counter low word (from MCYCLE) */
90 
  CSR_TIME          = 0xc01, /**< 0xc01 - time     (r/-): Timer low word (from MTIME.TIME_LO) */
91 
  CSR_INSTRET       = 0xc02, /**< 0xc02 - instret  (r/-): Instructions-retired counter low word (from MINSTRET) */
92 2 zero_gravi 
 
93 41 zero_gravi 
  CSR_CYCLEH        = 0xc80, /**< 0xc80 - cycleh   (r/-): Cycle counter high word (from MCYCLEH) */
94 
  CSR_TIMEH         = 0xc81, /**< 0xc81 - timeh    (r/-): Timer high word (from MTIME.TIME_HI) */
95 
  CSR_INSTRETH      = 0xc82, /**< 0xc82 - instreth (r/-): Instructions-retired counter high word (from MINSTRETH) */
96 22 zero_gravi 
 
97 41 zero_gravi 
  CSR_MVENDORID     = 0xf11, /**< 0xf11 - mvendorid (r/-): Vendor ID */
98 
  CSR_MARCHID       = 0xf12, /**< 0xf12 - marchid   (r/-): Architecture ID */
99 
  CSR_MIMPID        = 0xf13, /**< 0xf13 - mimpid    (r/-): Implementation ID/version */
100 
  CSR_MHARTID       = 0xf14, /**< 0xf14 - mhartid   (r/-): Hardware thread ID (always 0) */
101 
 
102 
  CSR_MZEXT         = 0xfc0  /**< 0xfc0 - mzext (custom CSR) (r/-): Available Z* CPU extensions */
103 2 zero_gravi 
};
104 
 
105 
 
106 
/**********************************************************************//**
107 
 * CPU <b>mstatus</b> CSR (r/w): Machine status (RISC-V spec.)
108 
 **************************************************************************/
109 
enum NEORV32_CPU_MSTATUS_enum {
110 40 zero_gravi 
  CPU_MSTATUS_MIE   =  3, /**< CPU mstatus CSR (3): MIE - Machine interrupt enable bit (r/w) */
111 41 zero_gravi 
  CPU_MSTATUS_UBE   =  6, /**< CPU mstatus CSR (6): UBE - User-mode endianness (little-endian=0, big-endian=1) (r/-) */
112 40 zero_gravi 
  CPU_MSTATUS_MPIE  =  7, /**< CPU mstatus CSR (7): MPIE - Machine previous interrupt enable bit (r/w) */
113 
  CPU_MSTATUS_MPP_L = 11, /**< CPU mstatus CSR (11): MPP_L - Machine previous privilege mode bit low (r/w) */
114 
  CPU_MSTATUS_MPP_H = 12  /**< CPU mstatus CSR (12): MPP_H - Machine previous privilege mode bit high (r/w) */
115 2 zero_gravi 
};
116 
 
117 
 
118 
/**********************************************************************//**
119 41 zero_gravi 
 * CPU <b>mstatush</b> CSR (r/-): Machine status - high word (RISC-V spec.)
120 40 zero_gravi 
 **************************************************************************/
121 
enum NEORV32_CPU_MSTATUSH_enum {
122 41 zero_gravi 
  CPU_MSTATUSH_MBE = 5 /**< CPU mstatush CSR (5): MBE - Machine-mode endianness (little-endian=0, big-endian=1) (r/-) */
123 40 zero_gravi 
};
124 
 
125 
 
126 
/**********************************************************************//**
127 41 zero_gravi 
 * CPU <b>mcounteren</b> CSR (r/w): Machine counter enable (RISC-V spec.)
128 
 **************************************************************************/
129 
enum NEORV32_CPU_MCOUNTEREN_enum {
130 
  CPU_MCOUNTEREN_CY = 0, /**< CPU mcounteren CSR (0): CY - Allow access to cycle[h] CSRs from U-mode when set (r/w) */
131 
  CPU_MCOUNTEREN_TM = 1, /**< CPU mcounteren CSR (1): TM - Allow access to time[h] CSRs from U-mode when set (r/w) */
132 
  CPU_MCOUNTEREN_IR = 2  /**< CPU mcounteren CSR (2): IR - Allow access to instret[h] CSRs from U-mode when set (r/w) */
133 
};
134 
 
135 
 
136 
/**********************************************************************//**
137 
 * CPU <b>mcountinhibit</b> CSR (r/w): Machine counter-inhibit (RISC-V spec.)
138 
 **************************************************************************/
139 
enum NEORV32_CPU_MCOUNTINHIBIT_enum {
140 
  CPU_MCOUNTINHIBIT_CY = 0, /**< CPU mcountinhibit CSR (0): CY - Enable auto-increment of [m]cycle[h] CSR when set (r/w) */
141 
  CPU_MCOUNTINHIBIT_IR = 2  /**< CPU mcountinhibit CSR (2): IR - Enable auto-increment of [m]instret[h] CSR when set (r/w) */
142 
};
143 
 
144 
 
145 
/**********************************************************************//**
146 2 zero_gravi 
 * CPU <b>mie</b> CSR (r/w): Machine interrupt enable (RISC-V spec.)
147 
 **************************************************************************/
148 
enum NEORV32_CPU_MIE_enum {
149 40 zero_gravi 
  CPU_MIE_MSIE   =  3, /**< CPU mie CSR (3): MSIE - Machine software interrupt enable (r/w) */
150 
  CPU_MIE_MTIE   =  7, /**< CPU mie CSR (7): MTIE - Machine timer interrupt enable bit (r/w) */
151 
  CPU_MIE_MEIE   = 11, /**< CPU mie CSR (11): MEIE - Machine external interrupt enable bit (r/w) */
152 
  CPU_MIE_FIRQ0E = 16, /**< CPU mie CSR (16): FIRQ0E - Fast interrupt channel 0 enable bit (r/w) */
153 
  CPU_MIE_FIRQ1E = 17, /**< CPU mie CSR (17): FIRQ1E - Fast interrupt channel 1 enable bit (r/w) */
154 
  CPU_MIE_FIRQ2E = 18, /**< CPU mie CSR (18): FIRQ2E - Fast interrupt channel 2 enable bit (r/w) */
155 
  CPU_MIE_FIRQ3E = 19  /**< CPU mie CSR (19): FIRQ3E - Fast interrupt channel 3 enable bit (r/w) */
156 2 zero_gravi 
};
157 
 
