URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
#!/bin/bash
# Disable waveform dumping
OMSP_NODUMP=1
export OMSP_NODUMP
# Choose simulator:
# - iverilog : Icarus Verilog (default)
# - cver : CVer
# - verilog : Verilog-XL
# - ncverilog : NC-Verilog
# - vcs : VCS
# - vsim : Modelsim
# - isim : Xilinx simulator
OMSP_SIMULATOR=iverilog
export OMSP_SIMULATOR
rm -rf ./log/*.log
mkdir ./log
# Two-Operand Arithmetic test patterns
../bin/msp430sim two-op_mov | tee ./log/two-op_mov.log
../bin/msp430sim two-op_mov-b | tee ./log/two-op_mov-b.log
../bin/msp430sim two-op_add | tee ./log/two-op_add.log
../bin/msp430sim two-op_add-b | tee ./log/two-op_add-b.log
../bin/msp430sim two-op_addc | tee ./log/two-op_addc.log
../bin/msp430sim two-op_sub | tee ./log/two-op_sub.log
../bin/msp430sim two-op_subc | tee ./log/two-op_subc.log
../bin/msp430sim two-op_cmp | tee ./log/two-op_cmp.log
../bin/msp430sim two-op_bit | tee ./log/two-op_bit.log
../bin/msp430sim two-op_bic | tee ./log/two-op_bic.log
../bin/msp430sim two-op_bis | tee ./log/two-op_bis.log
../bin/msp430sim two-op_xor | tee ./log/two-op_xor.log
../bin/msp430sim two-op_and | tee ./log/two-op_and.log
../bin/msp430sim two-op_dadd | tee ./log/two-op_dadd.log
# Conditional Jump test patterns
../bin/msp430sim c-jump_jeq | tee ./log/c-jump_jeq.log
../bin/msp430sim c-jump_jne | tee ./log/c-jump_jne.log
../bin/msp430sim c-jump_jc | tee ./log/c-jump_jc.log
../bin/msp430sim c-jump_jnc | tee ./log/c-jump_jnc.log
../bin/msp430sim c-jump_jn | tee ./log/c-jump_jn.log
../bin/msp430sim c-jump_jge | tee ./log/c-jump_jge.log
../bin/msp430sim c-jump_jl | tee ./log/c-jump_jl.log
../bin/msp430sim c-jump_jmp | tee ./log/c-jump_jmp.log
# Single-Operand Arithmetic test patterns
../bin/msp430sim sing-op_rrc | tee ./log/sing-op_rrc.log
../bin/msp430sim sing-op_rra | tee ./log/sing-op_rra.log
../bin/msp430sim sing-op_swpb | tee ./log/sing-op_swpb.log
../bin/msp430sim sing-op_sxt | tee ./log/sing-op_sxt.log
../bin/msp430sim sing-op_push | tee ./log/sing-op_push.log
../bin/msp430sim sing-op_call | tee ./log/sing-op_call.log
../bin/msp430sim sing-op_reti | tee ./log/sing-op_reti.log
# ROM Data Read access
../bin/msp430sim two-op_add_rom-rd | tee ./log/two-op_add_rom-rd.log
../bin/msp430sim sing-op_push_rom-rd | tee ./log/sing-op_push_rom-rd.log
../bin/msp430sim sing-op_call_rom-rd | tee ./log/sing-op_call_rom-rd.log
# Power saving modes (CPUOFF, OSCOFF, SCG1)
../bin/msp430sim op_modes | tee ./log/op_modes.log
# Basic clock module
../bin/msp430sim clock_module | tee ./log/clock_module.log
# Serial Debug Interface
../bin/msp430sim dbg_uart | tee ./log/dbg_uart.log
../bin/msp430sim dbg_cpu | tee ./log/dbg_cpu.log
../bin/msp430sim dbg_mem | tee ./log/dbg_mem.log
../bin/msp430sim dbg_hwbrk0 | tee ./log/dbg_hwbrk0.log
../bin/msp430sim dbg_hwbrk1 | tee ./log/dbg_hwbrk1.log
../bin/msp430sim dbg_hwbrk2 | tee ./log/dbg_hwbrk2.log
../bin/msp430sim dbg_hwbrk3 | tee ./log/dbg_hwbrk3.log
../bin/msp430sim dbg_halt_irq | tee ./log/dbg_halt_irq.log
../bin/msp430sim dbg_onoff | tee ./log/dbg_onoff.log
# Watchdog test patterns
../bin/msp430sim wdt_interval | tee ./log/wdt_interval.log
../bin/msp430sim wdt_watchdog | tee ./log/wdt_watchdog.log
../bin/msp430sim wdt_clkmux | tee ./log/wdt_clkmux.log
# GPIO test patterns
../bin/msp430sim gpio_rdwr | tee ./log/gpio_rdwr.log
../bin/msp430sim gpio_irq | tee ./log/gpio_irq.log
# Peripheral templates test patterns
../bin/msp430sim template_periph_8b | tee ./log/template_periph_8b.log
../bin/msp430sim template_periph_16b | tee ./log/template_periph_16b.log
# Timer A patterns
../bin/msp430sim tA_modes | tee ./log/tA_modes.log
../bin/msp430sim tA_compare | tee ./log/tA_compare.log
../bin/msp430sim tA_output | tee ./log/tA_output.log
../bin/msp430sim tA_capture | tee ./log/tA_capture.log
../bin/msp430sim tA_clkmux | tee ./log/tA_clkmux.log
# Hardware multiplier test patterns
../bin/msp430sim mpy_basic | tee ./log/mpy_basic.log
grep SKIPPED ./log/*.log
grep FAILED ./log/*.log
echo ""
echo " ================================"
echo -n "| Number of passed patterns : "
cat ./log/*.log | grep -c PASSED
echo -n "| Number of failed patterns : "
cat ./log/*.log | grep -c FAILED
echo -n "| Number of skipped patterns: "
cat ./log/*.log | grep -c SKIPPED
echo "|--------------------------------"
echo -n "| Number of patterns: "
ls -1 ./log/*.log | wc -l
echo " ================================"
echo " Make sure passed == total"
echo ""
echo ""
