Subversion Repositories openarty

////////////////////////////////////////////////////////////////////////////////

//

// Filename:    xoddrserdes.v

//

// Project:     A wishbone controlled DDR3 SDRAM memory controller.

//

// Purpose:     Provide DDR outputs at 8x the clock rate (with a 4x clock given)

//              for such things as the memory clock output, and the data strobe

//      output (DQS) which needs to be synchronous with the memory clock output.

//

// Creator:     Dan Gisselquist, Ph.D.

//              Gisselquist Technology, LLC

//

////////////////////////////////////////////////////////////////////////////////

//

// Copyright (C) 2015-2016, Gisselquist Technology, LLC

//

// This program is free software (firmware): you can redistribute it and/or

// modify it under the terms of  the GNU General Public License as published

// by the Free Software Foundation, either version 3 of the License, or (at

// your option) any later version.

//

// This program is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with this program.  (It's in the $(ROOT)/doc directory, run make with no

// target there if the PDF file isn't present.)  If not, see

// <http://www.gnu.org/licenses/> for a copy.

//

// License:     GPL, v3, as defined and found on www.gnu.org,

//              http://www.gnu.org/licenses/gpl.html

//

//

////////////////////////////////////////////////////////////////////////////////

//

//

module  xoddrserdes(i_clk_fast, i_clk_slow, i_reset, i_data, o_pin);

        input           i_clk_fast, i_clk_slow, i_reset;

        input   [7:0]    i_data;

        output          o_pin;

        wire            local_monitor_pin__unconnected;

        wire            oe_for_fabric__unconnected;

        wire    [1:0]    local_shiftout__unconnected;

        wire            local_tbyte_out__unconnected;

        wire            send_to_iob;

        wire            oe_for_iob;

        OSERDESE2       #(

                        .DATA_RATE_OQ("DDR"),

                        .DATA_RATE_TQ("BUF"),

                        .DATA_WIDTH(8), // 8 data wires sent per clkdiv

                        .INIT_OQ(1'b1),

                        .SERDES_MODE("MASTER"),

                        // 

                        .TRISTATE_WIDTH(1),

                        .INIT_TQ(1'b1),

                        .TBYTE_CTL("FALSE"),

                        .TBYTE_SRC("FALSE")

                ) oserdes_i(

                        .CLK(i_clk_fast),

                        .CLKDIV(i_clk_slow),

                        .OCE(1'b1),

                        .OFB(local_monitor_pin__unconnected),

                        .OQ(send_to_iob),

                        .RST(i_reset),

                        //

                        .TCE(1'b1),

                        .TQ(oe_for_iob),

                        .TFB(oe_for_fabric__unconnected),

                        .T1(1'b0), .T2(1'b0), .T3(1'b0), .T4(1'b0),

                        //

                        .SHIFTOUT1(local_shiftout__unconnected[0]),

                        .SHIFTOUT2(local_shiftout__unconnected[1]),

                        .SHIFTIN1(1'b0),

                        .SHIFTIN2(1'b0),

                        .TBYTEIN(1'b0),

                        .TBYTEOUT(local_tbyte_out__unconnected),

                        //

                        // And now for the actual data we wish to send

                        //

                        .D1(i_data[0]), .D2(i_data[1]),

                        .D3(i_data[2]), .D4(i_data[3]),

                        .D5(i_data[4]), .D6(i_data[5]),

                        .D7(i_data[6]), .D8(i_data[7])

                );

        OBUF    iobuf_i(.I(send_to_iob), .O(o_pin));

endmodule