158 
 
159 
/**********************************************************************//**
160 12 zero_gravi 
 * CPU <b>mip</b> CSR (r/-): Machine interrupt pending (RISC-V spec.)
161 2 zero_gravi 
 **************************************************************************/
162 
enum NEORV32_CPU_MIP_enum {
163 40 zero_gravi 
  CPU_MIP_MSIP   =  3, /**< CPU mip CSR (3): MSIP - Machine software interrupt pending (r/-) */
164 
  CPU_MIP_MTIP   =  7, /**< CPU mip CSR (7): MTIP - Machine timer interrupt pending (r/-) */
165 
  CPU_MIP_MEIP   = 11, /**< CPU mip CSR (11): MEIP - Machine external interrupt pending (r/-) */
166 14 zero_gravi 
 
167 40 zero_gravi 
  CPU_MIP_FIRQ0P = 16, /**< CPU mip CSR (16): FIRQ0P - Fast interrupt channel 0 pending (r/-) */
168 
  CPU_MIP_FIRQ1P = 17, /**< CPU mip CSR (17): FIRQ1P - Fast interrupt channel 1 pending (r/-) */
169 
  CPU_MIP_FIRQ2P = 18, /**< CPU mip CSR (18): FIRQ2P - Fast interrupt channel 2 pending (r/-) */
170 
  CPU_MIP_FIRQ3P = 19  /**< CPU mip CSR (19): FIRQ3P - Fast interrupt channel 3 pending (r/-) */
171 2 zero_gravi 
};
172 
 
173 
 
174 
/**********************************************************************//**
175 16 zero_gravi 
 * CPU <b>misa</b> CSR (r/-): Machine instruction set extensions (RISC-V spec.)
176 6 zero_gravi 
 **************************************************************************/
177 
enum NEORV32_CPU_MISA_enum {
178 39 zero_gravi 
  CPU_MISA_A_EXT      =  0, /**< CPU misa CSR  (0): A: Atomic instructions CPU extension available (r/-)*/
179 
  CPU_MISA_B_EXT      =  1, /**< CPU misa CSR  (1): B: Bit manipulation CPU extension available (r/-)*/
180 15 zero_gravi 
  CPU_MISA_C_EXT      =  2, /**< CPU misa CSR  (2): C: Compressed instructions CPU extension available (r/-)*/
181 39 zero_gravi 
  CPU_MISA_E_EXT      =  4, /**< CPU misa CSR  (4): E: Embedded CPU extension available (r/-) */
182 
  CPU_MISA_F_EXT      =  4, /**< CPU misa CSR  (5): F: Floating point (single-precision) extension available (r/-) */
183 6 zero_gravi 
  CPU_MISA_I_EXT      =  8, /**< CPU misa CSR  (8): I: Base integer ISA CPU extension available (r/-) */
184 15 zero_gravi 
  CPU_MISA_M_EXT      = 12, /**< CPU misa CSR (12): M: Multiplier/divider CPU extension available (r/-)*/
185 
  CPU_MISA_U_EXT      = 20, /**< CPU misa CSR (20): U: User mode CPU extension available (r/-)*/
186 6 zero_gravi 
  CPU_MISA_X_EXT      = 23, /**< CPU misa CSR (23): X: Non-standard CPU extension available (r/-) */
187 
  CPU_MISA_MXL_LO_EXT = 30, /**< CPU misa CSR (30): MXL.lo: CPU data width (r/-) */
188 
  CPU_MISA_MXL_HI_EXT = 31  /**< CPU misa CSR (31): MXL.Hi: CPU data width (r/-) */
189 
};
190 
 
191 
 
192 
/**********************************************************************//**
193 33 zero_gravi 
 * CPU <b>mzext</b> custom CSR (r/-): Implemented Z* CPU extensions
194 
 **************************************************************************/
195 
enum NEORV32_CPU_MZEXT_enum {
196 
  CPU_MZEXT_ZICSR    = 0, /**< CPU mzext CSR (0): Zicsr extension available when set (r/-) */
197 
  CPU_MZEXT_ZIFENCEI = 1, /**< CPU mzext CSR (1): Zifencei extension available when set (r/-) */
198 41 zero_gravi 
  CPU_MZEXT_PMP      = 2  /**< CPU mzext CSR (2): PMP extension available when set (r/-) */
199 33 zero_gravi 
};
200 
 
201 
 
202 
/**********************************************************************//**
203 14 zero_gravi 
 * Trap codes from mcause CSR.
204 2 zero_gravi 
 **************************************************************************/
205 12 zero_gravi 
enum NEORV32_EXCEPTION_CODES_enum {
206 31 zero_gravi 
  TRAP_CODE_I_MISALIGNED = 0x00000000, /**< 0.0:  Instruction address misaligned */
207 
  TRAP_CODE_I_ACCESS     = 0x00000001, /**< 0.1:  Instruction (bus) access fault */
208 
  TRAP_CODE_I_ILLEGAL    = 0x00000002, /**< 0.2:  Illegal instruction */
209 
  TRAP_CODE_BREAKPOINT   = 0x00000003, /**< 0.3:  Breakpoint (EBREAK instruction) */
210 
  TRAP_CODE_L_MISALIGNED = 0x00000004, /**< 0.4:  Load address misaligned */
211 
  TRAP_CODE_L_ACCESS     = 0x00000005, /**< 0.5:  Load (bus) access fault */
212 
  TRAP_CODE_S_MISALIGNED = 0x00000006, /**< 0.6:  Store address misaligned */
213 
  TRAP_CODE_S_ACCESS     = 0x00000007, /**< 0.7:  Store (bus) access fault */
214 40 zero_gravi 
  TRAP_CODE_UENV_CALL    = 0x00000008, /**< 0.8:  Environment call from user mode (ECALL instruction) */
215 14 zero_gravi 
  TRAP_CODE_MENV_CALL    = 0x0000000b, /**< 0.11: Environment call from machine mode (ECALL instruction) */
216 40 zero_gravi 
  TRAP_CODE_RESET        = 0x80000000, /**< 1.0:  Hardware reset */
217 31 zero_gravi 
  TRAP_CODE_MSI          = 0x80000003, /**< 1.3:  Machine software interrupt */
218 
  TRAP_CODE_MTI          = 0x80000007, /**< 1.7:  Machine timer interrupt */
219 14 zero_gravi 
  TRAP_CODE_MEI          = 0x8000000b, /**< 1.11: Machine external interrupt */
220 
  TRAP_CODE_FIRQ_0       = 0x80000010, /**< 1.16: Fast interrupt channel 0 */
221 
  TRAP_CODE_FIRQ_1       = 0x80000011, /**< 1.17: Fast interrupt channel 1 */
222 
  TRAP_CODE_FIRQ_2       = 0x80000012, /**< 1.18: Fast interrupt channel 2 */
223 
  TRAP_CODE_FIRQ_3       = 0x80000013  /**< 1.19: Fast interrupt channel 3 */
224 12 zero_gravi 
};
225 
 
226 
 
227 
/**********************************************************************//**
228 2 zero_gravi 
 * Processor clock prescalers
229 
 **************************************************************************/
230 
enum NEORV32_CLOCK_PRSC_enum {
231 
  CLK_PRSC_2    =  0, /**< CPU_CLK / 2 */
232 
  CLK_PRSC_4    =  1, /**< CPU_CLK / 4 */
233 
  CLK_PRSC_8    =  2, /**< CPU_CLK / 8 */
234 
  CLK_PRSC_64   =  3, /**< CPU_CLK / 64 */
235 
  CLK_PRSC_128  =  4, /**< CPU_CLK / 128 */
236 
  CLK_PRSC_1024 =  5, /**< CPU_CLK / 1024 */
237 
  CLK_PRSC_2048 =  6, /**< CPU_CLK / 2048 */
238 
  CLK_PRSC_4096 =  7  /**< CPU_CLK / 4096 */
239 
};
240 
 
241 
 
242 
/**********************************************************************//**
243 34 zero_gravi 
 * Official NEORV32 >RISC-V open-source architecture ID<
244 
 * https://github.com/riscv/riscv-isa-manual/blob/master/marchid.md
245 32 zero_gravi 
 **************************************************************************/
246 
#define NEORV32_ARCHID 19
247 
 
248 
 
249 
/**********************************************************************//**
250 2 zero_gravi 
 * @name Helper macros for easy memory-mapped register access
251 
 **************************************************************************/
252 
/**@{*/
253 
/** memory-mapped byte (8-bit) read/write register */
254 
#define IO_REG8  (volatile uint8_t*)
255 
/** memory-mapped half-word (16-bit) read/write register */
256 
#define IO_REG16 (volatile uint16_t*)
257 
/** memory-mapped word (32-bit) read/write register */
258 
#define IO_REG32 (volatile uint32_t*)
259 
/** memory-mapped double-word (64-bit) read/write register */
260 
#define IO_REG64 (volatile uint64_t*)
261 
/** memory-mapped byte (8-bit) read-only register */
262 
#define IO_ROM8  (const volatile uint8_t*)
263 
/** memory-mapped half-word (16-bit) read-only register */
264 
#define IO_ROM16 (const volatile uint16_t*)
265 
/** memory-mapped word (32-bit) read-only register */
266 
#define IO_ROM32 (const volatile uint32_t*)
267 
/** memory-mapped double-word (64-bit) read-only register */
268 
#define IO_ROM64 (const volatile uint64_t*)
269 
/**@}*/
270 
 
271 
 
272 
/**********************************************************************//**
273 
 * @name Address space sections
274 
 **************************************************************************/
275 
/**@{*/
276 
/** instruction memory base address (r/w/x) */
277 23 zero_gravi 
// -> configured via ispace_base_c constant in neorv32_package.vhd and available to SW via SYSCONFIG entry
278 2 zero_gravi 
/** data memory base address (r/w/x) */
279 23 zero_gravi 
// -> configured via dspace_base_c constant in neorv32_package.vhd and available to SW via SYSCONFIG entry
280 2 zero_gravi 
/** bootloader memory base address (r/-/x) */
281 6 zero_gravi 
#define BOOTLOADER_BASE_ADDRESS (0xFFFF0000UL)
282 2 zero_gravi 
/** peripheral/IO devices memory base address (r/w/x) */
283 6 zero_gravi 
#define IO_BASE_ADDRESS (0xFFFFFF80UL)
284 2 zero_gravi 
/**@}*/
285 
 
286 
 
287 
/**********************************************************************//**
288 
 * @name IO Device: General Purpose Input/Output Port Unit (GPIO)
289 
 **************************************************************************/
290 
/**@{*/
291 23 zero_gravi 
/** read access: GPIO parallel input port 32-bit (r/-), write_access: pin-change IRQ for each input pin (-/w) */
292 
#define GPIO_INPUT  (*(IO_REG32 0xFFFFFF80UL))
293 22 zero_gravi 
/** GPIO parallel output port 32-bit (r/w) */
294 6 zero_gravi 
#define GPIO_OUTPUT (*(IO_REG32 0xFFFFFF84UL))
295 2 zero_gravi 
/**@}*/
296 
 
297 
 
298 
/**********************************************************************//**
299 30 zero_gravi 
 * @name IO Device: True Random Number Generator (TRNG)
300 18 zero_gravi 
 **************************************************************************/
301 
/**@{*/
302 30 zero_gravi 
/** TRNG control/data register (r/w) */
303 
#define TRNG_CT (*(IO_REG32 0xFFFFFF88UL))
304 
 
305 
/** TRNG control/data register bits */
306 
enum NEORV32_TRNG_CT_enum {
307 
  TRNG_CT_DATA_LSB =  0, /**< TRNG data/control register(0)  (r/-): Random data (8-bit) LSB */
308 
  TRNG_CT_DATA_MSB =  7, /**< TRNG data/control register(7)  (r/-): Random data (8-bit) MSB */
309 
  TRNG_CT_VALID    = 15, /**< TRNG data/control register(15) (r/-): Random data output valid */
310 
  TRNG_CT_ERROR_0  = 16, /**< TRNG data/control register(16) (r/-): Stuck-at-zero error */
311 
  TRNG_CT_ERROR_1  = 17, /**< TRNG data/control register(17) (r/-): Stuck-at-one error */
312 
  TRNG_CT_EN       = 31  /**< TRNG data/control register(31) (r/w): TRNG enable */
313 
};
314 18 zero_gravi 
/**@}*/
315 
 
316 
 
317 
/**********************************************************************//**
318 2 zero_gravi 
 * @name IO Device: Watchdog Timer (WDT)
319 
 **************************************************************************/
320 
/**@{*/
321 
/** Watchdog control register (r/w) */
322 6 zero_gravi 
#define WDT_CT (*(IO_REG32 0xFFFFFF8CUL))
323 2 zero_gravi 
 
324 
/** WTD control register bits */
325 
enum NEORV32_WDT_CT_enum {
326 
  WDT_CT_CLK_SEL0     =  0, /**< WDT control register(0) (r/w): Clock prescaler select bit 0 */
327 
  WDT_CT_CLK_SEL1     =  1, /**< WDT control register(1) (r/w): Clock prescaler select bit 1 */
328 
  WDT_CT_CLK_SEL2     =  2, /**< WDT control register(2) (r/w): Clock prescaler select bit 2 */
329 
  WDT_CT_EN           =  3, /**< WDT control register(3) (r/w): Watchdog enable */
330 
  WDT_CT_MODE         =  4, /**< WDT control register(4) (r/w): Watchdog mode; when 0: timeout causes interrupt; when 1: timeout causes processor reset */
331 
  WDT_CT_CAUSE        =  5, /**< WDT control register(5) (r/-): Last action (reset/IRQ) cause (0: external reset, 1: watchdog timeout) */
332 
  WDT_CT_PWFAIL       =  6, /**< WDT control register(6) (r/-): Last Watchdog action (reset/IRQ) caused by wrong password when 1 */
333 
 
334 
  WDT_CT_PASSWORD_LSB =  8, /**< WDT control register(8)  (-/w): First bit / position begin for watchdog access password */
335 
  WDT_CT_PASSWORD_MSB = 15  /**< WDT control register(15) (-/w): Last bit / position end for watchdog access password */
336 
};
337 
 
338 
/** Watchdog access passwort, must be set in WDT_CT bits 15:8 for every control register access */
339 
#define WDT_PASSWORD 0x47
340 
/**@}*/
341 
 
342 
 
343 
/**********************************************************************//**
344 
 * @name IO Device: Machine System Timer (MTIME)
345 
 **************************************************************************/
346 
/**@{*/
347 11 zero_gravi 
/** MTIME (time register) low word (r/w) */
348 
#define MTIME_LO     (*(IO_REG32 0xFFFFFF90UL))
349 
/** MTIME (time register) high word (r/w) */
350 
#define MTIME_HI     (*(IO_REG32 0xFFFFFF94UL))
351 2 zero_gravi 
/** MTIMECMP (time compare register) low word (r/w) */
352 6 zero_gravi 
#define MTIMECMP_LO  (*(IO_REG32 0xFFFFFF98UL))
353 2 zero_gravi 
/** MTIMECMP (time register) high word (r/w) */
354 6 zero_gravi 
#define MTIMECMP_HI  (*(IO_REG32 0xFFFFFF9CUL))
355 2 zero_gravi 
 
356 11 zero_gravi 
/** MTIME (time register) 64-bit access (r/w) */
357 
#define MTIME        (*(IO_REG64 (&MTIME_LO)))
358 2 zero_gravi 
/** MTIMECMP (time compare register) low word (r/w) */
359 
#define MTIMECMP     (*(IO_REG64 (&MTIMECMP_LO)))
360 
/**@}*/
361 
 
362 
 
363 
/**********************************************************************//**
364 
 * @name IO Device: Universal Asynchronous Receiver and Transmitter (UART)
365 
 **************************************************************************/
366 
/**@{*/
367 
/** UART control register (r/w) */
368 6 zero_gravi 
#define UART_CT  (*(IO_REG32 0xFFFFFFA0UL))
369 2 zero_gravi 
/** UART receive/transmit data register (r/w) */
370 6 zero_gravi 
#define UART_DATA (*(IO_REG32 0xFFFFFFA4UL))
371 2 zero_gravi 
 
372 
/** UART control register bits */
373 
enum NEORV32_UART_CT_enum {
374 30 zero_gravi 
  UART_CT_BAUD00   =  0, /**< UART control register(0)  (r/w): BAUD rate config value lsb (12-bi, bit 0) */
375 
  UART_CT_BAUD01   =  1, /**< UART control register(1)  (r/w): BAUD rate config value (12-bi, bit 1) */
376 
  UART_CT_BAUD02   =  2, /**< UART control register(2)  (r/w): BAUD rate config value (12-bi, bit 2) */
377 
  UART_CT_BAUD03   =  3, /**< UART control register(3)  (r/w): BAUD rate config value (12-bi, bit 3) */
378 
  UART_CT_BAUD04   =  4, /**< UART control register(4)  (r/w): BAUD rate config value (12-bi, bit 4) */
379 
  UART_CT_BAUD05   =  5, /**< UART control register(5)  (r/w): BAUD rate config value (12-bi, bit 4) */
380 
  UART_CT_BAUD06   =  6, /**< UART control register(6)  (r/w): BAUD rate config value (12-bi, bit 5) */
381 
  UART_CT_BAUD07   =  7, /**< UART control register(7)  (r/w): BAUD rate config value (12-bi, bit 6) */
382 
  UART_CT_BAUD08   =  8, /**< UART control register(8)  (r/w): BAUD rate config value (12-bi, bit 7) */
383 
  UART_CT_BAUD09   =  9, /**< UART control register(9)  (r/w): BAUD rate config value (12-bi, bit 8) */
384 
  UART_CT_BAUD10   = 10, /**< UART control register(10) (r/w): BAUD rate config value (12-bi, bit 9) */
385 
  UART_CT_BAUD11   = 11, /**< UART control register(11) (r/w): BAUD rate config value msb (12-bi, bit 0) */
386 2 zero_gravi 
 
387 30 zero_gravi 
  UART_CT_SIM_MODE = 12, /**< UART control register(12) (r/w): Simulation output override enable, for use in simulation only */
388 
 
389 
  UART_CT_PRSC0    = 24, /**< UART control register(24) (r/w): BAUD rate clock prescaler select bit 0 */
390 
  UART_CT_PRSC1    = 25, /**< UART control register(25) (r/w): BAUD rate clock prescaler select bit 1 */
391 
  UART_CT_PRSC2    = 26, /**< UART control register(26) (r/w): BAUD rate clock prescaler select bit 2 */
392 
  UART_CT_RXOR     = 27, /**< UART control register(27) (r/-): RX data overrun when set */
393 
  UART_CT_EN       = 28, /**< UART control register(28) (r/w): UART global enable */
394 
  UART_CT_RX_IRQ   = 29, /**< UART control register(29) (r/w): Activate interrupt on RX done */
395 
  UART_CT_TX_IRQ   = 30, /**< UART control register(30) (r/w): Activate interrupt on TX done */
396 
  UART_CT_TX_BUSY  = 31  /**< UART control register(31) (r/-): Transmitter is busy when set */
397 2 zero_gravi 
};
398 
 
399 
/** UART receive/transmit data register bits */
400 
enum NEORV32_UART_DATA_enum {
401 
  UART_DATA_LSB   =  0, /**< UART receive/transmit data register(0)  (r/w): Receive/transmit data LSB (bit 0) */
402 
  UART_DATA_MSB   =  7, /**< UART receive/transmit data register(7)  (r/w): Receive/transmit data MSB (bit 7) */
403 
  UART_DATA_AVAIL = 31  /**< UART receive/transmit data register(31) (r/-): RX data available when set */
404 
};
405 
/**@}*/
406 
 
407 
 
408 
/**********************************************************************//**
409 10 zero_gravi 
 * @name IO Device: Serial Peripheral Interface Controller (SPI)
410 2 zero_gravi 
 **************************************************************************/
411 
/**@{*/
412 
/** SPI control register (r/w) */
413 6 zero_gravi 
#define SPI_CT  (*(IO_REG32 0xFFFFFFA8UL))
414 2 zero_gravi 
/** SPI receive/transmit data register (r/w) */
415 6 zero_gravi 
#define SPI_DATA (*(IO_REG32 0xFFFFFFACUL))
416 2 zero_gravi 
 
417 
/** SPI control register bits */
418 
enum NEORV32_SPI_CT_enum {
419 
  SPI_CT_CS0    =  0, /**< UART control register(0) (r/w): Direct chip select line 0 (output is low when set) */
420 
  SPI_CT_CS1    =  1, /**< UART control register(1) (r/w): Direct chip select line 1 (output is low when set) */
421 
  SPI_CT_CS2    =  2, /**< UART control register(2) (r/w): Direct chip select line 2 (output is low when set) */
422 
  SPI_CT_CS3    =  3, /**< UART control register(3) (r/w): Direct chip select line 3 (output is low when set) */
423 
  SPI_CT_CS4    =  4, /**< UART control register(4) (r/w): Direct chip select line 4 (output is low when set) */
424 
  SPI_CT_CS5    =  5, /**< UART control register(5) (r/w): Direct chip select line 5 (output is low when set) */
425 
  SPI_CT_CS6    =  6, /**< UART control register(6) (r/w): Direct chip select line 6 (output is low when set) */
426 
  SPI_CT_CS7    =  7, /**< UART control register(7) (r/w): Direct chip select line 7 (output is low when set) */
427 
 
428 
  SPI_CT_EN     =  8, /**< UART control register(8) (r/w): SPI unit enable */
429 
  SPI_CT_CPHA   =  9, /**< UART control register(9) (r/w): Clock polarity (idle polarity) */
430 
  SPI_CT_PRSC0  = 10, /**< UART control register(10) (r/w): Clock prescaler select bit 0 */
431 
  SPI_CT_PRSC1  = 11, /**< UART control register(11) (r/w): Clock prescaler select bit 1 */
432 
  SPI_CT_PRSC2  = 12, /**< UART control register(12) (r/w): Clock prescaler select bit 2 */
433 36 zero_gravi 
  SPI_CT_SIZE0  = 13, /**< UART control register(13) (r/w): Transfer data size lsb (00: 8-bit, 01: 16-bit, 10: 24-bit, 11: 32-bit) */
434 
  SPI_CT_SIZE1  = 14, /**< UART control register(14) (r/w): Transfer data size msb (00: 8-bit, 01: 16-bit, 10: 24-bit, 11: 32-bit) */
435 
  SPI_CT_IRQ_EN = 15, /**< UART control register(15) (r/w): Transfer done interrupt enable */
436 2 zero_gravi 
 
437 
  SPI_CT_BUSY   = 31  /**< UART control register(31) (r/-): SPI busy flag */
438 
};
439 
/**@}*/
440 
 
441 
 
442 
/**********************************************************************//**
443 10 zero_gravi 
 * @name IO Device: Two-Wire Interface Controller (TWI)
444 2 zero_gravi 
 **************************************************************************/
445 
/**@{*/
446 
/** TWI control register (r/w) */
447 6 zero_gravi 
#define TWI_CT   (*(IO_REG32 0xFFFFFFB0UL))
448 2 zero_gravi 
/** TWI receive/transmit data register (r/w) */
449 6 zero_gravi 
#define TWI_DATA (*(IO_REG32 0xFFFFFFB4UL))
450 2 zero_gravi 
 
451 
/** TWI control register bits */
452 
enum NEORV32_TWI_CT_enum {
453 
  TWI_CT_EN     =  0, /**< TWI control register(0) (r/w): TWI enable */
454 
  TWI_CT_START  =  1, /**< TWI control register(1) (-/w): Generate START condition, auto-clears */
455 
  TWI_CT_STOP   =  2, /**< TWI control register(2) (-/w): Generate STOP condition, auto-clears */
456 
  TWI_CT_IRQ_EN =  3, /**< TWI control register(3) (r/w): Enable transmission done interrupt */
457 
  TWI_CT_PRSC0  =  4, /**< TWI control register(4) (r/w): Clock prescaler select bit 0 */
458 
  TWI_CT_PRSC1  =  5, /**< TWI control register(5) (r/w): Clock prescaler select bit 1 */
459 
  TWI_CT_PRSC2  =  6, /**< TWI control register(6) (r/w): Clock prescaler select bit 2 */
460 10 zero_gravi 
  TWI_CT_MACK   =  7, /**< TWI control register(7) (r/w): Generate controller ACK for each transmission */
461 35 zero_gravi 
  TWI_CT_CKSTEN =  8, /**< TWI control register(8) (r/w): Enable clock stretching (by peripheral) */
462 2 zero_gravi 
 
463 
  TWI_CT_ACK    = 30, /**< TWI control register(30) (r/-): ACK received when set */
464 
  TWI_CT_BUSY   = 31  /**< TWI control register(31) (r/-): Transfer in progress, busy flag */
465 
};
466 
 
467 
/** WTD receive/transmit data register bits */
468 
enum NEORV32_TWI_DATA_enum {
469 
  TWI_DATA_LSB = 0, /**< TWI data register(0) (r/w): Receive/transmit data (8-bit) LSB */
470 
  TWI_DATA_MSB = 7  /**< TWI data register(7) (r/w): Receive/transmit data (8-bit) MSB */
471 
};
472 
/**@}*/
473 
 
474 
 
475 
/**********************************************************************//**
476 
 * @name IO Device: Pulse Width Modulation Controller (PWM)
477 
 **************************************************************************/
478 
/**@{*/
479 
/** PWM control register (r/w) */
480 6 zero_gravi 
#define PWM_CT   (*(IO_REG32 0xFFFFFFB8UL)) // r/w: control register
481 2 zero_gravi 
/** PWM duty cycle register (4-channels) (r/w) */
482 6 zero_gravi 
#define PWM_DUTY (*(IO_REG32 0xFFFFFFBCUL)) // r/w: duty cycle channel 1 and 0
483 2 zero_gravi 
 
484 
/** PWM control register bits */
485 
enum NEORV32_PWM_CT_enum {
486 
  PWM_CT_EN    =  0, /**< PWM control register(0) (r/w): PWM controller enable */
487 
  PWM_CT_PRSC0 =  1, /**< PWM control register(1) (r/w): Clock prescaler select bit 0 */
488 
  PWM_CT_PRSC1 =  2, /**< PWM control register(2) (r/w): Clock prescaler select bit 1 */
489 
  PWM_CT_PRSC2 =  3  /**< PWM control register(3) (r/w): Clock prescaler select bit 2 */
490 
};
491 
 
492 
/**PWM duty cycle register bits */
493 
enum NEORV32_PWM_DUTY_enum {
494 
  PWM_DUTY_CH0_LSB =  0, /**< PWM duty cycle register(0)  (r/w): Channel 0 duty cycle (8-bit) LSB */
495 
  PWM_DUTY_CH0_MSB =  7, /**< PWM duty cycle register(7)  (r/w): Channel 0 duty cycle (8-bit) MSB */
496 
  PWM_DUTY_CH1_LSB =  8, /**< PWM duty cycle register(8)  (r/w): Channel 1 duty cycle (8-bit) LSB */
497 
  PWM_DUTY_CH1_MSB = 15, /**< PWM duty cycle register(15) (r/w): Channel 1 duty cycle (8-bit) MSB */
498 
  PWM_DUTY_CH2_LSB = 16, /**< PWM duty cycle register(16) (r/w): Channel 2 duty cycle (8-bit) LSB */
499 
  PWM_DUTY_CH2_MSB = 23, /**< PWM duty cycle register(23) (r/w): Channel 2 duty cycle (8-bit) MSB */
500 
  PWM_DUTY_CH3_LSB = 24, /**< PWM duty cycle register(24) (r/w): Channel 3 duty cycle (8-bit) LSB */
501 
  PWM_DUTY_CH3_MSB = 31  /**< PWM duty cycle register(31) (r/w): Channel 3 duty cycle (8-bit) MSB */
502 
};
503 
/**@}*/
504 
 
505 
 
506 
/**********************************************************************//**
507 34 zero_gravi 
 * @name IO Device: Custom Functions Unit 0 (CFU0)
508 23 zero_gravi 
 **************************************************************************/
509 
/**@{*/
510 34 zero_gravi 
/** CFU0 register 0 ((r)/(w)) */
511 
#define CFU0_REG_0 (*(IO_REG32 0xFFFFFFC0UL)) // (r)/(w): CFU0 register 0, user-defined
512 
/** CFU0 register 1 ((r)/(w)) */
513 
#define CFU0_REG_1 (*(IO_REG32 0xFFFFFFC4UL)) // (r)/(w): CFU0 register 1, user-defined
514 
/** CFU0 register 2 ((r)/(w)) */
515 
#define CFU0_REG_2 (*(IO_REG32 0xFFFFFFC8UL)) // (r)/(w): CFU0 register 2, user-defined
516 
/** CFU0 register 3 ((r)/(w)) */
517 
#define CFU0_REG_3 (*(IO_REG32 0xFFFFFFCCUL)) // (r)/(w): CFU0 register 3, user-defined
518 2 zero_gravi 
/**@}*/
519 
 
520 
 
521 3 zero_gravi 
/**********************************************************************//**
522 34 zero_gravi 
 * @name IO Device: Custom Functions Unit 1 (CFU1)
523 
 **************************************************************************/
524 
/**@{*/
525 
/** CFU1 register 0 ((r)/(w)) */
526 
#define CFU1_REG_0 (*(IO_REG32 0xFFFFFFD0UL)) // (r)/(w): CFU1 register 0, user-defined
527 
/** CFU1 register 1 ((r)/(w)) */
528 
#define CFU1_REG_1 (*(IO_REG32 0xFFFFFFD4UL)) // (r)/(w): CFU1 register 1, user-defined
529 
/** CFU1 register 2 ((r)/(w)) */
530 
#define CFU1_REG_2 (*(IO_REG32 0xFFFFFFD8UL)) // (r)/(w): CFU1 register 2, user-defined
531 
/** CFU1 register 3 ((r)/(w)) */
532 
#define CFU1_REG_3 (*(IO_REG32 0xFFFFFFDCUL)) // (r)/(w): CFU1 register 3, user-defined
533 
/**@}*/
534 
 
535 
 
536 
/**********************************************************************//**
537 12 zero_gravi 
 * @name IO Device: System Configuration Info Memory (SYSINFO)
538 
 **************************************************************************/
539 
/**@{*/
540 
/** SYSINFO(0): Clock speed */
541 
#define SYSINFO_CLK         (*(IO_ROM32 0xFFFFFFE0UL))
542 
/** SYSINFO(1): Custom user code (via "USER_CODE" generic) */
543 
#define SYSINFO_USER_CODE   (*(IO_ROM32 0xFFFFFFE4UL))
544 
/** SYSINFO(2): Clock speed */
545 
#define SYSINFO_FEATURES    (*(IO_ROM32 0xFFFFFFE8UL))
546 41 zero_gravi 
/** SYSINFO(3): Cache configuration */
547 
#define SYSINFO_CACHE       (*(IO_ROM32 0xFFFFFFECUL))
548 12 zero_gravi 
/** SYSINFO(4): Instruction memory address space base */
549 
#define SYSINFO_ISPACE_BASE (*(IO_ROM32 0xFFFFFFF0UL))
550 
/** SYSINFO(5): Data memory address space base */
551 
#define SYSINFO_DSPACE_BASE (*(IO_ROM32 0xFFFFFFF4UL))
552 23 zero_gravi 
/** SYSINFO(6): Internal instruction memory (IMEM) size in bytes */
553 
#define SYSINFO_IMEM_SIZE   (*(IO_ROM32 0xFFFFFFF8UL))
554 
/** SYSINFO(7): Internal data memory (DMEM) size in bytes */
555 
#define SYSINFO_DMEM_SIZE   (*(IO_ROM32 0xFFFFFFFCUL))
556 12 zero_gravi 
/**@}*/
557 
 
558 
/**********************************************************************//**
559 
 * SYSINFO_FEATURES (r/-): Implemented processor devices/features
560 
 **************************************************************************/
561 
 enum NEORV32_SYSINFO_FEATURES_enum {
562 
  SYSINFO_FEATURES_BOOTLOADER       =  0, /**< SYSINFO_FEATURES  (0) (r/-): Bootloader implemented when 1 (via BOOTLOADER_USE generic) */
563 
  SYSINFO_FEATURES_MEM_EXT          =  1, /**< SYSINFO_FEATURES  (1) (r/-): External bus interface implemented when 1 (via MEM_EXT_USE generic) */
564 
  SYSINFO_FEATURES_MEM_INT_IMEM     =  2, /**< SYSINFO_FEATURES  (2) (r/-): Processor-internal instruction memory implemented when 1 (via MEM_INT_IMEM_USE generic) */
565 
  SYSINFO_FEATURES_MEM_INT_IMEM_ROM =  3, /**< SYSINFO_FEATURES  (3) (r/-): Processor-internal instruction memory implemented as ROM when 1 (via MEM_INT_IMEM_ROM generic) */
566 
  SYSINFO_FEATURES_MEM_INT_DMEM     =  4, /**< SYSINFO_FEATURES  (4) (r/-): Processor-internal data memory implemented when 1 (via MEM_INT_DMEM_USE generic) */
567 40 zero_gravi 
  SYSINFO_FEATURES_MEM_EXT_ENDIAN   =  5, /**< SYSINFO_FEATURES  (5) (r/-): External bus interface uses BIG-endian byte-order when 1 (via package.xbus_big_endian_c constant) */
568 41 zero_gravi 
  SYSINFO_FEATURES_ICACHE           =  6, /**< SYSINFO_FEATURES  (6) (r/-): Processor-internal instruction cache implemented when 1 (via ICACHE_USE generic) */
569 12 zero_gravi 
 
570 
  SYSINFO_FEATURES_IO_GPIO          = 16, /**< SYSINFO_FEATURES (16) (r/-): General purpose input/output port unit implemented when 1 (via IO_GPIO_USE generic) */
571 
  SYSINFO_FEATURES_IO_MTIME         = 17, /**< SYSINFO_FEATURES (17) (r/-): Machine system timer implemented when 1 (via IO_MTIME_USE generic) */
572 
  SYSINFO_FEATURES_IO_UART          = 18, /**< SYSINFO_FEATURES (18) (r/-): Universal asynchronous receiver/transmitter implemented when 1 (via IO_UART_USE generic) */
573 
  SYSINFO_FEATURES_IO_SPI           = 19, /**< SYSINFO_FEATURES (19) (r/-): Serial peripheral interface implemented when 1 (via IO_SPI_USE generic) */
574 
  SYSINFO_FEATURES_IO_TWI           = 20, /**< SYSINFO_FEATURES (20) (r/-): Two-wire interface implemented when 1 (via IO_TWI_USE generic) */
575 
  SYSINFO_FEATURES_IO_PWM           = 21, /**< SYSINFO_FEATURES (21) (r/-): Pulse-width modulation unit implemented when 1 (via IO_PWM_USE generic) */
576 
  SYSINFO_FEATURES_IO_WDT           = 22, /**< SYSINFO_FEATURES (22) (r/-): Watchdog timer implemented when 1 (via IO_WDT_USE generic) */
577 34 zero_gravi 
  SYSINFO_FEATURES_IO_CFU0          = 23, /**< SYSINFO_FEATURES (23) (r/-): Custom functions unit 0 implemented when 1 (via IO_CFU0_USE generic) */
578 
  SYSINFO_FEATURES_IO_TRNG          = 24, /**< SYSINFO_FEATURES (24) (r/-): True random number generator implemented when 1 (via IO_TRNG_USE generic) */
579 
  SYSINFO_FEATURES_IO_CFU1          = 25  /**< SYSINFO_FEATURES (25) (r/-): Custom functions unit 1 implemented when 1 (via IO_CFU1_USE generic) */
580 12 zero_gravi 
};
581 
 
582 41 zero_gravi 
/**********************************************************************//**
583 
 * SYSINFO_CACHE (r/-): Cache configuration
584 
 **************************************************************************/
585 
 enum NEORV32_SYSINFO_CACHE_enum {
586 
  SYSINFO_CACHE_IC_BLOCK_SIZE_0    =  0, /**< SYSINFO_CACHE  (0) (r/-): i-cache: log2(Block size in bytes), bit 0 (via ICACHE_BLOCK_SIZE generic) */
587 
  SYSINFO_CACHE_IC_BLOCK_SIZE_1    =  1, /**< SYSINFO_CACHE  (1) (r/-): i-cache: log2(Block size in bytes), bit 1 (via ICACHE_BLOCK_SIZE generic) */
588 
  SYSINFO_CACHE_IC_BLOCK_SIZE_2    =  2, /**< SYSINFO_CACHE  (2) (r/-): i-cache: log2(Block size in bytes), bit 2 (via ICACHE_BLOCK_SIZE generic) */
589 
  SYSINFO_CACHE_IC_BLOCK_SIZE_3    =  3, /**< SYSINFO_CACHE  (3) (r/-): i-cache: log2(Block size in bytes), bit 3 (via ICACHE_BLOCK_SIZE generic) */
590 12 zero_gravi 
 
591 41 zero_gravi 
  SYSINFO_CACHE_IC_NUM_BLOCKS_0    =  4, /**< SYSINFO_CACHE  (4) (r/-): i-cache: log2(Number of cache blocks/pages/lines), bit 0 (via ICACHE_NUM_BLOCKS generic) */
592 
  SYSINFO_CACHE_IC_NUM_BLOCKS_1    =  5, /**< SYSINFO_CACHE  (5) (r/-): i-cache: log2(Number of cache blocks/pages/lines), bit 1 (via ICACHE_NUM_BLOCKS generic) */
593 
  SYSINFO_CACHE_IC_NUM_BLOCKS_2    =  6, /**< SYSINFO_CACHE  (6) (r/-): i-cache: log2(Number of cache blocks/pages/lines), bit 2 (via ICACHE_NUM_BLOCKS generic) */
594 
  SYSINFO_CACHE_IC_NUM_BLOCKS_3    =  7, /**< SYSINFO_CACHE  (7) (r/-): i-cache: log2(Number of cache blocks/pages/lines), bit 3 (via ICACHE_NUM_BLOCKS generic) */
595 
 
596 
  SYSINFO_CACHE_IC_ASSOCIATIVITY_0 =  8, /**< SYSINFO_CACHE (10) (r/-): i-cache: log2(associativity), bit 0 (always 0 -> direct mapped) */
597 
  SYSINFO_CACHE_IC_ASSOCIATIVITY_1 =  9, /**< SYSINFO_CACHE (11) (r/-): i-cache: log2(associativity), bit 1 (always 0 -> direct mapped) */
598 
  SYSINFO_CACHE_IC_ASSOCIATIVITY_2 = 10, /**< SYSINFO_CACHE (12) (r/-): i-cache: log2(associativity), bit 2 (always 0 -> direct mapped) */
599 
  SYSINFO_CACHE_IC_ASSOCIATIVITY_3 = 11, /**< SYSINFO_CACHE (13) (r/-): i-cache: log2(associativity), bit 3 (always 0 -> direct mapped) */
600 
};
601 
 
602 
 
603 2 zero_gravi 
// ----------------------------------------------------------------------------
604 
// Include all IO driver headers
605 
// ----------------------------------------------------------------------------
606 
// cpu core
607 
#include "neorv32_cpu.h"
608 
 
609 
// neorv32 runtime environment
610 
#include "neorv32_rte.h"
611 
 
612 
// io/peripheral devices
613 26 zero_gravi 
#include "neorv32_cfu.h"
614 2 zero_gravi 
#include "neorv32_gpio.h"
615 
#include "neorv32_mtime.h"
616 
#include "neorv32_pwm.h"
617 
#include "neorv32_spi.h"
618 
#include "neorv32_trng.h"
619 
#include "neorv32_twi.h"
620 
#include "neorv32_uart.h"
621 
#include "neorv32_wdt.h"
622 
 
623 
#endif // neorv32_h

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.